[ Upstream commit cc0cf10fda ]
Fix the check if netfilter's static keys are available. netfilter defines
and exports static keys if CONFIG_JUMP_LABEL is enabled. (HAVE_JUMP_LABEL
is never defined.)
Fixes: 971502d77f ("bridge: netfilter: unroll NF_HOOK helper in bridge input path")
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Reviewed-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260127101925.1754425-1-martin@kaiser.cx
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 476681f10c ]
The driver's ndo_get_stats64 callback is only reporting mlx5 counters,
without accounting for the netdev stats, causing errors from the network
stack to be invisible in statistics.
Add netdev_stats_to_stats64() call to first populate the counters, then
add mlx5 counters on top, ensuring both are accounted for (where
appropriate).
Fixes: f62b8bb8f2 ("net/mlx5: Extend mlx5_core to support ConnectX-4 Ethernet functionality")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1769411695-18820-4-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 05faf2c0a7 ]
Since the beginning, the Intel ice driver has counted receive checksum
offload mismatches into the rx_errors member of the rtnl_link_stats64
struct. In ethtool -S these show up as rx_csum_bad.nic.
I believe counting these in rx_errors is fundamentally wrong, as it's
pretty clear from the comments in if_link.h and from every other statistic
the driver is summing into rx_errors, that all of them would cause a
"hardware drop" except for the UDP checksum mismatch, as well as the fact
that all the other causes for rx_errors are L2 reasons, and this L4 UDP
"mismatch" is an outlier.
A last nail in the coffin is that rx_errors is monitored in production and
can indicate a bad NIC/cable/Switch port, but instead some random series of
UDP packets with bad checksums will now trigger this alert. This false
positive makes the alert useless and affects us as well as other companies.
This packet with presumably a bad UDP checksum is *already* passed to the
stack, just not marked as offloaded by the hardware/driver. If it is
dropped by the stack it will show up as UDP_MIB_CSUMERRORS.
And one more thing, none of the other Intel drivers, and at least bnxt_en
and mlx5 both don't appear to count UDP offload mismatches as rx_errors.
Here is a related customer complaint:
https://community.intel.com/t5/Ethernet-Products/ice-rx-errros-is-too-sensitive-to-IP-TCP-attack-packets-Intel/td-p/1662125
Fixes: 4f1fe43c92 ("ice: Add more Rx errors to netdev's rx_error counter")
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Cc: Jake Keller <jacob.e.keller@intel.com>
Cc: IWL <intel-wired-lan@lists.osuosl.org>
Signed-off-by: Jesse Brandeburg <jbrandeburg@cloudflare.com>
Acked-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 100cf7b4ca ]
hw->aci.lock is already initialized in ixgbe_sw_init(), so
ixgbe_recovery_probe() doesn't need to initialize the lock. This
function is also not responsible for destroying the lock on failures.
Additionally, change the name of label in accordance with this change.
Fixes: 29cb3b8d95 ("ixgbe: add E610 implementation of FW recovery mode")
Reported-by: Simon Horman <horms@kernel.org>
Closes: https://lore.kernel.org/intel-wired-lan/aTcFhoH-z2btEKT-@horms.kernel.org/
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 638344712a ]
When ixgbe_recovery_probe() is invoked and this function fails,
allocated resources in advance are not completely freed, because
ixgbe_probe() returns ixgbe_recovery_probe() directly and
ixgbe_recovery_probe() only frees partial resources, resulting in memory
leaks including:
- adapter->io_addr
- adapter->jump_tables[0]
- adapter->mac_table
- adapter->rss_key
- adapter->af_xdp_zc_qps
The leaked MMIO region can be observed in /proc/vmallocinfo, and the
remaining leaks are reported by kmemleak.
Don't return ixgbe_recovery_probe() directly, and instead let
ixgbe_probe() to clean up resources on failures.
Fixes: 29cb3b8d95 ("ixgbe: add E610 implementation of FW recovery mode")
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e9acda52fd ]
Fix a use-after-free which happens due to enslave failure after the new
slave has been added to the array. Since the new slave can be used for Tx
immediately, we can use it after it has been freed by the enslave error
cleanup path which frees the allocated slave memory. Slave update array is
supposed to be called last when further enslave failures are not expected.
Move it after xdp setup to avoid any problems.
