Commit graph

752,023 commits

Author SHA1 Message Date
Greg Kroah-Hartman
85a09bf492 phy: for 4.17
*) Add USB PHY driver for MDM6600 on Droid
  *) Add USB PHY driver for STM32 USB PHY Controller
  *) Add inno-usb2-phy driver for hi3798cv200 SoC
  *) Add combo phy driver (SATA/USB/PCIE) for HiSilicon STB SoCs
  *) Add USB3 PHY driver for Meson GXL and GXM
  *) Add support for R8A77965 Gen3 USB 2.0 PHY in phy-rcar-gen3-usb2 driver
  *) Add support for qualcomm QUSB2 V2 and QMP V3 USB3 PHY in phy-qcom-qusb2
     and phy-qcom-qmp PHY driver respectively
  *) Add support for runtime PM in phy-qcom-qusb2 and phy-qcom-qmp PHY drivers
  *) Add support for Allwinner R40 USB PHY in sun4i-usb PHY driver
  *) Add support in rockchip-typec PHY driver to make extcon optional and
     fallback to working in host mode if extcon is missing
  *) Add support in rockchip-typec PHY driver to mux PHYs connected to DP
  *) Add support to configure slew rate parameters in phy-mtk-tphy PHY driver
  *) Add workaround for missing Vbus det interrupts on Allwinner A23/A33
  *) Add USB speed related PHY modes in phy core
  *) Fix PHY 'structure' documentation
  *) Force rockchip-typec PHY to USB2 if DP-only mode is used
  *) Fix phy-qcom-qusb2 and phy-qcom-qmp PHY drivers to follow PHY reset and
     initialization sequence as per hardware programming manual
  *) Fix Marvell BG2CD SoC USB failure in phy-berlin-usb driver
  *) Minor fixes in lpc18xx-usb-otg, xusb-tegra210 and phy-rockchip-emmc PHY
     drivers
 
 Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJasMDKAAoJEA5ceFyATYLZZkgP/0fjnSf2JwiJ9QPDigaUu/2V
 NU0ImYkHcRaLS6YH+UegusA8vIwmM5oCA0P8Sbc5EGkCzIpHDRiGwCn5dfT7+a+S
 rx/x2+HxplJ3aXP8acX+DCJqezI+GI7XtuP05AYZ3tIi6smrLsgpdR0pdQ0/CSVM
 Fj7mz06XYR4me94i1LXJqE5YVsRcvwNnNpxaVCRTKWfrtZx9ZlNEFAT6pZ9TeaIM
 tTA0zGmoklpmOJ6w1cvqfQynq8a+7pvydaFmmCP7jGrDlH7G6lNFPDqYco0U0zIe
 U8K7DhdyMq74fXTb+E+xsKnJwYdpXI7bfFeDlmlMevU36wHbjIXZqD3gLIt5Fk3r
 yvkmRd9w6KW7wLF/fITq3fy+k0D/xNshj81+s7q6MhflgQ2TkehR8h8XL+xsdh8J
 MYkC9w+EffpEKms5w35l/CCwEj+/oylewnbDp8ucz3YeTRAQLdjpA8KPv05bJBGb
 nfT00sM287fTyLPGwRek0L1OGDi51TLYEaHRVUwzXvpoRVZAFmO39IQQKedtfqrr
 U0AJPG4kiqQ5BLoIbYo5tvCuR75gEMcrCsjk29FiH8+xgF22Ka96A15yY0p+2M9H
 6cV6qLCVJO5QnI/cP9rMA0QDTx5ia+Rp0FXgpSbAyrb+yRDXhCCeLqLN2YGlVqwU
 Cb2cVZPDy0Xxh+BLMrJg
 =22oc
 -----END PGP SIGNATURE-----

Merge tag 'phy-for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next

Kishon writes:

phy: for 4.17

 *) Add USB PHY driver for MDM6600 on Droid
 *) Add USB PHY driver for STM32 USB PHY Controller
 *) Add inno-usb2-phy driver for hi3798cv200 SoC
 *) Add combo phy driver (SATA/USB/PCIE) for HiSilicon STB SoCs
 *) Add USB3 PHY driver for Meson GXL and GXM
 *) Add support for R8A77965 Gen3 USB 2.0 PHY in phy-rcar-gen3-usb2 driver
 *) Add support for qualcomm QUSB2 V2 and QMP V3 USB3 PHY in phy-qcom-qusb2
    and phy-qcom-qmp PHY driver respectively
 *) Add support for runtime PM in phy-qcom-qusb2 and phy-qcom-qmp PHY drivers
 *) Add support for Allwinner R40 USB PHY in sun4i-usb PHY driver
 *) Add support in rockchip-typec PHY driver to make extcon optional and
    fallback to working in host mode if extcon is missing
 *) Add support in rockchip-typec PHY driver to mux PHYs connected to DP
 *) Add support to configure slew rate parameters in phy-mtk-tphy PHY driver
 *) Add workaround for missing Vbus det interrupts on Allwinner A23/A33
 *) Add USB speed related PHY modes in phy core
 *) Fix PHY 'structure' documentation
 *) Force rockchip-typec PHY to USB2 if DP-only mode is used
 *) Fix phy-qcom-qusb2 and phy-qcom-qmp PHY drivers to follow PHY reset and
    initialization sequence as per hardware programming manual
 *) Fix Marvell BG2CD SoC USB failure in phy-berlin-usb driver
 *) Minor fixes in lpc18xx-usb-otg, xusb-tegra210 and phy-rockchip-emmc PHY
    drivers

