[ Upstream commit f777d88278 ]
Some use cases require the user to be informed if BIG synchronization
fails. This commit makes it so that even if the BIG sync established
event arrives with error status, a new hconn is added for each BIS,
and the iso layer is notified about the failed connections.
Unsuccesful bis connections will be marked using the
HCI_CONN_BIG_SYNC_FAILED flag. From the iso layer, the POLLERR event
is triggered on the newly allocated bis sockets, before adding them
to the accept list of the parent socket.
From user space, a new fd for each failed bis connection will be
obtained by calling accept. The user should check for the POLLERR
event on the new socket, to determine if the connection was successful
or not.
The HCI_CONN_BIG_SYNC flag has been added to mark whether the BIG sync
has been successfully established. This flag is checked at bis cleanup,
so the HCI LE BIG Terminate Sync command is only issued if needed.
The BT_SK_BIG_SYNC flag indicates if BIG create sync has been called
for a listening socket, to avoid issuing the command everytime a BIGInfo
advertising report is received.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of: 94d9ba9f98 ("Bluetooth: hci_sync: Fix UAF in hci_disconnect_all_sync")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a13f316e90 ]
This consolidates code for aborting connections using
hci_cmd_sync_queue so it is synchronized with other threads, but
because of the fact that some commands may block the cmd_sync_queue
while waiting specific events this attempt to cancel those requests by
using hci_cmd_sync_cancel.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of: 94d9ba9f98 ("Bluetooth: hci_sync: Fix UAF in hci_disconnect_all_sync")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 35a7a1ce7c ]
In 'mwifiex_handle_uap_rx_forward()', always check the value
returned by 'skb_copy()' to avoid potential NULL pointer
dereference in 'mwifiex_uap_queue_bridged_pkt()', and drop
original skb in case of copying failure.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 838e4f4492 ("mwifiex: improve uAP RX handling")
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230814095041.16416-1-dmantipov@yandex.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6785b2edf4 ]
The commit being fixed introduced a hunk into check_func_arg_reg_off
that bypasses reg->off == 0 enforcement when offset points to a graph
node or root. This might possibly be done for treating bpf_rbtree_remove
and others as KF_RELEASE and then later check correct reg->off in helper
argument checks.
But this is not the case, those helpers are already not KF_RELEASE and
permit non-zero reg->off and verify it later to match the subobject in
BTF type.
However, this logic leads to bpf_obj_drop permitting free of register
arguments with non-zero offset when they point to a graph root or node
within them, which is not ok.
For instance:
struct foo {
int i;
int j;
struct bpf_rb_node node;
};
struct foo *f = bpf_obj_new(typeof(*f));
if (!f) ...
bpf_obj_drop(f); // OK
bpf_obj_drop(&f->i); // still ok from verifier PoV
bpf_obj_drop(&f->node); // Not OK, but permitted right now
Fix this by dropping the whole part of code altogether.
Fixes: 6a3cd3318f ("bpf: Migrate release_on_unlock logic to non-owning ref semantics")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230822175140.1317749-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a7a2ef0c4b ]
While looking at a bug, I got rather confused by the layout of the
'status' field in ieee80211_tx_info. Apparently, the intention is that
status_driver_data[] is used for driver specific data, and fills up the
size of the union to 40 bytes, just like the other ones.
This is indeed what actually happens, but only because of the
combination of two mistakes:
- "void *status_driver_data[18 / sizeof(void *)];" is intended
to be 18 bytes long but is actually two bytes shorter because of
rounding-down in the division, to a multiple of the pointer
size (4 bytes or 8 bytes).
- The other fields combined are intended to be 22 bytes long, but
are actually 24 bytes because of padding in front of the
unaligned tx_time member, and in front of the pointer array.
The two mistakes cancel out. so the size ends up fine, but it seems
more helpful to make this explicit, by having a multiple of 8 bytes
in the size calculation and explicitly describing the padding.
Fixes: ea5907db2a ("mac80211: fix struct ieee80211_tx_info size")
Fixes: 02219b3abc ("mac80211: add WMM admission control support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230623152443.2296825-2-arnd@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 218d690c49 ]
The previous commit dd3e4fc75b ("nl80211/cfg80211: add BSS color to
NDP ranging parameters") adds a parameter for NDP ranging by introducing
a new attribute type named NL80211_PMSR_FTM_REQ_ATTR_BSS_COLOR.
However, the author forgot to also describe the nla_policy at
nl80211_pmsr_ftm_req_attr_policy (net/wireless/nl80211.c). Just
complement it to avoid malformed attribute that causes out-of-attribute
access.
Fixes: dd3e4fc75b ("nl80211/cfg80211: add BSS color to NDP ranging parameters")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230809033151.768910-1-linma@zju.edu.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 927521170c ]
Code inspection reveals that we switch the puncturing bitmap
before the real channel switch, since that happens only in
the second round of the worker after the channel context is
switched by ieee80211_link_use_reserved_context().
