Commit graph

1,215,304 commits

Author SHA1 Message Date
Marek Vasut
2f38de940f ARM: dts: stm32: Add missing detach mailbox for DHCOR SoM
Add missing "detach" mailbox to this board to permit the CPU to inform
the remote processor on a detach. This signal allows the remote processor
firmware to stop IPC communication and to reinitialize the resources for
a re-attach.

Without this mailbox, detach is not possible and kernel log contains the
following warning to, so make sure all the STM32MP15xx platform DTs are
in sync regarding the mailboxes to fix the detach issue and the warning:
"
stm32-rproc 10000000.m4: mbox_request_channel_byname() could not locate channel named "detach"
"

Fixes: 6257dfc1c4 ("ARM: dts: stm32: Add coprocessor detach mbox on stm32mp15x-dkx boards")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2023-07-11 15:11:34 +02:00
Marek Vasut
deb7edbc27 ARM: dts: stm32: Add missing detach mailbox for DHCOM SoM
Add missing "detach" mailbox to this board to permit the CPU to inform
the remote processor on a detach. This signal allows the remote processor
firmware to stop IPC communication and to reinitialize the resources for
a re-attach.

Without this mailbox, detach is not possible and kernel log contains the
following warning to, so make sure all the STM32MP15xx platform DTs are
in sync regarding the mailboxes to fix the detach issue and the warning:
"
stm32-rproc 10000000.m4: mbox_request_channel_byname() could not locate channel named "detach"
"

Fixes: 6257dfc1c4 ("ARM: dts: stm32: Add coprocessor detach mbox on stm32mp15x-dkx boards")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2023-07-11 15:09:43 +02:00
Marek Vasut
966f04a89d ARM: dts: stm32: Add missing detach mailbox for Odyssey SoM
Add missing "detach" mailbox to this board to permit the CPU to inform
the remote processor on a detach. This signal allows the remote processor
firmware to stop IPC communication and to reinitialize the resources for
a re-attach.

Without this mailbox, detach is not possible and kernel log contains the
following warning to, so make sure all the STM32MP15xx platform DTs are
in sync regarding the mailboxes to fix the detach issue and the warning:
"
stm32-rproc 10000000.m4: mbox_request_channel_byname() could not locate channel named "detach"
"

Fixes: 6257dfc1c4 ("ARM: dts: stm32: Add coprocessor detach mbox on stm32mp15x-dkx boards")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2023-07-11 15:05:54 +02:00
Marek Vasut
0ee0ef38aa ARM: dts: stm32: Add missing detach mailbox for emtrion emSBC-Argon
Add missing "detach" mailbox to this board to permit the CPU to inform
the remote processor on a detach. This signal allows the remote processor
firmware to stop IPC communication and to reinitialize the resources for
a re-attach.

Without this mailbox, detach is not possible and kernel log contains the
following warning to, so make sure all the STM32MP15xx platform DTs are
in sync regarding the mailboxes to fix the detach issue and the warning:
"
stm32-rproc 10000000.m4: mbox_request_channel_byname() could not locate channel named "detach"
"

Fixes: 6257dfc1c4 ("ARM: dts: stm32: Add coprocessor detach mbox on stm32mp15x-dkx boards")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2023-07-11 15:05:50 +02:00
Neil Armstrong
3cb11fe244 interconnect: qcom: sa8775p: add enable_mask for bcm nodes
Set the proper enable_mask the ACV node requiring such value
to be used instead of a bandwidth when voting.

The masks was copied from the downstream implementation at [1].

[1] https://git.codelinaro.org/clo/la/kernel/msm-5.15/-/blob/kernel.lnx.5.15.r32-rel/drivers/interconnect/qcom/lemans.c

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230619-topic-sm8550-upstream-interconnect-mask-vote-v2-4-709474b151cc@linaro.org
Fixes: 3655a63f96 ("interconnect: qcom: add a driver for sa8775p")
Signed-off-by: Georgi Djakov <djakov@kernel.org>
2023-07-11 15:44:43 +03:00
Neil Armstrong
0dc82bd9e4 interconnect: qcom: sm8550: add enable_mask for bcm nodes
Set the proper enable_mask to nodes requiring such value
to be used instead of a bandwidth when voting.

The masks were copied from the downstream implementation at [1].

[1] https://git.codelinaro.org/clo/la/kernel/msm-5.15/-/blob/kernel.lnx.5.15.r1-rel/drivers/interconnect/qcom/kalama.c

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230619-topic-sm8550-upstream-interconnect-mask-vote-v2-3-709474b151cc@linaro.org
Fixes: e6f0d6a30f ("interconnect: qcom: Add SM8550 interconnect provider driver")
Signed-off-by: Georgi Djakov <djakov@kernel.org>
2023-07-11 15:43:55 +03:00
Neil Armstrong
be02db24cf interconnect: qcom: sm8450: add enable_mask for bcm nodes
Set the proper enable_mask to nodes requiring such value
to be used instead of a bandwidth when voting.

The masks were copied from the downstream implementation at [1].

[1] https://git.codelinaro.org/clo/la/kernel/msm-5.10/-/blob/KERNEL.PLATFORM.1.0.r2-05600-WAIPIOLE.0/drivers/interconnect/qcom/waipio.c

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230619-topic-sm8550-upstream-interconnect-mask-vote-v2-2-709474b151cc@linaro.org
Fixes: fafc114a46 ("interconnect: qcom: Add SM8450 interconnect provider driver")
Signed-off-by: Georgi Djakov <djakov@kernel.org>
2023-07-11 15:41:27 +03:00
Andy Shevchenko
90366cd601
spi: Get rid of old SPI_MASTER_MUST_TX & SPI_MASTER_MUST_RX
Convert the users from SPI_MASTER_MUST_TX and/or SPI_MASTER_MUST_RX
to SPI_CONTROLLER_MUST_TX and/or SPI_CONTROLLER_MUST_RX respectively
and kill the not used anymore definitions.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230710154932.68377-13-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-07-11 13:41:25 +01:00
Andy Shevchenko
c397f09e54
spi: Get rid of old SPI_MASTER_NO_TX & SPI_MASTER_NO_RX
Convert the users from SPI_MASTER_NO_TX and/or SPI_MASTER_NO_RX
to SPI_CONTROLLER_NO_TX and/or SPI_CONTROLLER_NO_RX respectively
and kill the not used anymore definitions.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230710154932.68377-12-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-07-11 13:41:20 +01:00
Mike Tipton
d8630f050d interconnect: qcom: Add support for mask-based BCMs
Some BCMs aren't directly associated with the data path (i.e. ACV) and
therefore don't communicate using BW. Instead, they are simply
enabled/disabled with a simple bit mask. Add support for these.

