commit b1049f2d68 upstream.
commit 9d26d3a8f1 ("PCI: Put PCIe ports into D3 during suspend") sets the
policy that all PCIe ports are allowed to use D3. When the system is
suspended if the port is not power manageable by the platform and won't be
used for wakeup via a PME this sets up the policy for these ports to go
into D3hot.
This policy generally makes sense from an OSPM perspective but it leads to
problems with wakeup from suspend on the TUXEDO Sirius 16 Gen 1 with a
specific old BIOS. This manifests as a system hang.
On the affected Device + BIOS combination, add a quirk for the root port of
the problematic controller to ensure that these root ports are not put into
D3hot at suspend.
This patch is based on
https://lore.kernel.org/linux-pci/20230708214457.1229-2-mario.limonciello@amd.com
but with the added condition both in the documentation and in the code to
apply only to the TUXEDO Sirius 16 Gen 1 with a specific old BIOS and only
the affected root ports.
Fixes: 9d26d3a8f1 ("PCI: Put PCIe ports into D3 during suspend")
Suggested-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250114222436.1075456-1-wse@tuxedocomputers.com
Co-developed-by: Georg Gottleuber <ggo@tuxedocomputers.com>
Signed-off-by: Georg Gottleuber <ggo@tuxedocomputers.com>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Cc: <stable@vger.kernel.org> # 6.1+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b615fbd70f upstream.
For interrupt-map entries, the DTS specification requires
that #address-cells is defined for both the child node and the
interrupt parent. For the PCIe interrupt-map entries, the parent
node ("gic") has not specified #address-cells. The existing layout
of the PCIe interrupt-map entries indicates that it assumes
that #address-cells is zero for this node.
Explicitly set #address-cells to zero for "gic" so that it complies
with the device tree specification.
NVIDIA EDK2 works around this issue by assuming #address-cells
is zero in this scenario, but that workaround is being removed and so
this update is needed or else NVIDIA EDK2 cannot successfully parse the
device tree and the board cannot boot.
Fixes: ec142c44b0 ("arm64: tegra: Add P2U and PCIe controller nodes to Tegra234 DT")
Signed-off-by: Brad Griffis <bgriffis@nvidia.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241213235602.452303-1-bgriffis@nvidia.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3b4309546b upstream.
The auto_parser assumed sort() was stable, but the kernel's sort() uses
heapsort, which has never been stable. After commit 0e02ca29a5
("lib/sort: optimize heapsort with double-pop variation"), the order of
equal elements changed, causing the headset to fail to work.
Fix the issue by recording the original order of elements before
sorting and using it as a tiebreaker for equal elements in the
comparison function.
Fixes: b9030a005d ("ALSA: hda - Use standard sort function in hda_auto_parser.c")
Reported-by: Austrum <austrum.lab@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219158
Tested-by: Austrum <austrum.lab@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Link: https://patch.msgid.link/20250128165415.643223-1-visitorckw@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1aec3ed2e3 upstream.
Positivo C6400 is equipped with ALC269VB, and it needs
ALC269VB_FIXUP_ASUS_ZENBOOK quirk to make its headset mic work.
Also must to limits the microphone boost.
Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250114170619.11510-1-edson.drosdeck@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8004d635f2 upstream.
This reverts commit 3dd075fe8e.
Tomasz has reported that his device, Generalplus Technology Inc. 808 Camera,
with ID 1b3f:2002, stopped being detected:
$ ls -l /dev/video*
zsh: no matches found: /dev/video*
[ 7.230599] usb 3-2: Found multiple Units with ID 5
This particular device is non-compliant, having both the Output Terminal
and Processing Unit with ID 5. uvc_scan_fallback, though, is able to build
a chain. However, when media elements are added and uvc_mc_create_links
call uvc_entity_by_id, it will get the incorrect entity,
media_create_pad_link will WARN, and it will fail to register the entities.
In order to reinstate support for such devices in a timely fashion,
reverting the fix for these warnings is appropriate. A proper fix that
considers the existence of such non-compliant devices will be submitted in
a later development cycle.
