Remove return statement from the void function _rtl92e_if_check_reset().
Found by checkpatch.
WARNING: void function return statements are not generally useful
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20240105093216.13981-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As it devm_pm_runtime_enable can fail due to memory allocations, it is
best to handle the error.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://msgid.link/r/20240124174101.2270249-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
After the previous patch that speeded up the test (by avoiding neigh
discovery in IPv6), the BPF CI occasionally hits this error:
rcv tstamp unexpected pkt rcv tstamp: actual 0 == expected 0
The test complains about the cmsg returned from the recvmsg() does not
have the rcv timestamp. Setting skb->tstamp or not is
controlled by a kernel static key "netstamp_needed_key". The static
key is enabled whenever this is at least one sk with the SOCK_TIMESTAMP
set.
The test_redirect_dtime does use setsockopt() to turn on
the SOCK_TIMESTAMP for the reading sk. In the kernel
net_enable_timestamp() has a delay to enable the "netstamp_needed_key"
when CONFIG_JUMP_LABEL is set. This potential delay is the likely reason
for packet missing rcv timestamp occasionally.
This patch is to create udp sockets with SOCK_TIMESTAMP set.
It sends and receives some packets until the received packet
has a rcv timestamp. It currently retries at most 5 times with 1s
in between. This should be enough to wait for the "netstamp_needed_key".
It then holds on to the socket and only closes it at the end of the test.
This guarantees that the test has the "netstamp_needed_key" key turned
on from the beginning.
To simplify the udp sockets setup, they are sending/receiving packets
in the same netns (ns_dst is used) and communicate over the "lo" dev.
Hence, the patch enables the "lo" dev in the ns_dst.
Fixes: c803475fd8 ("bpf: selftests: test skb->tstamp in redirect_neigh")
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240120060518.3604920-2-martin.lau@linux.dev
BPF CI has been reporting the tc_redirect_dtime test failing
from time to time:
test_inet_dtime:PASS:setns src 0 nsec
(network_helpers.c:253: errno: No route to host) Failed to connect to server
close_netns:PASS:setns 0 nsec
test_inet_dtime:FAIL:connect_to_fd unexpected connect_to_fd: actual -1 < expected 0
test_tcp_clear_dtime:PASS:tcp ip6 clear dtime ingress_fwdns_p100 0 nsec
The connect_to_fd failure (EHOSTUNREACH) is from the
test_tcp_clear_dtime() test and it is the very first IPv6 traffic
after setting up all the links, addresses, and routes.
The symptom is this first connect() is always slow. In my setup, it
could take ~3s.
After some tracing and tcpdump, the slowness is mostly spent in
the neighbor solicitation in the "ns_fwd" namespace while
the "ns_src" and "ns_dst" are fine.
I forced the kernel to drop the neighbor solicitation messages.
I can then reproduce EHOSTUNREACH. What actually happen could be:
- the neighbor advertisement came back a little slow.
- the "ns_fwd" namespace concluded a neighbor discovery failure
and triggered the ndisc_error_report() => ip6_link_failure() =>
icmpv6_send(skb, ICMPV6_DEST_UNREACH, ICMPV6_ADDR_UNREACH, 0)
- the client's connect() reports EHOSTUNREACH after receiving
the ICMPV6_DEST_UNREACH message.
The neigh table of both "ns_src" and "ns_dst" namespace has already
been manually populated but not the "ns_fwd" namespace. This patch
fixes it by manually populating the neigh table also in the "ns_fwd"
namespace.
Although the namespace configuration part had been existed before
the tc_redirect_dtime test, still Fixes-tagging the patch when
the tc_redirect_dtime test was added since it is the only test
hitting it so far.
Fixes: c803475fd8 ("bpf: selftests: test skb->tstamp in redirect_neigh")
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240120060518.3604920-1-martin.lau@linux.dev
When the CPU goes idle for the last time during the CPU down hotplug
process, RCU reports a final quiescent state for the current CPU. If
this quiescent state propagates up to the top, some tasks may then be
woken up to complete the grace period: the main grace period kthread
and/or the expedited main workqueue (or kworker).
If those kthreads have a SCHED_FIFO policy, the wake up can indirectly
arm the RT bandwith timer to the local offline CPU. Since this happens
after hrtimers have been migrated at CPUHP_AP_HRTIMERS_DYING stage, the
timer gets ignored. Therefore if the RCU kthreads are waiting for RT
bandwidth to be available, they may never be actually scheduled.
