Commit graph

112,392 commits

Author SHA1 Message Date
Jakub Kicinski
d75b4c7dee Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2022-05-06

This series contains updates to ice driver only.

Ivan Vecera fixes a race with aux plug/unplug by delaying setting adev
until initialization is complete and adding locking.

Anatolii ensures VF queues are completely disabled before attempting to
reconfigure them.

Michal ensures stale Tx timestamps are cleared from hardware.

* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  ice: fix PTP stale Tx timestamps cleanup
  ice: clear stale Tx queue settings before configuring
  ice: Fix race during aux device (un)plugging
====================

Link: https://lore.kernel.org/r/20220506174129.4976-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-09 17:54:27 -07:00
Jakub Kicinski
5bcfeb6efe Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:

====================
100GbE Intel Wired LAN Driver Updates 2022-05-06

Marcin Szycik says:

This patchset adds support for systemd defined naming scheme for port
representors, as well as re-enables displaying PCI bus-info in ethtool.

bus-info information has previously been removed from ethtool for port
representors, as a workaround for a bug in lshw tool, where the tool would
sometimes display wrong descriptions for port representors/PF. Now the bug
has been fixed in lshw tool [1].

Removing the workaround can be considered a regression (user might be
running an older, unpatched version of lshw) (see [2] for discussion).
However, calling SET_NETDEV_DEV also produces the same effect as removing
the workaround, i.e. lshw is able to access PCI bus-info (this time not
via ethtool, but in some other way) and the bug can occur.

Adding SET_NETDEV_DEV is important, as it greatly improves netdev naming -
- port representors are named based on PF name. Currently port representors
are named "ethX", which might be confusing, especially when spawning VFs on
multiple PFs. Furthermore, it's currently harder to determine to which PF
does a particular port representor belong, as bus-info is not shown in
ethtool.

Consider the following three cases:

Case 1: current code - driver workaround in place, no SET_NETDEV_DEV,
lshw with or without fix. Port representors are not displayed because they
don't have bus-info (the workaround), PFs are labelled correctly:

$ sudo ./lshw -c net -businfo
Bus info          Device      Class          Description
========================================================
pci@0000:02:00.0  ens6f0      network        Ethernet Controller E810-XXV for SFP <-- PF
pci@0000:02:00.1  ens6f1      network        Ethernet Controller E810-XXV for SFP
pci@0000:02:01.0  ens6f0v0    network        Ethernet Adaptive Virtual Function <-- VF
pci@0000:02:01.1  ens6f0v1    network        Ethernet Adaptive Virtual Function
...

Case 2: driver workaround in place, SET_NETDEV_DEV, no lshw fix. Port
representors have predictable names. lshw is able to get bus-info because
of SET_NETDEV_DEV and netdevs CAN be mislabelled:

$ sudo ./lshw -c net -businfo
Bus info          Device           Class          Description
=============================================================
pci@0000:02:00.0  ens6f0npf0vf60   network        Ethernet Controller E810-XXV for SFP <-- mislabeled port representor
pci@0000:02:00.1  ens6f1           network        Ethernet Controller E810-XXV for SFP
pci@0000:02:01.0  ens6f0v0         network        Ethernet Adaptive Virtual Function
pci@0000:02:01.1  ens6f0v1         network        Ethernet Adaptive Virtual Function
...
pci@0000:02:00.0  ens6f0npf0vf26   network        Ethernet interface
pci@0000:02:00.0  ens6f0           network        Ethernet interface <-- mislabeled PF
pci@0000:02:00.0  ens6f0npf0vf81   network        Ethernet interface
...
$ sudo ethtool -i ens6f0npf0vf60
driver: ice
...
bus-info:
...

Output of lshw would be the same with workaround removed; it does not
change the fact that lshw labels netdevs incorrectly, while at the same
time it prevents ethtool from displaying potentially useful data
(bus-info).

