[ Upstream commit 008e7a7c29 ]
Although unlikely, recent support for IPIP tunnels increases chances of
reaching this WARN_ON_ONCE if userspace manages to build a sufficiently
long forward path.
Remove it.
Fixes: ddb94eafab ("net: resolve forwarding path from virtual netdevice and HW destination address")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8fde939b02 ]
There is race between the netdev notifier ip_vs_dst_event()
and the code that caches dst with dev that is going down.
As the FIB can be notified for the closed device after our
handler finishes, it is possible valid route to be returned
and cached resuling in a leaked dev reference until the dest
is not removed.
To prevent new dest_dst to be attached to dest just after the
handler dropped the old one, add a netif_running() check
to make sure the notifier handler is not currently running
for device that is closing.
Fixes: 7a4f0761fc ("IPVS: init and cleanup restructuring")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ce9f6aec0f ]
The test generates VXLAN traffic using mausezahn, where the encapsulated
inner IPv6 packet has an incorrect payload length set in the IPv6 header.
After VXLAN decapsulation, such packets do not pass sanity checks in
br_netfilter and are dropped, which causes the test to fail.
Fix this by setting the correct IPv6 payload length for the encapsulated
packet generated by mausezahn, so that the packet is accepted
by br_netfilter.
tools/testing/selftests/net/forwarding/vxlan_bridge_1d_ipv6.sh
lines 698-706
)"00:03:"$( : Payload length
)"3a:"$( : Next header
)"04:"$( : Hop limit
)"$saddr:"$( : IP saddr
)"$daddr:"$( : IP daddr
)"80:"$( : ICMPv6.type
)"00:"$( : ICMPv6.code
)"00:"$( : ICMPv6.checksum
)
Data after IPv6 header:
• 80: — 1 byte (ICMPv6 type)
• 00: — 1 byte (ICMPv6 code)
• 00: — 1 byte (ICMPv6 checksum, truncated)
Total: 3 bytes → 00:03 is correct. The old value 00:08 did not match
the actual payload size.
Fixes: b07e9957f2 ("selftests: forwarding: Add VxLAN tests with a VLAN-unaware bridge for IPv6")
Signed-off-by: Aleksei Oladko <aleksey.oladko@virtuozzo.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260213131907.43351-3-aleksey.oladko@virtuozzo.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 02cb2e6bac ]
The test generates VXLAN traffic using mausezahn, where the encapsulated
inner IPv4 packet contains a zero IP header checksum. After VXLAN
decapsulation, such packets do not pass sanity checks in br_netfilter
and are dropped, which causes the test to fail.
Fix this by calculating and setting a valid IPv4 header checksum for the
encapsulated packet generated by mausezahn, so that the packet is accepted
by br_netfilter. Fixed by using the payload_template_calc_checksum() /
payload_template_expand_checksum() helpers that are only available
in v6.3 and newer kernels.
Fixes: a0b61f3d8e ("selftests: forwarding: vxlan_bridge_1d: Add an ECN decap test")
Signed-off-by: Aleksei Oladko <aleksey.oladko@virtuozzo.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260213131907.43351-2-aleksey.oladko@virtuozzo.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8b769e311a ]
syzbot triggered a warning[1] about the number of mdb entries in a context.
It turned out that there are multiple ways to trigger that warning today
(some got added during the years), the root cause of the problem is that
the increase is done conditionally, and over the years these different
conditions increased so there were new ways to trigger the warning, that is
to do a decrease which wasn't paired with a previous increase.
For example one way to trigger it is with flush:
$ ip l add br0 up type bridge vlan_filtering 1 mcast_snooping 1
$ ip l add dumdum up master br0 type dummy
$ bridge mdb add dev br0 port dumdum grp 239.0.0.1 permanent vid 1
$ ip link set dev br0 down
$ ip link set dev br0 type bridge mcast_vlan_snooping 1
^^^^ this will enable snooping, but will not update mdb_n_entries
because in __br_multicast_enable_port_ctx() we check !netif_running
$ bridge mdb flush dev br0
^^^ this will trigger the warning because it will delete the pg which
we added above, which will try to decrease mdb_n_entries
Fix the problem by removing the conditional increase and always keep the
count up-to-date while the vlan exists. In order to do that we have to
first initialize it on port-vlan context creation, and then always increase
or decrease the value regardless of mcast options. To keep the current
behaviour we have to enforce the mdb limit only if the context is port's or
if the port-vlan's mcast snooping is enabled.