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-03-20 10:10:46 +01:00
Christoph Hellwig
16e73adbca dma/swiotlb: Remove swiotlb_{alloc,free}_coherent()
Unused now that everyone uses swiotlb_{alloc,free}().

Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Muli Ben-Yehuda <mulix@mulix.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: iommu@lists.linux-foundation.org
Link: http://lkml.kernel.org/r/20180319103826.12853-15-hch@lst.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-20 10:01:59 +01:00
Christoph Hellwig
c10f07aa27 dma/direct: Handle force decryption for DMA coherent buffers in common code
With that in place the generic DMA-direct routines can be used to
allocate non-encrypted bounce buffers, and the x86 SEV case can use
the generic swiotlb ops including nice features such as using CMA
allocations.

Note that I'm not too happy about using sev_active() in DMA-direct, but
I couldn't come up with a good enough name for a wrapper to make it
worth adding.

Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Muli Ben-Yehuda <mulix@mulix.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: iommu@lists.linux-foundation.org
Link: http://lkml.kernel.org/r/20180319103826.12853-14-hch@lst.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-20 10:01:59 +01:00
Christoph Hellwig
b6e05477c1 dma/direct: Handle the memory encryption bit in common code
Give the basic phys_to_dma() and dma_to_phys() helpers a __-prefix and add
the memory encryption mask to the non-prefixed versions.  Use the
__-prefixed versions directly instead of clearing the mask again in
various places.

Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Muli Ben-Yehuda <mulix@mulix.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: iommu@lists.linux-foundation.org
Link: http://lkml.kernel.org/r/20180319103826.12853-13-hch@lst.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-20 10:01:59 +01:00
Christoph Hellwig
e7de6c7cc2 dma/swiotlb: Remove swiotlb_set_mem_attributes()
Now that set_memory_decrypted() is always available we can just call it
directly.

Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Muli Ben-Yehuda <mulix@mulix.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: iommu@lists.linux-foundation.org
Link: http://lkml.kernel.org/r/20180319103826.12853-12-hch@lst.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-20 10:01:58 +01:00
Christoph Hellwig
b7fa07460b set_memory.h: Provide set_memory_{en,de}crypted() stubs
... to make these APIs more universally available.

Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Muli Ben-Yehuda <mulix@mulix.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: iommu@lists.linux-foundation.org
Link: http://lkml.kernel.org/r/20180319103826.12853-11-hch@lst.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-20 10:01:58 +01:00
Christoph Hellwig
178c568244 x86/dma: Remove dma_alloc_coherent_gfp_flags()
All dma_ops implementations used on x86 now take care of setting their own
required GFP_ masks for the allocation.  And given that the common code
now clears harmful flags itself that means we can stop the flags in all
the IOMMU implementations as well.

Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Muli Ben-Yehuda <mulix@mulix.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: iommu@lists.linux-foundation.org
Link: http://lkml.kernel.org/r/20180319103826.12853-10-hch@lst.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-20 10:01:58 +01:00
Christoph Hellwig
d657c5c73c iommu/intel-iommu: Enable CONFIG_DMA_DIRECT_OPS=y and clean up intel_{alloc,free}_coherent()
Use the dma_direct_*() helpers and clean up the code flow.

Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Muli Ben-Yehuda <mulix@mulix.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: iommu@lists.linux-foundation.org
Link: http://lkml.kernel.org/r/20180319103826.12853-9-hch@lst.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-20 10:01:58 +01:00
Christoph Hellwig
b468620f2a iommu/amd_iommu: Use CONFIG_DMA_DIRECT_OPS=y and dma_direct_{alloc,free}()
This cleans up the code a lot by removing duplicate logic.

Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Tested-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Joerg Roedel <jroedel@suse.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Muli Ben-Yehuda <mulix@mulix.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: iommu@lists.linux-foundation.org
Link: http://lkml.kernel.org/r/20180319103826.12853-8-hch@lst.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-20 10:01:58 +01:00
Christoph Hellwig
51c7eeba79 x86/dma/amd_gart: Use dma_direct_{alloc,free}()
This gains support for CMA allocations for the force_iommu case, and
cleans up the code a bit.

Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Muli Ben-Yehuda <mulix@mulix.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: iommu@lists.linux-foundation.org
Link: http://lkml.kernel.org/r/20180319103826.12853-7-hch@lst.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-20 10:01:57 +01:00
Christoph Hellwig
f3c39d5104 x86/dma/amd_gart: Look at dev->coherent_dma_mask instead of GFP_DMA
We want to phase out looking at the magic GFP_DMA flag in the DMA mapping
routines, so switch the gart driver to use the dev->coherent_dma_mask
instead, which is used to select the GFP_DMA flag in the caller.

Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Muli Ben-Yehuda <mulix@mulix.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: iommu@lists.linux-foundation.org
Link: http://lkml.kernel.org/r/20180319103826.12853-6-hch@lst.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-20 10:01:57 +01:00
Christoph Hellwig
6e4bf58677 x86/dma: Use generic swiotlb_ops
The generic swiotlb DMA ops were based on the x86 ones and provide
equivalent functionality, so use them.

Also fix the sta2x11 case.  For that SOC the DMA map ops need an
additional physical to DMA address translations.  For swiotlb buffers
that is done throught the phys_to_dma helper, but the sta2x11_dma_ops
also added an additional translation on the return value from
x86_swiotlb_alloc_coherent, which is only correct if that functions
returns a direct allocation and not a swiotlb buffer.  With the
generic swiotlb and DMA-direct code phys_to_dma is not always used
and the separate sta2x11_dma_ops can be replaced with a simple
bit that marks if the additional physical to DMA address translation
is needed.

Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Muli Ben-Yehuda <mulix@mulix.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: iommu@lists.linux-foundation.org
Link: http://lkml.kernel.org/r/20180319103826.12853-5-hch@lst.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-20 10:01:57 +01:00
Christoph Hellwig
fec777c385 x86/dma: Use DMA-direct (CONFIG_DMA_DIRECT_OPS=y)
The generic DMA-direct (CONFIG_DMA_DIRECT_OPS=y) implementation is now
functionally equivalent to the x86 nommu dma_map implementation, so
switch over to using it.

That includes switching from using x86_dma_supported in various IOMMU
drivers to use dma_direct_supported instead, which provides the same
functionality.

Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Muli Ben-Yehuda <mulix@mulix.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: iommu@lists.linux-foundation.org
Link: http://lkml.kernel.org/r/20180319103826.12853-4-hch@lst.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-20 10:01:56 +01:00
Christoph Hellwig
038d07a283 x86/dma: Remove dma_alloc_coherent_mask()
These days all devices (including the ISA fallback device) have a coherent
DMA mask set, so remove the workaround.

Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Muli Ben-Yehuda <mulix@mulix.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: iommu@lists.linux-foundation.org
Link: http://lkml.kernel.org/r/20180319103826.12853-3-hch@lst.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-20 10:01:56 +01:00
Ingo Molnar
3eb93ea327 Merge branch 'x86/mm' into x86/dma, to pick up dependencies
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-20 10:01:37 +01:00
Christoph Hellwig
5927145efd x86/cpu: Remove the CONFIG_X86_PPRO_FENCE=y quirk
There were only a few Pentium Pro multiprocessors systems where this
errata applied. They are more than 20 years old now, and we've slowly
dropped places which put the workarounds in and discouraged anyone
from enabling the workaround.

Get rid of it for good.

Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Muli Ben-Yehuda <mulix@mulix.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: iommu@lists.linux-foundation.org
Link: http://lkml.kernel.org/r/20180319103826.12853-2-hch@lst.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-20 10:01:05 +01:00
Jarkko Nikula
613bd1ea38
spi: Fix unregistration of controller with fixed SPI bus number
Commit 9b61e30221 (spi: Pick spi bus number from Linux idr or spi alias)
ceased to unregister SPI buses with fixed bus numbers. Moreover this is
visible only if CONFIG_SPI_DEBUG=y is set or when trying to re-register
the same SPI controller.

