Commit graph

112,392 commits

Author SHA1 Message Date
Jakub Kicinski
be8af67fab caif_virtio: switch to netif_napi_add_weight()
caif_virtio uses a custom napi weight, switch to the new
API for setting custom weights.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-08 11:33:57 +01:00
Vladimir Oltean
28de0f9fec net: dsa: felix: perform MDB migration based on ocelot->multicast list
The felix driver is the only user of dsa_port_walk_mdbs(), and there
isn't even a good reason for it, considering that the host MDB entries
are already saved by the ocelot switch lib in the ocelot->multicast list.

Rewrite the multicast entry migration procedure around the
ocelot->multicast list so we can delete dsa_port_walk_mdbs().

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-06 21:00:12 -07:00
Vladimir Oltean
a51c1c3f32 net: dsa: felix: stop migrating FDBs back and forth on tag proto change
I just realized we don't need to migrate the host-filtered FDB entries
when the tagging protocol changes from "ocelot" to "ocelot-8021q".

Host-filtered addresses are learned towards the PGID_CPU "multicast"
port group, reserved by software, which contains BIT(ocelot->num_phys_ports).
That is the "special" port entry in the analyzer block for the CPU port
module.

In "ocelot" mode, the CPU port module's packets are redirected to the
NPI port.

In "ocelot-8021q" mode, felix_8021q_cpu_port_init() does something funny
anyway, and changes PGID_CPU to stop pointing at the CPU port module and
start pointing at the physical port where the DSA master is attached.

The fact that we can alter the destination of packets learned towards
PGID_CPU without altering the MAC table entries themselves means that it
is pointless to walk through the FDB entries, forget that they were
learned towards PGID_CPU, and re-learn them towards the "unicast" PGID
associated with the physical port connected to the DSA master. We can
let the PGID_CPU value change simply alter the destination of the
host-filtered unicast packets in one fell swoop.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-06 21:00:12 -07:00
Vladimir Oltean
2c110abc46 net: dsa: felix: use PGID_CPU for FDB entry migration on NPI port
ocelot_fdb_add() redirects FDB entries installed on the NPI port towards
the special reserved PGID_CPU used for host-filtered addresses. PGID_CPU
contains BIT(ocelot->num_phys_ports) in the destination port mask, which
is code name for the CPU port module.

Whereas felix_migrate_fdbs_to_*_port() uses the ocelot->num_phys_ports
PGID directly, and it appears that this works too. Even if this PGID is
set to zero, apparently its number is special and packets still reach
the CPU port module.

Nonetheless, in the end, these addresses end up in the same place
regardless of whether they go through an extra indirection layer or not.
Use PGID_CPU across to have more uniformity.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-06 21:00:11 -07:00
David Thompson
0a02e282ba mlxbf_gige: increase MDIO polling rate to 5us
This patch increases the polling rate used by the
mlxbf_gige driver on the MDIO bus.  The previous
polling rate was every 100us, and the new rate is
every 5us.  With this change the amount of time
spent waiting for the MDIO BUSY signal to de-assert
drops from ~100us to ~27us for each operation.

Signed-off-by: David Thompson <davthompson@nvidia.com>
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Link: https://lore.kernel.org/r/20220505162309.20050-1-davthompson@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-06 15:54:20 -07:00
Kees Cook
1c7ab9cd98 net: chelsio: cxgb4: Avoid potential negative array offset
Using min_t(int, ...) as a potential array index implies to the compiler
that negative offsets should be allowed. This is not the case, though.
Replace "int" with "unsigned int". Fixes the following warning exposed
under future CONFIG_FORTIFY_SOURCE improvements:

In file included from include/linux/string.h:253,
                 from include/linux/bitmap.h:11,
                 from include/linux/cpumask.h:12,
                 from include/linux/smp.h:13,
                 from include/linux/lockdep.h:14,
                 from include/linux/rcupdate.h:29,
                 from include/linux/rculist.h:11,
                 from include/linux/pid.h:5,
                 from include/linux/sched.h:14,
                 from include/linux/delay.h:23,
                 from drivers/net/ethernet/chelsio/cxgb4/t4_hw.c:35:
drivers/net/ethernet/chelsio/cxgb4/t4_hw.c: In function 't4_get_raw_vpd_params':
include/linux/fortify-string.h:46:33: warning: '__builtin_memcpy' pointer overflow between offset 29 and size [2147483648, 4294967295] [-Warray-bounds]
   46 | #define __underlying_memcpy     __builtin_memcpy
      |                                 ^
include/linux/fortify-string.h:388:9: note: in expansion of macro '__underlying_memcpy'
  388 |         __underlying_##op(p, q, __fortify_size);                        \
      |         ^~~~~~~~~~~~~
include/linux/fortify-string.h:433:26: note: in expansion of macro '__fortify_memcpy_chk'
  433 | #define memcpy(p, q, s)  __fortify_memcpy_chk(p, q, s,                  \
      |                          ^~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/chelsio/cxgb4/t4_hw.c:2796:9: note: in expansion of macro 'memcpy'
 2796 |         memcpy(p->id, vpd + id, min_t(int, id_len, ID_LEN));
      |         ^~~~~~
include/linux/fortify-string.h:46:33: warning: '__builtin_memcpy' pointer overflow between offset 0 and size [2147483648, 4294967295] [-Warray-bounds]
   46 | #define __underlying_memcpy     __builtin_memcpy
      |                                 ^
include/linux/fortify-string.h:388:9: note: in expansion of macro '__underlying_memcpy'
  388 |         __underlying_##op(p, q, __fortify_size);                        \
      |         ^~~~~~~~~~~~~
include/linux/fortify-string.h:433:26: note: in expansion of macro '__fortify_memcpy_chk'
  433 | #define memcpy(p, q, s)  __fortify_memcpy_chk(p, q, s,                  \
      |                          ^~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/chelsio/cxgb4/t4_hw.c:2798:9: note: in expansion of macro 'memcpy'
 2798 |         memcpy(p->sn, vpd + sn, min_t(int, sn_len, SERNUM_LEN));
      |         ^~~~~~

Additionally remove needless cast from u8[] to char * in last strim()
call.

Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/202205031926.FVP7epJM-lkp@intel.com
Fixes: fc9279298e ("cxgb4: Search VPD with pci_vpd_find_ro_info_keyword()")
Fixes: 24c521f81c ("cxgb4: Use pci_vpd_find_id_string() to find VPD ID string")
Cc: Raju Rangoju <rajur@chelsio.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220505233101.1224230-1-keescook@chromium.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-06 15:41:27 -07:00
Jakub Kicinski
53e2cb3b2a Merge branch '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:

====================
10GbE Intel Wired LAN Driver Updates 2022-05-05

This series contains updates to ixgbe and igb drivers.

Jeff Daly adjusts type for 'allow_unsupported_sfp' to match the
associated struct value for ixgbe.

Alaa Mohamed converts, deprecated, kmap() call to kmap_local_page() for
igb.

* '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
  igb: Convert kmap() to kmap_local_page()
  ixgbe: Fix module_param allow_unsupported_sfp type
====================

Link: https://lore.kernel.org/r/20220505155651.2606195-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-06 15:39:28 -07:00
Michal Michalik
a11b6c1a38 ice: fix PTP stale Tx timestamps cleanup
Read stale PTP Tx timestamps from PHY on cleanup.

After running out of Tx timestamps request handlers, hardware (HW) stops
reporting finished requests. Function ice_ptp_tx_tstamp_cleanup() used
to only clean up stale handlers in driver and was leaving the hardware
registers not read. Not reading stale PTP Tx timestamps prevents next
interrupts from arriving and makes timestamping unusable.

Fixes: ea9b847cda ("ice: enable transmit timestamps for E810 devices")
Signed-off-by: Michal Michalik <michal.michalik@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-05-06 10:09:24 -07:00
Anatolii Gerasymenko
6096dae926 ice: clear stale Tx queue settings before configuring
The iAVF driver uses 3 virtchnl op codes to communicate with the PF
regarding the VF Tx queues:

* VIRTCHNL_OP_CONFIG_VSI_QUEUES configures the hardware and firmware
logic for the Tx queues

* VIRTCHNL_OP_ENABLE_QUEUES configures the queue interrupts

* VIRTCHNL_OP_DISABLE_QUEUES disables the queue interrupts and Tx rings.

There is a bug in the iAVF driver due to the race condition between VF
reset request and shutdown being executed in parallel. This leads to a
break in logic and VIRTCHNL_OP_DISABLE_QUEUES is not being sent.

If this occurs, the PF driver never cleans up the Tx queues. This results
in leaving behind stale Tx queue settings in the hardware and firmware.

The most obvious outcome is that upon the next
VIRTCHNL_OP_CONFIG_VSI_QUEUES, the PF will fail to program the Tx
scheduler node due to a lack of space.

We need to protect ICE driver against such situation.

To fix this, make sure we clear existing stale settings out when
handling VIRTCHNL_OP_CONFIG_VSI_QUEUES. This ensures we remove the
previous settings.

Calling ice_vf_vsi_dis_single_txq should be safe as it will do nothing if
the queue is not configured. The function already handles the case when the
Tx queue is not currently configured and exits with a 0 return in that
case.

Fixes: 7ad15440ac ("ice: Refactor VIRTCHNL_OP_CONFIG_VSI_QUEUES handling")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-05-06 10:09:24 -07:00
Ivan Vecera
486b9eee57 ice: Fix race during aux device (un)plugging
Function ice_plug_aux_dev() assigns pf->adev field too early prior
aux device initialization and on other side ice_unplug_aux_dev()
starts aux device deinit and at the end assigns NULL to pf->adev.
This is wrong because pf->adev should always be non-NULL only when
aux device is fully initialized and ready. This wrong order causes
a crash when ice_send_event_to_aux() call occurs because that function
depends on non-NULL value of pf->adev and does not assume that
aux device is half-initialized or half-destroyed.
After order correction the race window is tiny but it is still there,
as Leon mentioned and manipulation with pf->adev needs to be protected
by mutex.

Fix (un-)plugging functions so pf->adev field is set after aux device
init and prior aux device destroy and protect pf->adev assignment by
new mutex. This mutex is also held during ice_send_event_to_aux()
call to ensure that aux device is valid during that call.
Note that device lock used ice_send_event_to_aux() needs to be kept
to avoid race with aux drv unload.