[1]
------------[ cut here ]------------
n == 0
WARNING: net/bridge/br_multicast.c:718 at br_multicast_port_ngroups_dec_one net/bridge/br_multicast.c:718 [inline], CPU#0: syz.4.4607/22043
WARNING: net/bridge/br_multicast.c:718 at br_multicast_port_ngroups_dec net/bridge/br_multicast.c:771 [inline], CPU#0: syz.4.4607/22043
WARNING: net/bridge/br_multicast.c:718 at br_multicast_del_pg+0x1bbe/0x1e20 net/bridge/br_multicast.c:825, CPU#0: syz.4.4607/22043
Modules linked in:
CPU: 0 UID: 0 PID: 22043 Comm: syz.4.4607 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/24/2026
RIP: 0010:br_multicast_port_ngroups_dec_one net/bridge/br_multicast.c:718 [inline]
RIP: 0010:br_multicast_port_ngroups_dec net/bridge/br_multicast.c:771 [inline]
RIP: 0010:br_multicast_del_pg+0x1bbe/0x1e20 net/bridge/br_multicast.c:825
Code: 41 5f 5d e9 04 7a 48 f7 e8 3f 73 5c f7 90 0f 0b 90 e9 cf fd ff ff e8 31 73 5c f7 90 0f 0b 90 e9 16 fd ff ff e8 23 73 5c f7 90 <0f> 0b 90 e9 60 fd ff ff e8 15 73 5c f7 eb 05 e8 0e 73 5c f7 48 8b
RSP: 0018:ffffc9000c207220 EFLAGS: 00010293
RAX: ffffffff8a68042d RBX: ffff88807c6f1800 RCX: ffff888066e90000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000000 R08: ffff888066e90000 R09: 000000000000000c
R10: 000000000000000c R11: 0000000000000000 R12: ffff8880303ef800
R13: dffffc0000000000 R14: ffff888050eb11c4 R15: 1ffff1100a1d6238
FS: 00007fa45921b6c0(0000) GS:ffff8881256f5000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fa4591f9ff8 CR3: 0000000081df2000 CR4: 00000000003526f0
Call Trace:
<TASK>
br_mdb_flush_pgs net/bridge/br_mdb.c:1525 [inline]
br_mdb_flush net/bridge/br_mdb.c:1544 [inline]
br_mdb_del_bulk+0x5e2/0xb20 net/bridge/br_mdb.c:1561
rtnl_mdb_del+0x48a/0x640 net/core/rtnetlink.c:-1
rtnetlink_rcv_msg+0x77e/0xbe0 net/core/rtnetlink.c:6967
netlink_rcv_skb+0x232/0x4b0 net/netlink/af_netlink.c:2550
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x80f/0x9b0 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1894
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg net/socket.c:742 [inline]
____sys_sendmsg+0xa68/0xad0 net/socket.c:2592
___sys_sendmsg+0x2a5/0x360 net/socket.c:2646
__sys_sendmsg net/socket.c:2678 [inline]
__do_sys_sendmsg net/socket.c:2683 [inline]
__se_sys_sendmsg net/socket.c:2681 [inline]
__x64_sys_sendmsg+0x1bd/0x2a0 net/socket.c:2681
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xe2/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fa45839aeb9
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fa45921b028 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007fa458615fa0 RCX: 00007fa45839aeb9
RDX: 0000000000000000 RSI: 00002000000000c0 RDI: 0000000000000004
RBP: 00007fa458408c1f R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fa458616038 R14: 00007fa458615fa0 R15: 00007fff0b59fae8
</TASK>
Fixes: b57e8d870d ("net: bridge: Maintain number of MDB entries in net_bridge_mcast_port")
Reported-by: syzbot+d5d1b7343531d17bd3c5@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/aYrWbRp83MQR1ife@debil/T/#t
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Link: https://patch.msgid.link/20260213070031.1400003-2-nikolay@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit da29e453dc ]
Commit 3db6e0d172 ("rds: use RCU to synchronize work-enqueue with
connection teardown") modifies rds_sendmsg to avoid enqueueing work
while a tear down is in progress. However, it also changed the return
value of rds_sendmsg to that of rds_send_xmit instead of the
payload_len. This means the user may incorrectly receive errno values
when it should have simply received a payload of 0 while the peer
attempts a reconnections. So this patch corrects the teardown handling
code to only use the out error path in that case, thus restoring the
original payload_len return value.
