In its current form, the interrupt service routine of the tps25750
checks the event flags in the lowest 64 bits of the interrupt event
register (event[0]), but also in the upper part (event[1]).
Given that all flags are defined as BIT() or BIT_ULL(), they are
restricted to the first 64 bits of the INT_EVENT1 register. Including
the upper part of the register can lead to false positives e.g. if the
event 64 bits above the one being checked is set, but the one being
checked is not.
Restrict the flag checking to the first 64 bits of the INT_EVENT1
register.
Fixes: 7e7a3c815d ("USB: typec: tps6598x: Add TPS25750 support")
Cc: stable@vger.kernel.org
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Javier Carrasco <javier.carrasco@wolfvision.net>
Link: https://lore.kernel.org/r/20240429-tps6598x_fix_event_handling-v3-1-4e8e58dce489@wolfvision.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240508150406.1378672-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
of_gpio.h is deprecated and subject to remove.
The driver doesn't use it directly, replace it
with what is really being used.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240508113809.926155-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function ucsi_displayport_work() does not access the
connector, so it also must not acquire the connector lock.
This fixes a potential deadlock scenario:
ucsi_displayport_work() -> lock(&con->lock)
typec_altmode_vdm()
dp_altmode_vdm()
dp_altmode_work()
typec_altmode_enter()
ucsi_displayport_enter() -> lock(&con->lock)
Reported-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Fixes: af8622f6a5 ("usb: typec: ucsi: Support for DisplayPort alt mode")
Cc: stable@vger.kernel.org
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240507134316.161999-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If a probe function returns -EPROBE_DEFER after creating another device
there is a change of ending up in a probe deferral loop, (see commit
fbc35b45f9 ("Add documentation on meaning of -EPROBE_DEFER"). In case
of the qcom-pmic-typec driver the tcpm_register_port() function looks up
external resources (USB role switch and inherently via called
typec_register_port() USB-C muxes, switches and retimers).
In order to prevent such probe-defer loops caused by qcom-pmic-typec
driver, use the API added by Johan Hovold and move HPD bridge
registration to the end of the probe function.
The devm_drm_dp_hpd_bridge_add() is called at the end of the probe
function after all TCPM start functions. This is done as a way to
overcome a different problem, the DRM subsystem can not properly cope
with the DRM bridges being destroyed once the bridge is attached. Having
this function call at the end of the probe function prevents possible
DRM bridge device creation followed by destruction in case one of the
TCPM start functions returns an error.
Reported-by: Caleb Connolly <caleb.connolly@linaro.org>
Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240424-qc-pmic-typec-hpd-split-v4-1-f7e10d147443@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the unused list head 'buffers' and the
'struct free_record' which is also unused below it.
To me it looks like this has always been unused, but I've
not dug into why.
Build test only.
Signed-off-by: "Dr. David Alan Gilbert" <linux@treblig.org>
Link: https://lore.kernel.org/r/20240504150315.77598-1-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently all controller IP/revisions except DWC3_usb3 >= 310a
wait 1ms unconditionally for ENDXFER completion when IOC is not
set. This is because DWC_usb3 controller revisions >= 3.10a
supports GUCTL2[14: Rst_actbitlater] bit which allows polling
CMDACT bit to know whether ENDXFER command is completed.
Consider a case where an IN request was queued, and parallelly
soft_disconnect was called (due to ffs_epfile_release). This
eventually calls stop_active_transfer with IOC cleared, hence
send_gadget_ep_cmd() skips waiting for CMDACT cleared during
EndXfer. For DWC3 controllers with revisions >= 310a, we don't
forcefully wait for 1ms either, and we proceed by unmapping the
requests. If ENDXFER didn't complete by this time, it leads to
SMMU faults since the controller would still be accessing those
requests.
