Convert the RT5682S to use GPIO descriptors and drop the
legacy GPIO headers.
We remove the global GPIO number from the platform data,
but it is still possible to create board files using GPIO
descriptor tables, if desired.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230817-descriptors-asoc-rt-v2-5-02fa2ca3e5b0@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the RT5682 to use GPIO descriptors and drop the
legacy GPIO headers.
We remove the global GPIO number from the platform data,
but it is still possible to create board files using GPIO
descriptor tables, if desired.
Make sure to make sure SDW devices can associate with
an LDO1 EN descriptor too, if they so desire by putting
the lookup into the common code.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230817-descriptors-asoc-rt-v2-4-02fa2ca3e5b0@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the RT5668 to use GPIO descriptors and drop the
legacy GPIO headers.
We remove the global GPIO number from the platform data,
but it is still possible to create board files using GPIO
descriptor tables, if desired.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230817-descriptors-asoc-rt-v2-3-02fa2ca3e5b0@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The RT5665 driver has some stub support for GPIO descriptors
going back to the initial driver commit, where there are
two GPIO descriptors for the LDO and headphone detection
defined in the device state. Well, let's make use of the
descriptor properly.
We remove the global GPIO number from the platform data,
but it is still possible to create board files using GPIO
descriptor tables, if desired.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230817-descriptors-asoc-rt-v2-2-02fa2ca3e5b0@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The RT5640 driver is already using GPIO descriptors for some
stuff, all that is needed is to convert the remaining LDO1
control line to also use descriptors.
Simplify the code using gpiod_get_optional() and drop the
special "of" parsing function: these descriptors need not
come from device tree and it's optional so hey.
Keep some NULL checks around the GPIO operations even though
gpiolib is essentially NULL-tolerant, because by checking
for whether we have a valid GPIO descriptor or not we can
avoid a 400 ms delay which is great.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230817-descriptors-asoc-rt-v2-1-02fa2ca3e5b0@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Be more careful when tearing down the subrequests of an O_DIRECT write
as part of a retransmission.
Reported-by: Chris Mason <clm@fb.com>
Fixes: ed5d588fe4 ("NFS: Try to join page groups before an O_DIRECT retransmission")
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Pausing and canceling balance can race to interrupt balance lead to BUG_ON
panic in btrfs_cancel_balance. The BUG_ON condition in btrfs_cancel_balance
does not take this race scenario into account.
However, the race condition has no other side effects. We can fix that.
Reproducing it with panic trace like this:
kernel BUG at fs/btrfs/volumes.c:4618!
RIP: 0010:btrfs_cancel_balance+0x5cf/0x6a0
Call Trace:
<TASK>
? do_nanosleep+0x60/0x120
? hrtimer_nanosleep+0xb7/0x1a0
? sched_core_clone_cookie+0x70/0x70
btrfs_ioctl_balance_ctl+0x55/0x70
btrfs_ioctl+0xa46/0xd20
__x64_sys_ioctl+0x7d/0xa0
do_syscall_64+0x38/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Race scenario as follows:
> mutex_unlock(&fs_info->balance_mutex);
> --------------------
> .......issue pause and cancel req in another thread
> --------------------
> ret = __btrfs_balance(fs_info);
>
> mutex_lock(&fs_info->balance_mutex);
> if (ret == -ECANCELED && atomic_read(&fs_info->balance_pause_req)) {
> btrfs_info(fs_info, "balance: paused");
> btrfs_exclop_balance(fs_info, BTRFS_EXCLOP_BALANCE_PAUSED);
> }
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: xiaoshoukui <xiaoshoukui@ruijie.com.cn>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
bio_ctrl->len_to_oe_boundary is used to make sure we stay inside a zone
as we submit bios for writes. Every time we add a page to the bio, we
decrement those bytes from len_to_oe_boundary, and then we submit the
bio if we happen to hit zero.