Fixes: 3db6e0d172 ("rds: use RCU to synchronize work-enqueue with connection teardown")
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260213035409.1963391-1-achender@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d1dc80143 ]
A malicious or buggy Xen guest can write "0" to the xenbus key
"multi-queue-num-queues". The connect() function in the backend only
validates the upper bound (requested_num_queues > xenvif_max_queues)
but not zero, allowing requested_num_queues=0 to reach
vzalloc(array_size(0, sizeof(struct xenvif_queue))), which triggers
WARN_ON_ONCE(!size) in __vmalloc_node_range().
On systems with panic_on_warn=1, this allows a guest-to-host denial
of service.
The Xen network interface specification requires
the queue count to be "greater than zero".
Add a zero check to match the validation already present
in xen-blkback, which has included this
guard since its multi-queue support was added.
Fixes: 8d3d53b3e4 ("xen-netback: Add support for multiple queues")
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://patch.msgid.link/20260212224040.86674-1-n7l8m4@u.northwestern.edu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e7021d2ae ]
catc_probe() fills three URBs with hardcoded endpoint pipes without
verifying the endpoint descriptors:
- usb_sndbulkpipe(usbdev, 1) and usb_rcvbulkpipe(usbdev, 1) for TX/RX
- usb_rcvintpipe(usbdev, 2) for interrupt status
A malformed USB device can present these endpoints with transfer types
that differ from what the driver assumes.
Add a catc_usb_ep enum for endpoint numbers, replacing magic constants
throughout. Add usb_check_bulk_endpoints() and usb_check_int_endpoints()
calls after usb_set_interface() to verify endpoint types before use,
rejecting devices with mismatched descriptors at probe time.
Similar to
- commit 90b7f29617 ("net: usb: rtl8150: enable basic endpoint checking")
which fixed the issue in rtl8150.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Suggested-by: Simon Horman <horms@kernel.org>
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Link: https://patch.msgid.link/20260212214154.3609844-1-n7l8m4@u.northwestern.edu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a49d2a2c37 ]
The max_adj field in ptp_clock_info tells userspace how much the PHC
clock frequency can be adjusted. ptp4l reads this and will never request
a correction larger than max_adj.
On both sparx5 and lan969x the clock offset may never converge because
the servo needs a frequency correction larger than the current max_adj
of 200000 (200 ppm) allows. The servo rails at the max and the offset
stays in the tens of microseconds.
The hardware has no inherent max adjustment limit; frequency correction
is done by writing a 64-bit clock period increment to CLK_PER_CFG, and
the register has plenty of range. The 200000 value was just an overly
conservative software limit. The max_adj is shared between sparx5 and
lan969x, and the increased value is safe for both.
Fix this by increasing max_adj to 10000000 (10000 ppm), giving the
servo sufficient headroom.
Fixes: 0933bd0404 ("net: sparx5: Add support for ptp clocks")
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260212-sparx5-ptp-max-adj-v2-v1-1-06b200e50ce3@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 026f6513c5 ]
ocelot_port_xmit_inj() calls ocelot_can_inject() and
ocelot_port_inject_frame() without holding the injection group lock.
Both functions contain lockdep_assert_held() for the injection lock,
and the correct caller felix_port_deferred_xmit() properly acquires
the lock using ocelot_lock_inj_grp() before calling these functions.
Add ocelot_lock_inj_grp()/ocelot_unlock_inj_grp() around the register
injection path to fix the missing lock protection. The FDMA path is not
affected as it uses its own locking mechanism.
Fixes: c5e12ac3be ("net: mscc: ocelot: serialize access to the injection/extraction groups")
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20260208225602.1339325-4-n7l8m4@u.northwestern.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47f79b20e7 ]
Split ocelot_port_xmit() into two separate functions:
- ocelot_port_xmit_fdma(): handles the FDMA injection path
- ocelot_port_xmit_inj(): handles the register-based injection path
The top-level ocelot_port_xmit() now dispatches to the appropriate
function based on the ocelot_fdma_enabled static key.
This is a pure refactor with no behavioral change. Separating the two
code paths makes each one simpler and prepares for adding proper locking
to the register injection path without affecting the FDMA path.