Fix this by ensuring ENDXFER completion by adding 1ms delay in
__dwc3_stop_active_transfer() unconditionally.
Cc: stable@vger.kernel.org
Fixes: b353eb6dc2 ("usb: dwc3: gadget: Skip waiting for CMDACT cleared during endxfer")
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20240502044103.1066350-1-quic_prashk@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This includes following USB4/Thunderbolt changes for the v6.10 merge
window:
- Enable NVM firmare upgrade on Intel Maple Ridge Thunderbolt 4
controller
- Improve USB3 tunnel bandwidth calculation
- Improve sideband access
- Minor cleanups and fixes.
All these have been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----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=fiCC
-----END PGP SIGNATURE-----
Merge tag 'thunderbolt-for-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next
Mika writes:
thunderbolt: Changes for v6.10 merge window
This includes following USB4/Thunderbolt changes for the v6.10 merge
window:
- Enable NVM firmare upgrade on Intel Maple Ridge Thunderbolt 4
controller
- Improve USB3 tunnel bandwidth calculation
- Improve sideband access
- Minor cleanups and fixes.
All these have been in linux-next with no reported issues.
* tag 'thunderbolt-for-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Correct trace output of firmware connection manager packets
thunderbolt: Fix kernel-doc for tb_tunnel_alloc_dp()
thunderbolt: Fix uninitialized variable in tb_tunnel_alloc_usb3()
thunderbolt: There are only 5 basic router registers in pre-USB4 routers
thunderbolt: No need to loop over all retimers if access fails
thunderbolt: Increase sideband access polling delay
thunderbolt: Get rid of TB_CFG_PKG_PREPARE_TO_SLEEP
thunderbolt: Use correct error code with ERROR_NOT_SUPPORTED
thunderbolt: Allow USB3 bandwidth to be lower than maximum supported
thunderbolt: Fix calculation of consumed USB3 bandwidth on a path
thunderbolt: Enable NVM upgrade support on Intel Maple Ridge
This reverts commit 9801b5b28c.
This patch introduced a potential deadlock scenario:
[Wed May 8 10:02:06 2024] Possible unsafe locking scenario:
[Wed May 8 10:02:06 2024] CPU0 CPU1
[Wed May 8 10:02:06 2024] ---- ----
[Wed May 8 10:02:06 2024] lock(vivid_ctrls:1620:(hdl_vid_cap)->_lock);
[Wed May 8 10:02:06 2024] lock(vivid_ctrls:1608:(hdl_user_vid)->_lock);
[Wed May 8 10:02:06 2024] lock(vivid_ctrls:1620:(hdl_vid_cap)->_lock);
[Wed May 8 10:02:06 2024] lock(vivid_ctrls:1608:(hdl_user_vid)->_lock);
For now just revert.
Fixes: 9801b5b28c ("media: v4l2-ctrls: show all owned controls in log_status")
Cc: stable@vger.kernel.org
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Before this commit on probe() the driver would do:
reset=1 // from probe() calling gpiod_get(GPIOD_OUT_HIGH)
reset=0 // from resume()
msleep(20) // from resume()
So if reset was 0 before getting the GPIO the reset line would only be
driven high for a very short time and sometimes there would be errors
reading the id register afterwards.
Add a msleep(20) after getting the reset line to ensure the sensor is
properly reset:
reset=1 // from probe() calling gpiod_get(GPIOD_OUT_HIGH)
msleep(20) // from probe()
reset=0 // from resume()
msleep(20) // from resume()
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Use dev_dbg() for printing messages on user-triggerable conditions that
have no relation to driver or hardware issues.
Fixes: 3c1dfb5a69 ("media: intel/ipu6: input system video nodes and buffer queues")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Set up sysfs for the Atmel SHA204a. Provide the content of the otp zone as
an attribute field on the sysfs entry. Thereby make sure that if the chip
is locked, not connected or trouble with the i2c bus, the sysfs device is
not set up. This is mostly already handled in atmel-i2c.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Provide a read function reading the otp zone. The otp zone can be used for
storing serial numbers. The otp zone, as also data zone, are only
accessible if the chip was locked before. Locking the chip is a post
production customization and has to be done manually i.e. not by this
driver. Without this step the chip is pretty much not usable, where
putting or not putting data into the otp zone is optional.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Make the memory read function name more specific to the read memory zone.