Case 3: workaround removed, SET_NETDEV_DEV, lshw fix:

$ sudo ./lshw -c net -businfo
Bus info          Device           Class          Description
=============================================================
pci@0000:02:00.0  ens6f0npf0vf73   network        Ethernet Controller E810-XXV for SFP
pci@0000:02:00.1  ens6f1           network        Ethernet Controller E810-XXV for SFP
pci@0000:02:01.0  ens6f0v0         network        Ethernet Adaptive Virtual Function
pci@0000:02:01.1  ens6f0v1         network        Ethernet Adaptive Virtual Function
...
pci@0000:02:00.0  ens6f0npf0vf5    network        Ethernet Controller E810-XXV for SFP
pci@0000:02:00.0  ens6f0           network        Ethernet Controller E810-XXV for SFP
pci@0000:02:00.0  ens6f0npf0vf60   network        Ethernet Controller E810-XXV for SFP
...
$ sudo ethtool -i ens6f0npf0vf73
driver: ice
...
bus-info: 0000:02:00.0
...

In this case poort representors have predictable names, netdevs are not
mislabelled in lshw, and bus-info is shown in ethtool.

[1] 9bf4e4c9c1
[2] https://patchwork.ozlabs.org/project/intel-wired-lan/patch/20220321144731.3935-1-marcin.szycik@linux.intel.com

* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
  Revert "ice: Hide bus-info in ethtool for PRs in switchdev mode"
  ice: link representors to PCI device
====================

Link: https://lore.kernel.org/r/20220506180052.5256-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-09 17:51:01 -07:00
Francesco Dolcini
91a7cda1f4 net: phy: Fix race condition on link status change
This fixes the following error caused by a race condition between
phydev->adjust_link() and a MDIO transaction in the phy interrupt
handler. The issue was reproduced with the ethernet FEC driver and a
micrel KSZ9031 phy.

[  146.195696] fec 2188000.ethernet eth0: MDIO read timeout
[  146.201779] ------------[ cut here ]------------
[  146.206671] WARNING: CPU: 0 PID: 571 at drivers/net/phy/phy.c:942 phy_error+0x24/0x6c
[  146.214744] Modules linked in: bnep imx_vdoa imx_sdma evbug
[  146.220640] CPU: 0 PID: 571 Comm: irq/128-2188000 Not tainted 5.18.0-rc3-00080-gd569e86915b7 #9
[  146.229563] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
[  146.236257]  unwind_backtrace from show_stack+0x10/0x14
[  146.241640]  show_stack from dump_stack_lvl+0x58/0x70
[  146.246841]  dump_stack_lvl from __warn+0xb4/0x24c
[  146.251772]  __warn from warn_slowpath_fmt+0x5c/0xd4
[  146.256873]  warn_slowpath_fmt from phy_error+0x24/0x6c
[  146.262249]  phy_error from kszphy_handle_interrupt+0x40/0x48
[  146.268159]  kszphy_handle_interrupt from irq_thread_fn+0x1c/0x78
[  146.274417]  irq_thread_fn from irq_thread+0xf0/0x1dc
[  146.279605]  irq_thread from kthread+0xe4/0x104
[  146.284267]  kthread from ret_from_fork+0x14/0x28
[  146.289164] Exception stack(0xe6fa1fb0 to 0xe6fa1ff8)
[  146.294448] 1fa0:                                     00000000 00000000 00000000 00000000
[  146.302842] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[  146.311281] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[  146.318262] irq event stamp: 12325
[  146.321780] hardirqs last  enabled at (12333): [<c01984c4>] __up_console_sem+0x50/0x60
[  146.330013] hardirqs last disabled at (12342): [<c01984b0>] __up_console_sem+0x3c/0x60
[  146.338259] softirqs last  enabled at (12324): [<c01017f0>] __do_softirq+0x2c0/0x624
[  146.346311] softirqs last disabled at (12319): [<c01300ac>] __irq_exit_rcu+0x138/0x178
[  146.354447] ---[ end trace 0000000000000000 ]---

With the FEC driver phydev->adjust_link() calls fec_enet_adjust_link()
calls fec_stop()/fec_restart() and both these function reset and
temporary disable the FEC disrupting any MII transaction that
could be happening at the same time.

fec_enet_adjust_link() and phy_read() can be running at the same time
when we have one additional interrupt before the phy_state_machine() is
able to terminate.

