Commit graph

112,392 commits

Author SHA1 Message Date
Chen Yu
91ec779247 e1000e: Print PHY register address when MDI read/write fails
There is occasional suspend error from e1000e which blocks the
system from further suspending. And the issue was found on
a WhiskeyLake-U platform with I219-V:

[   20.078957] PM: pci_pm_suspend(): e1000e_pm_suspend+0x0/0x780 [e1000e] returns -2
[   20.078970] PM: dpm_run_callback(): pci_pm_suspend+0x0/0x170 returns -2
[   20.078974] e1000e 0000:00:1f.6: PM: pci_pm_suspend+0x0/0x170 returned -2 after 371012 usecs
[   20.078978] e1000e 0000:00:1f.6: PM: failed to suspend async: error -2

According to the code flow, this might be caused by broken MDI read/write
to PHY registers. However currently the code does not tell us which
register is broken. Thus enhance the debug information to print the
offender PHY register. So the next the issue is reproduced, this
information could be used for narrow down.

Acked-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reported-by: Todd Brandt <todd.e.brandt@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20220308172030.451566-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-09 19:53:03 -08:00
Oleksij Rempel
e18058ea99 net: dsa: microchip: ksz9477: implement MTU configuration
This chips supports two ways to configure max MTU size:
- by setting SW_LEGAL_PACKET_DISABLE bit: if this bit is 0 allowed packed size
  will be between 64 and bytes 1518. If this bit is 1, it will accept
  packets up to 2000 bytes.
- by setting SW_JUMBO_PACKET bit. If this bit is set, the chip will
  ignore SW_LEGAL_PACKET_DISABLE value and use REG_SW_MTU__2 register to
  configure MTU size.

Current driver has disabled SW_JUMBO_PACKET bit and activates
SW_LEGAL_PACKET_DISABLE. So the switch will pass all packets up to 2000 without
any way to configure it.

By providing port_change_mtu we are switch to SW_JUMBO_PACKET way and will
be able to configure MTU up to ~9000.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20220308135857.1119028-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-09 19:47:18 -08:00
Guo Zhengkui
e58bc86463 drivers: vxlan: fix returnvar.cocci warning
Fix the following coccicheck warning:

drivers/net/vxlan/vxlan_core.c:2995:5-8:
Unneeded variable: "ret". Return "0" on line 3004.

Fixes: f9c4bb0b24 ("vxlan: vni filtering support on collect metadata device")
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Acked-by: Roopa Prabhu <roopa@nvidia.com>
Link: https://lore.kernel.org/r/20220308134321.29862-1-guozhengkui@vivo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-09 19:40:36 -08:00
Yevgeny Kliteynik
6862c787c7 net/mlx5: DR, Add support for ConnectX-7 steering
Add support for a new SW format version that is implemented by
ConnectX-7.

Except for several differences, the STEv2 is identical to STEv1, so for
most callbacks the STEv2 context struct will call STEv1 functions.

Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-03-09 13:33:04 -08:00
Yevgeny Kliteynik
638a07f109 net/mlx5: DR, Refactor ste_ctx handling for STE v0/1
As preparation for supporting ConnectX-7, this patches changes handling
of ste_ctx handling for existing STE v0 and V1:
 - each context is now a static struct, and it has a corresponding getter
 - v0 and v1 were extended to contain the fields that are required for
   integrating STEv2.

Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-03-09 13:33:04 -08:00
Yevgeny Kliteynik
75a3926ca6 net/mlx5: DR, Rename action modify fields to reflect naming in HW spec
As preparation for supporting ConnectX-7, rename action modify fields
steering registers from arbitrary names to the names that reflect the
corresponding naming and location of the steering registers in HW.
These registers mapping has changed in ConnectX-7, so the renaming allows
to keep track of their mapping better.

Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-03-09 13:33:04 -08:00
Yevgeny Kliteynik
bdc3ab5795 net/mlx5: DR, Fix handling of different actions on the same STE in STEv1
Fix handling of various conditions in set_actions_rx/tx that check
whether different actions can be on the same STE.

Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-03-09 13:33:04 -08:00
Yevgeny Kliteynik
11659ef8d2 net/mlx5: DR, Remove unneeded comments
Remove two comments that were erroneously left in the code.

Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-03-09 13:33:03 -08:00
Yevgeny Kliteynik
5c422bfad2 net/mlx5: DR, Add support for matching on Internet Header Length (IHL)
Add support for matching on new field - Internet Header Length (IHL).

Signed-off-by: Muhammad Sammar <muhammads@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-03-09 13:33:03 -08:00
Shun Hao
aa818fbf8f net/mlx5: DR, Align mlx5dv_dr API vport action with FW behavior
This aligns the behavior with FW when creating an FDB rule with wire
vport destination but no source port matching. Until now such rules
would fail on internal DR RX rule creation since the source and
destination are the wire vport.
The new behavior is the same as done on FW steering, if destination is
wire, we will create both TX and RX rules, but the RX packet coming from
wire will be dropped due to loopback not supported.

Signed-off-by: Shun Hao <shunh@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-03-09 13:33:03 -08:00
Moshe Shemesh
32071187e9 net/mlx5: Add debugfs counters for page commands failures
Add the following new debugfs counters for debug and verbosity:
fw_pages_alloc_failed - number of pages FW requested but driver failed
to allocate.
give_pages_dropped - number of pages given to FW, but command give pages
failed by FW.
reclaim_pages_discard - number of pages which were about to reclaim back
and FW failed the command.

Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-03-09 13:33:02 -08:00
Moshe Shemesh
4e05cbf05c net/mlx5: Add pages debugfs
Add pages debugfs to expose the following counters for debuggability:
fw_pages_total - How many pages were given to FW and not returned yet.
vfs_pages - For SRIOV, how many pages were given to FW for virtual
functions usage.
host_pf_pages - For ECPF, how many pages were given to FW for external
hosts physical functions usage.

Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-03-09 13:33:02 -08:00
Moshe Shemesh
66771a1c72 net/mlx5: Move debugfs entries to separate struct
Move the debugfs entry pointers under priv to their own struct.
Add get function for device debugfs root.

Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-03-09 13:33:02 -08:00
Moshe Shemesh
8d564292a1 net/mlx5: Remove redundant error on reclaim pages
If reclaim pages was triggered by FW event and FW failed the command,
the driver should ignore as FW is aware and will handle it.

The downstream patch will add a debugfs counter on this flow for
debuggability.

Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-03-09 13:33:01 -08:00
Moshe Shemesh
113fdaaad7 net/mlx5: Remove redundant error on give pages
If give pages was triggered by FW event and FW failed the command,
the driver should ignore as FW is aware and will handle it.

The downstream patch will add a debugfs counter on this flow for
debuggability.

Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-03-09 13:33:01 -08:00
Moshe Shemesh
4dac2f10ad net/mlx5: Remove redundant notify fail on give pages
If give pages command failed by FW, there is no need to notify the FW on
the failure. FW is aware and will handle it.

Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-03-09 13:33:01 -08:00
Moshe Shemesh
34f46ae0d4 net/mlx5: Add command failures data to debugfs
Add new counters to command interface debugfs to count command failures.
The following counters added:
total_failed - number of times command failed (any kind of failure).
failed_mbox_status - number of times command failed on bad status
returned by FW.

In addition, add data about last command failure to command interface
debugfs:
last_failed_errno - last command failed returned errno.
last_failed_mbox_status - last bad status returned by FW.

Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-03-09 13:33:00 -08:00
Dan Carpenter
371c2b349d net/mlx5e: TC, Fix use after free in mlx5e_clone_flow_attr_for_post_act()
This returns freed memory leading to a use after free.  It's supposed to
return NULL.

Fixes: 8300f22526 ("net/mlx5e: Create new flow attr for multi table actions")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-03-09 13:33:00 -08:00
Ben Ben-Ishay
99a2b9be07 net/mlx5e: SHAMPO, reduce TIR indication
SHAMPO is an RQ / WQ feature, an indication was added to the TIR in the
first place to enforce suitability between connected TIR and RQ, this
enforcement does not exist in current the Firmware implementation and was
redundant in the first place.

Fixes: 83439f3c37 ("net/mlx5e: Add HW-GRO offload")
Signed-off-by: Ben Ben-Ishay <benishay@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-03-09 11:39:35 -08:00
Roi Dayan
ad11c4f1d8 net/mlx5e: Lag, Only handle events from highest priority multipath entry
There could be multiple multipath entries but changing the port affinity
for each one doesn't make much sense and there should be a default one.
So only track the entry with lowest priority value.
The commit doesn't affect existing users with a single entry.