This triggers TREE03 rcutorture hangs:
rcu: INFO: rcu_preempt self-detected stall on CPU
rcu: 4-...!: (1 GPs behind) idle=9874/1/0x4000000000000000 softirq=0/0 fqs=20 rcuc=21071 jiffies(starved)
rcu: (t=21035 jiffies g=938281 q=40787 ncpus=6)
rcu: rcu_preempt kthread starved for 20964 jiffies! g938281 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x0 ->cpu=0
rcu: Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior.
rcu: RCU grace-period kthread stack dump:
task:rcu_preempt state:R running task stack:14896 pid:14 tgid:14 ppid:2 flags:0x00004000
Call Trace:
<TASK>
__schedule+0x2eb/0xa80
schedule+0x1f/0x90
schedule_timeout+0x163/0x270
? __pfx_process_timeout+0x10/0x10
rcu_gp_fqs_loop+0x37c/0x5b0
? __pfx_rcu_gp_kthread+0x10/0x10
rcu_gp_kthread+0x17c/0x200
kthread+0xde/0x110
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2b/0x40
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
The situation can't be solved with just unpinning the timer. The hrtimer
infrastructure and the nohz heuristics involved in finding the best
remote target for an unpinned timer would then also need to handle
enqueues from an offline CPU in the most horrendous way.
So fix this on the RCU side instead and defer the wake up to an online
CPU if it's too late for the local one.
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Fixes: 5c0930ccaa ("hrtimers: Push pending hrtimers away from outgoing CPU earlier")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.iitr10@gmail.com>
- stifb: Fix crash in stifb_blank()
- savage/sis: Error out if pixclock equals zero
- minor trivial cleanups
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZbEw6wAKCRD3ErUQojoP
X/8UAQCt7qn3lty18BTgChgYboMNquc0NVTj9cU0+EkwBa4LnAD+ML4QJPIa5HN2
LetnHIXp03dBM6JAR16+H6HIWBDePwA=
=whwV
-----END PGP SIGNATURE-----
Merge tag 'fbdev-for-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes and cleanups from Helge Deller:
"A crash fix in stifb which was missed to be included in the drm-misc
tree, two checks to prevent wrong userspace input in sisfb and
savagefb and two trivial printk cleanups:
- stifb: Fix crash in stifb_blank()
- savage/sis: Error out if pixclock equals zero
- minor trivial cleanups"
* tag 'fbdev-for-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: stifb: Fix crash in stifb_blank()
fbcon: Fix incorrect printed function name in fbcon_prepare_logo()
fbdev: sis: Error out if pixclock equals zero
fbdev: savage: Error out if pixclock equals zero
fbdev: vt8500lcdfb: Remove unnecessary print function dev_err()
Several functions implementing VIDIOC_REQBUFS and _CREATE_BUFS all use
almost the same code to fill in the flags and capability fields. Refactor
this into a new vb2_set_flags_and_caps() function that replaces the old
fill_buf_caps() and validate_memory_flags() functions.
This also fixes a bug where vb2_ioctl_create_bufs() would not set the
V4L2_BUF_CAP_SUPPORTS_MAX_NUM_BUFFERS cap and also not fill in the
max_num_buffers field.
Fixes: d055a76c00 ("media: core: Report the maximum possible number of buffers for the queue")
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Use vb2_get_num_buffers() to avoid using queue num_buffers field directly.
This allows us to change how the number of buffers is computed in the
future.
Fixes: d055a76c00 ("media: core: Report the maximum possible number of buffers for the queue")
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Change compatible string to match dt bindings for TI devices. K3 family
prefix should not be included as it deviates from naming convention.
Fixes: 9707a6254a ("media: chips-media: wave5: Add the v4l2 layer")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/all/CAMuHMdUYOq=q1j=d+Eac28hthOUAaNUkuvxmRu-mUN1pLKq69g@mail.gmail.com/
Signed-off-by: Brandon Brnich <b-brnich@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
K3 family prefix is not included in other TI compatible strings. Remove
this prefix to keep naming convention consistent.
