commit d68318471a upstream.
Add put_bh() to decrease the refcount of 'bh' after the job
is finished, preventing a resource leak.
Fixes: 3f3b442b5a ("fs/ntfs3: Add bitmap")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 15df28699b upstream.
A regression was reported to me recently whereby /dev/fb0 had disappeared
from a PowerBook G3 Series "Wallstreet". The problem shows up when the
"video=ofonly" parameter is passed to the kernel, which is what the
bootloader does when "no video driver" is selected. The cause of the
problem is the "offb" string comparison, which got mangled when it got
refactored. Fix it.
Cc: stable@vger.kernel.org
Fixes: 93604a5ade ("fbdev: Handle video= parameter in video/cmdline.c")
Reported-and-tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0c43094f8c upstream.
The ready event list of an epoll object is protected by read-write
semaphore:
- The consumer (waiter) acquires the write lock and takes items.
- the producer (waker) takes the read lock and adds items.
The point of this design is enabling epoll to scale well with large number
of producers, as multiple producers can hold the read lock at the same
time.
Unfortunately, this implementation may cause scheduling priority inversion
problem. Suppose the consumer has higher scheduling priority than the
producer. The consumer needs to acquire the write lock, but may be blocked
by the producer holding the read lock. Since read-write semaphore does not
support priority-boosting for the readers (even with CONFIG_PREEMPT_RT=y),
we have a case of priority inversion: a higher priority consumer is blocked
by a lower priority producer. This problem was reported in [1].
Furthermore, this could also cause stall problem, as described in [2].
Fix this problem by replacing rwlock with spinlock.
This reduces the event bandwidth, as the producers now have to contend with
each other for the spinlock. According to the benchmark from
https://github.com/rouming/test-tools/blob/master/stress-epoll.c:
On 12 x86 CPUs:
Before After Diff
threads events/ms events/ms
8 7162 4956 -31%
16 8733 5383 -38%
32 7968 5572 -30%
64 10652 5739 -46%
128 11236 5931 -47%
On 4 riscv CPUs:
Before After Diff
threads events/ms events/ms
8 2958 2833 -4%
16 3323 3097 -7%
32 3451 3240 -6%
64 3554 3178 -11%
128 3601 3235 -10%
Although the numbers look bad, it should be noted that this benchmark
creates multiple threads who do nothing except constantly generating new
epoll events, thus contention on the spinlock is high. For real workload,
the event rate is likely much lower, and the performance drop is not as
bad.
Using another benchmark (perf bench epoll wait) where spinlock contention
is lower, improvement is even observed on x86:
On 12 x86 CPUs:
Before: Averaged 110279 operations/sec (+- 1.09%), total secs = 8
After: Averaged 114577 operations/sec (+- 2.25%), total secs = 8
On 4 riscv CPUs:
Before: Averaged 175767 operations/sec (+- 0.62%), total secs = 8
After: Averaged 167396 operations/sec (+- 0.23%), total secs = 8
In conclusion, no one is likely to be upset over this change. After all,
spinlock was used originally for years, and the commit which converted to
rwlock didn't mention a real workload, just that the benchmark numbers are
nice.
This patch is not exactly the revert of commit a218cc4914 ("epoll: use
rwlock in order to reduce ep_poll_callback() contention"), because git
revert conflicts in some places which are not obvious on the resolution.
This patch is intended to be backported, therefore go with the obvious
approach:
- Replace rwlock_t with spinlock_t one to one
- Delete list_add_tail_lockless() and chain_epi_lockless(). These were
introduced to allow producers to concurrently add items to the list.
But now that spinlock no longer allows producers to touch the event
list concurrently, these two functions are not necessary anymore.
Fixes: a218cc4914 ("epoll: use rwlock in order to reduce ep_poll_callback() contention")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/ec92458ea357ec503c737ead0f10b2c6e4c37d47.1752581388.git.namcao@linutronix.de
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: stable@vger.kernel.org
Reported-by: Frederic Weisbecker <frederic@kernel.org>
Closes: https://lore.kernel.org/linux-rt-users/20210825132754.GA895675@lothringen/ [1]
Reported-by: Valentin Schneider <vschneid@redhat.com>
Closes: https://lore.kernel.org/linux-rt-users/xhsmhttqvnall.mognet@vschneid.remote.csb/ [2]
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 21140e5caf upstream.
The dma_unmap_sg() functions should be called with the same nents as the
dma_map_sg(), not the value the map function returned.
Fixes: 57d67c6e82 ("crypto: rockchip - rework by using crypto_engine")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f5d643156e upstream.
It seems like everywhere in this file, dd->in_sg is mapped with
DMA_TO_DEVICE and dd->out_sg is mapped with DMA_FROM_DEVICE.