Reproducer:
cycle=1
while :;do
        echo "#### Cycle: $cycle"

        ip link set ens7f0 mtu 9000
        ip link add bond0 type bond mode 1 miimon 100
        ip link set bond0 up
        ifenslave bond0 ens7f0
        ip link set bond0 mtu 9000
        ethtool -L ens7f0 combined 1
        ip link del bond0
        ip link set ens7f0 mtu 1500
        sleep 1

        let cycle++
done

In short when the device is added/removed to/from bond the aux device
is unplugged/plugged. When MTU of the device is changed an event is
sent to aux device asynchronously. This can race with (un)plugging
operation and because pf->adev is set too early (plug) or too late
(unplug) the function ice_send_event_to_aux() can touch uninitialized
or destroyed fields. In the case of crash below pf->adev->dev.mutex.

Crash:
[   53.372066] bond0: (slave ens7f0): making interface the new active one
[   53.378622] bond0: (slave ens7f0): Enslaving as an active interface with an u
p link
[   53.386294] IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
[   53.549104] bond0: (slave ens7f1): Enslaving as a backup interface with an up
 link
[   54.118906] ice 0000:ca:00.0 ens7f0: Number of in use tx queues changed inval
idating tc mappings. Priority traffic classification disabled!
[   54.233374] ice 0000:ca:00.1 ens7f1: Number of in use tx queues changed inval
idating tc mappings. Priority traffic classification disabled!
[   54.248204] bond0: (slave ens7f0): Releasing backup interface
[   54.253955] bond0: (slave ens7f1): making interface the new active one
[   54.274875] bond0: (slave ens7f1): Releasing backup interface
[   54.289153] bond0 (unregistering): Released all slaves
[   55.383179] MII link monitoring set to 100 ms
[   55.398696] bond0: (slave ens7f0): making interface the new active one
[   55.405241] BUG: kernel NULL pointer dereference, address: 0000000000000080
[   55.405289] bond0: (slave ens7f0): Enslaving as an active interface with an u
p link
[   55.412198] #PF: supervisor write access in kernel mode
[   55.412200] #PF: error_code(0x0002) - not-present page
[   55.412201] PGD 25d2ad067 P4D 0
[   55.412204] Oops: 0002 [#1] PREEMPT SMP NOPTI
[   55.412207] CPU: 0 PID: 403 Comm: kworker/0:2 Kdump: loaded Tainted: G S
           5.17.0-13579-g57f2d6540f03 #1
[   55.429094] bond0: (slave ens7f1): Enslaving as a backup interface with an up
 link
[   55.430224] Hardware name: Dell Inc. PowerEdge R750/06V45N, BIOS 1.4.4 10/07/
2021
[   55.430226] Workqueue: ice ice_service_task [ice]
[   55.468169] RIP: 0010:mutex_unlock+0x10/0x20
[   55.472439] Code: 0f b1 13 74 96 eb e0 4c 89 ee eb d8 e8 79 54 ff ff 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 65 48 8b 04 25 40 ef 01 00 31 d2 <f0> 48 0f b1 17 75 01 c3 e9 e3 fe ff ff 0f 1f 00 0f 1f 44 00 00 48
[   55.491186] RSP: 0018:ff4454230d7d7e28 EFLAGS: 00010246
[   55.496413] RAX: ff1a79b208b08000 RBX: ff1a79b2182e8880 RCX: 0000000000000001
[   55.503545] RDX: 0000000000000000 RSI: ff4454230d7d7db0 RDI: 0000000000000080
[   55.510678] RBP: ff1a79d1c7e48b68 R08: ff4454230d7d7db0 R09: 0000000000000041
[   55.517812] R10: 00000000000000a5 R11: 00000000000006e6 R12: ff1a79d1c7e48bc0
[   55.524945] R13: 0000000000000000 R14: ff1a79d0ffc305c0 R15: 0000000000000000
[   55.532076] FS:  0000000000000000(0000) GS:ff1a79d0ffc00000(0000) knlGS:0000000000000000
[   55.540163] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   55.545908] CR2: 0000000000000080 CR3: 00000003487ae003 CR4: 0000000000771ef0
[   55.553041] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   55.560173] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   55.567305] PKRU: 55555554
[   55.570018] Call Trace:
[   55.572474]  <TASK>
[   55.574579]  ice_service_task+0xaab/0xef0 [ice]
[   55.579130]  process_one_work+0x1c5/0x390
[   55.583141]  ? process_one_work+0x390/0x390
[   55.587326]  worker_thread+0x30/0x360
[   55.590994]  ? process_one_work+0x390/0x390
[   55.595180]  kthread+0xe6/0x110
[   55.598325]  ? kthread_complete_and_exit+0x20/0x20
[   55.603116]  ret_from_fork+0x1f/0x30
[   55.606698]  </TASK>

Fixes: f9f5301e7e ("ice: Register auxiliary device to provide RDMA")
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-05-06 10:09:24 -07:00
Marcin Szycik
e0c7402270 Revert "ice: Hide bus-info in ethtool for PRs in switchdev mode"
This reverts commit bfaaba99e6.

Commit bfaaba99e6 ("ice: Hide bus-info in ethtool for PRs in switchdev
mode") was a workaround for lshw tool displaying incorrect
descriptions for port representors and PF in switchdev mode. Now the issue
has been fixed in the lshw tool itself [1].

Removing the workaround can be considered a regression, as the user might
be running older, unpatched lshw version. However, another important change
(ice: link representors to PCI device, which improves port representor
netdev naming with SET_NETDEV_DEV) also causes the same "regression" as
removing the workaround, i.e. unpatched lshw is able to access bus-info
information (this time not via ethtool) and the bug can occur. Therefore,
the workaround no longer prevents the bug and can be removed.

