Extent freeing neeeds to be able to avoid a busy extent deadlock
when the transaction itself holds the only busy extents in the
allocation group. This may occur if we have an EFI that contains
multiple extents to be freed, and the freeing the second intent
requires the space the first extent free released to expand the
AGFL. If we block on the busy extent at this point, we deadlock.
We hold a dirty transaction that contains a entire atomic extent
free operations within it, so if we can abort the extent free
operation and commit the progress that we've made, the busy extent
can be resolved by a log force. Hence we can restart the aborted
extent free with a new transaction and continue to make
progress without risking deadlocks.
To enable this, we need the EFI processing code to be able to handle
an -EAGAIN error to tell it to commit the current transaction and
retry again. This mechanism is already built into the defer ops
processing (used bythe refcount btree modification intents), so
there's relatively little handling we need to add to the EFI code to
enable this.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
To avoid blocking in xfs_extent_busy_flush() when freeing extents
and the only busy extents are held by the current transaction, we
need to pass the XFS_ALLOC_FLAG_FREEING flag context all the way
into xfs_extent_busy_flush().
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Btrees that aren't freespace management trees use the normal extent
allocation and freeing routines for their blocks. Hence when a btree
block is freed, a direct call to xfs_free_extent() is made and the
extent is immediately freed. This puts the entire free space
management btrees under this path, so we are stacking btrees on
btrees in the call stack. The inobt, finobt and refcount btrees
all do this.
However, the bmap btree does not do this - it calls
xfs_free_extent_later() to defer the extent free operation via an
XEFI and hence it gets processed in deferred operation processing
during the commit of the primary transaction (i.e. via intent
chaining).
We need to change xfs_free_extent() to behave in a non-blocking
manner so that we can avoid deadlocks with busy extents near ENOSPC
in transactions that free multiple extents. Inserting or removing a
record from a btree can cause a multi-level tree merge operation and
that will free multiple blocks from the btree in a single
transaction. i.e. we can call xfs_free_extent() multiple times, and
hence the btree manipulation transaction is vulnerable to this busy
extent deadlock vector.
To fix this, convert all the remaining callers of xfs_free_extent()
to use xfs_free_extent_later() to queue XEFIs and hence defer
processing of the extent frees to a context that can be safely
restarted if a deadlock condition is detected.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
XFS has strict metadata ordering requirements. One of the things it
does is maintain the commit order of items from transaction commit
through the CIL and into the AIL. That is, if a transaction logs
item A before item B in a modification, then they will be inserted
into the CIL in the order {A, B}. These items are then written into
the iclog during checkpointing in the order {A, B}. When the
checkpoint commits, they are supposed to be inserted into the AIL in
the order {A, B}, and when they are pushed from the AIL, they are
pushed in the order {A, B}.
If we crash, log recovery then replays the two items from the
checkpoint in the order {A, B}, resulting in the objects the items
apply to being queued for writeback at the end of the checkpoint
in the order {A, B}. This means recovery behaves the same way as the
runtime code.
In places, we have subtle dependencies on this ordering being
maintained. One of this place is performing intent recovery from the
log. It assumes that recovering an intent will result in a
non-intent object being the first thing that is modified in the
recovery transaction, and so when the transaction commits and the
journal flushes, the first object inserted into the AIL beyond the
intent recovery range will be a non-intent item. It uses the
transistion from intent items to non-intent items to stop the
recovery pass.
A recent log recovery issue indicated that an intent was appearing
as the first item in the AIL beyond the recovery range, hence
breaking the end of recovery detection that exists.
Tracing indicated insertion of the items into the AIL was apparently
occurring in the right order (the intent was last in the commit item
list), but the intent was appearing first in the AIL. IOWs, the
order of items in the AIL was {D,C,B,A}, not {A,B,C,D}, and bulk
insertion was reversing the order of the items in the batch of items
being inserted.
Lucky for us, all the items fed to bulk insertion have the same LSN,
so the reversal of order does not affect the log head/tail tracking
that is based on the contents of the AIL. It only impacts on code
that has implicit, subtle dependencies on object order, and AFAICT
only the intent recovery loop is impacted by it.
