Currently there are four Powerpc specific sched topologies. These are
all statically defined. However not all these topologies are used by
all Powerpc systems.
To avoid unnecessary degenerations by the scheduler, masks and flags
are compared. However if the sched topologies are build dynamically then
the code is simpler and there are greater chances of avoiding
degenerations.
Note:
Even X86 builds its sched topologies dynamically and proposed changes
are very similar to the way X86 is building its topologies.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231214180720.310852-6-srikar@linux.vnet.ibm.com
PowerVM Hypervisor will schedule at a core granularity. However each
core can have more than one thread_groups. For better utilization in
case of a shared processor, its preferable for the scheduler to pack to
the lowest core. However there is no benefit of moving a thread between
two thread groups of the same core.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231214180720.310852-5-srikar@linux.vnet.ibm.com
There are some variables that are only updated at boot time.
So add __ro_after_init attribute to such variables
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231214180720.310852-4-srikar@linux.vnet.ibm.com
Like L2-cache info, coregroup information which is used to determine MC
sched domains is only present on dedicated LPARs. i.e PowerVM doesn't
export coregroup information for shared processor LPARs. Hence disable
creating MC domains on shared LPAR Systems.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231214180720.310852-3-srikar@linux.vnet.ibm.com
If there are shared processor LPARs, underlying Hypervisor can have more
virtual cores to handle than actual physical cores.
Starting with Power 9, a big core (aka SMT8 core) has 2 nearly
independent thread groups. On a shared processors LPARs, it helps to
pack threads to lesser number of cores so that the overall system
performance and utilization improves. PowerVM schedules at a big core
level. Hence packing to fewer cores helps.
Since each thread-group is independent, running threads on both the
thread-groups of a SMT8 core, should have a minimal adverse impact in
non over provisioned scenarios. These changes in this patchset will not
affect in the over provisioned scenario. If there are more threads than
SMT domains, then asym_packing will not kick-in
For example: Lets says there are two 8-core Shared LPARs that are
actually sharing a 8 Core shared physical pool, each running 8 threads
each. Then Consolidating 8 threads to 4 cores on each LPAR would help
them to perform better. This is because each of the LPAR will get
100% time to run applications and there will no switching required by
the Hypervisor.
To achieve this, enable SD_ASYM_PACKING flag at CACHE, MC and DIE level
when the system is running in shared processor mode and has big cores.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231214180720.310852-2-srikar@linux.vnet.ibm.com
No functional change in this patch. A helper is added to find if
vcpu is dispatched by hypervisor. Use that instead of opencoding.
Also clarify some of the comments.
Signed-off-by: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231114071219.198222-1-aneesh.kumar@linux.ibm.com
Here is the test result after conversion.
# ./fdb_flush.sh
TEST: vx10: Expected 5 FDB entries, got 5 [ OK ]
TEST: vx20: Expected 5 FDB entries, got 5 [ OK ]
...
TEST: vx10: Expected 5 FDB entries, got 5 [ OK ]
TEST: Test entries with dst 192.0.2.1 [ OK ]
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20231213060856.4030084-14-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Here is the test result after conversion.
# ./fib_tests.sh
Single path route test
Start point
TEST: IPv4 fibmatch [ OK ]
...
Fib6 garbage collection test
TEST: ipv6 route garbage collection [ OK ]
IPv4 multipath list receive tests
TEST: Multipath route hit ratio (1.00) [ OK ]
IPv6 multipath list receive tests
TEST: Multipath route hit ratio (1.00) [ OK ]
Tests passed: 225
Tests failed: 0
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20231213060856.4030084-13-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Here is the test result after conversion.
]# ./fib_rule_tests.sh
TEST: rule6 check: oif redirect to table [ OK ]
...
TEST: rule4 dsfield tcp connect (dsfield 0x07) [ OK ]
Tests passed: 66
Tests failed: 0
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20231213060856.4030084-12-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove PEER_CMD, which is not used in this test
Here is the test result after conversion.
]# ./fib-onlink-tests.sh
Error: ipv4: FIB table does not exist.
Flush terminated
Error: ipv6: FIB table does not exist.
Flush terminated
########################################
Configuring interfaces
...
TEST: Gateway resolves to wrong nexthop device - VRF [ OK ]
Tests passed: 38
Tests failed: 0
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20231213060856.4030084-11-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Here is the test result after conversion.