It is very easy to reproduce the problem with a simple xdp_pass prog:
ip l add bond1 type bond mode balance-xor
ip l set bond1 up
ip l set dev bond1 xdp object xdp_pass.o sec xdp_pass
ip l add dumdum type dummy
Then run in parallel:
while :; do ip l set dumdum master bond1 1>/dev/null 2>&1; done;
mausezahn bond1 -a own -b rand -A rand -B 1.1.1.1 -c 0 -t tcp "dp=1-1023, flags=syn"
The crash happens almost immediately:
[ 605.602850] Oops: general protection fault, probably for non-canonical address 0xe0e6fc2460000137: 0000 [#1] SMP KASAN NOPTI
[ 605.602916] KASAN: maybe wild-memory-access in range [0x07380123000009b8-0x07380123000009bf]
[ 605.602946] CPU: 0 UID: 0 PID: 2445 Comm: mausezahn Kdump: loaded Tainted: G B 6.19.0-rc6+ #21 PREEMPT(voluntary)
[ 605.602979] Tainted: [B]=BAD_PAGE
[ 605.602998] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 605.603032] RIP: 0010:netdev_core_pick_tx+0xcd/0x210
[ 605.603063] Code: 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 3e 01 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b 6b 08 49 8d 7d 30 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 25 01 00 00 49 8b 45 30 4c 89 e2 48 89 ee 48 89
[ 605.603111] RSP: 0018:ffff88817b9af348 EFLAGS: 00010213
[ 605.603145] RAX: dffffc0000000000 RBX: ffff88817d28b420 RCX: 0000000000000000
[ 605.603172] RDX: 00e7002460000137 RSI: 0000000000000008 RDI: 07380123000009be
[ 605.603199] RBP: ffff88817b541a00 R08: 0000000000000001 R09: fffffbfff3ed8c0c
[ 605.603226] R10: ffffffff9f6c6067 R11: 0000000000000001 R12: 0000000000000000
[ 605.603253] R13: 073801230000098e R14: ffff88817d28b448 R15: ffff88817b541a84
[ 605.603286] FS: 00007f6570ef67c0(0000) GS:ffff888221dfa000(0000) knlGS:0000000000000000
[ 605.603319] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 605.603343] CR2: 00007f65712fae40 CR3: 000000011371b000 CR4: 0000000000350ef0
[ 605.603373] Call Trace:
[ 605.603392] <TASK>
[ 605.603410] __dev_queue_xmit+0x448/0x32a0
[ 605.603434] ? __pfx_vprintk_emit+0x10/0x10
[ 605.603461] ? __pfx_vprintk_emit+0x10/0x10
[ 605.603484] ? __pfx___dev_queue_xmit+0x10/0x10
[ 605.603507] ? bond_start_xmit+0xbfb/0xc20 [bonding]
[ 605.603546] ? _printk+0xcb/0x100
[ 605.603566] ? __pfx__printk+0x10/0x10
[ 605.603589] ? bond_start_xmit+0xbfb/0xc20 [bonding]
[ 605.603627] ? add_taint+0x5e/0x70
[ 605.603648] ? add_taint+0x2a/0x70
[ 605.603670] ? end_report.cold+0x51/0x75
[ 605.603693] ? bond_start_xmit+0xbfb/0xc20 [bonding]
[ 605.603731] bond_start_xmit+0x623/0xc20 [bonding]
Fixes: 9e2ee5c7e7 ("net, bonding: Add XDP support to the bonding driver")
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Reported-by: Chen Zhen <chenzhen126@huawei.com>
Closes: https://lore.kernel.org/netdev/fae17c21-4940-5605-85b2-1d5e17342358@huawei.com/
CC: Jussi Maki <joamaki@gmail.com>
CC: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://patch.msgid.link/20260123120659.571187-1-razor@blackwall.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c84959167 ]
Some PHYs stop the refclk for power saving, usually while link down.
This causes reading stats to time out.
Therefore, in emac_stats_update(), also don't update and reschedule if
!netif_carrier_ok(). But that means we could be missing later updates if
the link comes back up, so also reschedule when link up is detected in
emac_adjust_link().
While we're at it, improve the comments and error message prints around
this to reflect the better understanding of how this could happen.
Hopefully if this happens again on new hardware, these comments will
direct towards a solution.
Closes: https://lore.kernel.org/r/20260119141620.1318102-1-amadeus@jmu.edu.cn/
Fixes: bfec6d7f20 ("net: spacemit: Add K1 Ethernet MAC")
Co-developed-by: Chukun Pan <amadeus@jmu.edu.cn>
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Signed-off-by: Vivian Wang <wangruikang@iscas.ac.cn>
Link: https://patch.msgid.link/20260123-k1-ethernet-clarify-stat-timeout-v3-1-93b9df627e87@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8d7ba71e46 ]
In rocker_world_port_pre_init(), rocker_port->wpriv is allocated with
kzalloc(wops->port_priv_size, GFP_KERNEL). However, in
rocker_world_port_post_fini(), the memory is only freed when
wops->port_post_fini callback is set:
if (!wops->port_post_fini)
return;
wops->port_post_fini(rocker_port);
kfree(rocker_port->wpriv);
Since rocker_ofdpa_ops does not implement port_post_fini callback
(it is NULL), the wpriv memory allocated for each port is never freed
when ports are removed. This leads to a memory leak of
sizeof(struct ofdpa_port) bytes per port on every device removal.
Fix this by always calling kfree(rocker_port->wpriv) regardless of
whether the port_post_fini callback exists.
Fixes: e420114eef ("rocker: introduce worlds infrastructure")
Signed-off-by: Kery Qi <qikeyu2017@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260123211030.2109-2-qikeyu2017@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca12c4a155 ]
The function mlx5_esw_vport_vhca_id() is declared to return bool,
but returns -EOPNOTSUPP (-45), which is an int error code. This
causes a signedness bug as reported by smatch.