Most of the time, len_to_oe_boundary gets set to U32_MAX.
submit_extent_page() adds pages into our bio, and the size of the bio
ends up limited by:
- Are we contiguous on disk?
- Does bio_add_page() allow us to stuff more in?
- is len_to_oe_boundary > 0?
The len_to_oe_boundary math starts with U32_MAX, which isn't page or
sector aligned, and subtracts from it until it hits zero. In the
non-zoned case, the last IO we submit before we hit zero is going to be
unaligned, triggering BUGs.
This is hard to trigger because bio_add_page() isn't going to make a bio
of U32_MAX size unless you give it a perfect set of pages and fully
contiguous extents on disk. We can hit it pretty reliably while making
large swapfiles during provisioning because the machine is freshly
booted, mostly idle, and the disk is freshly formatted. It's also
possible to trigger with reads when read_ahead_kb is set to 4GB.
The code has been clean up and shifted around a few times, but this flaw
has been lurking since the counter was added. I think the commit
24e6c80822 ("btrfs: simplify main loop in submit_extent_page") ended
up exposing the bug.
The fix used here is to skip doing math on len_to_oe_boundary unless
we've changed it from the default U32_MAX value. bio_add_page() is the
real limit we want, and there's no reason to do extra math when block
layer is doing it for us.
Sample reproducer, note you'll need to change the path to the bdi and
device:
SUBVOL=/btrfs/swapvol
SWAPFILE=$SUBVOL/swapfile
SZMB=8192
mkfs.btrfs -f /dev/vdb
mount /dev/vdb /btrfs
btrfs subvol create $SUBVOL
chattr +C $SUBVOL
dd if=/dev/zero of=$SWAPFILE bs=1M count=$SZMB
sync
echo 4 > /proc/sys/vm/drop_caches
echo 4194304 > /sys/class/bdi/btrfs-2/read_ahead_kb
while true; do
echo 1 > /proc/sys/vm/drop_caches
echo 1 > /proc/sys/vm/drop_caches
dd of=/dev/zero if=$SWAPFILE bs=4096M count=2 iflag=fullblock
done
Fixes: 24e6c80822 ("btrfs: simplify main loop in submit_extent_page")
CC: stable@vger.kernel.org # 6.4+
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Fstests with POST_MKFS_CMD="btrfstune -m" (as in the mailing list)
reported a few of the test cases failing.
The failure scenario can be summarized and simplified as follows:
$ mkfs.btrfs -fq -draid1 -mraid1 /dev/sdb1 /dev/sdb2 :0
$ btrfstune -m /dev/sdb1 :0
$ wipefs -a /dev/sdb1 :0
$ mount -o degraded /dev/sdb2 /btrfs :0
$ btrfs replace start -B -f -r 1 /dev/sdb1 /btrfs :1
STDERR:
ERROR: ioctl(DEV_REPLACE_START) failed on "/btrfs": Input/output error
[11290.583502] BTRFS warning (device sdb2): tree block 22036480 mirror 2 has bad fsid, has 99835c32-49f0-4668-9e66-dc277a96b4a6 want da40350c-33ac-4872-92a8-4948ed8c04d0
[11290.586580] BTRFS error (device sdb2): unable to fix up (regular) error at logical 22020096 on dev /dev/sdb8 physical 1048576
As above, the replace is failing because we are verifying the header with
fs_devices::fsid instead of fs_devices::metadata_uuid, despite the
metadata_uuid actually being present.
To fix this, use fs_devices::metadata_uuid. We copy fsid into
fs_devices::metadata_uuid if there is no metadata_uuid, so its fine.
Fixes: a3ddbaebc7 ("btrfs: scrub: introduce a helper to verify one metadata block")
CC: stable@vger.kernel.org # 6.4+
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 'fa6999e326 ("s390/pkey: support CCA and EP11 secure ECC
private keys")' introduced PKEY_TYPE_EP11_AES securekey blobs as a
supplement to the PKEY_TYPE_EP11 (which won't work in environments
with session-bound keys). This new keyblobs has a different maximum
size, so fix paes crypto module to accept also these larger keyblobs.
