This fixes an assertion pop in btree_iter.c that checks for forgetting
to pass a snapshot ID when iterating over snapshots btrees.
Reported-by: syzbot+0dfe05235e38653e2aee@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This fixes missing guards on trying to calculate a checksum with an
invalid/unknown checksum type; moving the guards up to e.g. btree_io.c
might be "more correct", but doesn't buy us anything - an unknown
checksum type will always be flagged as at least a checksum error so we
aren't losing any safety doing it this way and it makes it less likely
to accidentally pop an assert we don't want.
Reported-by: syzbot+e951ad5349f3a34a715a@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Don't put error pointers in bch_fs, that's gross.
This fixes (?) the check in bch2_checksum_type_valid() - depending on
our error paths, or depending on what our error paths are doing it at
least makes the code saner.
Reported-by: syzbot+2e3cb81b5d1fe18a374b@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We additionally need to be going inconsistent if passed an invalid
snapshot ID; that patch will need more thorough testing.
Reported-by: syzbot+1c9fca23fe478633b305@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We can't disallow unknown data_types in verify() - we have to preserve
them unchanged for backwards compat; that means we have to add a few
more guards.
Reported-by: syzbot+249018ea545364f78d04@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Since commit a2ad63daa8 ("VFS: add FMODE_CAN_ODIRECT file flag") file
systems can just set the FMODE_CAN_ODIRECT flag at open time instead of
wiring up a dummy direct_IO method to indicate support for direct I/O.
Do that for bcachefs so that noop_direct_IO can eventually be removed.
Similar to commit b294349993 ("xfs: set FMODE_CAN_ODIRECT instead of
a dummy direct_IO method").
Signed-off-by: Youling Tang <tangyouling@kylinos.cn>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
It took me some time to understand the purpose of the tricky code at
the end of arch/x86/Kconfig.debug.
Without it, the following would be shown:
WARNING: unmet direct dependencies detected for FRAME_POINTER
because
81d3871900 ("x86/kconfig: Consolidate unwinders into multiple choice selection")
removed 'select ARCH_WANT_FRAME_POINTERS'.
The correct and more straightforward approach should have been to move
it where 'select FRAME_POINTER' is located.
Several architectures properly handle the conditional selection of
ARCH_WANT_FRAME_POINTERS. For example, 'config UNWINDER_FRAME_POINTER'
in arch/arm/Kconfig.debug.
Fixes: 81d3871900 ("x86/kconfig: Consolidate unwinders into multiple choice selection")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20240204122003.53795-1-masahiroy@kernel.org
- Fix/unify misc vertical alignment inconsistencies
- Make CPP macros look a bit more like C code by adding
an empty line after local variable declaration blocks,
and before final rvalue statements.
No change in code.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org
Rename percpu_stable_op() to __raw_cpu_read_stable() to be
in line with other read/write percpu accessors.
No functional change intended.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20240520080951.121049-1-ubizjak@gmail.com
Remove unused 'agc_work' and 'vco_work' members of 'struct link'.
This follows commit d96324703f ("rt2x00: merge agc and vco works
with link tuner") where AGC and VCO calibration code was completely
redesigned. Compile tested only.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240515152824.143537-1-dmantipov@yandex.ru
On LunarLake maximum for IO and Fast Wake time line counts are 68: 6 bits +
5 lines added by the HW. Take this into account in calculation and when
writing the IO Wake lines.
v2: maximum line count is 68 (6 bits + 5 lines added by HW)
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240517073005.2414293-2-jouni.hogander@intel.com
Document the Inter-Processor Communication Controller on the SDX75 Platform.
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Add compatible for the Qualcomm MSM8974 APCS block.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The only generic interface to execute asynchronously in the BH context is
tasklet; however, it's marked deprecated and has some design flaws. To
replace tasklets, BH workqueue support was recently added. A BH workqueue
behaves similarly to regular workqueues except that the queued work items
are executed in the BH context.
Based on the work done by Tejun Heo <tj@kernel.org>
Branch: https://git.kernel.org/pub/scm/linux/kernel/git/tj/wq.git for-6.10
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The return value of pm_runtime_get_sync() in cmdq_mbox_shutdown()
will return 1 when pm runtime state is active, and we don't want to
get the warning message in this case.
So we change the return value < 0 for WARN_ON().
Fixes: 8afe816b0c ("mailbox: mtk-cmdq-mailbox: Implement Runtime PM with autosuspend")
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Add MODULE_DEVICE_TABLE(), so this module could be properly autoloaded
based on the alias from of_device_id table.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
At least one IPI is used in TF-A for communication with PMC firmware.
If this IPI needs to be used by other agents such as RPU then, IPI
system interrupt can't be generated in mailbox driver. In such case
TF-A generates SGI to mailbox driver for IPI notification.
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Signed-off-by: Saeed Nowshadi <saeed.nowshadi@amd.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Add support for ARM MHUv3 mailbox controller.