rmmod spi_pxa2xx_platform (with CONFIG_SPI_DEBUG=y):
[   26.788362] spi_master spi1: attempting to delete unregistered controller [spi1]

modprobe spi_pxa2xx_platform:
[   37.883137] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:19.0/pxa2xx-spi.12/spi_master/spi1'
[   37.894984] CPU: 1 PID: 1467 Comm: modprobe Not tainted 4.16.0-rc4+ #21
[   37.902384] Call Trace:
...
[   38.122680] kobject_add_internal failed for spi1 with -EEXIST, don't try to register things with the same name in the same directory.
[   38.136154] WARNING: CPU: 1 PID: 1467 at lib/kobject.c:238 kobject_add_internal+0x2a5/0x2f0
...
[   38.513817] pxa2xx-spi pxa2xx-spi.12: problem registering spi master
[   38.521036] pxa2xx-spi: probe of pxa2xx-spi.12 failed with error -17

Fix this by not returning immediately from spi_unregister_controller() if
idr_find() doesn't find controller with given ID/bus number. It finds
only those controllers that were registered with dynamic SPI bus
numbers. Only conditional cleanup between dynamic and fixed bus numbers
is to remove allocated IDR.

Fixes: 9b61e30221 (spi: Pick spi bus number from Linux idr or spi alias)
Cc: stable@vger.kernel.org
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-20 17:00:19 +08:00
Greg Kroah-Hartman
a8f25c36f7 Merge branch 4.16-rc6 into usb-next
We want the USB fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-20 09:56:08 +01:00
Miquel Raynal
107b7d6a7a mtd: rawnand: avoid setting again the timings to mode 0 after a reset
After a nand_reset_data_interface(), both the NAND chip and the NAND
controller use timing mode 0. The previously defined data interface for
this chip has been saved and is supposed to be restored after that.
However, if the saved data interface also refers to timing mode 0, there
is no need to re-apply them again.

Also, as nand_setup_data_interface() uses ->set/get_features(), it could
lead to issues when doing the reset at probe time as the parameter page
is not available yet to know if these functions are supported or not.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-20 09:51:01 +01:00
Miquel Raynal
415ae78ffb mtd: rawnand: check ONFI timings have been acked by the chip
Choosing ONFI timings when ->set/get_features() calls are supported
by the NAND chip is a matter of reading the chip's ONFI parameter page
and telling the chip the chosen mode (between all of the supported ones)
with ->set_feature().

Add a check on whether the chip "acked" the timing mode or not.

This can be a problem for NAND chips that do not follow entirely the
ONFI specification. These chips actually support other modes than
"mode 0", but either:
1/ do not update the timing mode register once a timing mode has been
   selected.
or
2/ do not support the TIMING_MODE featured and thus do not require users
   to change the timing mode at all.

These issues will be addressed in another patch that will add the
feature to overwrite NAND chips features within the parameter page, from
the NAND chip driver.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Tested-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-20 09:49:41 +01:00
Miquel Raynal
29714d6bd7 mtd: rawnand: move calls to ->select_chip() in nand_setup_data_interface()
After a ->set_features(TIMINGS), the chip is supposed to be working at a
new speed. In order for all the transactions to be perperly handled, the
NAND controller should also be configured to this same speed. Calling
->setup_data_interface() is not enough and the chip should be
de-asserted/re-asserted through calls to ->select_chip().

Prepare the next change in nand_setup_data_interface() where timings
will be checked after being applied. Because assertions of the CS pin
will be needed from within this function, move the calls to
->select_chip() inside nand_setup_data_interface() for later
consistency.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-20 09:49:11 +01:00
Miquel Raynal
939da44758 mtd: rawnand: mxc: remove useless checks in GET/SET_FEATURES functions
All the calls to the chip's hooks ->get/set_features() go through
the core's wrappers nand_get/set_features() that already do the
necessary checks about feature support. Remove these
checks from the mxc's functions.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-20 09:48:45 +01:00
Miquel Raynal
993447b746 mtd: rawnand: handle differently chip/controller errors about timings
Usually, the source of the error when setting/getting features does not
matter (if the controller does not support sending the command or if
the chip does not support the operation).

When it comes to timings, if the controller fails it is an error while
if the chip does not support the operation, it can be silently supposed
that it already works with the maximum supported timings.

Introduce some logic in nand_setup_data_interface() to handle that
difference.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-20 09:47:46 +01:00
Miquel Raynal
97baea1e6b mtd: rawnand: use wrappers to call onfi GET/SET_FEATURES
Prepare the fact that some features managed by GET/SET_FEATURES could be
overloaded by vendor code. To handle this logic, use new wrappers
instead of directly call the ->get/set_features() hooks.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-20 09:46:02 +01:00
Miquel Raynal
b958758e68 mtd: rawnand: rename SET/GET FEATURES related functions
SET/GET FEATURES are flagged ONFI-compliant because of their name. This
is not accurate as non-ONFI NAND chips support it and use it.