[1] 9bf4e4c9c1

Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-05-06 10:04:17 -07:00
Michal Swiatkowski
6384b76959 ice: link representors to PCI device
Link port representors to parent PCI device to benefit from
systemd defined naming scheme.

Example from ip tool:
 - without linking:
  eth0 ...
 - with linking:
  eth0 ...
  altname enp24s0f0npf0vf0

The port representor name is being shown in altname, because the name is
longer than IFNAMSIZ (16) limit. Altname can be used in ip tool.

Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-05-06 09:43:01 -07:00
Jakub Kicinski
ee8b7a1156 net: make drivers set the TSO limit not the GSO limit
Drivers should call the TSO setting helper, GSO is controllable
by user space.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-06 12:07:56 +01:00
Jakub Kicinski
6df6398f7c net: add netif_inherit_tso_max()
To make later patches smaller create a helper for inheriting
the TSO limitations of a lower device. The TSO in the name
is not an accident, subsequent patches will replace GSO
with TSO in more names.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-06 12:07:56 +01:00
Louis Peens
a7da2a864a nfp: flower: enable decap_v2 bit
Finally enable the decap_v2 feature bit now that all the
other bits are in place to configure it correctly.

Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-06 11:21:34 +01:00
Louis Peens
c83a0fbe97 nfp: flower: remove unused neighbour cache
With the neighbour entries now stored in a dedicated table there
is no use to make use of the tunnel route cache anymore, so remove
this.

Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-06 11:21:34 +01:00
Louis Peens
591c90a1d0 nfp: flower: link pre_tun flow rules with neigh entries
Add helper functions that can create links between flow rules
and cached neighbour entries. Also add the relevant calls to
these functions.

* When a new neighbour entry gets added cycle through the saved
  pre_tun flow list and link any relevant matches. Update the
  neighbour table on the nfp with this new information.
* When a new pre_tun flow rule gets added iterate through the
  save neighbour entries and link any relevant matches. Once
  again update the nfp neighbour table with any new links.
* Do the inverse when deleting - remove any created links and
  also inform the nfp of this.

Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-06 11:21:34 +01:00
Louis Peens
f1df7956c1 nfp: flower: rework tunnel neighbour configuration
This patch updates the way in which the tunnel neighbour entries
are handled. Previously they were mostly send-and-forget, with
just the destination IP's cached in a list. This update changes
to a scheme where the neighbour entry information is stored in
a hash table.

The reason for this is that the neighbour table will now also
be used on the decapsulation path, whereas previously it was
only used for encapsulation. We need to save more of the neighbour
information in order to link them with flower flows in follow
up patches.

Updating of the neighbour table is now also handled by the same
function, instead of separate  *_write_neigh_vX functions.

Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-06 11:21:34 +01:00
Louis Peens
9ee7c42183 nfp: flower: update nfp_tun_neigh structs
Prepare for more rework in following patches by updating
the existing nfp_neigh_structs. The update allows for
the same headers to be used for both old and new firmware,
with a slight length adjustment when sending the control message
to the firmware.

Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-06 11:21:34 +01:00
Louis Peens
9d5447ed44 nfp: flower: fixup ipv6/ipv4 route lookup for neigh events
When a callback is received to invalidate a neighbour entry
there is no need to try and populate any other flow information.
Only the flowX->daddr information is needed as lookup key to delete
an entry from the NFP neighbour table. Fix this by only doing the
lookup if the callback is for a new entry.

As part of this cleanup remove the setting of flow6.flowi6_proto, as
this is not needed either, it looks to be a possible leftover from a
previous implementation.

Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-06 11:21:34 +01:00
Louis Peens
38fc158e17 nfp: flower: enforce more strict pre_tun checks
Make sure that the rule also matches on source MAC address. On top
of that also now save the src and dst MAC addresses similar to how
vlan_tci is saved - this will be used in later comparisons with
neighbour entries. Indicate if the flow matched on ipv4 or ipv6.
Populate the vlan_tpid field that got added to the pre_run_rule
struct as well.

Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-06 11:21:34 +01:00
Louis Peens
e30b2b68c1 nfp: flower: add/remove predt_list entries
Add calls to add and remove flows to the predt_table. This very simply
just allocates and add a new pretun entry if detected as such, and
removes it when encountered on a delete flow.

Compatibility for older firmware is kept in place through the
DECAP_V2 feature bit.

Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-06 11:21:33 +01:00
Louis Peens
29c691347e nfp: flower: add infrastructure for pre_tun rework
The previous implementation of using a pre_tun_table for decap has
some limitations, causing flows to end up unoffloaded when in fact
we are able to offload them. This is because the pre_tun_table does
not have enough matching resolution. The next step is to instead make
use of the neighbour table which already exists for the encap direction.
This patch prepares for this by:

- Moving nfp_tun_neigh/_v6 to main.h.
- Creating two new "wrapping" structures, one to keep track of neighbour
  entries (previously they were send-and-forget), and another to keep
  track of pre_tun flows.
- Create a new list in nfp_flower_priv to keep track of pre_tunnel flows
- Create a new table in nfp_flower_priv to keep track of next neighbour
  entries
- Initialising and destroying these new list/tables
- Extending nfp_fl_payload->pre_tun_rule to save more information for
  future use.

Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-06 11:21:33 +01:00
David S. Miller
76a8426959 Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:

====================
100GbE Intel Wired LAN Driver Updates 2022-05-05
This series contains updates to ice driver only.