Origin commit retrieved from:
2d1573e020

Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
[narmstrong: removed copyright change from original commit]
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230619-topic-sm8550-upstream-interconnect-mask-vote-v2-1-709474b151cc@linaro.org
Fixes: fafc114a46 ("interconnect: qcom: Add SM8450 interconnect provider driver")
Signed-off-by: Georgi Djakov <djakov@kernel.org>
2023-07-11 15:40:59 +03:00
gaoming
daf60d6cca exfat: use kvmalloc_array/kvfree instead of kmalloc_array/kfree
The call stack shown below is a scenario in the Linux 4.19 kernel.
Allocating memory failed where exfat fs use kmalloc_array due to
system memory fragmentation, while the u-disk was inserted without
recognition.
Devices such as u-disk using the exfat file system are pluggable and
may be insert into the system at any time.
However, long-term running systems cannot guarantee the continuity of
physical memory. Therefore, it's necessary to address this issue.

Binder:2632_6: page allocation failure: order:4,
 mode:0x6040c0(GFP_KERNEL|__GFP_COMP), nodemask=(null)
Call trace:
[242178.097582]  dump_backtrace+0x0/0x4
[242178.097589]  dump_stack+0xf4/0x134
[242178.097598]  warn_alloc+0xd8/0x144
[242178.097603]  __alloc_pages_nodemask+0x1364/0x1384
[242178.097608]  kmalloc_order+0x2c/0x510
[242178.097612]  kmalloc_order_trace+0x40/0x16c
[242178.097618]  __kmalloc+0x360/0x408
[242178.097624]  load_alloc_bitmap+0x160/0x284
[242178.097628]  exfat_fill_super+0xa3c/0xe7c
[242178.097635]  mount_bdev+0x2e8/0x3a0
[242178.097638]  exfat_fs_mount+0x40/0x50
[242178.097643]  mount_fs+0x138/0x2e8
[242178.097649]  vfs_kern_mount+0x90/0x270
[242178.097655]  do_mount+0x798/0x173c
[242178.097659]  ksys_mount+0x114/0x1ac
[242178.097665]  __arm64_sys_mount+0x24/0x34
[242178.097671]  el0_svc_common+0xb8/0x1b8
[242178.097676]  el0_svc_handler+0x74/0x90
[242178.097681]  el0_svc+0x8/0x340

By analyzing the exfat code,we found that continuous physical memory
is not required here,so kvmalloc_array is used can solve this problem.

Cc: stable@vger.kernel.org
Signed-off-by: gaoming <gaoming20@hihonor.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
2023-07-11 21:33:20 +09:00
Oleksij Rempel
4193b93875 ARM: dts: stm32: prtt1c: Add PoDL PSE regulator nodes
This commit introduces Power over Data Line (PoDL) Power Source
Equipment (PSE) regulator nodes to the PRTT1C devicetree. The addition
of these nodes enables support for PoDL in PRTT1C devices, allowing
power delivery and data transmission over a single twisted pair.

The new PoDL PSE regulator nodes provide voltage capability information
of the current board design, which can be used as a hint for system
administrators when configuring and managing power settings. This
update enhances the versatility and simplifies the power management of
PRTT1C devices while ensuring compatibility with connected Powered
Devices (PDs).

After applying this patch, the power delivery can be controlled from
user space with a patched [1] ethtool version using the following commands:
  ethtool --set-pse t1l2 podl-pse-admin-control enable
to enable power delivery, and
  ethtool --show-pse t1l2
to display the PoDL PSE settings.

By integrating PoDL PSE support into the PRTT1C devicetree, users can
benefit from streamlined power and data connections in their
deployments, improving overall system efficiency and reducing cabling
complexity.

[1] https://lore.kernel.org/all/20230317093024.1051999-1-o.rempel@pengutronix.de/

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2023-07-11 14:26:58 +02:00
Thomas Zimmermann
27655b9bb9 drm/client: Send hotplug event after registering a client
Generate a hotplug event after registering a client to allow the
client to configure its display. Remove the hotplug calls from the
existing clients for fbdev emulation. This change fixes a concurrency
bug between registering a client and receiving events from the DRM
core. The bug is present in the fbdev emulation of all drivers.

The fbdev emulation currently generates a hotplug event before
registering the client to the device. For each new output, the DRM
core sends an additional hotplug event to each registered client.

If the DRM core detects first output between sending the artificial
hotplug and registering the device, the output's hotplug event gets
lost. If this is the first output, the fbdev console display remains
dark. This has been observed with amdgpu and fbdev-generic.

Fix this by adding hotplug generation directly to the client's
register helper drm_client_register(). Registering the client and
receiving events are serialized by struct drm_device.clientlist_mutex.
So an output is either configured by the initial hotplug event, or
the client has already been registered.

The bug was originally added in commit 6e3f17ee73 ("drm/fb-helper:
generic: Call drm_client_add() after setup is done"), in which adding
a client and receiving a hotplug event switched order. It was hidden,
as most hardware and drivers have at least on static output configured.
Other drivers didn't use the internal DRM client or still had struct
drm_mode_config_funcs.output_poll_changed set. That callback handled
hotplug events as well. After not setting the callback in amdgpu in
commit 0e3172bac3 ("drm/amdgpu: Don't set struct
drm_driver.output_poll_changed"), amdgpu did not show a framebuffer
console if output events got lost. The bug got copy-pasted from
fbdev-generic into the other fbdev emulation.