This patch fixes this smatch report:
drivers/net/ethernet/mellanox/mlx5/core/eswitch.h:981 mlx5_esw_vport_vhca_id()
warn: signedness bug returning '(-45)'
Fixes: 1baf304265 ("net/mlx5: E-Switch, Set/Query hca cap via vhca id")
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Zeng Chi <zengchi@kylinos.cn>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260123085749.1401969-1-zeng_chi911@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f0813bcd2d ]
When receiving data in the DPMAIF RX path,
the t7xx_dpmaif_set_frag_to_skb() function adds
page fragments to an skb without checking if the number of
fragments has exceeded MAX_SKB_FRAGS. This could lead to a buffer overflow
in skb_shinfo(skb)->frags[] array, corrupting adjacent memory and
potentially causing kernel crashes or other undefined behavior.
This issue was identified through static code analysis by comparing with a
similar vulnerability fixed in the mt76 driver commit b102f0c522 ("mt76:
fix array overflow on receiving too many fragments for a packet").
The vulnerability could be triggered if the modem firmware sends packets
with excessive fragments. While under normal protocol conditions (MTU 3080
bytes, BAT buffer 3584 bytes),
a single packet should not require additional
fragments, the kernel should not blindly trust firmware behavior.
Malicious, buggy, or compromised firmware could potentially craft packets
with more fragments than the kernel expects.
Fix this by adding a bounds check before calling skb_add_rx_frag() to
ensure nr_frags does not exceed MAX_SKB_FRAGS.
The check must be performed before unmapping to avoid a page leak
and double DMA unmap during device teardown.
Fixes: d642b012df ("net: wwan: t7xx: Add data path interface")
Signed-off-by: Kery Qi <qikeyu2017@gmail.com>
Link: https://patch.msgid.link/20260122170401.1986-2-qikeyu2017@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03cbcdf938 ]
When replying to a ICMPv6 echo request that comes from localhost address
the right output ifindex is 1 (lo) and not rt6i_idev dev index. Use the
skb device ifindex instead. This fixes pinging to a local address from
localhost source address.
$ ping6 -I ::1 2001:1:1::2 -c 3
PING 2001:1:1::2 (2001:1:1::2) from ::1 : 56 data bytes
64 bytes from 2001:1:1::2: icmp_seq=1 ttl=64 time=0.037 ms
64 bytes from 2001:1:1::2: icmp_seq=2 ttl=64 time=0.069 ms
64 bytes from 2001:1:1::2: icmp_seq=3 ttl=64 time=0.122 ms
2001:1:1::2 ping statistics
3 packets transmitted, 3 received, 0% packet loss, time 2032ms
rtt min/avg/max/mdev = 0.037/0.076/0.122/0.035 ms
Fixes: 1b70d792cf ("ipv6: Use rt6i_idev index for echo replies to a local address")
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260121194409.6749-1-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 09f979d1f3 ]
In mvpp2_ethtool_cls_rule_ins(), the ethtool_rule is allocated by
ethtool_rx_flow_rule_create(). If the subsequent conversion to flow
type fails, the function jumps to the clean_rule label.
However, the clean_rule label only frees efs, skipping the cleanup
of ethtool_rule, which leads to a memory leak.
Fix this by jumping to the clean_eth_rule label, which properly calls
ethtool_rx_flow_rule_destroy() before freeing efs.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: f4f1ba1819 ("net: mvpp2: cls: Report an error for unsupported flow types")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260123065716.2248324-1-zilin@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 944c614b0a ]
Since cited commit, core locks the net_device's rss_lock when handling
ethtool -x command, so driver's implementation should not lock it
again. Remove the latter.
Fixes: 040cef30b5 ("net: ethtool: move get_rxfh callback under the rss_lock")
Reported-by: Damir Mansurov <damir.mansurov@oktetlabs.ru>
Closes: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1126015
Suggested-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/20260123161634.1215006-1-edward.cree@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8016dc5ee1 ]
In octep_device_setup(), if octep_ctrl_net_init() fails, the function
returns directly without unmapping the mapped resources and freeing the
allocated configuration memory.
Fix this by jumping to the unsupported_dev label, which performs the
necessary cleanup. This aligns with the error handling logic of other
paths in this function.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: 577f0d1b1c ("octeon_ep: add separate mailbox command and response queues")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260121130551.3717090-1-zilin@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6de4436bf3 ]
We are not deregistering the fixed phy link when hitting the early
exit condition. Add the correct early exit sequence.
Fixes: 490cb41200 ("net: bcmasp: Add support for ASP2.0 Ethernet controller")
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20260122194001.1098859-1-justin.chen@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 494fc029f6 ]
Sinc commit 79a6d1bfe1 ("can: gs_usb: gs_usb_receive_bulk_callback():
unanchor URL on usb_submit_urb() error") a failing resubmit URB will print
an info message.
In the case of a short read where netdev has not yet been assigned,
initialize as NULL to avoid dereferencing an undefined value. Also report
the error value of the failed resubmit.
Fixes: 79a6d1bfe1 ("can: gs_usb: gs_usb_receive_bulk_callback(): unanchor URL on usb_submit_urb() error")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/all/20260119181904.1209979-1-kuba@kernel.org/
Link: https://patch.msgid.link/20260120-gs_usb-fix-error-message-v1-1-6be04de572bc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 108948f723 ]
In esw_acl_ingress_lgcy_setup(), if esw_acl_table_create() fails,
the function returns directly without releasing the previously
created counter, leading to a memory leak.
