Commit graph

1,294,546 commits

Author SHA1 Message Date
Paul M Stillwell Jr
d96f04e05f ice: add documentation for FW logging
Add documentation for FW logging in
Documentation/networking/device_drivers/ethernet/intel/ice.rst

Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-14 09:51:02 -08:00
Paul M Stillwell Jr
9d3535e719 ice: add ability to read and configure FW log data
Once logging is enabled the user should read the data from the 'data'
file. The data is in the form of a binary blob that can be sent to Intel
for decoding. To read the data use a command like:

  # cat /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/data > log_data.bin

If the user wants to clear the FW log data that has been stored in the
driver then they can write any value to the 'data' file and that will clear
the data. An example is:

  # echo 34 > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/data

In addition to being able to read the data the user can configure how
much memory is used to store FW log data. This allows the user to
increase/decrease the amount of memory based on the users situation.
The data is stored such that if the memory fills up then the oldest data
will get overwritten in a circular manner. To change the amount of
memory the user can write to the 'log_size' file like this:

  # echo <value> > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/log_size

Where <value> is one of 128K, 256K, 512K, 1M, and 2M. The default value
is 1M.

The user can see the current value of 'log_size' by reading the file:

  # cat /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/log_size

Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-14 09:50:58 -08:00
Paul M Stillwell Jr
73671c3162 ice: enable FW logging
Once users have configured the FW logging then allow them to enable it
by writing to the 'fwlog/enable' file. The file accepts a boolean value
(0 or 1) where 1 means enable FW logging and 0 means disable FW logging.

  # echo <value> > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/enable

Where <value> is 0 or 1.

The user can read the 'fwlog/enable' file to see whether logging is
enabled or not. Reading the actual data is a separate patch. To see the
current value then:

  # cat /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/enable

Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-14 09:50:53 -08:00
Paul M Stillwell Jr
96a9a9341c ice: configure FW logging
Users want the ability to debug FW issues by retrieving the
FW logs from the E8xx devices. Use debugfs to allow the user to
configure the log level and number of messages for FW logging.

If FW logging is supported on the E8xx then the file 'fwlog' will be
created under the PCI device ID for the ice driver. If the file does not
exist then either the E8xx doesn't support FW logging or debugfs is not
enabled on the system.

One thing users want to do is control which events are reported. The
user can read and write the 'fwlog/modules/<module name>' to get/set
the log levels. Each module in the FW that supports logging ht as a file
under 'fwlog/modules' that supports reading (to see what the current log
level is) and writing (to change the log level).

The format to set the log levels for a module are:

  # echo <log level> > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/<module>

The supported log levels are:

      *	none
      *	error
      *	warning
      *	normal
      *	verbose

Each level includes the messages from the previous/lower level

The modules that are supported are:

      *	general
      *	ctrl
      *	link
      *	link_topo
      *	dnl
      *	i2c
      *	sdp
      *	mdio
      *	adminq
      *	hdma
      *	lldp
      *	dcbx
      *	dcb
      *	xlr
      *	nvm
      *	auth
      *	vpd
      *	iosf
      *	parser
      *	sw
      *	scheduler
      *	txq
      *	rsvd
      *	post
      *	watchdog
      *	task_dispatch
      *	mng
      *	synce
      *	health
      *	tsdrv
      *	pfreg
      *	mdlver
      *	all

The module 'all' is a special module which allows the user to read or
write to all of the modules.

The following example command would set the DCB module to the 'normal'
log level:

  # echo normal > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/dcb

If the user wants to set the DCB, Link, and the AdminQ modules to
'verbose' then the commands are:

  # echo verbose > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/dcb
  # echo verbose > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/link
  # echo verbose > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/adminq

If the user wants to set all modules to the 'warning' level then the
command is:

  # echo warning > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/all

If the user wants to disable logging for a module then they can set the
level to 'none'. An example setting the 'watchdog' module is:

  # echo none > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/watchdog

If the user wants to see what the log level is for a specific module
then the command is:

  # cat /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/dcb

This will return the log level for the DCB module. If the user wants to
see the log level for all the modules then the command is:

  # cat /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/all

Writing to the module file will update the configuration, but NOT enable the
configuration (that is a separate command).