Fixes: fa6999e326 ("s390/pkey: support CCA and EP11 secure ECC private keys")
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Commit 'fa6999e326 ("s390/pkey: support CCA and EP11 secure ECC
private keys")' introduced a new PKEY_TYPE_EP11_AES securekey type as
a supplement to the existing PKEY_TYPE_EP11 (which won't work in
environments with session-bound keys). The pkey EP11 securekey
attributes use PKEY_TYPE_EP11_AES (instead of PKEY_TYPE_EP11)
keyblobs, to make the generated keyblobs usable also in environments,
where session-bound keys are required.
There should be no negative impacts to userspace because the internal
structure of the keyblobs is opaque. The increased size of the
generated keyblobs is reflected by the changed size of the attributes.
Fixes: fa6999e326 ("s390/pkey: support CCA and EP11 secure ECC private keys")
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Commit 'fa6999e326 ("s390/pkey: support CCA and EP11 secure ECC
private keys")' introduced a new PKEY_TYPE_EP11_AES type for the
PKEY_VERIFYKEY2 IOCTL to verify keyblobs of this type. Unfortunately,
all PKEY_VERIFYKEY2 IOCTL requests with keyblobs of this type return
with an error (-EINVAL). Fix PKEY_TYPE_EP11_AES handling in
PKEY_VERIFYKEY2 IOCTL, so that userspace can verify keyblobs of this
type.
Fixes: fa6999e326 ("s390/pkey: support CCA and EP11 secure ECC private keys")
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Commit 'fa6999e326 ("s390/pkey: support CCA and EP11 secure ECC
private keys")' introduced a new PKEY_TYPE_EP11_AES type for the
PKEY_KBLOB2PROTK2 and a new IOCTL, PKEY_KBLOB2PROTK3, which both
allows userspace to convert opaque securekey blobs of this type into
protectedkey blobs. Unfortunately, all PKEY_KBLOB2PROTK2 and
PKEY_KBLOB2PROTK3 IOCTL requests with this keyblobs of this type
return with an error (-EINVAL). Fix PKEY_TYPE_EP11_AES handling in
PKEY_KBLOB2PROTK2 and PKEY_KBLOB2PROTK3 IOCTLs, so that userspace can
convert PKEY_TYPE_EP11_AES keyblobs into protectedkey blobs.
Add a helper function to decode the start and size of the internal
header as well as start and size of the keyblob payload of an existing
keyblob. Also validate the length of header and keyblob, as well as
the keyblob magic.
Introduce another helper function, which handles a raw key wrapping
request and do the keyblob decoding in the calling function. Remove
all other header-related calculations.
Fixes: fa6999e326 ("s390/pkey: support CCA and EP11 secure ECC private keys")
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Commit 'fa6999e326 ("s390/pkey: support CCA and EP11 secure ECC
private keys")' introduced PKEY_TYPE_EP11_AES for the PKEY_CLR2SECK2
IOCTL to convert an AES clearkey into a securekey of this type.
Unfortunately, all PKEY_CLR2SECK2 IOCTL requests with type
PKEY_TYPE_EP11_AES return with an error (-EINVAL). Fix the handling
for PKEY_TYPE_EP11_AES in PKEY_CLR2SECK2 IOCTL, so that userspace can
convert clearkey blobs into PKEY_TYPE_EP11_AES securekey blobs.
Cc: stable@vger.kernel.org # v5.10+
Fixes: fa6999e326 ("s390/pkey: support CCA and EP11 secure ECC private keys")
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Commit 'fa6999e326 ("s390/pkey: support CCA and EP11 secure ECC
private keys")' introduced PKEY_TYPE_EP11_AES for the PKEY_GENSECK2
IOCTL, to enable userspace to generate securekey blobs of this
type. Unfortunately, all PKEY_GENSECK2 IOCTL requests for
PKEY_TYPE_EP11_AES return with an error (-EINVAL). Fix the handling
for PKEY_TYPE_EP11_AES in PKEY_GENSECK2 IOCTL, so that userspace can
generate securekey blobs of this type.
