Commit graph

1,294,546 commits

Author SHA1 Message Date
Konrad Dybcio
117e7dc697 clk: qcom: dispcc-sdm845: Adjust internal GDSC wait times
SDM845 downstream uses non-default values for GDSC internal waits.
Program them accordingly to avoid surprises.

Fixes: 81351776c9 ("clk: qcom: Add display clock controller driver for SDM845")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Caleb Connolly <caleb.connolly@linaro.org> # OnePlus 6
Link: https://lore.kernel.org/r/20240103-topic-845gdsc-v1-1-368efbe1a61d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-02-16 11:43:05 -06:00
Arnd Bergmann
0affdba22a nouveau: fix function cast warnings
clang-16 warns about casting between incompatible function types:

drivers/gpu/drm/nouveau/nvkm/subdev/bios/shadow.c:161:10: error: cast from 'void (*)(const struct firmware *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
  161 |         .fini = (void(*)(void *))release_firmware,

This one was done to use the generic shadow_fw_release() function as a
callback for struct nvbios_source. Change it to use the same prototype
as the other five instances, with a trivial helper function that actually
calls release_firmware.

Fixes: 70c0f263cc ("drm/nouveau/bios: pull in basic vbios subdev, more to come later")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240213095753.455062-1-arnd@kernel.org
2024-02-16 18:38:47 +01:00
Dmitry Baryshkov
6496dba142 soc: qcom: spm: add support for voltage regulator
The SPM / SAW2 device also provides a voltage regulator functionality
with optional AVS (Adaptive Voltage Scaling) support. The exact register
sequence and voltage ranges differs from device to device.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240102-saw2-spm-regulator-v7-5-0472ec237f49@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-02-16 11:30:57 -06:00
Dmitry Baryshkov
57e2b067f1 soc: qcom: spm: remove driver-internal structures from the driver API
Move internal SPM driver structures to the driver itself, removing them
from the public API. The CPUidle driver doesn't use them at all.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240102-saw2-spm-regulator-v7-4-0472ec237f49@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-02-16 11:30:57 -06:00
Dmitry Baryshkov
aa4e327fbb dt-bindings: soc: qcom: qcom,saw2: define optional regulator node
The SAW2 device can optionally provide a voltage regulator supplying the
CPU core, cluster or L2 cache. Change the boolean 'regulator' property
into a proper regulator description. This breaks schema compatibility
for the sake of properly describing the regulator.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240102-saw2-spm-regulator-v7-3-0472ec237f49@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-02-16 11:30:57 -06:00
Dmitry Baryshkov
31ac56a59e dt-bindings: soc: qcom: qcom,saw2: add missing compatible strings
Define compatible strings for SAW2 units present on MSM8960, IPQ4019
and IPQ8064.  There is no need to include SAW version into the compat
string, so just use the SoC and SAW2 kind.

Also add missing L2 SAW2 compatibles for MSM8974 and APQ8084, they
follow the existing CPU SAW2 strings.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240102-saw2-spm-regulator-v7-2-0472ec237f49@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-02-16 11:30:57 -06:00
Dmitry Baryshkov
c9491a16e5 dt-bindings: soc: qcom: merge qcom,saw2.txt into qcom,spm.yaml
The Qualcomm SPM / SAW2 device is described in two bindigns files:
arm/msm/qcom,saw2.txt and soc/qcom/qcom,spm.yaml. Merge the former into
the latter, adding detailed device node description. While we are at it,
also rename qcom,spm.yaml to qcom,saw2.yaml to follow the actual
compatible used for these devices.

The regulator property is retained as is. It will be changed in the
later patches.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240102-saw2-spm-regulator-v7-1-0472ec237f49@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-02-16 11:30:57 -06:00
Linus Torvalds
efb0b63afc zonefs fixes for 6.8.0-rc5
- Fix direct write error handling to avoid a race between failed IO
    completion and the submission path itself which can result in an
    invalid file size exposed to the user after the failed IO.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCZc9S/AAKCRDdoc3SxdoY
 dgilAQDhQeRxzZLXO5lh5LGeqveo88kXuQclCK9VeqnCr0cnHQD/RTXvo464Vf4c
 DAuDtLxRA16sj8WlLkUVkvjMKdjYaQ8=
 =n1Tp
 -----END PGP SIGNATURE-----

Merge tag 'zonefs-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs

Pull zonefs fix from Damien Le Moal:

 - Fix direct write error handling to avoid a race between failed IO
   completion and the submission path itself which can result in an
   invalid file size exposed to the user after the failed IO.

* tag 'zonefs-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
  zonefs: Improve error handling
2024-02-16 09:29:26 -08:00
Ivan Vecera
f09cbb6c94 i40e: Remove VEB recursion
The VEB (virtual embedded switch) as a switch element can be
connected according datasheet though its uplink to:
- Physical port
- Port Virtualizer (not used directly by i40e driver but can
  be present in MFP mode where the physical port is shared
  between PFs)
- No uplink (aka floating VEB)

But VEB uplink cannot be connected to another VEB and any attempt
to do so results in:

"i40e 0000:02:00.0: couldn't add VEB, err -EIO aq_err I40E_AQ_RC_ENOENT"

that indicates "the uplink SEID does not point to valid element".

Remove this logic from the driver code this way:

1) For debugfs only allow to build floating VEB (uplink_seid == 0)
   or main VEB (uplink_seid == mac_seid)
2) Do not recurse in i40e_veb_link_event() as no VEB cannot have
   sub-VEBs
3) Ditto for i40e_veb_rebuild() + simplify the function as we know
   that the VEB for rebuild can be only the main LAN VEB or some
   of the floating VEBs
4) In i40e_rebuild() there is no need to check veb->uplink_seid
   as the possible ones are 0 and MAC SEID
5) In i40e_vsi_release() do not take into account VEBs whose
   uplink is another VEB as this is not possible
6) Remove veb_idx field from i40e_veb as a VEB cannot have
   sub-VEBs

Tested using i40e debugfs interface:
1) Initial state
[root@cnb-03 net-next]# CMD="/sys/kernel/debug/i40e/0000:02:00.0/command"
[root@cnb-03 net-next]# echo dump switch > $CMD
[root@cnb-03 net-next]# dmesg -c
[   98.440641] i40e 0000:02:00.0: header: 3 reported 3 total
[   98.446053] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[   98.452593] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[   98.458856] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16

2) Add floating VEB
[root@cnb-03 net-next]# echo add relay > $CMD
[root@cnb-03 net-next]# dmesg -c
[  122.745630] i40e 0000:02:00.0: added relay 162
[root@cnb-03 net-next]# echo dump switch > $CMD
[root@cnb-03 net-next]# dmesg -c
[  136.650049] i40e 0000:02:00.0: header: 4 reported 4 total
[  136.655466] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[  136.661994] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[  136.668264] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
[  136.674787] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0