Thread 1 (phylib WQ)       | Thread 2 (phy interrupt)
                           |
                           | phy_interrupt()            <-- PHY IRQ
                           |  handle_interrupt()
                           |   phy_read()
                           |   phy_trigger_machine()
                           |    --> schedule phylib WQ
                           |
                           |
phy_state_machine()        |
 phy_check_link_status()   |
  phy_link_change()        |
   phydev->adjust_link()   |
    fec_enet_adjust_link() |
     --> FEC reset         | phy_interrupt()            <-- PHY IRQ
                           |  phy_read()
                           |

Fix this by acquiring the phydev lock in phy_interrupt().

Link: https://lore.kernel.org/all/20220422152612.GA510015@francesco-nb.int.toradex.com/
Fixes: c974bdbc3e ("net: phy: Use threaded IRQ, to allow IRQ from sleeping devices")
cc: <stable@vger.kernel.org>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220506060815.327382-1-francesco.dolcini@toradex.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-09 17:48:17 -07:00
Yang Yingliang
51ca86b4c9 ethernet: tulip: fix missing pci_disable_device() on error in tulip_init_one()
Fix the missing pci_disable_device() before return
from tulip_init_one() in the error handling case.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220506094250.3630615-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-09 15:52:38 -07:00
Yang Yingliang
e4b1045bf9 ionic: fix missing pci_release_regions() on error in ionic_probe()
If ionic_map_bars() fails, pci_release_regions() need be called.

Fixes: fbfb803153 ("ionic: Add hardware init and device commands")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220506034040.2614129-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-09 15:49:12 -07:00
Guangbin Huang
443edfd6d4 net: hns3: fix incorrect type of argument in declaration of function hclge_comm_get_rss_indir_tbl
The argument rss_ind_tbl_size is type u16 in function definition of
hclge_comm_get_rss_indir_tbl(), but it is set to type __le16 in function
declaration by mistake, so fix it.

Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-09 14:30:38 +01:00
Guangbin Huang
a1aed456e3 net: hns3: add query vf ring and vector map relation
This patch adds a new mailbox opcode to query map relation between
vf ring and vector.

Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-09 14:30:37 +01:00
Jie Wang
416eedb603 net: hns3: add byte order conversion for VF to PF mailbox message
This patch uses __le16/__32 to define mailbox data structures. Then byte
order conversion are added for mailbox messages from VF to PF.

Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-09 14:30:37 +01:00
Jie Wang
767975e582 net: hns3: add byte order conversion for PF to VF mailbox message
Currently, hns3 mailbox processing between PF and VF missed to convert
message byte order and use data type u16 instead of __le16 for mailbox
data process. These processes may cause problems between different
architectures.

So this patch uses __le16/__le32 data type to define mailbox data
structures. To be compatible with old hns3 driver, these structures use
one-byte alignment. Then byte order conversions are added to mailbox
messages from PF to VF.

Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-09 14:30:37 +01:00
Yufeng Mo
bbed702412 net: hns3: remove the affinity settings of vector0
Vector0 is used for common interrupt control events and is
irrelevant to performance. Currently, the driver sets the
default affinity of vector0 to NUMA nodes, which is unnecessary.
Therefore, the default setting is removed, and the driver does
not set the affinity for vector0.

Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-09 14:30:37 +01:00
Hao Chen
a4fe9b6db6 net: hns3: fix access null pointer issue when set tx-buf-size as 0
When set tx-buf-size as 0 by ethtool, hns3_init_tx_spare_buffer()
will return directly and priv->ring->tx_spare->len is uninitialized,
then print function access priv->ring->tx_spare->len will cause
this issue.

When set tx-buf-size as 0 by ethtool, the print function will
print 0 directly and not access priv->ring->tx_spare->len.

Fixes: 2373b35c24 ("net: hns3: add log for setting tx spare buf size")
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-09 14:30:37 +01:00
Johannes Berg
9e2db50f1e mac80211_hwsim: call ieee80211_tx_prepare_skb under RCU protection
This is needed since it might use (and pass out) pointers to
e.g. keys protected by RCU. Can't really happen here as the
frames aren't encrypted, but we need to still adhere to the
rules.