Fixes: 2cc25e4b2a ("wifi: mac80211: configure puncturing bitmap")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab6c637ad0 ]
When reviewing local percpu kptr support, Alexei discovered a bug
wherea bpf_kptr_xchg() may succeed even if the map value kptr type and
locally allocated obj type do not match ([1]). Missed struct btf_id
comparison is the reason for the bug. This patch added such struct btf_id
comparison and will flag verification failure if types do not match.
[1] https://lore.kernel.org/bpf/20230819002907.io3iphmnuk43xblu@macbook-pro-8.dhcp.thefacebook.com/#t
Reported-by: Alexei Starovoitov <ast@kernel.org>
Fixes: 738c96d5e2 ("bpf: Allow local kptrs to be exchanged via bpf_kptr_xchg")
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230822050053.2886960-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 454994cfa9 ]
If ath9k_wmi_cmd() has exited with a timeout, it is possible that during
next ath9k_wmi_cmd() call the wmi_rsp callback for previous wmi command
writes to new wmi->cmd_rsp_buf and makes a completion. This results in an
invalid ath9k_wmi_cmd() return value.
Move the replacement of WMI command response buffer and length under
wmi_lock. Note that last_seq_id value is updated there, too.
Thus, the buffer cannot be written to by a belated wmi_rsp callback
because that path is properly rejected by the last_seq_id check.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: fb9987d0f7 ("ath9k_htc: Support for AR9271 chipset.")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230425192607.18015-2-pchelkin@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b674fb513e ]
Currently, the synchronization between ath9k_wmi_cmd() and
ath9k_wmi_ctrl_rx() is exposed to a race condition which, although being
rather unlikely, can lead to invalid behaviour of ath9k_wmi_cmd().
Consider the following scenario:
CPU0 CPU1
ath9k_wmi_cmd(...)
mutex_lock(&wmi->op_mutex)
ath9k_wmi_cmd_issue(...)
wait_for_completion_timeout(...)
---
timeout
---
/* the callback is being processed
* before last_seq_id became zero
*/
ath9k_wmi_ctrl_rx(...)
spin_lock_irqsave(...)
/* wmi->last_seq_id check here
* doesn't detect timeout yet
*/
spin_unlock_irqrestore(...)
/* last_seq_id is zeroed to
* indicate there was a timeout
*/
wmi->last_seq_id = 0
mutex_unlock(&wmi->op_mutex)
return -ETIMEDOUT
ath9k_wmi_cmd(...)
mutex_lock(&wmi->op_mutex)
/* the buffer is replaced with
* another one
*/
wmi->cmd_rsp_buf = rsp_buf
wmi->cmd_rsp_len = rsp_len
ath9k_wmi_cmd_issue(...)
spin_lock_irqsave(...)
spin_unlock_irqrestore(...)
wait_for_completion_timeout(...)
/* the continuation of the
* callback left after the first
* ath9k_wmi_cmd call
*/
ath9k_wmi_rsp_callback(...)
/* copying data designated
* to already timeouted
* WMI command into an
* inappropriate wmi_cmd_buf
*/
memcpy(...)
complete(&wmi->cmd_wait)
/* awakened by the bogus callback
* => invalid return result
*/
mutex_unlock(&wmi->op_mutex)
return 0
To fix this, update last_seq_id on timeout path inside ath9k_wmi_cmd()
under the wmi_lock. Move ath9k_wmi_rsp_callback() under wmi_lock inside
ath9k_wmi_ctrl_rx() so that the wmi->cmd_wait can be completed only for
initially designated wmi_cmd call, otherwise the path would be rejected
with last_seq_id check.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: fb9987d0f7 ("ath9k_htc: Support for AR9271 chipset.")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230425192607.18015-1-pchelkin@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d93a7cf6ca ]
In the commit 7c4cd051ad ("bpf: Fix syscall's stackmap lookup
potential deadlock"), a potential deadlock issue was addressed, which
resulted in *_map_lookup_elem not triggering BPF programs.
(prior to lookup, bpf_disable_instrumentation() is used)
To resolve the broken map lookup probe using "htab_map_lookup_elem",
this commit introduces an alternative approach. Instead, it utilize
"bpf_map_copy_value" and apply a filter specifically for the hash table
with map_type.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Fixes: 7c4cd051ad ("bpf: Fix syscall's stackmap lookup potential deadlock")
Link: https://lore.kernel.org/r/20230818090119.477441-8-danieltimlee@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 92632115fb ]
Recently, a new tracepoint for the block layer, specifically the
block_io_start/done tracepoints, was introduced in commit 5a80bd075f
("block: introduce block_io_start/block_io_done tracepoints").
