That stuff can be accessed by ->d_hash()/->d_compare(); as it is, we have
a hard-to-hit UAF if rcu pathwalk manages to get into ->d_hash() on a filesystem
that is in process of getting shut down.
Besides, having nls and upcase table cleanup moved from ->put_super() towards
the place where sbi is freed makes for simpler failure exits.
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
one of the flags in it is used by ->d_hash()/->d_compare()
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
If lazy call of ->permission() returns a hard error, check that
try_to_unlazy() succeeds before returning it. That both makes
life easier for ->permission() instances and closes the race
in ENOTDIR handling - it is possible that positive d_can_lookup()
seen in link_path_walk() applies to the state *after* unlink() +
mkdir(), while nd->inode matches the state prior to that.
Normally seeing e.g. EACCES from permission check in rcu pathwalk
means that with some timings non-rcu pathwalk would've run into
the same; however, running into a non-executable regular file
in the middle of a pathname would not get to permission check -
it would fail with ENOTDIR instead.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Avoids fun races in RCU pathwalk... Same goes for freeing LSM shite
hanging off super_block's arse.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Since commit 8208181fe5 ("clk: imx: composite-8m:
Add imx8m_divider_determine_rate") the lcdif controller has
had the ability to set the disp_pixel_clk rate which propagates
up the tree and sets the video_pll rate automatically.
As such, there is no need to define it in the board file.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Since commit 8208181fe5 ("clk: imx: composite-8m:
Add imx8m_divider_determine_rate") the lcdif controller has
had the ability to set the disp_pixel_clk rate which propagates
up the tree and sets the video_pll rate automatically.
By setting this value low, it will force the recalculation of
video_pll to the lowest rate needed by lcdif instead of
dividing a larger clock down to the desired clock speed. This
has the advantage of being able to lower the video_pll rate
from 594MHz to 148.5MHz when operating at 1080p. It can go even
lower when operating at lower resolutions and refresh rates.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The imx8mp-beacon SOM has an integrated PHY connected to
the EQOS ethernet controller which can support up to five
queues. Configure these queues in the same manor as done
on the imx8mp-evk.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The imx8mp-beacon SOM has wireless chip supporting Wi-Fi and
Bluetooth shared. The Wi-Fi is already enabled via the SDIO
interface, so enable the Bluetooth via UART1.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
check_snapshot() copies the bch_snapshot to a temporary to easily handle
older versions that don't have all the fields of the current version,
but it lacked a min() to correctly handle keys newer and larger than the
current version.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
If a journal write errored, the list of devices it was written to could
be empty - we're not supposed to mark an empty replicas list.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bch2_direct_IO_read() checks the request offset and size for sector
alignment and then falls through to a couple calculations to shrink
the size of the request based on the inode size. The problem is that
these checks round up to the fs block size, which runs the risk of
underflowing iter->count if the block size happens to be large
enough. This is triggered by fstest generic/361 with a 4k block
size, which subsequently leads to a crash. To avoid this crash,
check that the shorten length doesn't exceed the overall length of
the iter.
Fixes:
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Su Yue <glass.su@suse.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
If we're in FILTER_SNAPSHOTS mode and we start scanning a range of the
keyspace where no keys are visible in the current snapshot, we have a
problem - we'll scan for a very long time before scanning terminates.
Awhile back, this was fixed for most cases with peek_upto() (and
assertions that enforce that it's being used).
But the fix missed the fact that the inodes btree is different - every
key offset is in a different snapshot tree, not just the inode field.
Fixes:
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Recently, we fixed our __GFP_NOFAIL usage in the readahead path, but the
easy one in read_single_folio() (where wa can return an error) was
missed - oops.
Fixes:
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
- Fix a crash when hot adding a PCI device to an LPAR since recent changes.
- Fix nested KVM level-2 guest reboot failure due to empty 'arch_compat'.
Thanks to: Amit Machhiwal, Aneesh Kumar K.V (IBM), Brian King, Gaurav Batra,
Vaibhav Jain.
-----BEGIN PGP SIGNATURE-----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=+tcX
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix a crash when hot adding a PCI device to an LPAR since
recent changes
- Fix nested KVM level-2 guest reboot failure due to empty
'arch_compat'
Thanks to Amit Machhiwal, Aneesh Kumar K.V (IBM), Brian King, Gaurav
Batra, and Vaibhav Jain.