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20260208225602.1339325-3-n7l8m4@u.northwestern.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 026f6513c5 ("net: mscc: ocelot: add missing lock protection in ocelot_port_xmit_inj()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 29372f07f7 ]
Extract the PTP timestamp handling logic from ocelot_port_xmit() into a
separate ocelot_xmit_timestamp() helper function. This is a pure
refactor with no behavioral change.
The helper returns false if the skb was consumed (freed) due to a
timestamp request failure, and true if the caller should continue with
frame injection. The rew_op value is returned via pointer.
This prepares for splitting ocelot_port_xmit() into separate FDMA and
register injection paths in a subsequent patch.
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20260208225602.1339325-2-n7l8m4@u.northwestern.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 026f6513c5 ("net: mscc: ocelot: add missing lock protection in ocelot_port_xmit_inj()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6c28aa8dfd ]
DWRR (Deficit Weighted Round Robin) scheduling distributes bandwidth
across traffic classes based on per-queue cost values, where lower cost
means higher bandwidth share.
The SPX5_DWRR_COST_MAX constant is 63 (6 bits) but the hardware
register field HSCH_DWRR_ENTRY_DWRR_COST is GENMASK(24, 20), only
5 bits wide (max 31). This causes sparx5_weight_to_hw_cost() to
compute cost values that silently overflow via FIELD_PREP, resulting
in incorrect scheduling weights.
Set SPX5_DWRR_COST_MAX to 31 to match the hardware register width.
Fixes: 211225428d ("net: microchip: sparx5: add support for offloading ets qdisc")
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260210-sparx5-fix-dwrr-cost-max-v1-1-58fbdbc25652@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a2646773a0 ]
As explained in [1], iproute2 started rejecting tc-police burst sizes
that result in an overflow. This can happen when the burst size is high
enough and the rate is low enough.
A couple of test cases specify such configurations, resulting in
iproute2 errors and test failure.
Fix by reducing the burst size so that the test will pass with both new
and old iproute2 versions.
[1] https://lore.kernel.org/netdev/20250916215731.3431465-1-jay.vosburgh@canonical.com/
Fixes: cb12d17632 ("selftests: mlxsw: tc_restrictions: Test tc-police restrictions")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/88b00c6e85188aa6a065dc240206119b328c46e1.1770643998.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e5c9ffc6ae ]
On certain platforms (PowerNV systems without a power-mgt DT node),
cpuidle may register only a single idle state. In cases where that
single state is a polling state (state 0), the ladder governor may
incorrectly treat state 1 as the first usable state and pass an
out-of-bounds index. This can lead to a NULL enter callback being
invoked, ultimately resulting in a system crash.
[ 13.342636] cpuidle-powernv : Only Snooze is available
[ 13.351854] Faulting instruction address: 0x00000000
[ 13.376489] NIP [0000000000000000] 0x0
[ 13.378351] LR [c000000001e01974] cpuidle_enter_state+0x2c4/0x668
Fix this by adding a bail-out in cpuidle_select() that returns state 0
directly when state_count <= 1, bypassing the governor and keeping the
tick running.
Fixes: dc2251bf98 ("cpuidle: Eliminate the CPUIDLE_DRIVER_STATE_START symbol")
Signed-off-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/20260216185005.1131593-2-aboorvad@linux.ibm.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd7ef20ba8 ]
On the THUNDEROBOT ZERO laptop, the second NVMe slot and the discrete
NVIDIA GPU are both controlled by power-resource PXP. Due to the SSDT table
bug (lack of reference), PXP will be shut dow as an "unused" power resource
during initialization, making the NVMe slot #2 + NVIDIA both inaccessible.
This issue was introduced by commit a1224f34d7 ("ACPI: PM: Check
states of power resources during initialization"). Here are test
results on the three consecutive commits:
(bad again!) a1224f34d7 ACPI: PM: Check states of power resources during initialization
(good) bc28368596 ACPI: PM: Do not turn off power resources in unknown state
(bad) 519d81956e Linux 5.15-rc6
On commit bc28368596 ("ACPI: PM: Do not turn off power resources in
unknown state") this was not an issue because the power resource state
left UNKNOWN thus being ignored.
See also commit 9b04d99788 ("ACPI: PM: Do not turn of unused power
resources on the Toshiba Click Mini") which is another almost identical
case to this one.