Fixes: 13802005d8 ("crypto: atmel - add Atmel DES/TDES driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 838d2d5151 upstream.
It seems like everywhere in this file, when the request is not
bidirectionala, req->src is mapped with DMA_TO_DEVICE and req->dst is
mapped with DMA_FROM_DEVICE.
Fixes: 62f58b1637 ("crypto: aspeed - add HACE crypto driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 69e5d50fcf upstream.
The cpufreq_cpu_put() call in update_qos_request() takes place too early
because the latter subsequently calls freq_qos_update_request() that
indirectly accesses the policy object in question through the QoS request
object passed to it.
Fortunately, update_qos_request() is called under intel_pstate_driver_lock,
so this issue does not matter for changing the intel_pstate operation
mode, but it theoretically can cause a crash to occur on CPU device hot
removal (which currently can only happen in virt, but it is formally
supported nevertheless).
Address this issue by modifying update_qos_request() to drop the
reference to the policy later.
Fixes: da5c504c7a ("cpufreq: intel_pstate: Implement QoS supported freq constraints")
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Zihuan Zhang <zhangzihuan@kylinos.cn>
Link: https://patch.msgid.link/2255671.irdbgypaU6@rafael.j.wysocki
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 04ff48239f upstream.
With the introduction of clone3 in commit 7f192e3cd3 ("fork: add
clone3") the effective bit width of clone_flags on all architectures was
increased from 32-bit to 64-bit. However, the signature of the copy_*
helper functions (e.g., copy_sighand) used by copy_process was not
adapted.
As such, they truncate the flags on any 32-bit architectures that
supports clone3 (arc, arm, csky, m68k, microblaze, mips32, openrisc,
parisc32, powerpc32, riscv32, x86-32 and xtensa).
For copy_sighand with CLONE_CLEAR_SIGHAND being an actual u64
constant, this triggers an observable bug in kernel selftest
clone3_clear_sighand:
if (clone_flags & CLONE_CLEAR_SIGHAND)
in function copy_sighand within fork.c will always fail given:
unsigned long /* == uint32_t */ clone_flags
#define CLONE_CLEAR_SIGHAND 0x100000000ULL
This commit fixes the bug by always passing clone_flags to copy_sighand
via their declared u64 type, invariant of architecture-dependent integer
sizes.
Fixes: b612e5df45 ("clone3: add CLONE_CLEAR_SIGHAND")
Cc: stable@vger.kernel.org # linux-5.5+
Signed-off-by: Simon Schuster <schuster.simon@siemens-energy.com>
Link: https://lore.kernel.org/20250901-nios2-implement-clone3-v2-1-53fcf5577d57@siemens-energy.com
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 57c8e9da3d upstream.
All the other ref clocks provided by this driver have the bi_tcxo
as parent. The eDP refclk is the only one without a parent, leading
to reporting its rate as 0. So set its parent to bi_tcxo, just like
the rest of the refclks.
Cc: stable@vger.kernel.org # v6.9
Fixes: 06aff11619 ("clk: qcom: Add TCSR clock driver for x1e80100")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250730-clk-qcom-tcsrcc-x1e80100-parent-edp-refclk-v1-1-7a36ef06e045@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d0856a6dff upstream.
In mhi_init_irq_setup, the device pointer used for dev_err() was not
initialized. Use the pointer from mhi_cntrl instead.
Fixes: b0fc0167f2 ("bus: mhi: core: Allow shared IRQ for event rings")
Fixes: 3000f85b8f ("bus: mhi: core: Add support for basic PM operations")
Signed-off-by: Adam Xue <zxue@semtech.com>
[mani: reworded subject/description and CCed stable]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250905174118.38512-1-zxue@semtech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f5225a34bd upstream.
The mhi_ep_read_channel function incorrectly assumes the End of Transfer
(EOT) bit is present for each packet in a chained transactions, causing
it to advance mhi_chan->rd_offset beyond wr_offset during host-to-device
transfers when EOT has not yet arrived. This leads to access of unmapped
host memory, causing IOMMU faults and processing of stale TREs.
Modify the loop condition to ensure mhi_queue is not empty, allowing the
function to process only valid TREs up to the current write pointer to
prevent premature reads and ensure safe traversal of chained TREs.
Due to this change, buf_left needs to be removed from the while loop
condition to avoid exiting prematurely before reading the ring completely,
and also remove write_offset since it will always be zero because the new
cache buffer is allocated every time.
Fixes: 5301258899 ("bus: mhi: ep: Add support for reading from the host")
Co-developed-by: Akhil Vinod <akhil.vinod@oss.qualcomm.com>
Signed-off-by: Akhil Vinod <akhil.vinod@oss.qualcomm.com>
Signed-off-by: Sumit Kumar <sumit.kumar@oss.qualcomm.com>
[mani: reworded description slightly]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250910-final_chained-v3-1-ec77c9d88ace@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dff4f9ff5d upstream.