Rename the hooks and helpers to remove the "onfi" prefix.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-20 09:33:22 +01:00
Miquel Raynal
fc2f30a4b4 mtd: rawnand: rename default ->onfi_get/set_features() implementations
Prepare future work on the ->onfi_get/set_features() hooks by renaming
the core's implementation as 'default' ones.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-20 09:33:20 +01:00
Joe Lawrence
e9ca267096 sched/debug: Adjust newlines for better alignment
Scheduler debug stats include newlines that display out of alignment
when prefixed by timestamps.  For example, the dmesg utility:

  % echo t > /proc/sysrq-trigger
  % dmesg
  ...
  [   83.124251]
  runnable tasks:
   S           task   PID         tree-key  switches  prio     wait-time
  sum-exec        sum-sleep
  -----------------------------------------------------------------------------------------------------------

At the same time, some syslog utilities (like rsyslog by default) don't
like the additional newlines control characters, saving lines like this
to /var/log/messages:

  Mar 16 16:02:29 localhost kernel: #012runnable tasks:#012 S           task   PID         tree-key ...
                                    ^^^^               ^^^^
Clean these up by moving newline characters to their own SEQ_printf
invocation.  This leaves the /proc/sched_debug unchanged, but brings the
entire output into alignment when prefixed:

  % echo t > /proc/sysrq-trigger
  % dmesg
  ...
  [   62.410368] runnable tasks:
  [   62.410368]  S           task   PID         tree-key  switches  prio     wait-time             sum-exec        sum-sleep
  [   62.410369] -----------------------------------------------------------------------------------------------------------
  [   62.410369]  I  kworker/u12:0     5      1932.215593       332   120         0.000000         3.621252         0.000000 0 0 /

and no escaped control characters from rsyslog in /var/log/messages:

  Mar 16 16:15:06 localhost kernel: runnable tasks:
  Mar 16 16:15:06 localhost kernel: S           task   PID         tree-key  ...

Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1521484555-8620-3-git-send-email-joe.lawrence@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-20 09:30:09 +01:00
Joe Lawrence
a8c024cd9b sched/debug: Fix per-task line continuation for console output
When the SEQ_printf() macro prints to the console, it runs a simple
printk() without KERN_CONT "continued" line printing.  The result of
this is oddly wrapped task info, for example:

  % echo t > /proc/sysrq-trigger
  % dmesg
  ...
  runnable tasks:
  ...
  [   29.608611]  I
  [   29.608613]       rcu_sched     8      3252.013846      4087   120
  [   29.608614]         0.000000        29.090111         0.000000
  [   29.608615]  0 0
  [   29.608616]  /

Modify SEQ_printf to use pr_cont() for expected one-line results:

  % echo t > /proc/sysrq-trigger
  % dmesg
  ...
  runnable tasks:
  ...
  [  106.716329]  S        cpuhp/5    37      2006.315026        14   120         0.000000         0.496893         0.000000 0 0 /

Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1521484555-8620-2-git-send-email-joe.lawrence@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-20 09:30:09 +01:00
Luis R. Rodriguez
995e8695f6 firmware: ensure the firmware cache is not used on incompatible calls
request_firmware_into_buf() explicitly disables the firmware cache,
meanwhile the firmware cache cannot be used when request_firmware_nowait()
is used without the uevent. Enforce a sanity check for this to avoid future
issues undocumented behaviours should misuses of the firmware cache
happen later.

One of the reasons we want to enforce this is the firmware cache is
used for helping with suspend/resume, and if incompatible calls use it
they can stall suspend.

Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-20 09:28:47 +01:00
Luis R. Rodriguez
9952db75e0 test_firmware: modify custom fallback tests to use unique files
Users of the custom firmware fallback interface is are not supposed to
use the firmware cache interface, this can happen if for instance the
one of the APIs which use the firmware cache is used first with one
firmware file and then the request_firmware_nowait(uevent=false) API
is used with the same file.

We'll soon become strict about this on the firmware interface to reject
such calls later, so correct the test scripts to avoid such uses as well.
We address this on the tests scripts by simply using unique names when
testing the custom fallback interface.

Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-20 09:28:47 +01:00
Luis R. Rodriguez
3194d06a7e firmware: add helper to check to see if fw cache is setup
Add a helper to check if the firmware cache is already setup for a device.
This will be used later.

Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-20 09:28:47 +01:00
Luis R. Rodriguez
d15d731155 firmware: fix checking for return values for fw_add_devm_name()
Currently fw_add_devm_name() returns 1 if the firmware cache
was already set. This makes it complicated for us to check for
correctness. It is actually non-fatal if the firmware cache
is already setup, so just return 0, and simplify the checkers.

fw_add_devm_name() adds device's name onto the devres for the
device so that prior to suspend we cache the firmware onto memory,
so that on resume the firmware is reliably available. We never
were checking for success for this call though, meaning in some
really rare cases we my have never setup the firmware cache for
a device, which could in turn make resume fail.