Fixes: a1224f34d7 ("ACPI: PM: Check states of power resources during initialization")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221087
Signed-off-by: Zhai Can <bczhc0@126.com>
Link: https://patch.msgid.link/20260214161452.2849346-1-bczhc0@126.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5ed4b6b37c ]
objpool uses struct objpool_head to store metadata information, and its
cpu_slots member points to an array of pointers that store the addresses
of the percpu ring arrays. However, the memory size allocated during the
initialization of cpu_slots is nr_cpu_ids * sizeof(struct objpool_slot).
On a 64-bit machine, the size of struct objpool_slot is 16 bytes, which is
twice the size of the actual pointer required, and the extra memory is
never be used, resulting in a waste of memory. Therefore, the memory size
required for cpu_slots needs to be corrected.
Link: https://lkml.kernel.org/r/20260202132846.68257-1-zhouwenhao7600@gmail.com
Fixes: b4edb8d2d4 ("lib: objpool added: ring-array based lockless MPMC")
Signed-off-by: zhouwenhao <zhouwenhao7600@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Matt Wu <wuqiang.matt@bytedance.com>
Cc: wuqiang.matt <wuqiang.matt@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b24335521d ]
selftests/memfd: use IPC semaphore instead of SIGSTOP/SIGCONT
In order to synchronize new processes to test inheritance of memfd_noexec
sysctl, memfd_test sets up the sysctl with a value before creating the new
process. The new process then sends itself a SIGSTOP in order to wait for
the parent to flip the sysctl value and send a SIGCONT signal.
This would work as intended if it wasn't the fact that the new process is
being created with CLONE_NEWPID, which creates a new PID namespace and the
new process has PID 1 in this namespace. There're restrictions on sending
signals to PID 1 and, although it's relaxed for other than root PID
namespace, it's biting us here. In this specific case the SIGSTOP sent by
the new process is ignored (no error to kill() is returned) and it never
stops its execution. This is usually not noticiable as the parent usually
manages to set the new sysctl value before the child has a chance to run
and the test succeeds. But if you run the test in a loop, it eventually
reproduces:
while [ 1 ]; do ./memfd_test >log 2>&1 || break; done; cat log
So this patch replaces the SIGSTOP/SIGCONT synchronization with IPC
semaphore.
Link: https://lkml.kernel.org/r/a7776389-b3d6-4b18-b438-0b0e3ed1fd3b@work
Fixes: 6469b66e3f ("selftests: improve vm.memfd_noexec sysctl tests")
Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: liuye <liuye@kylinos.cn>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c7d54dafa0 ]
On partitioned systems, multiple TPMI instances may exist per package,
but RAPL registers are only valid on one instance since RAPL has
package-scope control. Other instances return invalid versions during
domain parsing, which is expected behavior on such systems.
Currently this generates a firmware bug warning:
intel_rapl_tpmi: [Firmware Bug]: Invalid version
Remove the FW_BUG tag, downgrade to pr_debug(), and update the message
to clarify that invalid versions are expected on partitioned systems
where only one instance can be valid.
Fixes: 9eef7f9da9 ("powercap: intel_rapl: Introduce RAPL TPMI interface driver")
Reported-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20260211223401.1575776-1-sathyanarayanan.kuppuswamy@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 56eb0c0ed3 ]
per_cpu(cpc_desc_ptr, cpu) object is initialized for only the online
CPUs via acpi_soft_cpu_online() --> __acpi_processor_start() -->
acpi_cppc_processor_probe().
However, send_pcc_cmd() and acpi_get_psd_map() still iterate over all
possible CPUs. In acpi_get_psd_map(), encountering an offline CPU
returns -EFAULT, causing cppc_cpufreq initialization to fail.
This breaks systems booted with "nosmt" or "nosmt=force".
Fix by using for_each_online_cpu() in both functions.
Fixes: 80b8286aee ("ACPI / CPPC: support for batching CPPC requests")
Signed-off-by: Sean V Kelley <skelley@nvidia.com>
Link: https://patch.msgid.link/20260211212254.30190-1-skelley@nvidia.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b2bc7c44ed ]
In the 'DeleteIndexEntryRoot' case of the 'do_action' function, the
entry size ('esize') is retrieved from the log record without adequate
bounds checking.
Specifically, the code calculates the end of the entry ('e2') using:
e2 = Add2Ptr(e1, esize);
It then calculates the size for memmove using 'PtrOffset(e2, ...)',
which subtracts the end pointer from the buffer limit. If 'esize' is
maliciously large, 'e2' exceeds the used buffer size. This results in
a negative offset which, when cast to size_t for memmove, interprets
as a massive unsigned integer, leading to a heap buffer overflow.