Previously, the kprobe entry used for this purpose was quite unstable
and inherently broke relevant probes [1]. Now that a stable tracepoint
is available, this commit replaces the bio latency check with it.
One of the changes made during this replacement is the key used for the
hash table. Since 'struct request' cannot be used as a hash key, the
approach taken follows that which was implemented in bcc/biolatency [2].
(uses dev:sector for the key)
[1]: https://github.com/iovisor/bcc/issues/4261
[2]: https://github.com/iovisor/bcc/pull/4691
Fixes: 450b7879e3 ("block: move blk_account_io_{start,done} to blk-mq.c")
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Link: https://lore.kernel.org/r/20230818090119.477441-7-danieltimlee@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 86684c2481 ]
Comparing .dts files to built .dtb files yielded a few .dts files which
are never built. Add them to the build.
Signed-off-by: Rob Herring <robh@kernel.org>
Stable-dep-of: 92632115fb ("samples/bpf: fix bio latency check with tracepoint")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 99f34659e7 ]
Patch series "memfd: cleanups for vm.memfd_noexec", v2.
The most critical issue with vm.memfd_noexec=2 (the fact that passing
MFD_EXEC would bypass it entirely[1]) has been fixed in Andrew's
tree[2], but there are still some outstanding issues that need to be
addressed:
* vm.memfd_noexec=2 shouldn't reject old-style memfd_create(2) syscalls
because it will make it far to difficult to ever migrate. Instead it
should imply MFD_EXEC.
* The dmesg warnings are pr_warn_once(), which on most systems means
that they will be used up by systemd or some other boot process and
userspace developers will never see it.
- For the !(flags & (MFD_EXEC | MFD_NOEXEC_SEAL)) case, outputting a
rate-limited message to the kernel log is necessary to tell
userspace that they should add the new flags.
Arguably the most ideal way to deal with the spam concern[3,4]
while still prompting userspace to switch to the new flags would be
to only log the warning once per task or something similar.
However, adding something to task_struct for tracking this would be
needless bloat for a single pr_warn_ratelimited().
So just switch to pr_info_ratelimited() to avoid spamming the log
with something that isn't a real warning. There's lots of
info-level stuff in dmesg, it seems really unlikely that this
should be an actual problem. Most programs are already switching to
the new flags anyway.
- For the vm.memfd_noexec=2 case, we need to log a warning for every
failure because otherwise userspace will have no idea why their
previously working program started returning -EACCES (previously
-EINVAL) from memfd_create(2). pr_warn_once() is simply wrong here.
* The racheting mechanism for vm.memfd_noexec makes it incredibly
unappealing for most users to enable the sysctl because enabling it
on &init_pid_ns means you need a system reboot to unset it. Given the
actual security threat being protected against, CAP_SYS_ADMIN users
being restricted in this way makes little sense.
The argument for this ratcheting by the original author was that it
allows you to have a hierarchical setting that cannot be unset by
child pidnses, but this is not accurate -- changing the parent
pidns's vm.memfd_noexec setting to be more restrictive didn't affect
children.
Instead, switch the vm.memfd_noexec sysctl to be properly
hierarchical and allow CAP_SYS_ADMIN users (in the pidns's owning
userns) to lower the setting as long as it is not lower than the
parent's effective setting. This change also makes it so that
changing a parent pidns's vm.memfd_noexec will affect all
descendants, providing a properly hierarchical setting. The
performance impact of this is incredibly minimal since the maximum
depth of pidns is 32 and it is only checked during memfd_create(2)
and unshare(CLONE_NEWPID).
* The memfd selftests would not exit with a non-zero error code when
certain tests that ran in a forked process (specifically the ones
related to MFD_EXEC and MFD_NOEXEC_SEAL) failed.
[1]: https://lore.kernel.org/all/ZJwcsU0vI-nzgOB_@codewreck.org/
[2]: https://lore.kernel.org/all/20230705063315.3680666-1-jeffxu@google.com/
[3]: https://lore.kernel.org/Y5yS8wCnuYGLHMj4@x1n/
[4]: https://lore.kernel.org/f185bb42-b29c-977e-312e-3349eea15383@linuxfoundation.org/
This patch (of 5):
Before this change, a test runner using this self test would see a return
code of 0 when the tests using a child process (namely the MFD_NOEXEC_SEAL
and MFD_EXEC tests) failed, masking test failures.
Link: https://lkml.kernel.org/r/20230814-memfd-vm-noexec-uapi-fixes-v2-0-7ff9e3e10ba6@cyphar.com
Link: https://lkml.kernel.org/r/20230814-memfd-vm-noexec-uapi-fixes-v2-1-7ff9e3e10ba6@cyphar.com
Fixes: 11f75a0144 ("selftests/memfd: add tests for MFD_NOEXEC_SEAL MFD_EXEC")
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Reviewed-by: Jeff Xu <jeffxu@google.com>
Cc: "Christian Brauner (Microsoft)" <brauner@kernel.org>
Cc: Daniel Verkamp <dverkamp@chromium.org>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b3bfc4fb1e ]
A few samples get bad performance on 2GHz band, so use proper IQK command
code and select another group to have wider range of calibration value.
