Commit graph

361,345 commits

Author SHA1 Message Date
Tero Kristo
908b75e850 ARM: OMAP: add support for oscillator setup
This contains startup and shutdown times for the oscillator. By default
use ULONG_MAX. Oscillator setup is used for calculating and setting up
latencies for sleep modes that disable oscillator.

Based on a patch from Nishanth Menon <nm@ti.com>.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-11-05 15:12:40 -08:00
Tero Kristo
9a1729cbaa ARM: OMAP4: VC: calculate ramp times
OMAP4 VC code now uses voltage deltas + slew rates for calculating
actual ramp times for voltage changes. Both retention / sleep +
off mode voltage ramp times are setup at the same time during
initialization.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-11-05 15:11:32 -08:00
Tero Kristo
27c16b7026 ARM: OMAP4: voltage: add support for VOLTSETUP_x_OFF register
OMAP4 has two VOLTSETUP registers. One is controlling retention and
sleep voltage setup times, the other one off mode setup times. Both
of these need to be setup for stable behavior of the device.
The code setting up the new register will be added in the next
patch.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-11-05 15:10:38 -08:00
Bjorn Helgaas
d4761ba2d6 PCI/ACPI: Add _PRT interrupt routing info before enumerating devices
We used to add the _PRT after enumerating devices behind a new host
bridge.  This moves the _PRT addition *before* the enumeration, since
it no longer depends on the struct pci_bus existing.  This is one
step towards consolidating the .add/.start methods.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Taku Izumi <izumim.taku@jp.fujitsu.com>
2012-11-05 16:10:16 -07:00
Tero Kristo
c589eb3869 ARM: OMAP3: VC: calculate ramp times
OMAP3 VC code now uses voltage deltas + slew rates for calculating actual
ramp times for voltage changes. Previously a static value was used.
Two calculation methods are provided: i2c_timings and off_timings.
I2C timings are used during retention or off mode transition which
is initiated over I2C, and OFF timings are used if PMIC signal
(nsleep) is used to control all the off mode voltages at the same time.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-11-05 15:08:23 -08:00
Tero Kristo
8b5d8c0d71 ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains
These new structs will hold the sleep voltage levels (omap_vc_params)
and voltage processor min / max voltages (omap_vp_params.) Previously
these were part of the PMIC struct, but they do not really belong there,
as they are OMAP chip specific, not PMIC specific parameters. voltdm
code is also changed to use the new structs.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-11-05 15:08:22 -08:00
Tero Kristo
b254012b21 ARM: OMAP: voltage: renamed vp_vddmin and vp_vddmax fields
These are now called vddmin and vddmax, as these fields will be used
globally for selecting voltage ranges for a pmic channel, and not
only for voltage processor.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-11-05 15:03:47 -08:00
Nishanth Menon
f2a0dfefec ARM: OMAP3+: PM: VP: use uV for max and min voltage limits
Every PMIC has it's own eccentricities, For example, one of the
PMIC has MSB set to 1 for a specific function - voltage enable!
using an hardcoded value specific for TWL when copied over to
such an implementation causes the system to crash as the MSB bit
was 0 and the voltage got disabled!.

Instead we use actual values and depend on the convertion routines
to abstract out the eccentricities of each PMIC.

With this, we can now move the voltages to a common location in
voltage.h as they are no longer dependent on PMICs and expect the
PMIC's conversion routines to set a cap if the voltage is out of
reach for the PMIC.

Reported-by: Jon Hunter <jon-hunter@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Vishwanath BS <vishwanath.bs@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-11-05 15:03:34 -08:00
Bjorn Helgaas
79c4412298 ACPI: Pass segment/bus to _PRT add/del so they don't depend on pci_bus
This effectively reverts 859a3f86ca ("ACPI: simplify
acpi_pci_irq_add_prt() API") and d9efae3688 ("ACPI: simplify
acpi_pci_irq_del_prt() API").

The reason is to disentangle these routines from the struct pci_bus.
We want to be able to add the _PRT before the struct pci_bus
exists, and delete the _PRT after we've removed the pci_bus.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
2012-11-05 15:54:22 -07:00
Patil, Rachna
5e53a69b44 IIO : ADC: tiadc: Add support of TI's ADC driver
This patch adds support for TI's ADC driver.
This is a multifunctional device.
Analog input lines are provided on which
voltage measurements can be carried out.
You can have upto 8 input lines.