Reported-by: Tomasz Sikora <sikora.tomus@gmail.com>
Fixes: 3dd075fe8e ("media: uvcvideo: Require entities to have a non-zero unique ID")
Cc: stable@vger.kernel.org
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250114200045.1401644-1-cascardo@igalia.com
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b13ee668e8 upstream.
blkdev_read_iter() has a few odd checks, like gating the position and
count adjustment on whether or not the result is bigger-than-or-equal to
zero (where bigger than makes more sense), and not checking the return
value of blkdev_direct_IO() before doing an iov_iter_revert(). The
latter can lead to attempting to revert with a negative value, which
when passed to iov_iter_revert() as an unsigned value will lead to
throwing a WARN_ON() because unroll is bigger than MAX_RW_COUNT.
Be sane and don't revert for -EIOCBQUEUED, like what is done in other
spots.
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 42a39e4aa5 upstream.
Currently, installation of Debian 12.8 for mipsel fails on machines
without an FPU [1]. This is caused by the fact that zstd (which is used
for initramfs compression) executes the prefx instruction, which is not
emulated properly by the kernel.
The prefx (Prefetch Indexed) instruction fetches data from memory into
the cache without any side effects. Though functionally unrelated, it
requires an FPU [2].
Bytecode format of this instruction ends on "001111" binary:
(prefx instruction format) & 0x0000003f = 0x0000000f
The code in fpux_emu() runs like so:
#define MIPSInst(x) x
#define MIPSInst_FMA_FFMT(x) (MIPSInst(x) & 0x00000007)
#define MIPSInst_FUNC(x) (MIPSInst(x) & 0x0000003f)
enum cop1x_func { ..., pfetch_op = 0x0f, ... };
...
switch (MIPSInst_FMA_FFMT(ir)) {
...
case 0x3:
if (MIPSInst_FUNC(ir) != pfetch_op)
return SIGILL;
/* ignore prefx operation */
break;
default:
return SIGILL;
}
That snippet above contains a logic error and the
if (MIPSInst_FUNC(ir) != pfetch_op)
comparison always fires.
When MIPSInst_FUNC(ir) is equal to pfetch_op, ir must end on 001111
binary. In this case, MIPSInst_FMA_FFMT(ir) must be equal to 0x7, which
does not match that case label.
This causes emulation failure for the prefx instruction. Fix it.
This has been broken by
commit 919af8b96c ("MIPS: Make definitions of MIPSInst_FMA_{FUNC,FMTM} consistent with MIPS64 manual")
which modified the MIPSInst_FMA_FFMT macro without updating the users.
Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Cc: stable@vger.kernel.org # after 3 weeks
Cc: Dengcheng Zhu <dzhu@wavecomp.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Fixes: 919af8b96c ("MIPS: Make definitions of MIPSInst_FMA_{FUNC,FMTM} consistent with MIPS64 manual")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[1] https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1091858
[2] MIPS Architecture For Programmers Volume II-A: The MIPS32 Instruction Set
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
commit 8b8f803776 upstream.
dm-crypt uses tag_offset to index the integrity metadata for each crypt
sector. When the initial crypt_convert() returns BLK_STS_DEV_RESOURCE,
dm-crypt will try to continue the crypt/decrypt procedure in a kworker.
However, it resets tag_offset as zero instead of using the tag_offset
related with current sector. It may return unexpected data when using
random IV or return unexpected integrity related error.
Fix the problem by tracking tag_offset in per-IO convert_context.
Therefore, when the crypt/decrypt procedure continues in a kworker, it
could use the next tag_offset saved in convert_context.
Fixes: 8abec36d12 ("dm crypt: do not wait for backlogged crypto request completion in softirq")
Cc: stable@vger.kernel.org
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9fdbbdbbc9 upstream.
The updates of io->sector are the leftovers when dm-crypt allocated
pages for partial write request. However, since commit cf2f1abfbd
("dm crypt: don't allocate pages for a partial request"), there is no
partial request anymore.
After the introduction of write request rb-tree, the updates of
io->sectors may interfere the insertion procedure, because ->sectors of
these write requests which have already been added in the rb-tree may be
changed during the insertion of new write request.
