Commit graph

361,345 commits

Author SHA1 Message Date
Johannes Berg
2eb81a40aa iwlwifi: don't clear CTL_AMPDU on frame status
There's no reason to clear the CTL_AMPDU flag on
transmitted frame status, it's not used by the
driver here and mac80211 only uses it for some
rate statistics.

Also remove a stray space in the function.

Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-05 16:12:23 +01:00
Johannes Berg
7c34158231 iwlwifi: handle DMA mapping failures
The RX replenish code doesn't handle DMA mapping failures,
which will cause issues if there actually is a failure. This
was reported by Shuah Khan who found a DMA mapping framework
warning ("device driver failed to check map error").

Cc: stable@vger.kernel.org
Reported-by: Shuah Khan <shuah.khan@hp.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-05 16:08:58 +01:00
Johannes Berg
37c477dc1c iwlwifi: fix flush command
The flush command really flushes queues, not
FIFOs, and the first 32 bits indicate the
queues to flush, not FIFOs. Change the command
accordingly.

Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-05 15:59:58 +01:00
Catalin Marinas
3fd9396af8 Linux 3.7-rc4
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQEcBAABAgAGBQJQlr0MAAoJEHm+PkMAQRiGLVQH/171fUorGn+u2k7dNhSWJXHB
 pPy6MbZhuBWepgRZGS0ffiC5tBvQaf9iK9Fh/9aqrDDw2aELk0CLPqQcfAUF/Jzf
 USPdBSIMNikgZtlWhabxuj/zKdaw8UuiJpCf3rMyIRmjQgmZyw/53TEqF54xTv0I
 Y4Y21vTSVXilQwvwYvcsCEBFrTZqXjLWQ60Hk+QRS9GV7a9m2LFcdiPOtRv17gbd
 CBDuiMHN9R04l2bB+5WHHsu+TNNf5uy3wAgEskDTftneXWjW44R4UR8O0rQh1ezQ
 Pa5WpCyJRRG8UOtPKTS6LEbljBwLLIoVI2JRoJrWoy3OkT63wyowFXyLGWCCrHY=
 =qAGi
 -----END PGP SIGNATURE-----

Merge tag 'v3.7-rc4' into upstream-master

Linux 3.7-rc4
2012-11-05 14:58:32 +00:00
Antonio Quartulli
391e53e33f mac80211: implement set_mcast_rate() callback
This new callback can be used to tune the rate to be used to send
multicast frames.

In the current state the multicast rate can be specified on IBSS/MESH
joining only. This makes it impossible to select a custom multicast
rate when then join command is sent by an external program (e.g.
wpa_supplicant)

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-05 15:54:46 +01:00
Antonio Quartulli
f4e583c893 nl/cfg80211: add the NL80211_CMD_SET_MCAST_RATE command
This command triggers a new callback: set_mcast_rate(). It enables
the user to change the rate used to send multicast frames for vif
configured as IBSS or MESH_POINT

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-05 15:54:45 +01:00
Arend van Spriel
ba350fbc53 wireless: add peer-to-peer related definitions
The Peer-to-Peer IE is vendor-specific IE identified by WiFi Alliance
OUI and specific P2P OUI type. The payload of this IE consists of
so-called P2P attributes. This patch adds definitions for processing
these attributes.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-05 15:35:32 +01:00
Axel Lin
f6f94f6660 pinctrl: at91: Staticize non-exported symbols
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-05 14:30:45 +01:00
Arik Nemtsov
987c285c2a mac80211: sync acccess to tx_filtered/ps_tx_buf queues
These are accessed without a lock when ending STA PSM. If the
sta_cleanup timer accesses these lists at the same time, we might crash.

This may fix some mysterious crashes we had during
ieee80211_sta_ps_deliver_wakeup.

Cc: stable@vger.kernel.org
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Ido Yariv <ido@wizery.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-05 14:19:55 +01:00
Johannes Berg
8655201726 mac80211: send deauth only with channel context
When userspace asks to deauthenticate and we're just
authenticated (or still authenticating) send a deauth
frame instead of deleting the auth request.