Signed-off-by: Patil, Rachna <rachna@ti.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-05 23:50:27 +01:00
Patil, Rachna
2b99bafab1 input: TSC: ti_tsc: Convert TSC into a MFDevice
This patch converts touchscreen into a MFD client.
All the register definitions, clock initialization,
etc has been moved to MFD core driver.

Signed-off-by: Patil, Rachna <rachna@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-05 23:50:27 +01:00
Patil, Rachna
01636eb970 mfd: ti_tscadc: Add support for TI's TSC/ADC MFDevice
Add the mfd core driver which supports touchscreen
and ADC.
With this patch we are only adding infrastructure to
support the MFD clients.

Signed-off-by: Patil, Rachna <rachna@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-05 23:50:27 +01:00
Patil, Rachna
55c04de517 input: TSC: ti_tscadc: Rename the existing touchscreen driver
Make way for addition of MFD driver.
The existing touchsreen driver is a MFD client.
For better readability we rename the file to
indicate its functionality as only touchscreen.

Signed-off-by: Patil, Rachna <rachna@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-05 23:50:27 +01:00
Patil, Rachna
c6e86db2be input: TSC: ti_tscadc: Remove definition of End Of Interrupt register
The touchscreen IP uses level sensitive interrupts rather
than edge sensitive interrupts and therefore the is no need
to use the EOI register to have the module re-strobe the
interrupt line if there pending interrupts exist.

Signed-off-by: Patil, Rachna <rachna@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-05 23:50:26 +01:00
Patil, Rachna
30af55f930 input: TSC: ti_tscadc: set FIFO0 threshold Interrupt
Code currently uses FIFO1 threshold interrupt.
since this is a MFD, Dedicating FIFO0 to touchscreen
and making way for other devices to use FIFO1 as well.
The FIFO can be shared between 2 devices but since the
interrupt used is threshold interrupt on FIFO1, we would
end up having wrong interrupts. Hence changing the same.

Signed-off-by: Patil, Rachna <rachna@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-05 23:50:26 +01:00
Patil, Rachna
d1fb57435c input: TSC: ti_tscadc: Add Step configuration as platform data
There are 16 programmable Step Configuration
registers which are used by the sequencer.
Program the Steps in order to configure a channel
input to be sampled. If the same step is applied
several times, the coordinate values read are more
accurate.
Hence we provide the user an option of how many steps
should be configured.

For ex: If this value is assigned as 4, This means that
4 steps are applied to read x co-ordinate and 4 steps to read
y co-ordinate. Furtheron the interrupt handler already
holds code to use delta filter and report the best value
out of these values to the input sub-system.

Signed-off-by: Patil, Rachna <rachna@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-05 23:50:26 +01:00
Patil, Rachna
33f5cc605d input: TSC: ti_tscadc: Correct register usage
This patch cleans up the wrong register definitions
and usage for touchscreen controller.
Bit masks were not defined earlier.

For ex: consider a register define as:
write(xyz, ABC)
ABC is expected to be written to register bits 0-11.
Here we see that value written is as expected, but this write
is also affecting all the remaining bits of xyz.
The remaining bits hold the default value as 0 and the write
also sets it to zero. Hence wrong usage were not causing user
visible bugs.
Due to these reasons it was difficult to follow when
compared with TRM.

Unused definitions are also removed.
Since there is change in some naming convention because of
all the above mentioned reasons, the same has been
updated throughout the code.
Bit declarations are grouped to increase readability.

Signed-off-by: Patil, Rachna <rachna@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-05 23:50:26 +01:00
Colin Cross
cd8ce15903 ARM: OMAP4: retrigger localtimers after re-enabling gic
'Workaround for ROM bug because of CA9 r2pX gic control'
register change disables the gic distributor while the secondary
cpu is being booted.  If a localtimer interrupt on the primary cpu
occurs when the distributor is turned off, the interrupt is lost,
and the localtimer never fires again.

Make the primary cpu wait for the secondary cpu to reenable the
gic distributor (with interrupts off for safety), and then
check if the pending bit is set in the localtimer but not the
gic.  If so, ack it in the localtimer, and reset the timer with
the minimum timeout to trigger a new timer interrupt.