Reported-by: Moritz Duge <MoritzDuge@kolahilft.de>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2649
Fixes: 6e3f17ee73 ("drm/fb-helper: generic: Call drm_client_add() after setup is done")
Fixes: 8ab59da26b ("drm/fb-helper: Move generic fbdev emulation into separate source file")
Fixes: b79fe9abd5 ("drm/fbdev-dma: Implement fbdev emulation for GEM DMA helpers")
Fixes: 63c381552f ("drm/armada: Implement fbdev emulation as in-kernel client")
Fixes: 49953b70e7 ("drm/exynos: Implement fbdev emulation as in-kernel client")
Fixes: 8f1aaccb04 ("drm/gma500: Implement client-based fbdev emulation")
Fixes: 940b869c2f ("drm/msm: Implement fbdev emulation as in-kernel client")
Fixes: 9e69bcd88e ("drm/omapdrm: Implement fbdev emulation as in-kernel client")
Fixes: e317a69fe8 ("drm/radeon: Implement client-based fbdev emulation")
Fixes: 71ec16f45e ("drm/tegra: Implement fbdev emulation as in-kernel client")
Fixes: 0e3172bac3 ("drm/amdgpu: Don't set struct drm_driver.output_poll_changed")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Moritz Duge <MoritzDuge@kolahilft.de>
Tested-by: Torsten Krah <krah.tm@gmail.com>
Tested-by: Paul Schyska <pschyska@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@gmail.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Mikko Perttunen <mperttunen@nvidia.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Cc: linux-tegra@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.2+
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # msm
Link: https://patchwork.freedesktop.org/patch/msgid/20230710091029.27503-1-tzimmermann@suse.de
2023-07-11 14:02:01 +02:00
Thomas Zimmermann
f1b215fdcd fbdev/hyperv_fb: Include <linux/screen_info.h>
Include <linux/screen_info.h> to get the global screen_info state.
Fixes the following errors:

>> drivers/video/fbdev/hyperv_fb.c:1033:10: error: use of undeclared identifier 'screen_info'
    1033 |                 base = screen_info.lfb_base;
         |                        ^
   drivers/video/fbdev/hyperv_fb.c:1034:10: error: use of undeclared identifier 'screen_info'
    1034 |                 size = screen_info.lfb_size;
	 |                        ^
>> drivers/video/fbdev/hyperv_fb.c:1080:3: error: must use 'struct' tag to refer to type 'screen_info'
    1080 |                 screen_info.lfb_size = 0;
	 |                 ^
	 |                 struct
>> drivers/video/fbdev/hyperv_fb.c:1080:14: error: expected identifier or '('
    1080 |                 screen_info.lfb_size = 0;
	 |                            ^
   drivers/video/fbdev/hyperv_fb.c:1081:3: error: must use 'struct' tag to refer to type 'screen_info'
    1081 |                 screen_info.lfb_base = 0;
	 |                 ^
	 |                 struct
   drivers/video/fbdev/hyperv_fb.c:1081:14: error: expected identifier or '('
    1081 |                 screen_info.lfb_base = 0;
	 |                            ^
   drivers/video/fbdev/hyperv_fb.c:1082:3: error: must use 'struct' tag to refer to type 'screen_info'
    1082 |                 screen_info.orig_video_isVGA = 0;
	 |                 ^
	 |                 struct
    drivers/video/fbdev/hyperv_fb.c:1082:14: error: expected identifier or '('
    1082 |                 screen_info.orig_video_isVGA = 0;
	 |                            ^
    8 errors generated.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202307101042.rqehuauj-lkp@intel.com/
Fixes: 8b0d13545b ("efi: Do not include <linux/screen_info.h> from EFI header")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: "K. Y. Srinivasan" <kys@microsoft.com> (supporter:Hyper-V/Azure CORE AND DRIVERS)
Cc: Haiyang Zhang <haiyangz@microsoft.com> (supporter:Hyper-V/Azure CORE AND DRIVERS)
Cc: Wei Liu <wei.liu@kernel.org> (supporter:Hyper-V/Azure CORE AND DRIVERS)
Cc: Dexuan Cui <decui@microsoft.com> (supporter:Hyper-V/Azure CORE AND DRIVERS)
Cc: Helge Deller <deller@gmx.de> (maintainer:FRAMEBUFFER LAYER)
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Sui Jingfeng <suijingfeng@loongson.cn>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-efi@vger.kernel.org
Cc: linux-hyperv@vger.kernel.org (open list:Hyper-V/Azure CORE AND DRIVERS)
Cc: linux-fbdev@vger.kernel.org (open list:FRAMEBUFFER LAYER)
Cc: dri-devel@lists.freedesktop.org (open list:FRAMEBUFFER LAYER)
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20230710075848.23087-1-tzimmermann@suse.de
2023-07-11 13:58:02 +02:00
Suman Ghosh
8278ee2a26 octeontx2-pf: Add additional check for MCAM rules
Due to hardware limitation, MCAM drop rule with
ether_type == 802.1Q and vlan_id == 0 is not supported. Hence rejecting
such rules.

Fixes: dce677da57 ("octeontx2-pf: Add vlan-etype to ntuple filters")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Link: https://lore.kernel.org/r/20230710103027.2244139-1-sumang@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-11 12:56:57 +02:00
Dario Binacchi
f021544006 ARM: dts: stm32: add touchscreen on stm32f746-disco board
The patch adds support for touchscreen on the stm32f746-disco board.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2023-07-11 12:54:26 +02:00
Dario Binacchi
0637e66f82 ARM: dts: stm32: add pin map for i2c3 controller on stm32f7
Add pin configurations for using i2c3 controller on stm32f7.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2023-07-11 12:47:58 +02:00
Dario Binacchi
df362914ee ARM: dts: stm32: re-add CAN support on stm32f746
The revert commit 36a6418bb1 ("Revert "ARM: dts: stm32: add CAN support
on stm32f746"") prevented parsing errors due to the lack of CAN3 binding.

