Add support for the Azoteq IQS7210A/7211A/E family of trackpad/
touchscreen controllers.
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/ZHVEeDlYyr69A59K@nixie71
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add bindings for the Azoteq IQS7210A/7211A/E family of trackpad/
touchscreen controllers.
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/ZHVEa0yM1LLUJEfO@nixie71
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The touchpad of this device is both connected via PS/2 and i2c. This causes
strange behavior when both driver fight for control. The easy fix is to
prevent the PS/2 driver from accessing the mouse port as the full feature
set of the touchpad is only supported in the i2c interface anyway.
The strange behavior in this case is, that when an external screen is
connected and the notebook is closed, the pointer on the external screen is
moving to the lower right corner. When the notebook is opened again, this
movement stops, but the touchpad clicks are unresponsive afterwards until
reboot.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230607173331.851192-1-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Userspace is allowed to select any PAGE_SIZE aligned hva to back guest
memory. This is even the case with hugepages, although it is a rather
suboptimal configuration as PTE level mappings are used at stage-2.
The arm64 page aging handlers have an assumption that the specified
range is exactly one page/block of memory, which in the aforementioned
case is not necessarily true. All together this leads to the WARN() in
kvm_age_gfn() firing.
However, the WARN is only part of the issue as the table walkers visit
at most a single leaf PTE. For hugepage-backed memory in a memslot that
isn't hugepage-aligned, page aging entirely misses accesses to the
hugepage beyond the first page in the memslot.
Add a new walker dedicated to handling page aging MMU notifiers capable
of walking a range of PTEs. Convert kvm(_test)_age_gfn() over to the new
walker and drop the WARN that caught the issue in the first place. The
implementation of this walker was inspired by the test_clear_young()
implementation by Yu Zhao [*], but repurposed to address a bug in the
existing aging implementation.
Cc: stable@vger.kernel.org # v5.15
Fixes: 056aad67f8 ("kvm: arm/arm64: Rework gpa callback handlers")
Link: https://lore.kernel.org/kvmarm/20230526234435.662652-6-yuzhao@google.com/
Co-developed-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: Yu Zhao <yuzhao@google.com>
Reported-by: Reiji Watanabe <reijiw@google.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Link: https://lore.kernel.org/r/20230627235405.4069823-1-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
The simple_write_to_buffer() function is designed to handle partial
writes. It returns negatives on error, otherwise it returns the number
of bytes that were able to be copied. This code doesn't check the
return properly. We only know that the first byte is written, the rest
of the buffer might be uninitialized.
There is no need to use the simple_write_to_buffer() function.
Partial writes are prohibited by the "if (*ppos != 0)" check at the
start of the function. Just use memdup_user() and copy the whole
buffer.
Fixes: d3cbb907ae ("netdevsim: add ACL trap reporting cookie as a metadata")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/7c1f950b-3a7d-4252-82a6-876e53078ef7@moroto.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
One-element arrays are deprecated, and we are replacing them with flexible
array members instead. So, replace one-element array with flexible-array
member in struct openpromio.
Address the following warning found after building (with GCC-13) sparc
with sparc64_defconfig:
In function 'opromgetprop',
inlined from 'openprom_sunos_ioctl.isra' at drivers/sbus/char/openprom.c:312:11:
drivers/sbus/char/openprom.c:141:24: warning: array subscript 1 is above array bounds of 'char[1]' [-Warray-bounds=]
141 | op->oprom_array[len] = '\0';
| ~~~~~~~~~~~~~~~^~~~~
In file included from drivers/sbus/char/openprom.c:31:
arch/sparc/include/uapi/asm/openpromio.h: In function 'openprom_sunos_ioctl.isra':
arch/sparc/include/uapi/asm/openpromio.h:16:17: note: while referencing 'oprom_array'
16 | char oprom_array[1]; /* Holds property names and values. */
| ^~~~~~~~~~~
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -Warray-bounds.
This results in no differences in binary output.
Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/322
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Misc. small fixes and hw-id additions.