Fixes: cacfddf82b ("mac80211_hwsim: initialize ieee80211_tx_info at hw_scan_work")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20220505230421.5f139f9de173.I77ae111a28f7c0e9fd1ebcee7f39dbec5c606770@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-05-09 14:00:07 +02:00
Johannes Berg
a59d55568d mac80211_hwsim: fix RCU protected chanctx access
We need to RCU protect the chanctx_conf access, so
do that.

Fixes: 585625c955 ("mac80211_hwsim: check TX and STA bandwidth")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20220505230421.fb8055c081a2.Ic6da3307c77a909bd61a0ea25dc2a4b08fe1b03f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-05-09 14:00:07 +02:00
Wen Gong
9497b7880f ath11k: reset 11d state in process of recovery
When doing simulate_fw_crash operation periodically with a short interval
time such as 10 seconds, it is easy happened WMI command timed out for
WMI_SCAN_CHAN_LIST_CMDID in ath11k_reg_update_chan_list().

log:
[42287.610053] ath11k_pci 0000:01:00.0: wmi command 12291 timeout
[42287.610064] ath11k_pci 0000:01:00.0: failed to send WMI_SCAN_CHAN_LIST cmd
[42287.610073] ath11k_pci 0000:01:00.0: failed to perform regd update : -11

Note that this issue does not occur with a longer interval such as 20 seconds.

The reason the issue occurs with a shorter interval is the following steps:
1) Upon initial boot, or after device recovery, the initial hw scan plus
the 11d scan will run, and when 6 GHz support is present, these scans
can take up to 12 seconds to complete, so ath11k_reg_update_chan_list()
is still waiting the completion of ar->completed_11d_scan.
2) If a simulate_fw_crash operation is received during this time, those
scans do not complete, and ath11k_core_pre_reconfigure_recovery()
complete the ar->completed_11d_scan, then ath11k_reg_update_chan_list()
wakeup and start to send WMI_SCAN_CHAN_LIST_CMDID, but firmware is crashed
at this moment, so wmi timed out occur.

To address this issue, reset the 11d state during device recovery so that
WMI_SCAN_CHAN_LIST_CMDID does not timed out for short interval time such
as 10 seconds.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3

Fixes: 1f682dc9fb ("ath11k: reduce the wait time of 11d scan and hw scan while add interface")
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220505034636.29582-1-quic_wgong@quicinc.com
2022-05-09 14:54:37 +03:00
Chin-Yen Lee
4fb3f1f181 rtw88: adjust adaptivity option to 1
Fine tune algorithm of adaptivity sensitivity to avoid disconnecting
from AP suddenly in field.

Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220506235045.4669-1-pkshih@realtek.com
2022-05-09 14:40:37 +03:00
Yuiko Oshino
53ad228682 net: phy: smsc: add LAN8742 phy support.
The current phy IDs on the available hardware.
        LAN8742 0x0007C130, 0x0007C131

Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-09 12:20:56 +01:00
Yuiko Oshino
e078286a13 net: phy: microchip: update LAN88xx phy ID and phy ID mask.
update LAN88xx phy ID and phy ID mask because the existing code conflicts with the LAN8742 phy.

The current phy IDs on the available hardware.
        LAN8742 0x0007C130, 0x0007C131
        LAN88xx 0x0007C132

Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-09 12:20:56 +01:00
Oleksij Rempel
165cd04fe2 net: phy: dp83td510: Add support for the DP83TD510 Ethernet PHY
The DP83TD510E is an ultra-low power Ethernet physical layer transceiver
that supports 10M single pair cable.

