Commit graph

752,023 commits

Author SHA1 Message Date
David S. Miller
e49c78f4aa Merge branch 'bond-hwaddr-sync-fixes'
Xin Long says:

====================
bonding: a bunch of fixes for dev hwaddr sync in bond_enslave

This patchset is mainly to fix a crash when adding vlan as slave of
bond which is also the parent link in patch 2/3,  and also fix some
err process problems in bond_enslave in patch 1/3 and 3/3.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26 12:51:06 -04:00
Xin Long
9f5a90c107 bonding: process the err returned by dev_set_allmulti properly in bond_enslave
When dev_set_promiscuity(1) succeeds but dev_set_allmulti(1) fails,
dev_set_promiscuity(-1) should be done before going to the err path.
Otherwise, dev->promiscuity will leak.

Fixes: 7e1a1ac1fb ("bonding: Check return of dev_set_promiscuity/allmulti")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26 12:51:06 -04:00
Xin Long
ae42cc62a9 bonding: move dev_mc_sync after master_upper_dev_link in bond_enslave
Beniamino found a crash when adding vlan as slave of bond which is also
the parent link:

  ip link add bond1 type bond
  ip link set bond1 up
  ip link add link bond1 vlan1 type vlan id 80
  ip link set vlan1 master bond1

The call trace is as below:

  [<ffffffffa850842a>] queued_spin_lock_slowpath+0xb/0xf
  [<ffffffffa8515680>] _raw_spin_lock+0x20/0x30
  [<ffffffffa83f6f07>] dev_mc_sync+0x37/0x80
  [<ffffffffc08687dc>] vlan_dev_set_rx_mode+0x1c/0x30 [8021q]
  [<ffffffffa83efd2a>] __dev_set_rx_mode+0x5a/0xa0
  [<ffffffffa83f7138>] dev_mc_sync_multiple+0x78/0x80
  [<ffffffffc084127c>] bond_enslave+0x67c/0x1190 [bonding]
  [<ffffffffa8401909>] do_setlink+0x9c9/0xe50
  [<ffffffffa8403bf2>] rtnl_newlink+0x522/0x880
  [<ffffffffa8403ff7>] rtnetlink_rcv_msg+0xa7/0x260
  [<ffffffffa8424ecb>] netlink_rcv_skb+0xab/0xc0
  [<ffffffffa83fe498>] rtnetlink_rcv+0x28/0x30
  [<ffffffffa8424850>] netlink_unicast+0x170/0x210
  [<ffffffffa8424bf8>] netlink_sendmsg+0x308/0x420
  [<ffffffffa83cc396>] sock_sendmsg+0xb6/0xf0

This is actually a dead lock caused by sync slave hwaddr from master when
the master is the slave's 'slave'. This dead loop check is actually done
by netdev_master_upper_dev_link. However, Commit 1f718f0f4f ("bonding:
populate neighbour's private on enslave") moved it after dev_mc_sync.

This patch is to fix it by moving dev_mc_sync after master_upper_dev_link,
so that this loop check would be earlier than dev_mc_sync. It also moves
if (mode == BOND_MODE_8023AD) into if (!bond_uses_primary) clause as an
improvement.

Note team driver also has this issue, I will fix it in another patch.

Fixes: 1f718f0f4f ("bonding: populate neighbour's private on enslave")
Reported-by: Beniamino Galvani <bgalvani@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26 12:51:05 -04:00
Xin Long
5c78f6bfae bonding: fix the err path for dev hwaddr sync in bond_enslave
vlan_vids_add_by_dev is called right after dev hwaddr sync, so on
the err path it should unsync dev hwaddr. Otherwise, the slave
dev's hwaddr will never be unsync when this err happens.

Fixes: 1ff412ad77 ("bonding: change the bond's vlan syncing functions with the standard ones")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Acked-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26 12:51:05 -04:00
David S. Miller
90c00f8154 Merge branch 'net-driver-barriers'
Sinan Kaya says:

====================
netdev: Eliminate duplicate barriers on weakly-ordered archs

Code includes wmb() followed by writel() in multiple places. writel()
already has a barrier on some architectures like arm64.

This ends up CPU observing two barriers back to back before executing the
register write.

