Commit graph

1,215,304 commits

Author SHA1 Message Date
Xiongwei Song
c6c17c4dc3 slub: Remove CONFIG_SMP defined check
As CONFIG_SMP is one of dependencies of CONFIG_SLUB_CPU_PARTIAL, so if
CONFIG_SLUB_CPU_PARTIAL is defined then CONFIG_SMP must be defined,
no need to check CONFIG_SMP definition here.

Signed-off-by: Xiongwei Song <xiongwei.song@windriver.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
2023-05-22 15:20:21 +02:00
Xiongwei Song
81bd31793f slub: Put objects_show() into CONFIG_SLUB_DEBUG enabled block
The SO_ALL|SO_OBJECTS pair is only used when enabling CONFIG_SLUB_DEBUG
option, so the objects_show() definition should be surrounded by
CONFIG_SLUB_DEBUG too.

Signed-off-by: Xiongwei Song <xiongwei.song@windriver.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
2023-05-22 15:20:21 +02:00
Xiongwei Song
35973232b5 slub: Correct the error code when slab_kset is NULL
The -ENOSYS is inproper when kset_create_and_add call returns a NULL
pointer, the failure more likely is because lacking memory, hence
returning -ENOMEM is better.

Signed-off-by: Xiongwei Song <xiongwei.song@windriver.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
2023-05-22 15:20:21 +02:00
zhaoxinchao
444f20c29e mm/slab: correct return values in comment for _kmem_cache_create()
__kmem_cache_create() returns 0 on success and non-zero on failure.
The comment is wrong in two instances, so fix the first one and remove
the second one. Also make the comment non-doc, because it doesn't
describe an API function, but SLAB-specific implementation.

Signed-off-by: zhaoxinchao <chrisxinchao@outlook.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
2023-05-22 15:17:19 +02:00
Horatiu Vultur
23b76ba20e ARM: dts: lan966x: Add support for SMA connectors
The pcb8309 has 2 SMA connectors which are connected to the lan966x
chip. The lan966x can generate 1PPS output on one of them and it can
receive 1PPS input on the other one.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230421113758.3465678-1-horatiu.vultur@microchip.com
2023-05-22 16:00:34 +03:00
Claudiu Beznea
3ecb546333 ARM: dts: at91: use clock-controller name for sckc nodes
Use clock-controller generic name for slow clock controller nodes.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230517094119.2894220-5-claudiu.beznea@microchip.com
2023-05-22 16:00:34 +03:00
Claudiu Beznea
f4f15c5cdc ARM: dts: at91: at91sam9n12: witch sckc to new clock bindings
Switch slow clock controller to new clock bindings.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230517094119.2894220-4-claudiu.beznea@microchip.com
2023-05-22 16:00:34 +03:00
Claudiu Beznea
9a7b010116 dt-bindings: clocks: at91sam9x5-sckc: convert to yaml
Convert Atmel slow clock controller documentation to yaml.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230517094119.2894220-6-claudiu.beznea@microchip.com
2023-05-22 15:59:49 +03:00
Claudiu Beznea
fffc869be4 dt-bindings: clocks: atmel,at91rm9200-pmc: convert to yaml
Convert Atmel PMC documentation to yaml. Along with it clock names
were adapted according to the current available device trees as
different controller versions accept different clock (some of them
have 3 clocks as input, some has 2 clocks as inputs and some with 2
input clocks uses different clock names).

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230517094119.2894220-3-claudiu.beznea@microchip.com
2023-05-22 15:59:43 +03:00
Tetsuo Handa
eb799279fb debugobjects: Don't wake up kswapd from fill_pool()
syzbot is reporting a lockdep warning in fill_pool() because the allocation
from debugobjects is using GFP_ATOMIC, which is (__GFP_HIGH | __GFP_KSWAPD_RECLAIM)
and therefore tries to wake up kswapd, which acquires kswapd_wait::lock.

Since fill_pool() might be called with arbitrary locks held, fill_pool()
should not assume that acquiring kswapd_wait::lock is safe.

Use __GFP_HIGH instead and remove __GFP_NORETRY as it is pointless for
!__GFP_DIRECT_RECLAIM allocation.