In addition to configuring the modules, the user can also configure the
number of log messages (nr_messages) to include in a single Admin Receive
Queue (ARQ) event.The range is 1-128 (1 means push every log message, 128
means push only when the max AQ command buffer is full). The suggested
value is 10.

To see/change the resolution the user can read/write the
'fwlog/nr_messages' file. An example changing the value to 50 is

  # echo 50 > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/nr_messages

To see the current value of 'nr_messages' then the command is:

  # cat /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/nr_messages

Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-14 09:50:48 -08:00
Gao Xiang
8d2517aaee erofs: fix up compacted indexes for block size < 4096
Previously, the block size always equaled to PAGE_SIZE, therefore
`lclusterbits` couldn't be less than 12.

Since sub-page compressed blocks are now considered, `lobits` for
a lcluster in each pack cannot always be `lclusterbits` as before.
Otherwise, there is no enough room for the special value
`Z_EROFS_LI_D0_CBLKCNT`.

To support smaller block sizes, `lobits` for each compacted lcluster is
now calculated as:
   lobits = max(lclusterbits, ilog2(Z_EROFS_LI_D0_CBLKCNT) + 1)

Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20231206091057.87027-4-hsiangkao@linux.alibaba.com
2023-12-15 01:47:19 +08:00
Gao Xiang
54ed3fdd66 erofs: record pclustersize in bytes instead of pages
Currently, compressed sizes are recorded in pages using `pclusterpages`,
However, for tailpacking pclusters, `tailpacking_size` is used instead.

This approach doesn't work when dealing with sub-page blocks. To address
this, let's switch them to the unified `pclustersize` in bytes.

Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20231206091057.87027-3-hsiangkao@linux.alibaba.com
2023-12-15 01:47:06 +08:00
Gao Xiang
192351616a erofs: support I/O submission for sub-page compressed blocks
Add a basic I/O submission path first to support sub-page blocks:

 - Temporary short-lived pages will be used entirely;

 - In-place I/O pages can be used partially, but compressed pages need
   to be able to be mapped in contiguous virtual memory.

As a start, currently cache decompression is explicitly disabled for
sub-page blocks, which will be supported in the future.

Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20231206091057.87027-2-hsiangkao@linux.alibaba.com
2023-12-15 01:46:53 +08:00
Paul M Stillwell Jr
1953fc720e ice: remove FW logging code
The FW logging code doesn't work because there is no way to set
cq_ena or uart_ena so remove the code. This code is the original
(v1) way of FW logging so it should be replaced with the v2 way.

Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-14 09:43:04 -08:00
Christophe JAILLET
2db4578ef6 drm/tegra: output: Fix missing i2c_put_adapter() in the error handling paths of tegra_output_probe()
If an error occurs after a successful of_get_i2c_adapter_by_node() call, it
should be undone by a corresponding i2c_put_adapter().

Add the missing i2c_put_adapter() call.

Fixes: 9be7d864cf ("drm/tegra: Implement panel support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b38604178991e1f08b2cda219103be266be2d680.1693667005.git.christophe.jaillet@wanadoo.fr
2023-12-14 18:39:42 +01:00
Christophe JAILLET
45c8034db4 drm/tegra: rgb: Fix missing clk_put() in the error handling paths of tegra_dc_rgb_probe()
If clk_get_sys(..., "pll_d2_out0") fails, the clk_get_sys() call must be
undone.

Add the missing clk_put and a new 'put_pll_d_out0' label in the error
handling path, and use it.

Fixes: 0c921b6d4b ("drm/tegra: dc: rgb: Allow changing PLLD rate on Tegra30+")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0182895ead4e4730426616b0d9995954c960b634.1693667005.git.christophe.jaillet@wanadoo.fr
2023-12-14 18:39:10 +01:00
Christophe JAILLET
bc456b5d93 drm/tegra: rgb: Fix some error handling paths in tegra_dc_rgb_probe()
If an error occurs after calling tegra_output_probe(),
tegra_output_remove() should be called as already done in the remove
function.

