Commit graph

276,794 commits

Author SHA1 Message Date
Catalin Marinas
79e0d9bd26 kmemleak: Select DEBUG_FS unconditionally in DEBUG_KMEMLEAK
In the past DEBUG_FS used to depend on SYSFS and DEBUG_KMEMLEAK selected
it conditionally. This is no longer the case, so always select DEBUG_FS
via DEBUG_KMEMLEAK.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2011-05-19 17:36:27 +01:00
Catalin Marinas
52c3ce4ec5 kmemleak: Do not return a pointer to an object that kmemleak did not get
The kmemleak_seq_next() function tries to get an object (and increment
its use count) before returning it. If it could not get the last object
during list traversal (because it may have been freed), the function
should return NULL rather than a pointer to such object that it did not
get.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Phil Carmody <ext-phil.2.carmody@nokia.com>
Acked-by: Phil Carmody <ext-phil.2.carmody@nokia.com>
Cc: <stable@kernel.org>
2011-05-19 17:35:28 +01:00
Madis Janson
39dfe13870 ALSA: hda - Enable Realtek ALC269 codec input layer beep
This fixes the input layer beep not working on some EeePC 1000 models by
adding the subsystem id into whitelist. Otherwise the corresponding ALSA
mixer is not enabled and stays muted, resulting in no console beep.

Signed-off-by: Madis Janson <madis@cyber.ee>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-19 18:32:41 +02:00
Geert Uytterhoeven
659e6ed55f input/atari: Fix mouse movement and button mapping
Up and down movements were reversed, left and right buttons were swapped.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-05-19 18:19:12 +02:00
Michael Schmitz
186f200a95 input/atari: Fix atarimouse init
Atarimouse fails to load as a module (with ENODEV), due to a brown paper
bag bug, misinterpreting the semantics of atari_keyb_init().

[geert] Propagate the return value of atari_keyb_init() everywhere

Signed-off-by: Michael Schmitz <schmitz@debian.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-05-19 18:19:11 +02:00
Michael Schmitz
7786908c3c input/atari: Use the correct mouse interrupt hook
The Atari keyboard driver calls atari_mouse_interrupt_hook if it's set, not
atari_input_mouse_interrupt_hook. Fix below.

[geert] Killed off atari_mouse_interrupt_hook completely, after fixing another
incorrect assignment in atarimouse.c.

Signed-off-by: Michael Schmitz <schmitz@debian.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-05-19 18:19:11 +02:00
Geert Uytterhoeven
79abeed6ee m68k/atari: Do not use "/" in interrupt names
It may trigger a warning in fs/proc/generic.c:__xlate_proc_name() when
trying to add an entry for the interrupt handler to sysfs.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-05-19 18:19:10 +02:00
Geert Uytterhoeven
1fc74ac612 m68k: unistd - Comment out definitions for unimplemented syscalls
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-05-19 18:19:10 +02:00
Geert Uytterhoeven
d6d42bb2f8 m68k: Really wire up sys_pselect6 and sys_ppoll
We reserved the numbers a long time ago, but never wired them up in the
syscall table as they need TIF_RESTORE_SIGMASK, which we only got last year
in commit cb6831d5d3099e772a510eb3e1ed0760ccffb45e ("m68k: Switch to saner
sigsuspend()")

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Cc: stable@kernel.org
2011-05-19 18:19:10 +02:00
Geert Uytterhoeven
c4245c9d65 m68k: Merge mmu and non-mmu versions of sys_call_table
Impact for nommu:
  - Store table in .rodata instead of .text,
  - Let kernel/sys_ni.c handle the stubbing of MMU-only syscalls,
  - Implement sys_mremap and sys_nfsservct,
  - Remove unused padding at the end of the table.

Impact for mmu:
  - Store table in .rodata instead of .data.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
2011-05-19 18:19:10 +02:00
Geert Uytterhoeven
6cf515e113 MAINTAINERS: Roman Zippel has been MIA for several years.
Hence make AFFS and HFS orphans, and remove him as an m68k maintainer.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-05-19 18:19:09 +02:00
Geert Uytterhoeven
f82a519f12 m68k: bitops - Never step beyond the end of the bitmap
find_next bitops on m68k (find_next_zero_bit, find_next_bit, and
find_next_bit_le) may cause out of bounds memory access
when the bitmap size in bits % 32 != 0 and offset (the bitnumber
to start searching at) is very close to the bitmap size.