Now that the binding definition for CAN3 is available in the mainline
thanks to commit 8f3ef556f8 ("dt-bindings: mfd: stm32f7: Add binding
definition for CAN3"), we can re-add the CAN support and make the driver
usable again.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2023-07-11 12:46:39 +02:00
Andy Shevchenko
b8e39b3848 netlink: Make use of __assign_bit() API
We have for some time the __assign_bit() API to replace open coded

	if (foo)
		__set_bit(n, bar);
	else
		__clear_bit(n, bar);

Use this API in the code. No functional change intended.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Message-ID: <20230710100830.89936-2-andriy.shevchenko@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-11 12:23:15 +02:00
Andy Shevchenko
274c4a6d52 net/core: Make use of assign_bit() API
We have for some time the assign_bit() API to replace open coded

	if (foo)
		set_bit(n, bar);
	else
		clear_bit(n, bar);

Use this API in the code. No functional change intended.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Message-ID: <20230710100830.89936-1-andriy.shevchenko@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-11 12:23:15 +02:00
Thomas GENTY
6b293a8c91 platform/x86: touchscreen_dmi: Add info for the Archos 101 Cesium Educ tablet
Add info for the Archos 101 Cesium Educ tablet
It was tested using gslx680_ts_acpi module
PR at https://github.com/onitake/gsl-firmware/pull/210 for the firmware

Signed-off-by: Thomas GENTY <tomlohave@gmail.com>
Link: https://lore.kernel.org/r/20230707141425.21473-1-tomlohave@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-07-11 12:15:30 +02:00
Armin Wolf
d0050c2ef5 platform/x86: dell-ddv: Fix mangled list in documentation
Add missing empty line necessary for sphinx to recognize
the list. Also reword the first entry a little bit.

Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20230707010333.12954-2-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-07-11 12:15:30 +02:00
Armin Wolf
8c48938375 platform/x86: dell-ddv: Improve error handling
If for some reason a external function returns -ENODEV,
no error message is being displayed because the driver
assumes that -ENODEV can only be returned internally if
no sensors, etc where found.
Fix this by explicitly returning 0 in such a case since
missing hardware is no error. Also remove the now obsolete
check for -ENODEV.

Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20230707010333.12954-1-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-07-11 12:15:30 +02:00
Shyam Sundar S K
5d3acd9d7a platform/x86/amd: pmf: Add new ACPI ID AMDI0103
Add new ACPI ID AMDI0103 used by upcoming AMD platform to the PMF
supported list of devices.

Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20230711100903.384151-1-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-07-11 12:15:24 +02:00
Shyam Sundar S K
822507ca6a platform/x86/amd: pmc: Add new ACPI ID AMDI000A
Add new ACPI ID AMDI000A used by upcoming AMD platform to the pmc
supported list of devices

Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20230711100344.383948-1-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-07-11 12:15:20 +02:00
Simon Ser
a811c2e42a i915/display/hotplug: use drm_kms_helper_connector_hotplug_event()
This adds more information to the hotplug uevent and lets user-space
know that it's about a particular connector only.

v2: don't rely on the changed HPD pin bitmask to count changed
    connectors (Jani)

Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230623094229.120264-1-contact@emersion.fr
2023-07-11 12:48:40 +03:00
Wen Yang
758b492047 eventfd: prevent underflow for eventfd semaphores
For eventfd with flag EFD_SEMAPHORE, when its ctx->count is 0, calling
eventfd_ctx_do_read will cause ctx->count to overflow to ULLONG_MAX.

An underflow can happen with EFD_SEMAPHORE eventfds in at least the
following three subsystems:

(1) virt/kvm/eventfd.c
(2) drivers/vfio/virqfd.c
(3) drivers/virt/acrn/irqfd.c

where (2) and (3) are just modeled after (1). An eventfd must be
specified for use with the KVM_IRQFD ioctl(). This can also be an
EFD_SEMAPHORE eventfd. When the eventfd count is zero or has been
decremented to zero an underflow can be triggered when the irqfd is shut
down by raising the KVM_IRQFD_FLAG_DEASSIGN flag in the KVM_IRQFD
ioctl():

        // ctx->count == 0
        kvm_vm_ioctl()
        -> kvm_irqfd()
           -> kvm_irqfd_deassign()
              -> irqfd_deactivate()
                 -> irqfd_shutdown()
                    -> eventfd_ctx_remove_wait_queue(&cnt)
                       -> eventfd_ctx_do_read(&cnt)

Userspace polling on the eventfd wouldn't notice the underflow because 1
is always returned as the value from eventfd_read() while ctx->count
would've underflowed. It's not a huge deal because this should only be
happening when the irqfd is shutdown but we should still fix it and
avoid the spurious wakeup.

Fixes: cb289d6244 ("eventfd - allow atomic read and waitqueue remove")
Signed-off-by: Wen Yang <wenyang.linux@foxmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dylan Yudaken <dylany@fb.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Message-Id: <tencent_7588DFD1F365950A757310D764517A14B306@qq.com>
[brauner: rewrite commit message and add explanation how this underflow can happen]
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-07-11 11:41:34 +02:00
Dmitry Rokosov
6e2acbfe59 clk: meson: change usleep_range() to udelay() for atomic context
The function meson_clk_pll_enable() can be invoked under the enable_lock
spinlock from the clk core logic, which risks a kernel panic during the
usleep_range() call:

   BUG: scheduling while atomic: kworker/u4:2/36/0x00000002
   Modules linked in: g_ffs usb_f_fs libcomposite
   CPU: 1 PID: 36 Comm: kworker/u4:2 Not tainted 6.4.0-rc5 #273
   Workqueue: events_unbound async_run_entry_fn
   Call trace:
    dump_backtrace+0x9c/0x128
    show_stack+0x20/0x38
    dump_stack_lvl+0x48/0x60
    dump_stack+0x18/0x28
    __schedule_bug+0x58/0x78
    __schedule+0x828/0xa88
    schedule+0x64/0xd8
    schedule_hrtimeout_range_clock+0xd0/0x208
    schedule_hrtimeout_range+0x1c/0x30
    usleep_range_state+0x6c/0xa8
    meson_clk_pll_enable+0x1f4/0x310
    clk_core_enable+0x78/0x200
    clk_core_enable+0x58/0x200
    clk_core_enable+0x58/0x200
    clk_core_enable+0x58/0x200
    clk_enable+0x34/0x60

So it is required to use the udelay() function instead of usleep_range()
for the atomic context safety.