Fixes: 59d29c0ec9 ("drm/tegra: Allocate resources at probe time")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0001f61eb89048bc36241629b564195689cf54b6.1693667005.git.christophe.jaillet@wanadoo.fr
2023-12-14 18:39:10 +01:00
Christophe JAILLET
643ae131b8 drm/tegra: hdmi: Fix some error handling paths in tegra_hdmi_probe()
If an error occurs after calling tegra_output_probe(),
tegra_output_remove() should be called as already done in the remove
function.

Fixes: 59d29c0ec9 ("drm/tegra: Allocate resources at probe time")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9b7c564eb71977678b20abd73ee52001a51cf327.1693667005.git.christophe.jaillet@wanadoo.fr
2023-12-14 18:39:10 +01:00
Christophe JAILLET
5286a9fc28 drm/tegra: dsi: Fix missing pm_runtime_disable() in the error handling path of tegra_dsi_probe()
If an error occurs after calling pm_runtime_enable(), pm_runtime_disable()
should be called as already done in the remove function.

Fixes: ef8187d752 ("drm/tegra: dsi: Implement runtime PM")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ee4a15c9cd4b574a55cd67c30d2411239ba2cee9.1693667005.git.christophe.jaillet@wanadoo.fr
2023-12-14 18:39:10 +01:00
Christophe JAILLET
830c1ded35 drm/tegra: dsi: Fix some error handling paths in tegra_dsi_probe()
If an error occurs after calling tegra_output_probe(),
tegra_output_remove() should be called as already done in the remove
function.

Fixes: dec727399a ("drm/tegra: Add DSI support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/16820073278d031f6c474a08d5f22a255158585e.1693667005.git.christophe.jaillet@wanadoo.fr
2023-12-14 18:39:07 +01:00
Bart Van Assche
f19d1e3b17 block: Use pr_info() instead of printk(KERN_INFO ...)
Switch to the modern style of printing kernel messages. Use %u instead
of %d to print unsigned integers.

Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Keith Busch <kbusch@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20231213194702.90381-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-12-14 10:28:56 -07:00
Zhang Shurong
0800880f4e drm/tegra: dpaux: Fix PM disable depth imbalance in tegra_dpaux_probe
The pm_runtime_enable function increases the power disable depth,
which means that we must perform a matching decrement on the error
handling path to maintain balance within the given context.
Additionally, we need to address the same issue for pm_runtime_get_sync.
We fix this by invoking pm_runtime_disable and pm_runtime_put_sync
when error returns.

Fixes: 82b81b3ec1 ("drm/tegra: dpaux: Implement runtime PM")
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/tencent_B13DB7F6C0023C46157250A524966F326A09@qq.com
2023-12-14 18:27:11 +01:00
Jani Nikula
11aa6d78ab drm/tegra: include drm/drm_edid.h only where needed
Reduce the need for rebuilds when drm_edid.h is modified by including it
only where needed.

v2: Fix build (kernel test robot <lkp@intel.com>)

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231213101951.3932273-1-jani.nikula@intel.com
2023-12-14 18:21:32 +01:00
Chen Ni
afe6fcb977 drm/tegra: dsi: Add missing check for of_find_device_by_node
Add check for the return value of of_find_device_by_node() and return
the error if it fails in order to avoid NULL pointer dereference.

Fixes: e94236cde4 ("drm/tegra: dsi: Add ganged mode support")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231024080738.825553-1-nichen@iscas.ac.cn
2023-12-14 18:20:23 +01:00
Patrick Delaunay
4fb98bed8a arm64: dts: st: add bsec support to stm32mp25
Add BSEC support to STM32MP25 SoC family with SoC information:
- RPN = Device part number (BSEC_OTP_DATA9)
- PKG = package data register (Bits 2:0 of BSEC_OTP_DATA122)

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2023-12-14 17:22:39 +01:00
Gao Xiang
3c12466b6b erofs: fix lz4 inplace decompression
Currently EROFS can map another compressed buffer for inplace
decompression, that was used to handle the cases that some pages of
compressed data are actually not in-place I/O.