On the other hand, if we've just disassociated and
therefore deleted all our state already, drop the
deauth request because we no longer have a channel
context to send it on.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-05 14:13:33 +01:00
Tomi Valkeinen
230edc033d OMAPDSS: DISPC: fix DS variable name
check_horiz_timing_omap3() has a variable named 'DS'. i386 uses DS name
for something else, causing a compilation error. As 'DS' is not a very
good local variable name in the first place, let's change it to 'ds',
fixing the issue.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-05 14:46:15 +02:00
Josh Cartwright
78d6785db1 ARM: zynq: dts: add description of the second uart
The zynq-7000 has an additional UART at 0xE0001000.  Describe it in the
device tree.

Signed-off-by: Josh Cartwright <josh.cartwright@ni.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
2012-11-05 13:38:44 +01:00
Josh Cartwright
03e07595fe ARM: zynq: move arm-specific sys_timer out of ttc
Move the sys_timer definition out of ttc driver and make it part of the
common zynq code.  This is preparation for renaming and COMMON_CLK
support.

Signed-off-by: Josh Cartwright <josh.cartwright@ni.com>
Tested-by: Michal Simek <michal.simek@xilinx.com>
2012-11-05 13:38:32 +01:00
Stefan Achatz
f114fec54c HID: roccat: Cleanup of koneplus module
Removed caching of profile data which lowers memory footprint,
speeds up init and fixes problems with device reset.
Removed unnecessary infos in header.
Code moved nearer to format of newer drivers.

Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-05 13:17:39 +01:00
Stefan Achatz
fabe51eb68 HID: roccat: enable Koneplus device reset
Device can be reset to factory state by sending a command via info sysfs attr.
Added binary attribute info for this purpose, which obsoletes firmware_version
attribute.

Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-05 13:17:39 +01:00
Stefan Achatz
9e78eb8fbb HID: roccat: enable Savu device reset
Device can be reset to factory state by sending a command via info sysfs attr.
Changed from ro to rw to enable this feature.

Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-05 13:17:39 +01:00
Stefan Achatz
8e74a2d31b HID: roccat: add support for KoneXTD
KoneXTD is just a Kone[+] with updated sensor, so it's handled by
koneplus driver.

Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-05 13:17:38 +01:00
Sergiu Giurgiu
4492363251 ALSA: virtuoso: Xonar DSX support
This patch adds support for ASUS - Xonar DSX sound cards. Tested on
openSUSE 12.2 with kernel:
Linux 3.4.6-2.10-desktop #1 SMP PREEMPT Thu Jul 26 09:36:26 UTC 2012 (641c197) x86_64 x86_64 x86_64 GNU/Linux
Works:
 - play sounds
 - adjust volume on master channel.
 - mute .

Since Xonar DS uses the same chip, everything that works for DS should
work for DSX as well.

Signed-off-by: Sergiu Giurgiu <sgiurgiu11@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-05 12:53:16 +01:00
Sachin Prabhu
3798f47aa2 cifs: Do not lookup hashed negative dentry in cifs_atomic_open
We do not need to lookup a hashed negative directory since we have
already revalidated it before and have found it to be fine.

This also prevents a crash in cifs_lookup() when it attempts to rehash
the already hashed negative lookup dentry.

The patch has been tested using the reproducer at
https://bugzilla.redhat.com/show_bug.cgi?id=867344#c28

Cc: <stable@kernel.org> # 3.6.x
Reported-by: Vit Zahradka <vit.zahradka@tiscali.cz>
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
2012-11-05 06:45:54 -05:00
Axel Lin
8c995d6dd6 pinctrl: nomadik: Add terminating entry for platform_device_id table
The platform_device_id table is supposed to be zero-terminated.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-05 12:45:17 +01:00
Takashi Iwai
ae24c3191b ALSA: hda - Force to reset IEC958 status bits for AD codecs
Several bug reports suggest that the forcibly resetting IEC958 status
bits is required for AD codecs to get the SPDIF output working
properly after changing streams.