Since code already has an explicit barrier call, changing writel() to
writel_relaxed().

I did a regex search for wmb() followed by writel() in each drivers
directory.
I scrubbed the ones I care about in this series.

I considered "ease of change", "popular usage" and "performance critical
path" as the determining criteria for my filtering.

We used relaxed API heavily on ARM for a long time but
it did not exist on other architectures. For this reason, relaxed
architectures have been paying double penalty in order to use the common
drivers.

Now that relaxed API is present on all architectures, we can go and scrub
all drivers to see what needs to change and what can remain.

We start with mostly used ones and hope to increase the coverage over time.
It will take a while to cover all drivers.

Feel free to apply patches individually.

Changes since v6:
- bring back amazon ena and add mmiowb, remove
  ena_com_write_sq_doorbell_rel().
- remove extra mmiowb in bnx2x
- correct spelling mistake in  bnx2x: Replace doorbell barrier() with wmb()
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26 12:47:57 -04:00
Sinan Kaya
6d2e1a8d5e net: ena: Eliminate duplicate barriers on weakly-ordered archs
Code includes barrier() followed by writel(). writel() already has a
barrier on some architectures like arm64.

This ends up CPU observing two barriers back to back before executing the
register write.

Create a new wrapper function with relaxed write operator. Use the new
wrapper when a write is following a barrier().

Since code already has an explicit barrier call, changing writel() to
writel_relaxed() and adding mmiowb() for ordering protection.

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26 12:47:56 -04:00
Sinan Kaya
fd141fa47c bnxt_en: Eliminate duplicate barriers on weakly-ordered archs
Code includes wmb() followed by writel(). writel() already has a barrier on
some architectures like arm64.

This ends up CPU observing two barriers back to back before executing the
register write.

Create a new wrapper function with relaxed write operator. Use the new
wrapper when a write is following a wmb().

Since code already has an explicit barrier call, changing writel() to
writel_relaxed().

Also add mmiowb() so that write code doesn't move outside of scope.

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Acked-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26 12:47:56 -04:00
Sinan Kaya
e42d8cee34 net: qlge: Eliminate duplicate barriers on weakly-ordered archs
Code includes wmb() followed by writel(). writel() already has a barrier on
some architectures like arm64.

This ends up CPU observing two barriers back to back before executing the
register write.

Create a new wrapper function with relaxed write operator. Use the new
wrapper when a write is following a wmb().

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26 12:47:56 -04:00
Sinan Kaya
7f883c774e bnx2x: Eliminate duplicate barriers on weakly-ordered archs
Code includes wmb() followed by writel(). writel() already has a
barrier on some architectures like arm64.

This ends up CPU observing two barriers back to back before executing
the register write.

Since code already has an explicit barrier call, changing writel() to
writel_relaxed().

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26 12:47:55 -04:00
Sinan Kaya
edd874235a bnx2x: Replace doorbell barrier() with wmb()
barrier() doesn't guarantee memory writes to be observed by the hardware on
all architectures. barrier() only tells compiler not to move this code
with respect to other read/writes.

If memory write needs to be observed by the HW, wmb() is the right choice.

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26 12:47:55 -04:00
Sinan Kaya
f9442ac498 qlcnic: Eliminate duplicate barriers on weakly-ordered archs
Code includes wmb() followed by writel(). writel() already has a
barrier on some architectures like arm64.

This ends up CPU observing two barriers back to back before executing
the register write.

Since code already has an explicit barrier call, changing writel() to
writel_relaxed().

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Acked-by: Manish Chopra <manish.chopra@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26 12:47:55 -04:00
Sinan Kaya
3c95c56732 net: qla3xxx: Eliminate duplicate barriers on weakly-ordered archs
Code includes wmb() followed by writel(). writel() already has a
barrier on some architectures like arm64.

This ends up CPU observing two barriers back to back before executing
the register write.

Since code already has an explicit barrier call, changing code to

wmb()
writel_relaxed()
mmiowb()

for multi-arch support.

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26 12:47:55 -04:00
Anirudh Venkataramanan
7ec59eeac8 ice: Add support for control queues
A control queue is a hardware interface which is used by the driver
to interact with other subsystems (like firmware, PHY, etc.). It is
implemented as a producer-consumer ring. More specifically, an
"admin queue" is a type of control queue used to interact with the
firmware.