The function btrfs_encode_fh() does not properly account for the three
cases it handles.
Before writing to the file handle (fh), the function only returns to the
user BTRFS_FID_SIZE_NON_CONNECTABLE (5 dwords, 20 bytes) or
BTRFS_FID_SIZE_CONNECTABLE (8 dwords, 32 bytes).
However, when a parent exists and the root ID of the parent and the
inode are different, the function writes BTRFS_FID_SIZE_CONNECTABLE_ROOT
(10 dwords, 40 bytes).
If *max_len is not large enough, this write goes out of bounds because
BTRFS_FID_SIZE_CONNECTABLE_ROOT is greater than
BTRFS_FID_SIZE_CONNECTABLE originally returned.
This results in an 8-byte out-of-bounds write at
fid->parent_root_objectid = parent_root_id.
A previous attempt to fix this issue was made but was lost.
https://lore.kernel.org/all/4CADAEEC020000780001B32C@vpn.id2.novell.com/
Although this issue does not seem to be easily triggerable, it is a
potential memory corruption bug that should be fixed. This patch
resolves the issue by ensuring the function returns the appropriate size
for all three cases and validates that *max_len is large enough before
writing any data.
Fixes: be6e8dc0ba ("NFS support for btrfs - v3")
CC: stable@vger.kernel.org # 3.0+
Signed-off-by: Anderson Nascimento <anderson@allelesecurity.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 06d712d297 upstream.
trace_block_split() is missing, resulting in blktrace inability to catch
BIO split events and making it harder to analyze the BIO sequence.
Cc: stable@vger.kernel.org
Fixes: 488f6682c8 ("block: blk-crypto-fallback for Inline Encryption")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5949e7c489 upstream.
[WHAT]
Since dcn35, DTBCLK can be disabled when no DP2 sink connected for
power saving purpose.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2d1684a077 upstream.
Currently this is hidden behind perfmon_capable() since this is
technically an info leak, given that this is a system wide metric.
However the granularity reported here is always PAGE_SIZE aligned, which
matches what the core kernel is already willing to expose to userspace
if querying how many free RAM pages there are on the system, and that
doesn't need any special privileges. In addition other drm drivers seem
happy to expose this.
The motivation here if with oneAPI where they want to use the system
wide 'used' reporting here, so not the per-client fdinfo stats. This has
also come up with some perf overlay applications wanting this
information.
Fixes: 1105ac15d2 ("drm/xe/uapi: restrict system wide accounting")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Joshua Santosh <joshua.santosh.ranjan@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250919122052.420979-2-matthew.auld@intel.com
(cherry picked from commit 4d0b035fd6)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e4bea91958 upstream.
In `nouveau_bo_move_prep`, if `nouveau_mem_map` fails, an error code
should be returned. Currently, it returns zero even if vmm addr is not
correctly mapped.
Cc: stable@vger.kernel.org
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Shuhao Fu <sfual@cse.ust.hk>
Fixes: 9ce523cc3b ("drm/nouveau: separate buffer object backing memory from nvkm structures")
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d83f1d19c8 upstream.
Remove fixed PPI lane count setup. The R-Car DSI host is capable
of operating in 1..4 DSI lane mode. Remove the hard-coded 4-lane
configuration from PPI register settings and instead configure
the PPI lane count according to lane count information already
obtained by this driver instance.
Configure TXSETR register to match PPI lane count. The R-Car V4H
Reference Manual R19UH0186EJ0121 Rev.1.21 section 67.2.2.3 Tx Set
Register (TXSETR), field LANECNT description indicates that the
TXSETR register LANECNT bitfield lane count must be configured
such, that it matches lane count configuration in PPISETR register
DLEN bitfield. Make sure the LANECNT and DLEN bitfields are
configured to match.
Fixes: 155358310f ("drm: rcar-du: Add R-Car DSI driver")
Cc: stable@vger.kernel.org
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250813210840.97621-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ca2a6abdae upstream.
When bailing out due to group_priority_permit() failure, the queue_args
need to be freed. Fix it by rearranging the function to use the
goto-on-error pattern, such that the success case flows straight without
indentation while error cases jump forward to cleanup.
Cc: stable@vger.kernel.org
Fixes: 5f7762042f ("drm/panthor: Restrict high priorities on group_create")
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20241113-panthor-fix-gcq-bailout-v1-1-654307254d68@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4f4098c57e upstream.
When cdev_device_add() failed, calling put_device() to explicitly
release dev->lirc_dev. Otherwise, it could cause the fault of the
reference count.
Found by code review.