Fixes: 3ac7fe5a4a ("infrastructure to debug (dynamic) objects")
Reported-by: syzbot <syzbot+fe0c72f0ccbb93786380@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/6577e1fa-b6ee-f2be-2414-a2b51b1c5e30@I-love.SAKURA.ne.jp
Closes: https://syzkaller.appspot.com/bug?extid=fe0c72f0ccbb93786380
2023-05-22 14:52:58 +02:00
Takashi Iwai
81302b1c7c ALSA: hda: Fix unhandled register update during auto-suspend period
It's reported that the recording started right after the driver probe
doesn't work properly, and it turned out that this is related with the
codec auto-suspend.  Namely, after the probe phase, the usage count
goes zero, and the auto-suspend is programmed, but the codec is kept
still active until the auto-suspend expiration.  When an application
(e.g. alsactl) updates the mixer values at this moment, the values are
cached but not actually written.  Then, starting arecord thereafter
also results in the silence because of the missing unmute.

The root cause is the handling of "lazy update" mode; when a mixer
value is updated *after* the suspend, it should update only the cache
and exits.  At the resume, the cached value is written to the device,
in turn.  The problem is that the current code misinterprets the state
of auto-suspend as if it were already suspended.

Although we can add the check of the actual device state after
pm_runtime_get_if_in_use() for catching the missing state, this won't
suffice; the second call of regmap_update_bits_check() will skip
writing the register because the cache has been already updated by the
first call.  So we'd need fixes in two different places.

OTOH, a simpler fix is to replace pm_runtime_get_if_in_use() with
pm_runtime_get_if_active() (with ign_usage_count=true).  This change
implies that the driver takes the pm refcount if the device is still
in ACTIVE state and continues the processing.  A small caveat is that
this will leave the auto-suspend timer.  But, since the timer callback
itself checks the device state and aborts gracefully when it's active,
this won't be any substantial problem.

Long story short: we address the missing register-write problem just
by replacing the pm_runtime_*() call in snd_hda_keep_power_up().

Fixes: fc4f000bf8 ("ALSA: hda - Fix unexpected resume through regmap code path")
Reported-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Closes: https://lore.kernel.org/r/a7478636-af11-92ab-731c-9b13c582a70d@linux.intel.com
Suggested-by: Cezary Rojewski <cezary.rojewski@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230518113520.15213-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-05-22 14:20:29 +02:00
Arun R Murthy
937859485a drm/i915: Support Async Flip on Linear buffers
Starting from Gen12 Async Flip is supported on linear buffers.
This patch enables support for async on linear buffer.

UseCase: In Hybrid graphics, for hardware unsupported pixel formats it
will be converted to linear memory and then composed.

v2: Added use case
v3: Added FIXME for ICL indicating the restrictions

Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220906041806.4095575-1-arun.r.murthy@intel.com
2023-05-22 17:44:38 +05:30
Andrew Cooper
6a4be69845 x86/apic: Fix use of X{,2}APIC_ENABLE in asm with older binutils
"x86/smpboot: Support parallel startup of secondary CPUs" adds the first use
of X2APIC_ENABLE in assembly, but older binutils don't tolerate the UL suffix.

Switch to using BIT() instead.

Fixes: 7e75178a09 ("x86/smpboot: Support parallel startup of secondary CPUs")
Reported-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/20230522105738.2378364-1-andrew.cooper3@citrix.com
2023-05-22 14:06:33 +02:00
Finn Thain
72b44f6577 nubus: Don't list slot resources by default
Some Nubus card ROMs contain many slot resources. A single Radius video
card produced well over a thousand entries under /proc/bus/nubus/.
Populating /proc/bus/nubus/ on a slow machine with several such cards
installed takes long enough that the user may think that the system is
wedged. All those procfs entries also consume significant RAM though
they are not normally needed (except by developers).
Omit these resources from /proc/bus/nubus/ by default and add a kernel
parameter to enable them when needed.
On the test machine, this saved 300 kB and 10 seconds.