Fix this by jumping to the out label instead of returning directly,
which aligns with the error handling logic of other paths in this
function.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: 07bab95026 ("net/mlx5: E-Switch, Refactor eswitch ingress acl codes")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260120134640.2717808-1-zilin@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1b9c17fd0a ]
Fix memory leak in set_ssp_complete() where mgmt_pending_cmd structures
are not freed after being removed from the pending list.
Commit 302a1f674c ("Bluetooth: MGMT: Fix possible UAFs") replaced
mgmt_pending_foreach() calls with individual command handling but missed
adding mgmt_pending_free() calls in both error and success paths of
set_ssp_complete(). Other completion functions like set_le_complete()
were fixed correctly in the same commit.
This causes a memory leak of the mgmt_pending_cmd structure and its
associated parameter data for each SSP command that completes.
Add the missing mgmt_pending_free(cmd) calls in both code paths to fix
the memory leak. Also fix the same issue in set_advertising_complete().
Fixes: 302a1f674c ("Bluetooth: MGMT: Fix possible UAFs")
Signed-off-by: Jianpeng Chang <jianpeng.chang.cn@windriver.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c3cd7a0b8 ]
hci_uart_set_proto() sets HCI_UART_PROTO_INIT before calling
hci_uart_register_dev(), which calls proto->open() to initialize
hu->priv. However, if a TTY write wakeup occurs during this window,
hci_uart_tx_wakeup() may schedule write_work before hu->priv is
initialized, leading to a NULL pointer dereference in
hci_uart_write_work() when proto->dequeue() accesses hu->priv.
The race condition is:
CPU0 CPU1
---- ----
hci_uart_set_proto()
set_bit(HCI_UART_PROTO_INIT)
hci_uart_register_dev()
tty write wakeup
hci_uart_tty_wakeup()
hci_uart_tx_wakeup()
schedule_work(&hu->write_work)
proto->open(hu)
// initializes hu->priv
hci_uart_write_work()
hci_uart_dequeue()
proto->dequeue(hu)
// accesses hu->priv (NULL!)
Fix this by moving set_bit(HCI_UART_PROTO_INIT) after proto->open()
succeeds, ensuring hu->priv is initialized before any work can be
scheduled.
Fixes: 5df5dafc17 ("Bluetooth: hci_uart: Fix another race during initialization")
Link: https://lore.kernel.org/linux-bluetooth/6969764f.170a0220.2b9fc4.35a7@mx.google.com/
Signed-off-by: Jia-Hong Su <s11242586@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0baa4d3170 ]
In at91_can_probe(), the dev structure is allocated via alloc_candev().
However, if the subsequent call to devm_phy_optional_get() fails, the
code jumps directly to exit_iounmap, missing the call to free_candev().
This results in a memory leak of the allocated net_device structure.
Fix this by jumping to the exit_free label instead, which ensures that
free_candev() is called to properly release the memory.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: 3ecc09856a ("can: at91_can: add CAN transceiver support")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Link: https://patch.msgid.link/20260122114128.643752-1-zilin@seu.edu.cn
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d0f1314e8 ]
[BUG]
After commit aa60fe12b4 ("btrfs: zlib: refactor S390x HW acceleration
buffer preparation"), we no longer release the folio of the page cache
of folio returned by btrfs_compress_filemap_get_folio() for S390
hardware acceleration path.
[CAUSE]
Before that commit, we call kumap_local() and folio_put() after handling
each folio.
Although the timing is not ideal (it release previous folio at the
beginning of the loop, and rely on some extra cleanup out of the loop),
it at least handles the folio release correctly.
Meanwhile the refactored code is easier to read, it lacks the call to
release the filemap folio.
[FIX]
Add the missing folio_put() for copy_data_into_buffer().
CC: linux-s390@vger.kernel.org # 6.18+
Fixes: aa60fe12b4 ("btrfs: zlib: refactor S390x HW acceleration buffer preparation")
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c644bce62b ]
Commit c31f91c6af ("fuse: don't allow signals to interrupt getdents
copying") introduced the use of high bits in d_type as flags. However,
overlayfs was not adapted to handle this change.
In ovl_cache_entry_new(), the code checks if d_type == DT_CHR to
determine if an entry might be a whiteout. When fuse is used as the
lower layer and sets high bits in d_type, this comparison fails,
causing whiteout files to not be recognized properly and resulting in
incorrect overlayfs behavior.
Fix this by requiring callers of iterate_dir() to opt-in for getting
flag bits in d_type outside of S_DT_MASK.
Fixes: c31f91c6af ("fuse: don't allow signals to interrupt getdents copying")
Link: https://lore.kernel.org/all/20260107034551.439-1-luochunsheng@ustc.edu/
Link: https://github.com/containerd/stargz-snapshotter/issues/2214
Reported-by: Chunsheng Luo <luochunsheng@ustc.edu>
Reviewed-by: Chunsheng Luo <luochunsheng@ustc.edu>
Tested-by: Chunsheng Luo <luochunsheng@ustc.edu>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://patch.msgid.link/20260108074522.3400998-1-amir73il@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3b617fd3d3 ]
The is_mergeable_anon_vma() function uses vmg->middle as the source VMA.