Cc: stable@vger.kernel.org
Fixes: a6ddd4fecb ("media: lirc: remove last remnants of lirc kapi")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3e743cd0a7 upstream.
We don't use OF ports and remote-endpoints to connect the CSI2RX bridge
and this device in the device tree, thus it is wrong to use
v4l2_create_fwnode_links_to_pad() to create the media graph link between
the two.
It works out on accident, as neither the source nor the sink implement
the .get_fwnode_pad() callback, and the framework helper falls back on
using the first source and sink pads to create the link between them.
Instead, manually create the media link from the first source pad of the
bridge to the first sink pad of the J721E CSI2RX.
Fixes: b4a3d877dc ("media: ti: Add CSI2RX support for J721E")
Cc: stable@vger.kernel.org
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Tested-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com> (on SK-AM68)
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 072799db23 upstream.
Ensure that we clean up the platform bus when we remove this driver.
This fixes a crash seen when reloading the module for the child device
with the parent not yet reloaded.
Fixes: b4a3d877dc ("media: ti: Add CSI2RX support for J721E")
Cc: stable@vger.kernel.org
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Tested-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com> (on SK-AM68)
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4bd8a61476 upstream.
The vivid driver supports the <Vendor Command With ID> message,
but if the Vendor ID of the received message didn't match the Vendor ID
of the CEC Adapter, then it ignores it (good) and returns 0 (bad).
It should return -ENOMSG to indicate that other followers should be
asked to handle it. Return code 0 means that the driver handled it,
which is wrong in this case.
As a result, userspace followers never get the chance to process such a
message.
Refactor the code a bit to have the function return -ENOMSG at the end,
drop the default case, and ensure that the message handlers return 0.
That way 0 is only returned if the message is actually handled in the
vivid_received() function.
Fixes: 812765cd69 ("media: vivid: add <Vendor Command With ID> support")
Cc: stable@vger.kernel.org
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 93f213b444 upstream.
When starting venus with the "no_tz" code path, IRIS2 needs the same
boot/reset sequence as IRIS2_1. This is because most of the registers were
moved to the "wrapper_tz_base", which is already defined for both IRIS2 and
IRIS2_1 inside core.c. Add IRIS2 to the checks inside firmware.c as well to
make sure that it uses the correct reset sequence.
Both IRIS2 and IRIS2_1 are HFI v6 variants, so the correct sequence was
used before commit c38610f898 ("media: venus: firmware: Sanitize
per-VPU-version").
Fixes: c38610f898 ("media: venus: firmware: Sanitize per-VPU-version")
Cc: stable@vger.kernel.org
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Reviewed-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
[bod: Fixed commit log IRIS -> IRIS2]
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7fa37ba25a upstream.
The s5p_mfc_cmd_args structure in the v6 driver is never used, not
initialized to anything other than zero, but as of clang-21 this
causes a warning:
drivers/media/platform/samsung/s5p-mfc/s5p_mfc_cmd_v6.c:45:7: error: variable 'h2r_args' is uninitialized when passed as a const pointer argument here [-Werror,-Wuninitialized-const-pointer]
45 | &h2r_args);
| ^~~~~~~~
Just remove this for simplicity. Since the function is also called
through a callback, this does require adding a trivial wrapper with
the correct prototype.
Fixes: f96f3cfa0b ("[media] s5p-mfc: Update MFC v4l2 driver to support MFC6.x")
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c0d3f6969b upstream.
Fix potential leak of uninitialized stack data to userspace by ensuring
that the `scan` structure is zeroed before use.
Fixes: 0ab13674a9 ("media: pci: mgb4: Added Digiteq Automotive MGB4 driver")
Cc: stable@vger.kernel.org
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1069a4fe63 upstream.
The DMA map functions can fail and should be tested for errors.
If the mapping fails, free blanking_ptr and set it to 0. As 0 is a
valid DMA address, use blanking_ptr to test if the DMA address
is set.
Fixes: 1a0adaf37c ("V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eec8125021 upstream.
Commit b3decc5ce7 ("media: mc: Expand MUST_CONNECT flag to always
require an enabled link") expanded the meaning of the MUST_CONNECT flag
to require an enabled link in all cases. To do so, the link exploration
code was expanded to cover unconnected pads, in order to reject those
that have the MUST_CONNECT flag set. The implementation was however
incorrect, ignoring unconnected pads instead of ignoring connected pads.
Fix it.
Reported-by: Martin Kepplinger-Novaković <martink@posteo.de>
Closes: https://lore.kernel.org/linux-media/20250205172957.182362-1-martink@posteo.de
Reported-by: Maud Spierings <maudspierings@gocontroll.com>
Closes: https://lore.kernel.org/linux-media/20250818-imx8_isi-v1-1-e9cfe994c435@gocontroll.com
Fixes: b3decc5ce7 ("media: mc: Expand MUST_CONNECT flag to always require an enabled link")
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Maud Spierings <maudspierings@gocontroll.com>
Tested-by: Martin Kepplinger-Novaković <martink@posteo.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bacd713145 upstream.
