Commit graph

1,215,304 commits

Author SHA1 Message Date
Arnd Bergmann
dbb99d7852 net: ipconfig: move ic_nameservers_fallback into #ifdef block
The new variable is only used when IPCONFIG_BOOTP is defined and otherwise
causes a warning:

net/ipv4/ipconfig.c:177:12: error: 'ic_nameservers_fallback' defined but not used [-Werror=unused-variable]

Move it next to the user.

Fixes: 81ac2722fa ("net: ipconfig: Allow DNS to be overwritten by DHCPACK")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-22 11:17:55 +01:00
Wei Fang
2ae9c66b04 net: fec: remove useless fec_enet_reset_skb()
This patch is a cleanup for fec driver. The fec_enet_reset_skb()
is used to free skb buffers for tx queues and is only invoked in
fec_restart(). However, fec_enet_bd_init() also resets skb buffers
and is invoked in fec_restart() too. So fec_enet_reset_skb() is
redundant and useless.

Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-22 11:10:49 +01:00
Wei Fang
e4ac7cc6e5 net: fec: turn on XDP features
The XDP features are supported since the commit 66c0e13ad2
("drivers: net: turn on XDP features"). Currently, the fec
driver supports NETDEV_XDP_ACT_BASIC, NETDEV_XDP_ACT_REDIRECT
and NETDEV_XDP_ACT_NDO_XMIT. So turn on these XDP features
for fec driver.

Signed-off-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-22 11:09:53 +01:00
Xin Long
6ca328e985 sctp: fix an issue that plpmtu can never go to complete state
When doing plpmtu probe, the probe size is growing every time when it
receives the ACK during the Search state until the probe fails. When
the failure occurs, pl.probe_high is set and it goes to the Complete
state.

However, if the link pmtu is huge, like 65535 in loopback_dev, the probe
eventually keeps using SCTP_MAX_PLPMTU as the probe size and never fails.
Because of that, pl.probe_high can not be set, and the plpmtu probe can
never go to the Complete state.

Fix it by setting pl.probe_high to SCTP_MAX_PLPMTU when the probe size
grows to SCTP_MAX_PLPMTU in sctp_transport_pl_recv(). Also, not allow
the probe size greater than SCTP_MAX_PLPMTU in the Complete state.

Fixes: b87641aff9 ("sctp: do state transition when a probe succeeds on HB ACK recv path")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-22 11:05:20 +01:00
Claudiu Beznea
d08f92bdfb ARM: dts: at91: use clock-controller name for PMC nodes
Use clock-controller generic name for PMC nodes.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230517094119.2894220-2-claudiu.beznea@microchip.com
2023-05-22 12:26:35 +03:00
Peter Rosin
08e4dd1d12 ARM: dts: at91: tse850: add properties for gpio-line-names
Signal names are one-to-one copies from the schematics, except VBUS
which is an unnamed signal there.

Signed-off-by: Peter Rosin <peda@axentia.se>
[claudiu.beznea: add 1 indentation tab before index based comment]
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/32995b53-7f73-936f-a81d-5f1969f64910@axentia.se
2023-05-22 12:23:44 +03:00
Artur Weber
0dd53308f7 MAINTAINERS: Add entry for Samsung S6D7AA0 LCD panel controller driver
Add myself as maintainer of the Samsung S6D7AA0 panel driver.

Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230519170354.29610-4-aweber.kernel@gmail.com
2023-05-22 11:11:48 +02:00
Artur Weber
6810bb3902 drm/panel: Add Samsung S6D7AA0 panel controller driver
Initial driver for S6D7AA0-controlled panels. Currently, the following
panels are supported:

 - S6D7AA0-LSL080AL02 (Samsung Galaxy Tab 3 8.0)
 - S6D7AA0-LSL080AL03 (Samsung Galaxy Tab A 8.0 2015)
 - S6D7AA0-LTL101AT01 (Samsung Galaxy Tab A 9.7 2015)

It should be possible to extend this driver to work with other panels
using this IC.

Tested-by: Nikita Travkin <nikita@trvn.ru> #ltl101at01
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230519170354.29610-3-aweber.kernel@gmail.com
2023-05-22 11:11:47 +02:00
Artur Weber
dda4456514 dt-bindings: display: panel: Add Samsung S6D7AA0 LCD panel controller
Add bindings for the S6D7AA0 LCD panel controller, including the
S6D7AA0-LSL080AL02 panel used in the Samsung Galaxy Tab 3 8.0 family
of tablets, and the S6D7AA0-LSL080AL03 and S6D7AA0-LTL101AT01 panels
used in the Samsung Galaxy Tab A 8.0 and 9.7 2015.

Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230519170354.29610-2-aweber.kernel@gmail.com
2023-05-22 11:11:46 +02:00
Krzysztof Kozlowski
861601ff7f drm/i915: constify pointers to hwmon_channel_info
Statically allocated array of pointers to hwmon_channel_info can be made
const for safety.

Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230511175446.282041-1-krzysztof.kozlowski@linaro.org
2023-05-22 12:03:49 +03:00
Rob Herring
a319885106 clk: microchip: Use of_property_read_bool() for boolean properties
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties.
Convert reading boolean properties to to of_property_read_bool().

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230310144701.1541573-1-robh@kernel.org
2023-05-22 11:57:31 +03:00
Conor Dooley
f3e788d9ec clk: microchip: convert SOC_MICROCHIP_POLARFIRE to ARCH_MICROCHIP_POLARFIRE
As part of converting RISC-V SOC_FOO symbols to ARCH_FOO to match the
use of such symbols on other architectures, convert the Microchip FPGA
clock drivers to use the new symbol.

Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230309204452.969574-2-conor@kernel.org
2023-05-22 11:57:27 +03:00
Bartosz Golaszewski
a499a6b203 pinctrl: qcom: sa8775p: add the wakeirq map
The SA8775P TLMM driver is missing the GPIO-to-wakeup-pin mapping. This
adds it.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230515092515.180920-1-brgl@bgdev.pl
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-05-22 09:28:02 +02:00
Dmitry Baryshkov
6c93a21d92 drm/msm/dpu: move PINGPONG_NONE check to dpu_lm_init()
Move the check for lm->pingpong being not NONE from dpu_rm_init() to
dpu_lm_init(), following the change to dpu_hw_intf_init().

Suggested-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/538206/
Link: https://lore.kernel.org/r/20230519234025.2864377-5-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-05-22 10:14:19 +03:00
Dmitry Baryshkov
76c40f1463 drm/msm/dpu: use PINGPONG_NONE for LMs with no PP attached
On msm8998/sdm845 some LM blocks do not have corresponding PINGPONG
block. Currently the driver uses PINGPONG_MAX for such cases. Switch
that to use PINGPONG_NONE instead, which is more logical.

Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/538205/
Link: https://lore.kernel.org/r/20230519234025.2864377-4-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-05-22 10:14:19 +03:00
Dmitry Baryshkov
f89fdc862b drm/msm/dpu: remove futile checks from dpu_rm_init()
dpu_rm_init() contains checks for block->id values. These were logical
in the vendor driver, when one can not be sure which values were passed
from DT. In the upstream driver this is not necessary: the catalog is a
part of the driver, we control specified IDs.

Suggested-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/538204/
Link: https://lore.kernel.org/r/20230519234025.2864377-3-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-05-22 10:14:19 +03:00
Dmitry Baryshkov
50883f733c drm/msm/dpu: replace IS_ERR_OR_NULL with IS_ERR during DSC init
Using IS_ERR_OR_NULL() together with PTR_ERR() is a typical mistake. If
the value is NULL, then the function will return 0 instead of a proper
return code. Moreover dpu_hw_dsc_init() can not return NULL.
Replace the IS_ERR_OR_NULL() call with IS_ERR().

This follows the commit 740828c73a ("drm/msm/dpu: fix error handling
in dpu_rm_init"), which removed IS_ERR_OR_NULL() from RM init code, but
then the commit f2803ee91a ("drm/msm/disp/dpu1: Add DSC support in
RM") added it for DSC init.

Suggested-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/538203/
Link: https://lore.kernel.org/r/20230519234025.2864377-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-05-22 10:14:19 +03:00
Konrad Dybcio
a7129231ed drm/msm/dpu: Set DPU_DATA_HCTL_EN for in INTF_SC7180_MASK
DPU5 and newer targets enable this unconditionally. Move it from the
SC7280 mask to the SC7180 one.

Fixes: 7e6ee55320 ("drm/msm/disp/dpu1: enable DATA_HCTL_EN for sc7280 target")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/538159/
Link: https://lore.kernel.org/r/20230508-topic-hctl_en-v2-1-e7bea9f1f5dd@linaro.org
[DB: removed BIT(DPU_INTF_DATA_COMPRESS), which is not yet merged]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-05-22 10:14:19 +03:00
Dmitry Baryshkov
babbd0a5f3 drm/msm/dpu: access CSC/CSC10 registers directly
Stop using _sspp_subblk_offset() to get offset of the csc_blk. Inline
this function and use ctx->cap->sblk->csc_blk.base directly.

