Commit graph

1,215,304 commits

Author SHA1 Message Date
Linus Torvalds
84fccbba93 spi: Updates for v6.5
One small core feature this time around but mostly driver improvements
 and additions for SPI:
 
  - Add support for controlling the idle state of MOSI, some systems can
    support this and depending on the system integration may need it to
    avoid glitching in some situations.
  - Support for polling mode in the S3C64xx driver and DMA on the
    Qualcomm QSPI driver.
  - Support for several Allwinner SoCs, AMD Pensando Elba, Intel Mount
    Evans, Renesas RZ/V2M, and ST STM32H7.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmSZkwMACgkQJNaLcl1U
 h9AOOAf+NNDaxD7ymIZ4t9RVegbC7aCS/kGWCEr2bunAfSQYI7UhduOK1U5q9mq3
 pZy3ZT0Rm+5gm1jg4WSgozM2Sn/OljTUyUFgWvxS9oF/EUSLiHpwvJAo01Y6dZsF
 ZNVCB5RuhXr++i0wgR5HSAaMd8XQAp9H2OEO4wYynFHm3zX1bMtnybZuI1AKJbKF
 fBAhKRpemSxklL+oQru1FudJEyglJcRDXYtESDPpAvU0aEdoPekdZbbS2f99SX7k
 s5jojrnwViIRSqMLqTIDu2sNUcuCn883GPzKOtU0hexE2Y+90q7gzjnustVN93w/
 uyVKsVSegb5poA1HMlK/fu2Pp3oolg==
 =SJMZ
 -----END PGP SIGNATURE-----

Merge tag 'spi-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
 "One small core feature this time around but mostly driver improvements
  and additions for SPI:

   - Add support for controlling the idle state of MOSI, some systems
     can support this and depending on the system integration may need
     it to avoid glitching in some situations

   - Support for polling mode in the S3C64xx driver and DMA on the
     Qualcomm QSPI driver

   - Support for several Allwinner SoCs, AMD Pensando Elba, Intel Mount
     Evans, Renesas RZ/V2M, and ST STM32H7"

* tag 'spi-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (66 commits)
  spi: dt-bindings: atmel,at91rm9200-spi: fix broken sam9x7 compatible
  spi: dt-bindings: atmel,at91rm9200-spi: add sam9x7 compatible
  spi: Add support for Renesas CSI
  spi: dt-bindings: Add bindings for RZ/V2M CSI
  spi: sun6i: Use the new helper to derive the xfer timeout value
  spi: atmel: Prevent false timeouts on long transfers
  spi: dt-bindings: stm32: do not disable spi-slave property for stm32f4-f7
  spi: Create a helper to derive adaptive timeouts
  spi: spi-geni-qcom: correctly handle -EPROBE_DEFER from dma_request_chan()
  spi: stm32: disable spi-slave property for stm32f4-f7
  spi: stm32: introduction of stm32h7 SPI device mode support
  spi: stm32: use dmaengine_terminate_{a}sync instead of _all
  spi: stm32: renaming of spi_master into spi_controller
  spi: dw: Remove misleading comment for Mount Evans SoC
  spi: dt-bindings: snps,dw-apb-ssi: Add compatible for Intel Mount Evans SoC
  spi: dw: Add compatible for Intel Mount Evans SoC
  spi: s3c64xx: Use dev_err_probe()
  spi: s3c64xx: Use the managed spi master allocation function
  spi: spl022: Probe defer is no error
  spi: spi-imx: fix mixing of native and gpio chipselects for imx51/imx53/imx6 variants
  ...
2023-06-28 13:48:42 -07:00
Linus Torvalds
362067b6d5 regulator: Updates for v6.5
This release is almost all drivers, there's some small improvements in
 the core but otherwise everything is updates to drivers, mostly the
 addition of new ones.
 
 There's also a bunch of changes pulled in from the MFD subsystem as
 dependencies, Rockchip and TI core MFD code that the regulator drivers
 depend on.
 
 I've also yet again managed to put a SPI commit in the regulator tree, I
 don't know what it is about those two trees (this for spi-geni-qcom).
 
  - Support for Renesas RAA215300, Rockchip RK808, Texas Instruments
    TPS6594 and TPS6287x, and X-Powers AXP15060 and AXP313a
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmSZkRUACgkQJNaLcl1U
 h9A0bAf+IM6F/vTF7R/2NTlR3M/Z7HGinxK1oit6LuZfKnveaRRCEWvBVoZzZpjs
 CzdWTPBWA2jyETzEqmX7gxYnxf2aaLieLEpKRZSh3uQd5OKmrizQDs5/OdaVUViK
 /ytmqd/IFgFfwaI+az38CQlTf+dDyuJDB0OwlkEkoaxWjeiAh6INBh6xO9aKczoW
 lFd0tOVQt1EcBKdB4tBJLTFIWWsG66xy9NZ018FrcA+bCmQVBvkbqcahayI5Q6Kw
 m5H7cZuFbKV51AlyYMF/C4Lwhy1mOT166eRmSrgxBXCsqhpFeHYkJQkmumNd3gkQ
 oSQPTZHqSblJA7Utw09mlT6r/xqL0Q==
 =/f85
 -----END PGP SIGNATURE-----

Merge tag 'regulator-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "This release is almost all drivers, there's some small improvements in
  the core but otherwise everything is updates to drivers, mostly the
  addition of new ones.

  There's also a bunch of changes pulled in from the MFD subsystem as
  dependencies, Rockchip and TI core MFD code that the regulator drivers
  depend on.

  I've also yet again managed to put a SPI commit in the regulator tree,
  I don't know what it is about those two trees (this for
  spi-geni-qcom).

  Summary:

   - Support for Renesas RAA215300, Rockchip RK808, Texas Instruments
     TPS6594 and TPS6287x, and X-Powers AXP15060 and AXP313a"

* tag 'regulator-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (43 commits)
  regulator: Add Renesas PMIC RAA215300 driver
  regulator: dt-bindings: Add Renesas RAA215300 PMIC bindings
  regulator: ltc3676: Use maple tree register cache
  regulator: ltc3589: Use maple tree register cache
  regulator: helper: Document ramp_delay parameter of regulator_set_ramp_delay_regmap()
  regulator: mt6358: Use linear voltage helpers for single range regulators
  regulator: mt6358: Const-ify mt6358_regulator_info data structures
  regulator: mt6358: Drop *_SSHUB regulators
  regulator: mt6358: Merge VCN33_* regulators
  regulator: dt-bindings: mt6358: Drop *_sshub regulators
  regulator: dt-bindings: mt6358: Merge ldo_vcn33_* regulators
  regulator: dt-bindings: pwm-regulator: Add missing type for "pwm-dutycycle-unit"
  regulator: Switch two more i2c drivers back to use .probe()
  spi: spi-geni-qcom: Do not do DMA map/unmap inside driver, use framework instead
  soc: qcom: geni-se: Add interfaces geni_se_tx_init_dma() and geni_se_rx_init_dma()
  regulator: tps6594-regulator: Add driver for TI TPS6594 regulators
  regulator: axp20x: Add AXP15060 support
  regulator: axp20x: Add support for AXP313a variant
  dt-bindings: pfuze100.yaml: Add an entry for interrupts
  regulator: stm32-pwr: Fix regulator disabling
  ...
2023-06-28 13:32:47 -07:00
Biju Das
e9bd04e52d
regulator: raa215300: Add build dependency with COMMON_CLK
The COMMON_CLK config is not enabled in some of the architectures.
This causes build issues. Fix these issues by adding build dependency.