* tag 'powerpc-6.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
KVM: PPC: Book3S HV: Fix L2 guest reboot failure due to empty 'arch_compat'
powerpc/pseries/iommu: DLPAR add doesn't completely initialize pci_controller
Including:
- Intel VT-d fixes for nested domain handling:
- Cache invalidation for changes in a parent domain
- Dirty tracking setting for parent and nested domains
- Fix a constant-out-of-range warning
- ARM SMMU fixes:
- Fix CD allocation from atomic context when using SVA with SMMUv3
- Revert the conversion of SMMUv2 to domain_alloc_paging(), as it
breaks the boot for Qualcomm MSM8996 devices
- Restore SVA handle sharing in core code as it turned out there are
still drivers relying on it
-----BEGIN PGP SIGNATURE-----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=aVOB
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Intel VT-d fixes for nested domain handling:
- Cache invalidation for changes in a parent domain
- Dirty tracking setting for parent and nested domains
- Fix a constant-out-of-range warning
- ARM SMMU fixes:
- Fix CD allocation from atomic context when using SVA with SMMUv3
- Revert the conversion of SMMUv2 to domain_alloc_paging(), as it
breaks the boot for Qualcomm MSM8996 devices
- Restore SVA handle sharing in core code as it turned out there are
still drivers relying on it
* tag 'iommu-fixes-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/sva: Restore SVA handle sharing
iommu/arm-smmu-v3: Do not use GFP_KERNEL under as spinlock
iommu/vt-d: Fix constant-out-of-range warning
iommu/vt-d: Set SSADE when attaching to a parent with dirty tracking
iommu/vt-d: Add missing dirty tracking set for parent domain
iommu/vt-d: Wrap the dirty tracking loop to be a helper
iommu/vt-d: Remove domain parameter for intel_pasid_setup_dirty_tracking()
iommu/vt-d: Add missing device iotlb flush for parent domain
iommu/vt-d: Update iotlb in nested domain attach
iommu/vt-d: Add missing iotlb flush for parent domain
iommu/vt-d: Add __iommu_flush_iotlb_psi()
iommu/vt-d: Track nested domains in parent
Revert "iommu/arm-smmu: Convert to domain_alloc_paging()"
- Fix NUMA initialization from ACPI CEDT.CFMWS
- Fix region assembly failures due to async init order
- Fix / simplify export of qos_class information
- Fix cxl_acpi initialization vs single-window-init failures
- Fix handling of repeated 'pci_channel_io_frozen' notifications
- Workaround platforms that violate host-physical-address ==
system-physical address assumptions
- Defer CXL CPER notification handling to v6.9
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCZdpH9gAKCRDfioYZHlFs
ZwZlAQDE+PxTJnjCXDVnDylVF4yeJF2G/wSkH1CFVFVxa0OjhAD/ZFScS/nz/76l
1IYYiiLqmVO5DdmJtfKtq16m7e1cZwc=
=PuPF
-----END PGP SIGNATURE-----
Merge tag 'cxl-fixes-6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fixes from Dan Williams:
"A collection of significant fixes for the CXL subsystem.
The largest change in this set, that bordered on "new development", is
the fix for the fact that the location of the new qos_class attribute
did not match the Documentation. The fix ends up deleting more code
than it added, and it has a new unit test to backstop basic errors in
this interface going forward. So the "red-diff" and unit test saved
the "rip it out and try again" response.
In contrast, the new notification path for firmware reported CXL
errors (CXL CPER notifications) has a locking context bug that can not
be fixed with a red-diff. Given where the release cycle stands, it is
not comfortable to squeeze in that fix in these waning days. So, that
receives the "back it out and try again later" treatment.
There is a regression fix in the code that establishes memory NUMA
nodes for platform CXL regions. That has an ack from x86 folks. There
are a couple more fixups for Linux to understand (reassemble) CXL
regions instantiated by platform firmware. The policy around platforms
that do not match host-physical-address with system-physical-address
(i.e. systems that have an address translation mechanism between the
address range reported in the ACPI CEDT.CFMWS and endpoint decoders)
has been softened to abort driver load rather than teardown the memory
range (can cause system hangs). Lastly, there is a robustness /
regression fix for cases where the driver would previously continue in
the face of error, and a fixup for PCI error notification handling.