The Atmel SHA204 chips provide config, otp and data zone. The implemented
read function in fact only reads some fields in zone config. The function
renaming allows for a uniform naming scheme when reading from other memory
zones.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fixes the following two Coccinelle/coccicheck warnings reported by
memdup.cocci:
iaa_crypto_main.c:350:19-26: WARNING opportunity for kmemdup
iaa_crypto_main.c:358:18-25: WARNING opportunity for kmemdup
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_completion_timeout() causing patterns like:
timeout = wait_for_completion_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_completion_killable_timeout() causing patterns like:
timeout = wait_for_completion_killable_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
iMX8ULP have a secure-enclave hardware IP called EdgeLock Enclave(ELE),
that control access to caam controller's register page, i.e., page0.
At all, if the ELE release access to CAAM controller's register page,
it will release to secure-world only.
Clocks are turned on automatically for iMX8ULP. There exists the caam
clock gating bit, but it is not advised to gate the clock at linux, as
optee-os or any other entity might be using it.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
CAAM clock initializat is done based on the basis of soc specific
info stored in struct caam_imx_data:
- caam-page0-access flag
- num_clks
CAAM driver needs to be aware of access rights to CAAM control page
i.e., page0, to do things differently.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Dma address mapping fails on unaligned scatterlist offset. Use sw
fallback for these cases.
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
RSA text data uses variable length buffer allocated in software stack.
Calling kfree on it causes undefined behaviour in subsequent operations.
Cc: <stable@vger.kernel.org> #6.7+
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Skip sw fallback allocation if RSA module failed to get device handle.
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Skip dma setup and mapping for AES driver if plaintext is empty.
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Sven Auhagen reports transaction failures with following error:
./main.nft:13:1-26: Error: Could not process rule: Cannot allocate memory
percpu: allocation failed, size=16 align=8 atomic=1, atomic alloc failed, no space left
This points to failing pcpu allocation with GFP_ATOMIC flag.
However, transactions happen from user context and are allowed to sleep.
One case where we can call into percpu allocator with GFP_ATOMIC is
nft_counter expression.
Normally this happens from control plane, so this could use GFP_KERNEL
instead. But one use case, element insertion from packet path,
needs to use GFP_ATOMIC allocations (nft_dynset expression).
At this time, .clone callbacks always use GFP_ATOMIC for this reason.
Add gfp_t argument to the .clone function and pass GFP_KERNEL or
GFP_ATOMIC flag depending on context, this allows all clone memory
allocations to sleep for the normal (transaction) case.
Cc: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add a new test script that uses packetdrill tool to exercise conntrack
state machine.
Needs ip/ip6tables and conntrack tool (to check if we have an entry in
the expected state).
Test cases added here cover following scenarios:
1. already-acked (retransmitted) packets are not tagged as INVALID
2. RST packet coming when conntrack is already closing (FIN/CLOSE_WAIT)
transitions conntrack to CLOSE even if the RST is not an exact match
3. RST packets with out-of-window sequence numbers are marked as INVALID
4. SYN+Challenge ACK: check that challenge ack is allowed to pass
5. Old SYN/ACK: check conntrack handles the case where SYN is answered
with SYN/ACK for an old, previous connection attempt
6. Check SYN reception while in ESTABLISHED state generates a challenge
ack, RST response clears 'outdated' state + next SYN retransmit gets
us into 'SYN_RECV' conntrack state.
Tests get run twice, once with ipv4 and once with ipv6.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The following warning was reported by lee bruce:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 8264 at fs/fuse/dev.c:300
fuse_request_end+0x685/0x7e0 fs/fuse/dev.c:300
Modules linked in:
CPU: 0 PID: 8264 Comm: ab2 Not tainted 6.9.0-rc7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
RIP: 0010:fuse_request_end+0x685/0x7e0 fs/fuse/dev.c:300
......