]# ./fib_nexthops.sh
Basic functional tests
----------------------
TEST: List with nothing defined [ OK ]
TEST: Nexthop get on non-existent id [ OK ]
...
TEST: IPv6 resilient nexthop group torture test [ OK ]
Tests passed: 234
Tests failed: 0
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20231213060856.4030084-10-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Here is the test result after conversion.
]# ./fib_nexthop_nongw.sh
TEST: nexthop: get route with nexthop without gw [ OK ]
TEST: nexthop: ping through nexthop without gw [ OK ]
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20231213060856.4030084-9-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Here is the test result after conversion.
]# ./fib_nexthop_multiprefix.sh
TEST: IPv4: host 0 to host 1, mtu 1300 [ OK ]
TEST: IPv6: host 0 to host 1, mtu 1300 [ OK ]
TEST: IPv4: host 0 to host 2, mtu 1350 [ OK ]
TEST: IPv6: host 0 to host 2, mtu 1350 [ OK ]
TEST: IPv4: host 0 to host 3, mtu 1400 [ OK ]
TEST: IPv6: host 0 to host 3, mtu 1400 [ OK ]
TEST: IPv4: host 0 to host 1, mtu 1300 [ OK ]
TEST: IPv6: host 0 to host 1, mtu 1300 [ OK ]
TEST: IPv4: host 0 to host 2, mtu 1350 [ OK ]
TEST: IPv6: host 0 to host 2, mtu 1350 [ OK ]
TEST: IPv4: host 0 to host 3, mtu 1400 [ OK ]
TEST: IPv6: host 0 to host 3, mtu 1400 [ OK ]
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20231213060856.4030084-8-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When running fib_nexthop_multiprefix test I saw all IPv6 test failed.
e.g.
]# ./fib_nexthop_multiprefix.sh
TEST: IPv4: host 0 to host 1, mtu 1300 [ OK ]
TEST: IPv6: host 0 to host 1, mtu 1300 [FAIL]
With -v it shows
COMMAND: ip netns exec h0 /usr/sbin/ping6 -s 1350 -c5 -w5 2001:db8:101::1
PING 2001:db8:101::1(2001:db8:101::1) 1350 data bytes
From 2001:db8:100::64 icmp_seq=1 Packet too big: mtu=1300
--- 2001:db8:101::1 ping statistics ---
1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms
Route get
2001:db8:101::1 via 2001:db8:100::64 dev eth0 src 2001:db8:100::1 metric 1024 expires 599sec mtu 1300 pref medium
Searching for:
2001:db8:101::1 from :: via 2001:db8:100::64 dev eth0 src 2001:db8:100::1 .* mtu 1300
The reason is when CONFIG_IPV6_SUBTREES is not enabled, rt6_fill_node() will
not put RTA_SRC info. After fix:
]# ./fib_nexthop_multiprefix.sh
TEST: IPv4: host 0 to host 1, mtu 1300 [ OK ]
TEST: IPv6: host 0 to host 1, mtu 1300 [ OK ]
Fixes: 735ab2f65d ("selftests: Add test with multiple prefixes using single nexthop")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20231213060856.4030084-7-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Here is the test result after conversion. There are some failures, but it
also exists on my system without this patch. So it's not affectec by
this patch and I will check the reason later.
]# time ./fcnal-test.sh
/usr/bin/which: no nettest in (/root/.local/bin:/root/bin:/usr/share/Modules/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin)
###########################################################################
IPv4 ping
###########################################################################
#################################################################
No VRF
SYSCTL: net.ipv4.raw_l3mdev_accept=0
TEST: ping out - ns-B IP [ OK ]
TEST: ping out, device bind - ns-B IP [ OK ]
TEST: ping out, address bind - ns-B IP [ OK ]
...
#################################################################
SNAT on VRF
TEST: IPv4 TCP connection over VRF with SNAT [ OK ]
TEST: IPv6 TCP connection over VRF with SNAT [ OK ]
Tests passed: 893
Tests failed: 21
real 52m48.178s
user 0m34.158s
sys 1m42.976s
BTW, this test needs a really long time. So expand the timeout to 1h.
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20231213060856.4030084-6-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As the name \${rt-${rt}} may make reader confuse, convert the variable
hs/rt in setup_rt/hs to hid, rid. Here is the test result after conversion.
