Commit graph

1,294,546 commits

Author SHA1 Message Date
David Mosberger-Tang
dd2f633eaf wifi: wilc1000: validate chip id during bus probe
Previously, the driver created a net device (typically wlan0) as soon
as the module was loaded.  This commit changes the driver to follow
normal Linux convention of creating the net device only when bus
probing detects a supported chip.

Signed-off-by: David Mosberger-Tang <davidm@egauge.net>
Tested-By: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240212202057.3468714-1-davidm@egauge.net
2024-02-15 13:09:16 +02:00
Alexander Stein
5b6df373ec
arm64: dts: mediatek: Replace deprecated extcon-usb-gpio id-gpio/vbus-gpio properties
Use id-gpios and vbus-gpios instead.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240215093214.796821-3-alexander.stein@ew.tq-group.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2024-02-15 12:09:07 +01:00
Alexis Lothoré
cb5942b77c wifi: wilc1000: prevent use-after-free on vif when cleaning up all interfaces
wilc_netdev_cleanup currently triggers a KASAN warning, which can be
observed on interface registration error path, or simply by
removing the module/unbinding device from driver:

echo spi0.1 > /sys/bus/spi/drivers/wilc1000_spi/unbind

==================================================================
BUG: KASAN: slab-use-after-free in wilc_netdev_cleanup+0x508/0x5cc
Read of size 4 at addr c54d1ce8 by task sh/86

CPU: 0 PID: 86 Comm: sh Not tainted 6.8.0-rc1+ #117
Hardware name: Atmel SAMA5
 unwind_backtrace from show_stack+0x18/0x1c
 show_stack from dump_stack_lvl+0x34/0x58
 dump_stack_lvl from print_report+0x154/0x500
 print_report from kasan_report+0xac/0xd8
 kasan_report from wilc_netdev_cleanup+0x508/0x5cc
 wilc_netdev_cleanup from wilc_bus_remove+0xc8/0xec
 wilc_bus_remove from spi_remove+0x8c/0xac
 spi_remove from device_release_driver_internal+0x434/0x5f8
 device_release_driver_internal from unbind_store+0xbc/0x108
 unbind_store from kernfs_fop_write_iter+0x398/0x584
 kernfs_fop_write_iter from vfs_write+0x728/0xf88
 vfs_write from ksys_write+0x110/0x1e4
 ksys_write from ret_fast_syscall+0x0/0x1c

[...]

Allocated by task 1:
 kasan_save_track+0x30/0x5c
 __kasan_kmalloc+0x8c/0x94
 __kmalloc_node+0x1cc/0x3e4
 kvmalloc_node+0x48/0x180
 alloc_netdev_mqs+0x68/0x11dc
 alloc_etherdev_mqs+0x28/0x34
 wilc_netdev_ifc_init+0x34/0x8ec
 wilc_cfg80211_init+0x690/0x910
 wilc_bus_probe+0xe0/0x4a0
 spi_probe+0x158/0x1b0
 really_probe+0x270/0xdf4
 __driver_probe_device+0x1dc/0x580
 driver_probe_device+0x60/0x140
 __driver_attach+0x228/0x5d4
 bus_for_each_dev+0x13c/0x1a8
 bus_add_driver+0x2a0/0x608
 driver_register+0x24c/0x578
 do_one_initcall+0x180/0x310
 kernel_init_freeable+0x424/0x484
 kernel_init+0x20/0x148
 ret_from_fork+0x14/0x28

Freed by task 86:
 kasan_save_track+0x30/0x5c
 kasan_save_free_info+0x38/0x58
 __kasan_slab_free+0xe4/0x140
 kfree+0xb0/0x238
 device_release+0xc0/0x2a8
 kobject_put+0x1d4/0x46c
 netdev_run_todo+0x8fc/0x11d0
 wilc_netdev_cleanup+0x1e4/0x5cc
 wilc_bus_remove+0xc8/0xec
 spi_remove+0x8c/0xac
 device_release_driver_internal+0x434/0x5f8
 unbind_store+0xbc/0x108
 kernfs_fop_write_iter+0x398/0x584
 vfs_write+0x728/0xf88
 ksys_write+0x110/0x1e4
 ret_fast_syscall+0x0/0x1c
 [...]

David Mosberger-Tan initial investigation [1] showed that this
use-after-free is due to netdevice unregistration during vif list
traversal. When unregistering a net device, since the needs_free_netdev has
been set to true during registration, the netdevice object is also freed,
and as a consequence, the corresponding vif object too, since it is
attached to it as private netdevice data. The next occurrence of the loop
then tries to access freed vif pointer to the list to move forward in the
list.

Fix this use-after-free thanks to two mechanisms:
- navigate in the list with list_for_each_entry_safe, which allows to
  safely modify the list as we go through each element. For each element,
  remove it from the list with list_del_rcu
- make sure to wait for RCU grace period end after each vif removal to make
  sure it is safe to free the corresponding vif too (through
  unregister_netdev)

Since we are in a RCU "modifier" path (not a "reader" path), and because
such path is expected not to be concurrent to any other modifier (we are
using the vif_mutex lock), we do not need to use RCU list API, that's why
we can benefit from list_for_each_entry_safe.

[1] https://lore.kernel.org/linux-wireless/ab077dbe58b1ea5de0a3b2ca21f275a07af967d2.camel@egauge.net/

Fixes: 8399918f30 ("staging: wilc1000: use RCU list to maintain vif interfaces list")
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240212-wilc_rework_deinit-v1-1-9203ae56c27f@bootlin.com
2024-02-15 13:08:55 +02:00
Vadim Fedorenko
488b6d91b0 net-timestamp: make sk_tskey more predictable in error path
When SOF_TIMESTAMPING_OPT_ID is used to ambiguate timestamped datagrams,
the sk_tskey can become unpredictable in case of any error happened
during sendmsg(). Move increment later in the code and make decrement of
sk_tskey in error path. This solution is still racy in case of multiple
threads doing snedmsg() over the very same socket in parallel, but still
makes error path much more predictable.

