Commit graph

112,392 commits

Author SHA1 Message Date
Michael Chan
7c492a2530 bnxt_en: Eliminate unintended link toggle during FW reset
If the flow control settings have been changed, a subsequent FW reset
may cause the ethernet link to toggle unnecessarily.  This link toggle
will increase the down time by a few seconds.

The problem is caused by bnxt_update_phy_setting() detecting a false
mismatch in the flow control settings between the stored software
settings and the current FW settings after the FW reset.  This mismatch
is caused by the AUTONEG bit added to link_info->req_flow_ctrl in an
inconsistent way in bnxt_set_pauseparam() in autoneg mode.  The AUTONEG
bit should not be added to link_info->req_flow_ctrl.

Reviewed-by: Colin Winegarden <colin.winegarden@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-05 11:16:56 +00:00
Michael Chan
9a3bc77ec6 bnxt_en: Properly report no pause support on some cards
Some cards are configured to never support link pause or PFC.  Discover
these cards and properly report no pause support to ethtool.  Disable
PFC settings from DCBNL if PFC is unsupported.

Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-05 11:16:56 +00:00
Edwin Peer
0f5a4841f2 bnxt_en: introduce initial link state of unknown
This will force link state to always be logged for initial NIC open.

Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-05 11:16:55 +00:00
Kalesh AP
02acd39953 bnxt_en: parse result field when NVRAM package install fails
Instead of always returning -ENOPKG, decode the firmware error
code further when the HWRM_NVM_INSTALL_UPDATE firmware call fails.
Return a more suitable error code to userspace and log an error
in dmesg.

Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-05 11:16:55 +00:00
Kalesh AP
54ff1e3e8f bnxt_en: add more error checks to HWRM_NVM_INSTALL_UPDATE
FW returns error code "NVM_INSTALL_UPDATE_CMD_ERR_CODE_ANTI_ROLLBACK"
in the response to indicate that HWRM_NVM_INSTALL_UPDATE command has
failed due to Anti-rollback feature. Parse the error and return an
appropriate error code to the user.

Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-05 11:16:55 +00:00
Kalesh AP
8e42aef0b7 bnxt_en: refactor error handling of HWRM_NVM_INSTALL_UPDATE
This is in anticipation of handling more "cmd_err" from FW in the next
patch.

Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-05 11:16:55 +00:00
Robert Hancock
0b79b8dc97 net: axienet: add coalesce timer ethtool configuration
Add the ability to configure the RX/TX coalesce timer with ethtool.
Change default setting to scale with the clock rate rather than being a
fixed number of clock cycles.

Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-05 11:12:08 +00:00
Robert Hancock
40da5d680e net: axienet: reduce default RX interrupt threshold to 1
Now that NAPI has been implemented, the hardware interrupt mitigation
mechanism is not needed to avoid excessive interrupt load in most cases.
Reduce the default RX interrupt threshold to 1 to reduce introduced
latency. This can be increased with ethtool if desired if some applications
still want to reduce interrupts.

Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-05 11:12:08 +00:00
Robert Hancock
cc37610caa net: axienet: implement NAPI and GRO receive
Implement NAPI and GRO receive. In addition to better performance, this
also avoids handling RX packets in hard IRQ context, which reduces the
IRQ latency impact to other devices.

Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-05 11:12:08 +00:00
Robert Hancock
0155ae6eb8 net: axienet: don't set IRQ timer when IRQ delay not used
When the RX or TX coalesce count is set to 1, there's no point in
setting the delay timer value since an interrupt will already be raised
on every packet, and the delay interrupt just causes extra pointless
interrupts.

Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-05 11:12:08 +00:00
Robert Hancock
84b9ccc074 net: axienet: Clean up DMA start/stop and error handling
Simplify the DMA error handling process, and remove some duplicated code
between the DMA error handling and the stop function.

Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-05 11:12:08 +00:00
Robert Hancock
17882fd425 net: axienet: Clean up device used for DMA calls
Instead of using lp->ndev.parent to find the correct device to use for
DMA API calls, just use the dev attribute in the device structure.

Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-05 11:12:08 +00:00
Robert Hancock
7a7d340ba4 net: axienet: fix RX ring refill allocation failure handling
If a memory allocation error occurred during an attempt to refill a slot
in the RX ring after the packet was received, the hardware tail pointer
would still have been updated to point to or past the slot which remained
marked as previously completed. This would likely result in the DMA engine
raising an error when it eventually tried to use that slot again.

