Disable HDCP Line Rekeying when HDCP ver > 1.4 and when we are
on HDMI TMDS operation for DISPLAY_VER >= 14.
--v2
-Wa to be mentioned in comments not in commit message [Jani]
-Remove blankline [Jani]
--v3
-No need to write what is being done in comments when code
is self explanatory [Jani]
--v4
-Add comment regarding need of this WA when in TMDS mode
[Chaitanya]
-Write in chicken register for MTL [CHaitanya]
--v5
-Fix comment [Chaitanya]
-Use correct set and clear value in intel_de_rmw [Chaitanya]
--v6
-No need to define C, D chicken bits it gets calculated [Animesh]
Bspec: 49273
Bspec: 69964
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240507062243.1076047-2-suraj.kandpal@intel.com
Thanks to the somewhat asymmetrical nature, while removing
iommu_setup_dma_ops() from the arch_setup_dma_ops() flow, I managed to
forget that arm64's teardown path was also specific to iommu-dma. Clean
that up to match, otherwise probe deferral will lead to the arch code
erroneously removing DMA ops set elsewhere.
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/linux-iommu/Zi_LV28TR-P-PzXi@eriador.lumag.spb.ru/
Fixes: b67483b3c4 ("iommu/dma: Centralise iommu_setup_dma_ops()")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Will Deacon <will@kernel.org>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/d4cc20cbb0c45175e98dd76bf187e2ad6421296d.1714472573.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Fix the fileserver rotation code in a couple of ways:
(1) op->server_states is an array, not a pointer to a single record, so
fix the places that access it to index it.
(2) In the places that go through an address list to work out which one
has the best priority, fix the loops to skip known failed addresses.
Without this, the rotation algorithm may get stuck on addresses that are
inaccessible or don't respond.
This can be triggered manually by finding a server that advertises a
non-routable address and giving it a higher priority, eg.:
echo "add udp 192.168.0.0/16 3000" >/proc/fs/afs/addr_prefs
if the server, say, includes the address 192.168.7.7 in its address list,
and then attempting to access a volume on that server.
Fixes: 495f2ae9e3 ("afs: Fix fileserver rotation")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/4005300.1712309731@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/998836.1714746152@warthog.procyon.org.uk
Signed-off-by: Christian Brauner <brauner@kernel.org>
Append the additional parameters passed/set in the dedicated parameter
area (RTAS_FADUMP_PARAM_AREA) to bootargs in fadump capture kernel.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240509115755.519982-4-hbathini@linux.ibm.com
For fadump case, passing additional parameters to dump capture kernel
helps in minimizing the memory footprint for it and also provides the
flexibility to disable components/modules, like hugepages, that are
hindering the boot process of the special dump capture environment.
Set up a dedicated parameter area to be passed to the capture kernel.
This area type is defined as RTAS_FADUMP_PARAM_AREA. Sysfs attribute
'/sys/kernel/fadump/bootargs_append' is exported to the userspace to
specify the additional parameters to be passed to the capture kernel
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240509115755.519982-3-hbathini@linux.ibm.com
Currently, fadump on pseries assumes a single boot memory region even
though f/w supports more than one boot memory region. Add support for
more boot memory regions to make the implementation flexible for any
enhancements that introduce other region types. For this, rtas memory
structure for fadump is updated to have multiple boot memory regions
instead of just one. Additionally, methods responsible for creating
the fadump memory structure during both the first and second kernel
boot have been modified to take these multiple boot memory regions
into account. Also, a new callback has been added to the fadump_ops
structure to get the maximum boot memory regions supported by the
platform.
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240509115755.519982-2-hbathini@linux.ibm.com
Often userspace needs to know whether two file descriptors refer to the
same struct file. For example, systemd uses this to filter out duplicate
file descriptors in it's file descriptor store (cf. [1]) and vulkan uses
it to compare dma-buf fds (cf. [2]).
The only api we provided for this was kcmp() but that's not generally
available or might be disallowed because it is way more powerful (allows
ordering of file pointers, operates on non-current task) etc. So give
userspace a simple way of comparing two file descriptors for sameness
adding a new fcntl() F_DUDFD_QUERY.
Link: a4f0e0da35/src/basic/fd-util.c (L517) [1]
Link: https://gitlab.freedesktop.org/wlroots/wlroots/-/blob/master/render/vulkan/texture.c#L490 [2]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[brauner: commit message]
Signed-off-by: Christian Brauner <brauner@kernel.org>
enumeration_complete will be completed when a peripheral is attached.
