Cross-merge networking fixes after downstream PR (net-6.12-rc4).
Conflicts:
107a034d5c ("net/mlx5: qos: Store rate groups in a qos domain")
1da9cfd6c4 ("net/mlx5: Unregister notifier on eswitch init failure")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In NC-SI specification, NC-SI is using RMII, not MII.
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Message-ID: <20241018053331.1900100-1-jacky_chou@aspeedtech.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
There are some spelling mistakes of 'accelaration', 'exprienced' and
'rewritting' in comments which should be 'acceleration', 'experienced'
and 'rewriting'.
Suggested-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/all/20241017162846.GA51712@kernel.org/
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Message-ID: <90D42CB167CA0842+20241018021910.31359-1-wangyuli@uniontech.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Register a6d/12 is shadowing register MDIO_AN_EEE_ADV2. So this line
disables advertisement of EEE at 2.5G. Latest vendor driver r8125
doesn't do this (any longer?), so this mode seems to be safe.
EEE saves quite some energy, therefore enable this mode per default.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Message-ID: <95dd5a0c-09ea-4847-94d9-b7aa3063e8ff@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
The first boards show up with Realtek's RTL8125D. This MAC/PHY chip
comes with an integrated 2.5Gbps PHY with ID 0x001cc841. It's not
clear yet whether there's an external version of this PHY and how
Realtek calls it, therefore use the numeric id for now.
Link: https://lore.kernel.org/netdev/2ada65e1-5dfa-456c-9334-2bc51272e9da@gmail.com/T/
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Message-ID: <7d2924de-053b-44d2-a479-870dc3878170@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Run airoha_qdma_cleanup_tx_queue() in ndo_stop callback in order to
unmap pending skbs. Moreover, reset BQL txq state stopping the netdevice,
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Hariprasad Kelam <hkelam@marvell.com>
Message-ID: <20241017-airoha-en7581-reset-bql-v1-1-08c0c9888de5@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
This patch propagates error code correctly in cal_cycle()
and improve with FIELD_GET().
Signed-off-by: SkyLake.Huang <skylake.huang@mediatek.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
This patch shrinks line wrapping to 80 chars. Also, in
tx_amp_fill_result(), use FIELD_PREP() to prettify code.
Signed-off-by: SkyLake.Huang <skylake.huang@mediatek.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
This patch fixes spelling errors, re-arrange vars with
reverse Xmas tree and remove unnecessary parens in
mediatek-ge-soc.c.
Signed-off-by: SkyLake.Huang <skylake.huang@mediatek.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Remove rtl_dash_loop_wait_high/low to simplify the code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Message-ID: <fb8c490c-2d92-48f5-8bbf-1fc1f2ee1649@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
In case of a problem with firmware loading we inform at the driver level,
in addition the firmware load code itself issues warnings. Therefore
switch to firmware_request_nowarn() to avoid duplicated error messages.
In addition switch to warn level because the firmware is optional and
typically just fixes compatibility issues.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Message-ID: <d9c5094c-89a6-40e2-b5fe-8df7df4624ef@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
So far we use a custom flag to define when a task can be scheduled and
when not. Let's use the standard mechanism with disable_work() et al
instead.
Note that in rtl8169_close() we can remove the call to cancel_work()
because we now call disable_work_sync() in rtl8169_down() already.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
There's not really a benefit here in taking the RTNL lock. The task
handler does exception handling only, so we're in trouble anyway when
we come here, and there's no need to protect against e.g. a parallel
ethtool call.
A benefit of removing the RTNL lock here is that we now can
synchronously cancel the workqueue from a context holding the RTNL mutex.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
fbnic fails to link as built-in when PTP support is in a loadable
module:
aarch64-linux-ld: drivers/net/ethernet/meta/fbnic/fbnic_ethtool.o: in function `fbnic_get_ts_info':
fbnic_ethtool.c:(.text+0x428): undefined reference to `ptp_clock_index'
aarch64-linux-ld: drivers/net/ethernet/meta/fbnic/fbnic_time.o: in function `fbnic_time_start':
fbnic_time.c:(.text+0x820): undefined reference to `ptp_schedule_worker'
aarch64-linux-ld: drivers/net/ethernet/meta/fbnic/fbnic_time.o: in function `fbnic_ptp_setup':
fbnic_time.c:(.text+0xa68): undefined reference to `ptp_clock_register'
Add the appropriate dependency to enforce this.