Fixes: 09c2d251b7 ("net-timestamp: add key to disambiguate concurrent datagrams")
Reported-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240213110428.1681540-1-vadfed@meta.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-15 12:04:04 +01:00
Robert Marko
3be0d950b6 net: phy: qca807x: move interface mode check to .config_init_once
Currently, we are checking whether the PHY package mode matches the
individual PHY interface modes at PHY package probe time, but at that time
we only know the PHY package mode and not the individual PHY interface
modes as of_get_phy_mode() that populates it will only get called once the
netdev to which PHY-s are attached to is being probed and thus this check
will always fail and return -EINVAL.

So, lets move this check to .config_init_once as at that point individual
PHY interface modes should be populated.

Fixes: d1cb613efb ("net: phy: qcom: add support for QCA807x PHY Family")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240212115043.1725918-1-robimarko@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-15 11:27:53 +01:00
Lukas Bulwahn
0955723ef9 sparc: remove obsolete config ARCH_ATU
Before consolidation of commit 4965a68780 ("arch: define the
ARCH_DMA_ADDR_T_64BIT config symbol in lib/Kconfig"), the config ARCH_ATU
was used to control the state of the config ARCH_DMA_ADDR_T_64BIT. After
this consolidation, the config ARCH_ATU has been without use and effect.

Remove this obsolete config.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/20231211083029.22078-1-lukas.bulwahn@gmail.com
2024-02-15 11:27:14 +01:00
Johannes Berg
f78c137533 wifi: nl80211: reject iftype change with mesh ID change
It's currently possible to change the mesh ID when the
interface isn't yet in mesh mode, at the same time as
changing it into mesh mode. This leads to an overwrite
of data in the wdev->u union for the interface type it
currently has, causing cfg80211_change_iface() to do
wrong things when switching.

We could probably allow setting an interface to mesh
while setting the mesh ID at the same time by doing a
different order of operations here, but realistically
there's no userspace that's going to do this, so just
disallow changes in iftype when setting mesh ID.

Cc: stable@vger.kernel.org
Fixes: 29cbe68c51 ("cfg80211/mac80211: add mesh join/leave commands")
Reported-by: syzbot+dd4779978217b1973180@syzkaller.appspotmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-15 11:00:37 +01:00
Johannes Berg
414532d8aa wifi: cfg80211: use IEEE80211_MAX_MESH_ID_LEN appropriately
Even if that's the same as IEEE80211_MAX_SSID_LEN, we really
should just use IEEE80211_MAX_MESH_ID_LEN for mesh, rather
than having the BUILD_BUG_ON()s.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-15 10:59:08 +01:00
Miri Korenblit
7777018992 wifi: iwlwifi: cancel session protection only if there is one
mac80211 might (due to an unavoidable race) cancel a ROC that has already
expired. In that case the driver should not send the session protection
cmd to cancel the ROC.
When session protection is supported, the te_data::id field is reused
to save the configuration id. Check it before sending the cmd.

Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240205211151.30176bf869d9.Id811c20d3746b870cbe0c946bbfe1c0ab0a290cb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-15 10:58:36 +01:00
Miri Korenblit
35c1bbd93c wifi: iwlwifi: mvm: remove IWL_MVM_STATUS_NEED_FLUSH_P2P
This is set when a P2P ROC ends, and uses as an indication inside
iwl_mvm_roc_done_wk that the resources used for this ROC (sta/link)
needs to be flushed/deactivated (respectively).
But we also have IWL_MVM_STATUS_ROC_RUNNING, which is set whenever
P2P ROC starts, and is not even used in iwl_mvm_roc_done_wk.
Use IWL_MVM_STATUS_ROC_RUNNING as an indicator, and remove the redundant
bit.
While at it, add a call to synchronize_net also for the
AUX ROC case, which is missing in the existing code.

Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240205211151.0494f75de311.Ic4aacacf7581a5c9046c4f1df87cbb67470853e7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-15 10:58:36 +01:00
Biju Das
6bcff5f958 media: platform: rzg2l-cru: rzg2l-video: Fix start reception procedure
As per section 35.3.1 Starting Reception for the MIPI CSI-2 Input on the
latest hardware manual (R01UH0914EJ0145 Rev.1.45) we need to supply all
the clocks and then release the CRU resets. Currently we are releasing
the resets and then supplying the clocks. So, fix the start reception
procedure.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20240213181233.242316-6-biju.das.jz@bp.renesas.com
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-02-15 10:57:54 +01:00
Biju Das
fdc7bd5b3a media: platform: rzg2l-cru: rzg2l-csi2: Restructure vclk handling
As per section 35.3.1 Starting Reception for the MIPI CSI-2 Input on the
latest hardware manual (R01UH0914EJ0145 Rev.1.45) we need to disable the
vclk before enabling the LINK reception and enable the vclk after enabling
the link Reception. So restructure vclk handling as per the HW manual.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20240213181233.242316-5-biju.das.jz@bp.renesas.com
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-02-15 10:57:54 +01:00
Biju Das
2767394855 media: platform: rzg2l-cru: rzg2l-video: Fix image processing initialization
As per section 35.3.1 Starting Reception for the MIPI CSI-2 Input on the
latest hardware manual (R01UH0914EJ0140 Rev.1.40) it is mentioned that
initialize the AXI master first and then initialize the image processing.
Fix the start procedure as per the hardware manual.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20240213181233.242316-4-biju.das.jz@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-02-15 10:57:54 +01:00
Biju Das
9c7fa014ca media: platform: rzg2l-cru: rzg2l-ip: Add delay after D-PHY reset
As per section 35.3.1 Starting Reception for the MIPI CSI-2 Input on the
latest hardware manual (R01UH0914EJ0140 Rev.1.40) it is mentioned that
after DPHY reset, we need to wait for 1 msec or more before start
receiving data from the sensor. So add a delay after pre_streamon().