This is all theoretical, no known issues have been reported.
This small issue has been present way since the addition of the
devres firmware cache names on v3.7.

Fixes: f531f05ae9 ("firmware loader: store firmware name into devres list")
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-20 09:28:47 +01:00
Luis R. Rodriguez
60fa74263c rename: _request_firmware_load() fw_load_sysfs_fallback()
This reflects much clearer what is being done.
While at it, kdoc'ify it.

Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-20 09:28:47 +01:00
Luis R. Rodriguez
b3cf21fae1 test_firmware: test three firmware kernel configs using a proc knob
Since we now have knobs to twiddle what used to be set on kernel
configurations we can build one base kernel configuration and modify
behaviour to mimic such kernel configurations to test them.

Provided you build a kernel with:

CONFIG_TEST_FIRMWARE=y
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_USER_HELPER=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y

We should now be able test all possible kernel configurations
when FW_LOADER=y. Note that when FW_LOADER=m we just don't provide
the built-in functionality of the built-in firmware.

If you're on an old kernel and either don't have /proc/config.gz
(CONFIG_IKCONFIG_PROC) or haven't enabled CONFIG_FW_LOADER_USER_HELPER
we cannot run these dynamic tests, so just run both scripts just
as we used to before making blunt assumptions about your setup
and requirements exactly as we did before.

Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-20 09:28:47 +01:00
Luis R. Rodriguez
f5a614519e test_firmware: expand on library with shared helpers
This expands our library with as many things we could find which
both scripts we use share.

Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-20 09:28:47 +01:00
Luis R. Rodriguez
2cd7a1c6dc firmware: enable to force disable the fallback mechanism at run time
You currently need four different kernel builds to test the firmware
API fully. By adding a proc knob to force disable the fallback mechanism
completely we are able to reduce the amount of kernels you need built
to test the firmware API down to two.

Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-20 09:28:47 +01:00
Luis R. Rodriguez
ceb1813224 firmware: enable run time change of forcing fallback loader
Currently one requires to test four kernel configurations to test the
firmware API completely:

0)
  CONFIG_FW_LOADER=y

1)
  o CONFIG_FW_LOADER=y
  o CONFIG_FW_LOADER_USER_HELPER=y

2)
  o CONFIG_FW_LOADER=y
  o CONFIG_FW_LOADER_USER_HELPER=y
  o CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y

3) When CONFIG_FW_LOADER=m the built-in stuff is disabled, we have
   no current tests for this.

We can reduce the requirements to three kernel configurations by making
fw_config.force_sysfs_fallback a proc knob we flip on off. For kernels that
disable CONFIG_IKCONFIG_PROC this can also enable one to inspect if
CONFIG_FW_LOADER_USER_HELPER_FALLBACK was enabled at build time by checking
the proc value at boot time.

Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-20 09:28:47 +01:00
Luis R. Rodriguez
5d6d1ddd27 firmware: move firmware loader into its own directory
This will make it much easier to manage as we manage to
keep trimming componnents down into their own files to more
easily manage and maintain this codebase.

Suggested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-20 09:28:46 +01:00
Luis R. Rodriguez
d73f821c7a firmware: split firmware fallback functionality into its own file
The firmware fallback code is optional. Split that code out to help
distinguish the fallback functionlity from othere core firmware loader
features. This should make it easier to maintain and review code
changes.

The reason for keeping the configuration onto a table which is built-in
if you enable firmware loading is so that we can later enable the kernel
after subsequent patches to tweak this configuration, even if the
firmware loader is modular.

This introduces no functional changes.

Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-20 09:28:46 +01:00
Luis R. Rodriguez
e05cb73f83 firmware: move loading timeout under struct firmware_fallback_config
The timeout is a fallback construct, so we can just stuff the
timeout configuration under struct firmware_fallback_config.

While at it, add a few helpers which vets the use of getting or
setting the timeout as an int. The main use of the timeout is
to set a timeout for completion, and that is used as an unsigned
long. There a few cases however where it makes sense to get or
set the timeout as an int, the helpers annotate these use cases
have been properly vetted for.

Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-20 09:28:46 +01:00
Luis R. Rodriguez
5d9566b144 firmware: use helpers for setting up a temporary cache timeout
We only use the timeout for the firmware fallback mechanism
except for trying to set the timeout during the cache setup
for resume/suspend. For those cases, setting the timeout should
be a no-op, so just reflect this in code by adding helpers for it.

This change introduces no functional changes.

Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-20 09:28:46 +01:00
Luis R. Rodriguez
b2e9a8553c firmware: simplify CONFIG_FW_LOADER_USER_HELPER_FALLBACK further
All CONFIG_FW_LOADER_USER_HELPER_FALLBACK really is, is just a bool,
initailized at build time. Define it as such. This simplifies the
logic even further, removing now all explicit #ifdefs around the code.

Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-20 09:28:46 +01:00
Karthikeyan Ramasubramanian
c4f528795d tty: serial: msm_geni_serial: Add serial driver support for GENI based QUP
This driver supports GENI based UART Controller in the Qualcomm SOCs. The
Qualcomm Generic Interface (GENI) is a programmable module supporting a
wide range of serial interfaces including UART. This driver support console
operations using FIFO mode of transfer.

Signed-off-by: Girish Mahadevan <girishm@codeaurora.org>
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@codeaurora.org>
Signed-off-by: Sagar Dharia <sdharia@codeaurora.org>
Signed-off-by: Doug Anderson <dianders@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-20 09:13:15 +01:00
Greg Kroah-Hartman
6f005302a2 thunderbolt: Changes for v4.17 merge window
New features:
 
   - Intel Titan Ridge Thunderbolt 3 controller support
   - Preboot ACL supported, allowing more secure way to boot from
     Thunderbolt devices
   - New "USB only" security level
 
 In addition there are a couple of fixes for increasing timeout when
 authenticating the ICM firmware and reading root switch config space.
 Preventing a crash on certain Lenovo systems where ICM firmware for some
 reason is not always properly starting up.
 -----BEGIN PGP SIGNATURE-----
 
 iQJUBAABCgA+FiEEVTdhRGBbNzLrSUBaAP2fSd+ZWKAFAlqv0YkgHG1pa2Eud2Vz
 dGVyYmVyZ0BsaW51eC5pbnRlbC5jb20ACgkQAP2fSd+ZWKAw6g/8DNd+WFZv33ZQ
 Tf9opaSNIYC1HyOfemr9anSTGUX/Dh83/wGktfijRoB5I/4D2zdVjvFoyW6i2Dnj
 a2eugpN3lw275Fry4DEa/9cjS4v1ju2ZhzXaGqknSBB+JgEtV5ScVAYLzr5mLp0e
 r7LZJeQ7rXl/RD2YqMxhg3E07YyVr3dNsQtVxae6nupQQdhEyKfIzxKyqkjeAbtZ
 R5ZzbKCtbY8k7HQkIiQDHJrxIeShHX7cHYf6CpbCKjKSJBM5xOL2h6r+h/KV0J8y
 ueX+GpW9BRIiF9mrsOjlhTFfODPxeaB5DzL7b5TR+08gLTcmzYN/rlT95c9eWHj2
 eneBIYQ78V60hnCaZds/cU+kCDkT4xgr18nDsLqwPCLeoLZ9a0w8ZIqhzvp5efaE
 baExuEHgE4BDCc6an8Pf4qebiLi9hxSZd9CvtvgGwJwisdaEEaFT32fwMFxNNEHW
 WMN3jhf5qOHKwACDYSUVNSMPQ4OVP2U4G3zraTDrJgqrAVyy34LYa4ciJvB9BBEU
 GiMm90Nj9U9apHKbZzjH0RrP5YLCZ2Gf5fC4Y7bpWvy9JFD+GHkhYPGrPY5av/gT
 GROZIUTggWPoW8nV8RViPTrtLcMtE+j5HdtpXhy1s+k8ozdZUtcET/EpunU1ExWJ
 UEJ3vOQanhGVxhO7EEXlBG0IJRnCYRA=
 =3yu4
 -----END PGP SIGNATURE-----

Merge tag 'thunderbolt-for-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into char-misc-next

Mike writes:

thunderbolt: Changes for v4.17 merge window

New features:

  - Intel Titan Ridge Thunderbolt 3 controller support
  - Preboot ACL supported, allowing more secure way to boot from
    Thunderbolt devices
  - New "USB only" security level

In addition there are a couple of fixes for increasing timeout when
authenticating the ICM firmware and reading root switch config space.
Preventing a crash on certain Lenovo systems where ICM firmware for some
reason is not always properly starting up.
2018-03-20 09:11:31 +01:00
Song Liu
c917e0f259 perf/cgroup: Fix child event counting bug
When a perf_event is attached to parent cgroup, it should count events
for all children cgroups:

   parent_group   <---- perf_event
     \
      - child_group  <---- process(es)

However, in our tests, we found this perf_event cannot report reliable
results. Here is an example case:

  # create cgroups
  mkdir -p /sys/fs/cgroup/p/c
  # start perf for parent group
  perf stat -e instructions -G "p"

  # on another console, run test process in child cgroup:
  stressapptest -s 2 -M 1000 & echo $! > /sys/fs/cgroup/p/c/cgroup.procs

  # after the test process is done, stop perf in the first console shows

       <not counted>      instructions              p

The instruction should not be "not counted" as the process runs in the
child cgroup.