Make sure bulk AIL insertion does not reorder items incorrectly.
Fixes: 0e57f6a36f ("xfs: bulk AIL insertion during transaction commit")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Pointers drop_leaf and save_leaf are initialized with values that are never
read, they are being re-assigned later on just before they are used. Remove
the redundant early initializations and keep the later assignments at the
point where they are used. Cleans up two clang scan build warnings:
fs/xfs/libxfs/xfs_attr_leaf.c:2288:29: warning: Value stored to 'drop_leaf'
during its initialization is never read [deadcode.DeadStores]
fs/xfs/libxfs/xfs_attr_leaf.c:2289:29: warning: Value stored to 'save_leaf'
during its initialization is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
As Darrick prefers to micro-manage this without looking at my input
for code I wrote and then complain about getting burned out by that
I might as well drop myself from the maintainers file.
[djwong: and I don't like it when you all bikeshed a single-patch
submission to the point that new bugs are being introduced in the scope
creep that wasn't part of V1-V7!]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
The return value type of i_blocksize() is 'unsigned int', so the
type of blocksize has been modified from 'int' to 'unsigned int'
to ensure data type consistency.
Signed-off-by: Lu Hongfei <luhongfei@vivo.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
It is perfectly valid to not find session not found errors
when a reconnect of a session happens when requests for the
same session are happening in parallel.
We had these log messages as VFS logs. My last change dumped
these logs as FYI logs.
This change just creates a new dynamic tracepoint to capture
events of this type, just in case it is useful while
debugging issues in the future.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We do not log the session id in crypt_setup when a matching
session is not found. Printing the session id helps debugging
here. This change does just that.
This change also changes this log to FYI, since it is normal to
see then during a reconnect. Doing the same for a similar log
in case of signed connections.
The plan is to have a tracepoint for this event, so that we will
be able to see this event if need be. That will be done as
another change.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The kdb_kbd_cleanup_state() is called from another file through
the kdb_private.h file, but that is not included before the
definition, causing a W=1 warning:
kernel/debug/kdb/kdb_keyboard.c:198:6: error: no previous prototype for 'kdb_kbd_cleanup_state' [-Werror=missing-prototypes]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230517124802.929751-1-arnd@kernel.org
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Commit 7ae24fcee9 ("cdrom: remove the unused mode argument to
cdrom_release") was supposed to remove an unused argument from
cdrom_release(). but instead removed a used argument from
cdrom_open(). This results in the following build error.
drivers/cdrom/gdrom.c: In function 'gdrom_bdops_open':
drivers/cdrom/gdrom.c:484:15: error: too few arguments to function 'cdrom_open'
drivers/cdrom/gdrom.c: In function 'gdrom_bdops_release':
drivers/cdrom/gdrom.c:492:35: error: 'mode' undeclared
Fix it up.
Fixes: 7ae24fcee9 ("cdrom: remove the unused mode argument to cdrom_release")
Cc: Christoph Hellwig <hch@lst.de>
Cc: Phillip Potter <phil@philpotter.co.uk>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230629083047.3487172-1-linux@roeck-us.net
Signed-off-by: Jens Axboe <axboe@kernel.dk>
To save architectures from needing to wrap the call in #ifdefs, add a
stub no-op version of kgdb_nmicallback(), which returns 1 if it didn't
handle anything.
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20230601143109.v9.6.Ia3aeac89bb6751b682237e76e5ba594318e4b1aa@changeid
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
The -target option has been deprecated since clang 3.4 in 2013. Therefore, use
the preferred --target=bpf form instead. This also matches how we use --target=
in scripts/Makefile.clang.
Signed-off-by: Fangrui Song <maskray@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: 274b6f0c87
Link: https://lore.kernel.org/bpf/20230624001856.1903733-1-maskray@google.com
generate_test_data() acquires a page with alloc_page(GFP_KERNEL).