Support is limited to the MHUv3 Doorbell extension using only the PBX/MBX
combined interrupts.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Add bindings for the ARM MHUv3 Mailbox controller.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The kernel FIFO queue has a couple issues. The biggest issue is that
it causes extra latency in a path that can be used in real-time tasks,
such as communication with real-time remote processors.
The whole FIFO idea itself looks to be a leftover from before the
unified mailbox framework. The current mailbox framework expects
mbox_chan_received_data() to be called with data immediately as it
arrives. Remove the FIFO and pass the messages to the mailbox
framework directly as part of a threaded IRQ handler.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
It is much more clear to check if the hardware FIFO is full and return
EBUSY if true. This allows us to also remove one level of indention
from the core of this function. It also makes the similarities between
omap_mbox_chan_send_noirq() and omap_mbox_chan_send() more obvious.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
This function only checks if mbox_chan *chan is not NULL, but that cannot
be the case and if it was returning NULL which is not later checked
doesn't save us from this. The second check for chan->con_priv is
completely redundant as if it was NULL we would return NULL just the
same. Simply dereference con_priv directly and remove this function.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The driver stores a list of omap_mbox structs so it can later use it to
lookup the mailbox names in of_xlate. This same information is already
available in the mbox_controller passed into of_xlate. Simply use that
data and remove the extra allocation and storage of the omap_mbox list.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The mbox_controller struct is only needed in the probe function. Make
it a local variable instead of storing a copy in omap_mbox_device
to simplify that struct.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Currently the driver loops through all mailbox child nodes twice, once
to read in data from each node, and again to make use of this data.
Instead read the data and make use of it in one pass. This removes
the need for several temporary data structures and reduces the
complexity of this main loop in probe.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Use device life-cycle managed runtime enable function to simplify probe
and exit paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The driver currently creates a new device class "mbox". Then for each
mailbox adds a device to that class. This class provides no file
operations provided for any userspace users of this device class.
It may have been extended to be functional in our vendor tree at
some point, but that is not the case anymore, nor does it matter
for the upstream tree.
Remove this device class and related functions and variables.
This also allows us to switch to module_platform_driver() as
there is nothing left to do in module_init().
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The type of message sent using omap-mailbox is always u32. The definition
of mbox_msg_t is uintptr_t which is wrong as that type changes based on
the architecture (32bit vs 64bit). This type should have been defined as
u32. Instead of making that change here, simply remove the header usage
and fix the last couple users of the same in this driver.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The mbox_kfifo_size can be changed at runtime, the sanity
check on it's value should be done when it is used, not
only once at init time.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
This is only used internal to the driver, move it out of the
public header and into the driver file. While we are here,
this is not used as a bitwise, so drop that and make it a
simple enum type.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
These function are not used, remove these here.
While here, remove the leading _ from the driver internal functions that
do the same thing as the functions removed.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
If an input device declares too many capability bits then modalias
string for such device may become too long and not fit into uevent
buffer, resulting in failure of sending said uevent. This, in turn,
may prevent userspace from recognizing existence of such devices.
This is typically not a concern for real hardware devices as they have
limited number of keys, but happen with synthetic devices such as
ones created by xen-kbdfront driver, which creates devices as being
capable of delivering all possible keys, since it doesn't know what
keys the backend may produce.
To deal with such devices input core will attempt to trim key data,
in the hope that the rest of modalias string will fit in the given
buffer. When trimming key data it will indicate that it is not
complete by placing "+," sign, resulting in conversions like this:
old: k71,72,73,74,78,7A,7B,7C,7D,8E,9E,A4,AD,E0,E1,E4,F8,174,
new: k71,72,73,74,78,7A,7B,7C,+,
This should allow existing udev rules continue to work with existing
devices, and will also allow writing more complex rules that would
recognize trimmed modalias and check input device characteristics by
other means (for example by parsing KEY= data in uevent or parsing
input device sysfs attributes).
Note that the driver core may try adding more uevent environment
variables once input core is done adding its own, so when forming
modalias we can not use the entire available buffer, so we reduce
it by somewhat an arbitrary amount (96 bytes).
Reported-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Jason Andryuk <jandryuk@gmail.com>
Link: https://lore.kernel.org/r/ZjAWMQCJdrxZkvkB@google.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Update header inclusions to follow IWYU (Include What You Use)
principle.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
The bitops.h is for bit related operations. The aligned_byte_mask()
is about byte (or part of the machine word) operations, for which
we have a separate header, move the mentioned macro to wordpart.h
to consolidate similar operations.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Bitops API is the very basic, and it's widely used by the kernel. But
corresponding files are not maintained.
Bitmaps actively use bit operations, and big share of bitops material
already moves through the bitmap branch.
I would like to take a closer look to bitops.
This patch creates a BITOPS API record in the MAINTAINERS, and adds
Rasmus as a reviewer, and myself as a maintainer of those files.
CC: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
The page-owner tracking code records stack traces during page allocation.
