Add a description for the Type-C silicon interface inside Qualcomm's
PM8150b hardware block.
Based on original work by Wesley.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20230508142308.1656410-6-bryan.odonoghue@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
From now, the Amlogic A1 USB controller is capable of switching between
host and gadget modes based on the status of the OTG_ID signal or via
manual USB role change.
Previously, only the Amlogic A1 IP version did not use OTG support for
host only mode, but this is no longer applicable.
Therefore, the 'otg_switch_supported' option can now be removed as
it is no longer required.
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20230511210455.6634-4-ddrokosov@sberdevices.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Provide the appropriate compatible string for the DWC2 IP that is found
inside the Amlogic A1 SoC and used in peripheral mode.
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20230511210455.6634-3-ddrokosov@sberdevices.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Amlogic A1 uses dwc2 Synopsys IP as its USB peripheral (gadget)
endpoint, with different DWC2 parameters when compared to previous
Amlogic SoCs.
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/20230511210455.6634-2-ddrokosov@sberdevices.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the event, gadget_connect call (which invokes pullup) fails,
propagate the error to udc bind operation which inturn sends the
error to configfs. The userspace can then retry enumeartion if
it chooses to.
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20230510075252.31023-3-quic_kriskura@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the core soft reset timeout happens, avoid setting up event
buffers and starting gadget as the writes to these registers
may not reflect when in reset and setting the run stop bit
can lead the controller to access wrong event buffer address
resulting in a crash.
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20230510075252.31023-2-quic_kriskura@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dwc2_driver_probe() calls dwc2_lowlevel_hw_init() which deassert some reset
lines.
Should an error happen in dwc2_lowlevel_hw_init() after calling
reset_control_deassert() or in the probe after calling
dwc2_lowlevel_hw_init(), the reset lines remain deasserted.
Add some devm_add_action_or_reset() calls to re-assert the lines if needed.
Update the remove function accordingly.
This change is compile-tested only.
Fixes: 83f8da562f ("usb: dwc2: Add reset control to dwc2")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/c64537b5339342bd00f7c2152b8fc23792b9f95a.1683306479.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In cases where the controller somehow fails to write to event buffer
memory (e.g. due to incorrect MMU config), the driver would receive
all-zero dwc3 events. However, the abnormal event is silently dropped
as a regular ep0out event.
Add error logs when an unknown endpoint event is received to highlight
the anomaly.
Signed-off-by: Roy Luo <royluo@google.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20230504000129.728316-1-royluo@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With faulty usb-storage devices, read/write can timeout, in that case
the SCSI layer will abort and re-issue the command. USB storage has no
internal timeout, it relies on SCSI layer aborting commands via
.eh_abort_handler() for non those responsive devices.
After two consecutive timeouts of the same command, SCSI layer calls
.eh_device_reset_handler(), without calling .eh_abort_handler() first.
With usb-storage, this causes a deadlock:
-> .eh_device_reset_handler
-> device_reset
-> mutex_lock(&(us->dev_mutex));
mutex already by usb_stor_control_thread(), which is waiting for
command completion:
-> usb_stor_control_thread (mutex taken here)
-> usb_stor_invoke_transport
-> usb_stor_Bulk_transport
-> usb_stor_bulk_srb
-> usb_stor_bulk_transfer_sglist
-> usb_sg_wait
Make sure we cancel any pending command in .eh_device_reset_handler()
to avoid this.
Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Cc: linux-usb@vger.kernel.org
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/all/ZEllnjMKT8ulZbJh@sakura/
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20230505114759.1189741-1-mbizon@freebox.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This was refactored recently and the "ret = " was accidentally deleted
so the errors aren't checked.
Fixes: 1d72fab476 ("USB: dwc3: refactor phy handling")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/d0c5a04f-deee-4ebe-9b0b-dc5492564519@kili.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We need to cancel the delayed workqueue if it is being used
else it will cause paging request fault during module removal.
Fixes: 0d6a119cec ("usb: typec: tps6598x: Add support for polling interrupts status")
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230421101720.34318-1-rogerq@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The CDC-ECM specification [1] requires to send the host MAC address as
an uppercase hexadecimal string in chapter "5.4 Ethernet Networking
Functional Descriptor":
The Unicode character is chosen from the set of values 30h through
39h and 41h through 46h (0-9 and A-F).