Fix it by removing these buggy updates of io->sectors. Considering these
updates only effect the write request rb-tree, the commit which
introduces the write request rb-tree is used as the fix tag.
Fixes: b3c5fd3052 ("dm crypt: sort writes")
Cc: stable@vger.kernel.org
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 11b9355900 upstream.
The PE Reset State "0" returned by RTAS calls
"ibm_read_slot_reset_[state|state2]" indicates that the reset is
deactivated and the PE is in a state where MMIO and DMA are allowed.
However, the current implementation of "pseries_eeh_get_state()" does
not reflect this, causing drivers to incorrectly assume that MMIO and
DMA operations cannot be resumed.
The userspace drivers as a part of EEH recovery using VFIO ioctls fail
to detect when the recovery process is complete. The VFIO_EEH_PE_GET_STATE
ioctl does not report the expected EEH_PE_STATE_NORMAL state, preventing
userspace drivers from functioning properly on pseries systems.
The patch addresses this issue by updating 'pseries_eeh_get_state()'
to include "EEH_STATE_MMIO_ENABLED" and "EEH_STATE_DMA_ENABLED" in
the result mask for PE Reset State "0". This ensures correct state
reporting to the callers, aligning the behavior with the PAPR specification
and fixing the bug in EEH recovery for VFIO user workflows.
Fixes: 00ba05a12b ("powerpc/pseries: Cleanup on pseries_eeh_get_state()")
Cc: stable@vger.kernel.org
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Narayana Murty N <nnmlinux@linux.ibm.com>
Link: https://lore.kernel.org/stable/20241212075044.10563-1-nnmlinux%40linux.ibm.com
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250116103954.17324-1-nnmlinux@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 531936dee5 upstream.
The maximum number of load/store watchpoints and fetch instruction
watchpoints is 14 each according to LoongArch Reference Manual, so
extend the maximum number of watchpoints from 8 to 14 for ptrace.
By the way, just simply change 8 to 14 for the definition in struct
user_watch_state at the beginning, but it may corrupt uapi, then add
a new struct user_watch_state_v2 directly.
As far as I can tell, the only users for this struct in the userspace
are GDB and LLDB, there are no any problems of software compatibility
between the application and kernel according to the analysis.
The compatibility problem has been considered while developing and
testing. When the applications in the userspace get watchpoint state,
the length will be specified which is no bigger than the sizeof struct
user_watch_state or user_watch_state_v2, the actual length is assigned
as the minimal value of the application and kernel in the generic code
of ptrace:
kernel/ptrace.c: ptrace_regset():
kiov->iov_len = min(kiov->iov_len,
(__kernel_size_t) (regset->n * regset->size));
if (req == PTRACE_GETREGSET)
return copy_regset_to_user(task, view, regset_no, 0,
kiov->iov_len, kiov->iov_base);
else
return copy_regset_from_user(task, view, regset_no, 0,
kiov->iov_len, kiov->iov_base);
For example, there are four kind of combinations, all of them work well.
(1) "older kernel + older gdb", the actual length is 8+(8+8+4+4)*8=200;
(2) "newer kernel + newer gdb", the actual length is 8+(8+8+4+4)*14=344;
(3) "older kernel + newer gdb", the actual length is 8+(8+8+4+4)*8=200;
(4) "newer kernel + older gdb", the actual length is 8+(8+8+4+4)*8=200.
Link: https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#control-and-status-registers-related-to-watchpoints
Cc: stable@vger.kernel.org
Fixes: 1a69f7a161 ("LoongArch: ptrace: Expose hardware breakpoints to debuggers")
Reviewed-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bd2212d658 upstream.
Per Appendix A.7 in Q/LS 0013-2014 (龙芯CPU开发系统固件与内核接口规范 V2.2,
lit. Loongson DevSys Firmware Kernel Interface Specification V2.2),
interface_info.size is size of this interface, not size of the LEFI BIOS
ROM.
In any case, the BIOS ROM Size just cannot be several kilobytes (KB) on
Loongson64 LEFI platforms.