The following is an automated git shortlog grouped by driver:
Move s2idle quirk from thinkpad-acpi to amd-pmc:
- Move s2idle quirk from thinkpad-acpi to amd-pmc
dell-ddv:
- Fix mangled list in documentation
- Improve error handling
int3472/discrete:
- set variable skl_int3472_regulator_second_sensor storage-class-specifier to static
platform/x86/amd:
- pmf: Add new ACPI ID AMDI0103
- pmc: Add new ACPI ID AMDI000A
- pmc: Apply nvme quirk to HP 15s-eq2xxx
platform/x86/intel/tpmi:
- Prevent overflow for cap_offset
touchscreen_dmi:
- Add info for the Archos 101 Cesium Educ tablet
wmi:
- Replace open coded guid_parse_and_compare()
- Break possible infinite loop when parsing GUID
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmSufa8UHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9xNAAf/Z2LnAAGSq6oKO7x9dLxQeuub/Fbn
cMkPlk56gNYJCI0mIuW+cIBf5HOJhgu3oxCvDgbFS+3m2pziB+0nkA5ZdVxeR4na
yRfPzMLg4PuZKbcBzeboNLGlawdHM09J69brfQTao1PLr1iO8qztEk8qGOgyb4Yc
IWtyw5b3ZVQ+sZrdln2ouDMgAMvFYPyJWgZOZOSWfnR6d5AZK3Zvnevqa606NPsA
+ueor3AegQjwJ/uSXw6fpmjnru5XZWEiu08cZifqZbsNS9ExyWNeG51zbF9WjCMi
R8qYkcp6odbWdFzLDW8DELxGctfttlTs5fiTQ/DEn2nyLLNAnLDpEMwZuw==
=f0+L
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"Misc small fixes and hw-id additions"
* tag 'platform-drivers-x86-v6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: touchscreen_dmi: Add info for the Archos 101 Cesium Educ tablet
platform/x86: dell-ddv: Fix mangled list in documentation
platform/x86: dell-ddv: Improve error handling
platform/x86/amd: pmf: Add new ACPI ID AMDI0103
platform/x86/amd: pmc: Add new ACPI ID AMDI000A
platform/x86/amd: pmc: Apply nvme quirk to HP 15s-eq2xxx
platform/x86: Move s2idle quirk from thinkpad-acpi to amd-pmc
platform/x86: int3472/discrete: set variable skl_int3472_regulator_second_sensor storage-class-specifier to static
platform/x86/intel/tpmi: Prevent overflow for cap_offset
platform/x86: wmi: Replace open coded guid_parse_and_compare()
platform/x86: wmi: Break possible infinite loop when parsing GUID
One-element arrays are deprecated, and we are replacing them with flexible
array members instead. So, replace one-element array with flexible-array
member in direntry_uarea structure, and refactor the rest of the code,
accordingly.
Worth mentioning is that before these changes, the original implementation
was returning two-too many bytes in function direntry_create_vi():
fs/reiserfs/item_ops.c:464: int size = sizeof(struct direntry_uarea);
...
fs/reiserfs/item_ops.c-490- size += (dir_u->entry_count * sizeof(short));
...
fs/reiserfs/item_ops.c-517- return size;
Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/290
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
libfuzzer found the following command could SEGV:
$ perf stat -e cpu/L2,L2/ true
This is because the L2 term rewrites the perf_event_attr type to
PERF_TYPE_HW_CACHE which then fails the PMU lookup for the second
legacy cache term.
The new failure is consistent with repeated hardware terms:
$ perf stat -e cpu/L2,L2/ true
event syntax error: 'cpu/L2,L2/'
\___ Failed to find PMU for type 3
Initial error:
event syntax error: 'cpu/L2,L2/'
\___ Failed to find PMU for type 3
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
$ perf stat -e cpu/cycles,cycles/ true
event syntax error: 'cpu/cycles,cycles/'
\___ Failed to find PMU for type 0
Initial error:
event syntax error: 'cpu/cycles,cycles/'
\___ Failed to find PMU for type 0
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
Committer testing:
Before:
$ perf stat -e cpu/L2,L2/ true
Segmentation fault (core dumped)
$
After:
$ perf stat -e cpu/L2,L2/ true
event syntax error: 'cpu/L2,L2/'
\___ Failed to find PMU for type 3
Initial error:
event syntax error: 'cpu/L2,L2/'
\___ Failed to find PMU for type 3
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
$
Fixes: 6fd1e51915 ("perf parse-events: Support PMUs for legacy cache events")
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20230712065250.1450306-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
- Fix fprobe's rethook release timing issue(1). Release rethook after
ftrace_ops is unregistered so that the rethook is not accessed after
free.