Summary:
- Fix NUMA initialization from ACPI CEDT.CFMWS
- Fix region assembly failures due to async init order
- Fix / simplify export of qos_class information
- Fix cxl_acpi initialization vs single-window-init failures
- Fix handling of repeated 'pci_channel_io_frozen' notifications
- Workaround platforms that violate host-physical-address ==
system-physical address assumptions
- Defer CXL CPER notification handling to v6.9"
* tag 'cxl-fixes-6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/acpi: Fix load failures due to single window creation failure
acpi/ghes: Remove CXL CPER notifications
cxl/pci: Fix disabling memory if DVSEC CXL Range does not match a CFMWS window
cxl/test: Add support for qos_class checking
cxl: Fix sysfs export of qos_class for memdev
cxl: Remove unnecessary type cast in cxl_qos_class_verify()
cxl: Change 'struct cxl_memdev_state' *_perf_list to single 'struct cxl_dpa_perf'
cxl/region: Allow out of order assembly of autodiscovered regions
cxl/region: Handle endpoint decoders in cxl_region_find_decoder()
x86/numa: Fix the sort compare func used in numa_fill_memblks()
x86/numa: Fix the address overlap check in numa_fill_memblks()
cxl/pci: Skip to handle RAS errors if CXL.mem device is detached
The SLAB_MEM_SPREAD flag is already a no-op as of 6.8-rc1, remove
its usage so we can delete it from slab. No functional change.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Link: https://lore.kernel.org/r/20240224134646.829105-1-chengming.zhou@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The logic in blk_mq_complete_need_ipi() assumes SMP systems where all
CPUs have equal compute capacities and only LLC cache can make
a different on perceived performance. But this assumption falls apart on
HMP systems where LLC is shared, but the CPUs have different capacities.
Staying local then can have a big performance impact if the IO request
was done from a CPU with higher capacity but the interrupt is serviced
on a lower capacity CPU.
Use the new cpus_equal_capacity() function to check if we need to send
an IPI.
Without the patch I see the BLOCK softirq always running on little cores
(where the hardirq is serviced). With it I can see it running on all
cores.
This was noticed after the topology change [1] where now on a big.LITTLE
we truly get that the LLC is shared between all cores where as in the
past it was being misrepresented for historical reasons. The logic
exposed a missing dependency on capacities for such systems where there
can be a big performance difference between the CPUs.
This of course introduced a noticeable change in behavior depending on
how the topology is presented. Leading to regressions in some workloads
as the performance of the BLOCK softirq on littles can be noticeably
worse on some platforms.
Worth noting that we could have checked for capacities being greater
than or equal instead for equality. This will lead to favouring higher
performance always. But opted for equality instead to match the
performance of the requester without making an assumption that can lead
to power trade-offs which these systems tend to be sensitive about. If
the requester would like to run faster, it's better to rely on the
scheduler to give the IO requester via some facility to run on a faster
core; and then if the interrupt triggered on a CPU with different
capacity we'll make sure to match the performance the requester is
supposed to run at.
[1] https://lpc.events/event/16/contributions/1342/attachments/962/1883/LPC-2022-Android-MC-Phantom-Domains.pdf
Signed-off-by: Qais Yousef <qyousef@layalina.io>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240223155749.2958009-3-qyousef@layalina.io
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The new helper function is needed to help blk-mq check if it needs to
dispatch the softirq on another CPU to match the performance level the
IO requester is running at. This is important on HMP systems where not
all CPUs have the same compute capacity.
Signed-off-by: Qais Yousef <qyousef@layalina.io>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240223155749.2958009-2-qyousef@layalina.io
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Some of these block operations can access a significant capacity and
take longer than the user expected. A user may change their mind about
wanting to run that command and attempt to kill the process and do
something else with their device. But since the task is uninterruptable,
they have to wait for it to finish, which could be many hours.
Check for a fatal signal at each iteration so the user doesn't have to
wait for their regretted operation to complete naturally.
Reported-by: Conrad Meyer <conradmeyer@meta.com>
Tested-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20240223155910.3622666-5-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is the same in two places, and another will be added soon. Create a
helper for it.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20240223155910.3622666-4-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use min to calculate the next number of sectors like everyone else.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20240223155910.3622666-3-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use consistent coding style in this file. All the other loops for the
same purpose use "while (nr_sects)", so they win.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20240223155910.3622666-2-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The VM_ALLOW_ANY_UNCACHED flag is implemented for ARM64,
allowing KVM stage 2 device mapping attributes to use Normal-NC
rather than DEVICE_nGnRE, which allows guest mappings supporting
write-combining attributes (WC). ARM does not architecturally
guarantee this is safe, and indeed some MMIO regions like the GICv2
VCPU interface can trigger uncontained faults if Normal-NC is used.