However, like most simple LZ77 algorithms, LZ4 expects the compressed
data is arranged at the end of the decompressed buffer and it
explicitly uses memmove() to handle overlapping:
  __________________________________________________________
 |_ direction of decompression --> ____ |_ compressed data _|

Although EROFS arranges compressed data like this, it typically maps two
individual virtual buffers so the relative order is uncertain.
Previously, it was hardly observed since LZ4 only uses memmove() for
short overlapped literals and x86/arm64 memmove implementations seem to
completely cover it up and they don't have this issue.  Juhyung reported
that EROFS data corruption can be found on a new Intel x86 processor.
After some analysis, it seems that recent x86 processors with the new
FSRM feature expose this issue with "rep movsb".

Let's strictly use the decompressed buffer for lz4 inplace
decompression for now.  Later, as an useful improvement, we could try
to tie up these two buffers together in the correct order.

Reported-and-tested-by: Juhyung Park <qkrwngud825@gmail.com>
Closes: https://lore.kernel.org/r/CAD14+f2AVKf8Fa2OO1aAUdDNTDsVzzR6ctU_oJSmTyd6zSYR2Q@mail.gmail.com
Fixes: 0ffd71bcc3 ("staging: erofs: introduce LZ4 decompression inplace")
Fixes: 598162d050 ("erofs: support decompress big pcluster for lz4 backend")
Cc: stable <stable@vger.kernel.org> # 5.4+
Tested-by: Yifan Zhao <zhaoyifan@sjtu.edu.cn>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20231206045534.3920847-1-hsiangkao@linux.alibaba.com
2023-12-15 00:22:16 +08:00
Gao Xiang
93d6fda7f9 erofs: fix memory leak on short-lived bounced pages
Both MicroLZMA and DEFLATE algorithms can use short-lived pages on
demand for the overlapped inplace I/O decompression.

However, those short-lived pages are actually added to
`be->compressed_pages`.  Thus, it should be checked instead of
`pcl->compressed_bvecs`.

The LZ4 algorithm doesn't work like this, so it won't be impacted.

Fixes: 67139e36d9 ("erofs: introduce `z_erofs_parse_in_bvecs'")
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20231128180431.4116991-1-hsiangkao@linux.alibaba.com
2023-12-15 00:22:04 +08:00
Uwe Kleine-König
caa3415f34 ARM: dts: stm32: Consolidate usbh_[eo]hci phy properties on stm32mp15
All machines making use of &usbh_ehci and/or &usbh_ohci use

	phys = <&usbphyc_port0>;

So move this setting into the .dtsi. Also add

	phy-names = "usb";

which isn't used by all machines, but nice for consistency.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2023-12-14 16:59:42 +01:00
Baokun Li
665d3e0af4 ext4: reduce unnecessary memory allocation in alloc_flex_gd()
When a large flex_bg file system is resized, the number of groups to be
added may be small, and a large amount of memory that will not be used will
be allocated. Therefore, resize_bg can be set to the size after the number
of new_group_data to be used is aligned upwards to the power of 2. This
does not affect the disk layout after online resize and saves some memory.

Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231023013057.2117948-5-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-12-14 10:54:47 -05:00
Baokun Li
5d1935ac02 ext4: avoid online resizing failures due to oversized flex bg
When we online resize an ext4 filesystem with a oversized flexbg_size,

     mkfs.ext4 -F -G 67108864 $dev -b 4096 100M
     mount $dev $dir
     resize2fs $dev 16G

the following WARN_ON is triggered:
==================================================================
WARNING: CPU: 0 PID: 427 at mm/page_alloc.c:4402 __alloc_pages+0x411/0x550
Modules linked in: sg(E)
CPU: 0 PID: 427 Comm: resize2fs Tainted: G  E  6.6.0-rc5+ #314
RIP: 0010:__alloc_pages+0x411/0x550
Call Trace:
 <TASK>
 __kmalloc_large_node+0xa2/0x200
 __kmalloc+0x16e/0x290
 ext4_resize_fs+0x481/0xd80
 __ext4_ioctl+0x1616/0x1d90
 ext4_ioctl+0x12/0x20
 __x64_sys_ioctl+0xf0/0x150
 do_syscall_64+0x3b/0x90
==================================================================