Wan Jiabing converts an open coded min selection to min_t().

Maciej commonizes on a single find VSI function and removes the
duplicated implementation.

Wojciech adjusts the return value when exceeding ICE_MAX_CHAIN_WORDS to,
a more appropriate, -ENOSPC and allows for the error to be propagated.

Michal adds support for ndo_get_devlink_port().

Jake does some cleanup related to virtualization code. Mainly involving
function header comments and wording changes. NULL checks are added to
ice_get_vf_vsi() calls in order to prevent static analysis tools from
complaining that a NULL value could be dereferenced.
---
v2: Dropped patch 1: "ice: Add support for classid based queue selection"
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-06 10:50:05 +01:00
Leon Romanovsky
3ef535ecce net/mlx5e: Use XFRM state direction instead of flags
Convert mlx5 driver to use XFRM state direction.

Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2022-05-06 08:35:09 +02:00
Leon Romanovsky
55e2f83afb netdevsim: rely on XFRM state direction instead of flags
Make sure that netdevsim relies on direction and not on flags.

Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2022-05-06 08:34:33 +02:00
Leon Romanovsky
0c05ab78e3 ixgbe: propagate XFRM offload state direction instead of flags
Convert the ixgbe driver to rely on XFRM offload state direction instead
of flags bits that were not checked at all.

Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2022-05-06 08:32:52 +02:00
Manikanta Pubbisetty
22cc687326 ath11k: Fix RX de-fragmentation issue on WCN6750
The offset of REO register where the RX fragment destination ring
is configured is different in WCN6750 as compared to WCN6855.
Due to this differnce in offsets, on WCN6750, fragment destination
ring will be configured incorrectly, leading to RX fragments not
getting delivered to the driver. Fix this by defining HW specific
offsets for the REO MISC CTL register.

Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00192-QCAHKSWPL_SILICONZ-1

Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220504083900.31513-1-quic_mpubbise@quicinc.com
2022-05-06 09:20:12 +03:00
Robert Marko
f2a7064a78 ath10k: support bus and device specific API 1 BDF selection
Some ath10k IPQ40xx devices like the MikroTik hAP ac2 and ac3 require the
BDF-s to be extracted from the device storage instead of shipping packaged
API 2 BDF-s.

This is required as MikroTik has started shipping boards that require BDF-s
to be updated, as otherwise their WLAN performance really suffers.
This is however impossible as the devices that require this are release
under the same revision and its not possible to differentiate them from
devices using the older BDF-s.

In OpenWrt we are extracting the calibration data during runtime and we are
able to extract the BDF-s in the same manner, however we cannot package the
BDF-s to API 2 format on the fly and can only use API 1 to provide BDF-s on
the fly.
This is an issue as the ath10k driver explicitly looks only for the
board.bin file and not for something like board-bus-device.bin like it does
for pre-cal data.
Due to this we have no way of providing correct BDF-s on the fly, so lets
extend the ath10k driver to first look for BDF-s in the
board-bus-device.bin format, for example: board-ahb-a800000.wifi.bin
If that fails, look for the default board file name as defined previously.

Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20211009221711.2315352-1-robimarko@gmail.com
2022-05-06 09:19:45 +03:00
Kalle Valo
d9e441855c ath10k: mac: fix too long lines
checkpatch warns:

drivers/net/wireless/ath/ath10k/mac.c:2696: line length of 92 exceeds 90 columns
drivers/net/wireless/ath/ath10k/mac.c:6942: line length of 94 exceeds 90 columns
drivers/net/wireless/ath/ath10k/mac.c:6948: line length of 91 exceeds 90 columns

These were introduced by commit 046d2e7c50 ("mac80211: prepare sta handling
for MLO support").

Compile tested only.

Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220503060415.24499-2-kvalo@kernel.org
2022-05-06 09:16:56 +03:00
Kalle Valo
80c5075f39 ath11k: mac: fix too long line
checkpatch warns:

drivers/net/wireless/ath/ath11k/mac.c:7760: line length of 91 exceeds 90 columns

This was introduced by commit 046d2e7c50 ("mac80211: prepare sta handling for
MLO support").

Compile tested only.

Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220503060415.24499-1-kvalo@kernel.org
2022-05-06 09:16:56 +03:00
H. Nikolaus Schaller
454744754c wl1251: dynamically allocate memory used for DMA
With introduction of vmap'ed stacks, stack parameters can no
longer be used for DMA and now leads to kernel panic.

It happens at several places for the wl1251 (e.g. when
accessed through SDIO) making it unuseable on e.g. the
OpenPandora.

We solve this by allocating temporary buffers or use wl1251_read32().

Tested on v5.18-rc5 with OpenPandora.