The start of the header and the keyblob, as well as the length need
special handling, depending on the internal keyversion. Add a helper
function that splits an uninitialized buffer into start and size of
the header as well as start and size of the payload, depending on the
requested keyversion.
Do the header-related calculations and the raw genkey request handling
in separate functions. Use the raw genkey request function for
internal purposes.
Fixes: fa6999e326 ("s390/pkey: support CCA and EP11 secure ECC private keys")
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Commit 'fa6999e326 ("s390/pkey: support CCA and EP11 secure ECC
private keys")' introduced PKEY_TYPE_EP11_AES as a supplement to
PKEY_TYPE_EP11. All pkeys have an internal header/payload structure,
which is opaque to the userspace. The header structures for
PKEY_TYPE_EP11 and PKEY_TYPE_EP11_AES are nearly identical and there
is no reason, why different structures are used. In preparation to fix
the keyversion handling in the broken PKEY IOCTLs, the same header
structure is used for PKEY_TYPE_EP11 and PKEY_TYPE_EP11_AES. This
reduces the number of different code paths and increases the
readability.
Fixes: fa6999e326 ("s390/pkey: support CCA and EP11 secure ECC private keys")
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Unifying the asm-generic headers across 32-bit and 64-bit architectures
based on the compiler provided macros was a good idea and appears to work
with all user space, but it caused a regression when building old kernels
on systems that have the new headers installed in /usr/include, as this
combination trips an inconsistency in the kernel's own tools/include
headers that are a mix of userspace and kernel-internal headers.
This affects kernel builds on arm64, riscv64 and loongarch64 systems that
might end up using the "#define __BITS_PER_LONG 32" default from the old
tools headers. Backporting the commit into stable kernels would address
this, but it would still break building kernels without that backport,
and waste time for developers trying to understand the problem.
arm64 build machines are rather common, and on riscv64 this can also
happen in practice, but loongarch64 is probably new enough to not
be used much for building old kernels, so only revert the bits
for arm64 and riscv.
Link: https://lore.kernel.org/all/20230731160402.GB1823389@dev-arch.thelio-3990X/
Reported-by: Nathan Chancellor <nathan@kernel.org>
Fixes: 8386f58f8d ("asm-generic: Unify uapi bitsperlong.h for arm64, riscv and loongarch")
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This corrects the invalid path specifier for L3 interconnects in the CPU
nodes of SM8150 and SM8250. It corrects the compatible of the SC8180X L3
node, to pass the binding check.
The crypto core, and its DMA controller, is disabled on SM8350 to avoid
the system from crashing at boot while the issue is diagnosed.
A thermal zone node name conflict is resolved for PM8150L, on the RB5
board.
The UFS vccq voltage is corrected on the SA877P Ride platform, to
address observed stability issues.
The reg-names of the DSI phy on SC7180 are restored after an accidental
search-and-replace update.