Fixes: 544fe7c2e6 ("net/mlx5e: Activate HW multipath and handle port affinity based on FIB events")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-03-09 11:39:35 -08:00
Dima Chumak
39bab83b11 net/mlx5: Fix offloading with ESWITCH_IPV4_TTL_MODIFY_ENABLE
Only prio 1 is supported for nic mode when there is no ignore flow level
support in firmware. But for switchdev mode, which supports fixed number
of statically pre-allocated prios, this restriction is not relevant so
it can be relaxed.

Fixes: d671e109bd ("net/mlx5: Fix tc max supported prio for nic mode")
Signed-off-by: Dima Chumak <dchumak@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-03-09 11:39:35 -08:00
Moshe Shemesh
063bd35559 net/mlx5: Fix a race on command flush flow
Fix a refcount use after free warning due to a race on command entry.
Such race occurs when one of the commands releases its last refcount and
frees its index and entry while another process running command flush
flow takes refcount to this command entry. The process which handles
commands flush may see this command as needed to be flushed if the other
process released its refcount but didn't release the index yet. Fix it
by adding the needed spin lock.

It fixes the following warning trace:

refcount_t: addition on 0; use-after-free.
WARNING: CPU: 11 PID: 540311 at lib/refcount.c:25 refcount_warn_saturate+0x80/0xe0
...
RIP: 0010:refcount_warn_saturate+0x80/0xe0
...
Call Trace:
 <TASK>
 mlx5_cmd_trigger_completions+0x293/0x340 [mlx5_core]
 mlx5_cmd_flush+0x3a/0xf0 [mlx5_core]
 enter_error_state+0x44/0x80 [mlx5_core]
 mlx5_fw_fatal_reporter_err_work+0x37/0xe0 [mlx5_core]
 process_one_work+0x1be/0x390
 worker_thread+0x4d/0x3d0
 ? rescuer_thread+0x350/0x350
 kthread+0x141/0x160
 ? set_kthread_struct+0x40/0x40
 ret_from_fork+0x1f/0x30
 </TASK>

Fixes: 50b2412b7e ("net/mlx5: Avoid possible free of command entry while timeout comp handler")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-03-09 11:39:34 -08:00
Amritha Nambiar
02ddec1986 ice: Add support for outer dest MAC for ADQ tunnels
TC flower does not support matching on user specified
outer MAC address for tunnels. For ADQ tunnels, the driver
adds outer destination MAC address as lower netdev's
active unicast MAC address to filter out packets with
unrelated MAC address being delivered to ADQ VSIs.

Example:
- create tunnel device
ip l add $VXLAN_DEV type vxlan id $VXLAN_VNI dstport $VXLAN_PORT \
dev $PF
- add TC filter (in ADQ mode)

$tc filter add dev $VXLAN_DEV protocol ip parent ffff: flower \
 dst_ip $INNER_DST_IP ip_proto tcp dst_port $INNER_DST_PORT \
 enc_key_id $VXLAN_VNI hw_tc $ADQ_TC

Note: Filters with wild-card tunnel ID (when user does not
specify tunnel key) are also supported.

Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com>
Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-03-09 10:05:32 -08:00
Maciej Fijalkowski
457a02f03e ice: avoid XDP checks in ice_clean_tx_irq()
Commit 9610bd988d ("ice: optimize XDP_TX workloads") introduced Tx IRQ
cleaning routine dedicated for XDP rings. Currently it is impossible to
call ice_clean_tx_irq() against XDP ring, so it is safe to drop
ice_ring_is_xdp() calls in there.

Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>  (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-03-09 10:05:27 -08:00
Jonathan Toppins
ad24d9ebc4 ice: change "can't set link" message to dbg level
In the case where the link is owned by manageability, the firmware is
not allowed to set the link state, so an error code is returned.
This however is non-fatal and there is nothing the operator can do,
so instead of confusing the operator with messages they can do nothing
about hide this message behind the debug log level.

Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-03-09 08:02:58 -08:00
Marcin Szycik
c8ff29b587 ice: Add slow path offload stats on port representor in switchdev
Implement callbacks to check for stats and fetch port representor stats.
Stats are taken from RX/TX ring corresponding to port representor and show
the number of bytes/packets that were not offloaded.