If a slot cannot be refilled, then just stop processing and do not move
the tail pointer past it. On the next attempt, we should skip receiving
the packet from the empty slot and just try to refill it again.

This failure mode has not actually been observed, but was found as part
of other driver updates.

Fixes: 8a3b7a252d ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-05 11:12:08 +00:00
Luiz Angelo Daros de Luca
59dc7b4f7f net: dsa: realtek: rtl8365mb: add support for rtl8_4t
The trailing tag is also supported by this family. The default is still
rtl8_4 but now the switch supports changing the tag to rtl8_4t.

Reintroduce the dropped cpu in struct rtl8365mb (removed by 6147631).

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-05 11:04:25 +00:00
Meng Tang
43ff0d76f2 bcm63xx_enet: Use platform_get_irq() to get the interrupt
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on
static allocation of IRQ resources in DT core code, this
causes an issue when using hierarchical interrupt domains
using "interrupts" property in the node as this bypassed
the hierarchical setup and messed up the irq chaining.

In preparation for removal of static setup of IRQ resource
from DT core code use platform_get_irq().

Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Link: https://lore.kernel.org/r/20220303100815.25605-1-tangmeng@uniontech.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-04 21:34:59 -08:00
Heiner Kallweit
a502a8f040 net: phy: meson-gxl: fix interrupt handling in forced mode
This PHY doesn't support a link-up interrupt source. If aneg is enabled
we use the "aneg complete" interrupt for this purpose, but if aneg is
disabled link-up isn't signaled currently.
According to a vendor driver there's an additional "energy detect"
interrupt source that can be used to signal link-up if aneg is disabled.
We can safely ignore this interrupt source if aneg is enabled.

This patch was tested on a TX3 Mini TV box with S905W (even though
boot message says it's a S905D).

This issue has been existing longer, but due to changes in phylib and
the driver the patch applies only from the commit marked as fixed.

Fixes: 84c8f773d2 ("net: phy: meson-gxl: remove the use of .ack_callback()")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/04cac530-ea1b-850e-6cfa-144a55c4d75d@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-04 21:03:45 -08:00
Horatiu Vultur
349fa2796e net: sparx5: Fix initialization of variables on stack
The variables 'res' inside the functions sparx5_ptp_get_1ppm and
sparx5_ptp_get_nominal_value was not initialized. So in case of the default
case of the switch after, it would return an uninitialized variable.
This makes also the clang builds to failed.

Fixes: 0933bd0404 ("net: sparx5: Add support for ptp clocks")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20220304140918.3356873-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-04 20:57:57 -08:00
Jiapeng Chong
1039135aed net: ethernet: sun: Remove redundant code
Since the starting value in the for loop is greater than or equal to 1,
the restriction is CAS_FLAG_REG_PLUS is in the file cassini.h is
defined as 0x1 by macro, and the for loop and if condition is not
satisfied, so the code here is redundant.

Clean up the following smatch warning:

drivers/net/ethernet/sun/cassini.c:3513 cas_start_dma() warn: we never
enter this loop.

drivers/net/ethernet/sun/cassini.c:1239 cas_init_rx_dma() warn: we never
enter this loop.

drivers/net/ethernet/sun/cassini.c:1247 cas_init_rx_dma() warn: we never
enter this loop.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-04 13:07:54 +00:00
Niklas Söderlund
6402528b7a nfp: xsk: add AF_XDP zero-copy Rx and Tx support
This patch adds zero-copy Rx and Tx support for AF_XDP sockets. It do so
by adding a separate NAPI poll function that is attached to a each
channel when the XSK socket is attached with XDP_SETUP_XSK_POOL, and
restored when the XSK socket is terminated, this is done per channel.

Support for XDP_TX is implemented and the XDP buffer can safely be moved
from the Rx to the Tx queue and correctly freed and returned to the XSK
pool once it's transmitted.

Note that when AF_XDP zero-copy is enabled, the XDP action XDP_PASS
will allocate a new buffer and copy the zero-copy frame prior
passing it to the kernel stack.

This patch is based on previous work by Jakub Kicinski.