-----BEGIN PGP SIGNATURE-----
iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmTbiYoVHGFuZGVyc3Nv
bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FeCkQAJuHrH8Bb1954UR4yba3P7h4kmLQ
xWgDzQXfTT6cl9MHmq/8RwoIhGABAbr3HNX0qwVNVNgn+w90LtVFSSL0SqKczkQk
euwtJf+T2NKqFJnRisx2O78WhPYxw52d6rs+v2gw2AoWATX6zRdXpcHch37bUv+/
jBRNdas9wttrkxuOtJ7TD4G42KlIrM+6YukDWCtdwpLhBkKZwqu/UuEa8jwWyV8b
cY9edRqo4P2nem0Nt5PmCGwFdHSBKR7wqDGMkwYP9tlziHfe6WTtQNYM+J7ZRMzg
tslny8xIXZvo2xy2fwB8JGYD/rhQY3D16wL72mPFxOZelokdU1esX6pURw4JIyiB
gHFDWEfEWXXbYzV+QDrxdbm28jgUTZinzDiRkkbxoPsA8roBmN9XHHlxm+/I4Yoj
Vm1ymH1KUDOidkKlM1lfuTaXNxFGZ3xTtHweXD72d+uN+woUwcSM9N/FLugPq0Fb
rng9FwxpOmr3Wc4NaIneRNOYA57+KaSY1OgMp5X+e9pAkjKoPKqOEPokgWUhqmAG
PW+P3VJpwqT9xpaidN15Eyb/dIwtPa6IsRkK70l8DRLhLIwl8Zdbch+bV4AjTc7R
fyxkuazL3Y+G7ddEvRXvgo6i0e1w8TTjn11D2NLn9yINZJhr6JqGbuS1F4dzYmUD
Zc7WroVo89eep9Wh
=ZesT
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=VxVu
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-fixes-for-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm ARM64 fixes for v6.5
This corrects the invalid path specifier for L3 interconnects in the CPU
nodes of SM8150 and SM8250. It corrects the compatible of the SC8180X L3
node, to pass the binding check.
The crypto core, and its DMA controller, is disabled on SM8350 to avoid
the system from crashing at boot while the issue is diagnosed.
A thermal zone node name conflict is resolved for PM8150L, on the RB5
board.
The UFS vccq voltage is corrected on the SA877P Ride platform, to
address observed stability issues.
The reg-names of the DSI phy on SC7180 are restored after an accidental
search-and-replace update.
* tag 'qcom-arm64-fixes-for-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: sc7180: Fix DSI0_PHY reg-names
arm64: dts: qcom: sa8775p-ride: Update L4C parameters
arm64: dts: qcom: qrb5165-rb5: fix thermal zone conflict
arm64: dts: qcom: sm8350: fix BAM DMA crash and reboot
arm64: dts: qcom: sc8180x: Fix OSM L3 compatible
arm64: dts: qcom: sm8250: Fix EPSS L3 interconnect cells
arm64: dts: qcom: sm8150: Fix OSM L3 interconnect cells
Link: https://lore.kernel.org/r/20230815142042.2459048-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A fix external abort on non-linefetch for am335x that is fixed with a flush
of posted write. And two networking fixes for beaglebone mostly for revision
c3 to do phy reset with a gpio and to fix a boot time warning.
-----BEGIN PGP SIGNATURE-----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=OJ1M
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=1dGT
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v6.5/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omaps
A fix external abort on non-linefetch for am335x that is fixed with a flush
of posted write. And two networking fixes for beaglebone mostly for revision
c3 to do phy reset with a gpio and to fix a boot time warning.
* tag 'omap-for-v6.5/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am335x-bone-common: Add vcc-supply for on-board eeprom
ARM: dts: am335x-bone-common: Add GPIO PHY reset on revision C3 board
bus: ti-sysc: Flush posted write on enable before reset
Link: https://lore.kernel.org/r/pull-1692158536-457318@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The driver depends on CONFIG_OF, so it is not necessary to use
of_match_ptr() here. We remove both CONFIG_OF and of_match_ptr() here.