ERROR: modpost: "clk_unregister_fixed_rate" [drivers/regulator/raa215300.ko] undefined!
ERROR: modpost: "clk_register_fixed_rate" [drivers/regulator/raa215300.ko] undefined!

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202306282012.sPQAuAN7-lkp@intel.com/
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230628174004.63984-1-biju.das.jz@bp.renesas.com
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-06-28 21:31:59 +01:00
Linus Torvalds
4171a9aa23 regmap: Updates for v6.5
Another busy release for regmap with the second half fo the maple tree
 register cache implementation, there's some smaller optimisations that
 could be done but this should now be able to replace the rbtree cache
 for most devices.
 
 We also had a followup from Aidan MacDonald's refactoring of some of the
 regmap-irq interfaces, the conversion is complete so the old interfaces
 are removed.  This means that even with the new features for the maple
 tree cache we'd have a nice negative diffstat were it not for the
 addition of a bunch more KUnit coverage.
 
 There's one GPIO patch in here, it was a dependency for a cleanup of an
 API in the regmap-irq code for which the gpio-104-dio-48e driver was the
 only user.
 
 Highlights:
 
  - The maple tree cache can now load in default values more efficiently,
    and is capabale of syncing multiple registers in a single write
    during cache sync.
  - More KUnit coverage, including some coverage for raw I/O and a dummy
    RAM backed cache to support it.
  - Removal of several old interfaces in regmap-irq now all the users
    have been modernised.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmSZj0cACgkQJNaLcl1U
 h9BNdAf+Kjw+WbqDj/glPTAfrth5aPOyheq9stklzY3mE0E+AxAsHd2PrvYwn1Rt
 jiAb96CqsVNP3WFVj6vmM/kfonE7xiBzPng2QtIWKJjxM/PYyLJZkElF6VqZz4cz
 ftS4GMAWJadOvIMZgtCFOOujTaBoN0ik2ryZYofVvI8e98W89ifLvCv4aRiJ3Qn8
 2R4Wk37JvZtIc2q5kaZ+wo+JIXVijlt7gU+9ZMT7BvJu1ot/KXY3Q3npfSK2Bv5u
 qDkMWNZoy9kNd035E8rXt2OTzMlxgUu766wpg3YGU2Hqt15N0n5rpgLc2uB24niG
 0yiCYbA2NT5J6+P+/VsE/VTBmJwK8w==
 =E+Tk
 -----END PGP SIGNATURE-----

Merge tag 'regmap-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap

Pull regmap updates from Mark Brown:
 "Another busy release for regmap with the second half of the maple tree
  register cache implementation, there's some smaller optimisations that
  could be done but this should now be able to replace the rbtree cache
  for most devices.

  We also had a followup from Aidan MacDonald's refactoring of some of
  the regmap-irq interfaces, the conversion is complete so the old
  interfaces are removed. This means that even with the new features for
  the maple tree cache we'd have a nice negative diffstat were it not
  for the addition of a bunch more KUnit coverage.

  There's one GPIO patch in here, it was a dependency for a cleanup of
  an API in the regmap-irq code for which the gpio-104-dio-48e driver
  was the only user.

  Highlights:

   - The maple tree cache can now load in default values more
     efficiently, and is capabale of syncing multiple registers
     in a single write during cache sync

   - More KUnit coverage, including some coverage for raw I/O
     and a dummy RAM backed cache to support it

   - Removal of several old interfaces in regmap-irq now all
     users have been modernised"

* tag 'regmap-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: (23 commits)
  regmap: Allow reads from write only registers with the flat cache
  regmap: Drop early readability check
  regmap: Check for register readability before checking cache during read
  regmap: Add test to make sure we don't sync to read only registers
  regmap: Add a test case for write only registers
  regmap: Add test that writes to write only registers are prevented
  regmap: Add debugfs file for forcing field writes
  regmap: Don't check for changes in regcache_set_val()
  regmap: maple: Implement block sync for the maple tree cache
  regmap: Provide basic KUnit coverage for the raw register I/O
  regmap: Provide a ram backed regmap with raw support
  regmap: Add missing cache_only checks
  regmap: regmap-irq: Move handle_post_irq to before pm_runtime_put
  regmap: Load register defaults in blocks rather than register by register
  regmap: mmio: Allow passing an empty config->reg_stride
  regmap-irq: Drop backward compatibility for inverted mask/unmask
  regmap-irq: Minor adjustments to .handle_mask_sync()
  regmap-irq: Remove support for not_fixed_stride
  regmap-irq: Remove type registers
  regmap-irq: Remove virtual registers
  ...
2023-06-28 13:26:19 -07:00
Dave Airlie
5ff2977b19 Merge tag 'drm-intel-next-fixes-2023-06-21' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
One fix for incorrect error handling in the frame buffer mmap callback,
HuC init error handling fix, missing wakeref during GSC init and a build
fix when !CONFIG_PROC_FS.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZJLI8ON96ApPTl8H@tursulin-desk
2023-06-29 06:25:26 +10:00
Linus Torvalds
1b2c92a1cb x86/mem_encrypt: Remove stale mem_encrypt_init() declaration
The memory encryption initialization logic was moved from init/main.c
into arch_cpu_finalize_init() in commit 439e17576e ("init, x86: Move
mem_encrypt_init() into arch_cpu_finalize_init()"), but a stale
declaration for the init function was left in <linux/init.h>.

And didn't cause any problems if you had X86_MEM_ENCRYPT enabled, which
apparently everybody involved did have.  See also commit 0a9567ac5e
("x86/mem_encrypt: Unbreak the AMD_MEM_ENCRYPT=n build") in this whole
sad saga of conflicting declarations for different situations.

Reported-by: Matthew Wilcox <willy@infradead.org>
Fixes: 439e17576e init, x86: Move mem_encrypt_init() into arch_cpu_finalize_init()
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-06-28 12:47:30 -07:00
Linus Torvalds
6581ccf03e mm: fix __access_remote_vm() GUP failure case
Commit ca5e863233 ("mm/gup: remove vmas parameter from
get_user_pages_remote()") removed the vma argument from GUP handling,
and instead added a helper function (get_user_page_vma_remote()) that
looks it up separately using 'vma_lookup()'.  And then converted
existing users that needed a vma to use the helper instead.

However, the helper function intentionally acts exactly like the old
get_user_pages_remote() did, and only fills in 'vma' on successful page
lookup.  Fine so far.

However, __access_remote_vm() wants the vma even for the unsuccessful
case, and used to do a

	vma = vma_lookup(mm, addr);

explicitly to look it up when the get_user_page() failed.

However, that conversion commit incorrectly removed that vma lookup,
thinking that get_user_page_vma_remote() would have done it.  Not so.

So add the vma_lookup() back in.

Fixes: ca5e863233 ("mm/gup: remove vmas parameter from get_user_pages_remote()")
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-06-28 12:20:24 -07:00
Linus Torvalds
77b1a7f7a0 - Arnd Bergmann has fixed a bunch of -Wmissing-prototypes in
top-level directories.
 