- Fix fprobe's rethook access timing issue(2). Stop rethook before
ftrace_ops is unregistered so that the rethook is NOT keep using
after exiting the unregister_fprobe().
- Fix eprobe cleanup logic. If it attaches to multiple events and failes
to enable one of them, rollback all enabled events correctly.
- Fix fprobe to unlock ftrace recursion lock correctly when it missed
by another running kprobe.
- Cleanup kprobe to remove unnecessary NULL.
- Cleanup kprobe to remove unnecessary 0 initializations.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmStawEbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bMBkIAJYun4zeXsFeUUNVZMP8
UlcyBt/uiB1Ch/t1T1wc55plWIDAvUfN+FEltwhb6MJsQgWEjKJxNcH+oquQeqSH
OkUvV6a8BR73FWbCt1Tm2MQKEG1RHC1R4JCj5GCzP93rQSCnmvr0c1yb6+JKQRx4
aPgWUjDm9vhYlOXS6heHo0hf0MbXDl1kqHjvMU2MXUMk7NtQ2JEo1Whikf7Drl6D
ufNqV54GmtuJhgIWAqSk+qWresRvXy0/5i4ONK1Kmq+pdhssjZ4KFsWFQTIkQzdU
nP8t2EfOp3aglx7ANvEJ+COfFNi0aMnHVBo7BbzsOy7Cq7IZTfD6zOTYSfylGGdA
Uw4=
=RBbc
-----END PGP SIGNATURE-----
Merge tag 'probes-fixes-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
- Fix fprobe's rethook release issues:
- Release rethook after ftrace_ops is unregistered so that the
rethook is not accessed after free.
- Stop rethook before ftrace_ops is unregistered so that the
rethook is NOT used after exiting unregister_fprobe()
- Fix eprobe cleanup logic. If it attaches to multiple events and
failes to enable one of them, rollback all enabled events correctly.
- Fix fprobe to unlock ftrace recursion lock correctly when it missed
by another running kprobe.
- Cleanup kprobe to remove unnecessary NULL.
- Cleanup kprobe to remove unnecessary 0 initializations.
* tag 'probes-fixes-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
fprobe: Ensure running fprobe_exit_handler() finished before calling rethook_free()
kernel: kprobes: Remove unnecessary ‘0’ values
kprobes: Remove unnecessary ‘NULL’ values from correct_ret_addr
fprobe: add unlock to match a succeeded ftrace_test_recursion_trylock
kernel/trace: Fix cleanup logic of enable_trace_eprobe
fprobe: Release rethook after the ftrace_ops is unregistered
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEoEVH9lhNrxiMPSyI7MXwXhnZSjYFAmStXZ8THGJlbnRpc3NA
a2VybmVsLm9yZwAKCRDsxfBeGdlKNosgD/47F/dZe5bk9TskkZUaaO012+m9e1ab
33p1GmFJgDFizO9ItwFr7q+DSfzAegrCogq4jztPBhDlmCHlAVc5UGSUmdmy1g9V
WYMiL2SA6duwfGb82Ted+f26LGiqp98jAfguyXUIqskPXQITIZyPtGUv5ZswK+bh
RNBWSoD8jJ6hN0+FpKxOAqwPI+JHqCDHffkWEC33KiyP/+aBoa6qtvjRqTJVU4bb
y+hNBbkN6Wjj+gwlMWyTLnk6uHpcZCP+ye2SPHWTfFrr+SGFlhPNroosQijEycZU
uMTULMhWZiNd6zkRGGNs0bontjMcuko1wr5fkiM2jCd2Gft7MjvPeV9kLChtR35j
L2ybAJ8OfznhQ46GnqtaadybnF1M4CyWL4EWzpBQuqy+Xnp3GYLDUlqIJHtEMDjD
/8QDh3j5P4bgUkjGFBkPOnHson3/NnNujIN3fMl8Wn/GfTky5SR9Usx7CH8cnyji
JEoPfrLNwgRIVuInGxOxxpgq6YeK3MtRwR656PNacEcd6rMCEaegghVlLPX84zna
IixAbfjshakaZ9s0ONzkDzjLyEW/aCzMGVgr0SZfvcHfGlfqRYMJqDAHoKof5YLj
XdPcgM3rttzFffmb+/tR6c/UKXfFNrdITopS1+m59WG+Bowh/qXBShMbDTbNHVt5
EOWUdKl/FnJhQA==
=Syiu
-----END PGP SIGNATURE-----
Merge tag 'for-linus-2023071101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Benjamin Tissoires:
- AMD SFH shift-out-of-bounds fix (Basavaraj Natikar)
- avoid struct memcpy overrun warning in the hid-hyperv module (Arnd
Bergmann)
- a quick HID kselftests script fix for our CI to be happy (Benjamin
Tissoires)
- various fixes and additions of device IDs
* tag 'for-linus-2023071101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: amd_sfh: Fix for shift-out-of-bounds
HID: amd_sfh: Rename the float32 variable
HID: input: fix mapping for camera access keys
