In several catalog entries we did not use existing MSM_DP_CONTROLLER_n
constants. Fill them in. Also use freshly defined MSM_DSI_CONTROLLER_n
for DSI interfaces.
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Tested-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/545353/
Link: https://lore.kernel.org/r/20230704022136.130522-3-dmitry.baryshkov@linaro.org
Since struct drm_dsc_config is stored at atomic_enable() instead
of display setup time during boot up, saving struct drm_dsc_config
at struct msm_display_info is not necessary. Lets drop the dsc member
from struct msm_display_info.
Changes in v4:
-- fix "Since" at commit text
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/543866/
Link: https://lore.kernel.org/r/1687454686-10340-3-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Currently struct drm_dsc_config for DSI is populated at display
setup during system boot up. This mechanism works fine with
embedded display but not for pluggable displays as the
struct drm_dsc_config will become stale once external display
is unplugged.
In preparation of adding support for DP DSC support
move storing of DSI DSC struct to atomic_enable() so that same
mechanism will work for both embedded display and pluggable
displays.
Changes in v4:
-- fix checkpatch.pl warning
Changes in v5:
-- delete dpu_encoder_get_dsc_config() from atomic_mode_set
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/543867/
Link: https://lore.kernel.org/r/1687454686-10340-2-git-send-email-quic_khsieh@quicinc.com
[DB: fixed commit message]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
There are cases where a metric requires more events than the number of
available counters. E.g. AMD Zen, Zen 2 and Zen 3 processors have four
data fabric counters but the "nps1_die_to_dram" metric has eight events.
By default, the constituent events are placed in a group and since the
events cannot be scheduled at the same time, the metric is not computed.
The "all metrics" test also fails because of this.
Use the NO_GROUP_EVENTS constraint for such metrics which anyway expect
the user to run perf with "--metric-no-group".
E.g.
$ sudo perf test -v 101
Before:
101: perf all metrics test :
--- start ---
test child forked, pid 37131
Testing branch_misprediction_ratio
Testing all_remote_links_outbound
Testing nps1_die_to_dram
Metric 'nps1_die_to_dram' not printed in:
Error:
Invalid event (dram_channel_data_controller_4) in per-thread mode, enable system wide with '-a'.
Testing macro_ops_dispatched
Testing all_l2_cache_accesses
Testing all_l2_cache_hits
Testing all_l2_cache_misses
Testing ic_fetch_miss_ratio
Testing l2_cache_accesses_from_l2_hwpf
Testing l2_cache_misses_from_l2_hwpf
Testing op_cache_fetch_miss_ratio
Testing l3_read_miss_latency
Testing l1_itlb_misses
test child finished with -1
---- end ----
perf all metrics test: FAILED!
After:
101: perf all metrics test :
--- start ---
test child forked, pid 43766
Testing branch_misprediction_ratio
Testing all_remote_links_outbound
Testing nps1_die_to_dram
Testing macro_ops_dispatched
Testing all_l2_cache_accesses
Testing all_l2_cache_hits
Testing all_l2_cache_misses
Testing ic_fetch_miss_ratio
Testing l2_cache_accesses_from_l2_hwpf
Testing l2_cache_misses_from_l2_hwpf
Testing op_cache_fetch_miss_ratio
Testing l3_read_miss_latency
Testing l1_itlb_misses
test child finished with 0
---- end ----
perf all metrics test: Ok
Reported-by: Ayush Jain <ayush.jain3@amd.com>
Suggested-by: Ian Rogers <irogers@google.com>
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Link: https://lore.kernel.org/r/20230706063440.54189-1-sandipan.das@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-L only specifies the search path for libraries directly provided in the
link line with -l. Because -lopencsd isn't specified, it's only linked
because it's a dependency of -lopencsd_c_api. Dependencies like this are
resolved using the default system search paths or -rpath-link=... rather
than -L. This means that compilation only works if OpenCSD is installed
to the system rather than provided with the CSLIBS (-L) option.
This could be fixed by adding -Wl,-rpath-link=$(CSLIBS) but that is less
conventional than just adding -lopencsd to the link line so that it uses
-L. -lopencsd seems to have been removed in commit ed17b19149
("perf tools: Drop requirement for libstdc++.so for libopencsd check")
because it was thought that there was a chance compilation would work
even if it didn't exist, but I think that only applies to libstdc++ so
there is no harm to add it back. libopencsd.so and libopencsd_c_api.so
would always exist together.
Testing
=======
The following scenarios now all work:
* Cross build with OpenCSD installed
* Cross build using CSLIBS=...
* Native build with OpenCSD installed
* Native build using CSLIBS=...