This commit adds a check to ensure that the entry size ('esize') strictly
fits within the remaining used space of the index header before performing
memory operations.
Fixes: b46acd6a6a ("fs/ntfs3: Add NTFS journal")
Signed-off-by: Jiasheng Jiang <jiashengjiangcool@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 27b75ca4e5 ]
When processing valid within the range [valid : pos), if valid cannot
be retrieved correctly, for example, if the retrieved valid value is
always the same, this can trigger a potential infinite loop, similar
to the hung problem reported by syzbot [1].
Adding a check for the valid value within the loop body, and terminating
the loop and returning -EINVAL if the value is the same as the current
value, can prevent this.
[1]
INFO: task syz.4.21:6056 blocked for more than 143 seconds.
Call Trace:
rwbase_write_lock+0x14f/0x750 kernel/locking/rwbase_rt.c:244
inode_lock include/linux/fs.h:1027 [inline]
ntfs_file_write_iter+0xe6/0x870 fs/ntfs3/file.c:1284
Fixes: 4342306f0f ("fs/ntfs3: Add file operations and implementation")
Reported-by: syzbot+bcf9e1868c1a0c7e04f1@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=bcf9e1868c1a0c7e04f1
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f223ebffa1 ]
KMSAN reports an uninitialized value in longest_match_std(), invoked
from ntfs_compress_write(). When new folios are allocated without being
marked uptodate and ni_read_frame() is skipped because the caller expects
the frame to be completely overwritten, some reserved folios may remain
only partially filled, leaving the rest memory uninitialized.
Fixes: 584f60ba22 ("ntfs3: Convert ntfs_get_frame_pages() to use a folio")
Tested-by: syzbot+08d8956768c96a2c52cf@syzkaller.appspotmail.com
Reported-by: syzbot+08d8956768c96a2c52cf@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=08d8956768c96a2c52cf
Signed-off-by: Bartlomiej Kubik <kubik.bartlomiej@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 22dbb0987b ]
By having them share the same space in struct io_cancel_data, it ends up
disallowing IORING_ASYNC_CANCEL_FD|IORING_ASYNC_CANCEL_USERDATA from
working. Eg you cannot match on both a file and user_data for
cancelation purposes. This obviously isn't a common use case as nobody
has reported this, but it does result in -ENOENT potentially being
returned when trying to match on both, rather than actually doing what
the API says it would.
Fixes: 4bf94615b8 ("io_uring: allow IORING_OP_ASYNC_CANCEL with 'fd' key")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2ebc8d600f ]
DRBD requires stable pages because it may read the same bio data
multiple times for local disk I/O and network transmission, and in
some cases for calculating checksums.
The BLK_FEAT_STABLE_WRITES flag is set when the device is first
created, but blk_set_stacking_limits() clears it whenever a
backing device is attached. In some cases the flag may be
inherited from the backing device, but we want it to be enabled
at all times.
Unconditionally re-enable BLK_FEAT_STABLE_WRITES in
drbd_reconsider_queue_parameters() after the queue parameter
negotiations.
Also, document why we want this flag enabled in the first place.
Fixes: 1a02f3a73f ("block: move the stable_writes flag to queue_limits")
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 666c53e94c ]
The clocks in fsl_edma_engine::muxclk are allocated and enabled with
devm_clk_get_enabled(), which automatically cleans these resources up,
but these clocks are also manually disabled in fsl_edma_remove(). This
causes warnings on driver removal for each clock:
edma_module already disabled
WARNING: CPU: 0 PID: 418 at drivers/clk/clk.c:1200 clk_core_disable+0x198/0x1c8
[...]
Call trace:
clk_core_disable+0x198/0x1c8 (P)
clk_disable+0x34/0x58
fsl_edma_remove+0x74/0xe8 [fsl_edma]
[...]
---[ end trace 0000000000000000 ]---
edma_module already unprepared
WARNING: CPU: 0 PID: 418 at drivers/clk/clk.c:1059 clk_core_unprepare+0x1f8/0x220
[...]
Call trace:
clk_core_unprepare+0x1f8/0x220 (P)
clk_unprepare+0x34/0x58
fsl_edma_remove+0x7c/0xe8 [fsl_edma]
[...]