 - Douglas Anderson has added a new "buddy" mode to the hardlockup
   detector.  It permits the detector to work on architectures which
   cannot provide the required interrupts, by having CPUs periodically
   perform checks on other CPUs.
 
 - Zhen Lei has enhanced kexec's ability to support two crash regions.
 
 - Petr Mladek has done a lot of cleanup on the hard lockup detector's
   Kconfig entries.
 
 - And the usual bunch of singleton patches in various places.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZJelTAAKCRDdBJ7gKXxA
 juDkAP0VXWynzkXoojdS/8e/hhi+htedmQ3v2dLZD+vBrctLhAEA7rcH58zAVoWa
 2ejqO6wDrRGUC7JQcO9VEjT0nv73UwU=
 =F293
 -----END PGP SIGNATURE-----

Merge tag 'mm-nonmm-stable-2023-06-24-19-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull non-mm updates from Andrew Morton:

 - Arnd Bergmann has fixed a bunch of -Wmissing-prototypes in top-level
   directories

 - Douglas Anderson has added a new "buddy" mode to the hardlockup
   detector. It permits the detector to work on architectures which
   cannot provide the required interrupts, by having CPUs periodically
   perform checks on other CPUs

 - Zhen Lei has enhanced kexec's ability to support two crash regions

 - Petr Mladek has done a lot of cleanup on the hard lockup detector's
   Kconfig entries

 - And the usual bunch of singleton patches in various places

* tag 'mm-nonmm-stable-2023-06-24-19-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (72 commits)
  kernel/time/posix-stubs.c: remove duplicated include
  ocfs2: remove redundant assignment to variable bit_off
  watchdog/hardlockup: fix typo in config HARDLOCKUP_DETECTOR_PREFER_BUDDY
  powerpc: move arch_trigger_cpumask_backtrace from nmi.h to irq.h
  devres: show which resource was invalid in __devm_ioremap_resource()
  watchdog/hardlockup: define HARDLOCKUP_DETECTOR_ARCH
  watchdog/sparc64: define HARDLOCKUP_DETECTOR_SPARC64
  watchdog/hardlockup: make HAVE_NMI_WATCHDOG sparc64-specific
  watchdog/hardlockup: declare arch_touch_nmi_watchdog() only in linux/nmi.h
  watchdog/hardlockup: make the config checks more straightforward
  watchdog/hardlockup: sort hardlockup detector related config values a logical way
  watchdog/hardlockup: move SMP barriers from common code to buddy code
  watchdog/buddy: simplify the dependency for HARDLOCKUP_DETECTOR_PREFER_BUDDY
  watchdog/buddy: don't copy the cpumask in watchdog_next_cpu()
  watchdog/buddy: cleanup how watchdog_buddy_check_hardlockup() is called
  watchdog/hardlockup: remove softlockup comment in touch_nmi_watchdog()
  watchdog/hardlockup: in watchdog_hardlockup_check() use cpumask_copy()
  watchdog/hardlockup: don't use raw_cpu_ptr() in watchdog_hardlockup_kick()
  watchdog/hardlockup: HAVE_NMI_WATCHDOG must implement watchdog_hardlockup_probe()
  watchdog/hardlockup: keep kernel.nmi_watchdog sysctl as 0444 if probe fails
  ...
2023-06-28 10:59:38 -07:00
Nischala Yelchuri
55e544e1a9 x86/hyperv: Improve code for referencing hyperv_pcpu_input_arg
Several places in code for Hyper-V reference the
per-CPU variable hyperv_pcpu_input_arg. Older code uses a multi-line
sequence to reference the variable, and usually includes a cast.
Newer code does a much simpler direct assignment. The latter is
preferable as the complexity of the older code is unnecessary.

Update older code to use the simpler direct assignment.

Signed-off-by: Nischala Yelchuri <niyelchu@linux.microsoft.com>
Link: https://lore.kernel.org/r/1687286438-9421-1-git-send-email-niyelchu@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
2023-06-28 17:53:25 +00:00
Kameron Carr
a6fe043880 Drivers: hv: Change hv_free_hyperv_page() to take void * argument
Currently hv_free_hyperv_page() takes an unsigned long argument, which
is inconsistent with the void * return value from the corresponding
hv_alloc_hyperv_page() function and variants. This creates unnecessary
extra casting.

Change the hv_free_hyperv_page() argument type to void *.
Also remove redundant casts from invocations of
hv_alloc_hyperv_page() and variants.

Signed-off-by: Kameron Carr <kameroncarr@linux.microsoft.com>
Reviewed-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Link: https://lore.kernel.org/r/1687558189-19734-1-git-send-email-kameroncarr@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
2023-06-28 17:51:18 +00:00
Matthias Kaehlcke
47f04616f2 dm: verity-loadpin: Add NULL pointer check for 'bdev' parameter
Add a NULL check for the 'bdev' parameter of
dm_verity_loadpin_is_bdev_trusted(). The function is called
by loadpin_check(), which passes the block device that
corresponds to the super block of the file system from which
a file is being loaded. Generally a super_block structure has
an associated block device, however that is not always the
case (e.g. tmpfs).

Cc: stable@vger.kernel.org # v6.0+
Fixes: b6c1c5745c ("dm: Add verity helpers for LoadPin")
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20230627202800.1.Id63f7f59536d20f1ab83e1abdc1fda1471c7d031@changeid
Signed-off-by: Kees Cook <keescook@chromium.org>
2023-06-28 10:43:04 -07:00
Linus Torvalds
6e17c6de3d - Yosry Ahmed brought back some cgroup v1 stats in OOM logs.
- Yosry has also eliminated cgroup's atomic rstat flushing.
 
 - Nhat Pham adds the new cachestat() syscall.  It provides userspace
   with the ability to query pagecache status - a similar concept to
   mincore() but more powerful and with improved usability.
 
 - Mel Gorman provides more optimizations for compaction, reducing the
   prevalence of page rescanning.
 
 - Lorenzo Stoakes has done some maintanance work on the get_user_pages()
   interface.
 
 - Liam Howlett continues with cleanups and maintenance work to the maple
   tree code.  Peng Zhang also does some work on maple tree.
 
 - Johannes Weiner has done some cleanup work on the compaction code.
 
 - David Hildenbrand has contributed additional selftests for
   get_user_pages().
 
 - Thomas Gleixner has contributed some maintenance and optimization work
   for the vmalloc code.
 
 - Baolin Wang has provided some compaction cleanups,
 
 - SeongJae Park continues maintenance work on the DAMON code.
 
 - Huang Ying has done some maintenance on the swap code's usage of
   device refcounting.
 
 - Christoph Hellwig has some cleanups for the filemap/directio code.
 
 - Ryan Roberts provides two patch series which yield some
   rationalization of the kernel's access to pte entries - use the provided
   APIs rather than open-coding accesses.
 
 - Lorenzo Stoakes has some fixes to the interaction between pagecache
   and directio access to file mappings.
 
 - John Hubbard has a series of fixes to the MM selftesting code.
 
 - ZhangPeng continues the folio conversion campaign.
 