Cc: Brad Boyer <flar@allandria.com>
Reviewed-by: Brad Boyer <flar@allandria.com>
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/71ed7fb234a5f7381a50253b0d841a656d53e64c.1684200125.git.fthain@linux-m68k.org
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2023-05-22 13:51:56 +02:00
Finn Thain
b7629ce6f4 nubus: Remove proc entries before adding them
The config ROMs on some Nubus cards contain mistakes such as resource
duplication. This results in a warning from proc_register():

    NuBus: Scanning NuBus slots.
    ------------[ cut here ]------------
    WARNING: CPU: 0 PID: 1 at fs/proc/generic.c:376 proc_register+0xbc/0xda
    proc_dir_entry '24/5' already registered
    Modules linked in:
    CPU: 0 PID: 1 Comm: swapper Not tainted 6.1.0-5-m68k #1  Debian 6.1.12-1
    Stack from 00829d18:
            00829d18 00451507 00451507 00000000 00000009 0038c57c 00451507 00386bae
            00442945 0045f062 00000178 00868580 00868f50 00386c42 0045f062 00000178
            00166fc8 00000009 00000000 00829d78 008685e4 0037f9ec 00000025 00248808
            0045f0df 00829d94 00166fc8 0045f062 00000178 00000009 0045f0df 008689e4
            008685e4 fafe3a20 00868980 00829df3 00829e32 00000024 00829dc0 00167332
            00868980 00868580 00829e40 00248d36 00829df3 00008124 00868980 00248b0c
    Call Trace: [<0038c57c>] dump_stack+0xc/0x10
     [<00386bae>] __warn+0x70/0xbc
     [<00386c42>] warn_slowpath_fmt+0x48/0x66
     [<00166fc8>] proc_register+0xbc/0xda
     [<0037f9ec>] memcmp+0x0/0x56
     [<00248808>] nubus_get_rsrc_str+0x0/0x5e
     [<00166fc8>] proc_register+0xbc/0xda
     [<00167332>] proc_create_single_data+0x40/0x48
     [<00248d36>] nubus_proc_add_rsrc_mem+0x68/0xa4
     [<00008124>] amiga_mksound+0xb8/0xc8
     [<00248b0c>] nubus_proc_rsrc_show+0x0/0xa4
     [<00386180>] memset+0x0/0x94
     [<0024864a>] nubus_readdir+0x0/0x66
     [<00560f35>] nubus_get_vendorinfo.isra.0+0x87/0x10e
     [<00560fb4>] nubus_get_vendorinfo.isra.0+0x106/0x10e
     [<00248d72>] nubus_proc_add_rsrc+0x0/0x8e
     [<001f6f50>] __dynamic_pr_debug+0x0/0x96
     [<0038741e>] _printk+0x0/0x18
     [<0016fafe>] kernfs_link_sibling+0x9a/0xaa
     [<00561cb0>] nubus_init+0x660/0x79c
     [<0037f7c6>] strcpy+0x0/0x1c
     [<0003f58c>] parse_args+0x0/0x308
     [<00002104>] do_one_initcall+0x0/0x184
     [<00561650>] nubus_init+0x0/0x79c
     [<00010000>] frc1_dst+0xe/0x14
     [<00002172>] do_one_initcall+0x6e/0x184
     [<0037f7c6>] strcpy+0x0/0x1c
     [<0003f58c>] parse_args+0x0/0x308
     [<00002104>] do_one_initcall+0x0/0x184
     [<0054b25c>] kernel_init_freeable+0x192/0x19c
     [<00561650>] nubus_init+0x0/0x79c
     [<0038c6c4>] kernel_init+0x0/0xec
     [<0038c6d8>] kernel_init+0x14/0xec
     [<0038c6c4>] kernel_init+0x0/0xec
     [<0000297c>] ret_from_kernel_thread+0xc/0x14

    ---[ end trace 0000000000000000 ]---

This particular card (a Radius video card) contains a duplicated resource
hence the /proc/bus/nubus/a/1/24/5 entry got registered twice.
(A date resource has ID 5, the vendor info directory has ID 24)

The solution for this is to remove a potentially pre-existing entry before
adding the procfs entry for the resource.

Reported-and-tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/dd1b560bbe426b351cdbb3bbf89414753c3d0117.1679446472.git.fthain@linux-m68k.org
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2023-05-22 13:51:48 +02:00
Finn Thain
0e96647cff nubus: Partially revert proc_create_single_data() conversion
The conversion to proc_create_single_data() introduced a regression
whereby reading a file in /proc/bus/nubus results in a seg fault:

    # grep -r . /proc/bus/nubus/e/
    Data read fault at 0x00000020 in Super Data (pc=0x1074c2)
    BAD KERNEL BUSERR
    Oops: 00000000
    Modules linked in:
    PC: [<001074c2>] PDE_DATA+0xc/0x16
    SR: 2010  SP: 38284958  a2: 01152370
    d0: 00000001    d1: 01013000    d2: 01002790    d3: 00000000
    d4: 00000001    d5: 0008ce2e    a0: 00000000    a1: 00222a40
    Process grep (pid: 45, task=142f8727)
    Frame format=B ssw=074d isc=2008 isb=4e5e daddr=00000020 dobuf=01199e70
    baddr=001074c8 dibuf=ffffffff ver=f
    Stack from 01199e48:
	    01199e70 00222a58 01002790 00000000 011a3000 01199eb0 015000c0 00000000
	    00000000 01199ec0 01199ec0 000d551a 011a3000 00000001 00000000 00018000
	    d003f000 00000003 00000001 0002800d 01052840 01199fa8 c01f8000 00000000
	    00000029 0b532b80 00000000 00000000 00000029 0b532b80 01199ee4 00103640
	    011198c0 d003f000 00018000 01199fa8 00000000 011198c0 00000000 01199f4c
	    000b3344 011198c0 d003f000 00018000 01199fa8 00000000 00018000 011198c0
    Call Trace: [<00222a58>] nubus_proc_rsrc_show+0x18/0xa0
     [<000d551a>] seq_read+0xc4/0x510
     [<00018000>] fp_fcos+0x2/0x82
     [<0002800d>] __sys_setreuid+0x115/0x1c6
     [<00103640>] proc_reg_read+0x5c/0xb0
     [<00018000>] fp_fcos+0x2/0x82
     [<000b3344>] __vfs_read+0x2c/0x13c
     [<00018000>] fp_fcos+0x2/0x82
     [<00018000>] fp_fcos+0x2/0x82
     [<000b8aa2>] sys_statx+0x60/0x7e
     [<000b34b6>] vfs_read+0x62/0x12a
     [<00018000>] fp_fcos+0x2/0x82
     [<00018000>] fp_fcos+0x2/0x82
     [<000b39c2>] ksys_read+0x48/0xbe
     [<00018000>] fp_fcos+0x2/0x82
     [<000b3a4e>] sys_read+0x16/0x1a
     [<00018000>] fp_fcos+0x2/0x82
     [<00002b84>] syscall+0x8/0xc
     [<00018000>] fp_fcos+0x2/0x82
     [<0000c016>] not_ext+0xa/0x18
    Code: 4e5e 4e75 4e56 0000 206e 0008 2068 ffe8 <2068> 0020 2008 4e5e 4e75 4e56 0000 2f0b 206e 0008 2068 0004 2668 0020 206b ffe8
    Disabling lock debugging due to kernel taint

    Segmentation fault

The proc_create_single_data() conversion does not work because
single_open(file, nubus_proc_rsrc_show, PDE_DATA(inode)) is not
equivalent to the original code.

Fixes: 3f3942aca6 ("proc: introduce proc_create_single{,_data}")
Cc: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org # 5.6+
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/d4e2a586e793cc8d9442595684ab8a077c0fe726.1678783919.git.fthain@linux-m68k.org
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2023-05-22 13:51:47 +02:00
Finn Thain
b845b574f8 m68k: Move signal frame following exception on 68020/030
On 68030/020, an instruction such as, moveml %a2-%a3/%a5,%sp@- may cause
a stack page fault during instruction execution (i.e. not at an
instruction boundary) and produce a format 0xB exception frame.

In this situation, the value of USP will be unreliable.  If a signal is
to be delivered following the exception, this USP value is used to
calculate the location for a signal frame.  This can result in a
corrupted user stack.

The corruption was detected in dash (actually in glibc) where it showed
up as an intermittent "stack smashing detected" message and crash
following signal delivery for SIGCHLD.

It was hard to reproduce that failure because delivery of the signal
raced with the page fault and because the kernel places an unpredictable
gap of up to 7 bytes between the USP and the signal frame.

A format 0xB exception frame can be produced by a bus error or an
address error.  The 68030 Users Manual says that address errors occur
immediately upon detection during instruction prefetch.  The instruction
pipeline allows prefetch to overlap with other instructions, which means
an address error can arise during the execution of a different
instruction.  So it seems likely that this patch may help in the address
error case also.