This patch introduces data structures and functions to initialize
and teardown control/admin queues. Once the admin queue is initialized,
the driver uses it to get the firmware version.

Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-26 09:44:56 -07:00
Andy Shevchenko
7af8c46da5 dmaengine: Fix spelling for parenthesis in dmatest documentation
Fix spelling for parenthesis in dmatest documentation.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[ jc: did s/parenthesis/parentheses/ and reflowed ]
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-03-26 10:40:37 -06:00
Andy Shevchenko
bc1287b9e5 dmaengine: Make dmatest.rst indeed reST compatible
Make dmatest.rst indeed reST compatible.
Achieve this by fixing several formatting issues.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-03-26 10:40:36 -06:00
Andy Shevchenko
a6cd7714c0 dmaengine: Add note to dmatest documentation about supported channels
The documentation is not so clear for newbies in a sense of what type of the
channels are supported by it.

Clarify this by adding a note at the preamble of the documentation.

Reported-by: "Zhu, Tony" <tony.zhu@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-03-26 10:40:18 -06:00
John Fastabend
eb82a99447 net: sched, fix OOO packets with pfifo_fast
After the qdisc lock was dropped in pfifo_fast we allow multiple
enqueue threads and dequeue threads to run in parallel. On the
enqueue side the skb bit ooo_okay is used to ensure all related
skbs are enqueued in-order. On the dequeue side though there is
no similar logic. What we observe is with fewer queues than CPUs
it is possible to re-order packets when two instances of
__qdisc_run() are running in parallel. Each thread will dequeue
a skb and then whichever thread calls the ndo op first will
be sent on the wire. This doesn't typically happen because
qdisc_run() is usually triggered by the same core that did the
enqueue. However, drivers will trigger __netif_schedule()
when queues are transitioning from stopped to awake using the
netif_tx_wake_* APIs. When this happens netif_schedule() calls
qdisc_run() on the same CPU that did the netif_tx_wake_* which
is usually done in the interrupt completion context. This CPU
is selected with the irq affinity which is unrelated to the
enqueue operations.

To resolve this we add a RUNNING bit to the qdisc to ensure
only a single dequeue per qdisc is running. Enqueue and dequeue
operations can still run in parallel and also on multi queue
NICs we can still have a dequeue in-flight per qdisc, which
is typically per CPU.

Fixes: c5ad119fb6 ("net: sched: pfifo_fast use skb_array")
Reported-by: Jakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26 12:36:23 -04:00
Pawel Dembicki
743989254e net: qmi_wwan: add BroadMobi BM806U 2020:2033
BroadMobi BM806U is an Qualcomm MDM9225 based 3G/4G modem.
Tested hardware BM806U is mounted on D-Link DWR-921-C3 router.
The USB id is added to qmi_wwan.c to allow QMI communication with
the BM806U.

Tested on 4.14 kernel and OpenWRT.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26 12:35:42 -04:00
David S. Miller
14ef85b431 Merge branch 'sh_eth-unify-the-SoC-feature-checks'
Sergei Shtylyov says:

====================
sh_eth: unify the SoC feature checks

Here's a set of 5 patches against DaveM's 'net-next.git' repo.

The Ether driver sometimes uses the bit fields in 'struct sh_eth_cpu_data'
to check which Ether registers exist in a certain SoC and sometimes it uses
sh_eth_is_{gether|rz_fast_ether}() which basically compares 2 pointers (1 of
them being constant) -- the latter is definitely not a strongest feature of
the RISC CPUs (be it SH or ARM), so I decided to get rid of this type of
the feature checks in favour of the bit fields (I've also made use of a
32-bit value and method pointer where appropriate)...