Fixes: de4b9f7e37 ("dt-bindings: media: wave5: add yaml devicetree bindings")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/all/CAMuHMdUYOq=q1j=d+Eac28hthOUAaNUkuvxmRu-mUN1pLKq69g@mail.gmail.com/
Signed-off-by: Brandon Brnich <b-brnich@ti.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Only convert it to ENOMEM in ttm_bo_validate.
This allows ttm_bo_validate to distinguish between an out of memory
situation and just out of space in a placement domain.
v2: improve commit message
v3: fix kerneldoc typos
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Zack Rusin <zack.rusin@broadcom.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240112125158.2748-3-christian.koenig@amd.com
Previously, __spi_sync() and __spi_async() set message->spi to the spi
device independently after calling __spi_validate(). __spi_validate()
also would conditionally set this if it needed to split the message
since it wasn't set yet.
Since both __spi_sync() and __spi_async() call __spi_validate(), we can
consolidate this into only setting message->spi once (unconditionally)
in __spi_validate(). This will also save any future callers of
__spi_validate() from also needing to set message->spi.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://msgid.link/r/20240123214946.2616786-1-dlechner@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For some 1-bit fields in struct dev_pm_info the data type is bool, while
for some other 1-bit fields in there it is unsigned int, and these
differences are somewhat arbitrary.
For consistency, change the data type of the latter to bool, so that all
of the 1-bit fields in struct dev_pm_info fields are bool.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The quirk table entries should be put in the USB ID order, but some
entries have been put in random places. Re-sort them.
Fixes: bf990c1023 ("ALSA: usb-audio: add quirk to fix Hamedal C20 disconnect issue")
Fixes: fd28941cff ("ALSA: usb-audio: Add new quirk FIXED_RATE for JBL Quantum810 Wireless")
Fixes: dfd5fe19db ("ALSA: usb-audio: Add FIXED_RATE quirk for JBL Quantum610 Wireless")
Fixes: 4a63e68a29 ("ALSA: usb-audio: Fix microphone sound on Nexigo webcam.")
Fixes: 7822baa844 ("ALSA: usb-audio: add quirk for RODE NT-USB+")
Fixes: 4fb7c24f69 ("ALSA: usb-audio: Add quirk for Fiero SC-01")
Fixes: 2307a0e1ca ("ALSA: usb-audio: Add quirk for Fiero SC-01 (fw v1.0.0)")
Link: https://lore.kernel.org/r/20240124155307.16996-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Move set_capacity() outside of the section procected by (&d->lock).
To avoid possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
[1] lock(&bdev->bd_size_lock);
local_irq_disable();
[2] lock(&d->lock);
[3] lock(&bdev->bd_size_lock);
<Interrupt>
[4] lock(&d->lock);
*** DEADLOCK ***
Where [1](&bdev->bd_size_lock) hold by zram_add()->set_capacity().
[2]lock(&d->lock) hold by aoeblk_gdalloc(). And aoeblk_gdalloc()
is trying to acquire [3](&bdev->bd_size_lock) at set_capacity() call.
In this situation an attempt to acquire [4]lock(&d->lock) from
aoecmd_cfg_rsp() will lead to deadlock.
So the simplest solution is breaking lock dependency
[2](&d->lock) -> [3](&bdev->bd_size_lock) by moving set_capacity()
outside.
Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240124072436.3745720-2-bigunclemax@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When the block layer doesn't generate/verify metadata, the SG length is
smaller than the transfer length. This is because the SG length doesn't
include the metadata length that is added by the HW on the wire. The
target failes those commands with "Data SGL Length Invalid" by comparing
the transfer length and the SG length. Fix it by adding the metadata
length to the transfer length when there is no metadata SGL. The bug
reproduces when setting read_verify/write_generate configs to 0 at the
child multipath device or at the primary device when NVMe multipath is
disabled.
Note that setting those configs to 0 on the multipath device (ns_head)
doesn't have any impact on the I/Os.
Fixes: 5ec5d3bddc ("nvme-rdma: add metadata/T10-PI support")
Signed-off-by: Israel Rukshin <israelr@nvidia.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Instead of opencoded checks for number of fsnotify connectors add a
helper fsnotify_sb_has_watchers().
