Commit graph

752,023 commits

Author SHA1 Message Date
Yingying Tang
802ca33549 ath10k: enable TDLS peer buffer STA feature
Enable TDLS peer buffer STA feature.
QCA6174 firmware(version: WLAN.RM.4.4) support TDLS peer buffer STA,
it reports this capability through wmi service map in wmi service ready
event. Set related parameter in TDLS WMI command to enable this feature.

Signed-off-by: Yingying Tang <yintang@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29 11:59:58 +03:00
Daniel Mack
f276ba06e8 wcn36xx: dequeue all pending indicator messages
In case wcn36xx_smd_rsp_process() is called more than once before
hal_ind_work was dispatched, the messages will end up in hal_ind_queue,
but wcn36xx_ind_smd_work() will only look at the first message in that
list.

Fix this by dequeing the messages from the list in a loop, and only stop
when it's empty.

This issue was found during a review of the driver. In my tests, that
race never actually occured.

Signed-off-by: Daniel Mack <daniel@zonque.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29 11:58:44 +03:00
Loic Poulain
e5f9908155 wcn36xx: Fix firmware crash due to corrupted buffer address
wcn36xx_start_tx function retrieves the buffer descriptor from the
channel control queue to start filling tx buffer information. However,
nothing prevents this same buffer to be concurrently accessed in a
concurent tx call, leading to potential buffer coruption and firmware
crash (observed during iperf test). The channel control queue should
only be accessed and updated with the channel lock.

Fix this issue by using a local buffer descriptor which will be copied
in the thread-safe wcn36xx_dxe_tx_frame.

Note that buffer descriptor size is few bytes so the introduced copy
overhead is insignificant. Moreover, this allows to keep the locked
section minimal.

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Ramon Fried <rfried@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29 11:57:19 +03:00
Ramon Fried
ee35eecb08 wcn36xx: turn off probe response offloading
It appears that the WCN36xx firmware doesn't actually respond to
probe requests. Until it's resolved, switch the probe response
responsibility to the 802.11 layer to allow creation of
hidden SSID AP's.

Signed-off-by: Ramon Fried <rfried@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29 11:56:13 +03:00
Anilkumar Kolli
219cc084c6 ath10k: add memory dump support QCA9984
QCA9984/QCA99X0/QCA4019 chipsets have 8 memory regions, dump all of them to the
firmware coredump file. Some of the regions need to be read using ioread() so
add new region types for them.

Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
[kvalo: refactoring etc]
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29 11:54:32 +03:00
Kalle Valo
10c2288430 ath10k: refactor ath10k_pci_dump_memory() in preparation for QCA9984 support
As QCA9984 needs two region types refactor the code to make it easier add the
new types. No functional changes.

Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29 11:54:25 +03:00
Sathishkumar Muruganandam
606204bb86 ath10k: suppress "Unknown eventid: 36925" warnings
FW has Smart Logging feature enabled by default for detecting failures
and processing FATAL_CONDITION_EVENTID (36925 - 0x903D) back to host.

Since ath10k doesn't implement the Smart Logging and FATAL CONDITION
EVENT processing yet, suppressing the unknown event ID warning by moving
this under ATH10K_DBG_WMI.

Simulated the same issue by having associated STA powered off when
ping flood was running from AP backbone. This triggerd STA KICKOUT
in AP followed by FATAL CONDITION event 36925.

Issue was reproduced and verified in below DUT
------------------------------------------------
AP mode of OpenWRT QCA9984 running 6.0.8 with FW ver 10.4-3.5.3-00053

Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29 11:53:19 +03:00
Ryan Hsu
e3814bec38 ath10k: add FW API 6 firmware image for QCA9377
Firmware WLAN.TF.2.1-00014-QCARMSWP-1 now supports reading the board ID
information and also required 9 IRAM bank, which older ath10k version
don't have the support will fail to be enabled, so in order to maintain
the backward compatibility, we need to update the FW API to 6.

Signed-off-by: Ryan Hsu <ryanhsu@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29 11:51:20 +03:00
Ryan Hsu
e98199a8c2 ath10k: enable QCA6174/QCA9377 to read the chip temperature
The firmware of QCA6174/QCA9377 already support the feature, just enable
it to be able to handle the get_temperature command and process the event.