As this was the last user, drop _sspp_subblk_offset() too.

Reviewed-by: Jeykumar Sankaran <quic_jeykumar@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/534747/
Link: https://lore.kernel.org/r/20230429012353.2569481-4-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-05-22 10:14:19 +03:00
Dmitry Baryshkov
be7057e0d4 drm/msm/dpu: access QSEED registers directly
Stop using _sspp_subblk_offset() to get offset of the scaler_blk. Inline
this function and use ctx->cap->sblk->scaler_blk.base directly.

Reviewed-by: Jeykumar Sankaran <quic_jeykumar@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/534746/
Link: https://lore.kernel.org/r/20230429012353.2569481-3-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-05-22 10:14:19 +03:00
Dmitry Baryshkov
7e3d6c548b drm/msm/dpu: drop SSPP's SRC subblock
The src_blk declares a lame copy of main SSPP register space. It's
offset is always 0. It's length has been fixed to 0x150, while SSPP's
length is now correct. Drop the src_blk and access SSPP registers
without additional subblock lookup.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/534745/
Link: https://lore.kernel.org/r/20230429012353.2569481-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-05-22 10:14:18 +03:00
Marijn Suijten
f1584d89c1 drm/msm/dpu: Remove intr_rdptr from DPU >= 5.0.0 pingpong config
Now that newer DPU platforms use a readpointer-done interrupt on the
INTF block, stop providing the unused interrupt on the PINGPONG block.

Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/534238/
Link: https://lore.kernel.org/r/20230411-dpu-intf-te-v4-22-27ce1a5ab5c6@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-05-22 10:14:18 +03:00
Marijn Suijten
e955a3f0d8 drm/msm/dpu: Implement tearcheck support on INTF block
Since DPU 5.0.0 the TEARCHECK registers and interrupts moved out of the
PINGPONG block and into the INTF.  Implement the necessary callbacks in
the INTF block, and use these callbacks together with the INTF_TEAR
interrupts.

Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/534234/
Link: https://lore.kernel.org/r/20230411-dpu-intf-te-v4-21-27ce1a5ab5c6@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-05-22 10:14:18 +03:00
Marijn Suijten
bb9f1880ca drm/msm/dpu: Merge setup_- and enable_tearcheck pingpong callbacks
These functions are always called consecutively and are best bundled
together for simplicity, especially when the same structure of callbacks
will be replicated later on the interface block for INTF TE support.
The enable_tearcheck(false) case is now replaced with a more obvious
disable_tearcheck(), encapsulating the original register write with 0.

Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/534217/
Link: https://lore.kernel.org/r/20230411-dpu-intf-te-v4-20-27ce1a5ab5c6@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-05-22 10:14:18 +03:00
Marijn Suijten
0272b9c3b5 drm/msm/dpu: Add TEAR-READ-pointer interrupt to INTF block
All SoCs since DPU 5.0.0 have the tear interrupt registers moved out of
the PINGPONG block and into the INTF block.  The new interrupts are
described in dpu_hw_interrupts.c, now wire them up in individual SoC
catalog files by setting the intr_tear_rd_ptr to the IRQ index spcified
in the offset table and enabling this set of DPU interrupts via the
mdss_irqs bitmask.

Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/534236/
Link: https://lore.kernel.org/r/20230411-dpu-intf-te-v4-19-27ce1a5ab5c6@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-05-22 10:14:18 +03:00
Marijn Suijten
ec6e9b673a drm/msm/dpu: Describe TEAR interrupt registers for DSI interfaces
All SoCs since DPU 5.0.0 have the tear interrupt registers moved out of
the PINGPONG block and into the INTF block.  Wire up the IRQ register
masks in the interrupt table for enabling, reading and clearing them.

Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/534244/
Link: https://lore.kernel.org/r/20230411-dpu-intf-te-v4-18-27ce1a5ab5c6@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-05-22 10:14:18 +03:00
Marijn Suijten
a38a9949a9 drm/msm/dpu: Factor out shared interrupt register in INTF_BLK macro
As the INTF block is going to attain more interrupts that don't share
the same MDP_SSPP_TOP0_INTR register, factor out the _reg argument for
the caller to construct the right interrupt index (register and bit
index) to not make the interrupt bit arguments depend on one of multiple
interrupt register indices.  This brings us more in line with how PP_BLK
specifies its interrupts and allows for better wrapping in the arrays.

Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/534222/
Link: https://lore.kernel.org/r/20230411-dpu-intf-te-v4-17-27ce1a5ab5c6@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-05-22 10:14:18 +03:00
Konrad Dybcio
c31ec42ebb drm/msm/dpu: Move dpu_hw_{tear_check, pp_vsync_info} to dpu_hw_mdss.h
Now that newer SoCs since DPU 5.0.0 manage tearcheck in the INTF instead
of PINGPONG block, move the struct definition to a common file. Also,
bring in documentation from msm-4.19 techpack while at it.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
[Marijn: Also move dpu_hw_pp_vsync_info]
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/534232/
Link: https://lore.kernel.org/r/20230411-dpu-intf-te-v4-16-27ce1a5ab5c6@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-05-22 10:14:18 +03:00
Marijn Suijten
a2ff096803 drm/msm/dpu: Disable MDP vsync source selection on DPU 5.0.0 and above
Since hardware revision 5.0.0 the TE configuration moved out of the
PINGPONG block into the INTF block, including vsync source selection
that was previously part of MDP top.  Writing to the MDP_VSYNC_SEL
register has no effect anymore and is omitted downstream via the
DPU/SDE_MDP_VSYNC_SEL feature flag.  This flag is only added to INTF
blocks used by hardware prior to 5.0.0.

The code that writes to these registers in the INTF block will follow in
subsequent patches.

Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/534220/
Link: https://lore.kernel.org/r/20230411-dpu-intf-te-v4-15-27ce1a5ab5c6@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-05-22 10:14:18 +03:00
Marijn Suijten
fe9d66cf6e drm/msm/dpu: Disable pingpong TE on DPU 5.0.0 and above
Since hardware revision 5.0.0 the TE configuration moved out of the
PINGPONG block into the INTF block.  Writing these registers has no
effect, and is omitted downstream via the DPU/SDE_PINGPONG_TE feature
flag.  This flag is only added to PINGPONG blocks used by hardware prior
to 5.0.0.

The existing PP_BLK_TE macro has been removed in favour of directly
passing this feature flag, which has thus far been the only difference
with PP_BLK.  PP_BLK_DITHER has been left in place as its embedded
feature flag already excludes this DPU_PINGPONG_TE bit and differs by
setting the block length to zero, as it only contains a DITHER subblock.

The code that writes to these registers in the INTF block will follow in
subsequent patches.

Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/534240/
Link: https://lore.kernel.org/r/20230411-dpu-intf-te-v4-14-27ce1a5ab5c6@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-05-22 10:14:18 +03:00
Marijn Suijten
4a7c38ec7d drm/msm/dpu: Move autorefresh disable from CMD encoder to pingpong
This autorefresh disable logic in the physical command-mode encoder
consumes three callbacks to the pingpong block, and will explode in
unnecessary complexity when the same callbacks need to be called on the
interface block instead to accommodate INTF TE support.  To clean this
up, move the logic into the pingpong block under a disable_autorefresh
callback, replacing the aforementioned three get_autorefresh,
setup_autorefresh and get_vsync_info callbacks.

The same logic will have to be replicated to the interface block when it
receives INTF TE support, but it is less complex than constantly
switching on a "has_intf_te" boolean to choose a callback.

Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/534230/
Link: https://lore.kernel.org/r/20230411-dpu-intf-te-v4-13-27ce1a5ab5c6@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-05-22 10:14:17 +03:00
Marijn Suijten
a2623e72c5 drm/msm/dpu: Drop unused poll_timeout_wr_ptr PINGPONG callback
This callback was migrated from downstream when DPU1 was first
introduced to mainline, but never used by any component.  Drop it to
save some lines and unnecessary confusion.

Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/534215/
Link: https://lore.kernel.org/r/20230411-dpu-intf-te-v4-12-27ce1a5ab5c6@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-05-22 10:14:17 +03:00
Marijn Suijten
f0408020bf drm/msm/dpu: Take INTF index as parameter in interrupt register defines
Instead of hardcoding many register defines for every INTF and AD4 index
with a fixed stride, turn the defines into singular chunks of math that
compute the address using the base and this fixed stride multiplied by
the index given as argument to the definitions.

MDP_SSPP_TOP0_OFF is dropped as that constant is zero anyway, and all
register offsets related to it live in dpu_hwio.h.

Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/534221/
Link: https://lore.kernel.org/r/20230411-dpu-intf-te-v4-11-27ce1a5ab5c6@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-05-22 10:14:17 +03:00
Marijn Suijten
d80d7f8912 drm/msm/dpu: Sort INTF registers numerically
A bunch of registers were appended at the end in e.g. commit
91143873a0 ("drm/msm/dpu: Add MISR register support for interface")
rather than being inserted in a place that maintains numerical sorting:
restore said numerical sorting.

Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/534213/
Link: https://lore.kernel.org/r/20230411-dpu-intf-te-v4-10-27ce1a5ab5c6@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-05-22 10:14:17 +03:00
Marijn Suijten
d9388af508 drm/msm/dpu: Remove extraneous register define indentation
A bunch of registers are indented with two extra spaces, looking as if
these are values corresponding to the previous register which is not the
case, rather these are simply also register offsets and should only have
a single space separating them and the #define keyword.

Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/534218/
Link: https://lore.kernel.org/r/20230411-dpu-intf-te-v4-9-27ce1a5ab5c6@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-05-22 10:14:17 +03:00
Marijn Suijten
853b292b92 drm/msm/dpu: Use V4.0 PCC DSPP sub-block in SC7[12]80
According to various downstream sources the PCC sub-block inside DSPP is
version 4.0 since DPU 4.0 and higher, including SC7[12]80 at DPU version
6.2 and 7.2 respectively.  After correcting the version this struct
becomes identical to sm8150_dspp_sblk which is used all across the
catalog: replace uses of sc7180_dspp_sblk with that and remove
the struct definition for sc7180_dspp_sblk entirely.

Fixes: 4259ff7ae5 ("drm/msm/dpu: add support for pcc color block in dpu driver")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/537899/
Link: https://lore.kernel.org/r/20230518-dpu-sc7180-pcc-version-v1-1-ec9ca4949e3e@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-05-22 10:14:17 +03:00
Abhinav Kumar
3ce1663805 drm/msm/dpu: add writeback support for sc7280
Add writeback support for sc7280. This was validated with kms_writeback
test case in IGT.

Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/535244/
Link: https://lore.kernel.org/r/20230503223905.24754-1-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-05-22 10:14:17 +03:00
Dmitry Baryshkov
5278833811 drm/msm/dpu: drop unused SSPP sub-block information
The driver doesn't support hsic/memcolor and pcc SSPP subblocks.
Drop corresponding definitions.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/534766/
Link: https://lore.kernel.org/r/20230429212512.2947245-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-05-22 10:14:17 +03:00
Abhinav Kumar
732c2c5298 drm/msm/dpu: drop DSPP_MSM8998_MASK from hw catalog
Since GC and IGC masks have now been dropped, DSPP_MSM8998_MASK
is the same as DSPP_SC7180_MASK. Since DSPP_SC7180_MASK is used more
than DSPP_MSM8998_MASK, lets drop the latter.

Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/534726/
Link: https://lore.kernel.org/r/20230428223646.23595-4-quic_abhinavk@quicinc.com
[DB: fixed typo in commit message]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-05-22 10:14:17 +03:00
Abhinav Kumar
9fd5aa5ae7 drm/msm/dpu: remove GC and IGC related code from dpu catalog
Gamma Correction (GC) and Inverse Gamma Correction(IGC) is
currently unused. In addition dpu_dspp_sub_blks didn't even have an igc
member describing the block.

Drop related code from the dpu hardware catalog otherwise this becomes a
burden to carry across chipsets in the catalog.

changes in v3:
	- drop IGC related code from dpu_hw_catalog too
	- update commit text accordingly

Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/534725/
Link: https://lore.kernel.org/r/20230428223646.23595-3-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-05-22 10:14:17 +03:00
Abhinav Kumar
7debb6bb69 drm/msm/dpu: remove DPU_DSPP_IGC handling in dspp flush
Inverse gamma correction blocks (IGC) are not used today so lets
remove the usage of DPU_DSPP_IGC in the DSPP flush to make it easier
to remove IGC from the catalog.

We can add this back when IGC is properly supported in DPU with
one of the standard DRM properties.

changes in v3:
	- minor change dspp -> DSPP in commit text

Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/534724/
Link: https://lore.kernel.org/r/20230428223646.23595-2-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-05-22 10:14:16 +03:00
Abhinav Kumar
198d8c9c0a drm/msm/dpu: remove DPU_DSPP_GC handling in dspp flush
Gamma correction blocks (GC) are not used today so lets remove
the usage of DPU_DSPP_GC in the dspp flush to make it easier
to remove GC from the catalog.