Fixes: f2abe804e8 ("wifi: rtw89: 8852b: rfk: add IQK")
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230803110150.8457-1-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc1fb82ae1 ]
sk_getsockopt() runs locklessly. This means sk->sk_lingertime
can be read while other threads are changing its value.
Other reads also happen without socket lock being held,
and must be annotated.
Remove preprocessor logic using BITS_PER_LONG, compilers
are smart enough to figure this by themselves.
v2: fixed a clang W=1 (-Wtautological-constant-out-of-range-compare) warning
(Jakub)
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab104318f6 ]
As Simon Horman suggests, update vcap_get_rule() to always
return an ERR_PTR() and update the error detection conditions to
use IS_ERR(), so use IS_ERR() to fix the return value issue.
Fixes: 72df3489fb ("net: lan966x: Add ptp trap rules")
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Suggested-by: Simon Horman <horms@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b72e5f9e7 ]
Process result of ocfs2_add_entry() in case we have an error
value.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Link: https://lkml.kernel.org/r/20230803145417.177649-1-artem.chernyshev@red-soft.ru
Fixes: ccd979bdbc ("[PATCH] OCFS2: The Second Oracle Cluster Filesystem")
Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Artem Chernyshev <artem.chernyshev@red-soft.ru>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Kurt Hackel <kurt.hackel@oracle.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fb40b05373 ]
'lsmod' shows total core layout size, so we need to sum up all the
sections in core layout in gdb scripts.
/ # lsmod
kasan_test 200704 0 - Live 0xffff80007f640000
Before patch:
(gdb) lx-lsmod
Address Module Size Used by
0xffff80007f640000 kasan_test 36864 0
After patch:
(gdb) lx-lsmod
Address Module Size Used by
0xffff80007f640000 kasan_test 200704 0
Link: https://lkml.kernel.org/r/20230710092852.31049-1-Kuan-Ying.Lee@mediatek.com
Fixes: b4aff7513d ("scripts/gdb: use mem instead of core_layout to get the module address")
Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Reviewed-by: Pankaj Raghav <p.raghav@samsung.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Qun-Wei Lin <qun-wei.lin@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a171fbec88 ]
LWTUNNEL_XMIT_CONTINUE is implicitly assumed in ip(6)_finish_output2,
such that any positive return value from a xmit hook could cause
unexpected continue behavior, despite that related skb may have been
freed. This could be error-prone for future xmit hook ops. One of the
possible errors is to return statuses of dst_output directly.
To make the code safer, redefine LWTUNNEL_XMIT_CONTINUE value to
distinguish from dst_output statuses and check the continue
condition explicitly.
Fixes: 3a0af8fd61 ("bpf: BPF for lightweight tunnel infrastructure")
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/96b939b85eda00e8df4f7c080f770970a4c5f698.1692326837.git.yan@cloudflare.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 29b22badb7 ]
BPF encap ops can return different types of positive values, such like
NET_RX_DROP, NET_XMIT_CN, NETDEV_TX_BUSY, and so on, from function
skb_do_redirect and bpf_lwt_xmit_reroute. At the xmit hook, such return
values would be treated implicitly as LWTUNNEL_XMIT_CONTINUE in
ip(6)_finish_output2. When this happens, skbs that have been freed would
continue to the neighbor subsystem, causing use-after-free bug and
kernel crashes.
To fix the incorrect behavior, skb_do_redirect return values can be
simply discarded, the same as tc-egress behavior. On the other hand,
bpf_lwt_xmit_reroute returns useful errors to local senders, e.g. PMTU
information. Thus convert its return values to avoid the conflict with
LWTUNNEL_XMIT_CONTINUE.
Fixes: 3a0af8fd61 ("bpf: BPF for lightweight tunnel infrastructure")
Reported-by: Jordan Griege <jgriege@cloudflare.com>
Suggested-by: Martin KaFai Lau <martin.lau@linux.dev>
Suggested-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/0d2b878186cfe215fec6b45769c1cd0591d3628d.1692326837.git.yan@cloudflare.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8e03dd62e5 ]
Chips such as BCM7278 support system wide suspend/resume which will
cause the HWRNG block to lose its state and reset to its power on reset
register values. We need to cleanup and re-initialize the HWRNG for it
to be functional coming out of a system suspend cycle.
Fixes: c3577f6100 ("hwrng: iproc-rng200 - Add support for BCM7278")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e1e8a142c4 ]
Allow task's event buffer to be filled also in the case that it's size
is exactly the size of the message.