Signed-off-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-04 13:06:12 +00:00
Niklas Söderlund
9c91a3653f nfp: xsk: add configuration check for XSK socket chunk size
In preparation for adding AF_XDP support add a configuration check to
make sure the buffer size can not be set to a larger value then the XSK
socket chunk size.

Signed-off-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-04 13:06:12 +00:00
Niklas Söderlund
543bd14fc8 nfp: xsk: add an array of xsk buffer pools to each data path
Each data path needs an array of xsk pools to track if an xsk socket is
in use. Add this array and make sure it's handled correctly when the
data path is duplicated.

Signed-off-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-04 13:06:12 +00:00
Jakub Kicinski
58eb436353 nfp: wrap napi add/del logic
There will be more NAPI register logic once AF_XDP support is
added, wrap our already conditional napi add/del into helpers.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-04 13:06:12 +00:00
Niklas Söderlund
3cdb35fb9c nfp: expose common functions to be used for AF_XDP
There are some common functionality that can be reused in the upcoming
AF_XDP support. Expose those functions in the header. While at it mark
some arguments of nfp_net_rx_csum() as const.

Signed-off-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-04 13:06:12 +00:00
Horatiu Vultur
608111fc58 net: sparx5: Implement get_ts_info
Implement the function get_ts_info in ethtool_ops which is needed to get
the HW capabilities for timestamping.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-04 13:03:10 +00:00
Horatiu Vultur
d31d37912e net: sparx5: Add support for ptp interrupts
When doing 2-step timestamping the HW will generate an interrupt when it
managed to timestamp a frame. It is the SW responsibility to read it
from the FIFO.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-04 13:03:10 +00:00
Horatiu Vultur
70dfe25cd8 net: sparx5: Update extraction/injection for timestamping
Update both the extraction and injection to do timestamping of the
frames. The extraction is always doing the timestamping while for
injection is doing the timestamping only if it is configured.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-04 13:03:09 +00:00
Horatiu Vultur
589a07b8eb net: sparx5: Implement SIOCSHWTSTAMP and SIOCGHWTSTAMP
Implement the ioctl callbacks SIOCSHWTSTAMP and SIOCGHWTSTAMP to allow
to configure the ports to enable/disable timestamping for TX. The RX
timestamping is always enabled. The HW is capable to run both 1-step
timestamping and 2-step timestamping.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-04 13:03:09 +00:00
Horatiu Vultur
0933bd0404 net: sparx5: Add support for ptp clocks
The sparx5 has 3 PHC. Enable each of them, for now all the
timestamping is happening on the first PHC.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-04 13:03:09 +00:00
Horatiu Vultur
3193a61181 net: sparx5: Add registers that are used by ptp functionality
Add the registers that will be used to configure the PHC in the HW.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-04 13:03:09 +00:00
Horatiu Vultur
8f68f53a93 net: sparx5: Move ifh from port to local variable
Currently the ifh is not changed, it is fixed for each frame for each
port that is sent out. Move this on the stack because this ifh needs to
be change based on the frames that are send out. This is needed for PTP
frames.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-04 13:03:09 +00:00
Arun Ramadoss
8a1b415d70 net: phy: added ethtool master-slave configuration support
To configure the T1 phy as master or slave using the ethtool -s <dev>
master-slave <forced-master/forced-slave>, the config_aneg and read
status functions are added.

Signed-off-by: Prasanna Vengateshan <prasanna.vengateshan@microchip.com>
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-04 12:45:19 +00:00
Arun Ramadoss
680baca546 net: phy: added the LAN937x phy support
LAN937x T1 switch is based on LAN87xx Phy, so reusing the init script of
the LAN87xx. There is a workaround in accessing the DSP bank register
for LAN937x Phy. Whenever there is a bank switch to DSP registers, then
we need a one dummy read access before proceeding to the actual register
access.

Signed-off-by: Prasanna Vengateshan <prasanna.vengateshan@microchip.com>
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-04 12:45:19 +00:00
Arun Ramadoss
8637034bc6 net: phy: updated the initialization routine for LAN87xx
The new initialization sequence is the improvement to the existing init
routine. Init routine does soft reset, run init script and set
Hw_init. Added the new access_smi_poll_timeout() for polling smi
bank write.

Signed-off-by: Prasanna Vengateshan <prasanna.vengateshan@microchip.com>
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-04 12:45:19 +00:00
Arun Ramadoss
ccc8cc5bad net: phy: removed empty lines in LAN87XX
Removed the empty lines in struct phy_drivers.

Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-04 12:45:18 +00:00
Arun Ramadoss
79cea9a9c9 net: phy: used the PHY_ID_MATCH_MODEL macro for LAN87XX
Used the PHY_ID_MATCH_MODEL MACRO for describing the phy_id and
phy_id_mask.

Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-04 12:45:18 +00:00
Arun Ramadoss
8eee3d3536 net: phy: used genphy_soft_reset for phy reset in LAN87xx
Replaced the current code of resetting of LAN87xx phy to
genphy_soft_reset library function.

Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-04 12:45:18 +00:00
Divya Koppera
ece1950283 net: phy: micrel: 1588 support for LAN8814 phy
Add support for 1588 in LAN8814 phy driver.
It supports 1-step and 2-step timestamping.

Co-developed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Divya Koppera <Divya.Koppera@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-04 12:43:01 +00:00
Divya Koppera
4488f6b614 net: phy: micrel: Fix concurrent register access
Make Extended page register accessing atomic,
to overcome unexpected output from register
reads/writes.

Fixes: 7c2dcfa295 ("net: phy: micrel: Add support for LAN8804 PHY")
Signed-off-by: Divya Koppera<Divya.Koppera@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-04 12:43:01 +00:00
Robert Hancock
0bf476fc36 net: macb: Fix lost RX packet wakeup race in NAPI receive
There is an oddity in the way the RSR register flags propagate to the
ISR register (and the actual interrupt output) on this hardware: it
appears that RSR register bits only result in ISR being asserted if the
interrupt was actually enabled at the time, so enabling interrupts with
RSR bits already set doesn't trigger an interrupt to be raised. There
was already a partial fix for this race in the macb_poll function where
it checked for RSR bits being set and re-triggered NAPI receive.
However, there was a still a race window between checking RSR and
actually enabling interrupts, where a lost wakeup could happen. It's
necessary to check again after enabling interrupts to see if RSR was set
just prior to the interrupt being enabled, and re-trigger receive in that
case.

This issue was noticed in a point-to-point UDP request-response protocol
which periodically saw timeouts or abnormally high response times due to
received packets not being processed in a timely fashion. In many
applications, more packets arriving, including TCP retransmissions, would
cause the original packet to be processed, thus masking the issue.

Fixes: 02f7a34f34 ("net: macb: Re-enable RX interrupt only when RX is done")
Cc: stable@vger.kernel.org
Co-developed-by: Scott McNutt <scott.mcnutt@siriusxm.com>
Signed-off-by: Scott McNutt <scott.mcnutt@siriusxm.com>
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-04 12:05:54 +00:00
Sebastian Andrzej Siewior
566214f446 net: macvlan: Use netif_rx().
Since commit
   baebdf48c3 ("net: dev: Makes sure netif_rx() can be invoked in any context.")

the function netif_rx() can be used in preemptible/thread context as
well as in interrupt context.

Use netif_rx().

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-04 12:02:19 +00:00
Sebastian Andrzej Siewior
90f77c1c51 net: ethernet: Use netif_rx().
Since commit
   baebdf48c3 ("net: dev: Makes sure netif_rx() can be invoked in any context.")

the function netif_rx() can be used in preemptible/thread context as
well as in interrupt context.

Use netif_rx().

Cc: Łukasz Stelmach <l.stelmach@samsung.com>
Cc: Horatiu Vultur <horatiu.vultur@microchip.com>
Cc: UNGLinuxDriver@microchip.com
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-04 12:02:19 +00:00
Sebastian Andrzej Siewior
db00cc9da0 net: dsa: Use netif_rx().
Since commit
   baebdf48c3 ("net: dev: Makes sure netif_rx() can be invoked in any context.")

the function netif_rx() can be used in preemptible/thread context as
well as in interrupt context.

Use netif_rx().

Cc: Kurt Kanzenbach <kurt@linutronix.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Vivien Didelot <vivien.didelot@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Kurt Kanzenbach <kurt@linutronix.de> # hellcreek
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-04 12:02:19 +00:00
Sebastian Andrzej Siewior
3fb4430e73 net: caif: Use netif_rx().
Since commit
   baebdf48c3 ("net: dev: Makes sure netif_rx() can be invoked in any context.")

the function netif_rx() can be used in preemptible/thread context as
well as in interrupt context.