Reported-by: Mingcong Bai <jeffbai@aosc.io>
Suggested-by: Icenowy Zheng <uwu@icenowy.me>
Fixes: 6c1bfbd9df ("MIPS: Loongson64: Add /sys/firmware/lefi/boardinfo")
Cc: stable@vger.kernel.org
Signed-off-by: Kexy Biscuit <kexybiscuit@aosc.io>
Acked-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9f7dea875c upstream.
In the sh-sci driver, sci_ports[0] is used by earlycon. If the earlycon is
still active when sci_probe() is called and the new serial port is supposed
to map to sci_ports[0], return -EBUSY to prevent breaking the earlycon.
This situation should occurs in debug scenarios, and users should be
aware of the potential conflict.
Fixes: 0b0cced19a ("serial: sh-sci: Add CONFIG_SERIAL_EARLYCON support")
Cc: stable@vger.kernel.org
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/r/20250116182249.3828577-4-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eaeee4225d upstream.
The port_cfg object is used by serial_console_write(), which serves as
the write function for the earlycon device. Marking port_cfg as __initdata
causes it to be freed after kernel initialization, resulting in earlycon
becoming unavailable thereafter. Remove the __initdata macro from port_cfg
to resolve this issue.
Fixes: 0b0cced19a ("serial: sh-sci: Add CONFIG_SERIAL_EARLYCON support")
Cc: stable@vger.kernel.org
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Fixes: 0b0cced19a ("serial: sh-sci: Add CONFIG_SERIAL_EARLYCON support")
Link: https://lore.kernel.org/r/20250116182249.3828577-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 22cf4fae66 upstream.
On MSM8916 devices, the serial number exposed in sysfs is constant and does
not change across individual devices. It's always:
db410c:/sys/devices/soc0$ cat serial_number
2644893864
The firmware used on MSM8916 exposes SOCINFO_VERSION(0, 8), which does not
have support for the serial_num field in the socinfo struct. There is an
existing check to avoid exposing the serial number in that case, but it's
not correct: When checking the item_size returned by SMEM, we need to make
sure the *end* of the serial_num is within bounds, instead of comparing
with the *start* offset. The serial_number currently exposed on MSM8916
devices is just an out of bounds read of whatever comes after the socinfo
struct in SMEM.
Fix this by changing offsetof() to offsetofend(), so that the size of the
field is also taken into account.
Cc: stable@vger.kernel.org
Fixes: efb448d0a3 ("soc: qcom: Add socinfo driver")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241230-qcom-socinfo-serialno-oob-v1-1-9b7a890da3da@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit be154b598f upstream.
Clarify that the "NCM" implementation in `ipheth` is very limited, as
iOS devices aren't compatible with the CDC NCM specification in regular
tethering mode.
For a standards-compliant implementation, one shall turn to
the `cdc_ncm` module.
Cc: stable@vger.kernel.org # 6.5.x
Signed-off-by: Foster Snowhill <forst@pen.gy>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ee591f2b28 upstream.
Fix an out-of-bounds DPE read, limit the number of processed DPEs to
the amount that fits into the fixed-size NDP16 header.
Fixes: a2d274c62e ("usbnet: ipheth: add CDC NCM support")
Cc: stable@vger.kernel.org
Signed-off-by: Foster Snowhill <forst@pen.gy>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit efcbc678a1 upstream.
Originally, the total NCM header size was computed as the sum of two
vaguely labelled constants. While accurate, it wasn't particularly clear
where they were coming from.
Use sizes of existing NCM structs where available. Define the total
NDP16 size based on the maximum amount of DPEs that can fit into the
iOS-specific fixed-size header.
This change does not fix any particular issue. Rather, it introduces
intermediate constants that will simplify subsequent commits.
It should also make it clearer for the reader where the constant values
come from.
Cc: stable@vger.kernel.org # 6.5.x
Signed-off-by: Foster Snowhill <forst@pen.gy>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2a9a196429 upstream.
Introduce an rx_error label to reduce repetitions in the header
signature checks.
Store wDatagramIndex and wDatagramLength after endianness conversion to
avoid repeated le16_to_cpu() calls.