Fixes: d69ea414c9 ("ice: implement device flash update via devlink")
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac8a529621 ]
Now there are two indicators of socket memory pressure sit inside
struct mem_cgroup, socket_pressure and tcpmem_pressure, indicating
memory reclaim pressure in memcg->memory and ->tcpmem respectively.
When in legacy mode (cgroupv1), the socket memory is charged into
->tcpmem which is independent of ->memory, so socket_pressure has
nothing to do with socket's pressure at all. Things could be worse
by taking socket_pressure into consideration in legacy mode, as a
pressure in ->memory can lead to premature reclamation/throttling
in socket.
While for the default mode (cgroupv2), the socket memory is charged
into ->memory, and ->tcpmem/->tcpmem_pressure are simply not used.
So {socket,tcpmem}_pressure are only used in default/legacy mode
respectively for indicating socket memory pressure. This patch fixes
the pieces of code that make mixed use of both.
Fixes: 8e8ae64524 ("mm: memcontrol: hook up vmpressure to socket pressure")
Signed-off-by: Abel Wu <wuyun.abel@bytedance.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 36122201ee ]
In the original RPU query command, the status register values of
multiple RPU tunnels are accumulated by default, which is unreasonable.
This patch Fix it by querying the specified tunnel ID.
The tunnel number of the device can be obtained from firmware
during initialization.
Fixes: ddb54554fa ("net: hns3: add DFX registers information for ethtool -d")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d8634b7c3f ]
The dump register function is being refactored.
The second step in refactoring is to support tlv info in regs data for
HNS3 PF driver.
Currently, if we use "ethtool -d" to dump regs value,
the output is as follows:
offset1: 00 01 02 03 04 05 ...
offset2：10 11 12 13 14 15 ...
......
We can't get the value of a register directly.
This patch deletes the original separator information and
add tag_len_value information in regs data.
ethtool can parse register data in key-value format by -d command.
a patch will be added to the ethtool to parse regs data
in the following format:
reg1 : value2
reg2 : value2
......
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 36122201ee ("net: hns3: fix wrong rpu tln reg issue")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 939ccd107f ]
The dump register function is being refactored.
The first step in refactoring is put the dump regs function
into a separate file.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 36122201ee ("net: hns3: fix wrong rpu tln reg issue")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 83a89c4b6a ]
Running the bench_rename test script, the following error occurs:
# ./benchs/run_bench_rename.sh
base : 0.819 ± 0.012M/s
kprobe : 0.538 ± 0.009M/s
kretprobe : 0.503 ± 0.004M/s
rawtp : 0.779 ± 0.020M/s
fentry : 0.726 ± 0.007M/s
fexit : 0.691 ± 0.007M/s
benchmark 'rename-fmodret' not found
The bench_rename_fmodret has been removed in commit b000def2e0
("selftests: Remove fmod_ret from test_overhead"), thus remove it
from the runners in the test script.
Fixes: b000def2e0 ("selftests: Remove fmod_ret from test_overhead")
Signed-off-by: Yipeng Zou <zouyipeng@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230814030727.3010390-1-zouyipeng@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 811915db67 ]
There is no way where topts.repeat can be set to 1 when tc_test fails.
Fix the typo where the break statement slipped by one line.
Fixes: fb66223a24 ("selftests/bpf: add test for accessing ctx from syscall program type")
Signed-off-by: Yipeng Zou <zouyipeng@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Li Zetao <lizetao1@huawei.com>
Link: https://lore.kernel.org/bpf/20230814031434.3077944-1-zouyipeng@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e89688e3e9 ]
In tcp_retransmit_timer(), a window shrunk connection will be regarded
as timeout if 'tcp_jiffies32 - tp->rcv_tstamp > TCP_RTO_MAX'. This is not
right all the time.
The retransmits will become zero-window probes in tcp_retransmit_timer()
if the 'snd_wnd==0'. Therefore, the icsk->icsk_rto will come up to
TCP_RTO_MAX sooner or later.
However, the timer can be delayed and be triggered after 122877ms, not
TCP_RTO_MAX, as I tested.
Therefore, 'tcp_jiffies32 - tp->rcv_tstamp > TCP_RTO_MAX' is always true
once the RTO come up to TCP_RTO_MAX, and the socket will die.
Fix this by replacing the 'tcp_jiffies32' with '(u32)icsk->icsk_timeout',
which is exact the timestamp of the timeout.
However, "tp->rcv_tstamp" can restart from idle, then tp->rcv_tstamp
could already be a long time (minutes or hours) in the past even on the
first RTO. So we double check the timeout with the duration of the
retransmission.