However when merging a new VMA, this field is NULL.
In all cases except mremap(), the new VMA will either be newly established
and thus lack an anon_vma, or will be an expansion of an existing VMA thus
we do not care about whether VMA is CoW'd or not.
In the case of an mremap(), we can end up in a situation where we can
accidentally allow an unfaulted/faulted merge with a VMA that has been
forked, violating the general rule that we do not permit this for reasons
of anon_vma lock scalability.
Now we have the ability to be aware of the fact we are copying a VMA and
also know which VMA that is, we can explicitly check for this, so do so.
This is pertinent since commit 879bca0a2c ("mm/vma: fix incorrectly
disallowed anonymous VMA merges"), as this patch permits unfaulted/faulted
merges that were previously disallowed running afoul of this issue.
While we are here, vma_had_uncowed_parents() is a confusing name, so make
it simple and rename it to vma_is_fork_child().
Link: https://lkml.kernel.org/r/6e2b9b3024ae1220961c8b81d74296d4720eaf2b.1767638272.git.lorenzo.stoakes@oracle.com
Fixes: 879bca0a2c ("mm/vma: fix incorrectly disallowed anonymous VMA merges")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Reviewed-by: Jeongjun Park <aha310510@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand (Red Hat) <david@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Pedro Falcato <pfalcato@suse.de>
Cc: Rik van Riel <riel@surriel.com>
Cc: Yeoreum Yun <yeoreum.yun@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ with upstream commit 61f67c230a backported, this simply applied correctly. Built + tested ]
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ upstream commit 61f67c230a ]
Patch series "mm/vma: fix anon_vma UAF on mremap() faulted, unfaulted
merge", v2.
Commit 879bca0a2c ("mm/vma: fix incorrectly disallowed anonymous VMA
merges") introduced the ability to merge previously unavailable VMA merge
scenarios.
However, it is handling merges incorrectly when it comes to mremap() of a
faulted VMA adjacent to an unfaulted VMA. The issues arise in three
cases:
1. Previous VMA unfaulted:
copied -----|
v
|-----------|.............|
| unfaulted |(faulted VMA)|
|-----------|.............|
prev
2. Next VMA unfaulted:
copied -----|
v
|.............|-----------|
|(faulted VMA)| unfaulted |
|.............|-----------|
next
3. Both adjacent VMAs unfaulted:
copied -----|
v
|-----------|.............|-----------|
| unfaulted |(faulted VMA)| unfaulted |
|-----------|.............|-----------|
prev next
This series fixes each of these cases, and introduces self tests to assert
that the issues are corrected.
I also test a further case which was already handled, to assert that my
changes continues to correctly handle it:
4. prev unfaulted, next faulted:
copied -----|
v
|-----------|.............|-----------|
| unfaulted |(faulted VMA)| faulted |
|-----------|.............|-----------|
prev next
This bug was discovered via a syzbot report, linked to in the first patch
in the series, I confirmed that this series fixes the bug.
I also discovered that we are failing to check that the faulted VMA was
not forked when merging a copied VMA in cases 1-3 above, an issue this
series also addresses.
I also added self tests to assert that this is resolved (and confirmed
that the tests failed prior to this).
I also cleaned up vma_expand() as part of this work, renamed
vma_had_uncowed_parents() to vma_is_fork_child() as the previous name was
unduly confusing, and simplified the comments around this function.
This patch (of 4):
Commit 879bca0a2c ("mm/vma: fix incorrectly disallowed anonymous VMA
merges") introduced the ability to merge previously unavailable VMA merge
scenarios.
The key piece of logic introduced was the ability to merge a faulted VMA
immediately next to an unfaulted VMA, which relies upon dup_anon_vma() to
correctly handle anon_vma state.
In the case of the merge of an existing VMA (that is changing properties
of a VMA and then merging if those properties are shared by adjacent
VMAs), dup_anon_vma() is invoked correctly.
However in the case of the merge of a new VMA, a corner case peculiar to
mremap() was missed.
The issue is that vma_expand() only performs dup_anon_vma() if the target
(the VMA that will ultimately become the merged VMA): is not the next VMA,
i.e. the one that appears after the range in which the new VMA is to be
established.
A key insight here is that in all other cases other than mremap(), a new
VMA merge either expands an existing VMA, meaning that the target VMA will
be that VMA, or would have anon_vma be NULL.
Specifically:
* __mmap_region() - no anon_vma in place, initial mapping.
* do_brk_flags() - expanding an existing VMA.
* vma_merge_extend() - expanding an existing VMA.
* relocate_vma_down() - no anon_vma in place, initial mapping.
In addition, we are in the unique situation of needing to duplicate
anon_vma state from a VMA that is neither the previous or next VMA being
merged with.
dup_anon_vma() deals exclusively with the target=unfaulted, src=faulted
case. This leaves four possibilities, in each case where the copied VMA
is faulted:
1. Previous VMA unfaulted:
copied -----|
v
|-----------|.............|
| unfaulted |(faulted VMA)|
|-----------|.............|
prev
target = prev, expand prev to cover.
2. Next VMA unfaulted:
copied -----|
v
|.............|-----------|
|(faulted VMA)| unfaulted |
|.............|-----------|
next
target = next, expand next to cover.