Signed-off-by: Zhu Wang <wangzhu9@huawei.com>
Link: https://lore.kernel.org/r/20230808111108.24262-1-wangzhu9@huawei.com
Signed-off-by: Lee Jones <lee@kernel.org>
disabled hs400 speeds for some boards having problems with data
intergrity and some dt property/styling fixes.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmTdQagQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdga3AB/sFuePDO2RZcM4YAf5IB/Ct5nFgdaVEOvNk
UxB60rD7nsVuTblc3FT9K6TRgGJfX3VKylDUWoSHlkbjoof0Hu8GJ/5dhiNM5dxc
GRwTzobweVez3d6CWI78EMbEBa/phHSEFdEy5Dk0npolt91tBzOn1BqZTi3/CLY3
56cPcBArLqlEWE7ExhNXHbrJ+WCblgjulabVm9aYjSeU8iOHHxnq+Z82M+DDIP2Q
3I2rsyFqgHYOAsYaBGOyVnEzJiEVEOp/1+4bvlawmWLRj1s48bjn7aWUBaawLd1c
NMcPRWFRKEDqyP28wxL45Kr8mWZ/97lQ4DY/MsyKtJFF7zj9CPIM
=gBGI
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=yaB5
-----END PGP SIGNATURE-----
Merge tag 'v6.5-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
Correct wifi interrupt flags for some boards, fixed wifi on Rock PI4,
disabled hs400 speeds for some boards having problems with data
intergrity and some dt property/styling fixes.
* tag 'v6.5-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Fix Wifi/Bluetooth on ROCK Pi 4 boards
arm64: dts: rockchip: minor whitespace cleanup around '='
arm64: dts: rockchip: Disable HS400 for eMMC on ROCK 4C+
arm64: dts: rockchip: Disable HS400 for eMMC on ROCK Pi 4
arm64: dts: rockchip: add missing space before { on indiedroid nova
arm64: dts: rockchip: correct wifi interrupt flag in Box Demo
arm64: dts: rockchip: correct wifi interrupt flag in Rock Pi 4B
arm64: dts: rockchip: correct wifi interrupt flag in eaidk-610
arm64: dts: rockchip: Drop invalid regulator-init-microvolt property
Link: https://lore.kernel.org/r/4519945.8hzESeGDPO@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add mt7986 audio afe document.
Signed-off-by: Maso Huang <maso.huang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230817101338.18782-7-maso.huang@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add document for mt7986 board with wm8960.
Signed-off-by: Maso Huang <maso.huang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230817101338.18782-6-maso.huang@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for mt7986 board with wm8960.
Signed-off-by: Maso Huang <maso.huang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230817101338.18782-5-maso.huang@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add mt7986 etdm dai driver support.
Signed-off-by: Maso Huang <maso.huang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230817101338.18782-3-maso.huang@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add header files for register definition and structure.
Signed-off-by: Maso Huang <maso.huang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230817101338.18782-2-maso.huang@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
fixed register access error when switching to other tas2781 -- refresh the page
inside regmap on the switched tas2781
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://lore.kernel.org/r/20230817093257.951-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
An ACPI ID has been allocated for CS35L56 ASoC devices so that they can
be instantiated from ACPI Device entries.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230817112712.16637-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use a device property "cirrus,firmware-uid" to get the unique firmware
identifier instead of using ACPI _SUB. There aren't any products that use
_SUB.
There will not usually be a _SUB in Soundwire nodes. The ACPI can use a
_DSD section for custom properties.
There is also a need to support instantiating this driver using software
nodes. This is for systems where the CS35L56 is a back-end device and the
ACPI refers only to the front-end audio device - there will not be any ACPI
references to CS35L56.
Fixes: e496112529 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230817112712.16637-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This is a gpio-controller, so gpio-line-names should be allowed as well.
pca9532 supports up to 16 GPIOs.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230724063520.182888-2-alexander.stein@ew.tq-group.com
Signed-off-by: Lee Jones <lee@kernel.org>
Christian reported spurious module load crashes after some of Song's
module memory layout patches.
Turns out that if the very last instruction on the very last page of the
module is a 'JMP __x86_return_thunk' then __static_call_fixup() will
trip a fault and die.
And while the module rework made this slightly more likely to happen,
it's always been possible.