Fixes: 6a2b3ede95 ("eth: fbnic: add RX packets timestamping support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Message-ID: <20241016062303.2551686-1-arnd@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
The function vxlan_snoop() returns drop reasons now, so update the
document of it too.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace the drop reason "SKB_DROP_REASON_VXLAN_INVALID_HDR" with
"SKB_DROP_REASON_VXLAN_VNI_NOT_FOUND" in encap_bypass_if_local(), as the
latter is more accurate.
Fixes: 790961d88b ("net: vxlan: use kfree_skb_reason() in encap_bypass_if_local()")
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix typo in airoha_fe_init routine configuring CDM2_OAM_QSEL_MASK field
of REG_CDM2_FWD_CFG register.
This bug is not introducing any user visible problem since Frame Engine
CDM2 port is used just by the second QDMA block and we currently enable
just QDMA1 block connected to the MT7530 dsa switch via CDM1 port.
Introduced by commit 23020f0493 ("net: airoha: Introduce ethernet
support for EN7581 SoC")
Reported-by: ChihWei Cheng <chihwei.cheng@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Message-ID: <20241015-airoha-eth-cdm2-fixes-v1-1-9dc6993286c3@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
The GbEth IP supports offloading checksum calculation for VLAN-tagged
packets, provided that the EtherType is 0x8100 and only one VLAN tag is
present.
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
The GbEth IP supports offloading IPv6 TCP, UDP & ICMPv6 checksums in the
TX path.
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
The GbEth IP supports offloading IPv6 TCP, UDP & ICMPv6 checksums in the
RX path.
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
The GbEth IP will pass through a zero UDP checksum without asserting any
error flags so we do not need to resort to software checksum calculation
in this case.
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
For IPv4 packets, the header checksum will always be calculated in software
in the TX path (Documentation/networking/checksum-offloads.rst says "No
offloading of the IP header checksum is performed; it is always done in
software.") so there is no advantage in asking the hardware to also
calculate this checksum.
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
The hardware checksum value is used as a 16-bit flag, it is zero when
the checksum has been validated and non-zero otherwise. Therefore we
don't need to treat this as an actual __wsum type or call csum_unfold(),
we can just use a u16 pointer.
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
We can merge the two if conditions on skb_is_nonlinear(). Since
skb_frag_size_sub() and skb_trim() do not free memory, it is still safe
to access the trimmed bytes at the end of the packet after these calls.
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
We do not need to confirm that the protocol is IPv4. If the hardware
encounters an unsupported protocol, it will set the checksum value to
0xFFFF.
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
For IPv4 packets, the header checksum will always be checked in software
in the RX path (inet_gro_receive() calls ip_fast_csum() unconditionally)
so there is no advantage in asking the hardware to also calculate this
checksum.
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Introduce new constants for the CSR1 (TX) and CSR2 (RX) checksum enable
bits, removing the risk of inconsistency when we change which flags we
enable.
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
GCC is not happy with the current code, e.g.:
.../tg3.c:11313:37: error: ‘-txrx-’ directive output may be truncated writing 6 bytes into a region of size between 1 and 16 [-Werror=format-truncation=]
11313 | "%s-txrx-%d", tp->dev->name, irq_num);
| ^~~~~~
.../tg3.c:11313:34: note: using the range [-2147483648, 2147483647] for directive argument
11313 | "%s-txrx-%d", tp->dev->name, irq_num);
When `make W=1` is supplied, this prevents kernel building. Fix it by
increasing the buffer size for IRQ label and use sizeoF() instead of
hard coded constants.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Message-ID: <20241016090647.691022-1-andriy.shevchenko@linux.intel.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
With DSA's implementation of the mac_select_pcs() method removed, we
can now remove the detection of mac_select_pcs() implementation.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
When the mac_select_pcs() method is not implemented, there is no way
for pl->pcs to be set to a non-NULL value. This was here to support
the old phylink_set_pcs() method which has been removed a few years
ago. Simplify the code in phylink_validate_mac_and_pcs().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
phylink has historically not permitted a PCS to be removed. An attempt
to permit this with phylink_set_pcs() resulted in comments indicating
that there was no need for this. This behaviour has been propagated
forward to the mac_select_pcs() approach as it was believed from these
comments that changing this would be NAK'd.