3) Add VMDQ2 VSI to this new VEB
[root@cnb-03 net-next]# dmesg -c
[  168.351763] i40e 0000:02:00.0: added VSI 394 to relay 162
[  168.374652] enp2s0f0np0v0: NIC Link is Up, 40 Gbps Full Duplex, Flow Control: None
[root@cnb-03 net-next]# echo dump switch > $CMD
[root@cnb-03 net-next]# dmesg -c
[  195.683204] i40e 0000:02:00.0: header: 5 reported 5 total
[  195.688611] i40e 0000:02:00.0: type=19 seid=394 uplink=162 downlink=16
[  195.695143] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0
[  195.701410] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[  195.707935] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[  195.714201] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16

4) Try to delete the VEB
[root@cnb-03 net-next]# echo del relay 162 > $CMD
[root@cnb-03 net-next]# dmesg -c
[  239.260901] i40e 0000:02:00.0: deleting relay 162
[  239.265621] i40e 0000:02:00.0: can't remove VEB 162 with 1 VSIs left

5) Do PF reset and check switch status after rebuild
[root@cnb-03 net-next]# echo pfr > $CMD
[root@cnb-03 net-next]# echo dump switch > $CMD
[root@cnb-03 net-next]# dmesg -c
...
[  272.333655] i40e 0000:02:00.0: header: 5 reported 5 total
[  272.339066] i40e 0000:02:00.0: type=19 seid=394 uplink=162 downlink=16
[  272.345599] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0
[  272.351862] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[  272.358387] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[  272.364654] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16

6) Delete VSI and delete VEB
[  297.199116] i40e 0000:02:00.0: deleting VSI 394
[  299.807580] i40e 0000:02:00.0: deleting relay 162
[  309.767905] i40e 0000:02:00.0: header: 3 reported 3 total
[  309.773318] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[  309.779845] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[  309.786111] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16

Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-02-16 09:28:14 -08:00
Ivan Vecera
08cdde310e i40e: Fix broken support for floating VEBs
Although the i40e supports so-called floating VEB (VEB without
an uplink connection to external network), this support is
broken. This functionality is currently unused (except debugfs)
but it will be used by subsequent series for switchdev mode
slow-path. Fix this by following:

1) Handle correctly floating VEB (VEB with uplink_seid == 0)
   in i40e_reconstitute_veb() and look for owner VSI and
   create it only for non-floating VEBs and also set bridge
   mode only for such VEBs as the floating ones are using
   always VEB mode.
2) Handle correctly floating VEB in i40e_veb_release() and
   disallow its release when there are some VSIs. This is
   different from regular VEB that have owner VSI that is
   connected to VEB's uplink after VEB deletion by FW.
3) Fix i40e_add_veb() to handle 'vsi' that is NULL for floating
   VEBs. For floating VEB use 0 for downlink SEID and 'true'
   for 'default_port' parameters as per datasheet.
4) Fix 'add relay' command in i40e_dbg_command_write() to allow
   to create floating VEB by 'add relay 0 0' or 'add relay'

Tested using debugfs:
1) Initial state
[root@host net-next]# echo dump switch > $CMD
[root@host net-next]# dmesg -c
[  173.701286] i40e 0000:02:00.0: header: 3 reported 3 total
[  173.706701] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[  173.713241] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[  173.719507] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16

2) Add floating VEB
[root@host net-next]# CMD="/sys/kernel/debug/i40e/0000:02:00.0/command"
[root@host net-next]# echo add relay > $CMD
[root@host net-next]# dmesg -c
[  245.551720] i40e 0000:02:00.0: added relay 162
[root@host net-next]# echo dump switch > $CMD
[root@host net-next]# dmesg -c
[  276.984371] i40e 0000:02:00.0: header: 4 reported 4 total
[  276.989779] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[  276.996302] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[  277.002569] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
[  277.009091] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0

3) Add VMDQ2 VSI to this new VEB
[root@host net-next]# echo add vsi 162 > $CMD
[root@host net-next]# dmesg -c
[  332.314030] i40e 0000:02:00.0: added VSI 394 to relay 162
[  332.337486] enp2s0f0np0v0: NIC Link is Up, 40 Gbps Full Duplex, Flow Control: None
[root@host net-next]# echo dump switch > $CMD
[root@host net-next]# dmesg -c
[  387.284490] i40e 0000:02:00.0: header: 5 reported 5 total
[  387.289904] i40e 0000:02:00.0: type=19 seid=394 uplink=162 downlink=16
[  387.296446] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0
[  387.302708] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[  387.309234] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[  387.315500] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16

4) Try to delete the VEB
[root@host net-next]# echo del relay 162 > $CMD
[root@host net-next]# dmesg -c
[  428.749297] i40e 0000:02:00.0: deleting relay 162
[  428.754011] i40e 0000:02:00.0: can't remove VEB 162 with 1 VSIs left

5) Do PF reset and check switch status after rebuild
[root@host net-next]# echo pfr > $CMD
[root@host net-next]# echo dump switch > $CMD
[root@host net-next]# dmesg -c
[  738.056172] i40e 0000:02:00.0: header: 5 reported 5 total
[  738.061577] i40e 0000:02:00.0: type=19 seid=394 uplink=162 downlink=16
[  738.068104] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0
[  738.074367] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[  738.080892] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[  738.087160] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16

6) Delete VSI and delete VEB
[root@host net-next]# echo del vsi 394 > $CMD
[root@host net-next]# echo del relay 162 > $CMD
[root@host net-next]# echo dump switch > $CMD
[root@host net-next]# dmesg -c
[ 1233.081126] i40e 0000:02:00.0: deleting VSI 394
[ 1239.345139] i40e 0000:02:00.0: deleting relay 162
[ 1244.886920] i40e 0000:02:00.0: header: 3 reported 3 total
[ 1244.892328] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 1244.898853] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 1244.905119] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16

Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-02-16 09:28:14 -08:00
Ivan Vecera
b7fac08db5 i40e: Add helpers to find VSI and VEB by SEID and use them
Add two helpers i40e_(veb|vsi)_get_by_seid() to find corresponding
VEB or VSI by their SEID value and use these helpers to replace
existing open-coded loops.

Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-02-16 09:28:14 -08:00
Ivan Vecera
b1f1b46f46 i40e: Introduce and use macros for iterating VSIs and VEBs
Introduce i40e_for_each_vsi() and i40e_for_each_veb() helper
macros and use them to iterate relevant arrays.