Fixes: b6ec400aa1 ("clk: meson: introduce new pll power-on sequence for A1 SoC family")
Reported-by: Jan Dakinevich <yvdakinevich@sberdevices.ru>
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Link: https://lore.kernel.org/r/20230704215404.11533-1-ddrokosov@sberdevices.ru
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2023-07-11 11:35:42 +02:00
Mario Limonciello
d194803325 platform/x86/amd: pmc: Apply nvme quirk to HP 15s-eq2xxx
HP 15s-eq2xxx is an older Lucienne laptop that has a problem resuming
from s2idle when IOMMU is enabled.  The symptoms very closely resemble
that of the Lenovo issues with NVME resume. Lucienne was released in
a similar timeframe as the Renoir / Cezanne Lenovo laptops and they
may have similar BIOS code.

Applying the same quirk to this system allows the system to work with
IOMMU enabled and s2idle resume to work.

Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2684
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230710183934.17315-3-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-07-11 11:34:14 +02:00
Mario Limonciello
e8ef8dd28c platform/x86: Move s2idle quirk from thinkpad-acpi to amd-pmc
It turns out that some-non Lenovo systems can benefit from the quirk
introduced for Lenovo systems in commit 455cd867b8 ("platform/x86:
thinkpad_acpi: Add a s2idle resume quirk for a number of laptops").

So move this quirk into running from the amd-pmc driver instead.
No intended functional changes.

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230710183934.17315-2-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-07-11 11:34:14 +02:00
Zhengchao Shao
6018a26627 ip_vti: fix potential slab-use-after-free in decode_session6
When ip_vti device is set to the qdisc of the sfb type, the cb field
of the sent skb may be modified during enqueuing. Then,
slab-use-after-free may occur when ip_vti device sends IPv6 packets.
As commit f855691975 ("xfrm6: Fix the nexthdr offset in
_decode_session6.") showed, xfrm_decode_session was originally intended
only for the receive path. IP6CB(skb)->nhoff is not set during
transmission. Therefore, set the cb field in the skb to 0 before
sending packets.

Fixes: f855691975 ("xfrm6: Fix the nexthdr offset in _decode_session6.")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2023-07-11 11:06:08 +02:00
Zhengchao Shao
9fd41f1ba6 ip6_vti: fix slab-use-after-free in decode_session6
When ipv6_vti device is set to the qdisc of the sfb type, the cb field
of the sent skb may be modified during enqueuing. Then,
slab-use-after-free may occur when ipv6_vti device sends IPv6 packets.

The stack information is as follows:
BUG: KASAN: slab-use-after-free in decode_session6+0x103f/0x1890
Read of size 1 at addr ffff88802e08edc2 by task swapper/0/0
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.4.0-next-20230707-00001-g84e2cad7f979 #410
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl+0xd9/0x150
print_address_description.constprop.0+0x2c/0x3c0
kasan_report+0x11d/0x130
decode_session6+0x103f/0x1890
__xfrm_decode_session+0x54/0xb0
vti6_tnl_xmit+0x3e6/0x1ee0
dev_hard_start_xmit+0x187/0x700
sch_direct_xmit+0x1a3/0xc30
__qdisc_run+0x510/0x17a0
__dev_queue_xmit+0x2215/0x3b10
neigh_connected_output+0x3c2/0x550
ip6_finish_output2+0x55a/0x1550
ip6_finish_output+0x6b9/0x1270
ip6_output+0x1f1/0x540
ndisc_send_skb+0xa63/0x1890
ndisc_send_rs+0x132/0x6f0
addrconf_rs_timer+0x3f1/0x870
call_timer_fn+0x1a0/0x580
expire_timers+0x29b/0x4b0
run_timer_softirq+0x326/0x910
__do_softirq+0x1d4/0x905
irq_exit_rcu+0xb7/0x120
sysvec_apic_timer_interrupt+0x97/0xc0
</IRQ>
Allocated by task 9176:
kasan_save_stack+0x22/0x40
kasan_set_track+0x25/0x30
__kasan_slab_alloc+0x7f/0x90
kmem_cache_alloc_node+0x1cd/0x410
kmalloc_reserve+0x165/0x270
__alloc_skb+0x129/0x330
netlink_sendmsg+0x9b1/0xe30
sock_sendmsg+0xde/0x190
____sys_sendmsg+0x739/0x920
___sys_sendmsg+0x110/0x1b0
__sys_sendmsg+0xf7/0x1c0
do_syscall_64+0x39/0xb0
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Freed by task 9176:
kasan_save_stack+0x22/0x40
kasan_set_track+0x25/0x30
kasan_save_free_info+0x2b/0x40
____kasan_slab_free+0x160/0x1c0
slab_free_freelist_hook+0x11b/0x220
kmem_cache_free+0xf0/0x490
skb_free_head+0x17f/0x1b0
skb_release_data+0x59c/0x850
consume_skb+0xd2/0x170
netlink_unicast+0x54f/0x7f0
netlink_sendmsg+0x926/0xe30
sock_sendmsg+0xde/0x190
____sys_sendmsg+0x739/0x920
___sys_sendmsg+0x110/0x1b0
__sys_sendmsg+0xf7/0x1c0
do_syscall_64+0x39/0xb0
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The buggy address belongs to the object at ffff88802e08ed00
which belongs to the cache skbuff_small_head of size 640
The buggy address is located 194 bytes inside of
freed 640-byte region [ffff88802e08ed00, ffff88802e08ef80)

As commit f855691975 ("xfrm6: Fix the nexthdr offset in
_decode_session6.") showed, xfrm_decode_session was originally intended
only for the receive path. IP6CB(skb)->nhoff is not set during
transmission. Therefore, set the cb field in the skb to 0 before
sending packets.