To safely use VFIO in KVM the platform must guarantee full safety
in the guest where no action taken against a MMIO mapping can
trigger an uncontained failure. The expectation is that most VFIO PCI
platforms support this for both mapping types, at least in common
flows, based on some expectations of how PCI IP is integrated. So
make vfio-pci set the VM_ALLOW_ANY_UNCACHED flag.
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Ankit Agrawal <ankita@nvidia.com>
Link: https://lore.kernel.org/r/20240224150546.368-5-ankita@nvidia.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
To provide VM with the ability to get device IO memory with NormalNC
property, map device MMIO in KVM for ARM64 at stage2 as NormalNC.
Having NormalNC S2 default puts guests in control (based on [1],
"Combining stage 1 and stage 2 memory type attributes") of device
MMIO regions memory mappings. The rules are summarized below:
([(S1) - stage1], [(S2) - stage 2])
S1 | S2 | Result
NORMAL-WB | NORMAL-NC | NORMAL-NC
NORMAL-WT | NORMAL-NC | NORMAL-NC
NORMAL-NC | NORMAL-NC | NORMAL-NC
DEVICE<attr> | NORMAL-NC | DEVICE<attr>
Still this cannot be generalized to non PCI devices such as GICv2.
There is insufficient information and uncertainity in the behavior
of non PCI driver. A driver must indicate support using the
new flag VM_ALLOW_ANY_UNCACHED.
Adapt KVM to make use of the flag VM_ALLOW_ANY_UNCACHED as indicator to
activate the S2 setting to NormalNc.
[1] section D8.5.5 of DDI0487J_a_a-profile_architecture_reference_manual.pdf
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Ankit Agrawal <ankita@nvidia.com>
Link: https://lore.kernel.org/r/20240224150546.368-4-ankita@nvidia.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
The VM_ALLOW_ANY_UNCACHED flag is implemented for ARM64, allowing KVM
stage 2 device mapping attributes to use NormalNC rather than
DEVICE_nGnRE, which allows guest mappings supporting write-combining
attributes (WC). ARM does not architecturally guarantee this is safe,
and indeed some MMIO regions like the GICv2 VCPU interface can trigger
uncontained faults if NormalNC is used.
Even worse, the expectation is that there are platforms where even
DEVICE_nGnRE can allow uncontained faults in corner cases. Unfortunately
existing ARM IP requires platform integration to take responsibility to
prevent this.
To safely use VFIO in KVM the platform must guarantee full safety in the
guest where no action taken against a MMIO mapping can trigger an
uncontained failure. The assumption is that most VFIO PCI platforms
support this for both mapping types, at least in common flows, based
on some expectations of how PCI IP is integrated. This can be enabled
more broadly, for instance into vfio-platform drivers, but only after
the platform vendor completes auditing for safety.
The VMA flag VM_ALLOW_ANY_UNCACHED was found to be the simplest and
cleanest way to communicate the information from VFIO to KVM that
mapping the region in S2 as NormalNC is safe. KVM consumes it to
activate the code that does the S2 mapping as NormalNC.
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Ankit Agrawal <ankita@nvidia.com>
Link: https://lore.kernel.org/r/20240224150546.368-3-ankita@nvidia.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Currently, KVM for ARM64 maps at stage 2 memory that is considered device
(i.e. it is not RAM) with DEVICE_nGnRE memory attributes; this setting
overrides (as per the ARM architecture [1]) any device MMIO mapping
present at stage 1, resulting in a set-up whereby a guest operating
system cannot determine device MMIO mapping memory attributes on its
own but it is always overridden by the KVM stage 2 default.
This set-up does not allow guest operating systems to select device
memory attributes independently from KVM stage-2 mappings
(refer to [1], "Combining stage 1 and stage 2 memory type attributes"),
which turns out to be an issue in that guest operating systems
(e.g. Linux) may request to map devices MMIO regions with memory
attributes that guarantee better performance (e.g. gathering
attribute - that for some devices can generate larger PCIe memory
writes TLPs) and specific operations (e.g. unaligned transactions)
such as the NormalNC memory type.