Fixes: a1c510d0ad ("ARM: implement support for vmap'ed stacks")
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/1676021ae8b6d7aada0b1806fed99b1b8359bdc4.1651495112.git.hns@goldelico.com
2022-05-06 09:11:33 +03:00
Jakub Kicinski
193eb523d2 qtnfmac: switch to netif_napi_add_weight()
qtnfmac chooses its own magic NAPI weight so switch to the new
API created for those who don't use NAPI_POLL_WEIGHT.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220504163316.549648-4-kuba@kernel.org
2022-05-06 08:47:52 +03:00
Jakub Kicinski
3ed27b602c mt76: switch to netif_napi_add_tx()
Switch to the new API not requiring passing in NAPI_POLL_WEIGHT.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220504163316.549648-3-kuba@kernel.org
2022-05-06 08:47:52 +03:00
Jakub Kicinski
f1c5d4ded7 wil6210: switch to netif_napi_add_tx()
Switch to the new API not requiring passing in NAPI_POLL_WEIGHT.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220504163316.549648-2-kuba@kernel.org
2022-05-06 08:47:51 +03:00
Vladimir Oltean
93a8417088 net: mscc: ocelot: avoid corrupting hardware counters when moving VCAP filters
Given the following order of operations:

(1) we add filter A using tc-flower
(2) we send a packet that matches it
(3) we read the filter's statistics to find a hit count of 1
(4) we add a second filter B with a higher preference than A, and A
    moves one position to the right to make room in the TCAM for it
(5) we send another packet, and this matches the second filter B
(6) we read the filter statistics again.

When this happens, the hit count of filter A is 2 and of filter B is 1,
despite a single packet having matched each filter.

Furthermore, in an alternate history, reading the filter stats a second
time between steps (3) and (4) makes the hit count of filter A remain at
1 after step (6), as expected.

The reason why this happens has to do with the filter->stats.pkts field,
which is written to hardware through the call path below:

               vcap_entry_set
               /      |      \
              /       |       \
             /        |        \
            /         |         \
es0_entry_set   is1_entry_set   is2_entry_set
            \         |         /
             \        |        /
              \       |       /
        vcap_data_set(data.counter, ...)

The primary role of filter->stats.pkts is to transport the filter hit
counters from the last readout all the way from vcap_entry_get() ->
ocelot_vcap_filter_stats_update() -> ocelot_cls_flower_stats().
The reason why vcap_entry_set() writes it to hardware is so that the
counters (saturating and having a limited bit width) are cleared
after each user space readout.

The writing of filter->stats.pkts to hardware during the TCAM entry
movement procedure is an unintentional consequence of the code design,
because the hit count isn't up to date at this point.

So at step (4), when filter A is moved by ocelot_vcap_filter_add() to
make room for filter B, the hardware hit count is 0 (no packet matched
on it in the meantime), but filter->stats.pkts is 1, because the last
readout saw the earlier packet. The movement procedure programs the old
hit count back to hardware, so this creates the impression to user space
that more packets have been matched than they really were.

The bug can be seen when running the gact_drop_and_ok_test() from the
tc_actions.sh selftest.

Fix the issue by reading back the hit count to tmp->stats.pkts before
migrating the VCAP filter. Sure, this is a best-effort technique, since
the packets that hit the rule between vcap_entry_get() and
vcap_entry_set() won't be counted, but at least it allows the counters
to be reliably used for selftests where the traffic is under control.

The vcap_entry_get() name is a bit unintuitive, but it only reads back
the counter portion of the TCAM entry, not the entire entry.

The index from which we retrieve the counter is also a bit unintuitive
(i - 1 during add, i + 1 during del), but this is the way in which TCAM
entry movement works. The "entry index" isn't a stored integer for a
TCAM filter, instead it is dynamically computed by
ocelot_vcap_block_get_filter_index() based on the entry's position in
the &block->rules list. That position (as well as block->count) is
automatically updated by ocelot_vcap_filter_add_to_block() on add, and
by ocelot_vcap_block_remove_filter() on del. So "i" is the new filter
index, and "i - 1" or "i + 1" respectively are the old addresses of that
TCAM entry (we only support installing/deleting one filter at a time).

Fixes: b596229448 ("net: mscc: ocelot: Add support for tcam")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-05 19:15:17 -07:00
Vladimir Oltean
477d2b9162 net: mscc: ocelot: restrict tc-trap actions to VCAP IS2 lookup 0
Once the CPU port was added to the destination port mask of a packet, it
can never be cleared, so even packets marked as dropped by the MASK_MODE
of a VCAP IS2 filter will still reach it. This is why we need the
OCELOT_POLICER_DISCARD to "kill dropped packets dead" and make software
stop seeing them.

We disallow policer rules from being put on any other chain than the one
for the first lookup, but we don't do this for "drop" rules, although we
should. This change is merely ascertaining that the rules dont't
(completely) work and letting the user know.

The blamed commit is the one that introduced the multi-chain architecture
in ocelot. Prior to that, we should have always offloaded the filters to
VCAP IS2 lookup 0, where they did work.

Fixes: 1397a2eb52 ("net: mscc: ocelot: create TCAM skeleton from tc filter chains")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-05 19:15:16 -07:00
Vladimir Oltean
6741e11880 net: mscc: ocelot: fix VCAP IS2 filters matching on both lookups
The VCAP IS2 TCAM is looked up twice per packet, and each filter can be
configured to only match during the first, second lookup, or both, or
none.

The blamed commit wrote the code for making VCAP IS2 filters match only
on the given lookup. But right below that code, there was another line
that explicitly made the lookup a "don't care", and this is overwriting
the lookup we've selected. So the code had no effect.

Some of the more noticeable effects of having filters match on both
lookups:

- in "tc -s filter show dev swp0 ingress", we see each packet matching a
  VCAP IS2 filter counted twice. This throws off scripts such as
  tools/testing/selftests/net/forwarding/tc_actions.sh and makes them
  fail.