Meanwhile, making "2 * TCP_RTO_MAX" as the timeout to avoid the socket
dying too soon.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Link: https://lore.kernel.org/netdev/CADxym3YyMiO+zMD4zj03YPM3FBi-1LHi6gSD2XT8pyAMM096pg@mail.gmail.com/
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 66dee21524 ]
When user tries to connect a new CIS when its CIG is not configurable,
that connection shall fail, but pre-existing connections shall not be
affected. However, currently hci_cc_le_set_cig_params deletes all CIS
of the CIG on error so it doesn't work, even though controller shall not
change CIG/CIS configuration if the command fails.
Fix by failing on command error only the connections that are not yet
bound, so that we keep the previous CIS configuration like the
controller does.
Fixes: 26afbd826e ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f78191cc9 ]
This attempts to always allocate a unique handle for connections so they
can be properly aborted by the likes of hci_abort_conn, so this uses the
invalid range as a pool of unset handles that way if userspace is trying
to create multiple connections at once each will be given a unique
handle which will be considered unset.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of: 66dee21524 ("Bluetooth: hci_event: drop only unbound CIS if Set CIG Parameters fails")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a2bcd2b632 ]
KSAN reports use-after-free in hci_add_adv_monitor().
While adding an adv monitor,
hci_add_adv_monitor() calls ->
msft_add_monitor_pattern() calls ->
msft_add_monitor_sync() calls ->
msft_le_monitor_advertisement_cb() calls in an error case ->
hci_free_adv_monitor() which frees the *moniter.
This is referenced by bt_dev_dbg() in hci_add_adv_monitor().
Fix the bt_dev_dbg() by using handle instead of monitor->handle.
Fixes: b747a83690 ("Bluetooth: hci_sync: Refactor add Adv Monitor")
Signed-off-by: Manish Mandlik <mmandlik@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6f55eea116 ]
The hci_add_adv_monitor() hci_remove_adv_monitor() functions call
bt_dev_dbg() to print some debug statements. The bt_dev_dbg() macro
automatically adds in the device's name. That means that we shouldn't
include the name in the bt_dev_dbg() calls.
Suggested-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of: a2bcd2b632 ("Bluetooth: hci_sync: Avoid use-after-free in dbg for hci_add_adv_monitor()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3673952cf0 ]
Similar to commit c5d2b6fa26 ("Bluetooth: Fix use-after-free in
hci_remove_ltk/hci_remove_irk"). We can not access k after kfree_rcu()
call.
Fixes: d7d41682ef ("Bluetooth: Fix Suspicious RCU usage warnings")
Signed-off-by: Min Li <lm0963hack@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a091289218 ]
When running with concurrent task only one CIS was being assigned so
this attempts to rework the way the PDU is constructed so it is handled
later at the callback instead of in place.
Fixes: 26afbd826e ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f2f84a70f9 ]
Only the number of CIS shall be limited to 0x1f, the CIS ID in the
other hand is up to 0xef.
Fixes: 26afbd826e ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b7f923b1ef ]
Valid range of CIG/CIS are 0x00 to 0xEF, so this checks they are
properly checked before attempting to use HCI_OP_LE_SET_CIG_PARAMS.
Fixes: ccf74f2390 ("Bluetooth: Add BTPROTO_ISO socket type")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8b5aed313 ]
in nokia_bluetooth_serdev_probe(), check the return value of
clk_prepare_enable() and return the error code if
clk_prepare_enable() returns an unexpected value.
Fixes: 7bb318680e ("Bluetooth: add nokia driver")
Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f74563e61 ]
LE Create CIS command shall not be sent before all CIS Established
events from its previous invocation have been processed. Currently it is
sent via hci_sync but that only waits for the first event, but there can
be multiple.
Make it wait for all events, and simplify the CIS creation as follows:
Add new flag HCI_CONN_CREATE_CIS, which is set if Create CIS has been
sent for the connection but it is not yet completed.
Make BT_CONNECT state to mean the connection wants Create CIS.
On events after which new Create CIS may need to be sent, send it if
possible and some connections need it. These events are:
hci_connect_cis, iso_connect_cfm, hci_cs_le_create_cis,
hci_le_cis_estabilished_evt.
The Create CIS status/completion events shall queue new Create CIS only
if at least one of the connections transitions away from BT_CONNECT, so
that we don't loop if controller is sending bogus events.
This fixes sending multiple CIS Create for the same CIS in the
"ISO AC 6(i) - Success" BlueZ test case:
< HCI Command: LE Create Co.. (0x08|0x0064) plen 9 #129 [hci0]
Number of CIS: 2
CIS Handle: 257
ACL Handle: 42
CIS Handle: 258
ACL Handle: 42
> HCI Event: Command Status (0x0f) plen 4 #130 [hci0]
LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1
Status: Success (0x00)
> HCI Event: LE Meta Event (0x3e) plen 29 #131 [hci0]
LE Connected Isochronous Stream Established (0x19)
Status: Success (0x00)
Connection Handle: 257
...
< HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 #132 [hci0]
...
> HCI Event: Command Complete (0x0e) plen 6 #133 [hci0]
LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1
...