The default device stage 2 mapping was chosen in KVM for ARM64 since
it was considered safer (i.e. it would not allow guests to trigger
uncontained failures ultimately crashing the machine) but this
turned out to be asynchronous (SError) defeating the purpose.
Failures containability is a property of the platform and is independent
from the memory type used for MMIO device memory mappings.
Actually, DEVICE_nGnRE memory type is even more problematic than
Normal-NC memory type in terms of faults containability in that e.g.
aborts triggered on DEVICE_nGnRE loads cannot be made, architecturally,
synchronous (i.e. that would imply that the processor should issue at
most 1 load transaction at a time - it cannot pipeline them - otherwise
the synchronous abort semantics would break the no-speculation attribute
attached to DEVICE_XXX memory).
This means that regardless of the combined stage1+stage2 mappings a
platform is safe if and only if device transactions cannot trigger
uncontained failures and that in turn relies on platform capabilities
and the device type being assigned (i.e. PCIe AER/DPC error containment
and RAS architecture[3]); therefore the default KVM device stage 2
memory attributes play no role in making device assignment safer
for a given platform (if the platform design adheres to design
guidelines outlined in [3]) and therefore can be relaxed.
For all these reasons, relax the KVM stage 2 device memory attributes
from DEVICE_nGnRE to Normal-NC.
The NormalNC was chosen over a different Normal memory type default
at stage-2 (e.g. Normal Write-through) to avoid cache allocation/snooping.
Relaxing S2 KVM device MMIO mappings to Normal-NC is not expected to
trigger any issue on guest device reclaim use cases either (i.e. device
MMIO unmap followed by a device reset) at least for PCIe devices, in that
in PCIe a device reset is architected and carried out through PCI config
space transactions that are naturally ordered with respect to MMIO
transactions according to the PCI ordering rules.
Having Normal-NC S2 default puts guests in control (thanks to
stage1+stage2 combined memory attributes rules [1]) of device MMIO
regions memory mappings, according to the rules described in [1]
and summarized here ([(S1) - stage1], [(S2) - stage 2]):
S1 | S2 | Result
NORMAL-WB | NORMAL-NC | NORMAL-NC
NORMAL-WT | NORMAL-NC | NORMAL-NC
NORMAL-NC | NORMAL-NC | NORMAL-NC
DEVICE<attr> | NORMAL-NC | DEVICE<attr>
It is worth noting that currently, to map devices MMIO space to user
space in a device pass-through use case the VFIO framework applies memory
attributes derived from pgprot_noncached() settings applied to VMAs, which
result in device-nGnRnE memory attributes for the stage-1 VMM mappings.
This means that a userspace mapping for device MMIO space carried
out with the current VFIO framework and a guest OS mapping for the same
MMIO space may result in a mismatched alias as described in [2].
Defaulting KVM device stage-2 mappings to Normal-NC attributes does not
change anything in this respect, in that the mismatched aliases would
only affect (refer to [2] for a detailed explanation) ordering between
the userspace and GuestOS mappings resulting stream of transactions
(i.e. it does not cause loss of property for either stream of
transactions on its own), which is harmless given that the userspace
and GuestOS access to the device is carried out through independent
transactions streams.
A Normal-NC flag is not present today. So add a new kvm_pgtable_prot
(KVM_PGTABLE_PROT_NORMAL_NC) flag for it, along with its
corresponding PTE value 0x5 (0b101) determined from [1].
Lastly, adapt the stage2 PTE property setter function
(stage2_set_prot_attr) to handle the NormalNC attribute.
The entire discussion leading to this patch series may be followed through
the following links.