Change "ret" from unsigned int to int type in mt9v111_calc_frame_rate()
to store negative error codes or zero returned by __mt9v111_hw_reset()
and other functions.
Storing the negative error codes in unsigned type, doesn't cause an issue
at runtime but it's ugly as pants.
No effect on runtime.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Fixes: aab7ed1c39 ("media: i2c: Add driver for Aptina MT9V111")
Cc: stable@vger.kernel.org
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 23b53639a7 upstream.
The DMA map functions can fail and should be tested for errors.
If the mapping fails, dealloc buffers, and return.
Fixes: 1c1e45d17b ("V4L/DVB (7786): cx18: new driver for the Conexant CX23418 MPEG encoder chip")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d5d12cc03e upstream.
Delete the external-module style Makefile commands. They are not needed
for in-tree modules.
This is the only Makefile in the kernel tree (aside from tools/ and
samples/) that uses this Makefile style.
The same files are built with or without this patch.
Fixes: 056f2821b6 ("media: cec: extron-da-hd-4k-plus: add the Extron DA HD 4K Plus CEC driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: stable@vger.kernel.org
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8ece3173f8 upstream.
Make sure to drop the reference to the secure monitor device taken by
of_find_device_by_node() when looking up its driver data on behalf of
other drivers (e.g. during probe).
Note that holding a reference to the platform device does not prevent
its driver data from going away so there is no point in keeping the
reference after the helper returns.
Fixes: 8cde3c2153 ("firmware: meson_sm: Rework driver as a proper platform driver")
Cc: stable@vger.kernel.org # 5.5
Cc: Carlo Caione <ccaione@baylibre.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20250725074019.8765-1-johan@kernel.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3fcc8e1469 upstream.
VIRQs come in 3 flavors, per-VPU, per-domain, and global, and the VIRQs
are tracked in per-cpu virq_to_irq arrays.
Per-domain and global VIRQs must be bound on CPU 0, and
bind_virq_to_irq() sets the per_cpu virq_to_irq at registration time
Later, the interrupt can migrate, and info->cpu is updated. When
calling __unbind_from_irq(), the per-cpu virq_to_irq is cleared for a
different cpu. If bind_virq_to_irq() is called again with CPU 0, the
stale irq is returned. There won't be any irq_info for the irq, so
things break.
Make xen_rebind_evtchn_to_cpu() update the per_cpu virq_to_irq mappings
to keep them update to date with the current cpu. This ensures the
correct virq_to_irq is cleared in __unbind_from_irq().
Fixes: e46cdb66c8 ("xen: event channels")
Cc: stable@vger.kernel.org
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250828003604.8949-4-jason.andryuk@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 07ce121d93 upstream.
Change find_virq() to return -EEXIST when a VIRQ is bound to a
different CPU than the one passed in. With that, remove the BUG_ON()
from bind_virq_to_irq() to propogate the error upwards.
Some VIRQs are per-cpu, but others are per-domain or global. Those must
be bound to CPU0 and can then migrate elsewhere. The lookup for
per-domain and global will probably fail when migrated off CPU 0,
especially when the current CPU is tracked. This now returns -EEXIST
instead of BUG_ON().
A second call to bind a per-domain or global VIRQ is not expected, but
make it non-fatal to avoid trying to look up the irq, since we don't
know which per_cpu(virq_to_irq) it will be in.
Cc: stable@vger.kernel.org
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250828003604.8949-3-jason.andryuk@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f770c3d858 upstream.
The device power management API has the following asymmetry:
* dpm_suspend_start() does not clean up on failure
(it requires a call to dpm_resume_end())
* dpm_suspend_end() does clean up on failure
(it does not require a call to dpm_resume_start())
The asymmetry was introduced by commit d8f3de0d24 ("Suspend-related
patches for 2.6.27") in June 2008: It removed a call to device_resume()
from device_suspend() (which was later renamed to dpm_suspend_start()).
When Xen began using the device power management API in May 2008 with
commit 0e91398f2a ("xen: implement save/restore"), the asymmetry did
not yet exist. But since it was introduced, a call to dpm_resume_end()
is missing in the error path of dpm_suspend_start(). Fix it.
Fixes: d8f3de0d24 ("Suspend-related patches for 2.6.27")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v2.6.27
Reviewed-by: "Rafael J. Wysocki (Intel)" <rafael@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <22453676d1ddcebbe81641bb68ddf587fee7e21e.1756990799.git.lukas@wunner.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 08df2d7dd4 upstream.
rc is overwritten by the evtchn_status hypercall in each iteration, so
the return value will be whatever the last iteration is. This could
incorrectly return success even if the event channel was not found.