However, with mac_select_pcs(), it takes more code and thus complexity
to maintain this behaviour, which can - and in this case has - resulted
in a bug. If mac_select_pcs() returns NULL for a particular interface
type, but there is already a PCS in-use, then we skip the pcs_validate()
method, but continue using the old PCS. Also, it wouldn't be expected
behaviour by implementers of mac_select_pcs().
Allow this by removing this old unnecessary restriction.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Rather than returning an EOPNOTSUPP error pointer when the switch
has no support for PCS, return NULL to indicate that no PCS is
required.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
There is no longer any reason to implement the mac_select_pcs()
callback in DSA. Returning ERR_PTR(-EOPNOTSUPP) is functionally
equivalent to not providing the function.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Use %*ph format to print small buffer as hex string. It will change
the output format from 32-bit words to byte hexdump, but this is not
critical as it's only a debug message.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Message-ID: <20241016132615.899037-1-andriy.shevchenko@linux.intel.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
In sr_mdio_read() the local variable res is used to store both
little-endian and host byte order values. This prevents Sparse
from helping us by flagging when endian miss matches occur - the
detection process hinges on the type of variables matching the
byte order of values stored in them.
Address this by adding a new local variable, word, to store little-endian
values; change the type of res to int, and use it to store host-byte
order values.
Flagged by Sparse as:
.../sr9700.c:205:21: warning: incorrect type in assignment (different base types)
.../sr9700.c:205:21: expected restricted __le16 [addressable] [usertype] res
.../sr9700.c:205:21: got int
.../sr9700.c:207:21: warning: incorrect type in assignment (different base types)
.../sr9700.c:207:21: expected restricted __le16 [addressable] [usertype] res
.../sr9700.c:207:21: got int
.../sr9700.c:212:16: warning: incorrect type in return expression (different base types)
.../sr9700.c:212:16: expected int
.../sr9700.c:212:16: got restricted __le16 [addressable] [usertype] res
Compile tested only.
No functional change intended.
Signed-off-by: Simon Horman <horms@kernel.org>
Message-ID: <20241016-blackbird-le16-v1-1-97ba8de6b38f@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
The *ndev pointer needs to be set or it leads to an uninitialized variable
bug in the caller.
Fixes: 4a7b2ba94a ("net: ethernet: ti: am65-cpsw: Use tstats instead of open coded version")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Message-ID: <b168d5c7-704b-4452-84f9-1c1762b1f4ce@stanley.mountain>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Current release - new code bugs:
- eth: mlx5: HWS, don't destroy more bwc queue locks than allocated
Previous releases - regressions:
- ipv4: give an IPv4 dev to blackhole_netdev
- udp: compute L4 checksum as usual when not segmenting the skb
- tcp/dccp: don't use timer_pending() in reqsk_queue_unlink().
- eth: mlx5e: don't call cleanup on profile rollback failure
- eth: microchip: vcap api: fix memory leaks in vcap_api_encode_rule_test()
- eth: enetc: disable Tx BD rings after they are empty
- eth: macb: avoid 20s boot delay by skipping MDIO bus registration for fixed-link PHY
Previous releases - always broken:
- posix-clock: fix missing timespec64 check in pc_clock_settime()
- genetlink: hold RCU in genlmsg_mcast()
- mptcp: prevent MPC handshake on port-based signal endpoints
- eth: vmxnet3: fix packet corruption in vmxnet3_xdp_xmit_frame
- eth: stmmac: dwmac-tegra: fix link bring-up sequence
- eth: bcmasp: fix potential memory leak in bcmasp_xmit()
Misc:
- add Andrew Lunn as a co-maintainer of all networking drivers
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=ukTi
-----END PGP SIGNATURE-----
Merge tag 'net-6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Current release - new code bugs:
- eth: mlx5: HWS, don't destroy more bwc queue locks than allocated
Previous releases - regressions:
- ipv4: give an IPv4 dev to blackhole_netdev
- udp: compute L4 checksum as usual when not segmenting the skb
- tcp/dccp: don't use timer_pending() in reqsk_queue_unlink().