[1/5] sh_eth: add sh_eth_cpu_data::soft_reset() method
[2/5] sh_eth: add sh_eth_cpu_data::edtrr_trns value
[3/5] sh_eth: add sh_eth_cpu_data::xdfar_rw flag
[4/5] sh_eth: add sh_eth_cpu_data::no_tx_cntr flag
[5/5] sh_eth: add sh_eth_cpu_data::cexcr flag
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26 12:34:20 -04:00
Sergei Shtylyov
4c1d45850d sh_eth: add sh_eth_cpu_data::cexcr flag
GEther controllers have CERCR/CEECR instead of CNDCR on the others.
Currently we are calling sh_eth_is_gether() in order to check for this,
however it would be simpler  to check the new 'cexcr' bitfield in the
'struct sh_eth_cpu_data';  then we'd be able to remove sh_eth_is_gether()
as there would be no callers left...

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26 12:34:19 -04:00
Sergei Shtylyov
ce9134dff6 sh_eth: add sh_eth_cpu_data::no_tx_cntrs flag
RZ/A1H (R7S72100) Ether controller doesn't  seem to have the TX counter
registers like TROCR/CDCR/LCCR (or at least they are still undocumented
like some TSU registers), so we bail out of sh_eth_get_stats() early in
this case.  Currently we are calling sh_eth_is_rz_fast_ether() in order
to check for this, but it would be simpler to check the new 'no_tx_cntrs'
bitfield in the 'struct sh_eth_cpu_data'; then we'd be able  to remove
sh_eth_is_rz_fast_ether() as there would be no callers left...

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26 12:34:19 -04:00
Sergei Shtylyov
246e30cc4f sh_eth: add sh_eth_cpu_data::xdfar_rw flag
The GEther-like controllers have writeable RDFAR/TDFAR, on the others
they are read-only or just absent (on R-Car). Currently we are calling
sh_eth_is_{gether|rz_fast_ether}() in order to check if these registers
can be written to, however it would be simpler to check the new 'xdfar_rw'
bitfield in the 'struct sh_eth_cpu_data'...

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26 12:34:19 -04:00
Sergei Shtylyov
3e416992e2 sh_eth: add sh_eth_cpu_data::edtrr_trns value
sh_eth_get_edtrr_trns() returns the value to be written to EDTRR in order
to start TX DMA -- this value is different between the GEther-like and
the other controllers. We can replace this function (and thus get rid of
the calls to sh_eth_is_{gether|rz_fast_ether}() by it) with a new field
'edtrr_trns' in the 'struct sh_eth_cpu_data'.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26 12:34:19 -04:00
Sergei Shtylyov
4ceedeb1b6 sh_eth: add sh_eth_cpu_data::soft_reset() method
sh_eth_reset() performs a software reset which is implemented in a
completely different way for the GEther-like controllers vs the other
controllers due to a different layout of EDMR (and other factors) --
it therefore makes sense to convert this function to a mandatory
sh_eth_cpu_data::soft_reset() method and thus get rid of the runtime
controller type check via sh_eth_is_{gether|rz_fast_ether}().

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26 12:34:19 -04:00
Sanjeev Gupta
16e693c55e Documentation/isdn: check and fix dead links ...
and switch to https where possible.

All links have been eyeballed to verify that the domains have
not changed, etc.

Signed-off-by: Sanjeev Gupta <ghane0@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26 12:31:13 -04:00
Paolo Valente
bc56e2cafa block, bfq: lower-bound the estimated peak rate to 1
If a storage device handled by BFQ happens to be slower than 7.5 KB/s
for a certain amount of time (in the order of a second), then the
estimated peak rate of the device, maintained in BFQ, becomes equal to
0. The reason is the limited precision with which the rate is
represented (details on the range of representable values in the
comments introduced by this commit). This leads to a division-by-zero
error where the estimated peak rate is used as divisor. Such a type of
failure has been reported in [1].

This commit addresses this issue by:
1. Lower-bounding the estimated peak rate to 1
2. Adding and improving comments on the range of rates representable

[1] https://www.spinics.net/lists/kernel/msg2739205.html

Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-26 10:18:27 -06:00
Richard Cochran
93e9ad9850 ptp: Fix documentation to match code.
Ever since commit 3a06c7ac24 ("posix-clocks: Remove interval timer
facility and mmap/fasync callbacks") the possibility of PHC based
posix timers has been removed.  In addition it will probably never
make sense to implement this functionality.