Call Trace:
<TASK>
fuse_dev_do_read.constprop.0+0xd36/0x1dd0 fs/fuse/dev.c:1334
fuse_dev_read+0x166/0x200 fs/fuse/dev.c:1367
call_read_iter include/linux/fs.h:2104 [inline]
new_sync_read fs/read_write.c:395 [inline]
vfs_read+0x85b/0xba0 fs/read_write.c:476
ksys_read+0x12f/0x260 fs/read_write.c:619
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xce/0x260 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
......
</TASK>
The warning is due to the FUSE_NOTIFY_RESEND notify sent by the write()
syscall in the reproducer program and it happens as follows:
(1) calls fuse_dev_read() to read the INIT request
The read succeeds. During the read, bit FR_SENT will be set on the
request.
(2) calls fuse_dev_write() to send an USE_NOTIFY_RESEND notify
The resend notify will resend all processing requests, so the INIT
request is moved from processing list to pending list again.
(3) calls fuse_dev_read() with an invalid output address
fuse_dev_read() will try to copy the same INIT request to the output
address, but it will fail due to the invalid address, so the INIT
request is ended and triggers the warning in fuse_request_end().
Fix it by clearing FR_SENT when re-adding requests into pending list.
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Reported-by: xingwei lee <xrivendell7@gmail.com>
Reported-by: yue sun <samsun1006219@gmail.com>
Closes: https://lore.kernel.org/linux-fsdevel/58f13e47-4765-fce4-daf4-dffcc5ae2330@huaweicloud.com/T/#m091614e5ea2af403b259e7cea6a49e51b9ee07a7
Fixes: 760eac73f9 ("fuse: Introduce a new notification type for resend pending requests")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When fuse_resend() moves the requests from processing lists to pending
list, it uses __set_bit() to set FR_PENDING bit in req->flags.
Using __set_bit() is not safe, because other functions may update
req->flags concurrently (e.g., request_wait_answer() may call
set_bit(FR_INTERRUPTED, &flags)).
Fix it by using set_bit() instead.
Fixes: 760eac73f9 ("fuse: Introduce a new notification type for resend pending requests")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
commit c6f597bc59 ("ASoC: audio-graph-card2: remove unneeded
of_node_get()") removed of_node_get(), but it need to keep original
reference, so of_node_get() itself is needed.
Because of_get_next_child() will call of_node_put() inside, if the
reference count dropped to zero, then of_node_get() after that will be
use afer free. Need to call of_node_get() *before* that.
Fixes: c6f597bc59 ("ASoC: audio-graph-card2: remove unneeded of_node_get()")
Link: https://lore.kernel.org/r/f930862e-9d30-4ea3-b3e7-b4b4f411f6d1@moroto.mountain
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/875xvmqzs8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This set type keeps two copies of the sets' content,
priv->match (live version, used to match from packet path)
priv->clone (work-in-progress version of the 'future' priv->match).
All additions and removals are done on priv->clone. When transaction
completes, priv->clone becomes priv->match and a new clone is allocated
for use by next transaction.
Problem is that the cloning requires GFP_KERNEL allocations but we
cannot fail at either commit or abort time.
This patch defers the clone until we get an insertion or removal
request. This allows us to handle OOM situations correctly.
This also allows to remove ->dirty in a followup change:
If ->clone exists, ->dirty is always true
If ->clone is NULL, ->dirty is always false, no elements were added
or removed (except catchall elements which are external to the specific
set backend).
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The helper uses priv->clone unconditionally which will fail once we do
the clone conditionally on first insert or removal.
'nft get element' from userspace needs to use priv->match since this
runs from rcu read side lock section.
Prepare for this by passing the match backend data as argument.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
In IPv6, ipv6_rcv_core will parse the hop-by-hop type extension header and increase skb->transport_header by one extension header length.