Fixes: f855691975 ("xfrm6: Fix the nexthdr offset in _decode_session6.")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2023-07-11 11:06:08 +02:00
Zhengchao Shao
53223f2ed1 xfrm: fix slab-use-after-free in decode_session6
When the xfrm device is set to the qdisc of the sfb type, the cb field
of the sent skb may be modified during enqueuing. Then,
slab-use-after-free may occur when the xfrm device sends IPv6 packets.

The stack information is as follows:
BUG: KASAN: slab-use-after-free in decode_session6+0x103f/0x1890
Read of size 1 at addr ffff8881111458ef by task swapper/3/0
CPU: 3 PID: 0 Comm: swapper/3 Not tainted 6.4.0-next-20230707 #409
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl+0xd9/0x150
print_address_description.constprop.0+0x2c/0x3c0
kasan_report+0x11d/0x130
decode_session6+0x103f/0x1890
__xfrm_decode_session+0x54/0xb0
xfrmi_xmit+0x173/0x1ca0
dev_hard_start_xmit+0x187/0x700
sch_direct_xmit+0x1a3/0xc30
__qdisc_run+0x510/0x17a0
__dev_queue_xmit+0x2215/0x3b10
neigh_connected_output+0x3c2/0x550
ip6_finish_output2+0x55a/0x1550
ip6_finish_output+0x6b9/0x1270
ip6_output+0x1f1/0x540
ndisc_send_skb+0xa63/0x1890
ndisc_send_rs+0x132/0x6f0
addrconf_rs_timer+0x3f1/0x870
call_timer_fn+0x1a0/0x580
expire_timers+0x29b/0x4b0
run_timer_softirq+0x326/0x910
__do_softirq+0x1d4/0x905
irq_exit_rcu+0xb7/0x120
sysvec_apic_timer_interrupt+0x97/0xc0
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1a/0x20
RIP: 0010:intel_idle_hlt+0x23/0x30
Code: 1f 84 00 00 00 00 00 f3 0f 1e fa 41 54 41 89 d4 0f 1f 44 00 00 66 90 0f 1f 44 00 00 0f 00 2d c4 9f ab 00 0f 1f 44 00 00 fb f4 <fa> 44 89 e0 41 5c c3 66 0f 1f 44 00 00 f3 0f 1e fa 41 54 41 89 d4
RSP: 0018:ffffc90000197d78 EFLAGS: 00000246
RAX: 00000000000a83c3 RBX: ffffe8ffffd09c50 RCX: ffffffff8a22d8e5
RDX: 0000000000000001 RSI: ffffffff8d3f8080 RDI: ffffe8ffffd09c50
RBP: ffffffff8d3f8080 R08: 0000000000000001 R09: ffffed1026ba6d9d
R10: ffff888135d36ceb R11: 0000000000000001 R12: 0000000000000001
R13: ffffffff8d3f8100 R14: 0000000000000001 R15: 0000000000000000
cpuidle_enter_state+0xd3/0x6f0
cpuidle_enter+0x4e/0xa0
do_idle+0x2fe/0x3c0
cpu_startup_entry+0x18/0x20
start_secondary+0x200/0x290
secondary_startup_64_no_verify+0x167/0x16b
</TASK>
Allocated by task 939:
kasan_save_stack+0x22/0x40
kasan_set_track+0x25/0x30
__kasan_slab_alloc+0x7f/0x90
kmem_cache_alloc_node+0x1cd/0x410
kmalloc_reserve+0x165/0x270
__alloc_skb+0x129/0x330
inet6_ifa_notify+0x118/0x230
__ipv6_ifa_notify+0x177/0xbe0
addrconf_dad_completed+0x133/0xe00
addrconf_dad_work+0x764/0x1390
process_one_work+0xa32/0x16f0
worker_thread+0x67d/0x10c0
kthread+0x344/0x440
ret_from_fork+0x1f/0x30
The buggy address belongs to the object at ffff888111145800
which belongs to the cache skbuff_small_head of size 640
The buggy address is located 239 bytes inside of
freed 640-byte region [ffff888111145800, ffff888111145a80)

As commit f855691975 ("xfrm6: Fix the nexthdr offset in
_decode_session6.") showed, xfrm_decode_session was originally intended
only for the receive path. IP6CB(skb)->nhoff is not set during
transmission. Therefore, set the cb field in the skb to 0 before
sending packets.

Fixes: f855691975 ("xfrm6: Fix the nexthdr offset in _decode_session6.")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2023-07-11 11:06:08 +02:00
Marek Vasut
5408d51846 ARM: dts: stm32: Deduplicate DSI node on stm32mp15
All boards using the DSI node duplicate the same pattern common pattern
in board DTs, that pattern is ports with endpoint labels and the same
in-SoC regulator connection. Move that common pattern into stm32mp157.dtsi
instead.

The two boards which do define panel@0 directly in the DSI bridge node now
have #address-cells/#size-cells in their board DT instead of it being in
stm32mp157.dtsi and activated incorrectly for all boards, even the ones
which use e.g. another DSI-to-something bridge.

Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Raphaël Gallais-Pou <raphael.gallais-pou@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2023-07-11 10:58:23 +02:00
Lu Hongfei
04499f28b4 net: dsa: Removed unneeded of_node_put in felix_parse_ports_node
Remove unnecessary of_node_put from the continue path to prevent
child node from being released twice, which could avoid resource
leak or other unexpected issues.