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
The RODE NT-USB+ is marketed as a professional usb microphone, however the
usb audio interface is a mess:
[ 1.130977] usb 1-5: new full-speed USB device number 2 using xhci_hcd
[ 1.503906] usb 1-5: config 1 has an invalid interface number: 5 but max is 4
[ 1.503912] usb 1-5: config 1 has no interface number 4
[ 1.519689] usb 1-5: New USB device found, idVendor=19f7, idProduct=0035, bcdDevice= 1.09
[ 1.519695] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.519697] usb 1-5: Product: RØDE NT-USB+
[ 1.519699] usb 1-5: Manufacturer: RØDE
[ 1.519700] usb 1-5: SerialNumber: 1D773A1A
[ 8.327495] usb 1-5: 1:1: cannot get freq at ep 0x82
[ 8.344500] usb 1-5: 1:2: cannot get freq at ep 0x82
[ 8.365499] usb 1-5: 2:1: cannot get freq at ep 0x2
Add QUIRK_FLAG_GET_SAMPLE_RATE to work around the broken sample rate get.
I have asked Rode support to fix it, but they show no interest.
Signed-off-by: Sean Young <sean@mess.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240124151524.23314-1-sean@mess.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If parent inode is not watching, check for the event in masks of
sb/mount/inode masks early to optimize out most of the code in
__fsnotify_parent() and avoid calling fsnotify().
Jens has reported that this optimization improves BW and IOPS in an
io_uring benchmark by more than 10% and reduces perf reported CPU usage.
before:
+ 4.51% io_uring [kernel.vmlinux] [k] fsnotify
+ 3.67% io_uring [kernel.vmlinux] [k] __fsnotify_parent
after:
+ 2.37% io_uring [kernel.vmlinux] [k] __fsnotify_parent
Reported-and-tested-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/linux-fsdevel/b45bd8ff-5654-4e67-90a6-aad5e6759e0b@kernel.dk/
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20240116113247.758848-1-amir73il@gmail.com>
Document samsung,exynos850-spi compatible which will be used on
Exynos850 SoC. Exynos850 doesn't have ioclk, so only two clocks are
needed (bus clock and functional SPI clock).
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240120012948.8836-3-semen.protsenko@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add SPI port configuration for Exynos850 SoC. It has 3 USI blocks which
can be configured in SPI mode:
* spi_0: BLK_PERI_SPI_0 (0x13940000)
* spi_1: BLK_ALIVE_USI_CMGP00 (0x11d00000)
* spi_2: BLK_ALIVE_USI_CMGP01 (0x11d20000)
SPI FIFO depth is 64 bytes for all those SPI blocks, so the
.fifo_lvl_mask value is set to 0x7f. All blocks have DIV_4 as the
default internal clock divider, and an internal loopback mode to run
a loopback test.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://msgid.link/r/20240120012948.8836-6-semen.protsenko@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As reported by Guenter the limit we've got on the number of chip selects is
set too low for some systems, raise the limit. We should really remove the
hard coded limit but this is needed as a fix so let's do the simple thing
and raise the limit for now.
Fixes: 4d8ff6b099 ("spi: Add multi-cs memories support in SPI core")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Suggested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://msgid.link/r/20240124-spi-multi-cs-max-v2-1-df6fc5ab1abc@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Sami Tolvanen <samitolvanen@google.com> says:
We noticed that 64-bit RISC-V kernels limit mmap_rnd_bits to 24
even if the hardware supports a larger virtual address space size
[1]. These two patches allow mmap_rnd_bits_max to be changed during
init, and bumps up the maximum randomness if we end up setting up
4/5-level paging at boot.
* b4-shazam-merge:
riscv: mm: Update mmap_rnd_bits_max
mm: Change mmap_rnd_bits_max to __ro_after_init
Link: https://lore.kernel.org/r/20230929211155.3910949-4-samitolvanen@google.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
ARCH_MMAP_RND_BITS_MAX is based on Sv39, which leaves a few
potential bits of mmap randomness on the table if we end up enabling
4/5-level paging. Update mmap_rnd_bits_max to take the final address
space size into account. This increases mmap_rnd_bits_max from 24 to
33 with Sv48/57.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230929211155.3910949-6-samitolvanen@google.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Allow mmap_rnd_bits_max to be updated on architectures that
determine virtual address space size at runtime instead of relying
on Kconfig options by changing it from const to __ro_after_init.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230929211155.3910949-5-samitolvanen@google.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
alloc_desc() and early_irq_init() contain duplicated code to initialize
interrupt descriptors.