Rewrite the loop to return on a null trailing DPE, which is required
by the CDC NCM spec. In case it is missing, fall through to rx_error.
This change does not fix any particular issue. Its purpose is to
simplify a subsequent commit that fixes a potential OoB read by limiting
the maximum amount of processed DPEs.
Cc: stable@vger.kernel.org # 6.5.x
Signed-off-by: Foster Snowhill <forst@pen.gy>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 429fa68b58 upstream.
By definition, a DPE points at the start of a network frame/datagram.
Thus it makes no sense for it to point at anything that's part of the
NCM header. It is not a security issue, but merely an indication of
a malformed DPE.
Enforce that all DPEs point at the data portion of the URB, past the
NCM header.
Fixes: a2d274c62e ("usbnet: ipheth: add CDC NCM support")
Cc: stable@vger.kernel.org
Signed-off-by: Foster Snowhill <forst@pen.gy>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 86586dcb75 upstream.
Original code allowed for the start of NDP16 to be anywhere within the
URB based on the `wNdpIndex` value in NTH16. Only the start position of
NDP16 was checked, so it was possible for even the fixed-length part
of NDP16 to extend past the end of URB, leading to an out-of-bounds
read.
On iOS devices, the NDP16 header always directly follows NTH16. Rely on
and check for this specific format.
This, along with NCM-specific minimal URB length check that already
exists, will ensure that the fixed-length part of NDP16 plus a set
amount of DPEs fit within the URB.
Note that this commit alone does not fully address the OoB read.
The limit on the amount of DPEs needs to be enforced separately.
Fixes: a2d274c62e ("usbnet: ipheth: add CDC NCM support")
Cc: stable@vger.kernel.org
Signed-off-by: Foster Snowhill <forst@pen.gy>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c219427ed2 upstream.
Originally, it was possible for the DPE length check to overflow if
wDatagramIndex + wDatagramLength > U16_MAX. This could lead to an OoB
read.
Move the wDatagramIndex term to the other side of the inequality.
An existing condition ensures that wDatagramIndex < urb->actual_length.
Fixes: a2d274c62e ("usbnet: ipheth: add CDC NCM support")
Cc: stable@vger.kernel.org
Signed-off-by: Foster Snowhill <forst@pen.gy>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 57af267d2b upstream.
Due to a limitation in available memory, the MT7916 firmware can only
handle either 5 GHz or 6 GHz at a time. It does not support runtime
switching without a full restart.
On older firmware, this accidentally worked to some degree due to missing
checks, but couldn't be supported properly, because it left the 6 GHz
channels uncalibrated.
Newer firmware refuses to start on either band if the passed EEPROM
data indicates support for both.
Deal with this limitation by using a module parameter to specify the
preferred band in case both are supported.
Fixes: b4d093e321 ("mt76: mt7915: add 6 GHz support")
Cc: stable@vger.kernel.org
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20241010083816.51880-1-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 68abd0c4eb upstream.
On removal of the device or unloading of the kernel module a potential NULL
pointer dereference occurs.
The following sequence deletes the interface:
brcmf_detach()
brcmf_remove_interface()
brcmf_del_if()
Inside the brcmf_del_if() function the drvr->if2bss[ifidx] is updated to
BRCMF_BSSIDX_INVALID (-1) if the bsscfgidx matches.
After brcmf_remove_interface() call the brcmf_proto_detach() function is
called providing the following sequence:
brcmf_detach()
brcmf_proto_detach()
brcmf_proto_msgbuf_detach()
brcmf_flowring_detach()
brcmf_msgbuf_delete_flowring()
brcmf_msgbuf_remove_flowring()
brcmf_flowring_delete()
brcmf_get_ifp()
brcmf_txfinalize()
Since brcmf_get_ip() can and actually will return NULL in this case the
call to brcmf_txfinalize() will result in a NULL pointer dereference inside
brcmf_txfinalize() when trying to update ifp->ndev->stats.tx_errors.
This will only happen if a flowring still has an skb.
Although the NULL pointer dereference has only been seen when trying to
update the tx statistic, all other uses of the ifp pointer have been
guarded as well with an early return if ifp is NULL.