However, snprintf(.., "%pm", ..) generates a lowercase MAC address
string. While most host drivers are tolerant to this, UsbNcm.sys on
Windows 10 is not. Instead it uses a different MAC address with all
bytes set to zero including and after the first byte containing a
lowercase letter. On Windows 11 Microsoft fixed it, but apparently they
did not backport the fix.
This change fixes the issue by upper-casing the MAC to comply with the
specification.
[1]: https://www.usb.org/document-library/class-definitions-communication-devices-12, file ECM120.pdf
Fixes: bcd4a1c40b ("usb: gadget: u_ether: construct with default values and add setters/getters")
Cc: stable@vger.kernel.org
Signed-off-by: Konrad Gräfe <k.graefe@gateware.de>
Link: https://lore.kernel.org/r/20230505143640.443014-1-k.graefe@gateware.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Microchip usb5744 is a SS/HS USB 3.0 hub controller with 4 ports.
Add description for USB related aspects of the USB5744 hub, it as
well cover the option of connecting the controller as an i2c slave.
When i2c interface is connected hub needs to be initialized first.
Hub itself has fixed i2c address 0x2D but hardcoding address is not good
idea because address can be shifted by i2c address translator in the
middle.
Signed-off-by: Piyush Mehta <piyush.mehta@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/067fb163bfe3162c596a6c69c96c43ac78288628.1683895176.git.michal.simek@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit enables stream transfer protocol for Tegra XHCI.
Signed-off-by: Henry Lin <henryl@nvidia.com>
Signed-off-by: Jim Lin <jilin@nvidia.com>
Link: https://lore.kernel.org/r/20230512080423.27978-1-jilin@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove this log to avoid non-error conditions.
If CONFIG_USB_PHY is disabled, the following error message appears:
[ 0.231609] xhci-hcd f10f0000.usb3: xhci_plat_probe get usb3phy fail (ret=-6)
[ 0.239716] xhci-hcd f10f8000.usb3: xhci_plat_probe get usb3phy fail (ret=-6)
In this case, devm_usb_get_phy_by_phandle is declared static inline
and returns -ENXIO.
It is easy to pinpoint the failure to get the usb-phy using the debug
log in drivers/usb/phy/phy.c. Therefore, it can be removed.
Signed-off-by: Stanley Chang <stanley_chang@realtek.com>
Tested-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Link: https://lore.kernel.org/r/20230510075129.28047-1-stanley_chang@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the dwc3 device is runtime suspended, various required clocks are in
disabled state and it is not guaranteed that access to any registers would
work. Depending on the SoC glue, a register read could be as benign as
returning 0 or be fatal enough to hang the system.
In order to prevent such scenarios of fatal errors, make sure to resume
dwc3 then allow the function to proceed.
Fixes: 72246da40f ("usb: Introduce DesignWare USB3 DRD Driver")
Cc: stable@vger.kernel.org #3.2: 30332eeefe: debugfs: regset32: Add Runtime PM support
Signed-off-by: Udipto Goswami <quic_ugoswami@quicinc.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20230509144836.6803-1-quic_ugoswami@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
OverCurrent condition is not standardized in the UHCI spec.
Zhaoxin UHCI controllers report OverCurrent bit active off.
In order to handle OverCurrent condition correctly, the uhci-hcd
driver needs to be told to expect the active-off behavior.
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Weitao Wang <WeitaoWang-oc@zhaoxin.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20230423105952.4526-1-WeitaoWang-oc@zhaoxin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Realtek RTD SoCs were designed with the global register address
offset at 0x8100. The default address offset is constant at
DWC3_GLOBALS_REGS_START (0xc100). Therefore, add a check if the
compatible name of the parent is realtek,rtd-dwc3, then global
register start address will remap to 0x8100.
Signed-off-by: Stanley Chang <stanley_chang@realtek.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20230505025104.18321-1-stanley_chang@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Avoid extra 120ms delay during system resume.