This is because flexbg_size is too large and the size of the new_group_data
array to be allocated exceeds MAX_ORDER. Currently, the minimum value of
MAX_ORDER is 8, the minimum value of PAGE_SIZE is 4096, the corresponding
maximum number of groups that can be allocated is:

 (PAGE_SIZE << MAX_ORDER) / sizeof(struct ext4_new_group_data) ≈ 21845

And the value that is down-aligned to the power of 2 is 16384. Therefore,
this value is defined as MAX_RESIZE_BG, and the number of groups added
each time does not exceed this value during resizing, and is added multiple
times to complete the online resizing. The difference is that the metadata
in a flex_bg may be more dispersed.

Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231023013057.2117948-4-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-12-14 10:54:47 -05:00
Baokun Li
b099eb87de ext4: remove unnecessary check from alloc_flex_gd()
In commit 967ac8af44 ("ext4: fix potential integer overflow in
alloc_flex_gd()"), an overflow check is added to alloc_flex_gd() to
prevent the allocated memory from being smaller than expected due to
the overflow. However, after kmalloc() is replaced with kmalloc_array()
in commit 6da2ec5605 ("treewide: kmalloc() -> kmalloc_array()"), the
kmalloc_array() function has an overflow check, so the above problem
will not occur. Therefore, the extra check is removed.

Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231023013057.2117948-3-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-12-14 10:54:46 -05:00
Baokun Li
658a52344f ext4: unify the type of flexbg_size to unsigned int
The maximum value of flexbg_size is 2^31, but the maximum value of int
is (2^31 - 1), so overflow may occur when the type of flexbg_size is
declared as int.

For example, when uninit_mask is initialized in ext4_alloc_group_tables(),
if flexbg_size == 2^31, the initialized uninit_mask is incorrect, and this
may causes set_flexbg_block_bitmap() to trigger a BUG_ON().

Therefore, the flexbg_size type is declared as unsigned int to avoid
overflow and memory waste.

Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231023013057.2117948-2-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-12-14 10:54:46 -05:00
Miquel Raynal
a7d84a2e76 mtd: maps: vmu-flash: Fix the (mtd core) switch to ref counters
While switching to ref counters for track mtd devices use, the vmu-flash
driver was forgotten. The reason for reading the ref counter seems
debatable, but let's just fix the build for now.

Fixes: 19bfa9ebeb ("mtd: use refcount to prevent corruption")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312022315.79twVRZw-lkp@intel.com/
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20231205075936.13831-1-miquel.raynal@bootlin.com
2023-12-14 16:43:17 +01:00
Miquel Raynal
b511e8e05b mtd: ssfdc: Remove an unused variable
Since its introduction the driver was declaring a "usecount" variable,
but nobody ever used it upstream.

This was spot while grepping for usecount through mtd/ for other
reasons.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20231205075431.13401-1-miquel.raynal@bootlin.com
2023-12-14 16:43:15 +01:00
Dinghao Liu
2b8aa4c3e6 mtd: rawnand: diskonchip: fix a potential double free in doc_probe
When nand_scan() fails, it has cleaned up related resources
in its error paths. Therefore, the following nand_cleanup()
may lead to a double-free. One possible trace is:

doc_probe
  |-> nand_scan
  |     |-> nand_scan_with_ids
  |           |-> nand_scan_tail
  |                 |-> kfree(chip->data_buf) [First free]
  |
  |-> nand_cleanup
        |-> kfree(chip->data_buf) [Double free here]

Fix this by removing nand_cleanup() on failure of
nand_scan().