HID: logitech-hidpp: Add wired USB id for Logitech G502 Lightspeed
HID: nvidia-shield: Pack inner/related declarations in HOSTCMD reports
HID: hyperv: avoid struct memcpy overrun warning
selftests: hid: fix vmtests.sh not running make headers
A bug was introduced in deadline_from_pos() while implementing the
suggestion to use round_down() in the following code:
pos -= bdev_offset_from_zone_start(rq->q->disk->part0, pos);
This patch makes deadline_from_pos() use round_down() such that 'pos' is
rounded down.
Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Closes: https://lore.kernel.org/all/5zthzi3lppvcdp4nemum6qck4gpqbdhvgy4k3qwguhgzxc4quj@amulvgycq67h/
Cc: Christoph Hellwig <hch@lst.de>
Cc: Damien Le Moal <dlemoal@kernel.org>
Fixes: 0effb390c4 ("block: mq-deadline: Handle requeued requests correctly")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230712173344.2994513-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linksys ea6500-v2 have 256MB of ram. Currently we only use 128MB.
Expand the definition to use all the available RAM.
Fixes: 03e96644d7 ("ARM: dts: BCM5301X: Add basic DT for Linksys EA6500 V2")
Signed-off-by: Aleksey Nasibulin <alealexpro100@ya.ru>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org
Acked-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20230712014017.28123-1-ansuelsmth@gmail.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
BCM53573 is a family derived from Northstar with some important
differences:
1. Cortex-A9 replaced by Cortex-A7
2. XHCI controller dropped
3. Two Ethernet interfaces removed
4. Two 802.11ac cores embedded
Linux already contains DTS files for some on those devices so add a
proper binding for it.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230710175944.32631-1-zajec5@gmail.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Switch away from deprecated properties.
This fixes:
arch/arm/boot/dts/broadcom/bcm947189acdbmr.dtb: spi: gpio-sck: False schema does not allow [[3, 21, 0]]
From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml
arch/arm/boot/dts/broadcom/bcm947189acdbmr.dtb: spi: gpio-miso: False schema does not allow [[3, 22, 0]]
From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml
arch/arm/boot/dts/broadcom/bcm947189acdbmr.dtb: spi: gpio-mosi: False schema does not allow [[3, 23, 0]]
From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml
arch/arm/boot/dts/broadcom/bcm947189acdbmr.dtb: spi: 'sck-gpios' is a required property
From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml
arch/arm/boot/dts/broadcom/bcm947189acdbmr.dtb: spi: Unevaluated properties are not allowed ('gpio-miso', 'gpio-mosi', 'gpio-sck' were unexpected)
From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20230707114004.2740-4-zajec5@gmail.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
This fixes:
arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dtb: pcie@2000: '#address-cells' is a required property
From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml
arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dtb: pcie@2000: '#size-cells' is a required property
From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml
Two properties that need to be added later are "device_type" and
"ranges". Adding "device_type" on its own causes a new warning and the
value of "ranges" needs to be determined yet.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20230707114004.2740-3-zajec5@gmail.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Such property simply doesn't exist (is not documented or used anywhere).