 - Hugh Dickins has been working on the pagetable handling code, mainly
   with a view to reducing the load on the mmap_lock.
 
 - Catalin Marinas has reduced the arm64 kmalloc() minimum alignment from
   128 to 8.
 
 - Domenico Cerasuolo has improved the zswap reclaim mechanism by
   reorganizing the LRU management.
 
 - Matthew Wilcox provides some fixups to make gfs2 work better with the
   buffer_head code.
 
 - Vishal Moola also has done some folio conversion work.
 
 - Matthew Wilcox has removed the remnants of the pagevec code - their
   functionality is migrated over to struct folio_batch.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZJejewAKCRDdBJ7gKXxA
 joggAPwKMfT9lvDBEUnJagY7dbDPky1cSYZdJKxxM2cApGa42gEA6Cl8HRAWqSOh
 J0qXCzqaaN8+BuEyLGDVPaXur9KirwY=
 =B7yQ
 -----END PGP SIGNATURE-----

Merge tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull mm updates from Andrew Morton:

 - Yosry Ahmed brought back some cgroup v1 stats in OOM logs

 - Yosry has also eliminated cgroup's atomic rstat flushing

 - Nhat Pham adds the new cachestat() syscall. It provides userspace
   with the ability to query pagecache status - a similar concept to
   mincore() but more powerful and with improved usability

 - Mel Gorman provides more optimizations for compaction, reducing the
   prevalence of page rescanning

 - Lorenzo Stoakes has done some maintanance work on the
   get_user_pages() interface

 - Liam Howlett continues with cleanups and maintenance work to the
   maple tree code. Peng Zhang also does some work on maple tree

 - Johannes Weiner has done some cleanup work on the compaction code

 - David Hildenbrand has contributed additional selftests for
   get_user_pages()

 - Thomas Gleixner has contributed some maintenance and optimization
   work for the vmalloc code

 - Baolin Wang has provided some compaction cleanups,

 - SeongJae Park continues maintenance work on the DAMON code

 - Huang Ying has done some maintenance on the swap code's usage of
   device refcounting

 - Christoph Hellwig has some cleanups for the filemap/directio code

 - Ryan Roberts provides two patch series which yield some
   rationalization of the kernel's access to pte entries - use the
   provided APIs rather than open-coding accesses

 - Lorenzo Stoakes has some fixes to the interaction between pagecache
   and directio access to file mappings

 - John Hubbard has a series of fixes to the MM selftesting code

 - ZhangPeng continues the folio conversion campaign

 - Hugh Dickins has been working on the pagetable handling code, mainly
   with a view to reducing the load on the mmap_lock

 - Catalin Marinas has reduced the arm64 kmalloc() minimum alignment
   from 128 to 8

 - Domenico Cerasuolo has improved the zswap reclaim mechanism by
   reorganizing the LRU management

 - Matthew Wilcox provides some fixups to make gfs2 work better with the
   buffer_head code

 - Vishal Moola also has done some folio conversion work

 - Matthew Wilcox has removed the remnants of the pagevec code - their
   functionality is migrated over to struct folio_batch

* tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (380 commits)
  mm/hugetlb: remove hugetlb_set_page_subpool()
  mm: nommu: correct the range of mmap_sem_read_lock in task_mem()
  hugetlb: revert use of page_cache_next_miss()
  Revert "page cache: fix page_cache_next/prev_miss off by one"
  mm/vmscan: fix root proactive reclaim unthrottling unbalanced node
  mm: memcg: rename and document global_reclaim()
  mm: kill [add|del]_page_to_lru_list()
  mm: compaction: convert to use a folio in isolate_migratepages_block()
  mm: zswap: fix double invalidate with exclusive loads
  mm: remove unnecessary pagevec includes
  mm: remove references to pagevec
  mm: rename invalidate_mapping_pagevec to mapping_try_invalidate
  mm: remove struct pagevec
  net: convert sunrpc from pagevec to folio_batch
  i915: convert i915_gpu_error to use a folio_batch
  pagevec: rename fbatch_count()
  mm: remove check_move_unevictable_pages()
  drm: convert drm_gem_put_pages() to use a folio_batch
  i915: convert shmem_sg_free_table() to use a folio_batch
  scatterlist: add sg_set_folio()
  ...
2023-06-28 10:28:11 -07:00
Rafael J. Wysocki
b2918089d5 intel_idle: Add __init annotation to matchup_vm_state_with_baremetal()
The caller of (recently added) matchup_vm_state_with_baremetal() is an
__init function and it uses some __initdata data structures, so add the
__init annotation to it for consistency.

This addresses the following build warnings:

WARNING: modpost: vmlinux: section mismatch in reference: matchup_vm_state_with_baremetal+0x51 (section: .text) -> intel_idle_max_cstate_reached (section: .init.text)
WARNING: modpost: vmlinux: section mismatch in reference: matchup_vm_state_with_baremetal+0x62 (section: .text) -> cpuidle_state_table (section: .init.data)
WARNING: modpost: vmlinux: section mismatch in reference: matchup_vm_state_with_baremetal+0x79 (section: .text) -> icpu (section: .init.data)

Fixes: 0fac214bb7 ("intel_idle: Add a "Long HLT" C1 state for the VM guest mode")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
2023-06-28 19:09:55 +02:00
Jens Axboe
dfbe5561ae io_uring: flush offloaded and delayed task_work on exit
io_uring offloads task_work for cancelation purposes when the task is
exiting. This is conceptually fine, but we should be nicer and actually
wait for that work to complete before returning.

Add an argument to io_fallback_tw() telling it to flush the deferred
work when it's all queued up, and have it flush a ctx behind whenever
the ctx changes.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-28 11:06:05 -06:00
Paulo Alcantara
49024ec879 smb: client: fix parsing of source mount option
Handle trailing and leading separators when parsing UNC and prefix
paths in smb3_parse_devname().  Then, store the sanitised paths in
smb3_fs_context::source.

This fixes the following cases

$ mount //srv/share// /mnt/1 -o ...
$ cat /mnt/1/d0/f0
cat: /mnt/1/d0/f0: Invalid argument

The -EINVAL was returned because the client sent SMB2_CREATE "\\d0\f0"
rather than SMB2_CREATE "\d0\f0".

$ mount //srv//share /mnt/1 -o ...
mount: Invalid argument

The -EINVAL was returned correctly although the client only realised
it after sending a couple of bad requests rather than bailing out
earlier when parsing mount options.

Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
2023-06-28 11:48:56 -05:00
Paulo Alcantara
d439b29057 smb: client: fix broken file attrs with nodfs mounts
*_get_inode_info() functions expect -EREMOTE when query path info
calls find a DFS link, regardless whether !CONFIG_CIFS_DFS_UPCALL or
'nodfs' mount option.  Otherwise, those files will miss the fake DFS
file attributes.