]# ./srv6_end_dt6_l3vpn_test.sh
################################################################################
TEST SECTION: IPv6 routers connectivity test
################################################################################
TEST: Routers connectivity: rt-1 -> rt-2 [ OK ]
TEST: Routers connectivity: rt-2 -> rt-1 [ OK ]
...
TEST: Hosts isolation: hs-t200-4 -X-> hs-t100-2 [ OK ]
Tests passed: 18
Tests failed: 0
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20231213060856.4030084-5-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As the name \${rt-${rt}} may make reader confuse, convert the variable
hs/rt in setup_rt/hs to hid, rid. Here is the test result after conversion.
]# ./srv6_end_dt4_l3vpn_test.sh
################################################################################
TEST SECTION: IPv6 routers connectivity test
################################################################################
TEST: Routers connectivity: rt-1 -> rt-2 [ OK ]
TEST: Routers connectivity: rt-2 -> rt-1 [ OK ]
...
TEST: Hosts isolation: hs-t200-4 -X-> hs-t100-2 [ OK ]
Tests passed: 18
Tests failed: 0
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20231213060856.4030084-4-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As the name \${rt-${rt}} may make reader confuse, convert the variable
hs/rt in setup_rt/hs to hid, rid. Here is the test result after conversion.
]# ./srv6_end_dt46_l3vpn_test.sh
################################################################################
TEST SECTION: IPv6 routers connectivity test
################################################################################
TEST: Routers connectivity: rt-1 -> rt-2 [ OK ]
TEST: Routers connectivity: rt-2 -> rt-1 [ OK ]
...
TEST: IPv4 Hosts isolation: hs-t200-4 -X-> hs-t100-2 [ OK ]
Tests passed: 34
Tests failed: 0
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20231213060856.4030084-3-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a global variable NS_LIST to store all the namespaces that setup_ns
created, so the caller could call cleanup_all_ns() instead of remember
all the netns names when using cleanup_ns().
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20231213060856.4030084-2-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Justin Chen says:
====================
net: mdio: mdio-bcm-unimac: optimizations and clean up
Clean up mdio poll to use read_poll_timeout() and reduce the potential
poll time.
====================
Link: https://lore.kernel.org/r/20231213222744.2891184-1-justin.chen@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With a clock interval of 400 nsec and a 64 bit transactions (32 bit
preamble & 16 bit control & 16 bit data), it is reasonable to assume
the mdio transaction will take 25.6 usec. Add a 30 usec delay before
the first poll to reduce the chance of a 1000-2000 usec sleep.
Reduce the timeout from 1000ms to 100ms as it is unlikely for the bus
to take this long.
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20231213222744.2891184-2-justin.chen@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The typo from ocelot_port_rmon_stats_cb() was also carried over to
ocelot_port_pmac_rmon_stats_cb() as well, leading to incorrect TX RMON
stats for the pMAC too.
Fixes: ab3f97a961 ("net: mscc: ocelot: export ethtool MAC Merge stats for Felix VSC9959")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20231214000902.545625-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski says:
====================
tools: ynl-gen: fill in the gaps in support of legacy families
Fill in the gaps in YNL C code gen so that we can generate user
space code for all genetlink families for which we have specs.
The two major changes we need are support for fixed headers and
support for recursive nests.
For fixed header support - place the struct for the fixed header
directly in the request struct (and don't bother generating access
helpers). The member of a fixed header can't be too complex, and
also are by definition not optional so the user has to fill them in.
The YNL core needs a bit of a tweak to understand that the attrs
may now start at a fixed offset, which is not necessarily equal
to sizeof(struct genlmsghdr).
Dealing with nested sets is much harder. Previously we'd gen
the nested structs as:
struct outer {
struct inner inner;
};
If structs are recursive (e.g. inner contains outer again)
we must break this chain and allocate one of the structs
dynamically (store a pointer rather than full struct).
====================
Link: https://lore.kernel.org/r/20231213231432.2944749-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We avoid printing forward declarations and prototypes for most
types by sorting things topologically. But if structs nest we
do need the forward declarations, there's no other way.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20231213231432.2944749-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To avoid infinite nesting store recursive structs by pointer.