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20240213181233.242316-3-biju.das.jz@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-02-15 10:57:54 +01:00
Biju Das
f243df0a0b media: platform: rzg2l-cru: rzg2l-csi2: Switch to RUNTIME_PM_OPS()
Replace the old SET_RUNTIME_PM_OPS() helpers with its modern alternative
RUNTIME_PM_OPS(). The usage of pm_ptr and RUNTIME_PM_OPS() allows the
compiler to see where it's used but still drop the dead code. After this
we can get rid of the unnecessary '__maybe_unused' annotations on PM
functions.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20240213181233.242316-2-biju.das.jz@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-02-15 10:57:54 +01:00
Johannes Berg
cd882e2fb2 Merge wireless into wireless-next
There's a conflict already and some upcoming changes
also depend on changes in wireless for being conflict-
free, so pull wireless in to make all that easier.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-15 09:56:42 +01:00
Arnd Bergmann
455dae7549 drm/xe: avoid function cast warnings
clang-16 warns about a cast between incompatible function types:

drivers/gpu/drm/xe/xe_range_fence.c:155:10: error: cast from 'void (*)(const void *)' to 'void (*)(struct xe_range_fence *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
  155 |         .free = (void (*)(struct xe_range_fence *rfence)) kfree,
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Avoid this with a trivial helper function that calls kfree() here.

v2:
- s/* rfence/*rfence/ (Thomas)

Fixes: 845f64bdbf ("drm/xe: Introduce a range-fence utility")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240213095719.454865-1-arnd@kernel.org
(cherry picked from commit f2c9364db5)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2024-02-15 09:53:38 +01:00
Thomas Hellström
8cb92dc730 drm/xe/pt: Allow for stricter type- and range checking
Distinguish between xe_pt and the xe_pt_dir subclass when
allocating and freeing. Also use a fixed-size array for the
xe_pt_dir page entries to make life easier for dynamic range-
checkers. Finally rename the page-directory child pointer array
to "children".

While no functional change, this fixes ubsan splats similar to:

[   51.463021] ------------[ cut here ]------------
[   51.463022] UBSAN: array-index-out-of-bounds in drivers/gpu/drm/xe/xe_pt.c:47:9
[   51.463023] index 0 is out of range for type 'xe_ptw *[*]'
[   51.463024] CPU: 5 PID: 2778 Comm: xe_vm Tainted: G     U             6.8.0-rc1+ #218
[   51.463026] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 2001 02/01/2023
[   51.463027] Call Trace:
[   51.463028]  <TASK>
[   51.463029]  dump_stack_lvl+0x47/0x60
[   51.463030]  __ubsan_handle_out_of_bounds+0x95/0xd0
[   51.463032]  xe_pt_destroy+0xa5/0x150 [xe]
[   51.463088]  __xe_pt_unbind_vma+0x36c/0x9b0 [xe]
[   51.463144]  xe_vm_unbind+0xd8/0x580 [xe]
[   51.463204]  ? drm_exec_prepare_obj+0x3f/0x60 [drm_exec]
[   51.463208]  __xe_vma_op_execute+0x5da/0x910 [xe]
[   51.463268]  ? __drm_gpuvm_sm_unmap+0x1cb/0x220 [drm_gpuvm]
[   51.463272]  ? radix_tree_node_alloc.constprop.0+0x89/0xc0
[   51.463275]  ? drm_gpuva_it_remove+0x1f3/0x2a0 [drm_gpuvm]
[   51.463279]  ? drm_gpuva_remove+0x2f/0xc0 [drm_gpuvm]
[   51.463283]  xe_vm_bind_ioctl+0x1a55/0x20b0 [xe]
[   51.463344]  ? __pfx_xe_vm_bind_ioctl+0x10/0x10 [xe]
[   51.463414]  drm_ioctl_kernel+0xb6/0x120
[   51.463416]  drm_ioctl+0x287/0x4e0
[   51.463418]  ? __pfx_xe_vm_bind_ioctl+0x10/0x10 [xe]
[   51.463481]  __x64_sys_ioctl+0x94/0xd0
[   51.463484]  do_syscall_64+0x86/0x170
[   51.463486]  ? syscall_exit_to_user_mode+0x7d/0x200
[   51.463488]  ? do_syscall_64+0x96/0x170
[   51.463490]  ? do_syscall_64+0x96/0x170
[   51.463492]  entry_SYSCALL_64_after_hwframe+0x6e/0x76
[   51.463494] RIP: 0033:0x7f246bfe817d
[   51.463498] Code: 04 25 28 00 00 00 48 89 45 c8 31 c0 48 8d 45 10 c7 45 b0 10 00 00 00 48 89 45 b8 48 8d 45 d0 48 89 45 c0 b8 10 00 00 00 0f 05 <89> c2 3d 00 f0 ff ff 77 1a 48 8b 45 c8 64 48 2b 04 25 28 00 00 00
[   51.463501] RSP: 002b:00007ffc1bd19ad0 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[   51.463502] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f246bfe817d
[   51.463504] RDX: 00007ffc1bd19b60 RSI: 0000000040886445 RDI: 0000000000000003
[   51.463505] RBP: 00007ffc1bd19b20 R08: 0000000000000000 R09: 0000000000000000
[   51.463506] R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffc1bd19b60
[   51.463508] R13: 0000000040886445 R14: 0000000000000003 R15: 0000000000010000
[   51.463510]  </TASK>
[   51.463517] ---[ end trace ]---

v2
- Fix kerneldoc warning (Matthew Brost)

Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240209112655.4872-1-thomas.hellstrom@linux.intel.com
(cherry picked from commit 157261c58b)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2024-02-15 09:53:18 +01:00
Matthew Auld
c2626b7387 drm/xe/display: fix i915_gem_object_is_shmem() wrapper
shmem ensures the memory is cleared on allocation, however here we are
using TTM, which doesn't natively support shmem (other than for swap),
but instead just allocates normal system memory. And we only zero such
memory for userspace allocations. In the case of intel_fbdev we are
missing the memset_io() since display path incorrectly thinks object is
shmem based.

Fixes: 44e694958b ("drm/xe/display: Implement display support")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240205153110.38340-2-matthew.auld@intel.com
(cherry picked from commit 63fb531fbf)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2024-02-15 09:53:11 +01:00
Thomas Hellström
9377de4cb3 drm/xe/vm: Avoid reserving zero fences
The function xe_vm_prepare_vma was blindly accepting zero as the
number of fences and forwarded that to drm_exec_prepare_obj.