Original fix credit to Javeed Shaikh.

BugLink: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/359361

Reported-by: Robin Kreis <r.kreis@uni-bremen.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-05 12:36:32 +01:00
Vipul Kumar Samar
0504271c8d pinctrl: SPEAr1340: Add clcd sleep mode pin configuration
CLCD pads must be configured differently for sleep mode. This patch adds support
for clcd_sleep_pingroup.

Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-05 12:34:32 +01:00
Deepak Sikri
35d1480694 pinctrl: SPEAr1340: Make DDR reset & clock pads as gpio
Some gpio pins are used to control DDR reset and clock enable while the system
is moved into Low power. This patch adds in the corresponding GPIO entries in
the pads_as_gpio_pins to ensure the pads are available as gpio's.

Signed-off-by: Deepak Sikri <deepak.sikri@st.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-05 12:34:26 +01:00
Shiraz Hashim
0e6f1e5c39 pinctrl: SPEAr1310: add register entries for enabling pad direction
Pad direction must also be updated for SPEAr1310, while setting pads values.
This patch adds support for that.

Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-05 12:34:23 +01:00
Vipul Kumar Samar
f7c5b3d574 pinctrl: SPEAr1310: Separate out pci pins from pcie_sata pin group
SPEAr1310 has separate PCI and PCIe implementations which are not muxed with
each other. Presently they have been implemented as muxed together with SATA and
are represented wrongly in the software.

In reality only PCIe and SATA implementations are muxed with each other. This
patch separates out pci pins creating a new pingroup and function for pci.

Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Shiraz Hashim <shiraz.hashim@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-05 12:34:20 +01:00
Vipul Kumar Samar
82a2deb93c pinctrl: SPEAr1310: Fix value of PERIP_CFG reigster and MCIF_SEL_SHIFT
This patch fixes two macros: PERIP_CFG registers offset and MCIF selection
shift.

Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-05 12:33:57 +01:00
Shiraz Hashim
b06fbfdb06 pinctrl: SPEAr1310: fix clcd high resolution pin group name
All group names in SPEAr pinctrl have "_grp" at the end of their name. Do the
same for clcd_high_res_grp.

Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-05 12:33:46 +01:00
Deepak Sikri
b06bf9a905 pinctrl: SPEAr320: Correct pad mux entries for rmii/smii
pin entries of rmii and smii are interchanged by mistake. Fix it.

Signed-off-by: Deepak Sikri <deepak.sikri@st.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-05 12:33:41 +01:00
Shiraz Hashim
a778005589 pinctrl: SPEAr3xx: correct register space to configure pwm
To have pwm on pad no. 34 we also need to select between pwm and SD_LED
functions. Add this to pwm pin mux register configuration.

Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Vipin Kumar <vipin.kumar@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-05 12:33:37 +01:00
Viresh Kumar
0b53fa3535 pinctrl: SPEAr: Don't update all non muxreg bits on pinctrl_disable
Not all bits of a register are used for pinctrl in SPEAr. So only update bits
relevant to pinctrl using muxreg->mask.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-05 12:33:34 +01:00
Ondrej Zary
5c0ee9497b ALSA: es1968: Add ESS vendor ID to pm_whitelist
Add generic ESS vendor ID to pm_whitelist. This should fix suspend on
all Maestro-2 and Maestro-2E based PCI cards.
Tested on Terratec DMX and SF64-PCE2.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-05 12:32:35 +01:00
Daniel J Blueman
00e17f767e ALSA: HDA: Mark CS260x immutable structures const
Mark structures that won't change const.

Signed-off-by: Daniel J Blueman <daniel@quora.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-05 12:29:00 +01:00
Daniel J Blueman
16337e028a ALSA: HDA: Fix digital microphone on CS420x
Correctly enable the digital microphones with the right bits in the
right coeffecient registers on Cirrus CS4206/7 codecs. It also
prevents misconfiguring ADC1/2.