For example,

       unsigned long bitmap[2] = { 0, 0 };
       find_next_bit(bitmap, 63, 62);

1. find_next_bit() tries to find any set bits in bitmap[1],
   but no bits set.

2. Then find_first_bit(bimap + 2, -1)

3. Unfortunately find_first_bit() takes unsigned int as the size argument.

4. find_first_bit will access bitmap[2~] until it find any set bits.

Add missing tests for stepping beyond the end of the bitmap to all
find_{first,next}_*() functions, and make sure they never return a value
larger than the bitmap size.

Reported-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-05-19 18:19:09 +02:00
Geert Uytterhoeven
359c47ea71 m68k: bitops - offset == ((long)p - (long)vaddr) * 8
Hence use "offset" in find_next_{,zero_}bit(), like is already done for
find_next_{,zero_}bit_le()

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-05-19 18:19:09 +02:00
Dmitry Eremin-Solenikov
df1fe13289 ALSA: intel8x0m: enable AMD8111 modem
AMD 8111 southbridges contain a controller for MC'97 modem. Enable support
for this controller in intel8x0m driver.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-19 18:06:26 +02:00
Daniel Kiper
887cb45694 drivers/xen/sys-hypervisor: Cleanup code/data sections definitions
Cleanup code/data sections definitions
accordingly to include/linux/init.h.

Signed-off-by: Daniel Kiper <dkiper@net-space.pl>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-05-19 11:30:41 -04:00
Daniel Kiper
b53cedebd7 arch/x86/xen/smp: Cleanup code/data sections definitions
Cleanup code/data sections definitions
accordingly to include/linux/init.h.

Signed-off-by: Daniel Kiper <dkiper@net-space.pl>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-05-19 11:30:40 -04:00
Daniel Kiper
fb6ce5dea4 arch/x86/xen/time: Cleanup code/data sections definitions
Cleanup code/data sections definitions
accordingly to include/linux/init.h.

Signed-off-by: Daniel Kiper <dkiper@net-space.pl>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-05-19 11:30:39 -04:00
Daniel Kiper
ad7ba09e65 arch/x86/xen/xen-ops: Cleanup code/data sections definitions
Cleanup code/data sections definitions
accordingly to include/linux/init.h.

Signed-off-by: Daniel Kiper <dkiper@net-space.pl>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-05-19 11:30:39 -04:00
Daniel Kiper
3f508953dd arch/x86/xen/mmu: Cleanup code/data sections definitions
Cleanup code/data sections definitions
accordingly to include/linux/init.h.

Signed-off-by: Daniel Kiper <dkiper@net-space.pl>
[v1: Rebased on top of latest linus's to include fixes in mmu.c]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-05-19 11:30:29 -04:00
Guenter Roeck
83f7649c52 hwmon: (pmbus) Add support for Analog Devices ADM1275
Add support for Analog Devices ADM1275 Hot-Swap Controller and Digital Power
Monitor