This driver was tested with NXP SJA1105, STMMAC and ASIX AX88772B USB Ethernet
controller.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-09 12:09:30 +01:00
Oleksij Rempel
2013ad8836 net: phy: export genphy_c45_baset1_read_status()
Export genphy_c45_baset1_read_status() to make it reusable by PHY drivers.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-09 12:09:30 +01:00
Oleksij Rempel
acb8c5aec2 net: phy: genphy_c45_pma_baset1_read_master_slave: read actual configuration
Since MDIO_PMA_PMD_BT1_CTRL register shows actual configuration (and
forced state configuration is equal to the state), we should show
this configuration for ethtool.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-09 12:09:29 +01:00
Oleksij Rempel
b9a366f3d8 net: phy: introduce genphy_c45_pma_baset1_read_master_slave()
Move baset1 specific part of genphy_c45_read_pma() code to
separate function to make it reusable by PHY drivers.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-09 12:09:29 +01:00
Oleksij Rempel
a04dd88f77 net: phy: genphy_c45_pma_baset1_setup_master_slave: do no set unknown configuration
Do not change default master/slave forced configuration if no changes was
requested.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-09 12:09:29 +01:00
Oleksij Rempel
90532850eb net: phy: introduce genphy_c45_pma_baset1_setup_master_slave()
Move baset1 specific part of genphy_c45_pma_setup_forced() code to
separate function to make it reusable by PHY drivers.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-09 12:09:29 +01:00
Oleksij Rempel
a7f0e4bea8 net: phy: genphy_c45_baset1_an_config_aneg: do no set unknown configuration
Do not change default master/slave autoneg configuration if no
changes was requested.

Fixes: 3da8ffd854 ("net: phy: Add 10BASE-T1L support in phy-c45")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-09 12:09:29 +01:00
Alaa Mohamed
e92695e506 net: vxlan: Add extack support to vxlan_fdb_delete
This patch adds extack msg support to vxlan_fdb_delete and vxlan_fdb_parse.
extack is used to propagate meaningful error msgs to the user of vxlan
fdb netlink api

Signed-off-by: Alaa Mohamed <eng.alaamohamedsoliman.am@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-09 11:58:20 +01:00
Alaa Mohamed
ca4567f1e6 rtnetlink: add extack support in fdb del handlers
Add extack support to .ndo_fdb_del in netdevice.h and
all related methods.

Signed-off-by: Alaa Mohamed <eng.alaamohamedsoliman.am@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-09 11:58:20 +01:00
Haijun Liu
de49ea38ba net: wwan: t7xx: Device deep sleep lock/unlock
Introduce the mechanism to lock/unlock the device 'deep sleep' mode.
When the PCIe link state is L1.2 or L2, the host side still can keep
the device is in D0 state from the host side point of view. At the same
time, if the device's 'deep sleep' mode is unlocked, the device will
go to 'deep sleep' while it is still in D0 state on the host side.

Signed-off-by: Haijun Liu <haijun.liu@mediatek.com>
Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Co-developed-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Signed-off-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-09 10:51:59 +01:00
Haijun Liu
d10b3a695b net: wwan: t7xx: Runtime PM
Enables runtime power management callbacks including runtime_suspend
and runtime_resume. Autosuspend is used to prevent overhead by frequent
wake-ups.

Signed-off-by: Haijun Liu <haijun.liu@mediatek.com>
Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Co-developed-by: Eliot Lee <eliot.lee@intel.com>
Signed-off-by: Eliot Lee <eliot.lee@intel.com>
Signed-off-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-09 10:51:59 +01:00
Haijun Liu
46e8f49ed7 net: wwan: t7xx: Introduce power management
Implements suspend, resumes, freeze, thaw, poweroff, and restore
`dev_pm_ops` callbacks.

From the host point of view, the t7xx driver is one entity. But, the
device has several modules that need to be addressed in different ways
during power management (PM) flows.
The driver uses the term 'PM entities' to refer to the 2 DPMA and
2 CLDMA HW blocks that need to be managed during PM flows.
When a dev_pm_ops function is called, the PM entities list is iterated
and the matching function is called for each entry in the list.

Signed-off-by: Haijun Liu <haijun.liu@mediatek.com>
Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Co-developed-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Signed-off-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-09 10:51:59 +01:00
Haijun Liu
05d19bf500 net: wwan: t7xx: Add WWAN network interface
Creates the Cross Core Modem Network Interface (CCMNI) which implements
the wwan_ops for registration with the WWAN framework, CCMNI also
implements the net_device_ops functions used by the network device.
Network device operations include open, close, start transmission, TX
timeout and change MTU.