- a "tc-drop" action offloaded to VCAP IS2 needs a policer as well,
  because once the CPU port becomes a member of the destination port
  mask of a packet, nothing removes it, not even a PERMIT/DENY mask mode
  with a port mask of 0. But VCAP IS2 rules with the POLICE_ENA bit in
  the action vector can only appear in the first lookup. What happens
  when a filter matches both lookups is that the action vector is
  combined, and this makes the POLICE_ENA bit ineffective, since the
  last lookup in which it has appeared is the second one. In other
  words, "tc-drop" actions do not drop packets for the CPU port, dropped
  packets are still seen by software unless there was an FDB entry that
  directed those packets to some other place different from the CPU.

The last bit used to work, because in the initial commit b596229448
("net: mscc: ocelot: Add support for tcam"), we were writing the FIRST
field of the VCAP IS2 half key with a 1, not with a "don't care".
The change to "don't care" was made inadvertently by me in commit
c1c3993edb ("net: mscc: ocelot: generalize existing code for VCAP"),
which I just realized, and which needs a separate fix from this one,
for "stable" kernels that lack the commit blamed below.

Fixes: 226e9cd82a ("net: mscc: ocelot: only install TCAM entries into a specific lookup and PAG")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-05 19:15:16 -07:00
Vladimir Oltean
16bbebd356 net: mscc: ocelot: fix last VCAP IS1/IS2 filter persisting in hardware when deleted
ocelot_vcap_filter_del() works by moving the next filters over the
current one, and then deleting the last filter by calling vcap_entry_set()
with a del_filter which was specially created by memsetting its memory
to zeroes. vcap_entry_set() then programs this to the TCAM and action
RAM via the cache registers.

The problem is that vcap_entry_set() is a dispatch function which looks
at del_filter->block_id. But since del_filter is zeroized memory, the
block_id is 0, or otherwise said, VCAP_ES0. So practically, what we do
is delete the entry at the same TCAM index from VCAP ES0 instead of IS1
or IS2.

The code was not always like this. vcap_entry_set() used to simply be
is2_entry_set(), and then, the logic used to work.

Restore the functionality by populating the block_id of the del_filter
based on the VCAP block of the filter that we're deleting. This makes
vcap_entry_set() know what to do.

Fixes: 1397a2eb52 ("net: mscc: ocelot: create TCAM skeleton from tc filter chains")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-05 19:15:15 -07:00
Vladimir Oltean
e1846cff2f net: mscc: ocelot: mark traps with a bool instead of keeping them in a list
Since the blamed commit, VCAP filters can appear on more than one list.
If their action is "trap", they are chained on ocelot->traps via
filter->trap_list. This is in addition to their normal placement on the
VCAP block->rules list head.

Therefore, when we free a VCAP filter, we must remove it from all lists
it is a member of, including ocelot->traps.

There are at least 2 bugs which are direct consequences of this design
decision.

First is the incorrect usage of list_empty(), meant to denote whether
"filter" is chained into ocelot->traps via filter->trap_list.
This does not do the correct thing, because list_empty() checks whether
"head->next == head", but in our case, head->next == head->prev == NULL.
So we dereference NULL pointers and die when we call list_del().

Second is the fact that not all places that should remove the filter
from ocelot->traps do so. One example is ocelot_vcap_block_remove_filter(),
which is where we have the main kfree(filter). By keeping freed filters
in ocelot->traps we end up in a use-after-free in
felix_update_trapping_destinations().

Attempting to fix all the buggy patterns is a whack-a-mole game which
makes the driver unmaintainable. Actually this is what the previous
patch version attempted to do:
https://patchwork.kernel.org/project/netdevbpf/patch/20220503115728.834457-3-vladimir.oltean@nxp.com/

but it introduced another set of bugs, because there are other places in
which create VCAP filters, not just ocelot_vcap_filter_create():

- ocelot_trap_add()
- felix_tag_8021q_vlan_add_rx()
- felix_tag_8021q_vlan_add_tx()

Relying on the convention that all those code paths must call
INIT_LIST_HEAD(&filter->trap_list) is not going to scale.

So let's do what should have been done in the first place and keep a
bool in struct ocelot_vcap_filter which denotes whether we are looking
at a trapping rule or not. Iterating now happens over the main VCAP IS2
block->rules. The advantage is that we no longer risk having stale
references to a freed filter, since it is only present in that list.

Fixes: e42bd4ed09 ("net: mscc: ocelot: keep traps in a list")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-05 19:15:14 -07:00
Fabio Estevam
15f03ffe4b net: phy: micrel: Pass .probe for KS8737
Since commit f1131b9c23 ("net: phy: micrel: use
kszphy_suspend()/kszphy_resume for irq aware devices") the kszphy_suspend/
resume hooks are used.

These functions require the probe function to be called so that
priv can be allocated.

Otherwise, a NULL pointer dereference happens inside
kszphy_config_reset().

Cc: stable@vger.kernel.org
Fixes: f1131b9c23 ("net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices")
Reported-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220504143104.1286960-2-festevam@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-05 17:02:02 -07:00
Fabio Estevam
e333eed63a net: phy: micrel: Do not use kszphy_suspend/resume for KSZ8061
Since commit f1131b9c23 ("net: phy: micrel: use
kszphy_suspend()/kszphy_resume for irq aware devices") the following
NULL pointer dereference is observed on a board with KSZ8061:

 # udhcpc -i eth0
udhcpc: started, v1.35.0
8<--- cut here ---
Unable to handle kernel NULL pointer dereference at virtual address 00000008
pgd = f73cef4e
[00000008] *pgd=00000000
Internal error: Oops: 5 [#1] SMP ARM
Modules linked in:
CPU: 0 PID: 196 Comm: ifconfig Not tainted 5.15.37-dirty #94
Hardware name: Freescale i.MX6 SoloX (Device Tree)
PC is at kszphy_config_reset+0x10/0x114
LR is at kszphy_resume+0x24/0x64
...