Replace pattern:
for (i = 0; i < pf->num_alloc_vsi; i++)
by:
i40e_for_each_vsi(pf, i, vsi)

and pattern:
for (i = 0; i < I40E_MAX_VEB; i++)
by
i40e_for_each_veb(pf, i, veb)

These macros also check if array item pf->vsi[i] or pf->veb[i]
are not NULL and skip such items so we can remove redundant
checks from loop bodies.

Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-02-16 09:28:14 -08:00
Ivan Vecera
7e6cec7d3b i40e: Use existing helper to find flow director VSI
Use existing i40e_find_vsi_by_type() to find a VSI
associated with flow director.

Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-02-16 09:28:14 -08:00
Luca Weiss
891af1aa1e arm64: dts: qcom: sm7225-fairphone-fp4: Enable display and GPU
Add the description for the display panel found on this phone.
Unfortunately the LCDB module on PM6150L isn't yet supported upstream so
we need to use a dummy regulator-fixed in the meantime.

And with this done we can also enable the GPU and set the zap shader
firmware path.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20240216-fp4-panel-v3-4-a556e4b79640@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-02-16 11:18:49 -06:00
Luca Weiss
2abe4a310c arm64: dts: qcom: sm6350: Remove "disabled" state of GMU
The GMU won't probe without GPU being enabled, so we can remove the
disabled status so we don't have to explicitly enable the GMU in all the
devices that enable GPU.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20240216-fp4-panel-v3-3-a556e4b79640@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-02-16 11:18:32 -06:00
Dmitry Baryshkov
6624b25c20 dt-bindings: clk: qcom: drop the SC7180 Modem subsystem clock controller
This clock controller has never been used in the DT files merged to the
kernel. According to Sibi, it only worked on the pre-production devices.
For the production devices this functionality has been moved to the
firmware.

Drop the bindings now after dropping the driver itself.

Cc: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240216-drop-sc7180-mss-v1-2-0a8dc8d71c0c@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-02-16 11:17:16 -06:00
Dmitry Baryshkov
c630cf8f3a clk: qcom: drop the SC7180 Modem subsystem clock driver
This driver has never been used in the DT files merged to the kernel.
According to Sibi, it only worked on the pre-production devices. For the
production devices this functionality has been moved to the firmware.

Drop the driver to remove possible confusion.

Cc: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240216-drop-sc7180-mss-v1-1-0a8dc8d71c0c@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-02-16 11:17:16 -06:00
Joe Mason
b61fbc595e arm64: dts: qcom: msm8916-samsung-fortuna/rossa: Add fuel gauge
Like the Samsung Galaxy A3/A5, the Grand Prime/Core Prime uses a
Richtek RT5033 PMIC as battery fuel gauge, charger, flash LED and for some
regulators.
For now, only add the fuel gauge/battery device to the device tree, so we
can check the remaining battery percentage.

The other RT5033 drivers need some more work first before they can be used
properly.

Signed-off-by: Joe Mason <buddyjojo06@outlook.com>
[Raymond: Move to fortuna-common. Use interrupts-extended]
Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240216124639.24689-1-raymondhackley@protonmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-02-16 11:16:43 -06:00
Luca Weiss
fc48bb3135 arm64: dts: qcom: sm6350: Add interconnect for MDSS
Add the definition for the interconnect used in the display subsystem.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240216-sm6350-interconnect-v1-1-9d55667c06ca@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-02-16 11:16:37 -06:00
Marcos Paulo de Souza
7648f0c91e selftests/bpf: Remove empty TEST_CUSTOM_PROGS
Commit f04a32b2c5 ("selftests/bpf: Do not use sign-file as testcase")
removed the TEST_CUSTOM_PROGS assignment, and removed it from being used
on TEST_GEN_FILES. Remove two leftovers from that cleanup. Found by
inspection.

Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexey Gladkov <legion@kernel.org>
Link: https://lore.kernel.org/bpf/20240216-bpf-selftests-custom-progs-v1-1-f7cf281a1fda@suse.com
2024-02-16 18:08:26 +01:00
Jiri Slaby (SUSE)
1e5a2ec938 char/agp: remove agp_bridge_data::type
agp_bridge_data::type is unused (and I cannot find when was used last).

Therefore, remove it.

Found by https://github.com/jirislaby/clang-struct.

Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: David Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20240213111511.25187-1-jirislaby@kernel.org
2024-02-16 18:07:13 +01:00
Paolo Bonzini
9895ceeb5c KVM/arm64 fixes for 6.8, take #2
- Avoid dropping the page refcount twice when freeing an unlinked
   page-table subtree.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAmXOK/wACgkQI9DQutE9
 ekOrRg/6AmztTv19AudXL1+iLd35Hbfx49WKlgCghpTTDwHg+d4gxiM/S19A3l71
 w1s/XxWINZNIdjklc4XQVuUkIgvx51x7orBP8FnGoKNh3qVz3rcWd+DFkMoAUDMQ
 f/r1nAq/GfP5syDschYXpfSHZwe0n8tkxiq2VDR+V8khFzx5EWlTwj/rMNnWSdQx
 YxCLrlb1MD5M+IKYThO0b2ttcax5hNw/7LoBbV2YsjYkEYsxzKR5TbzgWBOre9pQ
 Mh0xn5fZHEfYcW7CGYDn4niHJkXoaG6BCDSR2XkUKuZVLzKDYMlF/5WT2eUqRHmJ
 b6oA/mA6ktFL//WfZpejSUDLa6ZEqjCE/g2XRI4YRvpm1SLhIGFy3d5ZBQp7zulK
 7IICUGlG+QuQEyHG/t/LUl8Y7VveMUpoqdIhronvNNJlmvPtsAxhH6qBq/MSkA8l
 E4SzEqXxJKWLNTt1yCWLeBNE1MApERwDdUoKA6Z3tG8GE0/DtWsC6mdVBvb8pxEY
 /z+53ZsHKpfJ7+4FqHHv7L+fmOUuyuiBbUfUNI0ab4MCfJwFiDB1DDuS/DH5OE2j
 SogWQpFxPCiqMww+UNA4GMDAaQkCNiAR410ZDp5WzBYJW+eBG8B97WJYpVECqk92
 /asMDtU8pEjilQBZogjAIDlaJF1RxFAfCOWJRh0U8VKF1XfcxuE=
 =Coky
 -----END PGP SIGNATURE-----

Merge tag 'kvmarm-fixes-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.8, take #2

- Avoid dropping the page refcount twice when freeing an unlinked
  page-table subtree.
2024-02-16 12:02:38 -05:00
Paolo Bonzini
8046fa5fc2 KVM/arm64 fixes for 6.8, take #1
- Don't source the VFIO Kconfig twice
 