Signed-off-by: Colin Cross <ccross@android.com>
[s-jan@ti.com: adapted to k3.4 + validated functionality]
Signed-off-by: Sebastien Jan <s-jan@ti.com>
[t-kristo@ti.com: dropped generic ARM kernel exports from the code, rebased
 to mainline]
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-11-05 14:26:43 -08:00
Santosh Shilimkar
ff999b8a09 ARM: OMAP4460: Workaround for ROM bug because of CA9 r2pX GIC control register change.
On OMAP4+ devices, GIC register context is lost when MPUSS hits
the OSWR(Open Switch Retention). On the CPU wakeup path, ROM code
gets executed and one of the steps in it is to restore the
saved context of the GIC. The ROM Code GIC distributor restoration
is split in two parts: CPU specific register done by each CPU and
common register done by only one CPU.

Below is the abstract flow.

...............................................................
- MPUSS in OSWR state.
- CPU0 wakes up on the event(interrupt) and start executing ROM code.

[..]

- CPU0 executes "GIC Restoration:"

[...]

- CPU0 swicthes to non-secure mode and jumps to OS resume code.

[...]

- CPU0 is online in OS
- CPU0 enables the GIC distributor. GICD.Enable Non-secure = 1
- CPU0 wakes up CPU1 with clock-domain force wakeup method.
- CPU0 continues it's execution.
[..]

- CPU1 wakes up and start executing ROM code.

[..]

- CPU1 executes "GIC Restoration:"

[..]

- CPU1 swicthes to non-secure mode and jumps to OS resume code.

[...]

- CPU1 is online in OS and start executing.
[...]   -

GIC Restoration: /* Common routine for HS and GP devices */
{
       if (GICD != 1)  { /* This will be true in OSWR state */
               if (GIC_SAR_BACKUP_STATE == SAVED)
                       - CPU restores GIC distributor
               else
                       - reconfigure GIC distributor to boot values.

               GICD.Enable secure = 1
       }

       if (GIC_SAR_BACKUP_STATE == SAVED)
               - CPU restore its GIC CPU interface registers if saved.
       else
               - reconfigure its GIC CPU interface registers to boot
                       values.
}
...............................................................

So as mentioned in the flow, GICD != 1 condition decides how
the GIC registers are handled in ROM code wakeup path from
OSWR. As evident from the flow, ROM code relies on the entire
GICD register value and not specific register bits.

The assumption was valid till CortexA9 r1pX version since there
was only one banked bit to control secure and non-secure GICD.
Secure view which ROM code sees:
       bit 0 == Enable Non-secure
Non-secure view which HLOS sees:
       bit 0 == Enable secure

But GICD register has changed between CortexA9 r1pX and r2pX.
On r2pX GICD register is composed of 2 bits.
Secure view which ROM code sees:
       bit 1 == Enable Non-secure
       bit 0 == Enable secure
Non-secure view which HLOS sees:
       bit 0 == Enable Non-secure

Hence on OMAP4460(r2pX) devices, if you go through the
above flow again during CPU1 wakeup, GICD == 3 and hence
ROM code fails to understand the real wakeup power state
and reconfigures GIC distributor to boot values. This is
nasty since you loose the entire interrupt controller
context in a live system.

The ROM code fix done on next OMAP4 device (OMAP4470 - r2px) is to
check "GICD.Enable secure != 1" for GIC restoration in OSWR wakeup path.

Since ROM code can't be fixed on OMAP4460 devices, a work around
needs to be implemented. As evident from the flow, as long as
CPU1 sees GICD == 1 in it's wakeup path from OSWR, the issue
won't happen. Below is the flow with the work-around.

...............................................................
- MPUSS in OSWR state.
- CPU0 wakes up on the event(interrupt) and start executing ROM code.

[..]

- CPU0 executes "GIC Restoration:"

[..]

- CPU0 swicthes to non-secure mode and jumps to OS resume code.

[..]

- CPU0 is online in OS.
- CPU0 does GICD.Enable Non-secure = 0
- CPU0 wakes up CPU1 with clock domain force wakeup method.
- CPU0 waits for GICD.Enable Non-secure = 1
- CPU0 coninues it's execution.
[..]

- CPU1 wakes up and start executing ROM code.

[..]

- CPU1 executes "GIC Restoration:"

[..]

- CPU1 swicthes to non-secure mode and jumps to OS resume code.

[..]