The GFP_KERNEL is typical for kernel-internal allocations. The
caller requires ZONE_NORMAL or a lower zone for direct access.
Therefore the page cannot come from ZONE_HIGHMEM. Thus there's no
need to map it with kmap().
Also, the kmap() is being deprecated in favor of kmap_local_page() [1].
Hence, use a plain page_address() directly.
Since the page passed to the page_address() is not from the highmem
zone, the page_address() function will always return a valid kernel
virtual address and will not return NULL. Hence, remove the check
'if (!ptr)'.
Remove the unused variable 'ptr' and label 'err_free_page'.
[1] https://lore.kernel.org/all/20220813220034.806698-1-ira.weiny@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Sumitra Sharma <sumitraartsy@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/bpf/20230623151644.GA434468@sumitra.com
Add new function intel_display_device_info_print() and print the display
device info there instead of intel_device_info_print(). This also fixes
the display runtime info printing to use the actual runtime info instead
of the static defaults.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/30d4f93c58839bc9312b43423cd43bc0ef655a35.1687878757.git.jani.nikula@intel.com
Instead of modifying the device info on the fly, use static const mock
device info.
It's not okay to modify device info at runtime; we've added separate
runtime info for info that needs to be modified at runtime. We've added
safeguards to device info to prevent it from being modified, but commit
5e352e32ae ("drm/i915: preparation for using PAT index") just cast the
const away and modified it anyway. This prevents device info from being
moved to rodata.
Fixes: 5e352e32ae ("drm/i915: preparation for using PAT index")
Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Fei Yang <fei.yang@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b0db62045a96a3fd4cf123685da88cc777f9b485.1687878757.git.jani.nikula@intel.com
Kmemleak reported the following leak info in try_smi_init():
unreferenced object 0xffff00018ecf9400 (size 1024):
comm "modprobe", pid 2707763, jiffies 4300851415 (age 773.308s)
backtrace:
[<000000004ca5b312>] __kmalloc+0x4b8/0x7b0
[<00000000953b1072>] try_smi_init+0x148/0x5dc [ipmi_si]
[<000000006460d325>] 0xffff800081b10148
[<0000000039206ea5>] do_one_initcall+0x64/0x2a4
[<00000000601399ce>] do_init_module+0x50/0x300
[<000000003c12ba3c>] load_module+0x7a8/0x9e0
[<00000000c246fffe>] __se_sys_init_module+0x104/0x180
[<00000000eea99093>] __arm64_sys_init_module+0x24/0x30
[<0000000021b1ef87>] el0_svc_common.constprop.0+0x94/0x250
[<0000000070f4f8b7>] do_el0_svc+0x48/0xe0
[<000000005a05337f>] el0_svc+0x24/0x3c
[<000000005eb248d6>] el0_sync_handler+0x160/0x164
[<0000000030a59039>] el0_sync+0x160/0x180
The problem was that when an error occurred before handlers registration
and after allocating `new_smi->si_sm`, the variable wouldn't be freed in
the error handling afterwards since `shutdown_smi()` hadn't been
registered yet. Fix it by adding a `kfree()` in the error handling path
in `try_smi_init()`.
Cc: stable@vger.kernel.org # 4.19+
Fixes: 7960f18a56 ("ipmi_si: Convert over to a shutdown handler")
Signed-off-by: Yi Yang <yiyang13@huawei.com>
Co-developed-by: GONG, Ruiqi <gongruiqi@huaweicloud.com>
Signed-off-by: GONG, Ruiqi <gongruiqi@huaweicloud.com>
Message-Id: <20230629123328.2402075-1-gongruiqi@huaweicloud.com>
Signed-off-by: Corey Minyard <minyard@acm.org>
For now, DIE_PAGE_FAULT, DIE_BREAK, DIE_SSTEPBP, DIE_UPROBE and
DIE_UPROBE_XOL are not used by any code, remove them.
Tested-by: Jeff Xie <xiehuan09@gmail.com>
Suggested-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
For now, we can use larch_insn_gen_break() to define KPROBE_BP_INSN and
KPROBE_SSTEPBP_INSN. Because larch_insn_gen_break() returns instruction
word, define kprobe_opcode_t as u32, then do some small changes related
with type conversion, no functional change intended.