Link: https://lore.kernel.org/all/20230907181459.18145-3-ankita@nvidia.com
Link: https://lore.kernel.org/r/20231205033015.10044-1-ankita@nvidia.com
[1] section D8.5.5 - DDI0487J_a_a-profile_architecture_reference_manual.pdf
[2] section B2.8 - DDI0487J_a_a-profile_architecture_reference_manual.pdf
[3] sections 1.7.7.3/1.8.5.2/appendix C - DEN0029H_SBSA_7.1.pdf
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Ankit Agrawal <ankita@nvidia.com>
Link: https://lore.kernel.org/r/20240224150546.368-2-ankita@nvidia.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
According to the datasheet of BMP38x and BMP390 devices, for an SPI
read operation the first byte that is returned needs to be dropped,
and the rest of the bytes are the actual data returned from the
sensor.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fixes: 8d32930918 ("iio: pressure: bmp280: Add support for BMP380 sensor family")
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Acked-by: Angel Iglesias <ang.iglesiasg@gmail.com>
Link: https://lore.kernel.org/r/20240219191359.18367-1-vassilisamir@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
they recheck in the error path.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAmXaEswACgkQxSPxCi2d
A1oT2Qf/c1opgjRUe+yY/v7nWf4paufSj2O4LYAy/qQBU7IS9CcXQPzi/pKlfEo8
60OZfa5gfrCAla79se7hHI/mxReq7CI5nFvYDyqQ1JZQ/djG/4cN/oWf5fQ12pon
/ET1IzaZ+Mom+5wDBeQBLoQwXTA1ru5Bi1OiUe9Ed3wzadZQQks5s65fPnc0emGJ
ClyaXiiCt4Dy36E5GmuPpmPB4ZJ57SwcnFWDFIeCHEbIQk36APkZ22z7lqGObjw2
ANO1l59k6ojzmaXLi9pw/J/o/qyfNR0MpeI7SpmtJzhSZKeGKsUX2GlJ9QBhViJp
XL/+7MbSRJ43IY1lomoHZm1vxe0aPg==
=sQPX
-----END PGP SIGNATURE-----
Merge tag 'for-6.8/dm-fix-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fix from Mike Snitzer:
- Fix DM integrity and verity targets to not use excessive stack when
they recheck in the error path.
* tag 'for-6.8/dm-fix-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm-integrity, dm-verity: reduce stack usage for recheck
Six fixes: the four driver ones are pretty trivial. The larger two
core changes are to try to fix various USB attached devices which have
somewhat eccentric ways of handling the VPD and other mode pages which
necessitate multiple revalidates (that were removed in the interests
of efficiency) and updating the heuristic for supported VPD pages.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZdkyyyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishS2KAP0V8RVm
U1gUoE4doIV9WdK8Dv0MUxnOpYVvjhRjM8PA1QEAwaPJivC91smxJv4MOIDq0PL3
9qyMwQq4jWH/2zS14p8=
=8aq+
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Six fixes: the four driver ones are pretty trivial.
The larger two core changes are to try to fix various USB attached
devices which have somewhat eccentric ways of handling the VPD and
other mode pages which necessitate multiple revalidates (that were
removed in the interests of efficiency) and updating the heuristic for
supported VPD pages"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: jazz_esp: Only build if SCSI core is builtin
scsi: smartpqi: Fix disable_managed_interrupts
scsi: ufs: Uninitialized variable in ufshcd_devfreq_target()
scsi: target: pscsi: Fix bio_put() for error case
scsi: core: Consult supported VPD page list prior to fetching page
scsi: sd: usb_storage: uas: Access media prior to querying device properties
-----BEGIN PGP SIGNATURE-----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=QxF6
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
"A bugfix for host drivers"
* tag 'i2c-for-6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: imx: when being a target, mark the last read as processed
This is no-op.
FRAME_POINTER is defined in lib/Kconfig.debug.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
The common pattern in arm is to emit a "8<--- cut here ---" line for
faults, but it was missing for do_PrefetchAbort(). Add it.
Cc: Wang Kefeng <wangkefeng.wang@huawei.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Under PAN emulation when dumping backtraces from things like the
LKDTM EXEC_USERSPACE test[1], a double fault (which would hang a CPU)
would happen because of dump_instr() attempting to read a userspace
address. Make sure copy_from_kernel_nofault() does not attempt this
any more.
Closes: https://lava.sirena.org.uk/scheduler/job/497571
Link: https://lore.kernel.org/all/202401181125.D48DCB4C@keescook/ [1]
Reported-by: Mark Brown <broonie@kernel.org>
Suggested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Cc: Wang Kefeng <wangkefeng.wang@huawei.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Every other architecture in Linux includes the line "Call trace:" before
backtraces. In some cases ARM would print "Backtrace:", but this was
only via 1 specific call path, and wasn't included in CPU Oops nor things
like KASAN, UBSAN, etc that called dump_stack(). Regularize this line
so CI systems and other things (like LKDTM) that depend on parsing
"Call trace:" out of dmesg will see it for ARM.