< HCI Command: LE Create Co.. (0x08|0x0064) plen 5 #134 [hci0]
Number of CIS: 1
CIS Handle: 258
ACL Handle: 42
> HCI Event: Command Status (0x0f) plen 4 #135 [hci0]
LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1
Status: ACL Connection Already Exists (0x0b)
> HCI Event: LE Meta Event (0x3e) plen 29 #136 [hci0]
LE Connected Isochronous Stream Established (0x19)
Status: Success (0x00)
Connection Handle: 258
...
Fixes: c09b80be6f ("Bluetooth: hci_conn: Fix not waiting for HCI_EVT_LE_CIS_ESTABLISHED")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a0bfde167b ]
It is required for some configurations to have multiple BISes as part
of the same BIG.
Similar to the flow implemented for unicast, DEFER_SETUP will also be
used to bind multiple BISes for the same BIG, before starting Periodic
Advertising and creating the BIG.
The user will have to open a new socket for each BIS. By setting the
BT_DEFER_SETUP socket option and calling connect, a new connection
will be added for the BIG and advertising handle set by the socket
QoS parameters. Since all BISes will be bound for the same BIG and
advertising handle, the socket QoS options and base parameters should
match for all connections.
By calling connect on a socket that does not have the BT_DEFER_SETUP
option set, periodic advertising will be started and the BIG will
be created, with a BIS for each previously bound connection. Since
a BIG cannot be reconfigured with additional BISes after creation,
no more connections can be bound for the BIG after the start periodic
advertising and create BIG commands have been queued.
The bis_cleanup function has also been updated, so that the advertising
set and the BIG will not be terminated unless there are no more
bound or connected BISes.
The HCI_CONN_BIG_CREATED connection flag has been added to indicate
that the BIG has been successfully created. This flag is checked at
bis_cleanup, so that the BIG is only terminated if the
HCI_LE_Create_BIG_Complete has been received.
This implementation has been tested on hardware, using the "isotest"
tool with an additional command line option, to specify the number of
BISes to create as part of the desired BIG:
tools/isotest -i hci0 -s 00:00:00:00:00:00 -N 2 -G 1 -T 1
The btmon log shows that a BIG containing 2 BISes has been created:
< HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) plen 31
Handle: 0x01
Advertising Handle: 0x01
Number of BIS: 2
SDU Interval: 10000 us (0x002710)
Maximum SDU size: 40
Maximum Latency: 10 ms (0x000a)
RTN: 0x02
PHY: LE 2M (0x02)
Packing: Sequential (0x00)
Framing: Unframed (0x00)
Encryption: 0x00
Broadcast Code: 00000000000000000000000000000000
> HCI Event: Command Status (0x0f) plen 4
LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1
Status: Success (0x00)
> HCI Event: LE Meta Event (0x3e) plen 23
LE Broadcast Isochronous Group Complete (0x1b)
Status: Success (0x00)
Handle: 0x01
BIG Synchronization Delay: 1974 us (0x0007b6)
Transport Latency: 1974 us (0x0007b6)
PHY: LE 2M (0x02)
NSE: 3
BN: 1
PTO: 1
IRC: 3
Maximum PDU: 40
ISO Interval: 10.00 msec (0x0008)
Connection Handle #0: 10
Connection Handle #1: 11
< HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13
Handle: 10
Data Path Direction: Input (Host to Controller) (0x00)
Data Path: HCI (0x00)
Coding Format: Transparent (0x03)
Company Codec ID: Ericsson Technology Licensing (0)
Vendor Codec ID: 0
Controller Delay: 0 us (0x000000)
Codec Configuration Length: 0
Codec Configuration:
> HCI Event: Command Complete (0x0e) plen 6
LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1
Status: Success (0x00)
Handle: 10
< HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13
Handle: 11
Data Path Direction: Input (Host to Controller) (0x00)
Data Path: HCI (0x00)
Coding Format: Transparent (0x03)
Company Codec ID: Ericsson Technology Licensing (0)
Vendor Codec ID: 0
Controller Delay: 0 us (0x000000)
Codec Configuration Length: 0
Codec Configuration:
> HCI Event: Command Complete (0x0e) plen 6
LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1
Status: Success (0x00)
Handle: 11
< ISO Data TX: Handle 10 flags 0x02 dlen 44
< ISO Data TX: Handle 11 flags 0x02 dlen 44
> HCI Event: Number of Completed Packets (0x13) plen 5
Num handles: 1
Handle: 10
Count: 1
> HCI Event: Number of Completed Packets (0x13) plen 5
Num handles: 1
Handle: 11
Count: 1
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of: 7f74563e61 ("Bluetooth: ISO: do not emit new LE Create CIS if previous is pending")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2be22f1941 ]
The ISO Interval on CIS Established Event uses 1.25 ms slots:
BLUETOOTH CORE SPECIFICATION Version 5.3 | Vol 4, Part E
page 2304:
Time = N * 1.25 ms
In addition to that this always update the QoS settings based on CIS
Established Event.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 7f74563e61 ("Bluetooth: ISO: do not emit new LE Create CIS if previous is pending")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ae4577bc0 ]
The function crypto_drop_spawn expects to be called in process
context. However, when an instance is unregistered while it still
has active users, the last user may cause the instance to be freed
in atomic context.