- CPU1 is online in OS
- CPU1 does GICD.Enable Non-secure = 1
- CPU1 start executing
[...]
...............................................................

With this procedure, the GIC configuration done between the
CPU0 wakeup and CPU1 wakeup will not be lost but during this
short windows, the CPU0 will not receive interrupts.

The BUG is applicable to only OMAP4460(r2pX) devices.
OMAP4470 (also r2pX) is not affected by this bug because
ROM code has been fixed.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-11-05 14:26:43 -08:00
Tero Kristo
c962184459 ARM: OMAP4: PM: add errata support
Added similar PM errata flag support as omap3 has. This should be used
in similar manner, set the flags during init time, and check the flag
values during runtime.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-11-05 14:26:43 -08:00
Jean Delvare
4101ece3a2 hwmon: Fix chip feature table headers
These got broken by recent patches fixing checkpatch warnings in these
drivers. The trick is that the patches themselves looked good, but the
source files after applying them do not. That's why I am not a big fan
of using tabs inside comments.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
2012-11-05 21:54:40 +01:00
Jean Delvare
3300fb4f88 hwmon: (w83627ehf) Force initial bank selection
Don't assume bank 0 is selected at device probe time. This may not be
the case. Force bank selection at first register access to guarantee
that we read the right registers upon driver loading.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Cc: stable@vger.kernel.org
2012-11-05 21:54:39 +01:00
Lars-Peter Clausen
4eb3ccf157 staging:iio: Move the ad7887 driver out of staging
The driver does not expose any custom API to userspace and none of the standard
static code checker tools report any issues, so move it out of staging.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-11-05 20:39:54 +00:00
Lars-Peter Clausen
98efb70add staging:iio:ad7887: Use passed in chan spec in ad7887_read_raw
Use the passed in chan spec in ad7887_read_raw instead of alawys using the first
chan spec entry from the chip info data. Since all channels have the same shift
and realbits from a functional point of view it does not matter which chan spec
is used, but the patch makes the a bit more clear.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-11-05 20:39:53 +00:00
Lars-Peter Clausen
fce7c3eac7 staging:iio:ad7887: Allow to use internal ref in two channel mode
While it is not recommended to use the internal reference in two channel mode in
order to obtain optimal performance it is still possible to use it.

While we are at it also get rid of the duplicate tx_cmd_buf entries. There are
only two unique entries. One for channel 1 and one for channel 2.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-11-05 20:39:53 +00:00
Lars-Peter Clausen
5daa751f89 staging:iio:ad7887: Use proper kernel doc
Use proper kernel doc to document the platform data struct.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-11-05 20:39:52 +00:00
Lars-Peter Clausen
65dd3d3d7a staging:iio:ad7887: Squash everything into one file
The recent cleanups have decimated the drivers code size by quite a bit. It is
only a few hundred lines in total now and we also always build buffer support,
so there really is no need to spread the driver out over multiple files. Putting
everything into one file also allows to reduce the code size a bit more by
removing a few lines of boilerplate code.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-11-05 20:39:52 +00:00
Lars-Peter Clausen
bf5d2613c9 staging:iio:ad7887: Rework regulator handling
Rework the regulator handling of the ad7887 driver to match more closely what we
do for other drivers. Only request the regulator if a external reference is
used, but treat it as an error if requesting the regulator fails. Also remove
the possibility to specify the reference voltage via platform data and always
use the regulator for this.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-11-05 20:39:52 +00:00
Lars-Peter Clausen
bd6880477a staging:iio:ad7887: Preallocate sample buffer
We know that the sample buffer will at most need to hold two 16 bit samples and
the 64 bit aligned 64 bit timestamp. Preallocate a buffer large enough to hold
this instead of allocating and freeing it each time a sample is read.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-11-05 20:39:51 +00:00
Sage Weil
22cddde104 ceph: Fix i_size update race
ceph_aio_write() has an optimization that marks cap EPH_CAP_FILE_WR
dirty before data is copied to page cache and inode size is updated.
If ceph_check_caps() flushes the dirty cap before the inode size is
updated, MDS can miss the new inode size. The fix is move
ceph_{get,put}_cap_refs() into ceph_write_{begin,end}() and call
__ceph_mark_dirty_caps() after inode size is updated.