Cc: stable@vger.kernel.org
Signed-off-by: Marcel Hamer <marcel.hamer@windriver.com>
Link: https://lore.kernel.org/all/b519e746-ddfd-421f-d897-7620d229e4b2@gmail.com/
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20250116132240.731039-1-marcel.hamer@windriver.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8a5b38c3fd upstream.
The hid-sensor-hub creates the individual device structs and transfers them
to the created mfd platform-devices via the platform_data in the mfd_cell.
Before e651a1da44 ("HID: hid-sensor-hub: Allow parallel synchronous reads")
the sensor-hub was managing access centrally, with one "completion" in the
hub's data structure, which needed to be finished on removal at the latest.
The mentioned commit then moved this central management to each hid sensor
device, resulting on a completion in each struct hid_sensor_hub_device.
The remove procedure was adapted to go through all sensor devices and
finish any pending "completion".
What this didn't take into account was, platform_device_add_data() that is
used by mfd_add{_hotplug}_devices() does a kmemdup on the submitted
platform-data. So the data the platform-device gets is a copy of the
original data, meaning that the device worked on a different completion
than what sensor_hub_remove() currently wants to access.
To fix that, use device_for_each_child() to go through each child-device
similar to how mfd_remove_devices() unregisters the devices later and
with that get the live platform_data to finalize the correct completion.
Fixes: e651a1da44 ("HID: hid-sensor-hub: Allow parallel synchronous reads")
Cc: stable@vger.kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Jiri Kosina <jkosina@suse.com>
Link: https://lore.kernel.org/r/20241107114712.538976-2-heiko@sntech.de
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 267b21d0be upstream.
According to DT spec, size of property 'alignment' is based on parent
node’s #size-cells property.
But __reserved_mem_alloc_size() wrongly uses @dt_root_addr_cells to get
the property obviously.
Fix by using @dt_root_size_cells instead of @dt_root_addr_cells.
Fixes: 3f0c820664 ("drivers: of: add initialization code for dynamic reserved memory")
Cc: stable@vger.kernel.org
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20250109-of_core_fix-v4-9-db8a72415b8c@quicinc.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b9e58c934c upstream.
of_find_node_opts_by_path() fails to find OF device node when its
@path parameter have pattern below:
"alias-name/node-name-1/.../node-name-N:options".
The reason is that alias name length calculated by the API is wrong, as
explained by example below:
"testcase-alias/phandle-tests/consumer-a:testaliasoption".
^ ^ ^
0 14 39
The right length of alias 'testcase-alias' is 14, but the result worked
out by the API is 39 which is obvious wrong.
Fix by using index of either '/' or ':' as the length who comes earlier.
Fixes: 75c28c09af ("of: add optional options parameter to of_find_node_by_path()")
Cc: stable@vger.kernel.org
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20241216-of_core_fix-v2-1-e69b8f60da63@quicinc.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e4c00c9b1f upstream.
API of_parse_phandle_with_args_map() will use wrong input for nexus node
Nexus_2 as shown below:
Node_1 Nexus_1 Nexus_2
&Nexus_1,arg_1 -> arg_1,&Nexus_2,arg_2' -> &Nexus_2,arg_2 -> arg_2,...
map-pass-thru=<...>
Nexus_1's output arg_2 should be used as input of Nexus_2, but the API
wrongly uses arg_2' instead which != arg_2 due to Nexus_1's map-pass-thru.
Fix by always making @match_array point to @initial_match_array into
which to store nexus output.
Fixes: bd6f2fd5a1 ("of: Support parsing phandle argument lists through a nexus node")
Cc: stable@vger.kernel.org
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20250109-of_core_fix-v4-1-db8a72415b8c@quicinc.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1b3e2d4ec0 upstream.
According to the UFS Device Specification, the dExtendedUFSFeaturesSupport
defines the support for TOO_HIGH_TEMPERATURE as bit[4] and the
TOO_LOW_TEMPERATURE as bit[5]. Correct the code to match with
the UFS device specification definition.