Signed-off-by: Haijun Liu <haijun.liu@mediatek.com>
Co-developed-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Co-developed-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Signed-off-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-09 10:51:59 +01:00
Haijun Liu
d642b012df net: wwan: t7xx: Add data path interface
Data Path Modem AP Interface (DPMAIF) HIF layer provides methods
for initialization, ISR, control and event handling of TX/RX flows.

DPMAIF TX
Exposes the 'dmpaif_tx_send_skb' function which can be used by the
network device to transmit packets.
The uplink data management uses a Descriptor Ring Buffer (DRB).
First DRB entry is a message type that will be followed by 1 or more
normal DRB entries. Message type DRB will hold the skb information
and each normal DRB entry holds a pointer to the skb payload.

DPMAIF RX
The downlink buffer management uses Buffer Address Table (BAT) and
Packet Information Table (PIT) rings.
The BAT ring holds the address of skb data buffer for the HW to use,
while the PIT contains metadata about a whole network packet including
a reference to the BAT entry holding the data buffer address.
The driver reads the PIT and BAT entries written by the modem, when
reaching a threshold, the driver will reload the PIT and BAT rings.

Signed-off-by: Haijun Liu <haijun.liu@mediatek.com>
Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Co-developed-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Signed-off-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-09 10:51:59 +01:00
Haijun Liu
33f78ab5a3 net: wwan: t7xx: Data path HW layer
Data Path Modem AP Interface (DPMAIF) HW layer provides HW abstraction
for the upper layer (DPMAIF HIF). It implements functions to do the HW
configuration, TX/RX control and interrupt handling.

Signed-off-by: Haijun Liu <haijun.liu@mediatek.com>
Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Co-developed-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Signed-off-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-09 10:51:59 +01:00
Chandrashekar Devegowda
61b7a2916a net: wwan: t7xx: Add AT and MBIM WWAN ports
Adds AT and MBIM ports to the port proxy infrastructure.
The initialization method is responsible for creating the corresponding
ports using the WWAN framework infrastructure. The implemented WWAN port
operations are start, stop, and TX.

Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Co-developed-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Signed-off-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-09 10:51:59 +01:00
Haijun Liu
da45d2566a net: wwan: t7xx: Add control port
Control Port implements driver control messages such as modem-host
handshaking, controls port enumeration, and handles exception messages.

The handshaking process between the driver and the modem happens during
the init sequence. The process involves the exchange of a list of
supported runtime features to make sure that modem and host are ready
to provide proper feature lists including port enumeration. Further
features can be enabled and controlled in this handshaking process.

Signed-off-by: Haijun Liu <haijun.liu@mediatek.com>
Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Co-developed-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Signed-off-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-09 10:51:59 +01:00
Haijun Liu
48cc2f5ef8 net: wwan: t7xx: Add port proxy infrastructure
Port-proxy provides a common interface to interact with different types
of ports. Ports export their configuration via `struct t7xx_port` and
operate as defined by `struct port_ops`.

Signed-off-by: Haijun Liu <haijun.liu@mediatek.com>
Co-developed-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Co-developed-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Signed-off-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-09 10:51:59 +01:00
Haijun Liu
13e920d93e net: wwan: t7xx: Add core components
Registers the t7xx device driver with the kernel. Setup all the core
components: PCIe layer, Modem Host Cross Core Interface (MHCCIF),
modem control operations, modem state machine, and build
infrastructure.

* PCIe layer code implements driver probe and removal.
* MHCCIF provides interrupt channels to communicate events
  such as handshake, PM and port enumeration.
* Modem control implements the entry point for modem init,
  reset and exit.
* The modem status monitor is a state machine used by modem control
  to complete initialization and stop. It is used also to propagate
  exception events reported by other components.

Signed-off-by: Haijun Liu <haijun.liu@mediatek.com>
Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Co-developed-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Signed-off-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-09 10:51:59 +01:00
Haijun Liu
39d439047f net: wwan: t7xx: Add control DMA interface
Cross Layer DMA (CLDMA) Hardware interface (HIF) enables the control
path of Host-Modem data transfers. CLDMA HIF layer provides a common
interface to the Port Layer.