If recursive struct is placed in the op directly - the first
instance can be stored by value. That makes the code much
less of a pain for majority of practical uses.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20231213231432.2944749-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We try to keep the structures and helpers "topologically sorted",
to avoid forward declarations. When recursive nests are at play
we need to sort twice, because structs which end up being marked
as recursive will get a full set of forward declarations, so we
should ignore them for the purpose of sorting.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20231213231432.2944749-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Track which nests are recursive. Non-recursive nesting gets
rendered in C as directly nested structs. For recursive
ones we need to put a pointer in, rather than full struct.
Track this information, no change to generated code, yet.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20231213231432.2944749-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fill in more empty handlers for TypeUnused. When 'unused'
attr gets specified in a nested set we have to cleanly
skip it during code generation.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20231213231432.2944749-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Support genetlink families using simple fixed headers.
Assume fixed header is identical for all ops of the family for now.
Fixed headers are added to the request and reply structs as a _hdr
member, and copied to/from netlink messages appropriately.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20231213231432.2944749-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 30c9020015 ("tools: ynl-gen: use enum name from the spec")
added pre-cooked user type for enums. Use it to fix ignoring
enum-name provided in the spec.
This changes a type in struct ethtool_tunnel_udp_entry but is
generally inconsequential for current families.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20231213231432.2944749-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The code gen generates a prototype for dump request free
in the header, but no implementation in the source.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20231213231432.2944749-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Andrii Nakryiko says:
====================
BPF FS mount options parsing follow ups
Original BPF token patch set ([0]) added delegate_xxx mount options which
supported only special "any" value and hexadecimal bitmask. This patch set
attempts to make specifying and inspecting these mount options more
human-friendly by supporting string constants matching corresponding bpf_cmd,
bpf_map_type, bpf_prog_type, and bpf_attach_type enumerators.
This implementation relies on BTF information to find all supported symbolic
names. If kernel wasn't built with BTF, BPF FS will still support "any" and
hex-based mask.
[0] https://patchwork.kernel.org/project/netdevbpf/list/?series=805707&state=*
v1->v2:
- strip BPF_, BPF_MAP_TYPE_, and BPF_PROG_TYPE_ prefixes,
do case-insensitive comparison, normalize to lower case (Alexei).
====================
Link: https://lore.kernel.org/r/20231214225016.1209867-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Use both hex-based and string-based way to specify delegate mount
options for BPF FS.
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231214225016.1209867-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Besides already supported special "any" value and hex bit mask, support
string-based parsing of delegation masks based on exact enumerator
names. Utilize BTF information of `enum bpf_cmd`, `enum bpf_map_type`,
`enum bpf_prog_type`, and `enum bpf_attach_type` types to find supported
symbolic names (ignoring __MAX_xxx guard values and stripping repetitive
prefixes like BPF_ for cmd and attach types, BPF_MAP_TYPE_ for maps, and
BPF_PROG_TYPE_ for prog types). The case doesn't matter, but it is
normalized to lower case in mount option output. So "PROG_LOAD",
"prog_load", and "MAP_create" are all valid values to specify for
delegate_cmds options, "array" is among supported for map types, etc.
Besides supporting string values, we also support multiple values
specified at the same time, using colon (':') separator.
There are corresponding changes on bpf_show_options side to use known
values to print them in human-readable format, falling back to hex mask
printing, if there are any unrecognized bits. This shouldn't be
necessary when enum BTF information is present, but in general we should
always be able to fall back to this even if kernel was built without BTF.
As mentioned, emitted symbolic names are normalized to be all lower case.
Example below shows various ways to specify delegate_cmds options
through mount command and how mount options are printed back:
12/14 14:39:07.604
vmuser@archvm:~/local/linux/tools/testing/selftests/bpf
$ mount | rg token
$ sudo mkdir -p /sys/fs/bpf/token
$ sudo mount -t bpf bpffs /sys/fs/bpf/token \
-o delegate_cmds=prog_load:MAP_CREATE \
-o delegate_progs=kprobe \
-o delegate_attachs=xdp
$ mount | grep token
bpffs on /sys/fs/bpf/token type bpf (rw,relatime,delegate_cmds=map_create:prog_load,delegate_progs=kprobe,delegate_attachs=xdp)
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231214225016.1209867-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Xu says:
====================
Add bpf_xdp_get_xfrm_state() kfunc
This patchset adds two kfunc helpers, bpf_xdp_get_xfrm_state() and
bpf_xdp_xfrm_state_release() that wrap xfrm_state_lookup() and
xfrm_state_put(). The intent is to support software RSS (via XDP) for
the ongoing/upcoming ipsec pcpu work [0]. Recent experiments performed
on (hopefully) reproducible AWS testbeds indicate that single tunnel
pcpu ipsec can reach line rate on 100G ENA nics.