3. Both adjacent VMAs unfaulted:
copied -----|
v
|-----------|.............|-----------|
| unfaulted |(faulted VMA)| unfaulted |
|-----------|.............|-----------|
prev next
target = prev, expand prev to cover.
4. prev unfaulted, next faulted:
copied -----|
v
|-----------|.............|-----------|
| unfaulted |(faulted VMA)| faulted |
|-----------|.............|-----------|
prev next
target = prev, expand prev to cover. Essentially equivalent to 3, but
with additional requirement that next's anon_vma is the same as the copied
VMA's. This is covered by the existing logic.
To account for this very explicitly, we introduce
vma_merge_copied_range(), which sets a newly introduced vmg->copied_from
field, then invokes vma_merge_new_range() which handles the rest of the
logic.
We then update the key vma_expand() function to clean up the logic and
make what's going on clearer, making the 'remove next' case less special,
before invoking dup_anon_vma() unconditionally should we be copying from a
VMA.
Note that in case 3, the if (remove_next) ... branch will be a no-op, as
next=src in this instance and src is unfaulted.
In case 4, it won't be, but since in this instance next=src and it is
faulted, this will have required tgt=faulted, src=faulted to be
compatible, meaning that next->anon_vma == vmg->copied_from->anon_vma, and
thus a single dup_anon_vma() of next suffices to copy anon_vma state for
the copied-from VMA also.
If we are copying from a VMA in a successful merge we must _always_
propagate anon_vma state.
This issue can be observed most directly by invoked mremap() to move
around a VMA and cause this kind of merge with the MREMAP_DONTUNMAP flag
specified.
This will result in unlink_anon_vmas() being called after failing to
duplicate anon_vma state to the target VMA, which results in the anon_vma
itself being freed with folios still possessing dangling pointers to the
anon_vma and thus a use-after-free bug.
This bug was discovered via a syzbot report, which this patch resolves.
We further make a change to update the mergeable anon_vma check to assert
the copied-from anon_vma did not have CoW parents, as otherwise
dup_anon_vma() might incorrectly propagate CoW ancestors from the next VMA
in case 4 despite the anon_vma's being identical for both VMAs.
Link: https://lkml.kernel.org/r/cover.1767638272.git.lorenzo.stoakes@oracle.com
Link: https://lkml.kernel.org/r/b7930ad2b1503a657e29fe928eb33061d7eadf5b.1767638272.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Fixes: 879bca0a2c ("mm/vma: fix incorrectly disallowed anonymous VMA merges")
Reported-by: syzbot+b165fc2e11771c66d8ba@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/694a2745.050a0220.19928e.0017.GAE@google.com/
Reported-by: syzbot+5272541ccbbb14e2ec30@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/694e3dc6.050a0220.35954c.0066.GAE@google.com/
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Reviewed-by: Jeongjun Park <aha310510@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand (Red Hat) <david@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Yeoreum Yun <yeoreum.yun@arm.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Pedro Falcato <pfalcato@suse.de>
Cc: Rik van Riel <riel@surriel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ updated to account for lack of sticky VMA flags + built, tested confirmed working ]
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit cd4a3ced4d ]
A glitch in the edge detection circuit can cause a spurious interrupt. The
hardware manual recommends clearing the status flag after setting the
ICU_TSSRk register as a countermeasure.
Currently, a spurious interrupt is generated on the resume path of s2idle
for the PMIC RTC TINT interrupt due to a glitch related to unnecessary
enabling/disabling of the TINT enable bit.
Fix this issue by not setting TSSR(TINT Source) and TITSR(TINT Detection
Method Selection) registers if the values are the same as those set
in these registers.
Fixes: 0d7605e75a ("irqchip: Add RZ/V2H(P) Interrupt Control Unit (ICU) driver")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260113125315.359967-2-biju.das.jz@bp.renesas.com
[tm: Added field_get() to avoid build error]
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8bb3754909 ]
The current UFS clocks does not align with their respective names,
causing the ref_clk to be set to an incorrect frequency as below,
which results in command timeouts.
ufshcd-qcom 1d84000.ufshc: invalid ref_clk setting = 300000000
This commit fixes the issue by properly reordering the UFS clocks to
match their names.
Fixes: ea172f61f4 ("arm64: dts: qcom: qcs615: Fix up UFS clocks")
Cc: stable@vger.kernel.org
Signed-off-by: Pradeep P V K <pradeep.pragallapati@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251126131146.16146-1-pradeep.pragallapati@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9910159f06 ]
When one iio device is a consumer of another, it is possible that
the ->info_exist_lock of both ends up being taken when reading the
value of the consumer device.