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Tom Grennan <tom.grennan@ericsson.com>
2011-05-19 08:19:41 -07:00
Guenter Roeck
0c0a061516 hwmon: (pmbus) Support for TI UCD90xxx series Sequencer and System Health Controllers
Hardware monitoring support for TI UCD90120, UCD90124, UCD9090, and UCD90910
Sequencer and System Health Controllers.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Tom Grennan <tom.grennan@ericsson.com>
2011-05-19 08:19:40 -07:00
Guenter Roeck
84fc4585c1 hwmon: (pmbus) Add support for TI UCD9200 series of PWM System Controllers
This patch adds hardware monitoring support for TI UCD9220, UCD9222, UCD9224,
UCD9240, UCD9244, UCD9246, and UCD9248 Digital PWM System Controllers.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Tom Grennan <tom.grennan@ericsson.com>
2011-05-19 08:19:39 -07:00
Guenter Roeck
6586b14c7b hwmon: (pmbus) Use device specific function to read fan configuration
Fan control implementation tends to be device specific, so start using
the device specific function call to read fan configuration registers.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Tom Grennan <tom.grennan@ericsson.com>
2011-05-19 08:19:39 -07:00
Guenter Roeck
2cfa6aedb3 hwmon: (pmbus) Expand scope of device specific get_status function
Some devices use non-standard registers to access various functionality.
This does not only affect status registers, but other registers as well.
Rename local get_status function to get_byte_data to reflect this requirement.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Tom Grennan <tom.grennan@ericsson.com>
2011-05-19 08:19:38 -07:00
Guenter Roeck
b4ce237b7f hwmon: (pmbus) Introduce infrastructure to detect sensors and limit registers
This commit replaces hard-coded sensor and limit register detection code
with table based sensor detection. This change eliminates code block repetition
and reduces code size.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Tom Grennan <tom.grennan@ericsson.com>
2011-05-19 08:19:37 -07:00
Guenter Roeck
f5bae2642e hwmon: Driver for MAX16065 System Manager and compatibles
This patch adds hardware monitoring support for Maxim MAX16065, MAX16066,
MAX16067, MAX16068, MAX16070, and MAX16071 flash-configurable system managers
with nonvolatile fault registers.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
2011-05-19 08:19:36 -07:00
Jerome Oufella
82c7465b4d hwmon: (sht15) add support for CRC validation
The sht15 sensor allows validating exchanges to and from the device
using a crc8 function. An utility function to reverse a byte has also
been added.

Signed-off-by: Jerome Oufella <jerome.oufella@savoirfairelinux.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-05-19 08:19:36 -07:00
Vivien Didelot
cc15c7ebb4 hwmon: (sht15) add support for the status register
* Add support for:
  - Heater.
  - End of battery notice.
  - Ability not to reload from OTP.
  - Low resolution (12bit temp, 8bit humidity).
* Add an utility function to read individual bytes from the device.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-05-19 08:19:35 -07:00
Vivien Didelot
181148ae68 hwmon: (sht15) clean-up the probe function
* Move the creation of sysfs attributes after the end of the
  initialization, and remove them in the error path.
* Release regulator in the error path.
* Add a soft reset command (need to wait 11ms before next command).

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-05-19 08:19:34 -07:00
Vivien Didelot
99a0378de9 hwmon: (sht15) general code clean-up
* Add a documentation file for the device.
* Respect a bit more the kernel-doc syntax.
* Rename some variables for clarity.
* Use bool type for flags.
* Use an enum for states (actions being done).

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-05-19 08:19:33 -07:00
Per Dalén
83bffbce74 hwmon: Add support for MAX6642
MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor with
Overtemperature Alarm from Maxim.

Signed-off-by: Per Dalen <per.dalen@appeartv.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-05-19 08:19:32 -07:00
Jouni Malinen
ed9d01026f cfg80211: Use consistent BSS matching between scan and sme
cfg80211 scan code adds separate BSS entries if the same BSS shows up
on multiple channels. However, sme implementation does not use the
frequency when fetching the BSS entry. Fix this by adding channel
information to cfg80211_roamed() and include it in cfg80211_get_bss()
calls.

Please note that drivers using cfg80211_roamed() need to be modified to
fully implement this fix. This commit includes only minimal changes to
avoid compilation issues; it maintains the old (broken) behavior for
most drivers. ath6kl was the only one that I could test, so I updated
it to provide the operating frequency in the roamed event.

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19 10:37:18 -04:00
Rajkumar Manoharan
79d2b1570b ath9k: Fix power save wrappers in debug ops
Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19 10:32:33 -04:00
Steve French
ceec1e0fae [CIFS] Remove sparse warning
Move extern for cifsConvertToUCS to different header to prevent following warning:

CHECK   fs/cifs/cifs_unicode.c
fs/cifs/cifs_unicode.c:267:1: warning: symbol 'cifsConvertToUCS' was not declared. Should it be static?