 - Fix protected-mode locking order between kvm and vcpus
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAmXDlY4ACgkQI9DQutE9
 ekN6nRAAi0JEvY80wiztUSqolhT0/M2oewwxuJ9TcCvMbRhndcoEUKki4OqdhIth
 QOVVSNd2LNSRaObNAr0nRpwB2Kdn372l3AtlIieYAnlER/idXQaTPuhR3mmby2LP
 zhQdgPQm1Nju6ga7FbjFvlXo9hkZPbt8gaW7kP/K/SttFm+3a5ycqpB+U0ttvGqf
 PhhImP3xPDnkQXe7NasTKAOkBtB8l2Q/ByqoN5+Xk3SgGRh8o/Uu3E4t3A8/7VmW
 dRB24gbgnAbbgY4P7IsMrCAtHl0dFfkrEef8Ri6pw3nVd/SMzH52MbizQROd2flh
 Qvhld/UBzGbk+oRf6JJ9AzXdY2vGl0LDGw4VxEfvn+JpB2wMRhcmnupcwTdkJq6g
 lyzH9aOHJmNnPRvSDapHMIvlUxmV5ay4XGBopd0jUWaZoB3vsoxW2wPPA52iP66p
 82cXWtOUPmsRE49D7+jVxtLjrw0gf9BQyGZ7StTxuhSKsoEGyHgrsSvuI4s4hohd
 VUrUf76xLi9yKnk4hYZ3Sbgz0KAHXRwkK2l5oW5zwL3BI5JnwgtFBB0R9e8hbYbN
 nVMO6Q5Xwc3VJKNmGQTLCzBEIaeLsR5k+w9kYDatCDSMqfZq6evu/ipGqtup7fK9
 9u+FfFosnXEYnC/cstqPwVO9DIVjzjeDEEz5JtUUoiKSBMOGcLQ=
 =wb0z
 -----END PGP SIGNATURE-----

Merge tag 'kvmarm-fixes-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.8, take #1

- Don't source the VFIO Kconfig twice

- Fix protected-mode locking order between kvm and vcpus
2024-02-16 12:02:31 -05:00
Linus Torvalds
0f1dd5e91e sound fixes for 6.8-rc5
A collection of device-specific fixes.  It became a bit bigger
 than wished, but all look reasonably small and safe to apply.
 
 - A few Cirrus Logic CS35L56 and CS42L43 driver fixes
 - ASoC SOF fixes and workarounds
 - Various ASoC Intel fixes
 - Lots of HD-, USB-audio and AMD ACP quirks
 -----BEGIN PGP SIGNATURE-----
 
 iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmXPayMOHHRpd2FpQHN1
 c2UuZGUACgkQLtJE4w1nLE8wnhAAvJIP/ZCsVnOKkTPcns9shxcI8zaFKWOdOOny
 mfL2M44glIxbcdUBDM2Ic1MX2lK6WVpDDXo+leAbbITLN985MFFwhg/NzS7QbEQu
 ZRi28Keubbh2zqPzBOajiS1s10ELlQtiIGGEHccspElMEesitNqu0Hmd4NSWnTCX
 iTsx4JwDQiiO1cOdanJ7134Jngp6q05nFVM3Y47wmqYLkP9z9/2hCRsq8scZ2f40
 Blc7oEfqT10HFqXCqVZsHbLioDC03eCD9AoiUkkqDb/Hz21wemmyeiXT4OmbAIFp
 ritzPz1RpeJhsOURyiE3KM2kQluh+JBK5Rq3eJ1tmxJbIWEAwbYRXs+yRHr2i6Xi
 oOBVBc9Dq2RwKV7RnWIcV3+ZxrERJp80a4TKMSpQyECkDGiwZLyS/nGfM2+fJKg8
 c66ofk+TfsnYZfKaonXwVf+HVqoMLsAo6bxle/0gLT6S3G6DvSGj3pWGqF8uZQJt
 vpUbqSJBEI0JZTLngkWZRHPrLcCu+W+9/QrkTRYdwZUh5DfS9wbzXVz2Jm3cXpnB
 os3v+lfJwXS6FBT51zCbO8BKbXPlaIQbLwPRW2+5zI2MaoEocAm0lSU1SXGcOuJY
 6N5t6hHHNn7g7Gv8oimHQCKvzOUjnyVCDAn7P7/ILjoV47oQH9QRoNmHNNLjSzj1
 4xr4yCg=
 =PlQh
 -----END PGP SIGNATURE-----

Merge tag 'sound-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "A collection of device-specific fixes. It became a bit bigger than
  wished, but all look reasonably small and safe to apply.

   - A few Cirrus Logic CS35L56 and CS42L43 driver fixes

   - ASoC SOF fixes and workarounds

   - Various ASoC Intel fixes

   - Lots of HD-, USB-audio and AMD ACP quirks"

* tag 'sound-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (33 commits)
  ALSA: usb-audio: More relaxed check of MIDI jack names
  ALSA: hda/realtek: fix mute/micmute LED For HP mt645
  ALSA: hda/realtek: cs35l41: Fix order and duplicates in quirks table
  ALSA: hda/realtek: cs35l41: Fix device ID / model name
  ALSA: hda/realtek: cs35l41: Add internal speaker support for ASUS UM3402 with missing DSD
  ASoC: cs35l56: Workaround for ACPI with broken spk-id-gpios property
  ALSA: hda: Add Lenovo Legion 7i gen7 sound quirk
  ASoC: SOF: IPC3: fix message bounds on ipc ops
  ASoC: SOF: ipc4-pcm: Workaround for crashed firmware on system suspend
  ASoC: q6dsp: fix event handler prototype
  ASoC: SOF: Intel: pci-lnl: Change the topology path to intel/sof-ipc4-tplg
  ASoC: SOF: Intel: pci-tgl: Change the default paths and firmware names
  ASoC: amd: yc: Fix non-functional mic on Lenovo 82UU
  ASoC: rt5645: Add DMI quirk for inverted jack-detect on MeeGoPad T8
  ASoC: rt5645: Make LattePanda board DMI match more precise
  ASoC: SOF: amd: Fix locking in ACP IRQ handler
  ASoC: rt5645: Fix deadlock in rt5645_jack_detect_work()
  ASoC: Intel: cht_bsw_rt5645: Cleanup codec_name handling
  ASoC: Intel: Boards: Fix NULL pointer deref in BYT/CHT boards
  ASoC: cs35l56: Remove default from IRQ1_CFG register
  ...
2024-02-16 09:02:19 -08:00
Linus Torvalds
beda9c23ad gpio fixes for v6.8-rc5
- add missing stubs for functions that are not built with GPIOLIB disabled
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAmXPOMwACgkQEacuoBRx
 13KLsBAAn7FzIMmT9qMN11tF4dcXq2nHciEJR85PqmaQ5i5lGGCqUA/BkTSONM9m
 zJkzncBpQ0K9apjFb1Z2571LN3xHqINcUPxkRMnORF9f+kgGLfb/IRq5sRPPW87t
 WcxV/QAeVA7MchRiOa+ZwWjB4IRgsQ6S3zQCOHzxkWlh9NR8fx9CVCMMZS8UsKdk
 PDycC9F0RxlkEo2zQJHkEkWtPMgncPGej6zLqYbGG5qgzUbi92NYmvm+Wqz3/oFD
 /9iAe+KYRIoRBDqtVE7kzB/CbQo2yuGCT6ft/96tCJOOT4e/FX/qwRnAUKcb0ECN
 c9GhbIh8FY3gpUi8nqunepA3iRZIWhQZIGEe56CKMvd5p57KsYIOu655lJspfb0W
 zrEUORPfJ/bNxzyS1z/uw++QGevEkI3d4BkhhFuW8g8pO1Up0NHG6I+9ValqHSH5
 v9nDJlxN0u1dOrSrB0RmkcBKwLHmvDJQVPmDYsmzfvdPwhEJP6r1VeszeAJZ28ot
 Q+X9Yn4C0tlU4X6yq7Hze4P300at0Ggq5xNWmD/QScRCHz1fSwiJboVEmAth6oUJ
 dtCozwB9fU2pBow350jSSj5SMVW+00g/LMFsjaIf7+xtgf9m7aFcyi+XgAr0Klkq
 XVLsEuB7+qTXrLIOxOi6z5aCLN0GApk2rSM/6fYsm7k265C8kk8=
 =73oi
 -----END PGP SIGNATURE-----