This fixes the digital mic on the Macbook Pro 10,1/Retina.

Based-on-patch-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Daniel J Blueman <daniel@quora.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-05 12:28:30 +01:00
Alexander Stein
5a83b4b5a3 ALSA: hda: Cirrus: Fix coefficient index for beep configuration
Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-05 12:27:38 +01:00
Tomi Valkeinen
a4ae0ba80b Merge branch '3.8/dsi-pll-work'
Merge omapdss patches to enable using DSI PLL for DPI output.
2012-11-05 11:30:21 +02:00
Tomi Valkeinen
0e8276ef75 OMAPDSS: DPI: always use DSI PLL if available
We currently get the decision whether to use PRCM or DSI PLL clock for
DPI from the board file. This is not a good way to handle it, and it
won't work with device tree.

This patch changes DPI to always use DSI PLL if it's available.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-05 11:17:39 +02:00
Tomi Valkeinen
6061675b3f OMAPDSS: DPI: verify if DSI PLL is operational
The SoCs that have DSI module should have a working DSI PLL. However,
some rare boards have not connected the powers to the DSI PLL.

This patch adds a function that tries to power up the DSI PLL, and
reports if that doesn't succeed. DPI uses this function to fall back to
PRCM clocks if DSI PLL doesn't work.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-05 11:17:39 +02:00
Tomi Valkeinen
8a3db406f5 OMAPDSS: DPI: use dpi.dsidev to see whether to use dsi pll
Instead of using dpi_use_dsi_pll() to check if dsi pll is to be used, we
can just check if dpi.dsidev != NULL.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-05 11:17:39 +02:00
Tomi Valkeinen
a5b8399fb6 OMAPDSS: hide dss_select_dispc_clk_source()
dss.c currently exposes functions to configure the dispc source clock
and lcd source clock. There are configured separately from the output
drivers.

However, there is no safe way for the output drivers to handle dispc
clock, as it's shared between the outputs. Thus, if, say, the DSI driver
sets up DSI PLL and configures both the dispc and lcd clock sources to
that DSI PLL, the resulting dispc clock could be too low for, say, HDMI.

Thus the output drivers should really only be concerned about the lcd
clock, which is what the output drivers actually use. There's lot to do
to clean up the dss clock handling, but this patch takes one step
forward and removes the use of dss_select_dispc_clk_source() from the
output drivers.

After this patch, the output drivers only configure the lcd source
clock. On omap4+ the dispc src clock is never changed from the default
PRCM source. On omap3, where the dispc and lcd clocks are actually the
same, setting the lcd clock source sets the dispc clock source.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-05 11:17:39 +02:00
Tomi Valkeinen
13a1a2b2a6 OMAPDSS: setup default dss fck
We don't currently set the dss fck when starting up. This is not a
problem, as we setup the fck later when configuring the pixel clocks. Or
this is how it was for omap2, for the rest of the omaps this may not be
so.

For DSI, HDMI and also for DPI when using DSI PLL, we don't need to
change the dss fck, and thus it may be left unconfigured. Usually the
dss fck is already setup fine by default, but we can't trust this.

This patch sets the dss fck to maximum at probe time.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-05 11:14:05 +02:00
Tomi Valkeinen
930b027eb4 OMAPDSS: add dss_calc_clock_rates() back
dss_calc_clock_rates() was removed earlier as it was not used, but it is
needed for DSI PLL calculations, so this patch adds it back.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-05 11:14:05 +02:00
Tomi Valkeinen
7a98786caa OMAPDSS: DSI: workaround for HSDiv problem
It looks like on many OMAP versions powers for both HSClk and HSDiv to
be enabled to have a functional HSDiv.