- eth: mlx5e: don't call cleanup on profile rollback failure
- eth: microchip: vcap api: fix memory leaks in
vcap_api_encode_rule_test()
- eth: enetc: disable Tx BD rings after they are empty
- eth: macb: avoid 20s boot delay by skipping MDIO bus registration
for fixed-link PHY
Previous releases - always broken:
- posix-clock: fix missing timespec64 check in pc_clock_settime()
- genetlink: hold RCU in genlmsg_mcast()
- mptcp: prevent MPC handshake on port-based signal endpoints
- eth: vmxnet3: fix packet corruption in vmxnet3_xdp_xmit_frame
- eth: stmmac: dwmac-tegra: fix link bring-up sequence
- eth: bcmasp: fix potential memory leak in bcmasp_xmit()
Misc:
- add Andrew Lunn as a co-maintainer of all networking drivers"
* tag 'net-6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
net/mlx5e: Don't call cleanup on profile rollback failure
net/mlx5: Unregister notifier on eswitch init failure
net/mlx5: Fix command bitmask initialization
net/mlx5: Check for invalid vector index on EQ creation
net/mlx5: HWS, use lock classes for bwc locks
net/mlx5: HWS, don't destroy more bwc queue locks than allocated
net/mlx5: HWS, fixed double free in error flow of definer layout
net/mlx5: HWS, removed wrong access to a number of rules variable
mptcp: pm: fix UaF read in mptcp_pm_nl_rm_addr_or_subflow
net: ethernet: mtk_eth_soc: fix memory corruption during fq dma init
vmxnet3: Fix packet corruption in vmxnet3_xdp_xmit_frame
net: dsa: vsc73xx: fix reception from VLAN-unaware bridges
net: ravb: Only advertise Rx/Tx timestamps if hardware supports it
net: microchip: vcap api: Fix memory leaks in vcap_api_encode_rule_test()
net: phy: mdio-bcm-unimac: Add BCM6846 support
dt-bindings: net: brcm,unimac-mdio: Add bcm6846-mdio
udp: Compute L4 checksum as usual when not segmenting the skb
genetlink: hold RCU in genlmsg_mcast()
net: dsa: mv88e6xxx: Fix the max_vid definition for the MV88E6361
tcp/dccp: Don't use timer_pending() in reqsk_queue_unlink().
...
The Realtek RTL8125/RTL8126 NBase-T MAC/PHY chips have internal PHY's
which are register-compatible, at least for the registers we use here.
So let's use just one PHY driver to support all of them.
These internal PHY's exist also as external C45 PHY's, but on the
internal PHY's no access to MMD registers is possible. This can be
used to differentiate between the internal and external version.
As a side effect the drivers for two now external-only drivers don't
require read_mmd/write_mmd hooks any longer.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/c57081a6-811f-4571-ab35-34f4ca6de9af@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch adds support for hardware monitoring to the fbnic driver,
allowing for temperature and voltage sensor data to be exposed to
userspace via the HWMON interface. The driver registers a HWMON device
and provides callbacks for reading sensor data, enabling system
admins to monitor the health and operating conditions of fbnic.
Signed-off-by: Sanman Pradhan <sanmanpradhan@meta.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20241014152709.2123811-1-sanman.p211993@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tariq Toukan says:
====================
mlx5 misc fixes 2024-10-15
This patchset provides misc bug fixes from the team to the mlx5 core and
Eth drivers.
Series generated against:
commit 174714f0e5 ("selftests: drivers: net: fix name not defined")
====================
Link: https://patch.msgid.link/20241015093208.197603-1-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Command bitmask have a dedicated bit for MANAGE_PAGES command, this bit
isn't Initialize during command bitmask Initialization, only during
MANAGE_PAGES.