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Sage Weil <sage@inktank.com>
2012-11-05 11:07:23 -08:00
Olof Johansson
976669971f From Paul Walmsley <paul@pwsan.com>:
The first set of OMAP PRM/CM-related cleanup patches for 3.8.
 Prepares for the future move of the PRM/CM code to drivers/.  Also
 includes some prcm.[ch] cleanup patches from the WDTIMER cleanup
 series that don't need external acks.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJQivPKAAoJEBvUPslcq6VzWksQAI/SlM4ai8Ti/iu+1SdDrhGN
 j9JRQk7UJQfACj1gwLb7Fg2HkyN6DmA9wnvzN6n/BWTcnqoK5uTNMYJ47vHmjqjq
 rcPMTACnb1URYqrVV1WZ4vMrK3L3W+VlkFLD/w5tQWlQPw5EROapeinnqcNVCZQv
 VHUCgBUrmwZ1DEjwomYx0ZUF0y0vH/I7+QIBPoDarSWKE6ZTxXjgZ8SOSgdpGcAC
 Qbmwo4TgGMpzkTq29dD5qGC8oWSsBI1btRQMo/HgqkOVkFb/aYjDas/SJUN8a3P1
 qOZLagAVcigG2SKq76TvUkK4ayHYvEMi7onqlMshrtM7+VtEMm0f6MaeCWQfQh2K
 kQefDcV/MCWKrxGPPxmhHaI4ErrVUI/irIJESZN4d969m049rq5iYsMCtAzgKYdN
 4gSDZIWAAtD8XT2dTlU34zdIf2+mqzz6bruE/xJ5xSqQDaB3bgoGCHQ1ZP81p2TV
 5SbgtmKkPq5rXegJ/d0E9MjtgUCX8UxmOwanP8QIoHMnR9vDPAQPvtjrT3qnovPz
 o7r0v7Uy/0B/H9JdCUl9k0bY3jRnfA5xKHkFioU8Y2q5NJmAo4msJhUa9Sr+BJpT
 oAxTRifnuSMwV3I57X3fKjKAM4ahYxrhS7jDxsVgMveKeTCu7N+/LlnLFivzZ8iq
 7N35Hg38jPs/Hc6Acuxn
 =CC6v
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v3.8/cleanup-prcm-part1-take2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/headers

From Paul Walmsley <paul@pwsan.com> via Tony Lindgren:

The first set of OMAP PRM/CM-related cleanup patches for 3.8.
Prepares for the future move of the PRM/CM code to drivers/.  Also
includes some prcm.[ch] cleanup patches from the WDTIMER cleanup
series that don't need external acks.

* tag 'omap-for-v3.8/cleanup-prcm-part1-take2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: PRM: create PRM reset source API for the watchdog timer driver
  ARM: OMAP1: create read_reset_sources() function (for initial use by watchdog)
  ARM: OMAP2+: CM: prepare for use of cm_ll_data function pointers
  ARM: OMAP2+: PRM: prepare for use of prm_ll_data function pointers
  ARM: OMAP2/3: clockdomain/PRM/CM: move the low-level clockdomain functions into PRM/CM
  ARM: OMAP2+: CM/hwmod: split CM functions into OMAP2, OMAP3-specific files
  ARM: OMAP2+: powerdomain/PRM: move the low-level powerdomain functions into PRM
  ARM: OMAP2+: PRM: split PRM functions into OMAP2, OMAP3-specific files
  ARM: OMAP2+: PRM: remove PRM weak functions
2012-11-05 10:52:03 -08:00
Laxman Dewangan
ffa05e450c ARM: tegra: Add OF_DEV_AUXDATA for SLINK driver in board dt
Add OF_DEV_AUXDATA for slink driver for Tegra20 and Tegra30
board dt files.
Set the parent clock of slink controller to PLLP and configure
clock to 100MHz.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-05 11:36:23 -07:00
Joseph Lo
d065ab7189 ARM: tegra: common: using OF api for L2 cache init
Moving L2 cache init to DT support.

Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-05 11:36:23 -07:00
Joseph Lo
5ab134ad09 ARM: tegra: dt: add L2 cache controller
Add L2 cache controller binding into DT for Tegra.

Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-05 11:36:23 -07:00
Joseph Lo
d534b5d4a5 ARM: tegra30: clocks: add AHB and APB clocks
Adding the AHB and APB bus clock for Tegra30.

Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-05 11:36:22 -07:00
Wei Ni
25804d8123 ARM: tegra: set up wlan clocks for tegra dt
Set up the wlan clock tree for Tegra20 and Tegra30.

Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-05 11:36:22 -07:00
Stephen Warren
bb1de8877c ARM: tegra: move irammap.h to mach-tegra
Nothing outside mach-tegra uses this file, so there's no need for it to
be in <mach/>.

Since uncompress.h and debug-macro.S remain in include/mach, they need
to include "../../irammap.h" becaue of this change. Both these usages
will be removed shortly, when Tegra's DEBUG_LL implementation is updated
not to pass information through IRAM.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-05 11:36:06 -07:00
Stephen Warren
2be39c079d ARM: tegra: move iomap.h to mach-tegra
Nothing outside mach-tegra uses this file, so there's no need for it to
be in <mach/>.

Since uncompress.h and debug-macro.S remain in include/mach, they need
to include "../../iomap.h" becaue of this change. uncompress.h will soon
be deleted in later multi-platform/single-zImage patches. debug-macro.S
will need to continue to include this header using an explicit relative
path, to avoid duplicating the physical->virtual address mapping that
iomap.h dictates.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-05 11:36:06 -07:00
Stephen Warren
8a5d51fda0 ARM: tegra: remove <mach/dma.h>
Remove includes of <mach/dma.h> from sound/soc; nothing from it is used.

Remove include of <mach/dma.h> from mach-tegra/apbio.c; since the DMA
transfers made by this file don't need flow-control with any peripheral,
there's no need to set any slave ID.

Once those changes are made, there are no remaining users of <mach/dma.h>
so remove it. Drivers should get this information from device tree. This
removal is necessary for single zImage.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-05 11:36:06 -07:00
Stephen Warren
cc95e347cb ARM: tegra: move tegra-ahb.h out of arch/arm/mach-tegra/
We wish to empty arch/arm/mach-tegra/include/mach/ as much as possible
to enable single zImage. Move tegra-ahb.h to a more central location
(suggested by Arnd, OK'd by Greg KH), and actually make tegra-ahb.c
include the header to ensure client and provider agree on the prototype.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-05 11:36:06 -07:00
Stephen Warren
a25186eb03 ARM: tegra: remove unnecessary includes of <mach/*.h>
This should make it easier to delete or move <mach/*.h>; something that
is useful for single-zImage.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-05 11:36:05 -07:00
Stephen Warren
e68917a1e3 iommu: tegra: remove include of <mach/iomap.h>
Nothing from this file is used, and the file will hopefully be deleted
soon.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Joerg Roedel <joerg.roedel@amd.com>
2012-11-05 11:36:05 -07:00
Stephen Warren
f59435b1d1 staging: nvec: remove include of <mach/iomap.h>
Nothing from this file is used, and the file will hopefully be deleted
soon.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-By: Marc Dietrich <marvin24@gmx.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-05 11:36:05 -07:00
Stephen Warren
f39b158d66 crypto: tegra: remove include of <mach/clk.h>
Nothing from this file is used, and the file will hopefully be deleted
soon.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-11-05 11:36:05 -07:00
Stephen Warren
b9c665d75b ARM: tegra: update *.dts for regulator-compatible deprecation
Commit 13511de "regulator: deprecate regulator-compatible DT property"
now allows for simpler content within the regulators node within a PMIC.
Modify all the Tegra device tree files to take advantage of this.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-11-05 11:36:04 -07:00
Stephen Warren
dc9fe7f973 usb: phy: tegra remove include of <mach/iomap.h>
Almost nothing from this file is used, and the file will hopefully be
deleted soon. Copy the tiny portions that are used directly into
tegra_usb_phy.c. I believe that Venu Byravarasu is working on cleaning up
our USB driver, and those cleanups will remove the need for these
constants.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Venu Byravarasu <vbyravarasu@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-05 11:36:04 -07:00
Stephen Warren
f7d147dd87 usb: host: tegra remove include of <mach/iomap.h>
Almost nothing from this file is used, and the file will hopefully be
deleted soon. Copy the tiny portions that are used directly into
ehci-tegra.c. I believe that Venu Byravarasu is working on cleaning up
our USB driver, and those cleanups will remove the need for these
constants.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Venu Byravarasu <vbyravarasu@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-05 11:36:04 -07:00
Olof Johansson
9237b5aa44 Here is the third set of plat header removal for omap2+.
This is based on the following minimal topic branches
 coordinated with the related driver maintainers:
 