The xHC controller may signal wake up to 120ms before showing which usb
device caused the wake on the xHC port registers.
The xhci driver therefore checks for port activity up to 120ms during
resume, making sure that the hub driver can see the port change, and
won't immediately runtime suspend back due to no port activity.
This is however only needed for runtime resume as system resume will
resume all child hubs and other child usb devices anyway.
Fixes: 253f588c70 ("xhci: Improve detection of device initiated wake signal.")
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20230428140056.1318981-3-Basavaraj.Natikar@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, the pci_resume method has only a flag indicating whether the
system is resuming from hibernation. In order to handle all PM events like
AUTO_RESUME (runtime resume from device in D3), RESUME (system resume from
s2idle, S3 or S4 states) etc change the pci_resume method to handle all PM
events.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20230428140056.1318981-2-Basavaraj.Natikar@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When work in gadget mode, currently driver doesn't update software level
link_state correctly as link state change event is not enabled for most
devices, in function dwc3_gadget_suspend_interrupt(), it will only pass
suspend event to UDC core when software level link state changes, so when
interrupt generated in sequences of suspend -> reset -> conndone ->
suspend, link state is not updated during reset and conndone, so second
suspend interrupt event will not pass to UDC core.
Remove link_state compare in dwc3_gadget_suspend_interrupt() and add a
suspended flag to replace the compare function.
Fixes: 799e9dc829 ("usb: dwc3: gadget: conditionally disable Link State change events")
Cc: stable <stable@kernel.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com>
Link: https://lore.kernel.org/r/20230512004524.31950-1-quic_linyyuan@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Prevent -ETIMEDOUT error on .suspend().
e.g. If gadget driver is loaded and we are connected to a USB host,
all transfers must be stopped before stopping the controller else
we will not get a clean stop i.e. dwc3_gadget_run_stop() will take
several seconds to complete and will return -ETIMEDOUT.
Handle error cases properly in dwc3_gadget_suspend().
Simplify dwc3_gadget_resume() by using the introduced helper function.
Fixes: 9f8a67b65a ("usb: dwc3: gadget: fix gadget suspend/resume")
Cc: stable@vger.kernel.org
Suggested-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20230503110048.30617-1-rogerq@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a return to the error path when cxl_cdat_read_table() fails. Current
code continues with the table pointer points to freed memory.
Fixes: 7a877c9239 ("cxl/pci: Simplify CDAT retrieval error path")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/168382793506.3510737.4792518576623749076.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In dvb_demux.c, some logics exist which compare the expected
continuity counter and the real continuity counter. If they
are not matched each other, both of the expected continuity
counter and the real continuity counter should be printed.
But there exists a bug that the expected continuity counter
is not correctly printed. The expected continuity counter is
replaced with the real countinuity counter + 1 so that
the epected continuity counter is not correclty printed.
This is wrong. This bug is fixed.
Link: https://lore.kernel.org/linux-media/20230305212519.499-1-yongsuyoo0215@gmail.com
Signed-off-by: YongSu Yoo <yongsuyoo0215@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Now that DVB_CORE can be a loadable module, pvrusb2 can run into
a link error:
ld.lld: error: undefined symbol: dvb_module_probe
>>> referenced by pvrusb2-devattr.c
>>> drivers/media/usb/pvrusb2/pvrusb2-devattr.o:(pvr2_lgdt3306a_attach) in archive vmlinux.a
ld.lld: error: undefined symbol: dvb_module_release
>>> referenced by pvrusb2-devattr.c
>>> drivers/media/usb/pvrusb2/pvrusb2-devattr.o:(pvr2_dual_fe_attach) in archive vmlinux.a
Refine the Kconfig dependencies to avoid this case.
Link: https://lore.kernel.org/linux-media/20230117171055.2714621-1-arnd@kernel.org
Fixes: 7655c342db ("media: Kconfig: Make DVB_CORE=m possible when MEDIA_SUPPORT=y")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Starting with commit:
95433f7263 ("srcu: Begin offloading srcu_struct fields to srcu_update")
...it is no longer possible to do:
static DEFINE_SRCU(x)
Switch to DEFINE_STATIC_SRCU(x) to fix:
tools/testing/cxl/test/mock.c:22:1: error: duplicate ‘static’
22 | static DEFINE_SRCU(cxl_mock_srcu);
| ^~~~~~
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/168392709546.1135523.10424917245934547117.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The DSA framework has got more picky about always having a phy-mode
for the CPU port. The imx8mq Ethernet is being configured to RMII. Set
the switch phy-mode based on this.