Change to an explicit -ENOENT for an un-found virq and return 0 on a
successful match.
Fixes: 62cc5fc7b2 ("xen/pv-on-hvm kexec: rebind virqs to existing eventchannel ports")
Cc: stable@vger.kernel.org
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250828003604.8949-2-jason.andryuk@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c254815b02 upstream.
There are variants of the Rockchip Innosilicon CSI DPHY (e.g., the RK3568
variant) that are powered on by default as they are part of the ALIVE power
domain.
Remove 'power-domains' from the required properties in order to avoid false
positives.
Fixes: 22c8e0a69b ("dt-bindings: phy: add compatible for rk356x to rockchip-inno-csi-dphy")
Cc: stable@kernel.org
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Michael Riesch <michael.riesch@collabora.com>
Link: https://lore.kernel.org/r/20250616-rk3588-csi-dphy-v4-2-a4f340a7f0cf@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b3fe1c83a5 upstream.
CMN S3's DTM offset is different between r0px and r1p0, and it
turns out this was not a error in the earlier documentation, but
does actually exist in the design. Lovely.
Cc: stable@vger.kernel.org
Fixes: 0dc2f4963f ("perf/arm-cmn: Support CMN S3")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8a6506e1ba upstream.
There is an issue possible where TI AM33xx SoCs do not boot properly after
a reset if EMU0/EMU1 pins were used as GPIO and have been driving low level
actively prior to reset [1].
"Advisory 1.0.36 EMU0 and EMU1: Terminals Must be Pulled High Before
ICEPick Samples
The state of the EMU[1:0] terminals are latched during reset to determine
ICEPick boot mode. For normal device operation, these terminals must be
pulled up to a valid high logic level ( > VIH min) before ICEPick samples
the state of these terminals, which occurs
[five CLK_M_OSC clock cycles - 10 ns] after the falling edge of WARMRSTn.
Many applications may not require the secondary GPIO function of the
EMU[1:0] terminals. In this case, they would only be connected to pull-up
resistors, which ensures they are always high when ICEPick samples.
However, some applications may need to use these terminals as GPIO where
they could be driven low before reset is asserted. This usage of the
EMU[1:0] terminals may require special attention to ensure the terminals
are allowed to return to a valid high-logic level before ICEPick samples
the state of these terminals.
When any device reset is asserted, the pin mux mode of EMU[1:0] terminals
configured to operate as GPIO (mode 7) will change back to EMU input
(mode 0) on the falling edge of WARMRSTn. This only provides a short period
of time for the terminals to return high if driven low before reset is
asserted...
If the EMU[1:0] terminals are configured to operate as GPIO, the product
should be designed such these terminals can be pulled to a valid high-logic
level within 190 ns after the falling edge of WARMRSTn."
We've noticed this problem with custom am335x hardware in combination with
recently implemented cold reset method
(commit 6521f6a195 ("ARM: AM33xx: PRM: Implement REBOOT_COLD")).
It looks like the problem can affect other HW, for instance AM335x
Chiliboard, because the latter has LEDs on GPIO3_7/GPIO3_8 as well.
One option would be to check if the pins are in GPIO mode and either switch
to output active high, or switch to input and poll until the external
pull-ups have brought the pins to the desired high state. But fighting
with GPIO driver for these pins is probably not the most straight forward
approch in a reboot handler.
Fortunately we can easily control pinmuxing here and rely on the external
pull-ups. TI recommends 4k7 external pull up resistors [2] and even with
quite conservative estimation for pin capacity (1 uF should never happen)
the required delay shall not exceed 5ms.
[1] Link: https://www.ti.com/lit/pdf/sprz360
[2] Link: https://e2e.ti.com/support/processors-group/processors/f/processors-forum/866346/am3352-emu-1-0-questions
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Link: https://lore.kernel.org/r/20250717152708.487891-1-alexander.sverdlin@siemens.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 195a1b7d83 upstream.
The kprobe page is allocated by execmem allocator with ROX permission.
It needs to call set_memory_rox() to set proper permission for the
direct map too. It was missed.
Fixes: 10d5e97c1b ("arm64: use PAGE_KERNEL_ROX directly in alloc_insn_page")
Cc: <stable@vger.kernel.org>
Signed-off-by: Yang Shi <yang@os.amperecomputing.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4c4e48afb6 upstream.
The main pad configuration register region starts with the register
MAIN_PADCFG_CTRL_MMR_CFG0_PADCONFIG0 with address 0x000f4000 and ends
with the MAIN_PADCFG_CTRL_MMR_CFG0_PADCONFIG150 register with address
0x000f4258, as a result of which, total size of the region is 0x25c
instead of 0x2ac.