Before patch

  $ mount.cifs //srv/dfs /mnt/1 -o ...,nodfs
  $ ls -l /mnt/1
  ls: cannot access '/mnt/1/link': Operation not supported
  total 0
  -rwxr-xr-x 1 root root 0 Jul 26  2022 dfstest2_file1.txt
  drwxr-xr-x 2 root root 0 Aug  8  2022 dir1
  d????????? ? ?    ?    ?            ? link

After patch

  $ mount.cifs //srv/dfs /mnt/1 -o ...,nodfs
  $ ls -l /mnt/1
  total 0
  -rwxr-xr-x 1 root root 0 Jul 26  2022 dfstest2_file1.txt
  drwxr-xr-x 2 root root 0 Aug  8  2022 dir1
  drwx--x--x 2 root root 0 Jun 26 20:29 link

Fixes: c877ce47e1 ("cifs: reduce roundtrips on create/qinfo requests")
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2023-06-28 11:47:53 -05:00
Shyam Prasad N
380958ac4f cifs: print client_guid in DebugData
Having the ClientGUID info makes it easier to debug
issues related to a client on a server that serves a
number of clients.

This change prints the ClientGUID in DebugData.

Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2023-06-28 11:47:50 -05:00
Winston Wen
66be5c48ee cifs: fix session state check in smb2_find_smb_ses
Chech the session state and skip it if it's exiting.

Signed-off-by: Winston Wen <wentao@uniontech.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
2023-06-28 11:47:46 -05:00
Winston Wen
99f280700b cifs: fix session state check in reconnect to avoid use-after-free issue
Don't collect exiting session in smb2_reconnect_server(), because it
will be released soon.

Note that the exiting session will stay in server->smb_ses_list until
it complete the cifs_free_ipc() and logoff() and then delete itself
from the list.

Signed-off-by: Winston Wen <wentao@uniontech.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2023-06-28 11:47:43 -05:00
Shyam Prasad N
326a8d04f1 cifs: do all necessary checks for credits within or before locking
All the server credits and in-flight info is protected by req_lock.
Once the req_lock is held, and we've determined that we have enough
credits to continue, this lock cannot be dropped till we've made the
changes to credits and in-flight count.

However, we used to drop the lock in order to avoid deadlock with
the recent srv_lock. This could cause the checks already made to be
invalidated.

Fixed it by moving the server status check to before locking req_lock.

Fixes: d7d7a66aac ("cifs: avoid use of global locks for high contention data")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2023-06-28 11:46:58 -05:00
Shyam Prasad N
33f736187d cifs: prevent use-after-free by freeing the cfile later
In smb2_compound_op we have a possible use-after-free
which can cause hard to debug problems later on.

This was revealed during stress testing with KASAN enabled
kernel. Fixing it by moving the cfile free call to
a few lines below, after the usage.

Fixes: 76894f3e2f ("cifs: improve symlink handling for smb2+")
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2023-06-28 11:46:32 -05:00
Masahiro Yamada
f5983dab0e modpost: define more R_ARM_* for old distributions
On CentOS 7, the following build error occurs.

scripts/mod/modpost.c: In function 'addend_arm_rel':
scripts/mod/modpost.c:1312:7: error: 'R_ARM_MOVW_ABS_NC' undeclared (first use in this function); did you mean 'R_ARM_THM_ABS5'?
  case R_ARM_MOVW_ABS_NC:
       ^~~~~~~~~~~~~~~~~
       R_ARM_THM_ABS5
scripts/mod/modpost.c:1312:7: note: each undeclared identifier is reported only once for each function it appears in
scripts/mod/modpost.c:1313:7: error: 'R_ARM_MOVT_ABS' undeclared (first use in this function); did you mean 'R_ARM_THM_ABS5'?
  case R_ARM_MOVT_ABS:
       ^~~~~~~~~~~~~~
       R_ARM_THM_ABS5
scripts/mod/modpost.c:1326:7: error: 'R_ARM_THM_MOVW_ABS_NC' undeclared (first use in this function); did you mean 'R_ARM_THM_ABS5'?
  case R_ARM_THM_MOVW_ABS_NC:
       ^~~~~~~~~~~~~~~~~~~~~
       R_ARM_THM_ABS5
scripts/mod/modpost.c:1327:7: error: 'R_ARM_THM_MOVT_ABS' undeclared (first use in this function); did you mean 'R_ARM_THM_ABS5'?
  case R_ARM_THM_MOVT_ABS:
       ^~~~~~~~~~~~~~~~~~
       R_ARM_THM_ABS5

Fixes: 12ca2c67d7 ("modpost: detect section mismatch for R_ARM_{MOVW_ABS_NC,MOVT_ABS}")
Fixes: cd1824fb7a ("modpost: detect section mismatch for R_ARM_THM_{MOVW_ABS_NC,MOVT_ABS}")
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-06-29 01:36:41 +09:00
sunliming
d34a271acc selftests/user_events: Add test cases when event is disabled
When user_events are disabled, it's write operation should return -EBADF.
Add this test cases.

Link: https://lkml.kernel.org/r/20230626111344.19136-4-sunliming@kylinos.cn

Acked-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: sunliming <sunliming@kylinos.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-06-28 11:01:35 -04:00
sunliming
c27b40cf91 selftests/user_events: Enable the event before write_fault test in ftrace self-test
The user_event has not be enabled in write_fault test in ftrace
self-test, Just enable it.

Link: https://lkml.kernel.org/r/20230626111344.19136-3-sunliming@kylinos.cn

Acked-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: sunliming <sunliming@kylinos.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-06-28 11:01:35 -04:00
sunliming
f6d026eea3 tracing/user_events: Fix incorrect return value for writing operation when events are disabled
The writing operation return the count of writes regardless of whether events
are enabled or disabled. Switch it to return -EBADF to indicates that the event
is disabled.

Link: https://lkml.kernel.org/r/20230626111344.19136-2-sunliming@kylinos.cn

Cc: stable@vger.kernel.org
7f5a08c79d ("user_events: Add minimal support for trace_event into ftrace")
Acked-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: sunliming <sunliming@kylinos.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-06-28 11:00:50 -04:00
Okan Sahin
b05740d71b dt-bindings: mfd: max77541: Add ADI MAX77541/MAX77540
Add ADI MAX77541/MAX77540 devicetree document.

Signed-off-by: Okan Sahin <okan.sahin@analog.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230412111256.40013-5-okan.sahin@analog.com
Signed-off-by: Lee Jones <lee@kernel.org>
2023-06-28 15:18:36 +01:00
Okan Sahin
04c9a8eb72 iio: adc: max77541: Add ADI MAX77541 ADC Support
The MAX77541 has an 8-bit Successive Approximation Register (SAR) ADC
with four multiplexers for supporting the telemetry feature.

Signed-off-by: Okan Sahin <okan.sahin@analog.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230412111256.40013-4-okan.sahin@analog.com
Signed-off-by: Lee Jones <lee@kernel.org>
2023-06-28 15:18:11 +01:00
Okan Sahin
c2b2afe6c8 regulator: max77541: Add ADI MAX77541/MAX77540 Regulator Support
Regulator driver for both MAX77541 and MAX77540.
The MAX77541 is a high-efficiency step-down converter
with two 3A switching phases for single-cell Li+ battery
and 5VDC systems.

The MAX77540 is a high-efficiency step-down converter
with two 3A switching phases.

Signed-off-by: Okan Sahin <okan.sahin@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230412111256.40013-3-okan.sahin@analog.com
Signed-off-by: Lee Jones <lee@kernel.org>
2023-06-28 15:17:45 +01:00
Okan Sahin
8640b38234 dt-bindings: regulator: max77541: Add ADI MAX77541/MAX77540 Regulator
Add ADI MAX77541/MAX77540 Regulator devicetree document.