Replace that with a helper function.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240122085716.2999875-6-dawei.li@shingroup.cn
GIC & GIC-v3 share same gic_irq() implementations, both of which serve
exact same purpose as irqd_to_hwirq(). irqd_to_hwirq() is a generic and
top level API of the interrupt subsystem, it's independent of any chip
implementation.
Replace gic_irq() with irqd_to_hwirq() and convert struct irq_data::hwirq
to irq_hw_number_t explicitly.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240122085716.2999875-3-dawei.li@shingroup.cn
Replace the open coded register polling loop with
readl_relaxed_poll_timeout_atomic() which provides the same functionality.
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240122085716.2999875-2-dawei.li@shingroup.cn
Replace hard-coded interrupt parts (GIC, flags) with standard defines
for readability. No changes in resulting DTBs.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231205153317.346109-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add touch keys which are handled in touchscreen driver.
Use KEY_APPSELECT for the left button because other devices use that
even though downstream kernel uses KEY_RECENT.
Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20231204094649.10094-1-matti.lehtimaki@gmail.com
[bjorn: Wrapped each cell in <>, as requested by Luca]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The test on so_count in nfsd4_release_lockowner() is nonsense and
harmful. Revert to using check_for_locks(), changing that to not sleep.
First: harmful.
As is documented in the kdoc comment for nfsd4_release_lockowner(), the
test on so_count can transiently return a false positive resulting in a
return of NFS4ERR_LOCKS_HELD when in fact no locks are held. This is
clearly a protocol violation and with the Linux NFS client it can cause
incorrect behaviour.
If RELEASE_LOCKOWNER is sent while some other thread is still
processing a LOCK request which failed because, at the time that request
was received, the given owner held a conflicting lock, then the nfsd
thread processing that LOCK request can hold a reference (conflock) to
the lock owner that causes nfsd4_release_lockowner() to return an
incorrect error.
The Linux NFS client ignores that NFS4ERR_LOCKS_HELD error because it
never sends NFS4_RELEASE_LOCKOWNER without first releasing any locks, so
it knows that the error is impossible. It assumes the lock owner was in
fact released so it feels free to use the same lock owner identifier in
some later locking request.
When it does reuse a lock owner identifier for which a previous RELEASE
failed, it will naturally use a lock_seqid of zero. However the server,
which didn't release the lock owner, will expect a larger lock_seqid and
so will respond with NFS4ERR_BAD_SEQID.
So clearly it is harmful to allow a false positive, which testing
so_count allows.
The test is nonsense because ... well... it doesn't mean anything.
so_count is the sum of three different counts.
1/ the set of states listed on so_stateids
2/ the set of active vfs locks owned by any of those states
3/ various transient counts such as for conflicting locks.
When it is tested against '2' it is clear that one of these is the
transient reference obtained by find_lockowner_str_locked(). It is not
clear what the other one is expected to be.
In practice, the count is often 2 because there is precisely one state
on so_stateids. If there were more, this would fail.
In my testing I see two circumstances when RELEASE_LOCKOWNER is called.
In one case, CLOSE is called before RELEASE_LOCKOWNER. That results in
all the lock states being removed, and so the lockowner being discarded
(it is removed when there are no more references which usually happens
when the lock state is discarded). When nfsd4_release_lockowner() finds
that the lock owner doesn't exist, it returns success.
The other case shows an so_count of '2' and precisely one state listed
in so_stateid. It appears that the Linux client uses a separate lock
owner for each file resulting in one lock state per lock owner, so this
test on '2' is safe. For another client it might not be safe.
So this patch changes check_for_locks() to use the (newish)
find_any_file_locked() so that it doesn't take a reference on the
nfs4_file and so never calls nfsd_file_put(), and so never sleeps. With
this check is it safe to restore the use of check_for_locks() rather
than testing so_count against the mysterious '2'.
Fixes: ce3c4ad7f4 ("NFSD: Fix possible sleep during nfsd4_release_lockowner()")
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Cc: stable@vger.kernel.org # v6.2+
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
virtqueue_enable_cb() will call virtqueue_poll() which will check if
queue is broken at beginning, so remove the virtqueue_is_broken() call
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20240124120834.49410-1-lirongqing@baidu.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>