---[ end trace 0000000000000000 ]---
Fix these warnings by removing the unnecessary fsl_disable_clocks() call
in fsl_edma_remove().
Fixes: a9903de3aa ("dmaengine: fsl-edma: refactor using devm_clk_get_enabled")
Signed-off-by: Jared Kangas <jkangas@redhat.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260113-fsl-edma-clock-removal-v1-1-2025b49e7bcc@redhat.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f42033b5ce ]
The lpg_lut_store() function currently ignores the return value of
regmap_bulk_write() and always returns 0. This can cause hardware write
failures to go undetected, leading the caller to believe LUT programming
succeeded when it may have failed.
Check the return value of regmap_bulk_write() in lpg_lut_store and return
the error to the caller on failure.
Fixes: 24e2d05d1b ("leds: Add driver for Qualcomm LPG")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20260108175133.638-1-vulab@iscas.ac.cn
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 353353309b ]
of_parse_phandle_with_args() returns a device_node pointer with refcount
incremented in gpiospec.np. The loop iterates through all phandles but
never releases the reference, causing a refcount leak on each iteration.
Add of_node_put() calls to release the reference after extracting the
needed arguments and on the error path when devm_kzalloc() fails.
This bug was detected by our static analysis tool and verified by my
code review.
Fixes: a1a277eb76 ("pinctrl: single: create new gpio function range")
Signed-off-by: Wei Li <unsw.weili@gmail.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eabf273c84 ]
The i2s2_data function is available on both gpio12 and gpio13. Fix the
groups definition.
Fixes: 6e261d1090 ("pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62b44ebc1f ]
spi->irq from request_threaded_irq() not released when
iio_device_register() fails. Add an return value check and jump to a
common error handler when iio_device_register() fails.
Fixes: 9a4936dc89 ("staging:iio:accel:sca3000 Tidy up probe order to avoid a race.")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1992330d90 ]
Syzbot reported a KMSAN uninit-value issue in ovl_fill_real.
This iusse's call chain is:
__do_sys_getdents64()
-> iterate_dir()
...
-> ext4_readdir()
-> fscrypt_fname_alloc_buffer() // alloc
-> fscrypt_fname_disk_to_usr // write without tail '\0'
-> dir_emit()
-> ovl_fill_real() // read by strcmp()
The string is used to store the decrypted directory entry name for an
encrypted inode. As shown in the call chain, fscrypt_fname_disk_to_usr()
write it without null-terminate. However, ovl_fill_real() uses strcmp() to
compare the name against "..", which assumes a null-terminated string and
may trigger a KMSAN uninit-value warning when the buffer tail contains
uninit data.
Reported-by: syzbot+d130f98b2c265fae5297@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d130f98b2c265fae5297
Fixes: 4edb83bb10 ("ovl: constant d_ino for non-merge dirs")
Signed-off-by: Qing Wang <wangqing7171@gmail.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://patch.msgid.link/20260128132406.23768-2-amir73il@gmail.com
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c0b4a4feeb ]
When calling of_parse_phandle_with_fixed_args(), the caller is
responsible to call of_node_put() to release the reference of device
node.
In pinbank_init(), the reference of the node obtained from the
"gpio-ranges" property is never released, resulting in a reference
count leak.
Add the missing of_node_put() call to fix the leak.
Fixes: 1948d5c51d ("pinctrl: Add pinmux & GPIO controller driver for a new SoC")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f1195ca3b4 ]
bdc_run() can be ran during atomic context leading to a sleep during
atomic warning. Fix this by replacing read_poll_timeout() with
read_poll_timeout_atomic().
Fixes: 75ae051efc ("usb: gadget: bdc: use readl_poll_timeout() to simplify code")
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20260120200754.2488765-1-justin.chen@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b010880b99 ]
Regulator requesting may result in deferred probing error which will
abort driver probing. To avoid this just use dev_err_probe which handles
deferred probing.
Fixes: 3904b28efb ("iio: gyro: Add driver for the MPU-3050 gyroscope")
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ed50d7792 ]
Reorder the of_device_id structures so that they are in alphabetical
order.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Stable-dep-of: 8f34c1a64c ("mfd: simple-mfd-i2c: Add Delta TN48M CPLD support")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6fc5d415c1 ]
Enable support for the RTC and regulators found in the SpacemiT P1
PMIC. Support is implemented by the simple I2C MFD driver.