Cc: stable@vger.kernel.org
Fixes: e88e2d3220 ("scsi: ufs: core: Probe for temperature notification support")
Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Link: https://lore.kernel.org/r/69992b3e3e3434a5c7643be5a64de48be892ca46.1736793068.git.quic_nguyenb@quicinc.com
Reviewed-by: Avri Altman <Avri.Altman@wdc.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 62892e77b8 upstream.
The comparison function cmpworker() violates the C standard's
requirements for qsort() comparison functions, which mandate symmetry
and transitivity:
Symmetry: If x < y, then y > x.
Transitivity: If x < y and y < z, then x < z.
In its current implementation, cmpworker() incorrectly returns 0 when
w1->tid < w2->tid, which breaks both symmetry and transitivity. This
violation causes undefined behavior, potentially leading to issues such
as memory corruption in glibc [1].
Fix the issue by returning -1 when w1->tid < w2->tid, ensuring
compliance with the C standard and preventing undefined behavior.
Link: https://www.qualys.com/2024/01/30/qsort.txt [1]
Fixes: 121dd9ea01 ("perf bench: Add epoll parallel epoll_wait benchmark")
Cc: stable@vger.kernel.org
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250116110842.4087530-1-visitorckw@gmail.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8ba14d9f49 upstream.
GCC 15 changed the default C standard version to C23, which should not
have impacted the kernel because it requests the gnu11 standard via
'-std=' in the main Makefile. However, the EFI libstub Makefile uses its
own set of KBUILD_CFLAGS for x86 without a '-std=' value (i.e., using
the default), resulting in errors from the kernel's definitions of bool,
true, and false in stddef.h, which are reserved keywords under C23.
./include/linux/stddef.h:11:9: error: expected identifier before ‘false’
11 | false = 0,
./include/linux/types.h:35:33: error: two or more data types in declaration specifiers
35 | typedef _Bool bool;
Set '-std=gnu11' in the x86 cflags to resolve the error and consistently
use the same C standard version for the entire kernel. All other
architectures reuse KBUILD_CFLAGS from the rest of the kernel, so this
issue is not visible for them.
Cc: stable@vger.kernel.org
Reported-by: Kostadin Shishmanov <kostadinshishmanov@protonmail.com>
Closes: https://lore.kernel.org/4OAhbllK7x4QJGpZjkYjtBYNLd_2whHx9oFiuZcGwtVR4hIzvduultkgfAIRZI3vQpZylu7Gl929HaYFRGeMEalWCpeMzCIIhLxxRhq4U-Y=@protonmail.com/
Reported-by: Jakub Jelinek <jakub@redhat.com>
Closes: https://lore.kernel.org/Z4467umXR2PZ0M1H@tucnak/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d1248436cb upstream.
blkcg_fill_root_iostats() iterates over @block_class's devices by
class_dev_iter_(init|next)(), but does not end iterating with
class_dev_iter_exit(), so causes the class's subsystem refcount leakage.
Fix by ending the iterating with class_dev_iter_exit().
Fixes: ef45fe470e ("blk-cgroup: show global disk stats in root cgroup io.stat")
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20250105-class_fix-v6-2-3a2f1768d4d4@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 67aea188f2 upstream.
Add dummy clk which was missed during the conversion to
mtk_clk_pdev_probe() and is required for the existing DT bindings to
keep working.
Fixes: 65c10c50c9 ("clk: mediatek: Migrate to mtk_clk_pdev_probe() for multimedia clocks")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/9de23440fcba1ffef9e77d58c9f505105e57a250.1734300668.git.daniel@makrotopia.org
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 366640868c upstream.
Add dummy clk for index 0 which was missed during the conversion to
mtk_clk_simple_probe().
Fixes: 973d1607d9 ("clk: mediatek: mt2701: use mtk_clk_simple_probe to simplify driver")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/d677486a5c563fe5c47aa995841adc2aaa183b8a.1734300668.git.daniel@makrotopia.org
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fd291adc5e upstream.
Add dummy clk for index 0 which was missed during the conversion to
mtk_clk_simple_probe().
Fixes: 973d1607d9 ("clk: mediatek: mt2701: use mtk_clk_simple_probe to simplify driver")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/b8526c882a50f2b158df0eccb4a165956fd8fa13.1734300668.git.daniel@makrotopia.org
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5fba40be5f upstream.