However, that leads to an out-of-bounds shift in the
dma_resv_reserve_fences() and while one could argue that the
dma_resv code should be robust against that, avoid attempting
to reserve zero fences.

Relevant stack trace:

[773.183188] ------------[ cut here ]------------
[773.183199] UBSAN: shift-out-of-bounds in ../include/linux/log2.h:57:13
[773.183241] shift exponent 64 is too large for 64-bit type 'long unsigned int'
[773.183254] CPU: 2 PID: 1816 Comm: xe_evict Tainted: G     U             6.8.0-rc3-xe #1
[773.183256] Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 2014 10/14/2022
[773.183257] Call Trace:
[773.183258]  <TASK>
[773.183260]  dump_stack_lvl+0xaf/0xd0
[773.183266]  dump_stack+0x10/0x20
[773.183283]  ubsan_epilogue+0x9/0x40
[773.183286]  __ubsan_handle_shift_out_of_bounds+0x10f/0x170
[773.183293]  dma_resv_reserve_fences.cold+0x2b/0x48
[773.183295]  ? ww_mutex_lock+0x3c/0x110
[773.183301]  drm_exec_prepare_obj+0x45/0x60 [drm_exec]
[773.183313]  xe_vm_prepare_vma+0x33/0x70 [xe]
[773.183375]  xe_vma_destroy_unlocked+0x55/0xa0 [xe]
[773.183427]  xe_vm_close_and_put+0x526/0x940 [xe]

Fixes: 2714d50936 ("drm/xe: Convert pagefaulting code to use drm_exec")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240208132115.3132-1-thomas.hellstrom@linux.intel.com
(cherry picked from commit eb538b5574)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2024-02-15 09:53:00 +01:00
Arnd Bergmann
3093fa3353 cpufreq: qcom-hw: add CONFIG_COMMON_CLK dependency
It is still possible to compile-test a kernel without CONFIG_COMMON_CLK
for some ancient ARM boards or other architectures, but this causes a
link failure in the qcom-cpufreq-hw driver:

ERROR: modpost: "devm_clk_hw_register" [drivers/cpufreq/qcom-cpufreq-hw.ko] undefined!
ERROR: modpost: "devm_of_clk_add_hw_provider" [drivers/cpufreq/qcom-cpufreq-hw.ko] undefined!
ERROR: modpost: "of_clk_hw_onecell_get" [drivers/cpufreq/qcom-cpufreq-hw.ko] undefined!

Add a Kconfig dependency here to make sure this always work. Apparently
this bug has been in the kernel for a while without me running into it
on randconfig builds as COMMON_CLK is almost always enabled.

I have cross-checked by building an allmodconfig kernel with COMMON_CLK
disabled, which showed no other driver having this problem.

Fixes: 4370232c72 ("cpufreq: qcom-hw: Add CPU clock provider support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2024-02-15 14:08:23 +05:30
Arnd Bergmann
f2c9364db5 drm/xe: avoid function cast warnings
clang-16 warns about a cast between incompatible function types:

drivers/gpu/drm/xe/xe_range_fence.c:155:10: error: cast from 'void (*)(const void *)' to 'void (*)(struct xe_range_fence *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
  155 |         .free = (void (*)(struct xe_range_fence *rfence)) kfree,
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Avoid this with a trivial helper function that calls kfree() here.

v2:
- s/* rfence/*rfence/ (Thomas)

Fixes: 845f64bdbf ("drm/xe: Introduce a range-fence utility")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240213095719.454865-1-arnd@kernel.org
2024-02-15 09:33:25 +01:00
Kent Gibson
8ff0d55ba3 gpio: uapi: clarify default_values being logical
The documentation for default_values mentions high/low which can be
confusing, particularly when the ACTIVE_LOW flag is set.

Replace high/low with active/inactive to clarify that the values are
logical not physical.

Similarly, clarify the interpretation of values in struct gpiohandle_data.

Signed-off-by: Kent Gibson <warthog618@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2024-02-15 08:44:57 +01:00
Bartosz Golaszewski
be91c19e47 gpio: sysfs: fix inverted pointer logic
The logic is inverted, we want to return if the chip *IS* NULL.

Fixes: d83cee3d2b ("gpio: protect the pointer to gpio_chip in gpio_device with SRCU")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-gpio/15671341-0b29-40e0-b487-0a4cdc414d8e@moroto.mountain/
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2024-02-15 08:40:40 +01:00
Bartosz Golaszewski
0d7fa0eda4 gpio: don't let lockdep complain about inherently dangerous RCU usage
There are two legacy, deprecated functions - gpiod_to_chip() and
gpio_device_get_chip() - that still have users in tree. They return the
address of the SRCU-protected chip outside of the read-only critical
sections. They are inherently dangerous and the users should convert to
safer alternatives. Let's explicitly silence lockdep warnings by using
rcu_dereference_check(ptr, 1). While at it: reuse
gpio_device_get_chip() in gpiod_to_chip().

Fixes: d83cee3d2b ("gpio: protect the pointer to gpio_chip in gpio_device with SRCU")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202402122234.d85cca9b-lkp@intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2024-02-15 08:39:29 +01:00
Bartosz Golaszewski
d82b9e0887 gpio: use srcu_dereference() with SRCU-protected pointers
Lockdep with CONFIG_PROVE_RCU enabled reports false positives about
suspicious rcu_dereference() usage. Let's silence it by using
srcu_dereference() which is the correct helper with SRCU.

Fixes: d83cee3d2b ("gpio: protect the pointer to gpio_chip in gpio_device with SRCU")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202402122234.d85cca9b-lkp@intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
2024-02-15 08:39:25 +01:00
Bartosz Golaszewski
8574b5b476 gpio: cdev: use correct pointer accessors with SRCU
We never dereference the chip pointer in character device code so we can
use the lighter rcu_access_pointer() helper. This also makes lockep
happier as it no longer complains about suspicious rcu_dereference()
usage.

Fixes: d83cee3d2b ("gpio: protect the pointer to gpio_chip in gpio_device with SRCU")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202402122234.d85cca9b-lkp@intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
2024-02-15 08:39:18 +01:00
Bartosz Golaszewski
815a1b5a6d gpio: take the SRCU read lock in gpiod_hog()
gpiod_hog() may be called without the gpio_device SRCU read lock taken
so we need to do it here as well. It's alright if someone else is
already holding the lock as SRCU read critical sections can be nested.