The P1 PMIC is normally implemented with the SpacemiT K1 SoC. This
PMIC provides 6 buck converters and 12 LDO regulators. It also
implements a switch, watchdog timer, real-time clock, and more.
Initially its RTC and regulators are supported.
Signed-off-by: Alex Elder <elder@riscstar.com>
Link: https://lore.kernel.org/r/20250825172057.163883-3-elder@riscstar.com
Signed-off-by: Lee Jones <lee@kernel.org>
Stable-dep-of: 8f34c1a64c ("mfd: simple-mfd-i2c: Add Delta TN48M CPLD support")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 81a2c31257 ]
The QIXIS FPGA found on Layerscape boards such as LX2160AQDS, LS1028AQDS
etc deals with power-on-reset timing, muxing etc. Use the simple-mfd-i2c
as its core driver by adding its compatible string (already found in
some dt files). By using the simple-mfd-i2c driver, any child device
will have access to the i2c regmap created by it.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20250707153120.1371719-1-ioana.ciornei@nxp.com
Signed-off-by: Lee Jones <lee@kernel.org>
Stable-dep-of: 8f34c1a64c ("mfd: simple-mfd-i2c: Add Delta TN48M CPLD support")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4feb753ba6 ]
The wm5102_clear_write_sequencer() helper may return an error
and just return, bypassing the cleanup sequence and causing
regulators to remain enabled, leading to a resource leak.
Change the direct return to jump to the err_reset label to
properly free the resources.
Fixes: 1c1c6bba57 ("mfd: wm5102: Ensure we always boot the device fully")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251214145804.2037-1-vulab@iscas.ac.cn
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ff112f1ecd ]
This reverts commit aced969e9b.
It was determined that this was not the correct "fix", so should be
reverted.
Fixes: aced969e9b ("mmc: rtsx_pci_sdmmc: increase power-on settling delay to 5ms")
Cc: Matthew Schwartz <matthew.schwartz@linux.dev>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4dd5d4c036 ]
During the probe the refclk_pad pointer is set to NULL if the
'fsl,refclk-pad-mode' property is not defined in the devicetree node. But
in imx_hsio_configure_clk_pad() this pointer is unconditionally used which
could result in a NULL pointer dereference. So check the pointer before to
use it.
Fixes: 82c56b6dd2 ("phy: freescale: imx8qm-hsio: Add i.MX8QM HSIO PHY driver support")
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
Link: https://patch.msgid.link/20260114-phy-fsl-imx8qm-hsio-fix-null-pointer-dereference-v1-1-730e941be464@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1feb0377b9 ]
When changes [1] and [2] have been applied to the driver etm4x, the
same modifications have been also collapsed in [3] and applied in
one shot to the driver etm3x.
While doing this, the driver etm3x has not been aligned to etm4x on
the use of non cpuslocked version of cpuhp callback setup APIs.
The current code triggers two run-time warnings when the kernel is
compiled with CONFIG_PROVE_LOCKING=y.
Use non cpuslocked version of cpuhp callback setup APIs in driver
etm3x, aligning it to the driver etm4x.
[1] commit 2d1a8bfb61 ("coresight: etm4x: Fix etm4_count race by
moving cpuhp callbacks to init")
[2] commit 22a550a306 ("coresight: etm4x: Allow etm4x to be built
as a module")
[3] commit 97fe626ce6 ("coresight: etm3x: Allow etm3x to be built
as a module")
Fixes: 97fe626ce6 ("coresight: etm3x: Allow etm3x to be built as a module")
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260108152427.357379-1-antonio.borneo@foss.st.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f2d8d79cc ]
The PM reference count is not expected to be incremented on return in
functions starfive_wdt_probe.
However, pm_runtime_get_sync will increment pm usage counter
even failed. Forgetting to putting operation will result in a
reference leak here.
Replace it with pm_runtime_resume_and_get to keep usage
counter balanced.
Fixes: db728ea9c7 ("drivers: watchdog: Add StarFive Watchdog driver")
Signed-off-by: Kery Qi <qikeyu2017@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d63403d4e3 ]
A sign change is needed for proper calculation of the pressure.
This is a minor fix since it only affects users that might have custom
silicon from Honeywell that has honeywell,pmin-pascal != 0.
Also due to the fact that raw pressure values can not be lower
than output_min (400k-3.3M) there is no need to calculate a decimal for
the offset.
Fixes: 713337d914 ("iio: pressure: Honeywell mprls0025pa pressure sensor")
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