Some of the audio subsystem clocks defined in clk-mt2701.h aren't
actually used by the driver. This broke conversion to
mtk_clk_simple_probe which expects that the highest possible clk id is
defined by the ARRAY_SIZE.
Add additional dummy clocks to fill the gaps and remain compatible with
the existing DT bindings.
Fixes: 0f69a423c4 ("clk: mediatek: Switch to mtk_clk_simple_probe() where possible")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/a07584d803af57b9ce4b5df5e122c09bf5a56ac9.1734300668.git.daniel@makrotopia.org
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7c8746126a upstream.
Commit 973d1607d9 ("clk: mediatek: mt2701: use mtk_clk_simple_probe to
simplify driver") broke DT bindings as the highest index was reduced by
1 because the id count starts from 1 and not from 0.
Fix this, like for other drivers which had the same issue, by adding a
dummy clk at index 0.
Fixes: 973d1607d9 ("clk: mediatek: mt2701: use mtk_clk_simple_probe to simplify driver")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/b126a5577f3667ef19b1b5feea5e70174084fb03.1734300668.git.daniel@makrotopia.org
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 89aa5925d2 upstream.
aggr_state and unit fields are u32. The result of their
multiplication may not fit in this type.
Add explicit casting to prevent overflow.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 04053f4d23 ("clk: qcom: clk-rpmh: Add IPA clock support")
Cc: stable@vger.kernel.org # 5.4+
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Link: https://lore.kernel.org/r/20241203084231.6001-1-abelova@astralinux.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d4cdb196f1 upstream.
If a clk_rcg2 has a parent, it should also have parent_map defined,
otherwise we'll get a NULL pointer dereference when calling clk_set_rate
like the following:
[ 3.388105] Call trace:
[ 3.390664] qcom_find_src_index+0x3c/0x70 (P)
[ 3.395301] qcom_find_src_index+0x1c/0x70 (L)
[ 3.399934] _freq_tbl_determine_rate+0x48/0x100
[ 3.404753] clk_rcg2_determine_rate+0x1c/0x28
[ 3.409387] clk_core_determine_round_nolock+0x58/0xe4
[ 3.421414] clk_core_round_rate_nolock+0x48/0xfc
[ 3.432974] clk_core_round_rate_nolock+0xd0/0xfc
[ 3.444483] clk_core_set_rate_nolock+0x8c/0x300
[ 3.455886] clk_set_rate+0x38/0x14c
Add the parent_map property for the clock where it's missing and also
un-inline the parent_data as well to keep the matching parent_map and
parent_data together.
Fixes: 837519775f ("clk: qcom: Add display clock controller driver for SM6350")
Cc: stable@vger.kernel.org
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241220-sm6350-parent_map-v1-2-64f3d04cb2eb@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 96fe1a7ee4 upstream.
If a clk_rcg2 has a parent, it should also have parent_map defined,
otherwise we'll get a NULL pointer dereference when calling clk_set_rate
like the following:
[ 3.388105] Call trace:
[ 3.390664] qcom_find_src_index+0x3c/0x70 (P)
[ 3.395301] qcom_find_src_index+0x1c/0x70 (L)
[ 3.399934] _freq_tbl_determine_rate+0x48/0x100
[ 3.404753] clk_rcg2_determine_rate+0x1c/0x28
[ 3.409387] clk_core_determine_round_nolock+0x58/0xe4
[ 3.421414] clk_core_round_rate_nolock+0x48/0xfc
[ 3.432974] clk_core_round_rate_nolock+0xd0/0xfc
[ 3.444483] clk_core_set_rate_nolock+0x8c/0x300
[ 3.455886] clk_set_rate+0x38/0x14c
Add the parent_map property for two clocks where it's missing and also
un-inline the parent_data as well to keep the matching parent_map and
parent_data together.
Fixes: 131abae905 ("clk: qcom: Add SM6350 GCC driver")
Cc: stable@vger.kernel.org
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241220-sm6350-parent_map-v1-1-64f3d04cb2eb@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