Fixes: ee88d363d1 ("x86,static_call: Use alternative RET encoding")
Reported-by: Christian Bricart <christian@bricart.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lkml.kernel.org/r/20230816104419.GA982867@hirez.programming.kicks-ass.net
The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface
(Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed
for portable applications. It provides a high dynamic range, stereo
DAC for headphone output, two integrated Class D amplifiers for
loudspeakers, and two ADCs for wired headset microphone input or
stereo line input. PDM inputs are provided for digital microphones.
Add a basic pinctrl driver which supports driver strength for the
various pins, gpios, and pinmux for the 2 multi-function pins.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230804104602.395892-5-ckeepax@opensource.cirrus.com
Signed-off-by: Lee Jones <lee@kernel.org>
The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface
(Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed
for portable applications. It provides a high dynamic range, stereo
DAC for headphone output, two integrated Class D amplifiers for
loudspeakers, and two ADCs for wired headset microphone input or
stereo line input. PDM inputs are provided for digital microphones.
The MFD component registers and initialises the device and provides
PM/system power management.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230804104602.395892-4-ckeepax@opensource.cirrus.com
Signed-off-by: Lee Jones <lee@kernel.org>
The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface
(Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed
for portable applications. It provides a high dynamic range, stereo
DAC for headphone output, two integrated Class D amplifiers for
loudspeakers, and two ADCs for wired headset microphone input or
stereo line input. PDM inputs are provided for digital microphones.
Add a YAML DT binding document for this device.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230804104602.395892-3-ckeepax@opensource.cirrus.com
Signed-off-by: Lee Jones <lee@kernel.org>
Currently the in-band alerts for SoundWire peripherals can only
be communicated to the driver through the interrupt_callback
function. This however is slightly inconvenient for devices that wish
to share IRQ handling code between SoundWire and I2C/SPI, the later
would normally register an IRQ handler with the IRQ subsystem. However
there is no reason the SoundWire in-band IRQs can not also be
communicated as an actual IRQ to the driver.
Add support for SoundWire peripherals to register a normal IRQ
handler to receive SoundWire in-band alerts, allowing code to be
shared across control buses. Note that we allow users to use both the
interrupt_callback and the IRQ handler, this is useful for devices
which must clear additional chip specific SoundWire registers that are
not a part of the normal IRQ flow, or the SoundWire specification.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230804104602.395892-2-ckeepax@opensource.cirrus.com
Signed-off-by: Lee Jones <lee@kernel.org>
- Device-tree binding updates:
* Add additional compatible strings for Qualcomm SoCs
* Allow ASIDs to be configured in the DT to work around Qualcomm's
broken hypervisor
* Fix clocks for Qualcomm's MSM8998 SoC
- SMMUv2:
* Support for Qualcomm's legacy firmware implementation featured on
at least MSM8956 and MSM8976.
* Match compatible strings for Qualcomm SM6350 and SM6375 SoC variants
- SMMUv3:
* Use 'ida' instead of a bitmap for VMID allocation
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmTbV6EQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNFGECACBId1R3NcchPg6AkCK3S9qugOdA38W3xRt
1yuO5yULXf34EH6jZ7cq9JwQWRzQt1bhnxpzqnDpwSm6e88PRAa99DIy7suxLz/A
hJJN0GfwdoT8Be/XUK+g6Gnb7zLI5eifp2qcuWZMSTu3yWY3TCytAWxW4EOhwPQB
kOzUaqtM47+HQeXxrCOA7N+l+ebUy2OJoltOUSPgyKOQ5XL4kDMPD82JF8ElwYfX
IAT9TcYA/zZ/qv7nre9F7bYKjTWyXMovBA+NjlHY/HhdE8098K9yEBEar+kSXtxE
sCZ83rpXM/1CEEk9Qq1AkqMOpuONnsDmPOTa/WLFhA6xC1rXtoz3
=U4Vi
-----END PGP SIGNATURE-----
Merge tag 'arm-smmu-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into arm/smmu
Qualc^WArm SMMU updates for 6.6
- Device-tree binding updates:
* Add additional compatible strings for Qualcomm SoCs
* Allow ASIDs to be configured in the DT to work around Qualcomm's
broken hypervisor
* Fix clocks for Qualcomm's MSM8998 SoC
- SMMUv2:
* Support for Qualcomm's legacy firmware implementation featured on
at least MSM8956 and MSM8976.