Fixes: d83cee3d2b ("gpio: protect the pointer to gpio_chip in gpio_device with SRCU")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202402122234.d85cca9b-lkp@intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
2024-02-15 08:39:13 +01:00
Richard Acayan
032b149bcc cpufreq: dt-platdev: block SDM670 in cpufreq-dt-platdev
The Snapdragon 670 uses the Qualcomm driver for CPU frequency scaling.
Block this driver from loading on it so the driver does not pollute
dmesg with an error.

Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2024-02-15 12:58:39 +05:30
Matti Lehtimäki
9e9c906ede ARM: dts: qcom: msm8226: Add watchdog node
Add watchdog for MSM8226 platform.

Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20240214-msm8226-msm8974-watchdog-v2-1-a6b2f27a7e28@z3ntu.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-02-14 20:20:50 -06:00
Jakub Kicinski
2ec197fda2 selftests: tls: increase the wait in poll_partial_rec_async
Test runners on debug kernels occasionally fail with:

 # #  RUN           tls_err.13_aes_gcm.poll_partial_rec_async ...
 # # tls.c:1883:poll_partial_rec_async:Expected poll(&pfd, 1, 5) (0) == 1 (1)
 # # tls.c:1870:poll_partial_rec_async:Expected status (256) == 0 (0)
 # # poll_partial_rec_async: Test failed at step #17
 # #          FAIL  tls_err.13_aes_gcm.poll_partial_rec_async
 # not ok 699 tls_err.13_aes_gcm.poll_partial_rec_async
 # # FAILED: 698 / 699 tests passed.

This points to the second poll() in the test which is expected
to wait for the sender to send the rest of the data.
Apparently under some conditions that doesn't happen within 5ms,
bump the timeout to 20ms.

Fixes: 23fcb62bc1 ("selftests: tls: add tests for poll behavior")
Link: https://lore.kernel.org/r/20240213142055.395564-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-14 18:02:02 -08:00
Dave Ertman
dadd1701ae ice: Add check for lport extraction to LAG init
To fully support initializing the LAG support code, a DDP package that
extracts the logical port from the metadata is required.  If such a
package is not present, there could be difficulties in supporting some
bond types.

Add a check into the initialization flow that will bypass the new paths
if any of the support pieces are missing.

Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Fixes: df006dd4b1 ("ice: Add initial support framework for LAG")
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20240213183957.1483857-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-14 17:58:45 -08:00
Marc Zyngier
9aa030cee1 arm64: cpufeatures: Fix FEAT_NV check when checking for FEAT_NV1
Using this_cpu_has_cap() has the potential to go wrong when
used system-wide on a preemptible kernel. Instead, use the
__system_matches_cap() helper when checking for FEAT_NV in the
FEAT_NV1 probing helper.

Fixes: 3673d01a2f ("arm64: cpufeatures: Only check for NV1 if NV is present")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/kvmarm/86bk8k5ts3.wl-maz@kernel.org/
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2024-02-15 01:58:03 +00:00
Jakub Kicinski
63a3dd6e62 Valentine's day edition, with just few fixes because
that's how we love it ;-)
 
 iwlwifi:
  - correct A3 in A-MSDUs
  - fix crash when operating as AP and running out of station
    slots to use
  - clear link ID to correct some later checks against it
  - fix error codes in SAR table loading
  - fix error path in PPAG table read
 
 mac80211:
  - reload a pointer after SKB may have changed
    (only in certain monitor inject mode scenarios)
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEpeA8sTs3M8SN2hR410qiO8sPaAAFAmXNCSMACgkQ10qiO8sP
 aAA79A//SAXDwnnfJDa+F57aqFFSQSs+y+4D01NgWsJkVSHVF9JJMowsCvWZ2lhz
 NXaBtONTzwMjDVxnMaEQgqBMNH7HXWzxqi7twvDCbHYFPyJzInWcCPokpsfQ9/Tc
 5n0yPcUuUwDdO1I06CxAdvBU26I9nMIvI353DuhdGRaZdH85isTDgW35T2G3TD3w
 ratlmHoIYUe7cjvhJs/6p4R7quBSLT74mqIs00l3mtlyRKhdVGR+Tl3YwCfmUb+F
 V/vQo13O04QnC2QOzEAz//PUj1Rm9XXCaiWQHKs8QyVM4opFQADhrKLRQjkqu/3p
 KOaJPxJEr2NnTuuFWyfj78k+zV8tMSvfXcRwVPO/ZtXow6CtYtV4h09FK8xdpkJK
 rkrQ06Up111sS8uDJrzWRlREBM/JTOIZHkLGF7ZkQK3ICVZPi1vGg8MbQjuM8lnd
 Oc95eOn4BTC0lua3L65f/C/UQpSXr+vqKTq+xOsybxnWmLJBcFSWOIqeaLJTblsi
 YiZwowlpxoFC/UCEzTsSTRKbjETb590oyJqeg0pchdUT50x9ZiBfo094sdovrKqE
 eJDiiDiXWPIB1Cf+ic8iP6T6C0Qsv8zq+GZtyIMZ0ZAkywdUOTMNst8UA9LRstx4
 AlvMRfOM9aJhSDmvDk/Nheff9mjIsJYjZ+U09wLRXOJO1Yse4VU=
 =h/fM
 -----END PGP SIGNATURE-----

Merge tag 'wireless-2024-02-14' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless

Johannes Berg says:

====================
Valentine's day edition, with just few fixes because
that's how we love it ;-)

iwlwifi:
 - correct A3 in A-MSDUs
 - fix crash when operating as AP and running out of station
   slots to use
 - clear link ID to correct some later checks against it
 - fix error codes in SAR table loading
 - fix error path in PPAG table read

mac80211:
 - reload a pointer after SKB may have changed
   (only in certain monitor inject mode scenarios)

* tag 'wireless-2024-02-14' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
  wifi: iwlwifi: mvm: fix a crash when we run out of stations
  wifi: iwlwifi: uninitialized variable in iwl_acpi_get_ppag_table()
  wifi: iwlwifi: Fix some error codes
  wifi: iwlwifi: clear link_id in time_event
  wifi: iwlwifi: mvm: use correct address 3 in A-MSDU
  wifi: mac80211: reload info pointer in ieee80211_tx_dequeue()
====================

Link: https://lore.kernel.org/r/20240214184326.132813-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-14 17:32:37 -08:00
Jens Axboe
a37ee9e117 io_uring/net: fix multishot accept overflow handling
If we hit CQ ring overflow when attempting to post a multishot accept
completion, we don't properly save the result or return code. This
results in losing the accepted fd value.