You can read the temperature by using the hwmon interface,

cat /sys/class/ieee80211/phy*/device/hwmon/hwmon2/temp1_input

Verified with the following hardware and software combination,
QCA6174, only firmware-4.bin doesn't support this, otherwise all support.
QCA9377, all the firmwares upstreamed support this command

Signed-off-by: Ryan Hsu <ryanhsu@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29 11:51:14 +03:00
Karthikeyan Periyasamy
55cc11da69 Revert "ath10k: send (re)assoc peer command when NSS changed"
This reverts commit 55884c045d.

When Ath10k is in AP mode and an unassociated STA sends a VHT action frame
(Operating Mode Notification for the NSS change) periodically to AP this causes
ath10k to call ath10k_station_assoc() which sends WMI_PEER_ASSOC_CMDID during
NSS update. Over the time (with a certain client it can happen within 15 mins
when there are over 500 of these VHT action frames) continuous calls of
WMI_PEER_ASSOC_CMDID cause firmware to assert due to resource exhaust.

To my knowledge setting WMI_PEER_NSS peer param itself enough to handle NSS
updates and no need to call ath10k_station_assoc(). So revert the original
commit from 2014 as it's unclear why the change was really needed.
Now the firmware assert doesn't happen anymore.

Issue observed in QCA9984 platform with firmware version:10.4-3.5.3-00053.
This Change tested in QCA9984 with firmware version: 10.4-3.5.3-00053 and
QCA988x platform with firmware version: 10.2.4-1.0-00036.

Firmware Assert log:

ath10k_pci 0002:01:00.0: firmware crashed! (guid e61f1274-9acd-4c5b-bcca-e032ea6e723c)
ath10k_pci 0002:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
ath10k_pci 0002:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 1 testmode 1
ath10k_pci 0002:01:00.0: firmware ver 10.4-3.5.3-00053 api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast crc32 4c56a386
ath10k_pci 0002:01:00.0: board_file api 2 bmi_id 0:4 crc32 c2271344
ath10k_pci 0002:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal otp max-sta 512 raw 0 hwcrypto 1
ath10k_pci 0002:01:00.0: firmware register dump:
ath10k_pci 0002:01:00.0: [00]: 0x0000000A 0x000015B3 0x00981E5F 0x00975B31
ath10k_pci 0002:01:00.0: [04]: 0x00981E5F 0x00060530 0x00000011 0x00446C60
ath10k_pci 0002:01:00.0: [08]: 0x0042F1FC 0x00458080 0x00000017 0x00000000
ath10k_pci 0002:01:00.0: [12]: 0x00000009 0x00000000 0x00973ABC 0x00973AD2
ath10k_pci 0002:01:00.0: [16]: 0x00973AB0 0x00960E62 0x009606CA 0x00000000
ath10k_pci 0002:01:00.0: [20]: 0x40981E5F 0x004066DC 0x00400000 0x00981E34
ath10k_pci 0002:01:00.0: [24]: 0x80983B48 0x0040673C 0x000000C0 0xC0981E5F
ath10k_pci 0002:01:00.0: [28]: 0x80993DEB 0x0040676C 0x00431AB8 0x0045D0C4
ath10k_pci 0002:01:00.0: [32]: 0x80993E5C 0x004067AC 0x004303C0 0x0045D0C4
ath10k_pci 0002:01:00.0: [36]: 0x80994AAB 0x004067DC 0x00000000 0x0045D0C4
ath10k_pci 0002:01:00.0: [40]: 0x809971A0 0x0040681C 0x004303C0 0x00441B00
ath10k_pci 0002:01:00.0: [44]: 0x80991904 0x0040688C 0x004303C0 0x0045D0C4
ath10k_pci 0002:01:00.0: [48]: 0x80963AD3 0x00406A7C 0x004303C0 0x009918FC
ath10k_pci 0002:01:00.0: [52]: 0x80960E80 0x00406A9C 0x0000001F 0x00400000
ath10k_pci 0002:01:00.0: [56]: 0x80960E51 0x00406ACC 0x00400000 0x00000000
ath10k_pci 0002:01:00.0: Copy Engine register dump:
ath10k_pci 0002:01:00.0: index: addr: sr_wr_idx: sr_r_idx: dst_wr_idx: dst_r_idx:
ath10k_pci 0002:01:00.0: [00]: 0x0004a000 15 15 3 3
ath10k_pci 0002:01:00.0: [01]: 0x0004a400 17 17 212 213
ath10k_pci 0002:01:00.0: [02]: 0x0004a800 21 21 20 21
ath10k_pci 0002:01:00.0: [03]: 0x0004ac00 25 25 27 25
ath10k_pci 0002:01:00.0: [04]: 0x0004b000 515 515 144 104
ath10k_pci 0002:01:00.0: [05]: 0x0004b400 28 28 155 156
ath10k_pci 0002:01:00.0: [06]: 0x0004b800 12 12 12 12
ath10k_pci 0002:01:00.0: [07]: 0x0004bc00 1 1 1 1
ath10k_pci 0002:01:00.0: [08]: 0x0004c000 0 0 127 0
ath10k_pci 0002:01:00.0: [09]: 0x0004c400 1 1 1 1
ath10k_pci 0002:01:00.0: [10]: 0x0004c800 0 0 0 0
ath10k_pci 0002:01:00.0: [11]: 0x0004cc00 0 0 0 0
ath10k_pci 0002:01:00.0: CE[1] write_index 212 sw_index 213 hw_index 0 nentries_mask 0x000001ff
ath10k_pci 0002:01:00.0: CE[2] write_index 20 sw_index 21 hw_index 0 nentries_mask 0x0000007f
ath10k_pci 0002:01:00.0: CE[5] write_index 155 sw_index 156 hw_index 0 nentries_mask 0x000001ff
ath10k_pci 0002:01:00.0: DMA addr: nbytes: meta data: byte swap: gather:
ath10k_pci 0002:01:00.0: [455]: 0x580c0042 0 0 0 0
ath10k_pci 0002:01:00.0: [456]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [457]: 0x580c0042 0 0 0 0
ath10k_pci 0002:01:00.0: [458]: 0x594a0038 0 0 0 1
ath10k_pci 0002:01:00.0: [459]: 0x580c0a42 0 0 0 0
ath10k_pci 0002:01:00.0: [460]: 0x594a0060 0 0 0 1
ath10k_pci 0002:01:00.0: [461]: 0x580c0c42 0 0 0 0
ath10k_pci 0002:01:00.0: [462]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [463]: 0x580c0c42 0 0 0 0
ath10k_pci 0002:01:00.0: [464]: 0x594a0038 0 0 0 1
ath10k_pci 0002:01:00.0: [465]: 0x580c0a42 0 0 0 0
ath10k_pci 0002:01:00.0: [466]: 0x594a0060 0 0 0 1
ath10k_pci 0002:01:00.0: [467]: 0x580c0042 0 0 0 0
ath10k_pci 0002:01:00.0: [468]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [469]: 0x580c1c42 0 0 0 0
ath10k_pci 0002:01:00.0: [470]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [471]: 0x580c1c42 0 0 0 0
ath10k_pci 0002:01:00.0: [472]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [473]: 0x580c1c42 0 0 0 0
ath10k_pci 0002:01:00.0: [474]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [475]: 0x580c0642 0 0 0 0
ath10k_pci 0002:01:00.0: [476]: 0x594a0038 0 0 0 1
ath10k_pci 0002:01:00.0: [477]: 0x580c0842 0 0 0 0
ath10k_pci 0002:01:00.0: [478]: 0x594a0060 0 0 0 1
ath10k_pci 0002:01:00.0: [479]: 0x580c0042 0 0 0 0
ath10k_pci 0002:01:00.0: [480]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [481]: 0x580c0042 0 0 0 0
ath10k_pci 0002:01:00.0: [482]: 0x594a0038 0 0 0 1
ath10k_pci 0002:01:00.0: [483]: 0x580c0842 0 0 0 0
ath10k_pci 0002:01:00.0: [484]: 0x594a0060 0 0 0 1
ath10k_pci 0002:01:00.0: [485]: 0x580c0642 0 0 0 0
ath10k_pci 0002:01:00.0: [486]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [487]: 0x580c0642 0 0 0 0
ath10k_pci 0002:01:00.0: [488]: 0x594a0038 0 0 0 1
ath10k_pci 0002:01:00.0: [489]: 0x580c0842 0 0 0 0
ath10k_pci 0002:01:00.0: [490]: 0x594a0060 0 0 0 1
ath10k_pci 0002:01:00.0: [491]: 0x580c0042 0 0 0 0
ath10k_pci 0002:01:00.0: [492]: 0x58174040 0 1 0 0
ath10k_pci 0002:01:00.0: [493]: 0x5a946040 0 1 0 0
ath10k_pci 0002:01:00.0: [494]: 0x59909040 0 1 0 0
ath10k_pci 0002:01:00.0: [495]: 0x5ae5a040 0 1 0 0
ath10k_pci 0002:01:00.0: [496]: 0x58096040 0 1 0 0
ath10k_pci 0002:01:00.0: [497]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [498]: 0x580c0642 0 0 0 0
ath10k_pci 0002:01:00.0: [499]: 0x5c1e0040 0 1 0 0
ath10k_pci 0002:01:00.0: [500]: 0x58153040 0 1 0 0
ath10k_pci 0002:01:00.0: [501]: 0x58129040 0 1 0 0
ath10k_pci 0002:01:00.0: [502]: 0x5952f040 0 1 0 0
ath10k_pci 0002:01:00.0: [503]: 0x59535040 0 1 0 0
ath10k_pci 0002:01:00.0: [504]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [505]: 0x580c0042 0 0 0 0
ath10k_pci 0002:01:00.0: [506]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [507]: 0x580c0042 0 0 0 0
ath10k_pci 0002:01:00.0: [508]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [509]: 0x580c0042 0 0 0 0
ath10k_pci 0002:01:00.0: [510]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [511]: 0x580c0042 0 0 0 0
ath10k_pci 0002:01:00.0: [512]: 0x5adcc040 0 1 0 0
ath10k_pci 0002:01:00.0: [513]: 0x5cf3d040 0 1 0 0
ath10k_pci 0002:01:00.0: [514]: 0x5c1e9040 64 1 0 0
ath10k_pci 0002:01:00.0: [515]: 0x00000000 0 0 0 0

Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29 11:49:46 +03:00
Timothy Redaelli
4415d58c47 ath9k: fix DFS detector synchronization
some userspace programs (e.g. hostapd) need to set the regulatory domain
before selecting the operating channel. Synchronize DFS detector regardless of
the value of ah->curchan, to avoid situations where wireless scan can't be done
on some 5GHz sub-bands, because dfs_region is constantly UNSET.

Acked-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Timothy Redaelli <tredaelli@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29 11:48:08 +03:00
Denis Kenzior
466a306142 nl80211: Add SOCKET_OWNER support to START_AP
Signed-off-by: Denis Kenzior <denkenz@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-03-29 10:47:28 +02:00
Denis Kenzior
188c1b3c04 nl80211: Add SOCKET_OWNER support to JOIN_MESH
Signed-off-by: Denis Kenzior <denkenz@gmail.com>
[johannes: fix race with wdev lock/unlock by just acquiring once]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-03-29 10:38:24 +02:00
Sebastian Andrzej Siewior
29d049be94 iommu/amd: Return proper error code in irq_remapping_alloc()
In the unlikely case when alloc_irq_table() is not able to return a
remap table then "ret" will be assigned with an error code. Later, the
code checks `index' and if it is negative (which it is because it is
initialized with `-1') and then then function properly aborts but
returns `-1' instead `-ENOMEM' what was intended.
In order to correct this, I assign -ENOMEM to index.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-03-29 10:38:17 +02:00
Sebastian Andrzej Siewior
2cd1083d79 iommu/amd: Make amd_iommu_devtable_lock a spin_lock
Before commit 0bb6e243d7 ("iommu/amd: Support IOMMU_DOMAIN_DMA type
allocation") amd_iommu_devtable_lock had a read_lock() user but now
there are none. In fact, after the mentioned commit we had only
write_lock() user of the lock. Since there is no reason to keep it as
writer lock, change its type to a spin_lock.
I *think* that we might even be able to remove the lock because all its
current user seem to have their own protection.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-03-29 10:38:17 +02:00
Sebastian Andrzej Siewior
993ca6e063 iommu/amd: Drop the lock while allocating new irq remap table
The irq_remap_table is allocated while the iommu_table_lock is held with
interrupts disabled.
>From looking at the call sites, all callers are in the early device
initialisation (apic_bsp_setup(), pci_enable_device(),
pci_enable_msi()) so make sense to drop the lock which also enables
interrupts and try to allocate that memory with GFP_KERNEL instead
GFP_ATOMIC.