Tested-by: Jeff Xie <xiehuan09@gmail.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
There exist various break insns such as BRK_KPROBE_BP, BRK_KPROBE_SSTEPBP,
BRK_UPROBE_BP and BRK_UPROBE_XOLBP, add larch_insn_gen_break() to generate
break insns simpler, this is preparation for later patch.
Tested-by: Jeff Xie <xiehuan09@gmail.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Like llsc instructions, the atomic memory access instructions shouldn't
be supported for probing, so check for them in insns_not_supported().
Closes: https://lore.kernel.org/all/SY4P282MB351877A70A0333C790FE85A5C09C9@SY4P282MB3518.AUSP282.PROD.OUTLOOK.COM/
Tested-by: Jeff Xie <xiehuan09@gmail.com>
Reported-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The three functions insns_not_supported(), insns_need_simulation() and
arch_simulate_insn() will be used for uprobes, move them from kprobes.c
to inst.c, this is preparation for later patch, no functionality change.
Tested-by: Jeff Xie <xiehuan09@gmail.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
This is an adaptation of commit f3a112c0c4 ("x86,rethook,kprobes:
Replace kretprobe with rethook on x86") and commit b57c2f1240 ("riscv:
add riscv rethook implementation") to LoongArch. Mainly refer to commit
b57c2f1240 ("riscv: add riscv rethook implementation").
Replaces the kretprobe code with rethook on LoongArch. With this patch,
kretprobe on LoongArch uses the rethook instead of kretprobe specific
trampoline code.
Signed-off-by: Haoran Jiang <jianghaoran@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Add support for jump labels based on the ARM64 version.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
We can see that DEBUG_KMEMLEAK depends on HAVE_DEBUG_KMEMLEAK after
commit b69ec42b1b ("Kconfig: clean up the long arch list for the
DEBUG_KMEMLEAK config option"), just select HAVE_DEBUG_KMEMLEAK to
support kmemleak on LoongArch.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Some PMC (Power Management Controllers) need to support DTS and will use
the suspend interfaces thus this patch was to export such interfaces for
their use.
Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Loongson-3A6000 and newer processors have hardware page table walker
(PTW) support. PTW can handle all fastpaths of TLBI/TLBL/TLBS/TLBM
exceptions by hardware, software only need to handle slowpaths (page
faults).
BTW, PTW doesn't append _PAGE_MODIFIED for page table entries, so we
change pmd_dirty() and pte_dirty() to also check _PAGE_DIRTY for the
"dirty" attribute.
Signed-off-by: Liang Gao <gaoliang@loongson.cn>
Signed-off-by: Jun Yi <yijun@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Traditionally, LoongArch uses "dbar 0" (full completion barrier) for
everything. But the full completion barrier is a performance killer, so
Loongson-3A6000 and newer processors have made finer granularity hints
available:
Bit4: ordering or completion (0: completion, 1: ordering)
Bit3: barrier for previous read (0: true, 1: false)
Bit2: barrier for previous write (0: true, 1: false)
Bit1: barrier for succeeding read (0: true, 1: false)
Bit0: barrier for succeeding write (0: true, 1: false)
Hint 0x700: barrier for "read after read" from the same address, which
is needed by LL-SC loops on old models (dbar 0x700 behaves the same as
nop if such reordering is disabled on new models).
This patch makes use of the various new hints for different kinds of
memory barriers. It brings performance improvements on Loongson-3A6000
series, while not affecting the existing models because all variants are
treated as 'dbar 0' there.
Why override queued_spin_unlock()?
After commit 01e3b958ef ("drivers: Remove explicit invocations
of mmiowb()") we need a completion barrier in queued_spin_unlock(), but
the generic implementation use smp_store_release() which only provide an
ordering barrier.
Signed-off-by: Jun Yi <yijun@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Loongson-3A6000 has SMT (Simultaneous Multi-Threading) support, each
physical core has two logical cores (threads). This patch add SMT probe
and scheduler support via ACPI PPTT.