Reported-and-tested-by: Stan Johnson <userm57@yahoo.com>
Link: https://lore.kernel.org/all/CAMuHMdW3yD22_ApemzW_6me3adq6A458u1_F0v-1EYwK_62jPA@mail.gmail.com/
Cc: Michael Schmitz <schmitzmic@gmail.com>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Cc: stable@vger.kernel.org
Co-developed-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/9e66262a754fcba50208aa424188896cc52a1dd1.1683365892.git.fthain@linux-m68k.org
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2023-05-22 13:51:20 +02:00
David S. Miller
d49b9b0772 Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:

====================
ice: allow matching on meta data

Michal Swiatkowski says:

This patchset is intended to improve the usability of the switchdev
slow path. Without matching on a meta data values slow path works
based on VF's MAC addresses. It causes a problem when the VF wants
to use more than one MAC address (e.g. when it is in trusted mode).

Parse all meta data in the same place where protocol type fields are
parsed. Add description for the currently implemented meta data. It is
important to note that depending on DDP not all described meta data can
be available. Using not available meta data leads to error returned by
function which is looking for correct words in profiles read from DDP.

There is also one small improvement, remove of rx field in rule info
structure (patch 2). It is redundant.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-22 12:44:44 +01:00
Vineeth Vijayan
89c0c62e94 s390/cio: unregister device when the only path is gone
Currently, if the device is offline and all the channel paths are
either configured or varied offline, the associated subchannel gets
unregistered. Don't unregister the subchannel, instead unregister
offline device.

Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2023-05-22 12:45:44 +02:00
Uwe Kleine-König
efc3001f8b nfc: Switch i2c drivers back to use .probe()
After commit b8a1a4cd5a ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498 ("i2c: Switch .probe() to not take an id parameter")
convert back to (the new) .probe() to be able to eventually drop
.probe_new() from struct i2c_driver.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-22 11:41:57 +01:00
Charles Keepax
6afe2ae8dc
spi: spi-cadence: Interleave write of TX and read of RX FIFO
When working in slave mode it seems the timing is exceedingly tight.
The TX FIFO can never empty, because the master is driving the clock so
zeros would be sent for those bytes where the FIFO is empty.

Return to interleaving the writing of the TX FIFO and the reading
of the RX FIFO to try to ensure the data is available when required.

Fixes: a84c11e16d ("spi: spi-cadence: Avoid read of RX FIFO before its ready")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230518093927.711358-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-05-22 11:41:05 +01:00
Matthew Auld
c21f11d182 drm: fix drmm_mutex_init()
In mutex_init() lockdep identifies a lock by defining a special static
key for each lock class. However if we wrap the macro in a function,
like in drmm_mutex_init(), we end up generating:

int drmm_mutex_init(struct drm_device *dev, struct mutex *lock)
{
      static struct lock_class_key __key;

      __mutex_init((lock), "lock", &__key);
      ....
}

The static __key here is what lockdep uses to identify the lock class,
however since this is just a normal function the key here will be
created once, where all callers then use the same key. In effect the
mutex->depmap.key will be the same pointer for different
drmm_mutex_init() callers. This then results in impossible lockdep
splats since lockdep thinks completely unrelated locks are the same lock
class.

To fix this turn drmm_mutex_init() into a macro such that it generates a
different "static struct lock_class_key __key" for each invocation,
which looks to be inline with what mutex_init() wants.

v2:
  - Revamp the commit message with clearer explanation of the issue.
  - Rather export __drmm_mutex_release() than static inline.

Reported-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reported-by: Sarah Walker <sarah.walker@imgtec.com>
Fixes: e13f13e039 ("drm: Add DRM-managed mutex_init()")
Cc: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230519090733.489019-1-matthew.auld@intel.com
2023-05-22 12:23:50 +02:00
Pavel Begunkov
fe79bd65c8 net/tcp: refactor tcp_inet6_sk()
Don't keep hand coded offset caluclations and replace it with
container_of(). It should be type safer and a bit less confusing.

It also makes it with a macro instead of inline function to preserve
constness, which was previously casted out like in case of
tcp_v6_send_synack().

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-22 11:22:58 +01:00
Russell King
4b159f5048 net: phy: add helpers for comparing phy IDs
There are several places which open code comparing PHY IDs. Provide a
couple of helpers to assist with this, using a slightly simpler test
than the original:

- phy_id_compare() compares two arbitary PHY IDs and a mask of the
  significant bits in the ID.
- phydev_id_compare() compares the bound phydev with the specified
  PHY ID, using the bound driver's mask.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-22 11:21:48 +01:00
Russell King (Oracle)
8b6b7c1190 net: altera: tse: remove mac_an_restart() function
The mac_an_restart() method will only be called if the driver sets
legacy_pre_march2020, which the altera tse driver does not do.
Therefore, providing a stub is unnecessary.