Since during the allocation the iommu_table_lock is dropped, we need to
recheck if table exists after the lock has been reacquired. I *think*
that it is impossible that the "devid" entry appears in irq_lookup_table
while the lock is dropped since the same device can only be probed once.
However I check for both cases, just to be sure.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-03-29 10:38:16 +02:00
Sebastian Andrzej Siewior
2fcc1e8ac4 iommu/amd: Factor out setting the remap table for a devid
Setting the IRQ remap table for a specific devid (or its alias devid)
includes three steps. Those three steps are always repeated each time
this is done.
Introduce a new helper function, move those steps there and use that
function instead. The compiler can still decide if it is worth to
inline.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-03-29 10:38:16 +02:00
Sebastian Andrzej Siewior
4fde541c9d iommu/amd: Use table' instead irt' as variable name in amd_iommu_update_ga()
The variable of type struct irq_remap_table is always named `table'
except in amd_iommu_update_ga() where it is called `irt'. Make it
consistent and name it also `table'.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-03-29 10:38:15 +02:00
Sebastian Andrzej Siewior
fde65dd3d3 iommu/amd: Remove the special case from alloc_irq_table()
alloc_irq_table() has a special ioapic argument. If set then it will
pre-allocate / reserve the first 32 indexes. The argument is only once
true and it would make alloc_irq_table() a little simpler if we would
extract the special bits to the caller.
The caller of irq_remapping_alloc() is holding irq_domain_mutex so the
initialization of iommu->irte_ops->set_allocated() should not race
against other user.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-03-29 10:38:15 +02:00
Sebastian Andrzej Siewior
ea6166f4b8 iommu/amd: Split irq_lookup_table out of the amd_iommu_devtable_lock
The function get_irq_table() reads/writes irq_lookup_table while holding
the amd_iommu_devtable_lock. It also modifies
amd_iommu_dev_table[].data[2].
set_dte_entry() is using amd_iommu_dev_table[].data[0|1] (under the
domain->lock) so it should be okay. The access to the iommu is
serialized with its own (iommu's) lock.

So split out get_irq_table() out of amd_iommu_devtable_lock's lock.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-03-29 10:38:15 +02:00
Sebastian Andrzej Siewior
2bc0018089 iommu/amd: Split domain id out of amd_iommu_devtable_lock
domain_id_alloc() and domain_id_free() is used for id management. Those
two function share a bitmap (amd_iommu_pd_alloc_bitmap) and set/clear
bits based on id allocation. There is no need to share this with
amd_iommu_devtable_lock, it can use its own lock for this operation.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-03-29 10:38:15 +02:00
Sebastian Andrzej Siewior
779da73273 iommu/amd: Turn dev_data_list into a lock less list
alloc_dev_data() adds new items to dev_data_list and search_dev_data()
is searching for items in this list. Both protect the access to the list
with a spinlock.
There is no need to navigate forth and back within the list and there is
also no deleting of a specific item. This qualifies the list to become a
lock less list and as part of this, the spinlock can be removed.
With this change the ordering of those items within the list is changed:
before the change new items were added to the end of the list, now they
are added to the front. I don't think it matters but wanted to mention
it.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-03-29 10:38:14 +02:00
Sebastian Andrzej Siewior
39ffe39545 iommu/amd: Take into account that alloc_dev_data() may return NULL
find_dev_data() does not check whether the return value alloc_dev_data()
is NULL. This was okay once because the pointer was returned once as-is.
Since commit df3f7a6e8e ("iommu/amd: Use is_attach_deferred
call-back") the pointer may be used within find_dev_data() so a NULL
check is required.