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20231214072946.10285-1-dinghao.liu@zju.edu.cn
2023-12-14 16:42:01 +01:00
Miquel Raynal
b6c985dd9a mtd: rawnand: rockchip: Add missing title to a kernel doc comment
All fields of the nfc_cfg structure are documented but the name, which
leads to a W=1 warning. Add a title.

Fixes: 058e0e847d ("mtd: rawnand: rockchip: NFC driver for RK3308, RK2928 and others")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20231211150704.109138-2-miquel.raynal@bootlin.com
2023-12-14 16:41:59 +01:00
Miquel Raynal
2ca8718be0 mtd: rawnand: rockchip: Rename a structure
Robots are unhappy with the ecc_cnt_status structure because the kernel
doc says it should be called rk_ecc_cnt_status. In general, it is
considered a better practice to prefix all symbols in a file with the
same prexif, and thus it seems more relevant to rename the structure
rather than changing the kernel doc header.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312102130.geZ4dqyN-lkp@intel.com/
Fixes: 058e0e847d ("mtd: rawnand: rockchip: NFC driver for RK3308, RK2928 and others")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20231211150704.109138-1-miquel.raynal@bootlin.com
2023-12-14 16:41:58 +01:00
Miquel Raynal
199d140222 mtd: rawnand: pl353: Fix kernel doc
Both the "chip" kernel doc member and description are wrong. This field
is called "chips" and describes the list of NAND chips connected to the
controller.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312102130.geZ4dqyN-lkp@intel.com/
Fixes: 08d8c62164 ("mtd: rawnand: pl353: Add support for the ARM PL353 SMC NAND controller")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20231211150524.108803-1-miquel.raynal@bootlin.com
2023-12-14 16:41:56 +01:00
Randy Dunlap
04d25ccea2 net, xdp: Correct grammar
Use the correct verb form in 2 places in the XDP rx-queue comment.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/bpf/20231213043735.30208-1-rdunlap@infradead.org
2023-12-14 16:38:59 +01:00
Ahmad Fatoum
bfc3c6743d ARM: dts: stm32: don't mix SCMI and non-SCMI board compatibles
The binding erroneously decreed that the SCMI variants of the ST
evaluation kits are compatible with the non-SCMI variants.

This is not correct, as a kernel or bootloader compatible with the non-SCMI
variant is not necessarily able to function, when direct access
to resources is replaced by having to talk SCMI to the secure monitor.

The binding has been adjusted to reflect thus, so synchronize the device
trees now.

Fixes: 5b7e58313a ("ARM: dts: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1)")
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2023-12-14 16:35:34 +01:00
Ahmad Fatoum
a55383dec6 dt-bindings: arm: stm32: don't mix SCMI and non-SCMI board compatibles
SCMI-enabled boards may restrict access to resources like clocks, resets
and regulators to the secure world.

A normal world bootloader or kernel compatible with the non-SCMI-enabled
board is thus not guaranteed to be able to deal with the SCMI variant.

It follows, that the SCMI-enabled board is not compatible with the
non-SCMI enabled board, so drop that compatible.

This change is motivated by the barebox' bootloader's use of bootloader
specification files[1][2]: barebox for non-SCMI DK2 will compare its
own top-level "stm32mp157c-dk2" compatible with all compatibles
listed in the device tree referenced by each bootloader spec file.
If the boot medium contains a configuration with
compatible = "st,stm32mp157c-dk2-scmi", "st,stm32mp157c-dk2", "st,stm32mp157";
it will match, because of the second compatible and boot a kernel with
SCMI enabled, although no SCMI may exist on the platform.

[1]: https://uapi-group.org/specifications/specs/boot_loader_specification/
[2]: https://www.barebox.org/doc/latest/user/booting-linux.html#boot-loader-specification

Fixes: 8e14ebb1f0 ("dt-bindings: arm: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1)")
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2023-12-14 16:35:31 +01:00
Miklos Szeredi
5bd3cf8cbc
add selftest for statmount/listmount
Initial selftest for the new statmount() and listmount() syscalls.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Link: https://lore.kernel.org/r/20231213161104.403171-1-mszeredi@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-12-14 16:13:59 +01:00
Tushar Vyavahare
2e1d6a0411 selftests/xsk: Fix for SEND_RECEIVE_UNALIGNED test
Fix test broken by shared umem test and framework enhancement commit.