Reference Docs
TRM (AM62A) - https://www.ti.com/lit/ug/spruj16b/spruj16b.pdf
TRM (AM62D) - https://www.ti.com/lit/ug/sprujd4/sprujd4.pdf
Fixes: 5fc6b1b626 ("arm64: dts: ti: Introduce AM62A7 family of SoCs")
Cc: stable@vger.kernel.org
Signed-off-by: Vibhore Vardhan <vibhore@ti.com>
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://patch.msgid.link/20250903062513.813925-2-p-bhagat@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b9a185198f upstream.
pm8010 is a camera specific PMIC, and may not be present on some
devices. These may instead use a dedicated vreg for this purpose (Dell
XPS 9345, Dell Inspiron..) or use USB webcam instead of a MIPI one
alltogether (Lenovo Thinbook 16, Lenovo Yoga..).
Disable pm8010 by default, let platforms that actually have one onboard
enable it instead.
Cc: stable@vger.kernel.org
Fixes: 2559e61e7e ("arm64: dts: qcom: x1e80100-pmics: Add the missing PMICs")
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Link: https://lore.kernel.org/r/20250701183625.1968246-2-alex.vinarskis@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 316294bb66 upstream.
Reading the hardware registers of the &slimbam on RB3 reveals that the BAM
supports only 23 pipes (channels) and supports 4 EEs instead of 2. This
hasn't caused problems so far since nothing is using the extra channels,
but attempting to use them would lead to crashes.
The bam_dma driver might warn in the future if the num-channels in the DT
are wrong, so correct the properties in the DT to avoid future regressions.
Cc: stable@vger.kernel.org
Fixes: 27ca1de07d ("arm64: dts: qcom: sdm845: add slimbus nodes")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250821-sdm845-slimbam-channels-v1-1-498f7d46b9ee@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f73c82c855 upstream.
On most MSM8939 devices, the bootloader already initializes the display to
show the boot splash screen. In this situation, MDSS is already configured
and left running when starting Linux. To avoid side effects from the
bootloader configuration, the MDSS reset can be specified in the device
tree to start again with a clean hardware state.
The reset for MDSS is currently missing in msm8939.dtsi, which causes
errors when the MDSS driver tries to re-initialize the registers:
dsi_err_worker: status=6
dsi_err_worker: status=6
dsi_err_worker: status=6
...
It turns out that we have always indirectly worked around this by building
the MDSS driver as a module. Before v6.17, the power domain was temporarily
turned off until the module was loaded, long enough to clear the register
contents. In v6.17, power domains are not turned off during boot until
sync_state() happens, so this is no longer working. Even before v6.17 this
resulted in broken behavior, but notably only when the MDSS driver was
built-in instead of a module.
Cc: stable@vger.kernel.org
Fixes: 61550c6c15 ("arm64: dts: qcom: Add msm8939 SoC")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250915-msm8916-resets-v1-2-a5c705df0c45@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 99b78773c2 upstream.
On most MSM8916 devices (aside from the DragonBoard 410c), the bootloader
already initializes the display to show the boot splash screen. In this
situation, MDSS is already configured and left running when starting Linux.
To avoid side effects from the bootloader configuration, the MDSS reset can
be specified in the device tree to start again with a clean hardware state.
The reset for MDSS is currently missing in msm8916.dtsi, which causes
errors when the MDSS driver tries to re-initialize the registers:
dsi_err_worker: status=6
dsi_err_worker: status=6
dsi_err_worker: status=6
...
It turns out that we have always indirectly worked around this by building
the MDSS driver as a module. Before v6.17, the power domain was temporarily
turned off until the module was loaded, long enough to clear the register
contents. In v6.17, power domains are not turned off during boot until
sync_state() happens, so this is no longer working. Even before v6.17 this
resulted in broken behavior, but notably only when the MDSS driver was
built-in instead of a module.
Cc: stable@vger.kernel.org
Fixes: 305410ffd1 ("arm64: dts: msm8916: Add display support")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250915-msm8916-resets-v1-1-a5c705df0c45@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 496f9372ea upstream.
In the ACPI debugger interface, the helper functions for read and write
operations use "int" as the length parameter data type. When a large
"size_t count" is passed from the file operations, this cast to "int"
results in truncation and a negative value due to signed integer
representation.
Logically, this negative number propagates to the min() calculation,
where it is selected over the positive buffer space value, leading to
unexpected behavior. Subsequently, when this negative value is used in
copy_to_user() or copy_from_user(), it is interpreted as a large positive
value due to the unsigned nature of the size parameter in these functions,
causing the copy operations to attempt handling sizes far beyond the
intended buffer limits.