Before this patch:
UBSAN: array-index-out-of-bounds in ../drivers/misc/lkdtm/bugs.c:376:16
index 8 is out of range for type 'char [8]'
CPU: 0 PID: 1402 Comm: cat Not tainted 6.7.0-rc2 #1
Hardware name: Generic DT based system
dump_backtrace from show_stack+0x20/0x24
r7:00000042 r6:00000000 r5:60070013 r4:80cf5d7c
show_stack from dump_stack_lvl+0x88/0x98
dump_stack_lvl from dump_stack+0x18/0x1c
r7:00000042 r6:00000008 r5:00000008 r4:80fab118
dump_stack from ubsan_epilogue+0x10/0x3c
ubsan_epilogue from __ubsan_handle_out_of_bounds+0x80/0x84
...
After this patch:
UBSAN: array-index-out-of-bounds in ../drivers/misc/lkdtm/bugs.c:376:16
index 8 is out of range for type 'char [8]'
CPU: 0 PID: 1402 Comm: cat Not tainted 6.7.0-rc2 #1
Hardware name: Generic DT based system
Call trace:
dump_backtrace from show_stack+0x20/0x24
r7:00000042 r6:00000000 r5:60070013 r4:80cf5d7c
show_stack from dump_stack_lvl+0x88/0x98
dump_stack_lvl from dump_stack+0x18/0x1c
r7:00000042 r6:00000008 r5:00000008 r4:80fab118
dump_stack from ubsan_epilogue+0x10/0x3c
ubsan_epilogue from __ubsan_handle_out_of_bounds+0x80/0x84
...
Link: https://lore.kernel.org/r/20240110215554.work.460-kees@kernel.org
Reported-by: Mark Brown <broonie@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Vladimir Murzin <vladimir.murzin@arm.com>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Keith Packard <keithpac@amazon.com>
Cc: Haibo Li <haibo.li@mediatek.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Change the "/**" beginning of comment to the common "/*" comment
since the comment is not in kernel-doc format. This prevents a
kernel-doc warning:
arch/arm/mm/init.c:422: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* update_sections_early intended to be called only through stop_machine
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: patches@armlinux.org.uk
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Now that we are reading the full FIFO in the interrupt handler,
it is possible to have an emply FIFO since we are still receiving
1 interrupt per data. Handle correctly this case instead of having
an error causing a reset of the FIFO.
Fixes: 0829edc43e ("iio: imu: inv_mpu6050: read the full fifo when processing data")
Cc: stable@vger.kernel.org
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://lore.kernel.org/r/20240219154825.90656-1-inv.git-commit@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The newly added integrity_recheck() function has another larger stack
allocation, just like its caller integrity_metadata(). When it gets
inlined, the combination of the two exceeds the warning limit for 32-bit
architectures and possibly risks an overflow when this is called from
a deep call chain through a file system:
drivers/md/dm-integrity.c:1767:13: error: stack frame size (1048) exceeds limit (1024) in 'integrity_metadata' [-Werror,-Wframe-larger-than]
1767 | static void integrity_metadata(struct work_struct *w)
Since the caller at this point is done using its checksum buffer,
just reuse the same buffer in the new function to avoid the double
allocation.
[Mikulas: add "noinline" to integrity_recheck and verity_recheck.
These functions are only called on error, so they shouldn't bloat the
stack frame or code size of the caller.]
Fixes: c88f5e553f ("dm-integrity: recheck the integrity tag after a failure")
Fixes: 9177f3c0de ("dm-verity: recheck the hash after a failure")
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
A minimum sampling rate value of 10ms was introduced in:
commit cef9615a85 ("[CPUFREQ] ondemand: Uncouple minimal sampling rate from HZ in NO_HZ case")
The use of this value was removed in:
commit ed4676e254 ("cpufreq: Replace "max_transition_latency" with "dynamic_switching"")
Remove:
- a comment referencing this value
- an unused macro associated to this value
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Update default balanced_performance EPP to 115 and performance EPP to 16.
Changing the balanced_performance EPP has better performance/watt
compared to default powerup EPP value of 128.