* Match compatible strings for Qualcomm SM6350 and SM6375 SoC variants
- SMMUv3:
* Use 'ida' instead of a bitmap for VMID allocation
The tty LED trigger uses the obsolete LED_ON & LED_OFF constants when
setting LED brightness. This is bad because the LED_ON constant is equal
to 1, and so when activating the tty LED trigger on a LED class device
with max_brightness greater than 1, the LED is dimmer than it can be
(when max_brightness is 255, the LED is very dimm indeed; some devices
translate 1/255 to 0, so the LED is OFF all the time).
Instead of directly setting brightness to a specific value, use the
led_blink_set_oneshot() function from LED core to configure the blink.
This function takes the current configured brightness as blink
brightness if not zero, and max brightness otherwise.
This also changes the behavior of the TTY LED trigger. Previously if
rx/tx stats kept changing, the LED was ON all the time they kept
changing. With this patch the LED will blink on TTY activity.
Fixes: fd4a641ac8 ("leds: trigger: implement a tty trigger")
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20230802090753.13611-1-kabel@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Coresight TRBE driver shares a single platform data (which is empty btw).
However, with the commit 4e8fe7e5c3
("coresight: Store pointers to connections rather than an array of them")
the coresight core would free up the pdata, resulting in multiple attempts
to free the same pdata for TRBE instances. Fix this by allocating a pdata per
coresight_device.
Fixes: 4e8fe7e5c3 ("coresight: Store pointers to connections rather than an array of them")
Link: https://lore.kernel.org/r/20230814093813.19152-3-hejunhao3@huawei.com
Reported-by: Junhao He <hejunhao3@huawei.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: James Clark <james.clark@arm.com>
Tested-by: Junhao He <hejunhao3@huawei.com>
Link: https://lore.kernel.org/r/20230816141008.535450-2-suzuki.poulose@arm.com
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
select:false makes the schema basically ignored (not selected for given
compatible), unless some other binding references it. It's not really
useful nor needed for device bindings, even if they are part of other
binding (like MFD).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230728171123.110489-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
At the time we call
BUG_ON(props.color == LED_COLOR_ID_MULTI);
the props variable is still initialized to zero.
Call the BUG_ON only after we parse fwnode into props.
Fixes: 77dce3a22e ("leds: disallow /sys/class/leds/*:multi:* for now")
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20230801151623.30387-1-kabel@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Given channel intensity, LED brightness and max LED brightness, the
multicolor LED framework helper led_mc_calc_color_components() computes
the color channel brightness as
chan_brightness = brightness * chan_intensity / max_brightness
Consider the situation when (brightness, intensity, max_brightness) is
for example (16, 15, 255), then chan_brightness is computed to 0
although the fractional divison would give 0.94, which should be rounded
to 1.
Use DIV_ROUND_CLOSEST here for the division to give more realistic
component computation:
chan_brightness = DIV_ROUND_CLOSEST(brightness * chan_intensity,
max_brightness)
Fixes: 55d5d3b46b ("leds: multicolor: Introduce a multicolor class definition")
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20230801124931.8661-1-kabel@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
The current code default set is_off to true except console resource,
this implies bootloader should power off all the resources it uses.
But this is not always true, let's check the HW state and set is_off.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This driver is registered as platform driver, but removing and binding
again would cause system not workable. So suppress bind attrs.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Do not power off console if no_console_suspend, this will leave
the serial device's corresponding PM domain on during system suspend,
which is useful for debug system suspend.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add more PDs for i.MX8QM and i.MX8DXL, including
dma-ch, esai, gpu1, v2x-mu, seco-mu, hdmi, img and etc.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