Signed-off-by: Lu Hongfei <luhongfei@vivo.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Fixes: de879a016a ("net: dsa: felix: add functionality when not all ports are supported")
Link: https://lore.kernel.org/r/20230710031859.36784-1-luhongfei@vivo.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-11 10:53:14 +02:00
Oliver Upton
5346f7e13e KVM: arm64: Always return generic v8 as the preferred target
Userspace selecting an implementation-specific vCPU target has been
completely useless for a very long time. Let's go whole hog and start
returning the generic v8 target across all implementations as the
preferred target.

Uphold the pre-existing behavior by tolerating either the generic target
or an implementation-specific target if the vCPU happens to be running
on one of the lucky few parts.

Acked-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230710193140.1706399-5-oliver.upton@linux.dev
2023-07-11 09:40:52 +01:00
Oliver Upton
ef98406036 KVM: arm64: Replace vCPU target with a configuration flag
The value of kvm_vcpu_arch::target has been used to determine if a vCPU
has actually been initialized. Storing this as an integer is needless at
this point, as KVM doesn't do any microarch-specific emulation in the
first place. Instead, all we care about is whether or not the vCPU has
been initialized.

Delete the field in favor of a vCPU configuration flag indicating if
KVM_ARM_VCPU_INIT has completed for the vCPU.

Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230710193140.1706399-4-oliver.upton@linux.dev
2023-07-11 09:40:52 +01:00
Oliver Upton
c8a67729b8 KVM: arm64: Remove pointless check for changed init target
At any time there is only a single valid value for KVM_ARM_VCPU_INIT,
depending on the current CPU implementation. In all likelihood, this
will be the generic ARMv8 target.

Drop the pointless check for a changed target value between calls to
KVM_ARM_VCPU_INIT and instead rely on the check against
kvm_target_cpu().

Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230710193140.1706399-3-oliver.upton@linux.dev
2023-07-11 09:40:52 +01:00
Oliver Upton
ea55d5a2cf KVM: arm64: Delete pointless switch statement in kvm_reset_vcpu()
The vCPU target hasn't mattered for quite a long time now. Delete the
useless switch statement in kvm_reset_vcpu(), which hilariously only had
a default case in it.

Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230710193140.1706399-2-oliver.upton@linux.dev
2023-07-11 09:40:52 +01:00
Tvrtko Ursulin
113899c266 drm/i915: Fix one wrong caching mode enum usage
Commit a4d86249c7 ("drm/i915/gt: Provide a utility to create a scratch
buffer") mistakenly passed in uapi I915_CACHING_CACHED as argument to
i915_gem_object_set_cache_coherency(), which actually takes internal
enum i915_cache_level.

No functional issue since the value matches I915_CACHE_LLC (1 == 1), which
is the intended caching mode, but lets clean it up nevertheless.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: a4d86249c7 ("drm/i915/gt: Provide a utility to create a scratch buffer")
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230707125503.3965817-1-tvrtko.ursulin@linux.intel.com
(cherry picked from commit 49c60b2f08)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2023-07-11 09:21:32 +01:00
Tvrtko Ursulin
6bf0961a00 drm/i915: Remove dead code from gen8_pte_encode
Commit 9275277d53 ("drm/i915: use pat_index instead of cache_level")
added a dedicated gen12_pte_encode but forgot to remove the Gen12 specific
bit from gen8_pte_encode.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 9275277d53 ("drm/i915: use pat_index instead of cache_level")
Cc: Fei Yang <fei.yang@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Fei Yang <fei.yang@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230707124644.3965281-1-tvrtko.ursulin@linux.intel.com
(cherry picked from commit 08509377dd)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2023-07-11 09:21:28 +01:00
Umesh Nerlige Ramappa
dde4c3d477 drm/i915/perf: Consider OA buffer boundary when zeroing out reports
For reports that are not powers of 2, reports at the end of the OA
buffer may get split across the buffer boundary. When zeroing out such
reports, take the split into consideration.

v2: Use OA_BUFFER_SIZE (Ashutosh)

Fixes: 09a36015d9 ("drm/i915/perf: Clear out entire reports after reading if not power of 2 size")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230616173402.699776-1-umesh.nerlige.ramappa@intel.com
(cherry picked from commit 40b1588a75)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2023-07-11 09:21:25 +01:00
Stanislav Lisovskiy
5c413188c6 drm/i915: Don't preserve dpll_hw_state for slave crtc in Bigjoiner
If we are using Bigjoiner dpll_hw_state is supposed to be exactly
same as for master crtc, so no need to save it's state for slave crtc.

Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Fixes: 0ff0e219d9 ("drm/i915: Compute clocks earlier")
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230628141017.18937-1-stanislav.lisovskiy@intel.com
(cherry picked from commit cbaf758809)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2023-07-11 09:21:21 +01:00
Ingo Molnar
535d0ae391 x86/cfi: Only define poison_cfi() if CONFIG_X86_KERNEL_IBT=y
poison_cfi() was introduced in:

  9831c6253a ("x86/cfi: Extend ENDBR sealing to kCFI")

... but it's only ever used under CONFIG_X86_KERNEL_IBT=y,
and if that option is disabled, we get:

  arch/x86/kernel/alternative.c:1243:13: error: ‘poison_cfi’ defined but not used [-Werror=unused-function]

Guard the definition with CONFIG_X86_KERNEL_IBT.

Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2023-07-11 10:17:55 +02:00
Etienne Carriere
5060e27012 ARM: dts: stm32: leverage OP-TEE ASync notif on STM32MP13x Soc family
Enables use of GIC PPI#15 for OP-TEE asynchronous notifications
on stm32mp13 platforms.

Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2023-07-11 10:06:21 +02:00
Lorenzo Pieralisi
6fe5c68ee6 irqchip/gic-v3: Workaround for GIC-700 erratum 2941627
GIC700 erratum 2941627 may cause GIC-700 missing SPIs wake
requests when SPIs are deactivated while targeting a
sleeping CPU - ie a CPU for which the redistributor:

GICR_WAKER.ProcessorSleep == 1

This runtime situation can happen if an SPI that has been
activated on a core is retargeted to a different core, it
becomes pending and the target core subsequently enters a
power state quiescing the respective redistributor.

