We just need to use the holder to indicate whether a block device open
was exclusive or not. We did use to do that before but had to give that
up once we switched to struct bdev_handle. Before struct bdev_handle we
only stashed stuff in file->private_data if this was an exclusive open
but after struct bdev_handle we always set file->private_data to a
struct bdev_handle and so we had to use bdev_handle->mode or
bdev_handle->holder. Now that we don't use struct bdev_handle anymore we
can revert back to the old behavior.
Link: https://lore.kernel.org/r/20240123-vfs-bdev-file-v2-32-adbd023e19cc@kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Make it possible to detected a block device that was opened with
restricted write access based only on BLK_OPEN_WRITE and
bdev->bd_writers < 0 so we won't have to claim another FMODE_* flag.
Link: https://lore.kernel.org/r/20240123-vfs-bdev-file-v2-31-adbd023e19cc@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
We can always go directly via:
* I_BDEV(bdev_file->f_inode)
* I_BDEV(bdev_file->f_mapping->host)
So keeping struct bdev in struct bdev_handle is redundant.
Link: https://lore.kernel.org/r/20240123-vfs-bdev-file-v2-30-adbd023e19cc@kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Move both of them to the private block header. There's no caller in the
tree anymore that uses them directly.
Link: https://lore.kernel.org/r/20240123-vfs-bdev-file-v2-28-adbd023e19cc@kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
This may run from a kernel thread via device_add_disk(). So this could
also use __fput_sync() if we were worried about EBUSY. But when it is
called from a kernel thread it's always BLK_OPEN_READ so EBUSY can't
really happen even if we do BLK_OPEN_RESTRICT_WRITES or BLK_OPEN_EXCL.
Otherwise it's called from an ioctl on the block device which is only
called from userspace and can rely on task work.
Link: https://lore.kernel.org/r/20240123-vfs-bdev-file-v2-3-adbd023e19cc@kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add two new helpers to allow opening block devices as files.
This is not the final infrastructure. This still opens the block device
before opening a struct a file. Until we have removed all references to
struct bdev_handle we can't switch the order:
* Introduce blk_to_file_flags() to translate from block specific to
flags usable to pen a new file.
* Introduce bdev_file_open_by_{dev,path}().
* Introduce temporary sb_bdev_handle() helper to retrieve a struct
bdev_handle from a block device file and update places that directly
reference struct bdev_handle to rely on it.
* Don't count block device openes against the number of open files. A
bdev_file_open_by_{dev,path}() file is never installed into any
file descriptor table.
One idea that came to mind was to use kernel_tmpfile_open() which
would require us to pass a path and it would then call do_dentry_open()
going through the regular fops->open::blkdev_open() path. But then we're
back to the problem of routing block specific flags such as
BLK_OPEN_RESTRICT_WRITES through the open path and would have to waste
FMODE_* flags every time we add a new one. With this we can avoid using
a flag bit and we have more leeway in how we open block devices from
bdev_open_by_{dev,path}().
Link: https://lore.kernel.org/r/20240123-vfs-bdev-file-v2-1-adbd023e19cc@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
In order to add a helper to open files that aren't accounted split
alloc_file() and parts of alloc_file_pseudo() into helpers. One to
prepare a path, another one to setup the file.
Suggested-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240129160241.GA2793@lst.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
Obtain the PMU regmap using the new API added to exynos-pmu driver rather
than syscon_regmap_lookup_by_phandle(). As this driver no longer depends
on mfd syscon remove that header and Kconfig dependency.
Tested-by: Alexey Klimov <alexey.klimov@linaro.org>
Tested-by: Sam Protsenko <semen.protsenko@linaro.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20240220220613.797068-3-peter.griffin@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Some Exynos based SoCs like Tensor gs101 protect the PMU registers for
security hardening reasons so that they are only write accessible in el3
via an SMC call.
As most Exynos drivers that need to write PMU registers currently obtain a
regmap via syscon (phys, pinctrl, watchdog). Support for the above usecase
is implemented in this driver using a custom regmap similar to syscon to
handle the SMC call. Platforms that don't secure PMU registers, get a mmio
regmap like before. As regmaps abstract out the underlying register access
changes to the leaf drivers are minimal.
A new API exynos_get_pmu_regmap_by_phandle() is provided for leaf drivers
that currently use syscon_regmap_lookup_by_phandle(). This also handles
deferred probing.
Tested-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20240220220613.797068-2-peter.griffin@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
GCC recently added option -fmin-function-alignment, which should appear
in GCC 14. Unlike -falign-functions, this option causes all functions to
be aligned at the specified value, including the cold ones.
In particular, when an arm64 kernel is built with
DYNAMIC_FTRACE_WITH_CALL_OPS=y, the 8-byte function alignment is
required for correct functionality. This was done by -falign-functions=8
and having workarounds in the kernel to force the compiler to follow
this alignment. The new -fmin-function-alignment option directly
guarantees it.