And initialization_complete will be completed when a peripheral is
initialized. rt715_dev_resume() should wait for initialization_complete
instead of enumeration_complete.
the issue exists since commit 20d17057f0 ("ASoC: rt715-sdca: Add RT715
sdca vendor-specific driver"), but the commit can only apply to
commit f892e66fca ("ASoC: rt-sdw*: add __func__ to all error logs").
Fixes: f892e66fca ("ASoC: rt-sdw*: add __func__ to all error logs")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240509163658.68062-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
get_codec_name_and_route() get dai name from the first codec dai in a dai
link. However, the dai may not always be the first codec dai. Use the
dai parameter to make sure get_codec_name_and_route() refers to the
correct dai.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240509163418.67746-19-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A generic .rtd_init() callback could be used by different dais. It is
useful to pass dai parameter to the callback. The dai parameter will be
used in the follow up commit. No functional change here.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240509163418.67746-18-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sof_sdw_rtd_init() will add the controls and widgets if we set them in
the codec_info. Move the additions from .rtd_init callback to
sof_sdw_rtd_init().
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240509163418.67746-17-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, we add card controls and dapm widgets one by one in the
codec_info->dais->rtd_init callback. Duplicated controls and dapm
widgets will be added if there are more than one types of amps in the
dai link. Moving it to sof_sdw_rtd_init() and only add the
controls/widgets of the first codec dai can avoid the duplications.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240509163418.67746-16-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some controls and widgets have exactly the same items. Rename them to be
generic. This is a preparation for further cleanup. No function change.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240509163418.67746-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To be consistent to other amps that used in the machine driver.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240509163418.67746-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since there is dai link helper max_98373_dai_link, we could change all
functions and data of max98373 to static.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240509163418.67746-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add dapm routes of max98373 to sdw driver and remove dependency of
maxim-common module.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240509163418.67746-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use max_98373_dai_link() function to initialize dai link of maxim
max98373 speaker amplifier. No functional change.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240509163418.67746-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use max_98373_dai_link() function to initialize dai link of maxim
max98373 speaker amplifier. No functional change.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240509163418.67746-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use max_98373_dai_link() function to initialize dai link of maxim
max98373 speaker amplifier. No functional change.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240509163418.67746-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a helper function, max_98373_dai_link(), for machine driver to
initialize dai link of maxim max98373 speaker amplifier.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240509163418.67746-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cs42l43 is on link 0. No amp in this configuration, will use cs42l43
speaker or bridge.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240509163418.67746-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cs42l43 is on link 0. No amp in this configuration, will use cs42l43
speaker or bridge.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240509163418.67746-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The original code for rt1015p could support 1 or 2 rt1015p device
instances in ACPI. However, all designs implement only 1 instance in
ACPI table so we remove the code segment which is for 2 instances.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240509163418.67746-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since mtl chromebook is using DMI quirk for board config, changing the
SSP port config of mtl_rt5682_def to RVP to simplify mtl board id and
enumeration table.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240509163418.67746-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The quirk for cml chromebook hatch could be removed since we have
cml_rt5682_def board id now.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240509163418.67746-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Realtek new SoundWire codecs are all -sdca version. No need to add
-sdca to distinguish the non-sdca version. To be consistent with "spk:"
and "mic:" components string, remove "-sdca" suffix from "hs:"
components string.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240509163418.67746-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since the VFS type argument test case uses fprobe events, it must
check the availablity of dynamic_events file and fprobe events syntax
in README. Without this fix, the test fails if CONFIG_FPROBE_EVENTS=n.
Link: https://lore.kernel.org/all/171478301645.110267.464634740467398506.stgit@devnote2/
Fixes: ee97e5e135 ("selftests/ftrace: add fprobe test cases for VFS type "%pd" and "%pD"")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
The driver doesn't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
While add it, also remove the trailing commas after the sentinel entry.
Link: https://lore.kernel.org/r/20240508130618.2148631-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
It missed to call dec_valid_node_count() to release node block count
in error path, fix it.
Fixes: 141170b759 ("f2fs: fix to avoid use f2fs_bug_on() in f2fs_new_node_page()")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
It needs to cover {reserve,release}_compress_blocks() w/ cp_rwsem lock
to avoid racing with checkpoint, otherwise, filesystem metadata including
blkaddr in dnode, inode fields and .total_valid_block_count may be
corrupted after SPO case.
Fixes: ef8d563f18 ("f2fs: introduce F2FS_IOC_RELEASE_COMPRESS_BLOCKS")
Fixes: c75488fb4d ("f2fs: introduce F2FS_IOC_RESERVE_COMPRESS_BLOCKS")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If inc_valid_block_count() can not allocate all requested blocks,
it needs to release block count in .total_valid_block_count and
resevation blocks in inode.