Instead, we return the result from the poll operation that triggered
the accept retry. This is generally POLLIN|POLLPRI|POLLRDNORM|POLLRDBAND
which is 0xc3, or 195, which looks like a valid file descriptor, but it
really has no connection to that.

Handle this like we do for other multishot completions - assign the
result, and return IOU_STOP_MULTISHOT to cancel any further completions
from this request when overflow is hit. This preserves the result, as we
should, and tells the application that the request needs to be re-armed.

Cc: stable@vger.kernel.org
Fixes: 515e269612 ("io_uring: revert "io_uring fix multishot accept ordering"")
Link: https://github.com/axboe/liburing/issues/1062
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-02-14 18:30:19 -07:00
John Harrison
eb927f01df drm/i915/gt: Restart the heartbeat timer when forcing a pulse
The context persistence code does things like send super high priority
heartbeat pulses to ensure any leaked context can still be pre-empted
and thus isn't a total denial of service but only a minor denial of
service. Unfortunately, it wasn't bothering to restart the heartbeat
worker with a fresh timeout. Thus, if a persistent context happened to
be closed just before the heartbeat was going to go ping anyway then
the forced pulse would get a negligble execution time. And as the
forced pulse is super high priority, the worker thread's next step is
a reset. Which means a potentially innocent system randomly goes boom
when attempting to close a context. So, force a re-schedule of the
worker thread with the appropriate timeout.

Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240110210216.4125092-1-John.C.Harrison@Intel.com
2024-02-14 17:17:35 -08:00
Linus Torvalds
8d3dea2100 - Fix for broken ipv6 checksums
- Fix handling of exceptions in delay slots
 -----BEGIN PGP SIGNATURE-----
 
 iQJNBAABCAA4FiEEbt46xwy6kEcDOXoUeZbBVTGwZHAFAmXM750aHHRzYm9nZW5k
 QGFscGhhLmZyYW5rZW4uZGUACgkQeZbBVTGwZHBzqw/42RQuAgNvkSNd6r6+CUuG
 leoALrTwYU0PmQGSEROJygocnALqBPpOrcaVY35v//esSw+PdvfQE+ZcYsXO+keA
 oTbrnGHi3zH909Yt0QsnxjqCOKgkJCPG+euXnosQM7xWM40bCCXisQr+UoIA9XRr
 GGYVEaKtMkJgJVSfrlh+5NRLpRpNXZ2ocs865vJYsPYs8w54B6Kdr33mIA5vj2d4
 wLI/N7/Nnh3oO6uLpG1ORkLjJvxG4tQXCUrstwTMPp6wUyfb8dwQthfAwRl2NhSI
 PQs8IPAJKuW8+YHO4cPaLoZgsv7jhxHHdkuvKMiZKu2baZUqW1tP4TxJJsgaCPb2
 IbazBHr771CAkOvgcZ0WtaqHMtxI206PB2+JRAvxtoMU5q+FyDgJLcJwc0t950K0
 owRQY4XREFsmkpvOJYVciGJ4fwQenqWoF+j2fL7ps/ErsqGfvx6UkV+zBmlqdcVB
 hj5diLa4pmWMg8zqx0QKNq2SaL7eRsSwu0LS2bkL62Q+90TZlq3+Zj2sZQlbLvRO
 BKDqTUGcHP/DI8jeMjHbHxWplgjzbfZ3usgAODVCuglikDgLkiWQnhZWxm/71meh
 iSx1B54PWjNxE5GXWznBendBXMds8WRgJV6vN1/SZcftEhhukmjCzZVFuz/p1eon
 Wo+5sCroc8W3p54W4ABPJw==
 =mCom
 -----END PGP SIGNATURE-----

Merge tag 'mips-fixes_6.8_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS fixes from Thomas Bogendoerfer:

 - Fix for broken ipv6 checksums

 - Fix handling of exceptions in delay slots

* tag 'mips-fixes_6.8_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  mm/memory: Use exception ip to search exception tables
  MIPS: Clear Cause.BD in instruction_pointer_set
  ptrace: Introduce exception_ip arch hook
  MIPS: Add 'memory' clobber to csum_ipv6_magic() inline assembler
2024-02-14 16:06:31 -08:00
Linus Torvalds
6004b044f7 Landlock fixes for v6.8-rc5
-----BEGIN PGP SIGNATURE-----
 
 iIYEABYKAC4WIQSVyBthFV4iTW/VU1/l49DojIL20gUCZczJSxAcbWljQGRpZ2lr
 b2QubmV0AAoJEOXj0OiMgvbSHrMBAOfb5uIFGpf7JNlmpDp42y2wD19hxAtv9eWr
 ZcJecmhMAQCWAMDfl2D3HxSMQ40QIPGSPr+lMhTvnBa8UoXEpqCUDQ==
 =7nhu
 -----END PGP SIGNATURE-----

Merge tag 'landlock-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux

Pull landlock test fixes from Mickaël Salaün:
 "Fix build issues for tests, and improve test compatibility"