We can add this back when GC is properly supported in DPU with
one of the standard DRM properties.

changes in v3:
	- drop the link tag which was auto added before

Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/534723/
Link: https://lore.kernel.org/r/20230428223646.23595-1-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-05-22 10:14:16 +03:00
Marijn Suijten
babdb815ef drm/msm/dpu: Pass catalog pointers in RM to replace for-loop ID lookups
The Resource Manager already iterates over all available blocks from the
catalog, only to pass their ID to a dpu_hw_xxx_init() function which
uses an _xxx_offset() helper to search for and find the exact same
catalog pointer again to initialize the block with, fallible error
handling and all.

Instead, pass const pointers to the catalog entries directly to these
_init functions and drop the for loops entirely, saving on both
readability complexity and unnecessary cycles at boot.

Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/533861/
Link: https://lore.kernel.org/r/20230418-dpu-drop-useless-for-lookup-v3-3-e8d869eea455@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-05-22 10:14:16 +03:00
Marijn Suijten
94fdd55b93 drm/msm/dpu: Drop unused members from HW structs
Some of these members were initialized while never read, while others
were not even assigned any pointer value at all.  Drop them to save some
space, and above all confusion when looking at or accidentally
dereferencing these members.

Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/533862/
Link: https://lore.kernel.org/r/20230418-dpu-drop-useless-for-lookup-v3-2-e8d869eea455@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-05-22 10:14:16 +03:00
Dmitry Baryshkov
10036161ef drm/msm/dpu: stop mapping the regdma region
Stop mapping the regdma region. The driver does not support regdma.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/533150/
Link: https://lore.kernel.org/r/20230420222558.1208887-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-05-22 10:14:16 +03:00
Dmitry Baryshkov
078f766e16 drm/msm/dpu: drop the regdma configuration
The regdma is currently not used by the current driver. We have no way
to practically verify that the regdma is described correctly. Drop it
now.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/533148/
Link: https://lore.kernel.org/r/20230420222558.1208887-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-05-22 10:14:16 +03:00
Arnaud Vrac
8d6dad490a drm/msm/dpu: set max cursor width to 512x512
Override the default max cursor size reported to userspace of 64x64.
MSM8998 hw cursor planes support 512x512 size, and other chips use DMA
SSPPs.

Signed-off-by: Arnaud Vrac <avrac@freebox.fr>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/532903/
Link: https://lore.kernel.org/r/20230419-dpu-tweaks-v1-9-d1bac46db075@freebox.fr
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-05-22 10:14:16 +03:00
Arnaud Vrac
c95771905c drm/msm/dpu: fix cursor block register bit offset in msm8998 hw catalog
This matches the value for both fbdev and sde implementations in the
downstream msm-4.4 repository.

Signed-off-by: Arnaud Vrac <avrac@freebox.fr>
Fixes: 94391a14fc ("drm/msm/dpu1: Add MSM8998 to hw catalog")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/532899/
Link: https://lore.kernel.org/r/20230419-dpu-tweaks-v1-8-d1bac46db075@freebox.fr
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-05-22 10:14:16 +03:00
Arnaud Vrac
95a808328e drm/msm/dpu: use hsync/vsync polarity set by the encoder
Do not override the hsync/vsync polarity passed by the encoder when
setting up intf timings. The same logic was used in both the encoder and
intf code to set the DP and DSI polarities, so those interfaces are not
impacted. However for HDMI, the polarities were overriden to static
values based on the vertical resolution, instead of using the actual
mode polarities.

Signed-off-by: Arnaud Vrac <avrac@freebox.fr>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/532901/
Link: https://lore.kernel.org/r/20230419-dpu-tweaks-v1-3-d1bac46db075@freebox.fr
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-05-22 10:14:16 +03:00
Dmitry Baryshkov
e6f756af38 drm/msm/dpu: add HDMI output support
MSM8998 and the older Qualcomm platforms support HDMI outputs. Now as
DPU encoder is ready, add support for using INTF_HDMI.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Arnaud Vrac <rawoul@gmail.com>
Tested-by: Arnaud Vrac <rawoul@gmail.com> # on msm8998
Patchwork: https://patchwork.freedesktop.org/patch/532371/
Link: https://lore.kernel.org/r/20230415171926.85774-3-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-05-22 10:14:06 +03:00