The KSZ8061 phy_driver structure does not have the .probe/..driver_data
fields, which means that priv is not allocated.

This causes the NULL pointer dereference inside kszphy_config_reset().

Fix the problem by using the generic suspend/resume functions as before.

Another alternative would be to provide the .probe and .driver_data
information into the structure, but to be on the safe side, let's
just restore Ethernet functionality by using the generic suspend/resume.

Cc: stable@vger.kernel.org
Fixes: f1131b9c23 ("net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220504143104.1286960-1-festevam@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-05 17:02:02 -07:00
Jakub Kicinski
8d602e1a13 net: move snowflake callers to netif_napi_add_tx_weight()
Make the drivers with custom tx napi weight call netif_napi_add_tx_weight().

Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220504163725.550782-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-05 15:54:18 -07:00
Jakub Kicinski
16d083e28f net: switch to netif_napi_add_tx()
Switch net callers to the new API not requiring
the NAPI_POLL_WEIGHT argument.

Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Acked-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Link: https://lore.kernel.org/r/20220504163725.550782-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-05 15:54:12 -07:00
Jakub Kicinski
fd49f8e61c jme: remove an unnecessary indirection
Remove a define which looks like a OS abstraction layer
and makes spatch conversions on this driver problematic.

Link: https://lore.kernel.org/r/20220504163939.551231-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-05 15:53:28 -07:00
Christophe Leroy
6bff3ffcf6 net: ethernet: Prepare cleanup of powerpc's asm/prom.h
powerpc's asm/prom.h includes some headers that it doesn't
need itself.

In order to clean powerpc's asm/prom.h up in a further step,
first clean all files that include asm/prom.h

Some files don't need asm/prom.h at all. For those ones,
just remove inclusion of asm/prom.h

Some files don't need any of the items provided by asm/prom.h,
but need some of the headers included by asm/prom.h. For those
ones, add the needed headers that are brought by asm/prom.h at
the moment and remove asm/prom.h

Some files really need asm/prom.h but also need some of the
headers included by asm/prom.h. For those one, leave asm/prom.h
but also add the needed headers so that they can be removed
from asm/prom.h in a later step.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/09a13d592d628de95d30943e59b2170af5b48110.1651663857.git.christophe.leroy@csgroup.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-05 15:53:02 -07:00
Christophe Leroy
d9ccf770c7 sungem: Prepare cleanup of powerpc's asm/prom.h
powerpc's <asm/prom.h> includes some headers that it doesn't
need itself.

In order to clean powerpc's <asm/prom.h> up in a further step,
first clean all files that include <asm/prom.h>

sungem_phy.c doesn't use any object provided by <asm/prom.h>.

But removing inclusion of <asm/prom.h> leads to the following
errors:

  CC      drivers/net/sungem_phy.o
drivers/net/sungem_phy.c: In function 'bcm5421_init':
drivers/net/sungem_phy.c:448:42: error: implicit declaration of function 'of_get_parent'; did you mean 'dget_parent'? [-Werror=implicit-function-declaration]
  448 |                 struct device_node *np = of_get_parent(phy->platform_data);
      |                                          ^~~~~~~~~~~~~
      |                                          dget_parent
drivers/net/sungem_phy.c:448:42: warning: initialization of 'struct device_node *' from 'int' makes pointer from integer without a cast [-Wint-conversion]
drivers/net/sungem_phy.c:450:35: error: implicit declaration of function 'of_get_property' [-Werror=implicit-function-declaration]
  450 |                 if (np == NULL || of_get_property(np, "no-autolowpower", NULL))
      |                                   ^~~~~~~~~~~~~~~

Remove <asm/prom.h> from included headers but add <linux/of.h> to
handle the above.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/f7a7fab3ec5edf803d934fca04df22631c2b449d.1651662885.git.christophe.leroy@csgroup.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-05 15:52:27 -07:00
Jakub Kicinski
c4a67a21a6 Revert "Merge branch 'mlxsw-line-card-model'"
This reverts commit 5e927a9f4b, reversing
changes made to cfc1d91a7d.

The discussion is still ongoing so let's remove the uAPI
until the discussion settles.

Link: https://lore.kernel.org/all/20220425090021.32e9a98f@kernel.org/
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20220504154037.539442-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-05 15:47:23 -07:00
Jakub Kicinski
c8227d568d Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
tools/testing/selftests/net/forwarding/Makefile
  f62c5acc80 ("selftests/net/forwarding: add missing tests to Makefile")
  50fe062c80 ("selftests: forwarding: new test, verify host mdb entries")
https://lore.kernel.org/all/20220502111539.0b7e4621@canb.auug.org.au/

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-05 13:03:18 -07:00
Jacob Keller
4eaf1797bc ice: remove period on argument description in ice_for_each_vf
The ice_for_each_vf macros have comments describing the implementation. One
of the arguments has a period on the end, which is not our typical style.
Remove the unnecessary period.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-05-05 11:28:36 -07:00