Signed-off-by: Steve French <sfrench@us.ibm.com>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-05-19 14:10:56 +00:00
Steve French
4e64fb33de [CIFS] Update cifs to version 1.72
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-05-19 14:10:56 +00:00
Shirish Pargaonkar
c4aca0c09f cifs: Change key name to cifs.idmap, misc. clean-up
Change idmap key name from cifs.cifs_idmap to cifs.idmap.
Removed unused structure wksidarr and function match_sid().
Handle errors correctly in function init_cifs().

Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-05-19 14:10:56 +00:00
Sean Finney
f14bcf71d1 cifs: Unconditionally copy mount options to superblock info
Previously mount options were copied and updated in the cifs_sb_info
struct only when CONFIG_CIFS_DFS_UPCALL was enabled.  Making this
information generally available allows us to remove a number of ifdefs,
extra function params, and temporary variables.

Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Sean Finney <seanius@seanius.net>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-05-19 14:10:55 +00:00
Sean Finney
5167f11ec9 cifs: Use kstrndup for cifs_sb->mountdata
A relatively minor nit, but also clarified the "consensus" from the
preceding comments that it is in fact better to try for the kstrdup
early and cleanup while cleaning up is still a simple thing to do.

Reviewed-By: Steve French <smfrench@gmail.com>
Signed-off-by: Sean Finney <seanius@seanius.net>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-05-19 14:10:55 +00:00
Sean Finney
046462abca cifs: Simplify handling of submount options in cifs_mount.
With CONFIG_DFS_UPCALL enabled, maintain the submount options in
cifs_sb->mountdata, simplifying the code just a bit as well as making
corner-case allocation problems less likely.

Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Sean Finney <seanius@seanius.net>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-05-19 14:10:55 +00:00
Sean Finney
b946845a9d cifs: cifs_parse_mount_options: do not tokenize mount options in-place
To keep strings passed to cifs_parse_mount_options re-usable (which is
needed to clean up the DFS referral handling), tokenize a copy of the
mount options instead.  If values are needed from this tokenized string,
they too must be duplicated (previously, some options were copied and
others duplicated).

Since we are not on the critical path and any cleanup is relatively easy,
the extra memory usage shouldn't be a problem (and it is a bit simpler
than trying to implement something smarter).

Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Sean Finney <seanius@seanius.net>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-05-19 14:10:54 +00:00
Sean Finney
c1508ca236 cifs: Add support for mounting Windows 2008 DFS shares
Windows 2008 CIFS servers do not always return PATH_NOT_COVERED when
attempting to access a DFS share.  Therefore, when checking for remote
shares, unconditionally ask for a DFS referral for the UNC (w/out prepath)
before continuing with previous behavior of attempting to access the UNC +
prepath and checking for PATH_NOT_COVERED.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=31092

Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Sean Finney <seanius@seanius.net>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-05-19 14:10:54 +00:00
Sean Finney
dd61394586 cifs: Extract DFS referral expansion logic to separate function
The logic behind the expansion of DFS referrals is now extracted from
cifs_mount into a new static function, expand_dfs_referral.  This will
reduce duplicate code in upcoming commits.

Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Sean Finney <seanius@seanius.net>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-05-19 14:10:54 +00:00
Jeff Layton
460458ce8e cifs: turn BCC into a static inlined function
It's a bad idea to have macro functions that reference variables more
than once, as the arguments could have side effects. Turn BCC() into
a static inlined function instead.

While we're at it, make it return a void * to discourage anyone from
dereferencing it as-is.

Reported-and-acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-05-19 14:10:53 +00:00
Jeff Layton
820a803ffa cifs: keep BCC in little-endian format
This is the same patch as originally posted, just with some merge
conflicts fixed up...

Currently, the ByteCount is usually converted to host-endian on receive.
This is confusing however, as we need to keep two sets of routines for
accessing it, and keep track of when to use each routine. Munging
received packets like this also limits when the signature can be
calulated.

Simplify the code by keeping the received ByteCount in little-endian
format. This allows us to eliminate a set of routines for accessing it
and we can now drop the *_le suffixes from the accessor functions since
that's now implied.