Merge tag 'gpio-fixes-for-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

Pull gpio fixes from Bartosz Golaszewski:

 - add missing stubs for functions that are not built with GPIOLIB
   disabled

* tag 'gpio-fixes-for-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpiolib: add gpio_device_get_label() stub for !GPIOLIB
  gpiolib: add gpio_device_get_base() stub for !GPIOLIB
  gpiolib: add gpiod_to_gpio_device() stub for !GPIOLIB
2024-02-16 08:55:46 -08:00
Tejun Heo
fd0a68a233 workqueue, irq_work: Build fix for !CONFIG_IRQ_WORK
2f34d7337d ("workqueue: Fix queue_work_on() with BH workqueues") added
irq_work usage to workqueue; however, it turns out irq_work is actually
optional and the change breaks build on configuration which doesn't have
CONFIG_IRQ_WORK enabled.

Fix build by making workqueue use irq_work only when CONFIG_SMP and enabling
CONFIG_IRQ_WORK when CONFIG_SMP is set. It's reasonable to argue that it may
be better to just always enable it. However, this still saves a small bit of
memory for tiny UP configs and also the least amount of change, so, for now,
let's keep it conditional.

Verified to do the right thing for x86_64 allnoconfig and defconfig, and
aarch64 allnoconfig, allnoconfig + prink disable (SMP but nothing selects
IRQ_WORK) and a modified aarch64 Kconfig where !SMP and nothing selects
IRQ_WORK.

v2: `depends on SMP` leads to Kconfig warnings when CONFIG_IRQ_WORK is
    selected by something else when !CONFIG_SMP. Use `def_bool y if SMP`
    instead.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Fixes: 2f34d7337d ("workqueue: Fix queue_work_on() with BH workqueues")
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2024-02-16 06:33:43 -10:00
Linus Torvalds
ca6a62f9fe drm fixes for 6.8-rc5
crtc:
 - fix uninit variable
 
 prime:
 - support > 4GB page arrays
 
 buddy:
 - fix error handling in allocations
 
 i915:
 - fix blankscreen on JSL chromebooks
 - stable fix to limit DP sst link rates
 
 xe:
 - Fix an out-of-bounds shift.
 - Fix the display code thinking xe uses shmem
 - Fix a warning about index out-of-bound
 - Fix a clang-16 compilation warning
 
 amdgpu:
 - PSR fixes
 - Suspend/resume fixes
 - Link training fix
 - Aspect ratio fix
 - DCN 3.5 fixes
 - VCN 4.x fix
 - GFX 11 fix
 - Misc display fixes
 - Misc small fixes
 
 amdkfd:
 - Cache size reporting fix
 - SIMD distribution fix
 
 msm:
 - GPU:
 - dmabuf vmap fix
 - a610 UBWC corruption fix (incorrect hbb)
 - revert a commit that was making GPU recovery unreliable
  - tlb invalidation fix
 
 ivpu:
 - suspend/resume fix
 
 nouveau:
 - fix scheduler cleanup path
 - fix pointless scheduler creation
 - fix kvalloc argument order
 
 rockchip:
 - vop2 locking fix
 -----BEGIN PGP SIGNATURE-----
 
 iQIyBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmXPDF0ACgkQDHTzWXnE
 hr5Q4Q/3eeZ8ghAf37SccoPt94DTMngTHjSujLW7SVXMda9w3tYGqDV0SpygnLrH
 +85oD96qdiN/QB1B4bfmX/qtXpcv10+09oEsPFvFo4lV+on1ThAlSyoSK68pXcNB
 nbvECXWs4phUq+c3ogi9iqEjmJ20lwbyBaqHmfhKvgA52XRc4WKdrlhkuZ9Hgwck
 GksrLNqnOE2zsunLmxdmg8NCSkWbnWP0LcazS4yC+ivqaqc6u9im0mzKR3BoxKPn
 vCQhxTK+WOL3akSyQAp8/O84V9tSzTAplVZYbUmRyZ5i00ITLv/HLQ7a/kfuSjlT
 Es26ChH/8LloMD1bcijso7VQCwoNI4VBsLtvQtLaQWTBz862Vgjgg2GOL0bpLPj8
 Oi6BixQ28RSI8Skm5pIleg/wFOhgwVZAPOgnHFr8/lmbdv/rIuQLq4bKCji+rBo3
 ESlcbRwG1zt4pKd15r+rOZJkWMJLrzL+IYbYD+VbTEo4bv8+d0jRCEVqHHSPkxaO
 DN5A/u2R+k25eLg/hn3CgYg43ej0gbZ1pQvw8Dztjq6MwoHEeHolAQ6yAV1XMaYw
 JO4zb/X2nQUaRAOE2iCZ3W9Oa6t7nWoguj40926I0xr+qMhWbH8N6iBICqrwCrYX
 cdvCxyZq7upro7EN0LPOlqDGbyQrz1OxS4nppCpuX5Q6hBr9HA==
 =g9gc
 -----END PGP SIGNATURE-----