Use netif_rx().

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-04 12:02:19 +00:00
David S. Miller
4ee508ff78 Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:

====================
100GbE Intel Wired LAN Driver Updates 2022-03-03

Jacob Keller says:

This series refactors the ice networking driver VF storage from a simple
static array to a hash table. It also introduces krefs and proper locking
and protection to prevent common use-after-free and concurrency issues.

There are two motivations for this work. First is to make the ice driver
more resilient by preventing a whole class of use-after-free bugs that can
occur around concurrent access to VF structures while removing VFs.

The second is to prepare the ice driver for future virtualization work to
support Scalable IOV, an alternative VF implementation compared to Single
Root IOV. The new VF implementation will allow for more dynamic VF creation
and removal, necessitating a more robust implementation for VF storage that
can't rely on the existing mechanisms to prevent concurrent access
violations.

The first few patches are cleanup and preparatory work needed to make the
conversion to the hash table safe. Following this preparatory work is a
patch to migrate the VF structures and variables to a new sub-structure for
code clarity. Next introduce new interface functions to abstract the VF
storage. Finally, the driver is actually converted to the hash table and
kref implementation.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-04 09:45:51 +00:00
Vladimir Oltean
162fbf6a2f net: dsa: felix: remove redundant assignment in felix_8021q_cpu_port_deinit
Due to an apparently incorrect conflict resolution on my part in commit
54c3198460 ("net: mscc: ocelot: enforce FDB isolation when
VLAN-unaware"), "ocelot->ports[port]->is_dsa_8021q_cpu = false" was
supposed to be replaced by "ocelot_port_unset_dsa_8021q_cpu(ocelot, port)"
which does the same thing, and more. But now we have both, so the direct
assignment is redundant. Remove it.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-04 09:21:23 +00:00
Vladimir Oltean
5d3bb7dda4 net: dsa: felix: print error message in felix_check_xtr_pkt()
Packet extraction failures over register-based MMIO are silent, and
difficult to pinpoint. Add an error message to remedy this.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-04 09:21:23 +00:00
Vladimir Oltean
dbd032856b net: dsa: felix: initialize "err" to 0 in felix_check_xtr_pkt()
Automated tools complain that felix_check_xtr_pkt() has logic to drain
the CPU queue on the reception of a PTP packet over Ethernet, yet it
returns an uninitialized error code in the case where the CPU queue was
empty.

This is not likely to happen (/possible if hardware works correctly),
but it isn't a fatal condition either. The PTP packet will be dequeued
from the CPU queue when the next PTP packet arrives. So initialize "err"
to 0 for the case where nothing was dequeued during this iteration.

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-04 09:21:23 +00:00
Vladimir Oltean
d219b4b674 net: dsa: felix: drop the ptp_type argument from felix_check_xtr_pkt()
The DSA ->port_rxtstamp() function is never called for PTP_CLASS_NONE:

dsa_skb_defer_rx_timestamp:

	if (type == PTP_CLASS_NONE)
		return false;

	if (likely(ds->ops->port_rxtstamp))
		return ds->ops->port_rxtstamp(ds, p->dp->index, skb, type);

So practically, the argument is unused, so remove it.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-04 09:21:23 +00:00
Vladimir Oltean
28c1305b0b net: dsa: felix: remove ocelot->npi assignment from felix_8021q_cpu_port_init
This assignment is redundant, since ocelot->npi has already been set to
-1 by felix_npi_port_deinit(). Call path:

felix_change_tag_protocol
-> felix_del_tag_protocol(DSA_TAG_PROTO_OCELOT)
   -> felix_teardown_tag_npi
      -> felix_npi_port_deinit
-> felix_set_tag_protocol(DSA_TAG_PROTO_OCELOT_8021Q)
   -> felix_setup_tag_8021q
      -> felix_8021q_cpu_port_init

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-04 09:21:23 +00:00
Vladimir Oltean
c3cde44f3c net: mscc: ocelot: use pretty names for IPPROTO_UDP and IPPROTO_TCP
Hardcoding these IP protocol numbers in is2_entry_set() obscures the
purpose of the code, so replace the magic numbers with the definitions
from linux/in.h.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-04 09:21:23 +00:00