But if there are more other extension headers like fragment header at this time, the skb->transport_header points to the second extension header,
not the transport layer header or the first extension header.
This will result in the start and nexthdrp variable not pointing to the same position in ipv6frag_thdr_trunced,
and ipv6_skip_exthdr returning incorrect offset and frag_off.Sometimes,the length of the last sharded packet is smaller than the calculated incorrect offset, resulting in packet loss.
We can use network header to offset and calculate the correct position to solve this problem.
Fixes: 9d9e937b1c (ipv6/netfilter: Discard first fragment not including all headers)
Signed-off-by: Gao Xingwang <gaoxingwang1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This isn't modified at runtime. Mark it const so it can move to
read-only data.
Cc: dann frazier <dann.frazier@canonical.com>
Cc: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240502233447.420888-1-swboyd@chromium.org
The Renesas OS Timer (OSTM) driver contains two probe points, of which
only one should complete:
1. Early probe, using TIMER_OF_DECLARE(), to provide the sole
clocksource on (arm32) RZ/A1 and RZ/A2 SoCs,
2. Normal probe, using a platform driver, to provide additional timers
on (arm64 + riscv) RZ/G2L and similar SoCs.
The latter is needed because using OSTM on RZ/G2L requires manipulation
of its reset signal, which is not yet available at the time of early
probe, causing early probe to fail with -EPROBE_DEFER. It is only
enabled when building a kernel with support for the RZ/G2L family, so it
does not impact RZ/A1 and RZ/A2. Hence only one probe method can
complete on all affected systems.
As relying on the order of initialization of subsystems inside the
kernel is fragile, set the DT node's OF_POPULATED flag after a succesful
early probe. This makes sure the platform driver's probe is never
called after a successful early probe.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviwed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/bd027379713cbaafa21ffe9e848ebb7f475ca0e7.1710930542.git.geert+renesas@glider.be
The RZ/V2H(P) (R9A09G057) SoC is equipped with the Generic Timer Module,
also known as OSTM. Similar to the RZ/G2L SoC, the OSTM on the RZ/V2H(P)
SoC requires the reset line to be deasserted before accessing any
registers.
Early call to ostm_init() happens through TIMER_OF_DECLARE() which always
fails with -EPROBE_DEFER, as resets are not available that early in the
boot process. To address this issue on the RZ/V2H(P) SoC, enable the OSTM
driver to be reprobed through the platform driver probe mechanism.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240322151219.885832-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Document the General Timer Module (a.k.a OSTM) block on Renesas RZ/V2H(P)
("R9A09G057") SoC, which is identical to the one found on the RZ/A1H and
RZ/G2L SoCs. Add the "renesas,r9a09g057-ostm" compatible string for the
RZ/V2H(P) SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240322151219.885832-2-prabhakar.mahadev-lad.rj@bp.renesas.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmY39LkeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGaB8H+wWcwT1O7K2SQx1a
sHDYJSXfbjgShS7Wt+gbDNvhGJqG/5FkpHyBmBKUdElZs8QMf21GAbIfJvzcNThA
g+FakIMjfhNH/dr6TJXHWbb2NZV67exDbbuaQDyMhNhIZqil4BH/OEPbLYIdquvm
/HDGFB/whVoHVC+Ug8esEOL3Uy+rizBDlsT/K4ZgpOC3TuUmlRpptSVACwjcCGXM
PFKyyTIr0ZnKcz3+4yTEtpDFm6e/ujxMwM66GBCgmPaZ3lJp5ruY3kGpBTmSyoqV
Rh3CQlIhBo8gwlAx/yQXfxEZomhxT6DfRpc6s/1W0J1UZN/j2pYy056OYyckG32c
uQ9ujxQ=
=M0wP
-----END PGP SIGNATURE-----
Merge 6.9-rc7 into usb-next
We want the USB fixes in here as well, and resolve a merge conflict in
drivers/usb/dwc3/core.c
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