We found this is because perf_event->cgrp and cpuctx->cgrp are not
identical, thus perf_event->cgrp are not updated properly.

This patch fixes this by updating perf_cgroup properly for ancestor
cgroup(s).

Reported-by: Ephraim Park <ephiepark@fb.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <jolsa@redhat.com>
Cc: <kernel-team@fb.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/20180312165943.1057894-1-songliubraving@fb.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-20 08:58:47 +01:00
Kan Liang
320b0651f3 perf/x86/intel/uncore: Fix multi-domain PCI CHA enumeration bug on Skylake servers
The number of CHAs is miscalculated on multi-domain PCI Skylake server systems,
resulting in an uncore driver initialization error.

Gary Kroening explains:

 "For systems with a single PCI segment, it is sufficient to look for the
  bus number to change in order to determine that all of the CHa's have
  been counted for a single socket.

  However, for multi PCI segment systems, each socket is given a new
  segment and the bus number does NOT change.  So looking only for the
  bus number to change ends up counting all of the CHa's on all sockets
  in the system.  This leads to writing CPU MSRs beyond a valid range and
  causes an error in ivbep_uncore_msr_init_box()."

To fix this bug, query the number of CHAs from the CAPID6 register:
it should read bits 27:0 in the CAPID6 register located at
Device 30, Function 3, Offset 0x9C. These 28 bits form a bit vector
of available LLC slices and the CHAs that manage those slices.

Reported-by: Kroening, Gary <gary.kroening@hpe.com>
Tested-by: Kroening, Gary <gary.kroening@hpe.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: abanman@hpe.com
Cc: dimitri.sivanich@hpe.com
Cc: hpa@zytor.com
Cc: mike.travis@hpe.com
Cc: russ.anderson@hpe.com
Fixes: cd34cd97b7 ("perf/x86/intel/uncore: Add Skylake server uncore support")
Link: http://lkml.kernel.org/r/1520967094-13219-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-20 08:58:47 +01:00
Kan Liang
174afc3e7d perf/x86/intel: Rename confusing 'freerunning PEBS' API and implementation to 'large PEBS'
The 'freerunning PEBS' and 'large PEBS' are the same thing. Both of these
names appear in the code and in the API, which causes confusion.

Rename 'freerunning PEBS' to 'large PEBS' to unify the code,
which eliminates the confusion.

No functional change.

Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1520865937-22910-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-20 08:58:29 +01:00
Josh Poimboeuf
578ae447e7 jump_label: Disable jump labels in __exit code
With the following commit:

  3335224470 ("jump_label: Explicitly disable jump labels in __init code")

... we explicitly disabled jump labels in __init code, so they could be
detected and not warned about in the following commit:

  dc1dd184c2 ("jump_label: Warn on failed jump_label patching attempt")

In-kernel __exit code has the same issue.  It's never used, so it's
freed along with the rest of initmem.  But jump label entries in __exit
code aren't explicitly disabled, so we get the following warning when
enabling pr_debug() in __exit code:

  can't patch jump_label at dmi_sysfs_exit+0x0/0x2d
  WARNING: CPU: 0 PID: 22572 at kernel/jump_label.c:376 __jump_label_update+0x9d/0xb0

Fix the warning by disabling all jump labels in initmem (which includes
both __init and __exit code).

Reported-and-tested-by: Li Wang <liwang@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: dc1dd184c2 ("jump_label: Warn on failed jump_label patching attempt")
Link: http://lkml.kernel.org/r/7121e6e595374f06616c505b6e690e275c0054d1.1521483452.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-20 08:57:17 +01:00
Stephane Eranian
e340895c9e perf/x86/intel/uncore: Add missing filter constraint for SKX CHA event
Adding a filter constraint for Intel Skylake CHA event
UNC_CHA_UPI_CREDITS_ACQUIRED (0x38).

The event supports core-id/thread-id and link filtering.

Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1520869294-14176-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-20 08:53:32 +01:00
Dan Carpenter
e5ea9b54a0 perf/x86/intel: Don't accidentally clear high bits in bdw_limit_period()
We intended to clear the lowest 6 bits but because of a type bug we
clear the high 32 bits as well.  Andi says that periods are rarely more
than U32_MAX so this bug probably doesn't have a huge runtime impact.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Fixes: 294fe0f52a ("perf/x86/intel: Add INST_RETIRED.ALL workarounds")
Link: http://lkml.kernel.org/r/20180317115216.GB4035@mwanda
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-20 08:53:31 +01:00