If SCHED_SMT enabled, Loongson-3A6000 is treated as 4 cores, 8 threads;
If SCHED_SMT disabled, Loongson-3A6000 is treated as 8 cores, 8 threads.
Remove smp_num_siblings to support HMP (Heterogeneous Multi-Processing).
Signed-off-by: Liupu Wang <wangliupu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
We can see that "Time namespaces are not supported" on LoongArch:
(1) clone3 test
# cd tools/testing/selftests/clone3 && make && ./clone3
...
# Time namespaces are not supported
ok 18 # SKIP Skipping clone3() with CLONE_NEWTIME
# Totals: pass:17 fail:0 xfail:0 xpass:0 skip:1 error:0
(2) timens test
# cd tools/testing/selftests/timens && make && ./timens
...
1..0 # SKIP Time namespaces are not supported
On LoongArch the current kernel does not support CONFIG_TIME_NS which
depends on GENERIC_VDSO_TIME_NS, select GENERIC_VDSO_TIME_NS to enable
CONFIG_TIME_NS to build kernel/time/namespace.c.
Additionally, it needs to define some arch-dependent functions for the
timens, such as __arch_get_timens_vdso_data(), arch_get_vdso_data() and
vdso_join_timens().
At the same time, modify the layout of vvar to use one page size for
generic vdso data, expand another page size for timens vdso data and
assign LOONGARCH_VDSO_DATA_SIZE (maybe exceeds a page size if expand in
the future) for loongarch vdso data, at last add the callback function
vvar_fault() and modify stack_top().
With this patch under CONFIG_TIME_NS:
(1) clone3 test
# cd tools/testing/selftests/clone3 && make && ./clone3
...
ok 18 [739] Result (0) matches expectation (0)
# Totals: pass:18 fail:0 xfail:0 xpass:0 skip:0 error:0
(2) timens test
# cd tools/testing/selftests/timens && make && ./timens
...
# Totals: pass:10 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The LoongArch kernel is 64-bit and built with the soft-float ABI,
hence the loongarch64-linux-gnusf target. (The "libc" part can affect
the codegen of libcalls: other arches do not use a bare-metal target,
and currently the only fully supported libc on LoongArch is glibc
anyway.)
See: https://lore.kernel.org/loongarch/CAKwvOdnimxv8oJ4mVY74zqtt1x7KTMrWvn2_T9x22SFDbU6rHQ@mail.gmail.com/
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Confirmed working with QEMU system emulation.
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
This is a port of commit 08f6554ff9 ("mips: Include KBUILD_CPPFLAGS in
CHECKFLAGS invocation") to arch/loongarch, for fixing cross-compilation
of Linux/LoongArch with Clang, where previously the `--target` flag
would no longer be present for the CHECKFLAGS cc invocation leading to
build failure.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://github.com/ClangBuiltLinux/linux/issues/1787#issuecomment-1608306002
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
This is a port of commit 76d7fff22b ("MIPS: VDSO: Use CLANG_FLAGS
instead of filtering out '--target='") to arch/loongarch, for fixing
cross-compilation with Clang.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://github.com/ClangBuiltLinux/linux/issues/1787#issuecomment-1608306002
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Now the arch code is mostly ready for LLVM/Clang consumption, it is time
to re-organize the CFLAGS a little to actually enable the LLVM build.
Namely, all -G0 switches from CFLAGS are removed, and -mexplicit-relocs
and -mdirect-extern-access are now wrapped with cc-option (with the
related asm/percpu.h definition guarded against toolchain combos that
are known to not work).
A build with !RELOCATABLE && !MODULE is confirmed working within a QEMU
environment; support for the two features are currently blocked on
LLVM/Clang, and will come later.
Why -G0 can be removed:
In GCC, -G stands for "small data threshold", that instructs the
compiler to put data smaller than the specified threshold in a dedicated
"small data" section (called .sdata on LoongArch and several other
arches).
