Commit graph

276,794 commits

Author SHA1 Message Date
Sage Weil
a2a79609c0 libceph: add missing breaks in addr_set_port
Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-19 11:25:05 -07:00
Sage Weil
0417788226 libceph: fix TAG_WAIT case
If we get a WAIT as a client something went wrong; error out.  And don't
fall through to an unrelated case.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-19 11:25:04 -07:00
Sage Weil
da39822c65 ceph: fix broken comparison in readdir loop
Both off and fi->offset are unsigned, so the difference is always >= 0.
Compare them directly instead of the sign of the difference.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-19 11:25:04 -07:00
Sage Weil
31456665a0 libceph: fix osdmap timestamp assignment
Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-19 11:25:03 -07:00
Sage Weil
3540303f87 ceph: fix rare potential cap leak
If we grab new_cap, retake the lock, and find we already have a cap now
for the given mds, release new_cap.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-19 11:25:03 -07:00
Sage Weil
12a2f643b0 libceph: use snprintf for unknown addrs
Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-19 11:25:03 -07:00
Sage Weil
2dab036b8c libceph: use snprintf for formatting object name
Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-19 11:25:02 -07:00
Sage Weil
ae59808301 ceph: use snprintf for dirstat content
We allocate a buffer for rstats if the dirstat option is enabled.  Use
snprintf.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-19 11:25:02 -07:00
Sage Weil
e8f54ce169 libceph: fix uninitialized value when no get_authorizer method is set
If there is no get_authorizer method we set the out_kvec to a bogus
pointer.  The length is also zero in that case, so it doesn't much matter,
but it's better not to add the empty item in the first place.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-19 11:25:02 -07:00
Sage Weil
1b36698577 libceph: remove unused variable
Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-19 11:24:17 -07:00
Sage Weil
0da5d70369 libceph: handle connection reopen race with callbacks
If a connection is closed and/or reopened (ceph_con_close, ceph_con_open)
it can race with a callback.  con_work does various state checks for
closed or reopened sockets at the beginning, but drops con->mutex before
making callbacks.  We need to check for state bit changes after retaking
the lock to ensure we restart con_work and execute those CLOSED/OPENING
tests or else we may end up operating under stale assumptions.

In Jim's case, this was causing 'bad tag' errors.

There are four cases where we re-take the con->mutex inside con_work: catch
them all and return EAGAIN from try_{read,write} so that we can restart
con_work.

Reported-by: Jim Schutt <jaschut@sandia.gov>
Tested-by: Jim Schutt <jaschut@sandia.gov>
Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-19 11:21:05 -07:00
Sage Weil
3b66378034 ceph: take reference on mds request r_unsafe_dir
We put ourselves on an inode list for the parent directory of metadata
operations so that an fsync on the directory will wait for metadata updates
to commit to disk.  We weren't holding a reference to that directory,
however, and under certain workloads (fsstress in this case) the directory
can go away.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-19 11:20:07 -07:00
Mohammed Shafi Shajakhan
c6e38c06cb ath9k: use PS wakeup before REG_READ
otherwise we will get deadbeef when the station is in idle state

Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19 13:54:20 -04:00
Luciano Coelho
a2cd43c52a nl80211: remove some stack variables in trigger_scan and start_sched_scan
Some stack variables (name *ssid and *channel) are only used to define
the size of the memory block that needs to be allocated for the
request structure in the nl80211_trigger_scan() and
nl80211_start_sched_scan() functions.

This is unnecessary because the sizes of the actual elements in the
structure can be used instead.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19 13:54:17 -04:00
Javier Cardona
d676ff493d mac80211: Don't sleep when growing the mesh path
After commit 1928ecab62 (mac80211: fix and
simplify mesh locking) mesh table allocation is performed with the
pathtbl_resize_lock taken.  Under those conditions one should not sleep.
This patch makes the allocations GFP_ATOMIC to prevent that.

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19 13:54:14 -04:00
Felix Fietkau
ba4903f97a ath9k: implement .tx_last_beacon()
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19 13:54:11 -04:00
Rafał Miłecki
755173291a b43: read PHY info only when needed (for PHY-A)
We risk reading TMSHIGH register twice, but PHY-A are really rare and we
do not support them at the moment.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19 13:54:09 -04:00
Rafał Miłecki
1495298ddd b43: separate ssb core reset
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19 13:54:09 -04:00
Rafał Miłecki
c4a2a08165 b43: add helper for finding GPIO device
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19 13:54:08 -04:00
Rafał Miłecki
05100a29cb b43: dma: cache translation (routing bits)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19 13:54:07 -04:00
Rafał Miłecki
0355a3452f b43: make b43_wireless_init less bus specific
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19 13:54:07 -04:00
Rafał Miłecki
620d785ba9 b43: add helpers for block R/W ops
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19 13:54:06 -04:00
Felix Fietkau
ac56703e0e ath9k: fix ad-hoc nexttbtt calculation
rounding up the delta between last-beacon-tsf and tsf to intval is wrong
and can lead to misconfigured timers which breaks beacon transmission.
Fix this by adding intval and subtracting the offset of the tsf within the
current slot.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19 13:54:05 -04:00
Sujith Manoharan
5b68138e56 ath9k: Drag the driver to the year 2011
The Times They Are a-Changin'.

Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19 13:54:05 -04:00
Mohammed Shafi Shajakhan
a455c57ed3 ath_hw: Fix bssid mask documentation
Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19 13:54:04 -04:00
Sujith Manoharan
89ea674565 ath9k_htc: Fix packet timeout
The WMI tx status event timeout was not aligning with the
TX cleanup timer threshold value. Fix this to handle dropped
packets.

Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19 13:54:03 -04:00
Sujith Manoharan
d108e8b932 ath9k_htc: Change credit limit for UB94/95
Reduce the credit size for UB94/95 to fix target hangs.

Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19 13:54:03 -04:00
Sujith Manoharan
bd54879958 ath9k_htc: Fix max subframe handling
Commit "ath9k_htc: Fix AMPDU subframe handling" registered the maximum
subframe limit of the driver with mac80211, which was used in ADDBA
negotiation. While technically correct, this causes inter-operability issues
with a few APs. Revert to the older behavior to fix this.

Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19 13:54:02 -04:00
Sujith Manoharan
0cd075d74b ath9k_htc: Fix BSSID calculation
The BSSID/AID has to be set for the first associated station interface.
Subsequent interfaces may move out of assoc/disassoc status, in which
case, the BSSID has to be re-calculated from the available interfaces.
Also, ANI should be enabled or disabled based on the current opmode.

Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19 13:54:01 -04:00
Sujith Manoharan
33a5315f97 ath9k_htc: Fix RX filter calculation
Choose the MY_BEACON filter only in case of a single interface.
Also, set the ATH9K_RX_FILTER_MCAST_BCAST_ALL filter in case
of interfaces.

Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19 13:54:01 -04:00
Sujith Manoharan
db32124a3f ath9k_htc: Recalculate the BSSID mask on interface
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19 13:54:00 -04:00
Sujith Manoharan
84dfa7308c ath9k_htc: Fix station flags
The FW does absolutely nothing with the station flags,
so remove them. But keep the field around since it might
come in handy in the future.

Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19 13:53:59 -04:00
Sujith Manoharan
c75197a779 ath9k_htc: Fix mode selection
Remove all the unsupported modes like FH, TURBO etc.
Since this requires a FW update, increase the fw version to 1.3

Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19 13:53:59 -04:00
Daniel Halperin
20ba2861b0 iwlwifi: remove unused parameter from iwl_hcmd_queue_reclaim
cmd_index is never used.

Signed-off-by: Daniel Halperin <dhalperi@cs.washington.edu>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19 13:53:58 -04:00
Marc Yang
62a5b7dcee mwifiex: adjust high/low water marks for tx_pending queue
This is to fix an issue that the throughput of the higher priority
stream gets dropped when a lower priority stream is present.

Signed-off-by: Marc Yang <yangyang@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19 13:53:57 -04:00
Marc Yang
17e8cec875 mwifiex: CPU mips optimization with NO_PKT_PRIO_TID
If we go through the entire for loop in
mwifiex_wmm_get_highest_priolist_ptr() and don't find any packets,
set highest_queued_prio to NO_PKT_PRIO_TID (< LOW_PRIO_TID).

Signed-off-by: Marc Yang <yangyang@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19 13:53:57 -04:00
Marc Yang
9396814787 mwifiex: check mwifiex_wmm_lists_empty() before dequeue
add checks to mwifiex_wmm_process_tx() loop so it doesn't re-enter
mwifiex_dequeue_tx_packet() to find it can't send.

Signed-off-by: Marc Yang <yangyang@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19 13:53:56 -04:00
Marc Yang
49729ff616 mwifiex: reduce CPU usage by tracking highest_queued_prio
This patch adds highest_queued_prio to track priority of packets as
they are enqueued so that mwifiex_wmm_get_highest_priolist_ptr()
starts checking at the first level where we have packets, instead of
the highest. The function also lowers priority value to the level
where first packet is found.

Signed-off-by: Marc Yang <yangyang@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19 13:53:55 -04:00
Marc Yang
f699254c71 mwifiex: reduce CPU usage by tracking tx_pkts_queued
This patch adds tx_pkts_queued to track number of packets being
enqueued & dequeued so that mwifiex_wmm_lists_empty() evaluation
is lightweight.

Signed-off-by: Marc Yang <yangyang@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19 13:53:55 -04:00
Rhyland Klein
7176ba23f8 net: rfkill: add generic gpio rfkill driver
This adds a new generic gpio rfkill driver to support rfkill switches
which are controlled by gpios. The driver also supports passing in
data about the clock for the radio, so that when rfkill is blocking,
it can disable the clock.