 omap-for-v3.8/cleanup-headers-usb
 omap-for-v3.8/cleanup-headers-menelaus
 
 In addition to that, there are few fixes to the previously
 merged patches that can show up with customized configs.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJQivZpAAoJEBvUPslcq6VzTiQQAL/28kiWuI0LF0PXYXFsUmKM
 q1sSV7Ut/8dHoCQBalhTfyvwMvWLETojIT4gjAVnEIW17P8ftiEWmhG/Zu+JUi6z
 OsSj0JhKJ1RFFbb9zwm73vpShnjtBvZIM+UWTeUImhabd40GpkeOltCtQk6RcP90
 BARMk5Xr2xmtCQUkNCCxupO3mrulSOZRg+pB36KAaa2+sKhxvMrMLeKcXrT9EN37
 0lW1u6xuFeNKMgvoa7jB8uN4BR3xsEXBjEj6g3H/jGrJxQSYmueDzrRm7OqBr9Y7
 OyIK8fdoFcKsr8I9sJoJBg7mohbvE2NagHcvocX1Bns/9Ha29z4uu/iXwX+9OTuQ
 beFqMJURQ1sdV0i6fNGsnmB+x8m0sN3LOYHv0jJA1fmGxpe+pJ1q2MRWabO6jbJM
 TK0CmA+vcgE0XxDjvwpAyY9eO4OqYWKYo1ZzvwJYke12/gmnxD67cvaZ61boOgF2
 d9iJB7Odb6ovpsJaKlDeeXtU++aypkgPx8iKiosTOghwSldTW+NHQCQ2utL8rPwm
 ZZb2hYUCLI3sm9fBE2zIBYnQ5JRp6yPwua5s3URs3XGAn6t55PXc+ISG7hqBtNR8
 iPtJxH9AmV5wH84sWQ96G4mdGzZ1aDaQ7EZ7eqeOiam4QQMiRzKUYtyQ4R4XuLKr
 57RRZhPXOtKsDWrwQuOZ
 =qeS5
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v3.8/cleanup-headers-part3-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/headers

From Tony Lindgren:

Here is the third set of plat header removal for omap2+.

This is based on the following minimal topic branches
coordinated with the related driver maintainers:

omap-for-v3.8/cleanup-headers-usb
omap-for-v3.8/cleanup-headers-menelaus

In addition to that, there are few fixes to the previously
merged patches that can show up with customized configs.

* tag 'omap-for-v3.8/cleanup-headers-part3-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP1: fix sparse warning added by commit 4c98dc6b8e
  ARM: OMAP1: fix build breakage introduced by commit 25c7d49ed4
  ARM: OMAP2+: fix build breakage introduced by commit b7754452b3
2012-11-05 10:28:38 -08:00
Olof Johansson
6c97a18959 Merge branch 'depends/omap-cleanup-headers-menelaus' into next/headers
Again, resolve conflicts identical to how Tony did.

Conflicts:
	arch/arm/mach-omap2/board-h4.c
	arch/arm/mach-omap2/board-n8x0.c

Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-05 10:28:21 -08:00
Olof Johansson
365480d67b Merge branch 'depends/omap-cleanup-headers-usb' into next/headers
Conflicts resolved same as Tony did in his later dependent branch:

	arch/arm/mach-omap1/clock.c
	arch/arm/mach-omap2/board-2430sdp.c
	arch/arm/mach-omap2/board-4430sdp.c
	arch/arm/mach-omap2/board-cm-t35.c
	arch/arm/mach-omap2/board-igep0020.c
	arch/arm/mach-omap2/board-ldp.c
	arch/arm/mach-omap2/board-omap3beagle.c
	arch/arm/mach-omap2/board-omap3logic.c
	arch/arm/mach-omap2/board-omap4panda.c
	arch/arm/mach-omap2/board-overo.c
	arch/arm/mach-omap2/board-rm680.c
	arch/arm/mach-omap2/board-rx51.c
	arch/arm/mach-omap2/twl-common.c
	arch/arm/mach-omap2/usb-host.c
	arch/arm/mach-omap2/usb-musb.c

Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-05 10:27:33 -08:00