Since they currently belong to the same lockdep class (being
initialized in a single location with mutex_init()), that results in a
lockdep warning
CPU0
----
lock(&iio_dev_opaque->info_exist_lock);
lock(&iio_dev_opaque->info_exist_lock);
*** DEADLOCK ***
May be due to missing lock nesting notation
4 locks held by sensors/414:
#0: c31fd6dc (&p->lock){+.+.}-{3:3}, at: seq_read_iter+0x44/0x4e4
#1: c4f5a1c4 (&of->mutex){+.+.}-{3:3}, at: kernfs_seq_start+0x1c/0xac
#2: c2827548 (kn->active#34){.+.+}-{0:0}, at: kernfs_seq_start+0x30/0xac
#3: c1dd2b68 (&iio_dev_opaque->info_exist_lock){+.+.}-{3:3}, at: iio_read_channel_processed_scale+0x24/0xd8
stack backtrace:
CPU: 0 UID: 0 PID: 414 Comm: sensors Not tainted 6.17.11 #5 NONE
Hardware name: Generic AM33XX (Flattened Device Tree)
Call trace:
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x44/0x60
dump_stack_lvl from print_deadlock_bug+0x2b8/0x334
print_deadlock_bug from __lock_acquire+0x13a4/0x2ab0
__lock_acquire from lock_acquire+0xd0/0x2c0
lock_acquire from __mutex_lock+0xa0/0xe8c
__mutex_lock from mutex_lock_nested+0x1c/0x24
mutex_lock_nested from iio_read_channel_raw+0x20/0x6c
iio_read_channel_raw from rescale_read_raw+0x128/0x1c4
rescale_read_raw from iio_channel_read+0xe4/0xf4
iio_channel_read from iio_read_channel_processed_scale+0x6c/0xd8
iio_read_channel_processed_scale from iio_hwmon_read_val+0x68/0xbc
iio_hwmon_read_val from dev_attr_show+0x18/0x48
dev_attr_show from sysfs_kf_seq_show+0x80/0x110
sysfs_kf_seq_show from seq_read_iter+0xdc/0x4e4
seq_read_iter from vfs_read+0x238/0x2e4
vfs_read from ksys_read+0x6c/0xec
ksys_read from ret_fast_syscall+0x0/0x1c
Just as the mlock_key already has its own lockdep class, add a
lock_class_key for the info_exist mutex.
Note that this has in theory been a problem since before IIO first
left staging, but it only occurs when a chain of consumers is in use
and that is not often done.
Fixes: ac917a8111 ("staging:iio:core set the iio_dev.info pointer to null on unregister under lock.")
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Peter Rosin <peda@axentia.se>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3937027cae ]
Ever since we stopped using the page count to detect shared PMD page
tables, these comments are outdated.
The only reason we have to flush the TLB early is because once we drop the
i_mmap_rwsem, the previously shared page table could get freed (to then
get reallocated and used for other purpose). So we really have to flush
the TLB before that could happen.
So let's simplify the comments a bit.
The "If we unshared PMDs, the TLB flush was not recorded in mmu_gather."
part introduced as in commit a4a118f2ee ("hugetlbfs: flush TLBs
correctly after huge_pmd_unshare") was confusing: sure it is recorded in
the mmu_gather, otherwise tlb_flush_mmu_tlbonly() wouldn't do anything.
So let's drop that comment while at it as well.
We'll centralize these comments in a single helper as we rework the code
next.
Link: https://lkml.kernel.org/r/20251223214037.580860-3-david@kernel.org
Fixes: 59d9094df3 ("mm: hugetlb: independent PMD page table shared count")
Signed-off-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reviewed-by: Rik van Riel <riel@surriel.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Cc: Liu Shixin <liushixin2@huawei.com>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: "Uschakow, Stanislav" <suschako@amazon.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1fb0d830da upstream.
During S4 (hibernate), the Bluetooth device loses power. Upon resume,
the driver performs the following actions:
1. Unregisters hdev
2. Calls function level reset
3. Registers hdev
Test case:
- run command sudo rtcwake -m disk -s 60
Signed-off-by: Ravindra <ravindra@intel.com>
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Cc: Mariappan Ramasamy <mail@nappairam.dev>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 70b3c28053 upstream.
On error handling paths, lineinfo_changed_notify() doesn't free the
allocated resources which results leaks. Fix it.
Cc: stable@vger.kernel.org
Fixes: d4cd0902c1 ("gpio: cdev: make sure the cdev fd is still active before emitting events")
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20260120030857.2144847-1-tzungbi@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6f287b1c8d upstream.
Workqueue xe-ggtt-wq has been allocated using WQ_MEM_RECLAIM, but
the flag has been passed as 3rd parameter (max_active) instead
of 2nd (flags) creating the workqueue as per-cpu with max_active = 8
(the WQ_MEM_RECLAIM value).
So change this by set WQ_MEM_RECLAIM as the 2nd parameter with a
default max_active.
Fixes: 60df57e496 ("drm/xe: Mark GGTT work queue with WQ_MEM_RECLAIM")
Cc: stable@vger.kernel.org
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260108180148.423062-1-marco.crivellari@suse.com
(cherry picked from commit aa39abc08e)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ca9e5115e8 upstream.
Page accounting can change via the shrinker without calling
xe_ttm_tt_unpopulate(), which normally updates page count tracepoints
through update_global_total_pages. Add a call to
update_global_total_pages when the shrinker successfully shrinks a BO.
v2:
- Don't adjust global accounting when pinning (Stuart)
Cc: stable@vger.kernel.org
Fixes: ce3d39fae3 ("drm/xe/bo: add GPU memory trace points")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://patch.msgid.link/20260107205732.2267541-1-matthew.brost@intel.com
(cherry picked from commit cc54eabdfb)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1a0f69e3c2 upstream.