Changing the performance EPP to 0x10 shows reduced power for similar
performance as EPP 0. On small form factor devices this is beneficial
as lower power results in lower CPU and skin temperature. This
results in reduced thermal throttling and higher performance.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The current implementation allows model specific EPP override for
balanced_performance. Add feature to allow model specific EPP for all
predefined EPP strings. For example for some CPU models, even changing
performance EPP has benefits
Use a mask of EPPs as driver_data instead of just balanced_performance.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There is a loophole in pstate limit clamping for the intel_cpufreq CPU
frequency scaling driver (intel_pstate in passive mode), schedutil CPU
frequency scaling governor, HWP (HardWare Pstate) control enabled, when
the adjust_perf call back path is used.
Fix it.
Fixes: a365ab6b9d cpufreq: intel_pstate: Implement the ->adjust_perf() callback
Signed-off-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Calling CBC with ciphertext stealing "CBC-CTS" seems to be more common
than calling it "CTS-CBC". E.g., CBC-CTS is used by OpenSSL, Crypto++,
RFC3962, and RFC6803. The NIST SP800-38A addendum uses CBC-CS1,
CBC-CS2, and CBC-CS3, distinguishing between different CTS conventions
but similarly putting the CBC part first. In the interest of avoiding
any idiosyncratic terminology, update the fscrypt documentation and the
fscrypt_mode "friendly names" to align with the more common convention.
Changing the "friendly names" only affects some log messages. The
actual mode constants in the API are unchanged; those call it simply
"CTS". Add a note to the documentation that clarifies that "CBC" and
"CTS" in the API really mean CBC-ESSIV and CBC-CTS, respectively.
Link: https://lore.kernel.org/r/20240224053550.44659-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Per the comment in the error case of xfs_reflink_recover_cow, zero out
any error (after shutting down the log) so that we actually kill any new
intent items that might have gotten logged by later recovery steps.
Discovered by xfs/434, which few people actually seem to run.
Fixes: 2c1e31ed5c ("xfs: place intent recovery under NOFS allocation context")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
This series cleans up a few bits of the symbolic link code as needed for
future projects. Online repair requires the ability to commit fixed
fork-based filesystem metadata such as directories, xattrs, and symbolic
links atomically, so we need to rearrange the symlink code before we
land the atomic extent swapping.
Accomplish this by moving the remote symlink target block code and
declarations to xfs_symlink_remote.[ch].
This has been running on the djcloud for months with no problems. Enjoy!
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZdlBYwAKCRBKO3ySh0YR
ppvvAP0S+kTZ96zROb68pfy4xo5X0mcFvtuHQo4mc4Mu6UZf0AD+Lr/Xdnj/J9k1
8FEV933MFzWHINeeGUpaN8zgZBCvKA0=
=Lgry
-----END PGP SIGNATURE-----
Merge tag 'symlink-cleanups-6.9_2024-02-23' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.9-mergeC
xfs: clean up symbolic link code
This series cleans up a few bits of the symbolic link code as needed for
future projects. Online repair requires the ability to commit fixed
fork-based filesystem metadata such as directories, xattrs, and symbolic
links atomically, so we need to rearrange the symlink code before we
land the atomic extent swapping.
Accomplish this by moving the remote symlink target block code and
declarations to xfs_symlink_remote.[ch].
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
* tag 'symlink-cleanups-6.9_2024-02-23' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: move symlink target write function to libxfs
xfs: move remote symlink target read function to libxfs
xfs: move xfs_symlink_remote.c declarations to xfs_symlink_remote.h
In preparation for atomic extent swapping and the online repair
functionality that wants atomic extent swaps, enhance the BUI code so
that we can support deferred work on the extended attribute fork and on
unwritten extents.
This has been running on the djcloud for months with no problems. Enjoy!
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZdlBYwAKCRBKO3ySh0YR
pnrTAP9dlLFGNBbmsOBR2KxzC56gShXMXHzytjxdMhh4JjnyJgD/XVTJYSxZuX9z
VbWq8ZyCZwvS/onTnQw7WQcdhIkDTAo=
=WQpT
-----END PGP SIGNATURE-----
Merge tag 'expand-bmap-intent-usage_2024-02-23' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.9-mergeC
xfs: support attrfork and unwritten BUIs
In preparation for atomic extent swapping and the online repair
functionality that wants atomic extent swaps, enhance the BUI code so
that we can support deferred work on the extended attribute fork and on
unwritten extents.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
* tag 'expand-bmap-intent-usage_2024-02-23' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: xfs_bmap_finish_one should map unwritten extents properly
xfs: support deferred bmap updates on the attr fork