In addition, mlx5_cmd_trigger_completions() is trying to trigger
completion for MANAGE_PAGES command as well.
Hence, in case health error occurred before any MANAGE_PAGES command
have been invoke (for example, during mlx5_enable_hca()),
mlx5_cmd_trigger_completions() will try to trigger completion for
MANAGE_PAGES command, which will result in null-ptr-deref error.[1]
Fix it by Initialize command bitmask correctly.
While at it, re-write the code for better understanding.
[1]
BUG: KASAN: null-ptr-deref in mlx5_cmd_trigger_completions+0x1db/0x600 [mlx5_core]
Write of size 4 at addr 0000000000000214 by task kworker/u96:2/12078
CPU: 10 PID: 12078 Comm: kworker/u96:2 Not tainted 6.9.0-rc2_for_upstream_debug_2024_04_07_19_01 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Workqueue: mlx5_health0000:08:00.0 mlx5_fw_fatal_reporter_err_work [mlx5_core]
Call Trace:
<TASK>
dump_stack_lvl+0x7e/0xc0
kasan_report+0xb9/0xf0
kasan_check_range+0xec/0x190
mlx5_cmd_trigger_completions+0x1db/0x600 [mlx5_core]
mlx5_cmd_flush+0x94/0x240 [mlx5_core]
enter_error_state+0x6c/0xd0 [mlx5_core]
mlx5_fw_fatal_reporter_err_work+0xf3/0x480 [mlx5_core]
process_one_work+0x787/0x1490
? lockdep_hardirqs_on_prepare+0x400/0x400
? pwq_dec_nr_in_flight+0xda0/0xda0
? assign_work+0x168/0x240
worker_thread+0x586/0xd30
? rescuer_thread+0xae0/0xae0
kthread+0x2df/0x3b0
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x2d/0x70
? kthread_complete_and_exit+0x20/0x20
ret_from_fork_asm+0x11/0x20
</TASK>
Fixes: 9b98d395b8 ("net/mlx5: Start health poll at earlier stage of driver load")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, mlx5 driver does not enforce vector index to be lower than
the maximum number of supported completion vectors when requesting a
new completion EQ. Thus, mlx5_comp_eqn_get() fails when trying to
acquire an IRQ with an improper vector index.
To prevent the case above, enforce that vector index value is
valid and lower than maximum in mlx5_comp_eqn_get() before handling the
request.
Fixes: f14c1a14e6 ("net/mlx5: Allocate completion EQs dynamically")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The HWS BWC API uses one lock per queue and usually acquires one of
them, except when doing changes which require locking all queues in
order. Naturally, lockdep isn't too happy about acquiring the same lock
class multiple times, so inform it that each queue lock is a different
class to avoid false positives.
Fixes: 2ca62599aa ("net/mlx5: HWS, added send engine and context handling")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
hws_send_queues_bwc_locks_destroy destroyed more queue locks than
allocated, leading to memory corruption (occasionally) and warnings such
as DEBUG_LOCKS_WARN_ON(mutex_is_locked(lock)) in __mutex_destroy because
sometimes, the 'mutex' being destroyed was random memory.
The severity of this problem is proportional to the number of queues
configured because the code overreaches beyond the end of the
bwc_send_queue_locks array by 2x its length.
Fix that by using the correct number of bwc queues.
Fixes: 2ca62599aa ("net/mlx5: HWS, added send engine and context handling")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Fix error flow bug that could lead to double free of a buffer
during a failure to calculate a suitable definer layout.
Fixes: 74a778b4a6 ("net/mlx5: HWS, added definers handling")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Itamar Gozlan <igozlan@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Removed wrong access to the num_of_rules field of the matcher.
This is a usual u32 variable, but the access was as if it was atomic.
This fixes the following CI warnings:
mlx5hws_bwc.c:708:17: warning: large atomic operation may incur significant performance penalty;
the access size (4 bytes) exceeds the max lock-free size (0 bytes) [-Watomic-alignment]
Fixes: 510f9f61a1 ("net/mlx5: HWS, added API and enabled HWS support")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202409291101.6NdtMFVC-lkp@intel.com/
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Itamar Gozlan <igozlan@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