Correct the current implementation of pkt_stream_replace_half() by
ensuring that nb_valid_entries are not set to half, as this is not true
for all the tests. Ensure that the expected value for valid_entries for
the SEND_RECEIVE_UNALIGNED test equals the total number of packets sent,
which is 4096.

Create a new function called pkt_stream_pkt_set() that allows for packet
modification to meet specific requirements while ensuring the accurate
maintenance of the valid packet count to prevent inconsistencies in packet
tracking.

Fixes: 6d198a89c0 ("selftests/xsk: Add a test for shared umem feature")
Reported-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20231214130007.33281-1-tushar.vyavahare@intel.com
2023-12-14 16:11:13 +01:00
Krzysztof Kozlowski
de4ec11145 ARM: dts: stm32: minor whitespace cleanup around '='
The DTS code coding style expects exactly one space before and after '='
sign.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2023-12-14 16:06:36 +01:00
Stefan Eichenberger
1b666016d0 net: mvpp2: add support for mii
Currently, mvpp2 only supports RGMII. This commit adds support for MII.
The description in Marvell's functional specification seems to be wrong.
To enable MII, we need to set GENCONF_CTRL0_PORT3_RGMII, while for RGMII
we need to clear it. This is also how U-Boot handles it.

Signed-off-by: Stefan Eichenberger <eichest@gmail.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20231212141200.62579-1-eichest@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-14 16:01:27 +01:00
Hsiao Chien Sung
73b5ab27ab drm/mediatek: Fix underrun in VDO1 when switches off the layer
Do not reset Merge while using CMDQ because reset API doesn't
wait for frame done event as CMDQ does and could lead to
underrun when the layer is switching off.

Fixes: aaf94f7c3a ("drm/mediatek: Add display merge async reset control")

Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231214055847.4936-23-shawn.sung@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
2023-12-14 14:57:34 +00:00
Hsiao Chien Sung
8ac6935e56 drm/mediatek: Remove the redundant driver data for DPI
DPI input is in 1T2P mode on both MT8195 and MT8188.
Remove the redundant driver data to align the settings, or
the screen will glitch.

Fixes: 2847cd7e64 ("drm/mediatek: Add mt8188 dpi compatibles and platform data")

Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231214055847.4936-22-shawn.sung@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
2023-12-14 14:55:48 +00:00
Hsiao Chien Sung
21b287146a drm/mediatek: Return error if MDP RDMA failed to enable the clock
Return the result of clk_prepare_enable() instead of
always returns 0.

Fixes: f8946e2b6b ("drm/mediatek: Add display MDP RDMA support for MT8195")

Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231214055847.4936-21-shawn.sung@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
2023-12-14 14:53:44 +00:00
Hsiao Chien Sung
ba527e9a11 drm/mediatek: Support MT8188 Padding in display driver
Padding is a new display module on MT8188, it provides ability
to add pixels to width and height of a layer with specified colors.

Due to hardware design, Mixer in VDOSYS1 requires width of a layer
to be 2-pixel-align, or 4-pixel-align when ETHDR is enabled,
we need Padding to deal with odd width.

Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231214055847.4936-19-shawn.sung@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
2023-12-14 14:45:36 +00:00
Hsiao Chien Sung
1168bb692b drm/mediatek: Refine device table of OVL adaptor
- Adjust indentation to align with other files
- Sort device table in alphabetical order
- Add sentinel to device table

Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231214055847.4936-18-shawn.sung@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
2023-12-14 14:42:41 +00:00
Hsiao Chien Sung
9c5a05fc8f drm/mediatek: Sort OVL adaptor components
Sort OVL adaptor components' names in alphabetical order.

Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231214055847.4936-17-shawn.sung@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
2023-12-14 14:40:59 +00:00
Hsiao Chien Sung
c90ca391c1 drm/mediatek: Start/Stop components with function pointers
By registering component related functions to the pointers,
we can easily manage them within a for-loop and simplify the
logic of component start/stop process.

Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231214055847.4936-16-shawn.sung@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
2023-12-14 14:36:17 +00:00
Hsiao Chien Sung
b97fa2f3e1 drm/mediatek: Power on/off devices with function pointers
Different from OVL, OVL adaptor is a pseudo device so we didn't
define it in the device tree, consequently, pm_runtime_resume_and_get()
called by .atomic_enable() powers on no device. For this reason, we
implement a function to power on the RDMAs in OVL adaptor, and the
system will make sure the IOMMUs are powered on as well because of the
device link (iommus) in the RDMA nodes in DTS.

This patch separates power and clock management process, it would be
easier to maintain and add extensions.

Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231214055847.4936-15-shawn.sung@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
2023-12-14 14:34:13 +00:00
Hsiao Chien Sung
7bacaee4f5 drm/mediatek: Manage component's clock with function pointers
By registering component related functions to the pointers,
we can easily manage them within a for-loop and simplify the
logic of clock control significantly.

Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231214055847.4936-14-shawn.sung@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
2023-12-14 14:32:45 +00:00
Joerg Roedel
3453c2b1d1 Arm SMMU updates for 6.8
- Device-tree binding updates:
   * Add additional compatible strings for Qualcomm SoCs
   * Document Adreno clocks for Qualcomm's SM8350 SoC
 
 - SMMUv2:
   * Implement support for the ->domain_alloc_paging() callback
   * Ensure Secure context is restored following suspend of Qualcomm SMMU
     implementation
 
 - SMMUv3:
   * Disable stalling mode for the "quiet" context descriptor
   * Minor refactoring and driver cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmV51JcQHHdpbGxAa2Vy
 bmVsLm9yZwAKCRC3rHDchMFjNMeSCACqYN4p5LyswEGOA7z/ZpyiLpW7Rbfw6mYj
 T+mLKgB9tLKw8Wp1nKM4MVylTxg2ykymUbRXahODbHC7au12u6ArXMm1jOzWGo7m
 ZoHyWzrSvUzQIFPXV49DaUcplOifWD/fHsp85k908SdM4QpaY9sn+ZWZqirXlpeo
 yJr0sOCR48bZeohBXRsZ+LFj0mDC8F1YwWdrND2cEtMEHqnSJasEJlUdujnROsCw
 V9pw47Nx6BPyp75HF38Tmy/g/WniwBITjBShb48rlUmyy2ddAPk4mSNXPvOdg+w9
 HhBh/C/Ck6gzvahbe6OmESpevRPr3GF+rhzXe9r685PPssKLBN1o
 =j3OC
 -----END PGP SIGNATURE-----

Merge tag 'arm-smmu-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into arm/smmu

Arm SMMU updates for 6.8

- Device-tree binding updates:
  * Add additional compatible strings for Qualcomm SoCs
  * Document Adreno clocks for Qualcomm's SM8350 SoC

- SMMUv2:
  * Implement support for the ->domain_alloc_paging() callback
  * Ensure Secure context is restored following suspend of Qualcomm SMMU
    implementation

- SMMUv3:
  * Disable stalling mode for the "quiet" context descriptor
  * Minor refactoring and driver cleanups
2023-12-14 15:32:01 +01:00
Hsiao Chien Sung
8daf02f03c drm/mediatek: Add component ID to component match structure
Add component ID to component match structure so we can
configure them with a for-loop.

The main reason we do such code refactoring is that
there is a new hardware component called "Padding" since
MT8188, while MT8195 doesn't have this module, we can't
use the original logic to manage the components.

While MT8195 does not define Padding in the device tree,
the corresponding components will be NULL and being skipped
by the functions.

Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231214055847.4936-13-shawn.sung@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
2023-12-14 14:31:08 +00:00