Fixes: 5460749487 ("f2fs: compress: fix to avoid inconsistence bewteen i_blocks and dnode")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previously, we account reserved blocks and compressed blocks into
@compr_blocks, then, f2fs_i_compr_blocks_update(,compr_blocks) will
update i_compr_blocks incorrectly, fix it.
Meanwhile, for the case all blocks in cluster were reserved, fix to
update dn->ofs_in_node correctly.
Fixes: eb8fbaa533 ("f2fs: compress: fix to check unreleased compressed cluster")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
DCCP is going away soon, and had no twsk_unique() method.
We can directly call tcp_twsk_unique() for TCP sockets.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240507164140.940547-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In ptp_ocp driver pin actions assume sma_nr starts with 1, but for DPLL
subsystem callback 0-based index was used. Fix it providing proper index.
Fixes: 09eeb3aecc ("ptp_ocp: implement DPLL ops")
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://lore.kernel.org/r/20240508132111.11545-1-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Applications are sensitive to long network latency, particularly
heartbeat monitoring ones. Longer the tx timeout recovery higher the
risk with such applications on a production machines. This patch
remedies, yet honoring device set tx timeout.
Modify watchdog next timeout to be shorter than the device specified.
Compute the next timeout be equal to device watchdog timeout less the
how long ago queue stop had been done. At next watchdog timeout tx
timeout handler is called into if still in stopped state. Either called
or not called, restore the watchdog timeout back to device specified.
Signed-off-by: Praveen Kumar Kannoju <praveen.kannoju@oracle.com>
Link: https://lore.kernel.org/r/20240508133617.4424-1-praveen.kannoju@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Use ordered WQ for G2H handler. (Matthew Brost)
- Use flexible-array rather than zero-sized (Lucas De Marchi)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRskUM7w1oG5rx2IZO4FpNVCsYGvwUCZjz6vwAKCRC4FpNVCsYG
vybvAP4tAOoYsRW35Vb6T7CYMvYVdrp7SywBsWbiFk+KtR6q9AEAhwTEG1Z1sH3e
9yIkcpfTo0O1ARxhN/EFsJQ+OtO4OQE=
=kdLI
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-next-fixes-2024-05-09-1' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
Driver Changes:
- Use ordered WQ for G2H handler. (Matthew Brost)
- Use flexible-array rather than zero-sized (Lucas De Marchi)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Zjz7SzCvfA3vQRxu@fedora
Updates for v6.10
Core:
- Switched to generating register header files during build process
instead of shipping pre-generated headers
- Merged DPU and MDP4 format databases.
DP:
- Stop using compat string to distinguish DP and eDP cases
- Added support for X Elite platform (X1E80100)
- Reworked DP aux/audio support
- Added SM6350 DP to the bindings (no driver changes, using SM8350
as a fallback compat)
GPU:
- a7xx perfcntr reg fixes
- MAINTAINERS updates
- a750 devcoredump support
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtpw6dNR9JBikFTQ=TCpt-9FeFW+SGjXWv+Jv3emm0Pbg@mail.gmail.com
- Move more from system wq to ordered private wq
- Do not ignore return for drmm_mutex_init
-----BEGIN PGP SIGNATURE-----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=iAzA
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-fixes-2024-05-09' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
- Fix use zero-length element array
- Move more from system wq to ordered private wq
- Do not ignore return for drmm_mutex_init
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c3rduifdp5wipkljdpuq4x6uowkc2uyzgdoft4txvp6mgvzjaj@7zw7c6uw4wrf
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_completion_timeout() causing patterns like:
timeout = wait_for_completion_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Check the return value directly to drop
'timeout' which also fixes its wrong type.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240507090200.7936-2-wsa+renesas@sang-engineering.com
[changed commit title to match driver name]
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
The MAINTAINERS file entry for the bcm2835-unicam driver incorrectly
references the non-existing drivers/media/platform/bcm2835/ path. Fix
it.
Fixes: 392cd78d49 ("media: bcm2835-unicam: Add support for CCP2/CSI2 camera interface")
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://lore.kernel.org/r/20240501115439.9789-1-laurent.pinchart@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The media_pad_remote_pad_unique() function returns error pointers, not
NULL. Update the check accordingly.
Fixes: 392cd78d49 ("media: bcm2835-unicam: Add support for CCP2/CSI2 camera interface")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/fbbe7862-2820-44eb-81cb-7f33b99cca35@moroto.mountain
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
platform_get_irq() already prints an error for us.
Fix this cocci warning:
drivers/media/platform/broadcom/bcm2835-unicam.c:2664:2-9: line 2664 is redundant because platform_get_irq() already prints an error
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20240506-fix-broad-v2-2-e6a2a5c0d609@chromium.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