Signed-off-by: Okan Sahin <okan.sahin@analog.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230412111256.40013-2-okan.sahin@analog.com
Signed-off-by: Lee Jones <lee@kernel.org>
2023-06-28 15:17:21 +01:00
David Woodhouse
6c26bd4384 mm/mmap: Fix error return in do_vmi_align_munmap()
If mas_store_gfp() in the gather loop failed, the 'error' variable that
ultimately gets returned was not being set. In many cases, its original
value of -ENOMEM was still in place, and that was fine. But if VMAs had
been split at the start or end of the range, then 'error' could be zero.

Change to the 'error = foo(); if (error) goto …' idiom to fix the bug.

Also clean up a later case which avoided the same bug by *explicitly*
setting error = -ENOMEM right before calling the function that might
return -ENOMEM.

In a final cosmetic change, move the 'Point of no return' comment to
*after* the goto. That's been in the wrong place since the preallocation
was removed, and this new error path was added.

Fixes: 606c812eb1 ("mm/mmap: Fix error path in do_vmi_align_munmap()")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
2023-06-28 14:39:07 +01:00
Mauro Carvalho Chehab
190e2e1177 media: dvb: mb86a20s: get rid of a clang-15 warning
When building with clang-15: this warning is produced:

	../drivers/media/dvb-frontends/mb86a20s.c:1572:6: error: variable 'active_layers' set but not used [-Werror,-Wunused-but-set-variable]
	        int active_layers = 0, pre_ber_layers = 0, post_ber_layers = 0;
	            ^
	1 error generated.

Link: https://lore.kernel.org/linux-media/20230628130339.206261-1-mchehab@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-28 15:06:16 +02:00
Sumanth Korikkar
d15e4314ab s390/vdso: filter out mno-pic-data-is-text-relative cflag
cmd_vdso_check checks if there are any dynamic relocations in
vdso64.so.dbg. When kernel is compiled with
-mno-pic-data-is-text-relative, R_390_RELATIVE relocs are generated and
this results in kernel build error.

kpatch uses -mno-pic-data-is-text-relative option when building the
kernel to prevent relative addressing between code and data. The flag
avoids relocation error when klp text and data are too far apart

kpatch does not patch vdso code and hence the
mno-pic-data-is-text-relative flag is not essential.

Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2023-06-28 13:57:10 +02:00
Heiko Carstens
27d45655fa s390: consistently use .balign instead of .align
The .align directive has inconsistent behavior across architectures. Use
.balign instead everywhere. This is a no-op for s390, but with this there
is no mix in using .align and .balign anymore.

Future code is supposed to use only .balign.

Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2023-06-28 13:57:09 +02:00
Heiko Carstens
938f0c35d7 s390/decompressor: fix misaligned symbol build error
Nathan Chancellor reported a kernel build error on Fedora 39:

$ clang --version | head -1
clang version 16.0.5 (Fedora 16.0.5-1.fc39)

$ s390x-linux-gnu-ld --version | head -1
GNU ld version 2.40-1.fc39

$ make -skj"$(nproc)" ARCH=s390 CC=clang CROSS_COMPILE=s390x-linux-gnu- olddefconfig all
s390x-linux-gnu-ld: arch/s390/boot/startup.o(.text+0x5b4): misaligned symbol `_decompressor_end' (0x35b0f) for relocation R_390_PC32DBL
make[3]: *** [.../arch/s390/boot/Makefile:78: arch/s390/boot/vmlinux] Error 1

It turned out that the problem with misaligned symbols on s390 was fixed
with commit 80ddf5ce1c ("s390: always build relocatable kernel") for the
kernel image, but did not take into account that the decompressor uses its
own set of CFLAGS, which come without -fPIE.

Add the -fPIE flag also to the decompresser CFLAGS to fix this.

Reported-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: CKI <cki-project@redhat.com>
Suggested-by: Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1747
Link: https://lore.kernel.org/32935.123062114500601371@us-mta-9.us.mimecast.lan/
Link: https://lore.kernel.org/r/20230622125508.1068457-1-hca@linux.ibm.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2023-06-28 13:57:09 +02:00
Heiko Carstens
13cf06d57f s390/zcrypt: use kvmalloc_array() instead of kzalloc()
zcrypt_unlocked_ioctl() allocates 256k with kzalloc() which is likely to
fail if memory is fragmented. To avoid that use kvmalloc_array() instead,
like it is done at several other places for the same reason.

Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2023-06-28 13:57:09 +02:00
Sven Schnelle
0dd0bbc200 s390/vdso: check for undefined symbols after build
When adding an undefined symbol the build still succeeds, but
userspace is crashing trying to execute vdso because the
undefined symbol is not resolved. Add the check for undefined
symbols to prevent this.

Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2023-06-28 13:57:09 +02:00
Baoquan He
51f513fd96 s390/mm: do not include <asm-generic/io.h> directly
We should always include <asm/io.h> in ARCH, but not <asm-generic/io.h>
directly. Otherwise, macro defined by ARCH won't be seen and could cause
building error.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202306100105.8GHnoMCP-lkp@intel.com/
Link: https://lore.kernel.org/all/ZIWrtFMUnRfVP5h0@MiWiFi-R3L-srv/
Signed-off-by: Baoquan He <bhe@redhat.com>
[agordeev@linux.ibm.com changed patch description]
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2023-06-28 13:57:08 +02:00
Alexander Gordeev
688fcbbb9c s390/vmem: fix virtual vs physical address confusion
Fix virtual vs physical address confusion (which currently are the same).

Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2023-06-28 13:57:08 +02:00
Alexander Gordeev
456be42aa7 s390/mm: get rid of VMEM_MAX_PHYS macro
VMEM_MAX_PHYS is supposed to be the highest physical
address that can be added to the identity mapping.
It should match ident_map_size, which has the same
meaning. However, unlike ident_map_size it is not
adjusted against various limiting factors (see the
comment to setup_ident_map_size() function). That
renders all checks against VMEM_MAX_PHYS invalid.

Further, VMEM_MAX_PHYS is currently set to vmemmap,
which is an address in virtual memory space. However,
it gets compared against physical addresses in various
locations. That works, because both address spaces
are the same on s390, but otherwise it is wrong.

Instead of fixing VMEM_MAX_PHYS misuse and semantics
just remove it.

Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2023-06-28 13:57:08 +02:00
Takashi Iwai
4926a34b1b Merge branch 'topic/midi20' into for-linus
Pull a typo fix in MIDI 2.0 helper code.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-06-28 11:44:45 +02:00
Takashi Iwai
4eecae44a5 ALSA: ump: Correct wrong byte size at converting a UMP System message
A wrong size for UMP_SYSTEM_STATUS_MIDI_TIME_CODE and case
UMP_SYSTEM_STATUS_SONG_SELECT was reported at converting to the legacy
MIDI 1.0 stream.  This patch corrects the value.