Cc: Baoquan He <bhe@redhat.com>
Fixes: df3f7a6e8e ("iommu/amd: Use is_attach_deferred call-back")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-03-29 10:38:14 +02:00
Denis Kenzior
f8d16d3edb nl80211: Add SOCKET_OWNER support to JOIN_IBSS
Signed-off-by: Denis Kenzior <denkenz@gmail.com>
[johannes: fix race with wdev lock/unlock by just acquiring once]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-03-29 10:36:22 +02:00
Kalle Valo
63f5be0a81 iwlwifi patches for 4.14
* Fix a UBSAN warning;
 * Improvement in the net-stack/driver log syncing
 * An RCU lock fix in the new rate-scaling code;
 * Support for new PCI IDs for the 9000 family;
 * Support for a new API version;
 * Initial work for supporting the new ETSI rules;
 * Support for advanced dwell in scanning;
 * Support for OCE in scanning;
 * Some debugging improvements;
 * Other small improvements and cleanups here and there.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEF3LNfgb2BPWm68smoUecoho8xfoFAlq7844ACgkQoUecoho8
 xfrA4w/+Id8GUA7RpsH3rkdWYJbru9j4XzANGVgDqo1G52nuczAjWuT5Apdtb9Dc
 ULwYpo8O9H4xLc3plF7RQ/NuqH5gLB+XpKFUbo6pN6tKOYXo6lyvAVjE9N6fhaxT
 pbd2ZFyC7M6NAhyPIAC5n0MiLBQw57Y0Qiou/woowF/GGttP++XFLsCjU8h4bKui
 NTenIfs8ht0t0KFw56JEiyMeUS8HcLa6fcnkTFkIZbyho5MlMJP8Yxnc0E7mwwOf
 BWpwlRBCSJUghzW3MiWeSkU1+23IPbFFRdSRY3Suk0u1lFfWuIAKM0iqpg/BKeU9
 EVrvFLQ+P8KjnfDV9zxTFL24oxw1YJ/Myss5nIAOFzKopco7FNdGbkW7HD2XVwVz
 vjs5j57496lkC/Cb55zXbNLjrp1gL+16RlOcpKNmcS5khmv0NrKBj5RRkZQ8XOXD
 TWBOcev89R58E6XnUijiEN96zZ7Ufdb56m3Xm/uvses/aoNFK5+QspMdPTeuI+VA
 Pw+APOiTSWHW29Ndn93MNLlJoo02v/o/qWbPUkTN9iASyHowYuKqiC18o3vx8I/6
 DFh86k1wNchgxlo8MbHrM2ginr/+LtQke+FsjczCRIRUH8ySFHthZtItr2Bl/kky
 JQwC/R7AQT8iZWphA8aEQnXOaOuxwMve0QpKxHwAI4FUFHReUU0=
 =8m6c
 -----END PGP SIGNATURE-----

Merge tag 'iwlwifi-next-for-kalle-2018-03-28' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next

iwlwifi patches for 4.14

* Fix a UBSAN warning;
* Improvement in the net-stack/driver log syncing
* An RCU lock fix in the new rate-scaling code;
* Support for new PCI IDs for the 9000 family;
* Support for a new API version;
* Initial work for supporting the new ETSI rules;
* Support for advanced dwell in scanning;
* Support for OCE in scanning;
* Some debugging improvements;
* Other small improvements and cleanups here and there.
2018-03-29 11:32:17 +03:00
Shaokun Zhang
f746a025d3 iommu/vt-d:Remove unused variable
Unused after commit <42e8c186b5> ("iommu/vt-d: Simplify io/tlb flushing
in intel_iommu_unmap"), cleanup it.

Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-03-29 10:31:25 +02:00
Joerg Roedel
1543f22633 Merge branch 'for-joerg/arm-smmu/updates' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into arm/smmu 2018-03-29 10:25:27 +02:00
Denis Kenzior
37b1c00468 cfg80211: Support all iftypes in autodisconnect_wk
Currently autodisconnect_wk assumes that only interface types of
P2P_CLIENT and STATION use conn_owner_nlportid.  Change this so all
interface types are supported.

Signed-off-by: Denis Kenzior <denkenz@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-03-29 10:22:19 +02:00
Dmitry Lebed
2c390e44e4 cfg80211: enable use of non-cleared DFS channels for DFS offload
Currently channel switch/start_ap to DFS channel cannot be done to
non-CAC-cleared channel even if DFS offload if enabled.
Make non-cleared DFS channels available if DFS offload is enabled.
CAC will be started by HW after channel change, start_ap call, etc.

Signed-off-by: Dmitry Lebed <dlebed@quantenna.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-03-29 10:21:35 +02:00
Dmitry Lebed
850964519a cfg80211: fix CAC_STARTED event handling
Exclude CAC_STARTED event from !wdev->cac_started check,
since cac_started will be set later in the same function.

Signed-off-by: Dmitry Lebed <dlebed@quantenna.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-03-29 10:21:16 +02:00
tamizhr@codeaurora.org
97f5f4254a mac80211: Use proper chan_width enum in sta opmode event
Bandwidth change value reported via nl80211 contains mac80211
specific enum value(ieee80211_sta_rx_bw) and which is not
understand by userspace application. Map the mac80211 specific
value to nl80211_chan_width enum value to avoid using wrong value
in the userspace application. And used station's ht/vht capability
to map IEEE80211_STA_RX_BW_20 and IEEE80211_STA_RX_BW_160 with
proper nl80211 value.

Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-03-29 10:19:59 +02:00
tamizhr@codeaurora.org
57566b2003 mac80211: Use proper smps_mode enum in sta opmode event
SMPS_MODE change value notified via nl80211 contains mac80211
specific value(ieee80211_smps_mode) and user space application
will not know those values. This patch add support to map
the mac80211 enum value to nl80211_smps_mode which will be
understood by the userspace application.

Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-03-29 10:19:55 +02:00
tamizhr@codeaurora.org
5e78abd075 cfg80211: fix data type of sta_opmode_info parameter
Currently bw and smps_mode are u8 type value in sta_opmode_info
structure. This values filled in mac80211 from ieee80211_sta_rx_bandwidth
and ieee80211_smps_mode. These enum values are specific to mac80211 and
userspace/cfg80211 doesn't know about that. This will lead to incorrect
result/assumption by the user space application.
Change bw and smps_mode parameters to their respective enums in nl80211.

Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-03-29 10:19:52 +02:00
Teichmann, Martin
79a0b33165 USB: serial: ftdi_sio: add Id for Physik Instrumente E-870
This adds support for the Physik Instrumente E-870 PIShift Drive
Electronics, a Piezo motor driver.