This patch removes the misleading text which seems to suggest that
posix timers for PHC devices will ever be a thing.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26 12:13:21 -04:00
David S. Miller
99f2241c4a Merge branch 'hns3-fixes-next'
Peng Li says:

====================
fix some bugs for HNS3

This patchset fixes some bugs for HNS3 driver:
[Patch 1/5 - 2/5] fix 2 return vlaue issues.
[Patch 3/5 - 4/5] fix 2 comments reported by code review.
[Ptach 5/5] avoid sending message to IMP because IMP will not
handle any message when it is resetting.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26 12:12:27 -04:00
Peng Li
b50ae26c57 net: hns3: never send command queue message to IMP when reset
IMP will not handle and command queue message any more when it is
in core/global, driver should not send command queue message to
IMP until reinitialize the NIC HW.

This patch checks the status and avoid the message sent to IMP when
reset.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26 12:12:27 -04:00
Fuyun Liang
ea739c9065 net: hns3: fix for not initializing VF rss_hash_key problem
Default rss_hash_key value should be given to all vports. But just the
PF rss_hash_key has the default value here. This patch adds rss_hash_key
Initialization for all vports.

Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26 12:12:26 -04:00
Fuyun Liang
3c8f5c0339 net: hns3: fix for the wrong shift problem in hns3_set_txbd_baseinfo
Third parameter of hnae_set_field is shift, But a mask is given. This
patch fixes it by replacing HNS3_TXD_BDTYPE_M with HNS3_TXD_BDTYPE_S.

Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26 12:12:26 -04:00
Fuyun Liang
da44a00f06 net: hns3: fix for returning wrong value problem in hns3_get_rss_indir_size
The return type of hns3_get_rss_indir_size is u32. But a negative value is
returned. This patch fixes it by replacing the negative value with zero.

Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26 12:12:26 -04:00
Fuyun Liang
3bd6d258b1 net: hns3: fix for returning wrong value problem in hns3_get_rss_key_size
The return type of hns3_get_rss_key_size is u32. But a negative value is
returned. This patch fixes it by replacing the negative value with zero.

Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26 12:12:26 -04:00
Colin Ian King
0c29ba1b43 net: qualcomm: rmnet: check for null ep to avoid null pointer dereference
The call to rmnet_get_endpoint can potentially return NULL so check
for this to avoid any subsequent null pointer dereferences on a NULL
ep.

Detected by CoverityScan, CID#1465385 ("Dereference null return value")

Fixes: 23790ef120 ("net: qualcomm: rmnet: Allow to configure flags for existing devices")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26 12:11:24 -04:00
Joe Perches
d3757ba4c1 ethernet: Use octal not symbolic permissions
Prefer the direct use of octal for permissions.

Done with checkpatch -f --types=SYMBOLIC_PERMS --fix-inplace
and some typing.

Miscellanea:

o Whitespace neatening around these conversions.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26 12:07:49 -04:00
Joe Perches
d61e403856 drivers/net: Use octal not symbolic permissions
Prefer the direct use of octal for permissions.

Done with checkpatch -f --types=SYMBOLIC_PERMS --fix-inplace
and some typing.

Miscellanea:

o Whitespace neatening around these conversions.

Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26 12:07:49 -04:00
Joe Perches
d6444062f8 net: Use octal not symbolic permissions
Prefer the direct use of octal for permissions.

Done with checkpatch -f --types=SYMBOLIC_PERMS --fix-inplace
and some typing.

Miscellanea:

o Whitespace neatening around these conversions.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26 12:07:48 -04:00
Brian Foster
72c44e35f0 xfs: clean up xfs_mount allocation and dynamic initializers
Most of the generic data structures embedded in xfs_mount are
dynamically initialized immediately after mp is allocated. A few
fields are left out and initialized during the xfs_mountfs()
sequence, after mp has been attached to the superblock.

To clean this up and help prevent premature access of associated
fields, refactor xfs_mount allocation and all dependent init calls
into a new helper. This self-documents that all low level data
structures (i.e., locks, trees, etc.) should be initialized before
xfs_mount is attached to the superblock.

Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-03-26 08:54:15 -07:00
David S. Miller
cb6219a2f5 Merge branch 'Drop-NETDEV_UNREGISTER_FINAL'
Kirill Tkhai says:

====================
Drop NETDEV_UNREGISTER_FINAL (was unnamed)

This series drops unused NETDEV_UNREGISTER_FINAL
after some preparations.

v2: New patch [2/3]. Use switch() in [1/3].