While we're at it, switch all of the places that read the ByteCount
directly to use the get_bcc inline which should also clean up some
unaligned accesses.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-05-19 14:10:53 +00:00
Jeff Layton
0e6e37a7a8 cifs: fix some unused variable warnings in id_rb_search
fs/cifs/cifsacl.c: In function ‘id_rb_search’:
fs/cifs/cifsacl.c:215:19: warning: variable ‘linkto’ set but not used
[-Wunused-but-set-variable]
fs/cifs/cifsacl.c:214:18: warning: variable ‘parent’ set but not used
[-Wunused-but-set-variable]

Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-05-19 14:10:52 +00:00
Pavel Shilovsky
6feb9891da CIFS: Simplify invalidate part (try #5)
Simplify many places when we call cifs_revalidate/invalidate to make
it do what it exactly needs.

Reviewed-by: Jeff Layton <jlayton@samba.org>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-05-19 14:10:52 +00:00
Pavel Shilovsky
0b81c1c405 CIFS: directio read/write cleanups
Recently introduced strictcache mode brought a new code that can be
efficiently used by directio part. That's let us add vectored operations
and break unnecessary cifs_user_read and cifs_user_write.

Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-05-19 14:10:51 +00:00
Steve French
be8e3b0044 consistently use smb_buf_length as be32 for cifs (try 3)
There is one big endian field in the cifs protocol, the RFC1001
       length, which cifs code (unlike in the smb2 code) had been handling as
       u32 until the last possible moment, when it was converted to be32 (its
       native form) before sending on the wire.   To remove the last sparse
       endian warning, and to make this consistent with the smb2
       implementation  (which always treats the fields in their
       native size and endianness), convert all uses of smb_buf_length to
       be32.

       This version incorporates Christoph's comment about
       using be32_add_cpu, and fixes a typo in the second
       version of the patch.

Signed-off-by: Steve French <sfrench@us.ibm.com>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-05-19 14:10:51 +00:00
Shirish Pargaonkar
9409ae58e0 cifs: Invoke id mapping functions (try #17 repost)
rb tree search and insertion routines.

A SID which needs to be mapped, is looked up in one of the rb trees
depending on whether SID is either owner or group SID.
If found in the tree, a (mapped) id from that node is assigned to
uid or gid as appropriate.  If unmapped, an upcall is attempted to
map the SID to an id.  If upcall is successful, node is marked as
mapped.  If upcall fails, node stays marked as unmapped and a mapping
is attempted again only after an arbitrary time period has passed.

To map a SID, which can be either a Owner SID or a Group SID, key
description starts with the string "os" or "gs" followed by SID converted
to a string. Without "os" or "gs", cifs.upcall does not know whether
SID needs to be mapped to either an uid or a gid.

Nodes in rb tree have fields to prevent multiple upcalls for
a SID.  Searching, adding, and removing nodes is done within global locks.
Whenever a node is either found or inserted in a tree, a reference
is taken on that node.
Shrinker routine prunes a node if it has expired but does not prune
an expired node if its refcount is not zero (i.e. sid/id of that node
is_being/will_be accessed).
Thus a node, if its SID needs to be mapped by making an upcall,
can safely stay and its fields accessed without shrinker pruning it.
A reference (refcount) is put on the node without holding the spinlock
but a reference is get on the node by holding the spinlock.

Every time an existing mapped node is accessed or mapping is attempted,
its timestamp is updated to prevent it from getting erased or a
to prevent multiple unnecessary repeat mapping retries respectively.

For now, cifs.upcall is only used to map a SID to an id (uid or gid) but
it would be used to obtain an SID for an id.

Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-05-19 14:10:51 +00:00
Shirish Pargaonkar
4d79dba0e0 cifs: Add idmap key and related data structures and functions (try #17 repost)
Define (global) data structures to store ids, uids and gids, to which a
SID maps.  There are two separate trees, one for SID/uid and another one
for SID/gid.

A new type of key, cifs_idmap_key_type, is used.

Keys are instantiated and searched using credential of the root by
overriding and restoring the credentials of the caller requesting the key.

Id mapping functions are invoked under config option of cifs acl.

Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-05-19 14:10:51 +00:00