CLDMA manages 8 independent RX/TX physical channels with data flow
control in HW queues. CLDMA uses ring buffers of General Packet
Descriptors (GPD) for TX/RX. GPDs can represent multiple or single
data buffers (DB).

CLDMA HIF initializes GPD rings, registers ISR handlers for CLDMA
interrupts, and initializes CLDMA HW registers.

CLDMA TX flow:
1. Port Layer write
2. Get DB address
3. Configure GPD
4. Triggering processing via HW register write

CLDMA RX flow:
1. CLDMA HW sends a RX "done" to host
2. Driver starts thread to safely read GPD
3. DB is sent to Port layer
4. Create a new buffer for GPD ring

Note: This patch does not enable compilation since it has dependencies
such as t7xx_pcie_mac_clear_int()/t7xx_pcie_mac_set_int() and
struct t7xx_pci_dev which are added by the core patch.

Signed-off-by: Haijun Liu <haijun.liu@mediatek.com>
Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Co-developed-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Signed-off-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-09 10:51:58 +01:00
Taehee Yoo
49e6123c65 net: sfc: fix memory leak due to ptp channel
It fixes memory leak in ring buffer change logic.

When ring buffer size is changed(ethtool -G eth0 rx 4096), sfc driver
works like below.
1. stop all channels and remove ring buffers.
2. allocates new buffer array.
3. allocates rx buffers.
4. start channels.

While the above steps are working, it skips some steps if the channel
doesn't have a ->copy callback function.
Due to ptp channel doesn't have ->copy callback, these above steps are
skipped for ptp channel.
It eventually makes some problems.
a. ptp channel's ring buffer size is not changed, it works only
   1024(default).
b. memory leak.

The reason for memory leak is to use the wrong ring buffer values.
There are some values, which is related to ring buffer size.
a. efx->rxq_entries
 - This is global value of rx queue size.
b. rx_queue->ptr_mask
 - used for access ring buffer as circular ring.
 - roundup_pow_of_two(efx->rxq_entries) - 1
c. rx_queue->max_fill
 - efx->rxq_entries - EFX_RXD_HEAD_ROOM

These all values should be based on ring buffer size consistently.
But ptp channel's values are not.
a. efx->rxq_entries
 - This is global(for sfc) value, always new ring buffer size.
b. rx_queue->ptr_mask
 - This is always 1023(default).
c. rx_queue->max_fill
 - This is new ring buffer size - EFX_RXD_HEAD_ROOM.

Let's assume we set 4096 for rx ring buffer,

                      normal channel     ptp channel
efx->rxq_entries      4096               4096
rx_queue->ptr_mask    4095               1023
rx_queue->max_fill    4086               4086

sfc driver allocates rx ring buffers based on these values.
When it allocates ptp channel's ring buffer, 4086 ring buffers are
allocated then, these buffers are attached to the allocated array.
But ptp channel's ring buffer array size is still 1024(default)
and ptr_mask is still 1023 too.
So, 3062 ring buffers will be overwritten to the array.
This is the reason for memory leak.

Test commands:
   ethtool -G <interface name> rx 4096
   while :
   do
       ip link set <interface name> up
       ip link set <interface name> down
   done

In order to avoid this problem, it adds ->copy callback to ptp channel
type.
So that rx_queue->ptr_mask value will be updated correctly.

Fixes: 7c236c43b8 ("sfc: Add support for IEEE-1588 PTP")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-09 10:01:48 +01:00
Petr Machata
c353fb0d4c mlxsw: spectrum_router: Take router lock in router notifier handler
For notifications that the router needs to handle, router lock is taken.
Further, at least to determine whether an event is related to a tunnel
underlay, router lock also needs to be taken. Due to this, the router lock
is always taken for each unhandled event, and also for some handled events,
even if they are not related to underlay. Thus each event implies at least
one router lock, sometimes two.

Instead of deferring the locking to the leaf handlers, take the lock in the
router notifier handler always. This simplifies thinking about the locking
state, and in some cases saves one lock cycle.

Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-08 11:46:20 +01:00
Petr Machata
05a8d7d4fa mlxsw: spectrum: Update a comment
The position of netdevice notifier registration no longer depends on the
router initialization, because the event handler no longer dispatches to
the router code. Update the comment at the registration to that effect.

Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-08 11:46:20 +01:00
Petr Machata
75ef434228 mlxsw: spectrum: Move handling of tunnel events to router code
The events related to IPIP tunnels are handled by the router code. Move the
handling from the central dispatcher in spectrum.c to the new notifier
handler in the router module.

Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-08 11:46:20 +01:00
Petr Machata
ba81954cd5 mlxsw: spectrum: Move handling of router events to router code
The events NETDEV_PRE_CHANGEADDR, NETDEV_CHANGEADDR and NETDEV_CHANGEMTU
have implications for in-ASIC router interface objects, and as such are
handled in the router module. Move the handling from the central dispatcher
in spectrum.c to the new notifier handler in the router module.

Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-08 11:46:20 +01:00
Petr Machata
f40e600b36 mlxsw: spectrum: Move handling of HW stats events to router code
L3 HW stats are implemented in mlxsw as RIF counters, and therefore the
code resides in spectrum_router. Exclude the offload xstats events from the
mlxsw_sp_netdevice_event_is_router() predicate, and instead recreate the
glue code in the router module.

Previously, the order of dispatch was that for events on tunnels, a
dedicated handler was called, which however did not handle HW stats events.
But there is nothing special about tunnel devices as far as HW stats: there
is a RIF associated with the tunnel netdevice, and that RIF is where the
counter should be installed. Therefore now, HW stats events are tested
first, independent of netdevice type. The upshot is that as of this commit,
mlxsw supports L3 HW stats work on GRE tunnels.

Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-08 11:46:20 +01:00
Petr Machata
4f8afb680f mlxsw: spectrum: Move handling of VRF events to router code
Events involving VRF, as L3 concern, are handled in the router code, by the
helper mlxsw_sp_netdevice_vrf_event(). The handler is currently invoked
from the centralized dispatcher in spectrum.c. Instead, move the call to
the newly-introduced router-specific notifier handler.

Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-08 11:46:20 +01:00
Petr Machata
0a27cb1692 mlxsw: spectrum_router: Add a dedicated notifier block
Currently all netdevice events are handled in the centralized notifier
handler maintained by spectrum.c. Since a number of events are involving
router code, spectrum.c needs to dispatch them to spectrum_router.c. The
spectrum module therefore needs to know more about the router code than it
should have, and there is are several API points through which the two
modules communicate.

To simplify the notifier handlers, introduce a new notifier into the router
module.

Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-08 11:46:20 +01:00
Petr Machata
7cf0f96df1 mlxsw: spectrum: Tolerate enslaving of various devices to VRF
Enslaving netdevices to VRF is currently handled through an
mlxsw_sp_is_vrf_event() conditional in mlxsw_sp_netdevice_event(). In the
following patch sets, VRF enslavement will be handled purely in the router
code. Therefore make handlers of NETDEV_PRECHANGEUPPER tolerant of
enslaving to VRF, so that they do not bounce the change.

For NETDEV_CHANGEUPPER, drop the WARN_ON(1) and bounce from
mlxsw_sp_netdevice_port_vlan_event(). This is the only handler that warned
and bounces even in the CHANGEUPPER code, other handler quietly do nothing
when they encounter an unfamiliar upper.

Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-08 11:46:20 +01:00
Jakub Kicinski
6f83cb8cbf net: wan: switch to netif_napi_add_weight()
A handful of WAN drivers use custom napi weights,
switch them to the new API.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-08 11:33:57 +01:00
Jakub Kicinski
d484735dcf net: virtio: switch to netif_napi_add_weight()
virtio netdev driver uses a custom napi weight, switch to the new
API for setting custom weight.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-08 11:33:57 +01:00
Jakub Kicinski
8ded532cd1 r8152: switch to netif_napi_add_weight()
r8152 uses a custom napi weight, switch to the new
API for setting custom weight.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-08 11:33:57 +01:00
Jakub Kicinski
b707b89f7b eth: switch to netif_napi_add_weight()
Switch all Ethernet drivers which use custom napi weights
to the new API.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-08 11:33:57 +01:00