The first version was acked by Jason Gunthorpe,
and [1/3] was acked by David Ahern.

Since there are differences to v1, I haven't added
Acked-by tags of people. It would be nice, if you
fill OK to tag v2 too.
====================

Acked-by: Jason Gunthorpe <jgg@mellanox>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26 11:35:45 -04:00
Kirill Tkhai
070f2d7e26 net: Drop NETDEV_UNREGISTER_FINAL
Last user is gone after bdf5bd7f21 "rds: tcp: remove
register_netdevice_notifier infrastructure.", so we can
remove this netdevice command. This allows to delete
rtnl_lock() in netdev_run_todo(), which is hot path for
net namespace unregistration.

dev_change_net_namespace() and netdev_wait_allrefs()
have rcu_barrier() before NETDEV_UNREGISTER_FINAL call,
and the source commits say they were introduced to
delemit the call with NETDEV_UNREGISTER, but this patch
leaves them on the places, since they require additional
analysis, whether we need in them for something else.

Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26 11:34:00 -04:00
Kirill Tkhai
3e0c2dbfea infiniband: Replace usnic_ib_netdev_event_to_string() with netdev_cmd_to_name()
This function just calls netdev_cmd_to_name().

Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26 11:34:00 -04:00
Kirill Tkhai
ede2762d93 net: Make NETDEV_XXX commands enum { }
This patch is preparation to drop NETDEV_UNREGISTER_FINAL.
Since the cmd is used in usnic_ib_netdev_event_to_string()
to get cmd name, after plain removing NETDEV_UNREGISTER_FINAL
from everywhere, we'd have holes in event2str[] in this
function.

Instead of that, let's make NETDEV_XXX commands names
available for everyone, and to define netdev_cmd_to_name()
in the way we won't have to shaffle names after their
numbers are changed.

Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26 11:33:26 -04:00
Madalin Bucur
c2b72e8e10 fsl/fman: remove unnecessary set_dma_ops() call and HAS_DMA dependency
The platform device is no longer used for DMA mapping so the
(questionable) setting of the DMA ops done here is no longer
needed. Removing it together with the HAS_DMA dependency that
it required.

Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26 11:30:06 -04:00
David S. Miller
40a94f7a6b Merge branch 'ethernet-ave-add-UniPhier-PXs3-support'
Kunihiko Hayashi says:

====================
net: ethernet: ave: add UniPhier PXs3 support

Add ethernet controller support on UniPhier PXs3 SoC.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26 11:29:11 -04:00
Kunihiko Hayashi
469e3d79b8 net: ethernet: ave: add UniPhier PXs3 support
Add a compatible string and SoC data for ethernet controller on
UniPhier PXs3 SoC.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26 11:29:10 -04:00
Kunihiko Hayashi
8396764154 dt-bindings: net: ave: add PXs3 support
Add a compatible string for ethernet controller on UniPhier PXs3 SoC.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26 11:29:10 -04:00
Anirudh Venkataramanan
837f08fdec ice: Add basic driver framework for Intel(R) E800 Series
This patch adds a basic driver framework for the Intel(R) E800 Ethernet
Series of network devices. There is no functionality right now other than
the ability to load.

Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-26 08:28:02 -07:00
Ramon Fried
6767b302e1 wcn36xx: Check DXE IRQ reason
IRQ reason was not cheked for errors.
Although error handing is not currently supported, it
will be nice to output an error value to the log if the
DMA operation failed.

Signed-off-by: Ramon Fried <rfried@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-26 18:27:27 +03:00
Ramon Fried
e5d0467090 wcn36xx: calculate DXE default channel values
DXE channel defaults used hardcoded magic values.
Added bit definitions of the control register and
calculate this values in compilation for clarity.

Signed-off-by: Ramon Fried <rfried@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-26 18:26:31 +03:00
Ramon Fried
6ced795816 wcn36xx: calculate DXE control registers values
DXE descriptor control registers used hardcoded magic values.  Added bit
definitions of the control register and calculate this values in compilation
for clarity. No functional changes.

Signed-off-by: Ramon Fried <rfried@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-26 18:25:13 +03:00