Fixes: 0b5288f5fe ("ALSA: ump: Add legacy raw MIDI support")
Link: https://lore.kernel.org/r/20230628094352.15754-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-06-28 11:44:30 +02:00
Takashi Sakamoto
a64db0b9df ALSA: fireface: make read-only const array for model names static
It is preferable not to populate the constant array for constant strings
on the stack.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20230627235406.289970-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-06-28 11:42:55 +02:00
Colin Ian King
d17f0ce9a9 ALSA: oxfw: make read-only const array models static
Don't populate the const array on the stack, instead make it static.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20230627113253.700065-1-colin.i.king@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-06-28 11:42:29 +02:00
Randy Dunlap
29f96ac236 media: cec: i2c: ch7322: also select REGMAP
Selecting only REGMAP_I2C can leave REGMAP unset, causing build errors,
so also select REGMAP to prevent the build errors.

../drivers/media/cec/i2c/ch7322.c:158:21: error: variable 'ch7322_regmap' has initializer but incomplete type
  158 | static const struct regmap_config ch7322_regmap = {
../drivers/media/cec/i2c/ch7322.c:159:10: error: 'const struct regmap_config' has no member named 'reg_bits'
  159 |         .reg_bits = 8,
../drivers/media/cec/i2c/ch7322.c:159:21: warning: excess elements in struct initializer
  159 |         .reg_bits = 8,
../drivers/media/cec/i2c/ch7322.c:160:10: error: 'const struct regmap_config' has no member named 'val_bits'
  160 |         .val_bits = 8,
../drivers/media/cec/i2c/ch7322.c:160:21: warning: excess elements in struct initializer
  160 |         .val_bits = 8,
../drivers/media/cec/i2c/ch7322.c:161:10: error: 'const struct regmap_config' has no member named 'max_register'
  161 |         .max_register = 0x7f,
../drivers/media/cec/i2c/ch7322.c:161:25: warning: excess elements in struct initializer
  161 |         .max_register = 0x7f,
../drivers/media/cec/i2c/ch7322.c:162:10: error: 'const struct regmap_config' has no member named 'disable_locking'
  162 |         .disable_locking = true,
../drivers/media/cec/i2c/ch7322.c:162:28: warning: excess elements in struct initializer
  162 |         .disable_locking = true,
../drivers/media/cec/i2c/ch7322.c: In function 'ch7322_probe':
../drivers/media/cec/i2c/ch7322.c:468:26: error: implicit declaration of function 'devm_regmap_init_i2c' [-Werror=implicit-function-declaration]
  468 |         ch7322->regmap = devm_regmap_init_i2c(client, &ch7322_regmap);
../drivers/media/cec/i2c/ch7322.c:468:24: warning: assignment to 'struct regmap *' from 'int' makes pointer from integer without a cast [-Wint-conversion]
  468 |         ch7322->regmap = devm_regmap_init_i2c(client, &ch7322_regmap);
../drivers/media/cec/i2c/ch7322.c: At top level:
../drivers/media/cec/i2c/ch7322.c:158:35: error: storage size of 'ch7322_regmap' isn't known
  158 | static const struct regmap_config ch7322_regmap = {

Link: https://lore.kernel.org/linux-media/20230608025435.29249-1-rdunlap@infradead.org
Fixes: 21b9a47e0e ("media: cec: i2c: ch7322: Add ch7322 CEC controller driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jeff Chase <jnchase@google.com>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Joe Tessler <jrt@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-28 11:10:05 +02:00
Niklas Schnelle
7997604bc9 media: add HAS_IOPORT dependencies
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them.

Link: https://lore.kernel.org/linux-media/20230522105049.1467313-19-schnelle@linux.ibm.com
Reviewed-by: Sean Young <sean@mess.org> # media/rc
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-28 11:09:25 +02:00
Arnd Bergmann
582d4ad468 media: tc358746: select CONFIG_GENERIC_PHY
The tc358746 driver selects CONFIG_GENERIC_PHY_MIPI_DPHY and links to
that, but this fails when CONFIG_GENERIC_PHY is disabled, because Kbuild
then never enters the drivers/phy directory for building object files:

ERROR: modpost: "phy_mipi_dphy_get_default_config_for_hsclk" [drivers/media/i2c/tc358746.ko] undefined!

Add an explicit 'select GENERIC_PHY' here to ensure that the directory
is entered, and add another dependency on that symbol so make it
more obvious what is going on if another driver has the same problem,
as this will produce a Kconfig warning.

Link: https://lore.kernel.org/linux-media/20230623152318.2276816-1-arnd@kernel.org
Fixes: 80a21da360 ("media: tc358746: add Toshiba TC358746 Parallel to CSI-2 bridge driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-28 11:08:42 +02:00
Colin Ian King
bce1eb508b drm/edid: make read-only const array static
Don't populate the const array on the stack, instead make it static.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230627170109.751829-1-colin.i.king@gmail.com
2023-06-28 10:18:37 +03:00
Ian Rogers
628eaa4e87 perf pmus: Add placeholder core PMU
If loading a core PMU fails, legacy hardware/cache events may segv due
to there being no PMU. Create a placeholder empty PMU for this
case. This was discussed in:
https://lore.kernel.org/lkml/20230614151625.2077-1-yangjihong1@huawei.com/

Reported-by: Yang Jihong <yangjihong1@huawei.com>
Tested-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Link: https://lore.kernel.org/r/20230627182834.117565-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-06-27 23:38:39 -07:00
Linus Torvalds
6aeadf7896 Move the arm64 architecture documentation under Documentation/arch/. This
brings some order to the documentation directory, declutters the top-level
 directory, and makes the documentation organization more closely match that
 of the source.
 -----BEGIN PGP SIGNATURE-----
 
 iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmSbDsIPHGNvcmJldEBs
 d24ubmV0AAoJEBdDWhNsDH5Y+ksH/2Xqun1ipPvu66+bBdPIf8N9AVFatl2q3mt4
 tgX3A4RH3Ejklb4GbRLOIP23PmCxt7LRv4P05ttw8VpTP3A+Cw1d1s2RxiXGvfDE
 j7IW6hrpUmVoDdiDCRGtjdIa7MVI5aAsj8CCTjEFywGi5CQe0Uzq4aTUKoxJDEnu
 GYVy2CwDNEt4GTQ6ClPpFx2rc4UZf/H2XqXsnod9ef8A5Nkt3EtgoS1hh3o1QZGA
 Mqx2HAOVS1tb6GUVUbVLCdj40+YjBLjXFlsH4dA+wsFFdUlZLKuTesdiAMg2X6eT
 E8C/6oRT+OiWbrnXUTJEn8z98Ds8VHn7D4n97O9bIQ+R9AFtmPI=
 =H/+D
 -----END PGP SIGNATURE-----

Merge tag 'docs-arm64-move' of git://git.lwn.net/linux

Pull arm64 documentation move from Jonathan Corbet:
 "Move the arm64 architecture documentation under Documentation/arch/.