Additionally, the cpu label has never actually been used in the
binding, so remove it.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The DSA framework has got more picky about always having a phy-mode
for the CPU port. Add a phy-mode based on what the SoC ethernet is
using. For RGMII mode, have the switch add the delays.
Additionally, the cpu label has never actually been used in the
binding, so remove it.
Lastly add a fixed-link node indicating the expected speed/duplex of
the link to the SoC.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The DSA framework has got more picky about always having a phy-mode
for the CPU port. The imx51 Ethernet supports MII, and RMII. Set the
switch phy-mode based on how the SoC Ethernet port has been
configured.
Additionally, the cpu label has never actually been used in the
binding, so remove it.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
As stated in Documentation/devicetree/bindings/spi/spi-gpio.yaml,
'gpio-miso', 'gpio-mosi' and 'gpio-sck' are deprecated properties.
Use the recommeded 'miso-gpios', 'mosi-gpios' and 'sck-gpios' instead.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
As stated in Documentation/devicetree/bindings/spi/spi-gpio.yaml,
'gpio-miso', 'gpio-mosi' and 'gpio-sck' are deprecated properties.
Use the recommeded 'miso-gpios', 'mosi-gpios' and 'sck-gpios' instead.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
As stated in Documentation/devicetree/bindings/spi/spi-gpio.yaml,
'gpio-miso', 'gpio-mosi' and 'gpio-sck' are deprecated properties.
Use the recommeded 'miso-gpios', 'mosi-gpios' and 'sck-gpios' instead.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
As stated in Documentation/devicetree/bindings/spi/spi-gpio.yaml,
'gpio-miso', 'gpio-mosi' and 'gpio-sck' are deprecated properties.
Use the recommeded 'miso-gpios', 'mosi-gpios' and 'sck-gpios' instead.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
As stated in Documentation/devicetree/bindings/spi/spi-gpio.yaml,
'gpio-miso', 'gpio-mosi' and 'gpio-sck' are deprecated properties.
Use the recommeded 'miso-gpios', 'mosi-gpios' and 'sck-gpios' instead.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
As stated in Documentation/devicetree/bindings/spi/spi-gpio.yaml,
'gpio-mosi' and 'gpio-sck' are deprecated properties.
Use the recommeded 'mosi-gpios' and 'sck-gpios' instead.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
As stated in Documentation/devicetree/bindings/spi/spi-gpio.yaml,
'gpio-mosi' and 'gpio-sck' are deprecated properties.
Use the recommeded 'mosi-gpios' and 'sck-gpios' instead.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add support for Marantec maveo box. The system is used to get a
smart conntection to a door drive. It has USB, WiFi, Bluetooth,
Zigbee and NFC interfaces. The core of this system is a soldered
i.MX6ULL DHCOR SoM from DH electronics.
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
To be able to define mmc aliases correctly for a DHCOR board
remove mmc aliases from the DHCOR SoM layer.
All DHCOM SoM boards are based on the DHCOR SoM, as the DHCOR
SoM is soldered on top of the DHCOM SoM. As a result, remove
the mmc /delete-property/ entries from the aliases node in
the DHCOM SoM layer, because this is already removed in the
DHCOR SoM layer below.
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add Marantec maveo box. The system is used to get a smart conntection
to a door drive. The core of this system is a soldered i.MX6ULL DHCOR
SoM from DH electronics.
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
SYM_FUNC_START_LOCAL_NOALIGN() adds an endbr leading to this layout
(leaving only the last 2 bytes of the address):
3bff <zen_untrain_ret>:
3bff: f3 0f 1e fa endbr64
3c03: f6 test $0xcc,%bl
3c04 <__x86_return_thunk>:
3c04: c3 ret
3c05: cc int3
3c06: 0f ae e8 lfence
However, "the RET at __x86_return_thunk must be on a 64 byte boundary,
for alignment within the BTB."