Fixes: fef2998203 ("net: altera: tse: convert to phylink")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-22 11:20:35 +01:00
Christophe JAILLET
17cf9faeba
ASoC: rt5682s: Use the devm_clk_get_optional() helper
Use devm_clk_get_optional() instead of hand writing it.
This saves some LoC and improves the semantic.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/f538c24ad7b1926478347a03b5b7f0432e195e3b.1684594691.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-05-22 11:18:57 +01:00
Christophe JAILLET
0b855cbbd7
ASoC: cs53l30: Use the devm_clk_get_optional() helper
Use devm_clk_get_optional() instead of hand writing it.
This saves some LoC and improves the semantic.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/3219effee5c7f190530bdb1ef8ec35cb142e3611.1684594433.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-05-22 11:18:56 +01:00
Christophe JAILLET
374628fb66
ASoC: stm32: sai: Use the devm_clk_get_optional() helper
Use devm_clk_get_optional() instead of hand writing it.
This saves some LoC and improves the semantic.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/f7987f18dadf77bfa09969fd4c82d5a0f4e4e3b7.1684594838.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-05-22 11:18:55 +01:00
Christophe JAILLET
f364eb5631
ASoC: rt5659: Use the devm_clk_get_optional() helper
Use devm_clk_get_optional() instead of hand writing it.
This saves some LoC and improves the semantic.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/5b44b2fddd8973e949e4ae2132971b147cfd1ec1.1684594544.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-05-22 11:18:54 +01:00
Christophe JAILLET
c0998e0142
ASoC: cs42l51: Use the devm_clk_get_optional() helper
Use devm_clk_get_optional() instead of hand writing it.
This saves some LoC and improves the semantic.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/3debf3bb7ea504ee9ca2d8eb0f948a426681cbdd.1684594240.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-05-22 11:18:53 +01:00
Christophe JAILLET
8c03fd5fbd
ASoC: atmel: sam9g20_wm8731: Remove the unneeded include <linux/i2c.h>
This driver does not use i2c, so there is no point in including
<linux/i2c.h>

Remove it.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/9b39a59f5829d200d7d1fac4e993dbf8ce05836d.1684578051.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-05-22 11:18:52 +01:00
Christophe JAILLET
ef44ba2199
ASoC: adau1761: Use the devm_clk_get_optional() helper
Use devm_clk_get_optional() instead of hand writing it.
This saves some LoC and improves the semantic.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/ab0fe7e7ecf965df84b9516ba65428af9b3805c1.1684594081.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-05-22 11:18:51 +01:00
Amadeusz Sławiński
f9d1fe7e81
ASoC: topology: Remove redundant log
soc_tplg_valid_header() logs all the failures in detail already.

Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230519195611.4068853-6-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-05-22 11:18:47 +01:00
Amadeusz Sławiński
db756c5c35
ASoC: topology: Remove redundant log
soc_tplg_dapm_complete() logs all the failures in detail already.

Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230519195611.4068853-5-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-05-22 11:18:46 +01:00
Amadeusz Sławiński
5308540278
ASoC: topology: Do not split message string on multiple lines
Kernel coding guidelines recommend to not split string unnecessarily.
While at it adapt the other print present in the function to 100
characters line limit.

Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230519195611.4068853-4-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-05-22 11:18:45 +01:00
Amadeusz Sławiński
2316c11fa9
ASoC: topology: Remove redundant logs
soc_tplg_add_kcontrol() logs all the failures in detail already.

Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230519195611.4068853-3-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-05-22 11:18:44 +01:00
Amadeusz Sławiński
ec5dffcd42
ASoC: topology: Log control load errors in soc_tplg_control_load()
Simplify code by logging any errors in function that does the actual
work instead of doing so in its callers.

Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230519195611.4068853-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-05-22 11:18:43 +01:00
Peter Ujfalusi
d8a2c98793
ASoC: SOF: ipc4-loader/topology: Query the CPC value from manifest
The manifest's firmware module configuration section contains the measured
CPC values along with a matching IBS/OBS values.

The CPC can be looked up by looking for a matching IBS/OBS entry.
In case of multiple matches we will use the highest CPC value.