Fix this by delaying the freeing to a work queue.
Fixes: 6bfd48096f ("[CRYPTO] api: Added spawns")
Reported-by: Florent Revest <revest@chromium.org>
Reported-by: syzbot+d769eed29cc42d75e2a3@syzkaller.appspotmail.com
Reported-by: syzbot+610ec0671f51e838436e@syzkaller.appspotmail.com
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Florent Revest <revest@chromium.org>
Acked-by: Florent Revest <revest@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aec4880516 ]
If pm_runtime_get() (disguised as pm_runtime_resume_and_get()) fails, this
means the clk wasn't prepared and enabled. Returning early in this case
however is wrong as then the following resource frees are skipped and this
is never catched up. So do all the cleanups but clk_disable_unprepare().
Also don't emit a warning, as stm32_hash_runtime_resume() already emitted
one.
Note that the return value of stm32_hash_remove() is mostly ignored by
the device core. The only effect of returning zero instead of an error
value is to suppress another warning in platform_remove(). So return 0
even if pm_runtime_resume_and_get() failed.
Fixes: 8b4d566de6 ("crypto: stm32/hash - Add power management support")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9eb7e20e0c ]
`bindgen`'s output for `libclang`'s version check contains paths, which
in turn may contain strings that look like version numbers [1][2]:
.../6.1.0-dev/.../rust_is_available_bindgen_libclang.h:2:9: warning: clang version 11.1.0 [-W#pragma-messages], err: false
which the script will pick up as the version instead of the latter.
It is also the case that versions may appear after the actual version
(e.g. distribution's version text), which was the reason behind `head` [3]:
.../rust-is-available-bindgen-libclang.h:2:9: warning: clang version 13.0.0 (Fedora 13.0.0-3.fc35) [-W#pragma-messages], err: false
Thus instead ask for a match after the `clang version` string.
Reported-by: Jordan Isaacs <mail@jdisaacs.com>
Closes: https://github.com/Rust-for-Linux/linux/issues/942 [1]
Reported-by: "Ethan D. Twardy" <ethan.twardy@gmail.com>
Closes: https://lore.kernel.org/rust-for-linux/20230528131802.6390-2-ethan.twardy@gmail.com/ [2]
Reported-by: Tiago Lam <tiagolam@gmail.com>
Closes: https://github.com/Rust-for-Linux/linux/pull/789 [3]
Fixes: 78521f3399 ("scripts: add `rust_is_available.sh`")
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Ethan Twardy <ethan.twardy@gmail.com>
Tested-by: Ethan Twardy <ethan.twardy@gmail.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230616001631.463536-8-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 52cae7f28e ]
`scripts/rust_is_available.sh` calls `bindgen` with a special
header in order to check whether the `libclang` version in use
is suitable.
However, the invocation itself may fail if, for instance, `bindgen`
cannot locate `libclang`. This is fine for Kconfig (since the
script will still fail and therefore disable Rust as it should),
but it is pretty confusing for users of the `rustavailable` target
given the error will be unrelated:
./scripts/rust_is_available.sh: 21: arithmetic expression: expecting primary: "100000 * + 100 * + "
make: *** [Makefile:1816: rustavailable] Error 2
Instead, run the `bindgen` invocation independently in a previous
step, saving its output and return code. If it fails, then show
the user a proper error message. Otherwise, continue as usual
with the saved output.
Since the previous patch we show a reference to the docs, and
the docs now explain how `bindgen` looks for `libclang`,
thus the error message can leverage the documentation, avoiding
duplication here (and making users aware of the setup guide in
the documentation).
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/rust-for-linux/CAKwvOdm5JT4wbdQQYuW+RT07rCi6whGBM2iUAyg8A1CmLXG6Nw@mail.gmail.com/
Reported-by: François Valenduc <francoisvalenduc@gmail.com>
Closes: https://github.com/Rust-for-Linux/linux/issues/934
Reported-by: Alexandru Radovici <msg4alex@gmail.com>
Closes: https://github.com/Rust-for-Linux/linux/pull/921
Reported-by: Matthew Leach <dev@mattleach.net>
Closes: https://lore.kernel.org/rust-for-linux/20230507084116.1099067-1-dev@mattleach.net/
Fixes: 78521f3399 ("scripts: add `rust_is_available.sh`")
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230616001631.463536-6-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