However, benefiting from this would require ABI cooperation, which is
not the case for LoongArch; and current GCC behave the same whether -G0
(equal to disabling this optimization) is given or not. So, remove -G0
from CFLAGS altogether for one less thing to care about. This also
benefits LLVM/Clang compatibility where the -G switch is not supported.
Why -mexplicit-relocs can now be conditionally applied without
regressions:
Originally -mexplicit-relocs is unconditionally added to CFLAGS in case
of CONFIG_AS_HAS_EXPLICIT_RELOCS, because not having it (i.e. old GCC +
new binutils) would not work: modules will have R_LARCH_ABS_* relocs
inside, but given the rarity of such toolchain combo in the wild, it may
not be worthwhile to support it, so support for such relocs in modules
were not added back when explicit relocs support was upstreamed, and
-mexplicit-relocs is unconditionally added to fail the build early.
Now that Clang compatibility is desired, given Clang is behaving like
-mexplicit-relocs from day one but without support for the CLI flag, we
must ensure the flag is not passed in case of Clang. However, explicit
compiler flavor checks can be more brittle than feature detection: in
this case what actually matters is support for __attribute__((model))
when building modules. Given neither older GCC nor current Clang support
this attribute, probing for the attribute support and #error'ing out
would allow proper UX without checking for Clang, and also automatically
work when Clang support for the attribute is to be added in the future.
Why -mdirect-extern-access is now conditionally applied:
This is actually a nice-to-have optimization that can reduce GOT
accesses, but not having it is harmless either. Because Clang does not
support the option currently, but might do so in the future, conditional
application via cc-option ensures compatibility with both current and
future Clang versions.
Suggested-by: Xi Ruoyao <xry111@xry111.site> # cc-option changes
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The invtlb instruction has been supported by upstream LoongArch
toolchains from day one, so ditch the raw opcode trickery and just use
plain inline asm for it.
While at it, also make the invtlb asm statements barriers, for proper
modeling of the side effects. The functions are also marked as
__always_inline instead of just "inline", because they cannot work at
all if not inlined: the op argument will not be compile-time const in
that case, thus failing to satisfy the "i" constraint.
The signature of the other more specific invtlb wrappers contain unused
arguments right now, but these are not removed right away in order for
the patch to be focused. In the meantime, assertions are added to ensure
no accidental misuse happens before the refactor. (The more specific
wrappers cannot re-use the generic invtlb wrapper, because the ISA
manual says $zero shall be used in case a particular op does not take
the respective argument: re-using the generic wrapper would mean losing
control over the register usage.)
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
In addition to less visual clutter, this also makes Clang happy
regarding the const-ness of arguments. In the original approach, all
Clang gets to see is the incoming arguments whose const-ness cannot be
proven without first being inlined; so Clang errors out here while GCC
is fine.
While at it, tweak several printk format strings because the return type
of csr_read64 becomes effectively unsigned long, instead of unsigned
long long.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The GNU assembler (as of 2.40) mis-treats FCSR operands as GPRs, but
the LLVM IAS does not. Probe for this and refer to FCSRs as "$fcsrNN"
if support is present.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
When the kernel is compiled with LLVM, the register names being handled
during exception fixup building are ABI names instead of bare $rNN
style. Add mapping for the ABI names for LLVM compatibility.
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Taking the address delta between symbols in different sections is not
supported by the LLVM IAS. Instead, do this in the linker script, so
the same data can be properly referenced in assembly.
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: WANG Xuerui <git@xen0n.name>
[chenhuacai: Fix build with !CONFIG_EFI_STUB]
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Add guard for the larch_insn_gen_xxx functions to verify whether the
immediate operand is within the acceptable range.
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Debugfs functions are not supposed to be checked for errors. This
is sort of unusual but it is described in the comments for the
debugfs_create_dir() function. Also debugfs_create_dir() can never
return NULL.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
ACPI systems set io masters by parsing ACPI MADT, FDT systems have no
MADT so we explicitly set CPU#0 as the io master. Otherwise CPU#0 will
be considered as hotpluggable.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>