This fixes:
arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dtb: usb@d000: Unevaluated properties are not allowed ('#usb-cells' was unexpected)
From schema: Documentation/devicetree/bindings/usb/generic-ohci.yaml
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20230707114004.2740-2-zajec5@gmail.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
There is no such trigger documented or implemented in Linux. It was a
copy & paste mistake.
This fixes:
arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dtb: leds: led-wlan:linux,default-trigger: 'oneOf' conditional failed, one must be fixed:
'default-off' is not one of ['backlight', 'default-on', 'heartbeat', 'disk-activity', 'disk-read', 'disk-write', 'timer', 'pattern', 'audio-micmute', 'audio-mute', 'bluetooth-power', 'flash', 'kbd-capslock', 'mtd', 'nand-disk', 'none', 'torch', 'usb-gadget', 'usb-host', 'usbport']
'default-off' does not match '^cpu[0-9]*$'
'default-off' does not match '^hci[0-9]+-power$'
'default-off' does not match '^mmc[0-9]+$'
'default-off' does not match '^phy[0-9]+tx$'
From schema: Documentation/devicetree/bindings/leds/leds-gpio.yaml
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20230707114004.2740-1-zajec5@gmail.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Northstar SoCs have 3 usable Ethernet interfaces each connected to one
of switch ports. They all use fixed links.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20230707091519.21673-1-zajec5@gmail.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
After converting the bcm2835-dma DT binding to YAML, the DT schema
checks gave warnings like:
$nodename:0: 'dma@7e007000' does not match '^dma-controller(@.*)?$'
So fix them accordingly.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/20230617133620.53129-4-stefan.wahren@i2se.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Currently the dtbs_check for bcm2837 generates warnings like this:
gpio@7e200000: 'pinctrl-0' is a dependency of 'pinctrl-names'
This is caused by the definition of pinctrl-names without matching
pinctrl group and vice versa. So defining both at the same place
make the dts files easier to review.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/20230617133620.53129-2-stefan.wahren@i2se.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
ACPI ISA strings are based on a specification after Zicsr and Zifencei
were split out of I, so we shouldn't be treating them as part of I. We
haven't release an ACPI-based kernel yet, so we don't need to worry
about compatibility with the old ISA strings.
Fixes: 07edc32779 ("RISC-V: always report presence of extensions formerly part of the base ISA")
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Link: https://lore.kernel.org/r/20230711224600.10879-1-palmer@rivosinc.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
SoundWire device status can be incorrectly updated without
proper mask, fix this by adding a mask before updating the status.
Fixes: c7d49c76d1 ("soundwire: qcom: add support to new interrupts")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230525133812.30841-2-srinivas.kandagatla@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The soundwire subsystem uses two completion structures that allow
drivers to wait for soundwire device to become enumerated on the bus and
initialised by their drivers, respectively.
The code implementing the signalling is currently broken as it does not
signal all current and future waiters and also uses the wrong
reinitialisation function, which can potentially lead to memory
corruption if there are still waiters on the queue.
Not signalling future waiters specifically breaks sound card probe
deferrals as codec drivers can not tell that the soundwire device is
already attached when being reprobed. Some codec runtime PM
implementations suffer from similar problems as waiting for enumeration
during resume can also timeout despite the device already having been
enumerated.
Fixes: fb9469e54f ("soundwire: bus: fix race condition with enumeration_complete signaling")
Fixes: a90def0681 ("soundwire: bus: fix race condition with initialization_complete signaling")
Cc: stable@vger.kernel.org # 5.7
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230705123018.30903-2-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Due to limited available frequency ratios, the reference clock rate may
not be exactly the same as the required rate. Allow a small (100 ppm)
deviation.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Link: https://lore.kernel.org/r/20230711194542.898230-1-sean.anderson@seco.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Populate offsets configuration for the rest of UFS PHYs to make it
possible to switch them to the new (single-node) bindings style.
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230711145153.4167820-3-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Migrate legacy bindings (described in qcom,msm8996-qmp-ufs-phy.yaml)
to qcom,sc8280xp-qmp-ufs-phy.yaml. This removes a need to declare
the child PHY node or split resource regions.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230711145153.4167820-2-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add StarFive JH7110 SoC PCIe 2.0 PHY dt-binding.