When this situation is hit, the de-activation carried out
on the core that activated the SPI (through either ICC_EOIR1_EL1
or ICC_DIR_EL1 register writes) does not trigger a wake
requests for the sleeping GIC redistributor even if the SPI
is pending.

Work around the erratum by de-activating the SPI using the
redistributor GICD_ICACTIVER register if the runtime
conditions require it (ie the IRQ was retargeted between
activation and de-activation).

Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230704155034.148262-1-lpieralisi@kernel.org
2023-07-11 09:04:31 +01:00
Paolo Abeni
c0dbbdf56f Merge branch 'net-fec-fix-some-issues-of-ndo_xdp_xmit'
Wei Fang says:

====================
net: fec: fix some issues of ndo_xdp_xmit()

We encountered some issues when testing the ndo_xdp_xmit() interface
of the fec driver on i.MX8MP and i.MX93 platforms. These issues are
easy to reproduce, and the specific reproduction steps are as follows.

step1: The ethernet port of a board (board A) is connected to the EQOS
port of i.MX8MP/i.MX93, and the FEC port of i.MX8MP/i.MX93 is connected
to another ethernet port, such as a switch port.

step2: Board A uses the pktgen_sample03_burst_single_flow.sh to generate
and send packets to i.MX8MP/i.MX93. The command is shown below.
./pktgen_sample03_burst_single_flow.sh -i eth0 -d 192.168.6.8 -m \
56:bf:0d:68:b0:9e -s 1500

step3: i.MX8MP/i.MX93 use the xdp_redirect bfp program to redirect the
XDP frames from EQOS port to FEC port. The command is shown below.
./xdp_redirect eth1 eth0

After a few moments, the warning or error logs will be printed in the
console, for more details, please refer to the commit message of each
patch.
====================

Link: https://lore.kernel.org/r/20230706081012.2278063-1-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-11 10:00:52 +02:00
Wei Fang
84a1094719 net: fec: use netdev_err_once() instead of netdev_err()
In the case of heavy XDP traffic to be transmitted, the console
will print the error log continuously if there are lack of enough
BDs to accommodate the frames. The log looks like below.

[  160.013112] fec 30be0000.ethernet eth0: NOT enough BD for SG!
[  160.023116] fec 30be0000.ethernet eth0: NOT enough BD for SG!
[  160.028926] fec 30be0000.ethernet eth0: NOT enough BD for SG!
[  160.038946] fec 30be0000.ethernet eth0: NOT enough BD for SG!
[  160.044758] fec 30be0000.ethernet eth0: NOT enough BD for SG!

Not only will this log be replicated and redundant, it will also
degrade XDP performance. So we use netdev_err_once() instead of
netdev_err() now.

Fixes: 6d6b39f180 ("net: fec: add initial XDP support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-11 10:00:49 +02:00
Wei Fang
56b3c6ba53 net: fec: increase the size of tx ring and update tx_wake_threshold
When the XDP feature is enabled and with heavy XDP frames to be
transmitted, there is a considerable probability that available
tx BDs are insufficient. This will lead to some XDP frames to be
discarded and the "NOT enough BD for SG!" error log will appear
in the console (as shown below).

[  160.013112] fec 30be0000.ethernet eth0: NOT enough BD for SG!
[  160.023116] fec 30be0000.ethernet eth0: NOT enough BD for SG!
[  160.028926] fec 30be0000.ethernet eth0: NOT enough BD for SG!
[  160.038946] fec 30be0000.ethernet eth0: NOT enough BD for SG!
[  160.044758] fec 30be0000.ethernet eth0: NOT enough BD for SG!

In the case of heavy XDP traffic, sometimes the speed of recycling
tx BDs may be slower than the speed of sending XDP frames. There
may be several specific reasons, such as the interrupt is not
responsed in time, the efficiency of the NAPI callback function is
too low due to all the queues (tx queues and rx queues) share the
same NAPI, and so on.

After trying various methods, I think that increase the size of tx
BD ring is simple and effective. Maybe the best resolution is that
allocate NAPI for each queue to improve the efficiency of the NAPI
callback, but this change is a bit big and I didn't try this method.
Perheps this method will be implemented in a future patch.

This patch also updates the tx_wake_threshold of tx ring which is
related to the size of tx ring in the previous logic. Otherwise,
the tx_wake_threshold will be too high (403 BDs), which is more
likely to impact the slow path in the case of heavy XDP traffic,
because XDP path and slow path share the tx BD rings. According
to Jakub's suggestion, the tx_wake_threshold is at least equal to
tx_stop_threshold + 2 * MAX_SKB_FRAGS, if a queue of hundreds of
entries is overflowing, we should be able to apply a hysteresis
of a few tens of entries.

Fixes: 6d6b39f180 ("net: fec: add initial XDP support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-11 10:00:49 +02:00
Wei Fang
20f7973990 net: fec: recycle pages for transmitted XDP frames
Once the XDP frames have been successfully transmitted through the
ndo_xdp_xmit() interface, it's the driver responsibility to free
the frames so that the page_pool can recycle the pages and reuse
them. However, this action is not implemented in the fec driver.
This leads to a user-visible problem that the console will print
the following warning log.

[  157.568851] page_pool_release_retry() stalled pool shutdown 1389 inflight 60 sec
[  217.983446] page_pool_release_retry() stalled pool shutdown 1389 inflight 120 sec
[  278.399006] page_pool_release_retry() stalled pool shutdown 1389 inflight 181 sec
[  338.812885] page_pool_release_retry() stalled pool shutdown 1389 inflight 241 sec
[  399.226946] page_pool_release_retry() stalled pool shutdown 1389 inflight 302 sec

Therefore, to solve this issue, we free XDP frames via xdp_return_frame()
while cleaning the tx BD ring.

Fixes: 6d6b39f180 ("net: fec: add initial XDP support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-11 10:00:49 +02:00