To see slow path stats run:
ifstat -x cpu_hits -a

Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-03-09 08:02:58 -08:00
Martyna Szapar-Mudlaw
34a897758e ice: Add support for inner etype in switchdev
Enable support for adding TC rules that filter on the inner
EtherType field of tunneled packet headers.

Signed-off-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@intel.com>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-03-09 08:02:58 -08:00
Colin Ian King
44d445c023 ath9k: make array voice_priority static const
Don't populate the read-only array voice_priority on the stack but
instead make it static const. Also makes the object code a little
smaller.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220222121749.87513-1-colin.i.king@gmail.com
2022-03-09 17:09:07 +02:00
Gustavo A. R. Silva
0dff6f05a9 ath6kl: wmi: Replace one-element array with flexible-array member in struct wmi_aplist_event
Replace one-element array with flexible-array member in struct
wmi_aplist_event.

Also, make use of the struct_size() helper and remove unneeded variable
ap_info_entry_size.

This issue was found with the help of Coccinelle and audited and fixed,
manually.

Link: https://www.kernel.org/doc/html/v5.16/process/deprecated.html#zero-length-and-one-element-arrays
Link: https://github.com/KSPP/linux/issues/79
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/1b7889828f23763c034c1558cbab9c8e2066053e.1645736204.git.gustavoars@kernel.org
2022-03-09 17:07:44 +02:00
Gustavo A. R. Silva
5140df50e6 ath6kl: wmi: Replace one-element array with flexible-array member in struct wmi_disconnect_event
Replace one-element array with flexible-array member in struct
wmi_disconnect_event.

This issue was found with the help of Coccinelle and audited and fixed,
manually.

Link: https://www.kernel.org/doc/html/v5.16/process/deprecated.html#zero-length-and-one-element-arrays
Link: https://github.com/KSPP/linux/issues/79
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/e9957dc53ae48c2f39ae57b0157a67d844b5bc20.1645736204.git.gustavoars@kernel.org
2022-03-09 17:07:23 +02:00
Gustavo A. R. Silva
dfb0203939 ath6kl: wmi: Replace one-element array with flexible-array member in struct wmi_connect_event
Replace one-element array with flexible-array member in struct
wmi_connect_event.

This issue was found with the help of Coccinelle and audited and fixed,
manually.

Link: https://www.kernel.org/doc/html/v5.16/process/deprecated.html#zero-length-and-one-element-arrays
Link: https://github.com/KSPP/linux/issues/79
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/290a0cb7bddd813a6a96a59853880e66917aa03d.1645736204.git.gustavoars@kernel.org
2022-03-09 17:07:02 +02:00
Gustavo A. R. Silva
3c5e6994ee ath6kl: wmi: Replace one-element array with flexible-array member in struct wmi_channel_list_reply
Replace one-element array with flexible-array member in struct
wmi_channel_list_reply.

This issue was found with the help of Coccinelle and audited and fixed,
manually.

Link: https://www.kernel.org/doc/html/v5.16/process/deprecated.html#zero-length-and-one-element-arrays
Link: https://github.com/KSPP/linux/issues/79
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/f3f9728a1dfc3767340f25a963be374e2ef5d8ad.1645736204.git.gustavoars@kernel.org
2022-03-09 17:06:41 +02:00
Gustavo A. R. Silva
56f1257fdc ath6kl: wmi: Replace one-element array with flexible-array member in struct wmi_start_scan_cmd
Replace one-element array with flexible-array member in struct
wmi_start_scan_cmd. Also, make use of the struct_size() helper.

This issue was found with the help of Coccinelle and audited and fixed,
manually.

Link: https://www.kernel.org/doc/html/v5.16/process/deprecated.html#zero-length-and-one-element-arrays
Link: https://github.com/KSPP/linux/issues/79
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/8b33c6d86a6bd40b5688cf118b4b35850db8d8c7.1645736204.git.gustavoars@kernel.org
2022-03-09 17:06:20 +02:00
Gustavo A. R. Silva
324edddf25 ath6kl: wmi: Replace one-element array with flexible-array member in struct wmi_begin_scan_cmd
Replace one-element array with flexible-array member in struct
wmi_begin_scan_cmd. Also, make use of the struct_size() helper.