This driver assumes platform data is passed from the board files to
configure it for specific devices.

Original-patch-by: Anantha Idapalapati <aidapalapati@nvidia.com>
Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19 13:53:54 -04:00
Felix Fietkau
c6820f1e6c ath9k: fix ad-hoc mode beacon selection
In ad-hoc mode, beacon timers are configured differently compared to AP
mode, and (depending on the scenario) can vary enough to make the beacon
tasklet not detect slot 0 based on the TSF.
Since staggered beacons are not (and cannot be) used in ad-hoc mode, it
makes more sense to just hardcode slot 0 here, avoiding unnecessary
TSF reads and calculations.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Reported-by: Rajkumar Manoharan <rmanoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19 13:53:54 -04:00
Ingo Molnar
29510ec3b6 Merge branch 'tip/perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into perf/core 2011-05-19 19:48:03 +02:00
Ingo Molnar
398995ce79 Merge branch 'tip/perf/core-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into perf/core 2011-05-19 19:25:55 +02:00
Dave Chinner
bf59170a66 xfs: obey minleft values during extent allocation correctly
When allocating an extent that is long enough to consume the
remaining free space in an AG, we need to ensure that the allocation
leaves enough space in the AG for any subsequent bmap btree blocks
that are needed to track the new extent. These have to be allocated
in the same AG as we only reserve enough blocks in an allocation
transaction for modification of the freespace trees in a single AG.

xfs_alloc_fix_minleft() has been considering blocks on the AGFL as
free blocks available for extent and bmbt block allocation, which is
not correct - blocks on the AGFL are there exclusively for the use
of the free space btrees. As a result, when minleft is less than the
number of blocks on the AGFL, xfs_alloc_fix_minleft() does not trim
the given extent to leave minleft blocks available for bmbt
allocation, and hence we can fail allocation during bmbt record
insertion.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
2011-05-19 12:03:48 -05:00
Dave Chinner
44396476a0 xfs: reset buffer pointers before freeing them
When we free a vmapped buffer, we need to ensure the vmap address
and length we free is the same as when it was allocated. In various
places in the log code we change the memory the buffer is pointing
to before issuing IO, but we never reset the buffer to point back to
it's original memory (or no memory, if that is the case for the
buffer).

As a result, when we free the buffer it points to memory that is
owned by something else and attempts to unmap and free it. Because
the range does not match any known mapped range, it can trigger
BUG_ON() traps in the vmap code, and potentially corrupt the vmap
area tracking.

Fix this by always resetting these buffers to their original state
before freeing them.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
2011-05-19 12:03:45 -05:00
Dave Chinner
ee58abdfcc xfs: avoid getting stuck during async inode flushes
When the underlying inode buffer is locked and xfs_sync_inode_attr()
is doing a non-blocking flush, xfs_iflush() can return EAGAIN.  When
this happens, clear the error rather than returning it to
xfs_inode_ag_walk(), as returning EAGAIN will result in the AG walk
delaying for a short while and trying again. This can result in
background walks getting stuck on the one AG until inode buffer is
unlocked by some other means.

This behaviour was noticed when analysing event traces followed by
code inspection and verification of the fix via further traces.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
2011-05-19 12:03:42 -05:00
Dave Chinner
e57375153d xfs: fix xfs_itruncate_start tracing
Variables are ordered incorrectly in trace call.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
2011-05-19 12:03:36 -05:00
Dave Chinner
1beb65ad45 xfs: fix duplicate workqueue initialisation
The workqueue initialisation function is called twice when
initialising the XFS subsystem. Remove the second initialisation
call.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
2011-05-19 12:03:24 -05:00
Joe Perches
e69522a8cc xfs: kill off xfs_printk()
xfs_alert_tag() can be defined using xfs_alert(), and thereby avoid
using xfs_printk() altogether.  This is the only remaining use of
xfs_printk(), so changing it this way means xfs_printk() can simply
be eliminated.can simply be eliminated.can simply be eliminated.can
simply be eliminated.can simply be eliminated.can simply be
eliminated.can simply be eliminated.can simply be eliminated.can
simply be eliminated.

Also add format checking to the non-debug inline function xfs_debug.
Miscellaneous function prototype argument alignment.

(Updated to delete the definition of xfs_printk(), which is
no longer used or needed.)

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
2011-05-19 11:38:09 -05:00
Catalin Marinas
9b090f2da8 kmemleak: Initialise kmemleak after debug_objects_mem_init()
Kmemleak frees objects via RCU and when CONFIG_DEBUG_OBJECTS_RCU_HEAD
is enabled, the RCU callback triggers a call to free_object() in
lib/debugobjects.c. Since kmemleak is initialised before debug objects
initialisation, it may result in a kernel panic during booting. This
patch moves the kmemleak_init() call after debug_objects_mem_init().

Reported-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Tested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: <stable@kernel.org>
2011-05-19 17:36:37 +01:00