PCIe PHY0 (phy@10210000) can be used as USB 3.0 PHY.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20230629075115.11934-3-minda.chen@starfivetech.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add single link SGMII register configuration for no SSC for
cdns,sierra-phy-t0 compatibility string.
The configuration is based on Sierra Programmer's Guide and
validated in Cisco CrayAR SoC.
Co-developed-by: Bartosz Wawrzyniak <bwawrzyn@cisco.com>
Signed-off-by: Bartosz Wawrzyniak <bwawrzyn@cisco.com>
Signed-off-by: Marcin Wierzbicki <mawierzb@cisco.com>
Link: https://lore.kernel.org/r/20230626105533.2999966-1-mawierzb@cisco.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This adds a bunch of new pixel clock- and tmds rates to the pre-pll
table which are required to get more VESA and some DMT rates working.
It has been completely re-calculated to match the min- and max-vco of
(750 MHz - 3.2 GHz) requirements. If more than one configuration would
have been possible the lowest fbdiv and refdiv (and therefore lowest
vco rate) has been preferred.
It's important to note, that RK3228 version of the phy does not support
fractional dividers. To support the most possible rates for this version
also in both 8-bit and 10-bit variant, some rates are not exact. The
maximum deviation of the pixel clock is 0.26, which perfectly fits into
VESA DMT recommendation of 0.5%.
I tested all possible rates on several screens from different
manufacturers with both RK3228 and RK3328. Both pre- and post-PLL
locking are slighlty faster now.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20230615171005.2251032-7-jonas@kwiboo.se
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Regular 8-bit and Deep Color video formats mainly differ in TMDS rate and
not in pixel clock rate.
When the hdmiphy clock is configured with the same pixel clock rate using
clk_set_rate() the clock framework do not signal the hdmi phy driver
to set_rate when switching between 8-bit and Deep Color.
This result in pre/post pll not being re-configured when switching between
regular 8-bit and Deep Color video formats.
Fix this by calling set_rate in power_on to force pre pll re-configuration.
Signed-off-by: Huicong Xu <xhc@rock-chips.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20230615171005.2251032-6-jonas@kwiboo.se
Signed-off-by: Vinod Koul <vkoul@kernel.org>
inno_write is used to configure 0xaa reg, that also hold the
POST_PLL_POWER_DOWN bit.
When POST_PLL_REFCLK_SEL_TMDS is configured the power down bit is not
taken into consideration.
Fix this by keeping the power down bit until configuration is complete.
Also reorder the reg write order for consistency.
Fixes: 53706a1168 ("phy: add Rockchip Innosilicon hdmi phy")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20230615171005.2251032-5-jonas@kwiboo.se
Signed-off-by: Vinod Koul <vkoul@kernel.org>
inno_hdmi_phy_rk3328_clk_recalc_rate() is returning a rate not found
in the pre pll config table when the fractal divider is used.
This can prevent proper power_on because a tmdsclock for the new rate
is not found in the pre pll config table.
Fix this by saving and returning a rounded pixel rate that exist
in the pre pll config table.
Fixes: 53706a1168 ("phy: add Rockchip Innosilicon hdmi phy")
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20230615171005.2251032-3-jonas@kwiboo.se
Signed-off-by: Vinod Koul <vkoul@kernel.org>
inno_hdmi_phy_rk3328_clk_set_rate() is using the RK3228 macro
when configuring vco_div_5 on RK3328.
Fix this by using correct vco_div_5 macro for RK3328.
Fixes: 53706a1168 ("phy: add Rockchip Innosilicon hdmi phy")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20230615171005.2251032-2-jonas@kwiboo.se
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The only difference between qmp_v6_dp_aux_init() and
qmp_v4_dp_aux_init() is the address of COM_BIAS_EN_CLKBUFLR_EN register.
Move it to register layout and drop the duplicate function.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230621153317.1025914-7-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The functions qmp_v5_configure_dp_phy() and qmp_v6_configure_dp_phy()
are now copies of qmp_v4_configure_dp_phy(). Drop them and use the v4
function in all the cases.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230621153317.1025914-6-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>