Address the issue by:
- Changing the length parameters in acpi_aml_read_user() and
acpi_aml_write_user() from "int" to "size_t", aligning with the
expected unsigned size semantics.
- Updating return types and local variables in acpi_aml_read() and
acpi_aml_write() to "ssize_t" for consistency with kernel file
operation conventions.
- Using "size_t" for the "n" variable to ensure calculations remain
unsigned.
- Using min_t() for circ_count_to_end() and circ_space_to_end() to
ensure type-safe comparisons and prevent integer overflow.
Signed-off-by: Amir Mohammad Jahangirzad <a.jahangirzad@gmail.com>
Link: https://patch.msgid.link/20250923013113.20615-1-a.jahangirzad@gmail.com
[ rjw: Changelog tweaks, local variable definitions ordering adjustments ]
Fixes: 8cfb0cdf07 ("ACPI / debugger: Add IO interface to access debugger functionalities")
Cc: 4.5+ <stable@vger.kernel.org> # 4.5+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d0759b1098 upstream.
The ACPI handle passed to acpi_extract_properties() as the first
argument represents the ACPI namespace scope in which to look for
objects returning buffers associated with buffer properties.
For _DSD objects located immediately under ACPI devices, this handle is
the same as the handle of the device object holding the _DSD, but for
data-only subnodes it is not so.
First of all, data-only subnodes are represented by objects that
cannot hold other objects in their scopes (like control methods).
Therefore a data-only subnode handle cannot be used for completing
relative pathname segments, so the current code in
in acpi_nondev_subnode_extract() passing a data-only subnode handle
to acpi_extract_properties() is invalid.
Moreover, a data-only subnode of device A may be represented by an
object located in the scope of device B (which kind of makes sense,
for instance, if A is a B's child). In that case, the scope in
question would be the one of device B. In other words, the scope
mentioned above is the same as the scope used for subnode object
lookup in acpi_nondev_subnode_extract().
Accordingly, rearrange that function to use the same scope for the
extraction of properties and subnode object lookup.
Fixes: 103e10c69c ("ACPI: property: Add support for parsing buffer property UUID")
Cc: 6.0+ <stable@vger.kernel.org> # 6.0+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9338d660b7 ]
When building s390 defconfig with binutils older than 2.32, there are
several warnings during the final linking stage:
s390-linux-ld: .tmp_vmlinux1: warning: allocated section `.got.plt' not in segment
s390-linux-ld: .tmp_vmlinux2: warning: allocated section `.got.plt' not in segment
s390-linux-ld: vmlinux.unstripped: warning: allocated section `.got.plt' not in segment
s390-linux-objcopy: vmlinux: warning: allocated section `.got.plt' not in segment
s390-linux-objcopy: st7afZyb: warning: allocated section `.got.plt' not in segment
binutils commit afca762f598 ("S/390: Improve partial relro support for
64 bit") [1] in 2.32 changed where .got.plt is emitted, avoiding the
warning.
The :NONE in the .vmlinux.info output section description changes the
segment for subsequent allocated sections. Move .vmlinux.info right
above the discards section to place all other sections in the previously
defined segment, .data.
Fixes: 30226853d6 ("s390: vmlinux.lds.S: explicitly handle '.got' and '.plt' sections")
Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=afca762f598d453c563f244cd3777715b1a0cb72 [1]
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Acked-by: Alexey Gladkov <legion@kernel.org>
Acked-by: Nicolas Schier <nsc@kernel.org>
Link: https://patch.msgid.link/20251008-kbuild-fix-modinfo-regressions-v1-3-9fc776c5887c@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8d18ef04f9 ]
In the upcoming changes, the ELF_DETAILS macro will be extended with
the ".modinfo" section, which will cause an error:
>> s390x-linux-ld: .tmp_vmlinux1: warning: allocated section `.modinfo' not in segment
>> s390x-linux-ld: .tmp_vmlinux2: warning: allocated section `.modinfo' not in segment
>> s390x-linux-ld: vmlinux.unstripped: warning: allocated section `.modinfo' not in segment
This happens because the .vmlinux.info use :NONE to override the default
segment and tell the linker to not put the section in any segment at all.
To avoid this, we need to change the sections order that will be placed
in the default segment.
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: linux-s390@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506062053.zbkFBEnJ-lkp@intel.com/
Signed-off-by: Alexey Gladkov <legion@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://patch.msgid.link/20d40a7a3a053ba06a54155e777dcde7fdada1db.1758182101.git.legion@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Stable-dep-of: 9338d660b7 ("s390/vmlinux.lds.S: Move .vmlinux.info to end of allocatable sections")
Signed-off-by: Sasha Levin <sashal@kernel.org>