* tag 'landlock-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
  selftests/landlock: Fix capability for net_test
  selftests/landlock: Fix fs_test build with old libc
  selftests/landlock: Fix net_test build with old libc
2024-02-14 16:02:36 -08:00
Linus Torvalds
1f3a3e2aae for-6.8-rc4-tag
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAmXMewsACgkQxWXV+ddt
 WDtFUBAAkEU/hxB4YsLn2JEdp3wc80w5/qKkPaYHsI2ncvc3RFiG+tqSY7BakMgE
 Kkdl8ouNX3p/S62ykIBQTKZnOTk7FgKlClAQtgKn1afexqABsP2mifnh40Dzf7eA
 VvEl7chnRT6oeivtQkB+BtgOzaOUp4j/8oAivRN8NKNwTxojV4g9PErKSOWfVQSq
 3zlrLJbe6era43SpnexkjZHn4Fy4CN+C7FMm+pT/yKzZi2oBZs9BvNZGhIkdnzcK
 MftrY9dSGO3CDD2Kvrz3lEm7ZB83wCpm+GTDN7iJx2y+yeW+aHjshFkJr1ApEZQa
 lsWTnj3hk3yHoOPUuLlchw5JcFb/dFZ1Ztdwkunf8nmt5a3O/5Zf+Csgze8c+Iii
 MJQKi0B/bNQ7cSEwRt36s75kROBItZmHCZmSBlOpT1LXSDQMJ9lvEnv/fPQdcHHF
 WMEmk5O5IoGYv5kx5wIoWv27HKE/bDwH6RjkxEd/n17XP+PcfHY4K0o0CGtfwS8g
 hdy9RI9X8dbf3ZPrxtsgQ2T8btWs68A4S6nwcSuY5HK0WNmvRh47eLfCI6S6XGJs
 hHkppLcc+WTXOskCA+ABdm9hgeAPZkCSpuQSmC2HBt8gRv8XqO7z4cZ/up2N+tES
 ZOJSrJb97nusOcxY0pLexnD6eI3pQxzGMiPONlC1Re8CdjZ0l+4=
 =RRGT
 -----END PGP SIGNATURE-----

Merge tag 'for-6.8-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:
 "A few regular fixes and one fix for space reservation regression since
  6.7 that users have been reporting:

   - fix over-reservation of metadata chunks due to not keeping proper
     balance between global block reserve and delayed refs reserve; in
     practice this leaves behind empty metadata block groups, the
     workaround is to reclaim them by using the '-musage=1' balance
     filter

   - other space reservation fixes:
      - do not delete unused block group if it may be used soon
      - do not reserve space for checksums for NOCOW files

   - fix extent map assertion failure when writing out free space inode

   - reject encoded write if inode has nodatasum flag set

   - fix chunk map leak when loading block group zone info"

* tag 'for-6.8-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: don't refill whole delayed refs block reserve when starting transaction
  btrfs: zoned: fix chunk map leak when loading block group zone info
  btrfs: reject encoded write if inode has nodatasum flag set
  btrfs: don't reserve space for checksums when writing to nocow files
  btrfs: add new unused block groups to the list of unused block groups
  btrfs: do not delete unused block group if it may be used soon
  btrfs: add and use helper to check if block group is used
  btrfs: don't drop extent_map for free space inode on write error
2024-02-14 15:47:02 -08:00
Ville Syrjälä
1b923307a1 drm/i915: Enable fastboot across the board
There's nothing magical about vlv+ platforms vs. fastboot.
If it works somewhere it should work everywhere, assuming
we've not missed any crucial state checks. That seems unlikely
on older platforms with less state to check anyway.

Just enable fastboot across the board, and the remove the
remnants of the optional stuff (we already removed the
modparam for fastboot anyway).

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240209183809.16887-6-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
2024-02-15 01:44:23 +02:00
Ville Syrjälä
7ab52cb348 drm/i915: Add PLL .compare_hw_state() vfunc
Chunk up the humongous dpll_hw_state comparison check into per-platform
variants, implemented in the dpll_mgr. This is step one in allowing
each platform (or perhaps even PLL) type to have a custom hw state
structure instead of having to smash it all into one.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240209183809.16887-5-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
2024-02-15 01:43:59 +02:00
Ville Syrjälä
b56e24be59 drm/i915: Reuse ibx_dump_hw_state() for gmch platforms
GMCH platform DPLLs are similar to the IBX+ PCH DPLLs so
we can just use the same state dump function for both.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240209183809.16887-4-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
2024-02-15 01:42:13 +02:00
Ville Syrjälä
8d18f12f97 drm/i915: Include the CRTC name in the ELD buffer mismatch
Most crtc state mismatches include the CRTC id+name in the
prints. Also include it in the ELD buffer mismatch
prints.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240209183809.16887-3-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
2024-02-15 01:41:48 +02:00
Ville Syrjälä
733c454e0d drm/i915: Fix PLL state check for gmch platforms
GMCH DPLL state check was mistakenly removed in
commit 87fc875a2b ("drm/i915/dg2: Skip shared DPLL handling").
Bring it back.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240209183809.16887-2-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
2024-02-15 01:41:26 +02:00
Linus Torvalds
91f842ffe6 linux_kselftest-kunit-fixes-6.8-rc5
This KUnit update for Linux 6.8-rc5 consists of one important fix
 to unregister kunit_bus when KUnit module is unloaded. Not doing
 so causes an error when KUnit module tries to re-register the bus
 when it gets reloaded.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmXMAnoACgkQCwJExA0N
 Qxy7UA//bP1Igj6osQfBjpR+RRyI3x069Z6zFRKmMglsyXnG2OTmTECGFTKbXPWf
 TX6UVc6iwcYTZzu2n/Xn7+smS4x3kUzYYUUhwtQzgm8Cape/XpQV3s32rYFO7XVs
 KH1QpB38wHibW+8YiBuluAfNTsjEYqlhVGIBPfmsG9jP+sm7y+yFiIu4Eo/JwCTa
 0KM4s+OFMcvC13RegOvK/mvBqqhcM7U3lMWQhRjLEXi0OjO65S4prTpM0NMO56Ar
 d8KNX718BvDY9MyihwioFE4VEIMIBNeqbzx1nbCFu7cUSS0n+VWK+41CeJBuYitm
 ub/meRILtAHbV9+9SY1REqIIrsWSC7v/+fbG05YOnTIMfVV1Ye1XvBZoJLAmiAGz
 VR1JbDbuk9xfwKU48NIS8CqH7VJjM74Rl3GJh0Meyn833BYHIfVHkRlLjBbiNDG5
 qac0XyH3vRHvp4Ud3PAmLa8e3QDo5HIHDkvBag4XOrzKdHpcBAGghrNWbGbipaKI
 7BTyvWu5c5riVo1GN81JqT1jsZF8Dld/QaS0mcvFHy5ORfCrLi2RTpYPJIRzv++a
 gUjAllyH/pqwHhB/Jj9Khi8OSv8/3jMIpMS3QE/ADwFfNslGWW63kycKeDuE9Jps
 gCVu9DHmm18OtLiYM+nSNjyWN1pvRvCV7uo8Atucbw4bBDFwZY8=
 =bDqz
 -----END PGP SIGNATURE-----

Merge tag 'linux_kselftest-kunit-fixes-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull KUnit fix from Shuah Khan:
 "One important fix to unregister kunit_bus when KUnit module is
  unloaded.