Detect availability of -fmin-function-alignment and use it instead of
-falign-functions when present. Introduce CC_HAS_SANE_FUNCTION_ALIGNMENT
and enable __cold to work as expected when it is set.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The 'duplicates' bool argument is always true when efivar_init() is
called from its only caller so let's just drop it instead.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Al points out that kill_sb() will be called if efivarfs_fill_super()
fails and so there is no point in cleaning up the efivar entry list.
Reported-by: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Work around a quirk in a few old (2011-ish) UEFI implementations, where
a call to `GetNextVariableName` with a buffer size larger than 512 bytes
will always return EFI_INVALID_PARAMETER.
There is some lore around EFI variable names being up to 1024 bytes in
size, but this has no basis in the UEFI specification, and the upper
bounds are typically platform specific, and apply to the entire variable
(name plus payload).
Given that Linux does not permit creating files with names longer than
NAME_MAX (255) bytes, 512 bytes (== 256 UTF-16 characters) is a
reasonable limit.
Cc: <stable@vger.kernel.org> # 6.1+
Signed-off-by: Tim Schumacher <timschumi@gmx.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
1) errors from ext4_getblk() should not be propagated to caller
unless we are really sure that we would've gotten the same error
in non-RCU pathwalk.
2) we leak buffer_heads if ext4_getblk() is successful, but bh is
not uptodate.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
->d_revalidate() bails out there, anyway. It's not enough
to prevent getting into ->get_link() in RCU mode, but that
could happen only in a very contrieved setup. Not worth
trying to do anything fancy here unless ->d_revalidate()
stops kicking out of RCU mode at least in some cases.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
->permission(), ->get_link() and ->inode_get_acl() might dereference
->s_fs_info (and, in case of ->permission(), ->s_fs_info->fc->user_ns
as well) when called from rcu pathwalk.
Freeing ->s_fs_info->fc is rcu-delayed; we need to make freeing ->s_fs_info
and dropping ->user_ns rcu-delayed too.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
makes proc_pid_ns() safe from rcu pathwalk (put_pid_ns()
is still synchronous, but that's not a problem - it does
rcu-delay everything that needs to be)
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
that keeps both around until struct inode is freed, making access
to them safe from rcu-pathwalk
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
NFS ->d_revalidate(), ->permission() and ->get_link() need to access
some parts of nfs_server when called in RCU mode:
server->flags
server->caps
*(server->io_stats)
and, worst of all, call
server->nfs_client->rpc_ops->have_delegation
(the last one - as NFS_PROTO(inode)->have_delegation()). We really
don't want to RCU-delay the entire nfs_free_server() (it would have
to be done with schedule_work() from RCU callback, since it can't
be made to run from interrupt context), but actual freeing of
nfs_server and ->io_stats can be done via call_rcu() just fine.
nfs_client part is handled simply by making nfs_free_client() use
kfree_rcu().
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
nfs_set_verifier() relies upon dentry being pinned; if that's
the case, grabbing ->d_lock stabilizes ->d_parent and guarantees
that ->d_parent points to a positive dentry. For something
we'd run into in RCU mode that is *not* true - dentry might've
been through dentry_kill() just as we grabbed ->d_lock, with
its parent going through the same just as we get to into
nfs_set_verifier_locked(). It might get to detaching inode
(and zeroing ->d_inode) before nfs_set_verifier_locked() gets
to fetching that; we get an oops as the result.
That can happen in nfs{,4} ->d_revalidate(); the call chain in
question is nfs_set_verifier_locked() <- nfs_set_verifier() <-
nfs_lookup_revalidate_delegated() <- nfs{,4}_do_lookup_revalidate().
We have checked that the parent had been positive, but that's
done before we get to nfs_set_verifier() and it's possible for
memory pressure to pick our dentry as eviction candidate by that
time. If that happens, back-to-back attempts to kill dentry and
its parent are quite normal. Sure, in case of eviction we'll
fail the ->d_seq check in the caller, but we need to survive
until we return there...
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
In __afs_break_callback() we might check ->cb_nr_mmap and if it's non-zero
do queue_work(&vnode->cb_work). In afs_drop_open_mmap() we decrement
->cb_nr_mmap and do flush_work(&vnode->cb_work) if it reaches zero.
The trouble is, there's nothing to prevent __afs_break_callback() from
seeing ->cb_nr_mmap before the decrement and do queue_work() after both
the decrement and flush_work(). If that happens, we might be in trouble -
vnode might get freed before the queued work runs.
__afs_break_callback() is always done under ->cb_lock, so let's make
sure that ->cb_nr_mmap can change from non-zero to zero while holding
->cb_lock (the spinlock component of it - it's a seqlock and we don't
need to mess with the counter).
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
->d_hash() and ->d_compare() use those, so we need to delay freeing
them.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>