  This brings some order to the documentation directory, declutters the
  top-level directory, and makes the documentation organization more
  closely match that of the source"

* tag 'docs-arm64-move' of git://git.lwn.net/linux:
  perf arm-spe: Fix a dangling Documentation/arm64 reference
  mm: Fix a dangling Documentation/arm64 reference
  arm64: Fix dangling references to Documentation/arm64
  dt-bindings: fix dangling Documentation/arm64 reference
  docs: arm64: Move arm64 documentation under Documentation/arch/
2023-06-27 21:52:15 -07:00
Linus Torvalds
582c161cf3 hardening updates for v6.5-rc1
- Fix KMSAN vs FORTIFY in strlcpy/strlcat (Alexander Potapenko)
 
 - Convert strreplace() to return string start (Andy Shevchenko)
 
 - Flexible array conversions (Arnd Bergmann, Wyes Karny, Kees Cook)
 
 - Add missing function prototypes seen with W=1 (Arnd Bergmann)
 
 - Fix strscpy() kerndoc typo (Arne Welzel)
 
 - Replace strlcpy() with strscpy() across many subsystems which were
   either Acked by respective maintainers or were trivial changes that
   went ignored for multiple weeks (Azeem Shaikh)
 
 - Remove unneeded cc-option test for UBSAN_TRAP (Nick Desaulniers)
 
 - Add KUnit tests for strcat()-family
 
 - Enable KUnit tests of FORTIFY wrappers under UML
 
 - Add more complete FORTIFY protections for strlcat()
 
 - Add missed disabling of FORTIFY for all arch purgatories.
 
 - Enable -fstrict-flex-arrays=3 globally
 
 - Tightening UBSAN_BOUNDS when using GCC
 
 - Improve checkpatch to check for strcpy, strncpy, and fake flex arrays
 
 - Improve use of const variables in FORTIFY
 
 - Add requested struct_size_t() helper for types not pointers
 
 - Add __counted_by macro for annotating flexible array size members
 -----BEGIN PGP SIGNATURE-----
 
 iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAmSbftQWHGtlZXNjb29r
 QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJj0MD/9X9jzJzCmsAU+yNldeoAzC84Sk
 GVU3RBxGcTNysL1gZXynkIgigw7DWc4htMGeSABHHwQRVP65JCH1Kw/VqIkyumbx
 9LdX6IklMJb4pRT4PVU3azebV4eNmSjlur2UxMeW54Czm91/6I8RHbJOyAPnOUmo
 2oomGdP/hpEHtKR7hgy8Axc6w5ySwQixh2V5sVZG3VbvCS5WKTmTXbs6puuRT5hz
 iHt7v+7VtEg/Qf1W7J2oxfoghvVBsaRrSLrExWT/oZYh1ZxM7DsCAAoG/IsDgHGA
 9LBXiRECgAFThbHVxLvvKZQMXdVk0i8iXLX43XMKC0wTA+NTyH7wlcQQ4RWNMuo8
 sfA9Qm9gMArXaf64aymr3Uwn20Zan0391HdlbhOJZAE6v3PPJbleUnM58AzD2d3r
 5Lz6AIFBxDImy+3f9iDWgacCT5/PkeiXTHzk9QnKhJyKKtRA58XJxj4q2+rPnGJP
 n4haXqoxD5FJbxdXiGKk31RS0U5HBug7wkOcUrTqDHUbc/QNU2b7dxTKUx+zYtCU
 uV5emPzpF4H4z+91WpO47n9gkMAfwV0lt9S2dwS8pxsgqctbmIan+Jgip7rsqZ2G
 OgLXBsb43eEs+6WgO8tVt/ZHYj9ivGMdrcNcsIfikzNs/xweUJ53k2xSEn2xEa5J
 cwANDmkL6QQK7yfeeg==
 =s0j1
 -----END PGP SIGNATURE-----

Merge tag 'hardening-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

Pull hardening updates from Kees Cook:
 "There are three areas of note:

  A bunch of strlcpy()->strscpy() conversions ended up living in my tree
  since they were either Acked by maintainers for me to carry, or got
  ignored for multiple weeks (and were trivial changes).

  The compiler option '-fstrict-flex-arrays=3' has been enabled
  globally, and has been in -next for the entire devel cycle. This
  changes compiler diagnostics (though mainly just -Warray-bounds which
  is disabled) and potential UBSAN_BOUNDS and FORTIFY _warning_
  coverage. In other words, there are no new restrictions, just
  potentially new warnings. Any new FORTIFY warnings we've seen have
  been fixed (usually in their respective subsystem trees). For more
  details, see commit df8fc4e934.

  The under-development compiler attribute __counted_by has been added
  so that we can start annotating flexible array members with their
  associated structure member that tracks the count of flexible array
  elements at run-time. It is possible (likely?) that the exact syntax
  of the attribute will change before it is finalized, but GCC and Clang
  are working together to sort it out. Any changes can be made to the
  macro while we continue to add annotations.

  As an example of that last case, I have a treewide commit waiting with
  such annotations found via Coccinelle:

    https://git.kernel.org/linus/adc5b3cb48a049563dc673f348eab7b6beba8a9b

  Also see commit dd06e72e68 for more details.

  Summary:

   - Fix KMSAN vs FORTIFY in strlcpy/strlcat (Alexander Potapenko)

   - Convert strreplace() to return string start (Andy Shevchenko)

   - Flexible array conversions (Arnd Bergmann, Wyes Karny, Kees Cook)

   - Add missing function prototypes seen with W=1 (Arnd Bergmann)

   - Fix strscpy() kerndoc typo (Arne Welzel)

   - Replace strlcpy() with strscpy() across many subsystems which were
     either Acked by respective maintainers or were trivial changes that
     went ignored for multiple weeks (Azeem Shaikh)

   - Remove unneeded cc-option test for UBSAN_TRAP (Nick Desaulniers)

   - Add KUnit tests for strcat()-family

   - Enable KUnit tests of FORTIFY wrappers under UML

   - Add more complete FORTIFY protections for strlcat()

   - Add missed disabling of FORTIFY for all arch purgatories.

   - Enable -fstrict-flex-arrays=3 globally

   - Tightening UBSAN_BOUNDS when using GCC

   - Improve checkpatch to check for strcpy, strncpy, and fake flex
     arrays

   - Improve use of const variables in FORTIFY

   - Add requested struct_size_t() helper for types not pointers

   - Add __counted_by macro for annotating flexible array size members"

* tag 'hardening-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (54 commits)
  netfilter: ipset: Replace strlcpy with strscpy
  uml: Replace strlcpy with strscpy
  um: Use HOST_DIR for mrproper
  kallsyms: Replace all non-returning strlcpy with strscpy
  sh: Replace all non-returning strlcpy with strscpy
  of/flattree: Replace all non-returning strlcpy with strscpy
  sparc64: Replace all non-returning strlcpy with strscpy
  Hexagon: Replace all non-returning strlcpy with strscpy
  kobject: Use return value of strreplace()
  lib/string_helpers: Change returned value of the strreplace()
  jbd2: Avoid printing outside the boundary of the buffer
  checkpatch: Check for 0-length and 1-element arrays
  riscv/purgatory: Do not use fortified string functions
  s390/purgatory: Do not use fortified string functions
  x86/purgatory: Do not use fortified string functions
  acpi: Replace struct acpi_table_slit 1-element array with flex-array
  clocksource: Replace all non-returning strlcpy with strscpy
  string: use __builtin_memcpy() in strlcpy/strlcat
  staging: most: Replace all non-returning strlcpy with strscpy
  drm/i2c: tda998x: Replace all non-returning strlcpy with strscpy
  ...
2023-06-27 21:24:18 -07:00