* Static cross build with OpenCSD installed
* Static cross build with CSLIBS=...
Committer testing:
⬢[acme@toolbox perf-tools]$ alias m
alias m='make -k BUILD_BPF_SKEL=1 CORESIGHT=1 O=/tmp/build/perf-tools -C tools/perf install-bin && git status && perf test python ; perf record -o /dev/null sleep 0.01 ; perf stat --null sleep 0.01'
⬢[acme@toolbox perf-tools]$ ldd ~/bin/perf | grep csd
libopencsd_c_api.so.1 => /lib64/libopencsd_c_api.so.1 (0x00007fd49c44e000)
libopencsd.so.1 => /lib64/libopencsd.so.1 (0x00007fd49bd56000)
⬢[acme@toolbox perf-tools]$ cat /etc/redhat-release
Fedora release 36 (Thirty Six)
⬢[acme@toolbox perf-tools]$
Fixes: ed17b19149 ("perf tools: Drop requirement for libstdc++.so for libopencsd check")
Reported-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Signed-off-by: James Clark <james.clark@arm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
Cc: coresight@lists.linaro.org
Closes: https://lore.kernel.org/linux-arm-kernel/56905d7a-a91e-883a-b707-9d5f686ba5f1@arm.com/
Link: https://lore.kernel.org/all/36cc4dc6-bf4b-1093-1c0a-876e368af183@kleine-koenig.org/
Link: https://lore.kernel.org/r/20230707154546.456720-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
81b1b599df ("drm/i915: Allow user to set cache at BO creation")
98d2722a85 ("drm/i915/huc: differentiate the 2 steps of the MTL HuC auth flow")
bc4be0a38b ("drm/i915/pmu: Prepare for multi-tile non-engine counters")
d1da138f24 ("drm/i915/uapi/pxp: Add a GET_PARAM for PXP")
That adds some ioctls but use the __I915_PMU_OTHER() macro, not
supported yet in the tools/perf/trace/beauty/drm_ioctl.sh conversion
script.
This silences this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Fei Yang <fei.yang@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://lore.kernel.org/lkml/ZK1R%2FIyWcUKYQbQV@kernel.org/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
After switching from dwarf_decl_file() to die_get_decl_file(), it is not
possible to add probes for certain functions:
$ perf probe -x /usr/lib/systemd/systemd-logind match_unit_removed
A function DIE doesn't have decl_line. Maybe broken DWARF?
A function DIE doesn't have decl_line. Maybe broken DWARF?
Probe point 'match_unit_removed' not found.
Error: Failed to add events.
The problem is that die_get_decl_file() uses the wrong CU to search for
the file. elfutils commit e1db5cdc9f has some good explanation for this:
dwarf_decl_file uses dwarf_attr_integrate to get the DW_AT_decl_file
attribute. This means the attribute might come from a different DIE
in a different CU. If so, we need to use the CU associated with the
attribute, not the original DIE, to resolve the file name.
This patch uses the same source of information as elfutils: use attribute
DW_AT_decl_file and use this CU to search for the file.
Fixes: dc9a5d2ccd ("perf probe: Fix to get declared file name from clang DWARF5")
Signed-off-by: Georg Müller <georgmueller@gmx.net>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: regressions@lists.linux.dev
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230628084551.1860532-6-georgmueller@gmx.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds a test to validate that 'perf probe' works for binaries
where DWARF info is split into multiple CUs
Signed-off-by: Georg Müller <georgmueller@gmx.net>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: regressions@lists.linux.dev
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230628084551.1860532-5-georgmueller@gmx.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Station P2 is a single board computer by firefly based
on rk3568 soc
Signed-off-by: Furkan Kardame <f.kardame@manjaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230620184746.55391-2-f.kardame@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
200MHz is the default rk3588 emmc max-frequency added in dtsi, so why
the board DT files are adding the same value explicitly?
Drop that unchanged property value.
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Link: https://lore.kernel.org/r/20230621064507.479891-1-jagan@edgeble.ai
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add board-specific devicetree file for the RK3399T-based Radxa ROCK 4SE
board. This board offers similar peripherals in a similar form-factor to
the existing ROCK Pi 4B but uses the cost-optimised RK3399T processor
(which has different OPP table than the RK3399) and other minimal hardware
changes.
Signed-off-by: Christopher Obbard <chris.obbard@collabora.com>
Link: https://lore.kernel.org/r/20230710115025.507439-4-chris.obbard@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add devicetree binding entry for the Radxa ROCK 4SE.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Christopher Obbard <chris.obbard@collabora.com>
Link: https://lore.kernel.org/r/20230710115025.507439-3-chris.obbard@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The ROCK 4SE uses the RK3399-T variant of the RK3399 SoC, which has some
changes to the OPP tables. Prepare for the bringup of this SoC by moving
the inclusion of existing OPP tables from the common devicetree into
each board-specific devicetree.