  Not doing so causes an error when KUnit module tries to re-register
  the bus when it gets reloaded"

* tag 'linux_kselftest-kunit-fixes-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  kunit: device: Unregister the kunit_bus on shutdown
2024-02-14 15:34:03 -08:00
Felix Fietkau
84443741fa netfilter: nf_tables: fix bidirectional offload regression
Commit 8f84780b84 ("netfilter: flowtable: allow unidirectional rules")
made unidirectional flow offload possible, while completely ignoring (and
breaking) bidirectional flow offload for nftables.
Add the missing flag that was left out as an exercise for the reader :)

Cc: Vlad Buslov <vladbu@nvidia.com>
Fixes: 8f84780b84 ("netfilter: flowtable: allow unidirectional rules")
Reported-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-02-15 00:20:00 +01:00
Kyle Swenson
0f1ae2821f netfilter: nat: restore default DNAT behavior
When a DNAT rule is configured via iptables with different port ranges,

iptables -t nat -A PREROUTING -p tcp -d 10.0.0.2 -m tcp --dport 32000:32010
-j DNAT --to-destination 192.168.0.10:21000-21010

we seem to be DNATing to some random port on the LAN side. While this is
expected if --random is passed to the iptables command, it is not
expected without passing --random.  The expected behavior (and the
observed behavior prior to the commit in the "Fixes" tag) is the traffic
will be DNAT'd to 192.168.0.10:21000 unless there is a tuple collision
with that destination.  In that case, we expect the traffic to be
instead DNAT'd to 192.168.0.10:21001, so on so forth until the end of
the range.

This patch intends to restore the behavior observed prior to the "Fixes"
tag.

Fixes: 6ed5943f87 ("netfilter: nat: remove l4 protocol port rovers")
Signed-off-by: Kyle Swenson <kyle.swenson@est.tech>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-02-15 00:20:00 +01:00
Pablo Neira Ayuso
f6374a82fc netfilter: nft_set_pipapo: fix missing : in kdoc
Add missing : in kdoc field names.

Fixes: 8683f4b995 ("nft_set_pipapo: Prepare for vectorised implementation: helpers")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-02-15 00:17:45 +01:00
Andrii Nakryiko
a4561f5afe bpf: Use O(log(N)) binary search to find line info record
Real-world BPF applications keep growing in size. Medium-sized production
application can easily have 50K+ verified instructions, and its line
info section in .BTF.ext has more than 3K entries.

When verifier emits log with log_level>=1, it annotates assembly code
with matched original C source code. Currently it uses linear search
over line info records to find a match. As complexity of BPF
applications grows, this O(K * N) approach scales poorly.

So, let's instead of linear O(N) search for line info record use faster
equivalent O(log(N)) binary search algorithm. It's not a plain binary
search, as we don't look for exact match. It's an upper bound search
variant, looking for rightmost line info record that starts at or before
given insn_off.

Some unscientific measurements were done before and after this change.
They were done in VM and fluctuate a bit, but overall the speed up is
undeniable.

BASELINE
========
File                              Program           Duration (us)   Insns
--------------------------------  ----------------  -------------  ------
katran.bpf.o                      balancer_ingress        2497130  343552
pyperf600.bpf.linked3.o           on_event               12389611  627288
strobelight_pyperf_libbpf.o       on_py_event              387399   52445
--------------------------------  ----------------  -------------  ------

BINARY SEARCH
=============

File                              Program           Duration (us)   Insns
--------------------------------  ----------------  -------------  ------
katran.bpf.o                      balancer_ingress        2339312  343552
pyperf600.bpf.linked3.o           on_event                5602203  627288
strobelight_pyperf_libbpf.o       on_py_event              294761   52445
--------------------------------  ----------------  -------------  ------

While Katran's speed up is pretty modest (about 105ms, or 6%), for
production pyperf BPF program (on_py_event) it's much greater already,
going from 387ms down to 295ms (23% improvement).

Looking at BPF selftests's biggest pyperf example, we can see even more
dramatic improvement, shaving more than 50% of time, going from 12.3s
down to 5.6s.

Different amount of improvement is the function of overall amount of BPF
assembly instructions in .bpf.o files (which contributes to how much
line info records there will be and thus, on average, how much time linear
search will take), among other things:

$ llvm-objdump -d katran.bpf.o | wc -l
3863
$ llvm-objdump -d strobelight_pyperf_libbpf.o | wc -l
6997
$ llvm-objdump -d pyperf600.bpf.linked3.o | wc -l
87854

Granted, this only applies to debugging cases (e.g., using veristat, or
failing verification in production), but seems worth doing to improve
overall developer experience anyways.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20240214002311.2197116-1-andrii@kernel.org
2024-02-14 23:53:42 +01:00
Hunter Chasens
3a5f1c3d83 docs: admin-guide: Update bootloader and installation instructions
Updates the bootloader and installation instructions in
admin-guide/README.rst to align with modern practices.

Details of Changes:

 - Added guidance on using EFISTUB for UEFI/EFI systems.
 - Noted that LILO is no longer in active development and provides
   alternatives.
 - Kept LILO instructions but marked as Legacy LILO Instructions.
   Suggest removal in future patch.

Signed-off-by: Hunter Chasens <hunter.chasens18@ncf.edu>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
[jc: repaired added whitespace warnings]
Link: https://lore.kernel.org/r/20240207171007.45405-1-hunter.chasens18@ncf.edu
2024-02-14 15:46:34 -07:00