This issue was found with the help of Coccinelle and audited and fixed,
manually.

Link: https://www.kernel.org/doc/html/v5.16/process/deprecated.html#zero-length-and-one-element-arrays
Link: https://github.com/KSPP/linux/issues/79
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/1ef801ea24475501fa0f296cb5435a440135206e.1645736204.git.gustavoars@kernel.org
2022-03-09 17:05:58 +02:00
Horatiu Vultur
0dbdf819f4 net: lan966x: Add spinlock for frame transmission from CPU.
The registers used to inject a frame to one of the ports is shared
between all the net devices. Therefore, there can be race conditions for
accessing the registers when two processes send frames at the same time
on different ports.

To fix this, add a spinlock around the function
'lan966x_port_ifh_xmit()'.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-09 14:59:14 +00:00
Changcheng Deng
2c9ec169f7 net: ethernet: sun: use min_t() to make code cleaner
Use min_t() in order to make code cleaner.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-09 14:58:06 +00:00
Miaoqian Lin
c9ffa3e2bc net: marvell: prestera: Add missing of_node_put() in prestera_switch_set_base_mac_addr
This node pointer is returned by of_find_compatible_node() with
refcount incremented. Calling of_node_put() to aovid the refcount leak.

Fixes: 501ef3066c ("net: marvell: prestera: Add driver for Prestera family ASIC devices")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-09 12:16:32 +00:00
Jiasheng Jiang
2169b79258 net: ethernet: lpc_eth: Handle error for clk_enable
As the potential failure of the clk_enable(),
it should be better to check it and return error
if fails.

Fixes: b7370112f5 ("lpc32xx: Added ethernet driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-09 12:15:20 +00:00
Minghao Chi (CGEL ZTE)
2a760554dc net:mcf8390: Use platform_get_irq() to get the interrupt
It is not recommened to use platform_get_resource(pdev, IORESOURCE_IRQ)
for requesting IRQ's resources any more, as they can be not ready yet in
case of DT-booting.

platform_get_irq() instead is a recommended way for getting IRQ even if
it was not retrieved earlier.

It also makes code simpler because we're getting "int" value right away
and no conversion from resource to int is required.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-09 12:14:30 +00:00
Jiasheng Jiang
6babfc6e6f net: ethernet: ti: cpts: Handle error for clk_enable
As the potential failure of the clk_enable(),
it should be better to check it and return error
if fails.

Fixes: 8a2c9a5ab4 ("net: ethernet: ti: cpts: rework initialization/deinitialization")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-09 12:12:46 +00:00
Ping-Ke Shih
12b604d4ba rtw89: declare HE capabilities in 6G band
To work properly in 6G band, declare HE 6G capabilities. Without this fix,
it can only TX/RX with OFDM rates.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220307012741.6371-1-pkshih@realtek.com
2022-03-09 13:39:53 +02:00
Johannes Berg
517eed92bc rtw89: fix HE PHY bandwidth capability
Bit 2 and 3 are reserved on 5/6 GHz and bit 1 is reserved on 2.4 GHz,
so the driver should only set the non-reserved bits according
to band.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220301004331.6621-1-pkshih@realtek.com
2022-03-09 13:39:23 +02:00
Chin-Yen Lee
7bfd05ff4e rtw89: add tx_wake notify for low ps mode
We found management frames get stuck when wifi chip
enters low ps mode. So we add one notify wake function
to trigger wifi chip into normal mode before forwarding
management frames.

Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220225030851.13327-3-pkshih@realtek.com
2022-03-09 13:38:34 +02:00
Po Hao Huang
8959077797 rtw89: 8852a: add ieee80211_ops::hw_scan
Declare this function allows us to use customized scanning policy, so
each scan takes less time. This is a similar implementation to hw_scan
in rtw88, except that we offload more items to firmware and extend the
maximum IE length. For backward compatibility, we fallback to sw_scan
when firmware does not support this feature.