Merge tag 'drm-fixes-2024-02-16' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
 "Regular weekly fixes, nothing too major, mostly amdgpu, then i915, xe,
  msm and nouveau with some scattered bits elsewhere.

  crtc:
   - fix uninit variable

  prime:
   - support > 4GB page arrays

  buddy:
   - fix error handling in allocations

  i915:
   - fix blankscreen on JSL chromebooks
   - stable fix to limit DP sst link rates

  xe:
   - Fix an out-of-bounds shift.
   - Fix the display code thinking xe uses shmem
   - Fix a warning about index out-of-bound
   - Fix a clang-16 compilation warning

  amdgpu:
   - PSR fixes
   - Suspend/resume fixes
   - Link training fix
   - Aspect ratio fix
   - DCN 3.5 fixes
   - VCN 4.x fix
   - GFX 11 fix
   - Misc display fixes
   - Misc small fixes

  amdkfd:
   - Cache size reporting fix
   - SIMD distribution fix

  msm:
   - GPU:
   - dmabuf vmap fix
   - a610 UBWC corruption fix (incorrect hbb)
   - revert a commit that was making GPU recovery unreliable
   - tlb invalidation fix

  ivpu:
   - suspend/resume fix

  nouveau:
   - fix scheduler cleanup path
   - fix pointless scheduler creation
   - fix kvalloc argument order

  rockchip:
   - vop2 locking fix"

* tag 'drm-fixes-2024-02-16' of git://anongit.freedesktop.org/drm/drm: (38 commits)
  drm/amdgpu: Fix implicit assumtion in gfx11 debug flags
  drm/amdkfd: update SIMD distribution algo for GFXIP 9.4.2 onwards
  drm/amd/display: Increase ips2_eval delay for DCN35
  drm/amdgpu/display: Initialize gamma correction mode variable in dcn30_get_gamcor_current()
  drm/amdgpu/soc21: update VCN 4 max HEVC encoding resolution
  drm/amd/display: fixed integer types and null check locations
  drm/amd/display: Fix array-index-out-of-bounds in dcn35_clkmgr
  drm/amd/display: Preserve original aspect ratio in create stream
  drm/amd/display: Fix possible NULL dereference on device remove/driver unload
  Revert "drm/amd/display: increased min_dcfclk_mhz and min_fclk_mhz"
  drm/amd/display: Add align done check
  Revert "drm/amd: flush any delayed gfxoff on suspend entry"
  drm/amd: Stop evicting resources on APUs in suspend
  drm/amd/display: Fix possible buffer overflow in 'find_dcfclk_for_voltage()'
  drm/amd/display: Fix possible use of uninitialized 'max_chunks_fbc_mode' in 'calculate_bandwidth()'
  drm/amd/display: Initialize 'wait_time_microsec' variable in link_dp_training_dpia.c
  drm/amd/display: Fix && vs || typos
  drm/amdkfd: Fix L2 cache size reporting in GFX9.4.3
  drm/amdgpu: make damage clips support configurable
  drm/msm: Wire up tlb ops
  ...
2024-02-16 08:05:30 -08:00
Linus Torvalds
b8ef920168 lsm/stable-6.8 PR 20240215
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCAAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAmXOi94UHHBhdWxAcGF1
 bC1tb29yZS5jb20ACgkQ6iDy2pc3iXNtBRAAgbZnKpuUAmXdx5Z4IEfFOGJ+p5BI
 FzfL6kSYWw91MABi5kCbIHLhtNMO9nRTMZKXzbintltk/1dD1hEojTR2h7r4M+fj
 Bn0bFaWI1lYKN329KcTWsrVXzqekbRl1091VHaQRp3ce+ylwoCCt82v2m70gJRrx
 q9stlAeRmxpmPkRtyza4uk1R7BjliAujfKeXbPwq8IoPR0q75pFTaiATPMPXucxL
 Z1bSr08WrcbZepjJpmxujdPy9m+hR5M8e9dPv6mG5MfGFgwRjZrWQ06QdJHBr1Jq
 cFgiZxRp+EaSWNrmtYxIsiFYajPdkOiPkQ5uBTGIoYaAi3MDrq+LgShoLHq+eqvq
 DmWD/Vo98GRF3xHubcbRuJZkUEWkgZS4wl0WIeaxlCYpKrzKhrr1yPkeHBqXVHiE
 y5JnY0xI4Htg4vcYcQUAXEE5u/7MTF/ydMa22iwrmCpLcAfaWZ2sJGwo76TchWmD
 FbTCyFJ4aOCqY2ALZUJYp8ONgkeqsynMNv9YL7/dY7JIRx3nKjby0QtZPf8XtFOT
 D5h+iTwSADXENDgqpE6+/76eVWYPuQmvgD0xPx+6xpqKBIJKMOe+Fi6FB3N5Brnf
 1PES5YvDT3qrb1DOtYP3QLKYFQDwbKKeu39A5i2pEHnarjJiqXTfeTDi5iZ/whLS
 SEWjfx5uexpBCmI=
 =E5XR
 -----END PGP SIGNATURE-----

Merge tag 'lsm-pr-20240215' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm

Pull lsm fix from Paul Moore:
 "One small LSM patch to fix a potential integer overflow in the newly
  added lsm_set_self_attr() syscall"

* tag 'lsm-pr-20240215' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
  lsm: fix integer overflow in lsm_set_self_attr() syscall
2024-02-16 07:58:43 -08:00
Masahiro Yamada
626db6ee8e sparc: select FRAME_POINTER instead of redefining it
Because FRAME_POINTER is defined in lib/Kconfig.debug, the arch Kconfig
should select it.

Add 'select FRAME_POINTER' to MCOUNT. ARCH_WANT_FRAME_POINTERS must
also be selected to avoid the unmet dependency warning.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/20240215135749.1909812-1-masahiroy@kernel.org
2024-02-16 16:50:26 +01:00
Randy Dunlap
5378f00c93 sparc: vDSO: fix return value of __setup handler
__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled.
A return of 0 causes the boot option/value to be listed as an Unknown
kernel parameter and added to init's (limited) argument or environment
strings. Also, error return codes don't mean anything to
obsolete_checksetup() -- only non-zero (usually 1) or zero.
So return 1 from vdso_setup().

Fixes: 9a08862a5d ("vDSO for sparc")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <izh1979@gmail.com>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Cc: "David S. Miller" <davem@davemloft.net>
Cc: sparclinux@vger.kernel.org
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Nick Alcock <nick.alcock@oracle.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/20240211052808.22635-1-rdunlap@infradead.org
2024-02-16 16:50:26 +01:00
Randy Dunlap
3ed7c61e49 sparc64: NMI watchdog: fix return value of __setup handler
__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled.
A return of 0 causes the boot option/value to be listed as an Unknown
kernel parameter and added to init's (limited) argument or environment
strings. Also, error return codes don't mean anything to
obsolete_checksetup() -- only non-zero (usually 1) or zero.
So return 1 from setup_nmi_watchdog().