Signed-off-by: Christopher Obbard <chris.obbard@collabora.com>
Link: https://lore.kernel.org/r/20230710115025.507439-2-chris.obbard@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
To simplify with maintenance let's move the mediatek power-domain drivers
to the new genpd directory. Going forward, patches are intended to be
managed through a separate git tree, according to MAINTAINERS.
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: <linux-mediatek@lists.infradead.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
To simplify with maintenance let's move the imx power-domain drivers to the
new genpd directory. Going forward, patches are intended to be managed
through a separate git tree, according to MAINTAINERS.
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: <kernel@pengutronix.de>
Cc: <linux-imx@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
To simplify with maintenance let's move the bcm power-domain drivers to the
new genpd directory. Going forward, patches are intended to be managed
through a separate git tree, according to MAINTAINERS.
While moving the drivers, we end up with a directory for bcm63xx that only
contains a Kconfig file, which seems a bit silly. Let's therefore also move
the Kconfig options into the Kconfig file a directory above, as it allows
us to drop the directory too.
Cc: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: <linux-mips@vger.kernel.org>
Cc: <linux-rpi-kernel@lists.infradead.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
To simplify with maintenance let's move the apple power-domain driver to
the new genpd directory. Going forward, patches are intended to be managed
through a separate git tree, according to MAINTAINERS.
Cc: Hector Martin <marcan@marcan.st>
Cc: Sven Peter <sven@svenpeter.dev>
Cc: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Cc: <asahi@lists.linux.dev>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
To simplify with maintenance let's move the amlogic power-domain drivers to
the new genpd directory. Going forward, patches are intended to be managed
through a separate git tree, according to MAINTAINERS.
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: <linux-amlogic@lists.infradead.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
To simplify with maintenance let's move the action power-domain driver to
the new genpd directory. Going forward, patches are intended to be managed
through a separate git tree, according to MAINTAINERS.
Cc: "Andreas Färber" <afaerber@suse.de>
Cc: Manivannan Sadhasivam <mani@kernel.org>
Cc: <linux-actions@lists.infradead.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
There are currently ~60 users of the genpd provider interface, which
implementations are sprinkled across various subsystems. To simplify with
maintenance let's create a new subsystem (drivers/genpd) and start moving
the providers in there.
My intention is also to host a git tree to collect and to get the patches
tested/integrated through the linux-next tree. Ideally this should release
some of the burden on the soc maintainers.
Note that, I will of course require acks/reviews from the current platform
maintainers, hence the MAINTAINERS file needs to be updated accordingly for
each genpd provider that is moved into the new genpd subsystem.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Enable ADC support for Rock 5A, which has the following ADC channels:
Channel 0 = Boot Mode Config
Channel 1 = Recovery Key
Channel 2 = PWM Fan
Channel 3 = Headphone Hook
Channel 4 = System Input Voltage
Channel 5 = Board ID Config
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230710165228.105983-13-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
I2C3 is routed to the Camera connector and I2C5 is routed to the LCD
connector. On I2C5 additionally there is an unpopulated footprint for
a HYM8563TS RTC.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230710165228.105983-12-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add analog audio support based on the Everest Semi ES8316 codec.
Note, that this currently does not support headphone plug events. The
Rock 5A uses a different headphone jack with a different logic to detect
a headphone plug. Unfortunately the detect GPIO is always low.
Downstream uses an ADC channel instead, but that is currently not
supported upstream.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230710165228.105983-9-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The RK8602 and RK8603 voltage regulators on the Rock 5A board provide
the power lines vdd_cpu_big0 and vdd_cpu_big1, respectively.
Add the necessary device tree nodes and bind them to the corresponding
CPU big core nodes.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230710165228.105983-5-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This adds PMIC support for the Radxa ROCK 5A
Co-developed-by: shengfei Xu <xsf@rock-chips.com>
Signed-off-by: shengfei Xu <xsf@rock-chips.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230710165228.105983-4-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add binding for Belling BL24C16A, which is compatible with Atmel 24C16.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230710165228.105983-3-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Rename SPI_MASTER_GPIO_SS to SPI_CONTROLLER_GPIO_SS and
convert the users to SPI_CONTROLLER_GPIO_SS to follow
the new naming shema.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230710154932.68377-14-andriy.shevchenko@linux.intel.com
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>