To do this, it must do a memory allocation for the stack information from
inside an existing memory allocation context. This internal allocation
must obey the high level caller allocation constraints to avoid generating
false positive warnings that have nothing to do with the code they are
instrumenting/tracking (e.g. through lockdep reclaim state tracking)
We also don't want recording stack traces to deplete emergency memory
reserves - debug code is useless if it creates new issues that can't be
replicated when the debug code is disabled.
Switch the stack tracking allocation masking to use gfp_nested_mask() to
address these issues. gfp_nested_mask() naturally strips GFP_ZONEMASK,
too, which greatly simplifies this code.
Link: https://lkml.kernel.org/r/20240430054604.4169568-4-david@fromorbit.com
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The stackdepot code is used by KASAN and lockdep for recoding stack
traces. Both of these track allocation context information, and so their
internal allocations must obey the caller allocation contexts to avoid
generating their own false positive warnings that have nothing to do with
the code they are instrumenting/tracking.
We also don't want recording stack traces to deplete emergency memory
reserves - debug code is useless if it creates new issues that can't be
replicated when the debug code is disabled.
Switch the stackdepot allocation masking to use gfp_nested_mask() to
address these issues. gfp_nested_mask() also strips GFP_ZONEMASK
naturally, so that greatly simplifies this code.
Link: https://lkml.kernel.org/r/20240430054604.4169568-3-david@fromorbit.com
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: fix nested allocation context filtering".
This patchset is the followup to the comment I made earlier today:
https://lore.kernel.org/linux-xfs/ZjAyIWUzDipofHFJ@dread.disaster.area/
Tl;dr: Memory allocations that are done inside the public memory
allocation API need to obey the reclaim recursion constraints placed on
the allocation by the original caller, including the "don't track
recursion for this allocation" case defined by __GFP_NOLOCKDEP.
These nested allocations are generally in debug code that is tracking
something about the allocation (kmemleak, KASAN, etc) and so are
allocating private kernel objects that only that debug system will use.
Neither the page-owner code nor the stack depot code get this right. They
also also clear GFP_ZONEMASK as a separate operation, which is completely
redundant because the constraint filter applied immediately after
guarantees that GFP_ZONEMASK bits are cleared.
kmemleak gets this filtering right. It preserves the allocation
constraints for deadlock prevention and clears all other context flags
whilst also ensuring that the nested allocation will fail quickly,
silently and without depleting emergency kernel reserves if there is no
memory available.
This can be made much more robust, immune to whack-a-mole games and the
code greatly simplified by lifting gfp_kmemleak_mask() to
include/linux/gfp.h and using that everywhere. Also document it so that
there is no excuse for not knowing about it when writing new debug code
that nests allocations.
Tested with lockdep, KASAN + page_owner=on and kmemleak=on over multiple
fstests runs with XFS.
This patch (of 3):
Any "internal" nested allocation done from within an allocation context
needs to obey the high level allocation gfp_mask constraints. This is
necessary for debug code like KASAN, kmemleak, lockdep, etc that allocate
memory for saving stack traces and other information during memory
allocation. If they don't obey things like __GFP_NOLOCKDEP or
__GFP_NOWARN, they produce false positive failure detections.
kmemleak gets this right by using gfp_kmemleak_mask() to pass through the
relevant context flags to the nested allocation to ensure that the
allocation follows the constraints of the caller context.
KASAN recently was foudn to be missing __GFP_NOLOCKDEP due to stack depot
allocations, and even more recently the page owner tracking code was also
found to be missing __GFP_NOLOCKDEP support.
We also don't wan't want KASAN or lockdep to drive the system into OOM
kill territory by exhausting emergency reserves. This is something that
kmemleak also gets right by adding (__GFP_NORETRY | __GFP_NOMEMALLOC |
__GFP_NOWARN) to the allocation mask.
Hence it is clear that we need to define a common nested allocation filter
mask for these sorts of third party nested allocations used in debug code.
So to start this process, lift gfp_kmemleak_mask() to gfp.h and rename it
to gfp_nested_mask(), and convert the kmemleak callers to use it.
Link: https://lkml.kernel.org/r/20240430054604.4169568-1-david@fromorbit.com
Link: https://lkml.kernel.org/r/20240430054604.4169568-2-david@fromorbit.com
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The implementation of writing a zero-fill block in
nilfs_finish_roll_forward() is not safe. The buffer is being cleared
without acquiring a lock or setting the uptodate flag, so theoretically,
between the time the buffer's data is cleared and the time it is written
back to the block device using sync_dirty_buffer(), that zero data can be
undone by concurrent block device reads.
Since this buffer points to a location that has been read from disk once,
the uptodate flag will most likely remain, but since it was obtained with
__getblk(), that is not guaranteed. In other words, this is exceptional,
and this function itself is not normally called (only once when mounting
after a specific pattern of unclean shutdown), so it is highly unlikely
that this will actually cause a problem.
Anyway, eliminate this potential race issue by protecting the clearing of
buffer data with a buffer lock and setting the buffer's uptodate flag
within the protected section.
Link: https://lkml.kernel.org/r/20240511002942.9608-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