Fix several issues in dw_dp_bind() error handling:
1. Missing return after drm_bridge_attach() failure - the function
continued execution instead of returning an error.
2. Resource leak: drm_dp_aux_register() is not a devm function, so
drm_dp_aux_unregister() must be called on all error paths after
aux registration succeeds. This affects errors from:
- drm_bridge_attach()
- phy_init()
- devm_add_action_or_reset()
- platform_get_irq()
- devm_request_threaded_irq()
3. Bug fix: platform_get_irq() returns the IRQ number or a negative
error code, but the error path was returning ERR_PTR(ret) instead
of ERR_PTR(dp->irq).
Use a goto label for cleanup to ensure consistent error handling.
Fixes: 86eecc3a9c ("drm/bridge: synopsys: Add DW DPTX Controller support library")
Cc: stable@vger.kernel.org
Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260102155553.13243-1-osama.abdelkader@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f7a980b3b8 upstream.
Fix similar memory leak as in commit 7352e1d593 ("can: gs_usb:
gs_usb_receive_bulk_callback(): fix URB memory leak").
In usb_8dev_open() -> usb_8dev_start(), the URBs for USB-in transfers are
allocated, added to the priv->rx_submitted anchor and submitted. In the
complete callback usb_8dev_read_bulk_callback(), the URBs are processed and
resubmitted. In usb_8dev_close() -> unlink_all_urbs() the URBs are freed by
calling usb_kill_anchored_urbs(&priv->rx_submitted).
However, this does not take into account that the USB framework unanchors
the URB before the complete function is called. This means that once an
in-URB has been completed, it is no longer anchored and is ultimately not
released in usb_kill_anchored_urbs().
Fix the memory leak by anchoring the URB in the
usb_8dev_read_bulk_callback() to the priv->rx_submitted anchor.
Fixes: 0024d8ad16 ("can: usb_8dev: Add support for USB2CAN interface from 8 devices")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260116-can_usb-fix-memory-leak-v2-5-4b8cb2915571@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 710a7529fb upstream.
Fix similar memory leak as in commit 7352e1d593 ("can: gs_usb:
gs_usb_receive_bulk_callback(): fix URB memory leak").
In mcba_usb_probe() -> mcba_usb_start(), the URBs for USB-in transfers are
allocated, added to the priv->rx_submitted anchor and submitted. In the
complete callback mcba_usb_read_bulk_callback(), the URBs are processed and
resubmitted. In mcba_usb_close() -> mcba_urb_unlink() the URBs are freed by
calling usb_kill_anchored_urbs(&priv->rx_submitted).
However, this does not take into account that the USB framework unanchors
the URB before the complete function is called. This means that once an
in-URB has been completed, it is no longer anchored and is ultimately not
released in usb_kill_anchored_urbs().
Fix the memory leak by anchoring the URB in the
mcba_usb_read_bulk_callback()to the priv->rx_submitted anchor.
Fixes: 51f3baad7d ("can: mcba_usb: Add support for Microchip CAN BUS Analyzer")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260116-can_usb-fix-memory-leak-v2-4-4b8cb2915571@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 248e8e1a12 upstream.
Fix similar memory leak as in commit 7352e1d593 ("can: gs_usb:
gs_usb_receive_bulk_callback(): fix URB memory leak").
In kvaser_usb_set_{,data_}bittiming() -> kvaser_usb_setup_rx_urbs(), the
URBs for USB-in transfers are allocated, added to the dev->rx_submitted
anchor and submitted. In the complete callback
kvaser_usb_read_bulk_callback(), the URBs are processed and resubmitted. In
kvaser_usb_remove_interfaces() the URBs are freed by calling
usb_kill_anchored_urbs(&dev->rx_submitted).
However, this does not take into account that the USB framework unanchors
the URB before the complete function is called. This means that once an
in-URB has been completed, it is no longer anchored and is ultimately not
released in usb_kill_anchored_urbs().
Fix the memory leak by anchoring the URB in the
kvaser_usb_read_bulk_callback() to the dev->rx_submitted anchor.
Fixes: 080f40a6fa ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260116-can_usb-fix-memory-leak-v2-3-4b8cb2915571@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5a4391bdc6 upstream.
Fix similar memory leak as in commit 7352e1d593 ("can: gs_usb:
gs_usb_receive_bulk_callback(): fix URB memory leak").
In esd_usb_open(), the URBs for USB-in transfers are allocated, added to
the dev->rx_submitted anchor and submitted. In the complete callback
esd_usb_read_bulk_callback(), the URBs are processed and resubmitted. In
esd_usb_close() the URBs are freed by calling
usb_kill_anchored_urbs(&dev->rx_submitted).
However, this does not take into account that the USB framework unanchors
the URB before the complete function is called. This means that once an
in-URB has been completed, it is no longer anchored and is ultimately not
released in esd_usb_close().
Fix the memory leak by anchoring the URB in the
esd_usb_read_bulk_callback() to the dev->rx_submitted anchor.
Fixes: 96d8e90382 ("can: Add driver for esd CAN-USB/2 device")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260116-can_usb-fix-memory-leak-v2-2-4b8cb2915571@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