This patch fixes the issue by forcing both powers on.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-05 11:14:05 +02:00
Tomi Valkeinen
b7f1fe541b OMAPDSS: DSI: skip odd dividers when pck >= 100MHz
The DSI PLL and HSDivider can be used to generate the pixel clock for
LCD overlay manager, which then goes to DPI output. On the DPI output
pin the voltage of the signal is shifted from the OMAP's internal
minimal voltage to 1.8V range. The shifting is not instant, and the
higher the clock frequency, the less time there is to shift the signal
to nominal voltage.

If the HSDivider's divider is greater than one and odd, the resulting
pixel clock does not have 50% duty cycle. For example, with a divider of
3, the duty cycle is 33%.

When combining high frequency (in the area of 140MHz+) and non-50% duty
cycle, it has been observed the the shifter does not have enough time to
shift the voltage enough, and this leads to bad signal which is rejected
by monitors.

As a workaround this patch makes the divider calculation skip all odd
dividers when the required pixel clock is over 100MHz. The limit of
100MHz is a guesstimate.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-05 11:14:05 +02:00
Tomi Valkeinen
046bc5751d OMAPDSS: fix DPI & DSI init order
DPI may use DSI PLL, so it depends on DSI. However, currently DPI driver
is added first, which causes DPI initialization to fail when it tries to
get the DSI PLL.

This patch changes the init order to fix this.

A better solution would be to separate DSI PLL and DSI drivers. They
have dependencies, though, but we could still have DSI PLL as an
independent entity that we could initialize before any of the output
drivers.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-05 11:14:04 +02:00
Tomi Valkeinen
9296dbd79e Merge branch '3.8/misc-2'
Merge omapdss miscellaneous patches.
2012-11-05 11:11:50 +02:00
Linus Walleij
c3b9d1db23 ARM: plat-nomadik: convert platforms to SPARSE_IRQ
This converts the Nomadik and Ux500 platforms to use SPARSE_IRQ.

Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-05 09:55:34 +01:00
Linus Walleij
a7238e4325 mfd/db8500-prcmu: use the irq_domain_add_simple()
To be able to use SPARSE_IRQ while yet not using device tree,
we need to use irq_domain_add_simple() that will allocate
descriptors for the IRQs in the non-DT case, and fall back
to using the linear irqdomain in the DT case.

Cc: Lee Jones <lee.jones@linaro.org>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-05 09:55:34 +01:00
Linus Walleij
f1d11f394f mfd/ab8500-core: use irq_domain_add_simple()
To be able to use SPARSE_IRQ while yet not using device tree,
we need to use irq_domain_add_simple() that will allocate
descriptors for the IRQs in the non-DT case, and fall back
to using the linear irqdomain in the DT case.

Cc: Lee Jones <lee.jones@linaro.org>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-05 09:55:33 +01:00
Linus Walleij
694e33a7f4 ARM: plat-nomadik: move MTU, kill plat-nomadik
This moves the MTU timer driver from arch/arm/plat-nomadik
to drivers/clocksource and moves the header file to the
platform_data directory.

As this moves the last file being compiled to an object out
of arch/arm/plat-nomadik, we have to "turn off the light"
and delete the plat-nomadik directory, because it is not
allowed to have an empty Makefile in a plat-* directory.
This is probably also a desired side effect of depopulating
the arch/arm directory of drivers. Luckily we have just
deleted all the <plat/*> include files prior to this so
by moving the last one we may delete the directory.

After this all the Ux500 and Nomadik device drivers live
outside of the arch/arm hierarchy.

Cc: Alessandro Rubini <rubini@unipv.it>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-05 09:55:33 +01:00
Linus Walleij
865fab601b ARM: plat-nomadik: move DMA40 header to <linux/platform_data>
This moves the DMA40 platform data header from <plat/ste_dma40.h>
to <linux/platform_data/dma-ste-dma40.h> where is belongs.

Cc: Dan Williams <djbw@fb.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Ola Lilja <ola.o.lilja@stericsson.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Andreas Westin <andreas.westin@stericsson.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-05 09:55:32 +01:00