If there is no mod_cfg or no CPC value (all 0) or no match was found then
print warning message and use 0 as CPC value.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230522101313.12519-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-05-22 11:18:38 +01:00
Peter Ujfalusi
9caa901805
ASoC: SOF: ipc4-topology: Do not use the CPC value from topology
Stop parsing the CPC value from topology to module_base_cfg.
The CPC value is only set for few modules in topology which makes the CPC
handling inconsistent.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230522101313.12519-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-05-22 11:18:37 +01:00
Peter Ujfalusi
19c745d1fd
ASoC: SOF: ipc4-topology: Rename sof_ipc4_update_pipeline_mem_usage() to be generic
Rename sof_ipc4_update_pipeline_mem_usage() to
sof_ipc4_update_resource_usage() in order to be re-usable for generic
resource storage, calculation of a module, like CPC adjustment.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230522101313.12519-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-05-22 11:18:37 +01:00
Peter Ujfalusi
fe04f30003
ASoC: SOF: ipc4-loader: Save a pointer to fm_config in sof_ipc4_fw_module
Save a pointer to the firmware module configuration area in
sof_ipc4_fw_module struct for later use.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230522101313.12519-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-05-22 11:18:36 +01:00
Peter Ujfalusi
d474809e92
ASoC: SOF: ipc4-loader: Drop unused bss_size from struct sof_ipc4_fw_module
The bss_size is only set, but not used by the code, remove it.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230522101313.12519-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-05-22 11:18:34 +01:00
David Epping
3a2e3fa795
ASoC: dt-bindings: tlv320aic32x4: Fix supply names
The term "-supply" is a suffix to regulator names.

Signed-off-by: David Epping <david.epping@missinglinkelectronics.com>
Link: https://lore.kernel.org/r/20230519110545.GA18663@nucnuc.mle
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-05-22 11:18:31 +01:00
Amadeusz Sławiński
25148f57a2
ASoC: Intel: avs: Add missing checks on FE startup
Constraint functions have return values, they should be checked for
potential errors.

Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230519201711.4073845-8-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-05-22 11:18:26 +01:00
Amadeusz Sławiński
320f4d868b
ASoC: Intel: avs: Fix avs_path_module::instance_id size
All IPCs using instance_id use 8 bit value. Original commit used 16 bit
value because FW reports possible max value in 16 bit field, but in
practice FW limits the value to 8 bits.

Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230519201711.4073845-7-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-05-22 11:18:25 +01:00
Cezary Rojewski
836855100b
ASoC: Intel: avs: Account for UID of ACPI device
Configurations with multiple codecs attached to the platform are
supported but only if each from the set is different. Add new field
representing the 'Unique ID' so that codecs that share Vendor and Part
IDs can be differentiated and thus enabling support for such
configurations.

Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230519201711.4073845-6-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-05-22 11:18:24 +01:00
Cezary Rojewski
1cf036deeb
ASoC: Intel: avs: Fix declaration of enum avs_channel_config
Constant 'C4_CHANNEL' does not exist on the firmware side. Value 0xC is
reserved for 'C7_1' instead.

Fixes: 580a5912d1 ("ASoC: Intel: avs: Declare module configuration types")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230519201711.4073845-5-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-05-22 11:18:23 +01:00
Cezary Rojewski
9510965747
ASoC: Intel: Skylake: Fix declaration of enum skl_ch_cfg
Constant 'C4_CHANNEL' does not exist on the firmware side. Value 0xC is
reserved for 'C7_1' instead.

Fixes: 04afbbbb1c ("ASoC: Intel: Skylake: Update the topology interface structure")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230519201711.4073845-4-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-05-22 11:18:22 +01:00
Amadeusz Sławiński
d849996f74
ASoC: Intel: avs: Access path components under lock
Path and its components should be accessed under lock to prevent
problems with one thread modifying them while other tries to read.

Fixes: c8c960c109 ("ASoC: Intel: avs: APL-based platforms support")
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230519201711.4073845-3-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-05-22 11:18:21 +01:00
Amadeusz Sławiński
ff04437f6d
ASoC: Intel: avs: Fix module lookup
When changing value of kcontrol, FW module to which data should be send
needs to be found. Currently it is done in improper way, fix it. Change
function name to indicate that it looks only for volume module.

This allows to change volume during runtime, instead of only changing
init value.

Fixes: be2b81b519 ("ASoC: Intel: avs: Parse control tuples")
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230519201711.4073845-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-05-22 11:18:20 +01:00