Signed-off-by: Po Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220225030851.13327-2-pkshih@realtek.com
2022-03-09 13:38:23 +02:00
Dimitris Michailidis
40bb09c87f net/fungible: CONFIG_FUN_CORE needs SBITMAP
fun_core.ko uses sbitmaps and needs to select SBITMAP.
Fixes below errors:

ERROR: modpost: "__sbitmap_queue_get"
[drivers/net/ethernet/fungible/funcore/funcore.ko] undefined!
ERROR: modpost: "sbitmap_finish_wait"
[drivers/net/ethernet/fungible/funcore/funcore.ko] undefined!
ERROR: modpost: "sbitmap_queue_clear"
[drivers/net/ethernet/fungible/funcore/funcore.ko] undefined!
ERROR: modpost: "sbitmap_prepare_to_wait"
[drivers/net/ethernet/fungible/funcore/funcore.ko] undefined!
ERROR: modpost: "sbitmap_queue_init_node"
[drivers/net/ethernet/fungible/funcore/funcore.ko] undefined!
ERROR: modpost: "sbitmap_queue_wake_all"
[drivers/net/ethernet/fungible/funcore/funcore.ko] undefined!

v2: correct "Fixes" SHA

Fixes: 749efb1e6d ("net/fungible: Kconfig, Makefiles, and MAINTAINERS")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Dimitris Michailidis <dmichail@fungible.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-09 11:26:44 +00:00
Dimitris Michailidis
cdba24904e net/fungible: Fix local_memory_node error
Stephen Rothwell reported the following failure on powerpc:

ERROR: modpost: ".local_memory_node"
[drivers/net/ethernet/fungible/funeth/funeth.ko] undefined!

AFAICS this is because local_memory_node() is a non-inline non-exported
function when CONFIG_HAVE_MEMORYLESS_NODES=y. It is also the wrong API
to get a CPU's memory node. Use cpu_to_mem() in the two spots it's used.

Fixes: ee6373ddf3 ("net/funeth: probing and netdev ops")
Fixes: db37bc177d ("net/funeth: add the data path")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Dimitris Michailidis <dmichail@fungible.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-09 11:26:07 +00:00
Vladimir Oltean
7e580490ac net: dsa: felix: avoid early deletion of host FDB entries
The Felix driver declares FDB isolation but puts all standalone ports in
VID 0. This is mostly problem-free as discussed with Alvin here:
https://patchwork.kernel.org/project/netdevbpf/cover/20220302191417.1288145-1-vladimir.oltean@nxp.com/#24763870

however there is one catch. DSA still thinks that FDB entries are
installed on the CPU port as many times as there are user ports, and
this is problematic when multiple user ports share the same MAC address.

Consider the default case where all user ports inherit their MAC address
from the DSA master, and then the user runs:

ip link set swp0 address 00:01:02:03:04:05

The above will make dsa_slave_set_mac_address() call
dsa_port_standalone_host_fdb_add() for 00:01:02:03:04:05 in port 0's
standalone database, and dsa_port_standalone_host_fdb_del() for the old
address of swp0, again in swp0's standalone database.

Both the ->port_fdb_add() and ->port_fdb_del() will be propagated down
to the felix driver, which will end up deleting the old MAC address from
the CPU port. But this is still in use by other user ports, so we end up
breaking unicast termination for them.

There isn't a problem in the fact that DSA keeps track of host
standalone addresses in the individual database of each user port: some
drivers like sja1105 need this. There also isn't a problem in the fact
that some drivers choose the same VID/FID for all standalone ports.
It is just that the deletion of these host addresses must be delayed
until they are known to not be in use any longer, and only the driver
has this knowledge. Since DSA keeps these addresses in &cpu_dp->fdbs and
&cpu_db->mdbs, it is just a matter of walking over those lists and see
whether the same MAC address is present on the CPU port in the port db
of another user port.

I have considered reusing the generic dsa_port_walk_fdbs() and
dsa_port_walk_mdbs() schemes for this, but locking makes it difficult.
In the ->port_fdb_add() method and co, &dp->addr_lists_lock is held, but
dsa_port_walk_fdbs() also acquires that lock. Also, even assuming that
we introduce an unlocked variant of the address iterator, we'd still
need some relatively complex data structures, and a void *ctx in the
dsa_fdb_walk_cb_t which we don't currently pass, such that drivers are
able to figure out, after iterating, whether the same MAC address is or
isn't present in the port db of another port.