Signed-off-by: Martin Teichmann <martin.teichmann@xfel.eu>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
2018-03-29 10:06:45 +02:00
Boris Brezillon
94bf11bdda mtd: fsl-quadspi: Remove unneeded driver.bus assignment
platform_driver_register() takes care of assigning driver->bus
to &platform_bus_type, no need to explicitly assign it in the driver.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Acked-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>
2018-03-29 09:45:58 +02:00
Boris Brezillon
6b6de6543d mtd: rawnand: marvell: Rename ->ecc_clk into ->core_clk
The core clock field was badly named ->ecc_clk which might lead to some
confusion. Rename it ->core_clk.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-03-29 09:38:21 +02:00
Miquel Raynal
bb00ff2f4a mtd: rawnand: s3c2410: enhance the probe function error path
Prepare the migration of the lpc32xx_slc driver to use nand_scan() by
cleaning the error path in the probe function.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-29 09:38:21 +02:00
Miquel Raynal
0eaa879be6 mtd: rawnand: tango: fix probe function error path
An error after nand_scan_tail() should trigger a nand_cleanup().
The helper mtd_device_parse_register() returns an error code that should
be checked and nand_cleanup() called accordingly.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-29 09:38:20 +02:00
Miquel Raynal
5a3e8cde10 mtd: rawnand: sh_flctl: fix the probe function error path
An error after nand_scan_tail() should trigger a nand_cleanup().
The helper mtd_device_parse_register() returns an error code that should
be checked and nand_cleanup() called accordingly.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-29 09:38:20 +02:00
Miquel Raynal
122bb3cb8b mtd: rawnand: omap2: fix the probe function error path
An error after nand_scan_tail() should trigger a nand_cleanup().
The helper mtd_device_parse_register() returns an error code that should
be checked and nand_cleanup() called accordingly.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-29 09:38:20 +02:00
Miquel Raynal
be051bf28f mtd: rawnand: mxc: fix probe function error path
An error after nand_scan_tail() should trigger a nand_cleanup().
The helper mtd_device_parse_register() returns an error code that should
be checked and nand_cleanup() called accordingly.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-29 09:38:19 +02:00
Miquel Raynal
4e5d1d9078 mtd: rawnand: denali: fix probe function error path
An error after nand_scan_tail() should trigger a nand_cleanup().
The helper mtd_device_register() returns an error code that should
be checked and nand_cleanup() called accordingly.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-29 09:38:19 +02:00
Miquel Raynal
4acc3046ed mtd: rawnand: davinci: fix probe function error path
An error after nand_scan_tail() should trigger a nand_cleanup().
The helper mtd_device_register() returns an error code that should
be checked and nand_cleanup() called accordingly.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-29 09:38:18 +02:00
Miquel Raynal
a446c998ff mtd: rawnand: cafe: fix probe function error path
An error after nand_scan_tail() should trigger a nand_cleanup().
The helper mtd_device_parse_register() returns an error code that should
be checked and nand_cleanup() called accordingly.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-29 09:38:18 +02:00
Miquel Raynal
5826b8802a mtd: rawnand: brcmnand: fix probe function error path
An error after nand_scan_tail() should trigger a nand_cleanup().
The helper mtd_device_register() returns an error code that should
be checked and nand_cleanup() called accordingly.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-29 09:38:18 +02:00
Boris Brezillon
15d6f11828 mtd: rawnand: sunxi: Stop supporting ECC_HW_SYNDROME mode
This mode is not used by any existing setup and should not be used
because it overwrites the BBMs. Let's just remove it before someone
starts using it.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-03-29 09:38:17 +02:00
Gregory CLEMENT
961ba15c48 mtd: rawnand: marvell: Fix clock resource by adding a register clock
On Armada 7K/8K we need to explicitly enable the register clock. This
clock is optional because not all the SoCs using this IP need it but at
least for Armada 7K/8K it is actually mandatory.

The binding documentation is updated accordingly.

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-29 09:38:10 +02:00
Arushi Singhal
b756816dad mtd: ftl: Use DIV_ROUND_UP()
The kernel.h macro DIV_ROUND_UP performs the computation
(((n) + (d) - 1) / (d)) but is perhaps more readable.

Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-29 09:36:01 +02:00
Xiaolei Li
c77a931206 mtd: Fix some function description mismatches in mtdcore.c
In mtdcore.c, some function descriptions do not match function
definitions. Just fix these mismatches.

Signed-off-by: Xiaolei Li <xiaolei.li@mediatek.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-29 09:31:54 +02:00
Prabhakar Kushwaha
7d5cba597d mtd: physmap_of: update struct map_info's swap as per map requirement
It is not necessary for all device's maps to be CFI_HOST_ENDIAN.
Maps device can be Big endian or little endian.

Currently it is being taken care using CONFIG_MTD_CFI_LE_BYTE_SWAP or
CONFIG_MTD_CFI_BE_BYTE_SWAP i.e. compile time.

Now update struct map_info's swap field based on device characteristics
defined in device tree.

Signed-off-by: Jagdish Gediya <jagdish.gediya@nxp.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-29 09:31:37 +02:00