Use SYM_START instead.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=uWUN
-----END PGP SIGNATURE-----
Merge tag 'for-6.4-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull more btrfs fixes from David Sterba:
- fix incorrect number of bitmap entries for space cache if loading is
interrupted by some error
- fix backref walking, this breaks a mode of LOGICAL_INO_V2 ioctl that
is used in deduplication tools
- zoned mode fixes:
- properly finish zone reserved for relocation
- correctly calculate super block zone end on ZNS
- properly initialize new extent buffer for redirty
- make mount option clear_cache work with block-group-tree, to rebuild
free-space-tree instead of temporarily disabling it that would lead
to a forced read-only mount
- fix alignment check for offset when printing extent item
* tag 'for-6.4-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: make clear_cache mount option to rebuild FST without disabling it
btrfs: zero the buffer before marking it dirty in btrfs_redirty_list_add
btrfs: zoned: fix full zone super block reading on ZNS
btrfs: zoned: zone finish data relocation BG with last IO
btrfs: fix backref walking not returning all inode refs
btrfs: fix space cache inconsistency after error loading it from disk
btrfs: print-tree: parent bytenr must be aligned to sector size
-----BEGIN PGP SIGNATURE-----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=ax5r
-----END PGP SIGNATURE-----
Merge tag '6.4-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs client fixes from Steve French:
- fix for copy_file_range bug for very large files that are multiples
of rsize
- do not ignore "isolated transport" flag if set on share
- set rasize default better
- three fixes related to shutdown and freezing (fixes 4 xfstests, and
closes deferred handles faster in some places that were missed)
* tag '6.4-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: release leases for deferred close handles when freezing
smb3: fix problem remounting a share after shutdown
SMB3: force unmount was failing to close deferred close files
smb3: improve parallel reads of large files
do not reuse connection if share marked as isolated
cifs: fix pcchunk length type in smb2_copychunk_range
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZF5YpQAKCRCRxhvAZXjc
oqZpAQCuXA/XDf4Cyhfk87C0gbzy1Akjf3Xpia8q1mWtvN4I+AD+PE54krWgxGRi
mu5Ae2X95tQ1v+MUAcmWOMdITK8HewE=
=8+GL
-----END PGP SIGNATURE-----
Merge tag 'vfs/v6.4-rc1/pipe' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fix from Christian Brauner:
"During the pipe nonblock rework the check for both O_NONBLOCK and
IOCB_NOWAIT was dropped. Both checks need to be performed to ensure
that files without O_NONBLOCK but IOCB_NOWAIT don't block when writing
to or reading from a pipe.
This just contains the fix adding the check for IOCB_NOWAIT back in"
* tag 'vfs/v6.4-rc1/pipe' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs:
pipe: check for IOCB_NOWAIT alongside O_NONBLOCK
-----BEGIN PGP SIGNATURE-----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=C+lE
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.4-2023-05-12' of git://git.kernel.dk/linux
Pull io_uring fix from Jens Axboe:
"Just a single fix making io_uring_sqe_cmd() available regardless of
CONFIG_IO_URING, fixing a regression introduced during the merge
window if nvme was selected but io_uring was not"
* tag 'io_uring-6.4-2023-05-12' of git://git.kernel.dk/linux:
io_uring: make io_uring_sqe_cmd() unconditionally available
* A fix to the linker script to avoid orpahaned sections in kernel/pi.
-----BEGIN PGP SIGNATURE-----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=Hjh9
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fix from Palmer Dabbelt:
"Just a single fix this week for a build issue. That'd usually be a
good sign, but we've started to get some reports of boot failures on
some hardware/bootloader configurations. Nothing concrete yet, but
I've got a funny feeling that's where much of the bug hunting is going
right now.
Nothing's reproducing on my end, though, and this fixes some pretty
concrete issues so I figured there's no reason to delay it:
- a fix to the linker script to avoid orpahaned sections in
kernel/pi"
* tag 'riscv-for-linus-6.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fix orphan section warnings caused by kernel/pi