All the above, plus the fact that I expect other drivers to follow the
same model as felix where all standalone ports use the same FID, made me
conclude that a generic method provided by DSA is necessary:
dsa_fdb_present_in_other_db() and the mdb equivalent. Felix calls this
from the ->port_fdb_del() handler for the CPU port, when the database
was classified to either a port db, or a LAG db.

For symmetry, we also call this from ->port_fdb_add(), because if the
address was installed once, then installing it a second time serves no
purpose: it's already in hardware in VID 0 and it affects all standalone
ports.

This change moves dsa_db_equal() from switch.c to dsa.c, since it now
has one more caller.

Fixes: 54c3198460 ("net: mscc: ocelot: enforce FDB isolation when VLAN-unaware")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-09 11:12:10 +00:00
Vladimir Oltean
f2e2662ccf net: dsa: felix: actually disable flooding towards NPI port
The two blamed commits were written/tested individually but not
together.

When put together, commit 90897569be ("net: dsa: felix: start off with
flooding disabled on the CPU port"), which deletes a reinitialization of
PGID_UC/PGID_MC/PGID_BC, is no longer sufficient to ensure that these
port masks don't contain the CPU port module.

This is because commit b903a6bd2e ("net: dsa: felix: migrate flood
settings from NPI to tag_8021q CPU port") overwrites the hardware
default settings towards the CPU port module with the settings that used
to be present on the NPI port treated as a regular port. There, flooding
is enabled, so flooding would get enabled on the CPU port module too.

Adding conditional logic somewhere within felix_setup_tag_npi() to
configure either the default no-flood policy or the flood policy
inherited from the tag_8021q CPU port from a previous call to
dsa_port_manage_cpu_flood() is getting complicated. So just let the
migration logic do its thing during initial setup (which will
temporarily turn on flooding), then turn flooding off for the NPI port
after felix_set_tag_protocol() finishes. Here we are in felix_setup(),
so the DSA slave interfaces are not yet created, and this doesn't affect
traffic in any way.

Fixes: 90897569be ("net: dsa: felix: start off with flooding disabled on the CPU port")
Fixes: b903a6bd2e ("net: dsa: felix: migrate flood settings from NPI to tag_8021q CPU port")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-09 11:12:10 +00:00
Vladimir Oltean
c69f40ac60 net: dsa: felix: drop "bool change" from felix_set_tag_protocol
We no longer need the workaround in the felix driver to avoid calling
dsa_port_walk_fdbs() when &dp->fdbs is an uninitialized list, because
that list is now initialized from all call paths of felix_set_tag_protocol().

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-09 11:12:09 +00:00
David S. Miller
030141b0fc Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2022-03-08

This series contains updates to iavf, i40e, and ice drivers.

Michal ensures netdev features are properly updated to reflect VLAN
changes received from PF and adds an additional flag for MSI-X
reinitialization as further differentiation of reinitialization
operations is needed for iavf.

Jake stops disabling of VFs due to failed virtchannel responses for
i40e and ice driver.

Dave moves MTU event notification to the service task to prevent issues
with RTNL lock for ice.

Christophe Jaillet corrects an allocation to GFP_ATOMIC instead of
GFP_KERNEL for ice.

Jedrzej fixes the value for link speed comparison which was preventing
the requested value from being set for ice.
---
Note: This will conflict when merging with net-next. Resolution:

diff --cc drivers/net/ethernet/intel/ice/ice.h
index dc42ff92dbad,3121f9b04f59..000000000000
--- a/drivers/net/ethernet/intel/ice/ice.h
+++ b/drivers/net/ethernet/intel/ice/ice.h
@@@ -484,10 -481,9 +484,11 @@@ enum ice_pf_flags
        ICE_FLAG_LEGACY_RX,
        ICE_FLAG_VF_TRUE_PROMISC_ENA,
        ICE_FLAG_MDD_AUTO_RESET_VF,
 +      ICE_FLAG_VF_VLAN_PRUNING,
        ICE_FLAG_LINK_LENIENT_MODE_ENA,
        ICE_FLAG_PLUG_AUX_DEV,
+       ICE_FLAG_MTU_CHANGED,
 +      ICE_FLAG_GNSS,                  /* GNSS successfully initialized */
        ICE_PF_FLAGS_NBITS              /* must be last */
  };
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-09 10:42:14 +00:00