Note this patchset only tests/shows generic xfrm_state access. The
"secret sauce" (if you can really even call it that) involves accessing
a soon-to-be-upstreamed pcpu_num field in xfrm_state. Early example is
available here [1].
[0]: https://datatracker.ietf.org/doc/draft-ietf-ipsecme-multi-sa-performance/03/
[1]: e89a1c617a/xdp-bench/xdp_redirect_cpumap.bpf.c (L385-L406)
Changes from v5:
* Improve kfunc doc comments
* Remove extraneous replay-window setting on selftest reverse path
* Squash two kfunc commits into one
* Rebase to bpf-next to pick up bitfield write patches
* Remove testing of opts.error in selftest prog
Changes from v4:
* Fixup commit message for selftest
* Set opts->error -ENOENT for !x
* Revert single file xfrm + bpf
Changes from v3:
* Place all xfrm bpf integrations in xfrm_bpf.c
* Avoid using nval as a temporary
* Rebase to bpf-next
* Remove extraneous __failure_unpriv annotation for verifier tests
Changes from v2:
* Fix/simplify BPF_CORE_WRITE_BITFIELD() algorithm
* Added verifier tests for bitfield writes
* Fix state leakage across test_tunnel subtests
Changes from v1:
* Move xfrm tunnel tests to test_progs
* Fix writing to opts->error when opts is invalid
* Use __bpf_kfunc_start_defs()
* Remove unused vxlanhdr definition
* Add and use BPF_CORE_WRITE_BITFIELD() macro
* Make series bisect clean
Changes from RFCv2:
* Rebased to ipsec-next
* Fix netns leak
Changes from RFCv1:
* Add Antony's commit tags
* Add KF_ACQUIRE and KF_RELEASE semantics
====================
Reviewed-by: Eyal Birger <eyal.birger@gmail.com>
Link: https://lore.kernel.org/r/cover.1702593901.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This commit extends test_tunnel selftest to test the new XDP xfrm state
lookup kfunc.
Co-developed-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/e704e9a4332e3eac7b458e4bfdec8fcc6984cdb6.1702593901.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
test_progs is better than a shell script b/c C is a bit easier to
maintain than shell. Also it's easier to use new infra like memory
mapped global variables from C via bpf skeleton.
Co-developed-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/a350db9e08520c64544562d88ec005a039124d9b.1702593901.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
vmlinux.h declarations are more ergnomic, especially when working with
kfuncs. The uapi headers are often incomplete for kfunc definitions.
This commit also switches bitfield accesses to use CO-RE helpers.
Switching to vmlinux.h definitions makes the verifier very
unhappy with raw bitfield accesses. The error is:
; md.u.md2.dir = direction;
33: (69) r1 = *(u16 *)(r2 +11)
misaligned stack access off (0x0; 0x0)+-64+11 size 2
Fix by using CO-RE-aware bitfield reads and writes.
Co-developed-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/884bde1d9a351d126a3923886b945ea6b1b0776b.1702593901.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This commit adds an unstable kfunc helper to access internal xfrm_state
associated with an SA. This is intended to be used for the upcoming
IPsec pcpu work to assign special pcpu SAs to a particular CPU. In other
words: for custom software RSS.
That being said, the function that this kfunc wraps is fairly generic
and used for a lot of xfrm tasks. I'm sure people will find uses
elsewhere over time.
This commit also adds a corresponding bpf_xdp_xfrm_state_release() kfunc
to release the refcnt acquired by bpf_xdp_get_xfrm_state(). The verifier
will require that all acquired xfrm_state's are released.
Co-developed-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/a29699c42f5fad456b875c98dd11c6afc3ffb707.1702593901.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
drm/i915 fixes for v6.7-rc6:
- Fix selftest engine reset count storage for multi-tile
- Fix out-of-bounds reads for engine reset counts
- Fix ADL+ remapped stride with CCS
- Fix intel_atomic_setup_scalers() plane_state handling
- Fix ADL+ tiled plane stride when the POT stride is smaller than the original
- Fix eDP 1.4 rate select method link configuration
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/871qbqw4rw.fsf@intel.com