Fixes: e5553a6d04 ("sparc64: Implement NMI watchdog on capable cpus.")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <izh1979@gmail.com>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Cc: "David S. Miller" <davem@davemloft.net>
Cc: sparclinux@vger.kernel.org
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/20240211052802.22612-1-rdunlap@infradead.org
2024-02-16 16:50:25 +01:00
Ricardo B. Marliere
079431ea9e sparc: vio: make vio_bus_type const
Now that the driver core can properly handle constant struct bus_type,
move the vio_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/20240204-bus_cleanup-sparc-v1-1-4ca7fe8de5f7@marliere.net
2024-02-16 16:50:25 +01:00
Bjorn Helgaas
3cc208ffa8 sparc: Fix typos
Fix typos, most reported by "codespell arch/sparc".  Only touches
comments, no code changes.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: sparclinux@vger.kernel.org
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/20240103231605.1801364-9-helgaas@kernel.org
2024-02-16 16:50:25 +01:00
Dr. David Alan Gilbert
0f1991949d sparc: Use shared font data
sparc has a 'btext' font used for the console which is almost identical
to the shared font_sun8x16, so use it rather than duplicating the data.

They were actually identical until about a decade ago when
   commit bcfbeecea1 ("drivers: console: font_: Change a glyph from
                        "broken bar" to "vertical line"")

which changed the | in the shared font to be a solid
bar rather than a broken bar.  That's the only difference.

This was originally spotted by PMD which noticed that PPC does
the same thing with the same data, and they also share a bunch
of functions to manipulate the data.

Tested very lightly with a boot without FS in qemu.

Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/20230807010914.799713-1-linux@treblig.org
2024-02-16 16:49:58 +01:00
Arnd Bergmann
e1ea6db35f wifi: brcmsmac: avoid function pointer casts
An old cleanup went a little too far and causes a warning with clang-16
and higher as it breaks control flow integrity (KCFI) rules:

drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy_shim.c:64:34: error: cast from 'void (*)(struct brcms_phy *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
   64 |                         brcms_init_timer(physhim->wl, (void (*)(void *))fn,
      |                                                       ^~~~~~~~~~~~~~~~~~~~

Change this one instance back to passing a void pointer so it can be
used with the timer callback interface.

Fixes: d89a4c8060 ("staging: brcm80211: removed void * from softmac phy")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240213100548.457854-1-arnd@kernel.org
2024-02-16 17:48:59 +02:00
Ville Syrjälä
79e2ea2eaa drm/i915/cdclk: Document CDCLK update methods
Add a bit of documentation to briefly explain the methods
by which we can change the CDCLK frequency.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240207013334.29606-5-ville.syrjala@linux.intel.com
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
2024-02-16 17:11:29 +02:00
Ville Syrjälä
c0151c695f drm/i915/cdclk: Remove the hardcoded divider from cdclk_compute_crawl_and_squash_midpoint()
cdclk_compute_crawl_and_squash_midpoint() was still assuming
that cd2x divider == 1 (ie. full divider == 2). Remove that
assumption by computing the dividers properly.

We'll also toss in a WARN in case the divider somehow ends
up different between the old and new cdclk configs. That should
never happen given we have div==2 in all the cdclk table entries
for the affected platforms.

If in the future we need a config where the divider also needs
to be changed then we likely need to add an extra step into the
cdclk programming sequence to make sure things stay within
legal limits throughout the process.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240207013334.29606-4-ville.syrjala@linux.intel.com
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
2024-02-16 17:11:20 +02:00
Ville Syrjälä
76184fa3d3 drm/i915/cdclk: Squash waveform is 16 bits
Have cdclk_squash_waveform() return a u16 since that's
how many bits we have in the waveform. We alreday use
u16 everywhere else.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240207013334.29606-3-ville.syrjala@linux.intel.com
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
2024-02-16 17:10:53 +02:00
Ville Syrjälä
26aba0d1c3 drm/i915/cdclk: Extract cdclk_divider()
Extract the cdclk divider calculation into a helper. We'll have
more users of this soon. We can now also get rid of the intermediate
'unsquashed_cdclk' variable.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240207013334.29606-2-ville.syrjala@linux.intel.com
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
2024-02-16 17:10:06 +02:00
Niklas Cassel
9266514689 PCI: endpoint: Drop only_64bit on reserved BARs
The definition of a reserved BAR is that EPF drivers should not touch
them.

The definition of only_64bit is that the EPF driver must configure this
BAR as 64-bit. (An EPF driver is not allowed to choose if this BAR should
be configured as 32-bit or 64-bit.)

Thus, it does not make sense to put only_64bit of a BAR that EPF drivers
are not allow to touch.

Drop the only_64bit property from hardware descriptions that are of type
reserved BAR.

Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Kishon Vijay Abraham I <kishon@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240216134524.1142149-3-cassel@kernel.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-02-16 20:31:10 +05:30
Niklas Cassel
e01c9797c0 PCI: endpoint: Clean up hardware description for BARs
The hardware description for BARs is scattered in many different variables
in pci_epc_features. Some of these things are mutually exclusive, so it
can create confusion over which variable that has precedence over another.

Improve the situation by creating a struct pci_epc_bar_desc, and a new
enum pci_epc_bar_type, and convert the endpoint controller drivers to use
this more well defined format.

Additionally, some endpoint controller drivers mark the BAR succeeding a
"64-bit only BAR" as reserved, while some do not. By definition, a 64-bit
BAR uses the succeeding BAR for the upper 32-bits, so an EPF driver cannot
use a BAR succeeding a 64-bit BAR. Ensure that all endpoint controller
drivers are uniform, and actually describe a reserved BAR as reserved.

Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Kishon Vijay Abraham I <kishon@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240216134524.1142149-2-cassel@kernel.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-02-16 20:30:46 +05:30
Thomas Gleixner
89b0f15f40 x86/cpu/topology: Get rid of cpuinfo::x86_max_cores
Now that __num_cores_per_package and __num_threads_per_package are
available, cpuinfo::x86_max_cores and the related math all over the place
can be replaced with the ready to consume data.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240213210253.176147806@linutronix.de
2024-02-16 15:51:32 +01:00
Lu Baolu
3dfa64aecb iommu: Make iommu_report_device_fault() return void
As the iommu_report_device_fault() has been converted to auto-respond a
page fault if it fails to enqueue it, there's no need to return a code
in any case. Make it return void.

Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240212012227.119381-17-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2024-02-16 15:19:37 +01:00
Lu Baolu
b554e396e5 iommu: Make iopf_group_response() return void
The iopf_group_response() should return void, as nothing can do anything
with the failure. This implies that ops->page_response() must also return
void; this is consistent with what the drivers do. The failure paths,
which are all integrity validations of the fault, should be WARN_ON'd,
not return codes.

If the iommu core fails to enqueue the fault, it should respond the fault
directly by calling ops->page_response() instead of returning an error
number and relying on the iommu drivers to do so. Consolidate the error
fault handling code in the core.

Co-developed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240212012227.119381-16-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2024-02-16 15:19:36 +01:00
Lu Baolu
1991123271 iommu: Track iopf group instead of last fault
Previously, before a group of page faults was passed to the domain's iopf
handler, the last page fault of the group was kept in the list of
iommu_fault_param::faults. In the page fault response path, the group's
last page fault was used to look up the list, and the page faults were
responded to device only if there was a matched fault.

The previous approach seems unnecessarily complex and not performance
friendly. Put the page fault group itself to the outstanding fault list.
It can be removed in the page fault response path or in the
iopf_queue_remove_device() path. The pending list is protected by
iommu_fault_param::lock. To allow checking for the group's presence in
the list using list_empty(), the iopf group should be removed from the
list with list_del_init().

IOMMU_PAGE_RESP_PASID_VALID is set in the code but not used anywhere.
Remove it to make the code clean. IOMMU_PAGE_RESP_PASID_VALID is set
in the response message indicating that the response message includes
a valid PASID value. Actually, we should keep this hardware detail in
the individual driver. When the page fault handling framework in IOMMU
and IOMMUFD subsystems includes a valid PASID in the fault message, the
response message should always contain the same PASID value. Individual
drivers should be responsible for deciding whether to include the PASID
in the messages they provide for the hardware.

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Yan Zhao <yan.y.zhao@intel.com>
Link: https://lore.kernel.org/r/20240212012227.119381-15-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2024-02-16 15:19:35 +01:00
Lu Baolu
0095bf8355 iommu: Improve iopf_queue_remove_device()
Convert iopf_queue_remove_device() to return void instead of an error code,
as the return value is never used. This removal helper is designed to be
never-failed, so there's no need for error handling.

Ack all outstanding page requests from the device with the response code of
IOMMU_PAGE_RESP_INVALID, indicating device should not attempt any retry.

Add comments to this helper explaining the steps involved in removing a
device from the iopf queue and disabling its PRI. The individual drivers
are expected to be adjusted accordingly. Here we just define the expected
behaviors of the individual iommu driver from the core's perspective.

Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Yan Zhao <yan.y.zhao@intel.com>
Link: https://lore.kernel.org/r/20240212012227.119381-14-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2024-02-16 15:19:34 +01:00
Lu Baolu
a74c077b90 iommu: Use refcount for fault data access
The per-device fault data structure stores information about faults
occurring on a device. Its lifetime spans from IOPF enablement to
disablement. Multiple paths, including IOPF reporting, handling, and
responding, may access it concurrently.

Previously, a mutex protected the fault data from use after free. But
this is not performance friendly due to the critical nature of IOPF
handling paths.

Refine this with a refcount-based approach. The fault data pointer is
obtained within an RCU read region with a refcount. The fault data
pointer is returned for usage only when the pointer is valid and a
refcount is successfully obtained. The fault data is freed with
kfree_rcu(), ensuring data is only freed after all RCU critical regions
complete.

An iopf handling work starts once an iopf group is created. The handling
work continues until iommu_page_response() is called to respond to the
iopf and the iopf group is freed. During this time, the device fault
parameter should always be available. Add a pointer to the device fault
parameter in the iopf_group structure and hold the reference until the
iopf_group is freed.

Make iommu_page_response() static as it is only used in io-pgfault.c.

Co-developed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Yan Zhao <yan.y.zhao@intel.com>
Link: https://lore.kernel.org/r/20240212012227.119381-13-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2024-02-16 15:19:33 +01:00
Lu Baolu
cc7338e9d8 iommu: Refine locking for per-device fault data management
The per-device fault data is a data structure that is used to store
information about faults that occur on a device. This data is allocated
when IOPF is enabled on the device and freed when IOPF is disabled. The
data is used in the paths of iopf reporting, handling, responding, and
draining.

The fault data is protected by two locks:

- dev->iommu->lock: This lock is used to protect the allocation and
  freeing of the fault data.
- dev->iommu->fault_parameter->lock: This lock is used to protect the
  fault data itself.

Apply the locking mechanism to the fault reporting and responding paths.

The fault_parameter->lock is also added in iopf_queue_discard_partial().
It does not fix any real issue, as iopf_queue_discard_partial() is only
used in the VT-d driver's prq_event_thread(), which is a single-threaded
path that reports the IOPFs.

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Yan Zhao <yan.y.zhao@intel.com>
Tested-by: Longfang Liu <liulongfang@huawei.com>
Link: https://lore.kernel.org/r/20240212012227.119381-12-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2024-02-16 15:19:32 +01:00
Lu Baolu
17c51a0ea3 iommu: Separate SVA and IOPF
Add CONFIG_IOMMU_IOPF for page fault handling framework and select it
from its real consumer. Move iopf function declaration from iommu-sva.h
to iommu.h and remove iommu-sva.h as it's empty now.

Consolidate all SVA related code into iommu-sva.c:
- Move iommu_sva_domain_alloc() from iommu.c to iommu-sva.c.
- Move sva iopf handling code from io-pgfault.c to iommu-sva.c.

Consolidate iommu_report_device_fault() and iommu_page_response() into
io-pgfault.c.

Export iopf_free_group() and iopf_group_response() for iopf handlers
implemented in modules. Some functions are renamed with more meaningful
names. No other intentional functionality changes.

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Yan Zhao <yan.y.zhao@intel.com>
Tested-by: Longfang Liu <liulongfang@huawei.com>
Link: https://lore.kernel.org/r/20240212012227.119381-11-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2024-02-16 15:19:29 +01:00
Lu Baolu
351ffcb11c iommu: Make iommu_queue_iopf() more generic
Make iommu_queue_iopf() more generic by making the iopf_group a minimal
set of iopf's that an iopf handler of domain should handle and respond
to. Add domain parameter to struct iopf_group so that the handler can
retrieve and use it directly.

Change iommu_queue_iopf() to forward groups of iopf's to the domain's
iopf handler. This is also a necessary step to decouple the sva iopf
handling code from this interface.

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Yan Zhao <yan.y.zhao@intel.com>
Tested-by: Longfang Liu <liulongfang@huawei.com>
Link: https://lore.kernel.org/r/20240212012227.119381-10-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2024-02-16 15:19:28 +01:00