commit e94dc6ddda upstream.
The hardware limitation "max=19" actually comes from SMMU Command Queue.
So, it'd be more natural for tegra241-cmdqv driver to read it out rather
than hardcoding it itself.
This is not an issue yet for a kernel on a baremetal system, but a guest
kernel setting the queue base/size in form of IPA/gPA might result in a
noncontiguous queue in the physical address space, if underlying physical
pages backing up the guest RAM aren't contiguous entirely: e.g. 2MB-page
backed guest RAM cannot guarantee a contiguous queue if it is 8MB (capped
to VCMDQ_LOG2SIZE_MAX=19). This might lead to command errors when HW does
linear-read from a noncontiguous queue memory.
Adding this extra IDR1.CMDQS cap (in the guest kernel) allows VMM to set
SMMU's IDR1.CMDQS=17 for the case mentioned above, so a guest-level queue
will be capped to maximum 2MB, ensuring a contiguous queue memory.
Fixes: a3799717b8 ("iommu/tegra241-cmdqv: Fix alignment failure at max_n_shift")
Reported-by: Ian Kalinowski <ikalinowski@nvidia.com>
Cc: stable@vger.kernel.org
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/20241219051421.1850267-1-nicolinc@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ab09c6cfe0 upstream.
The channel index is off by one unit if AS73211_SCAN_MASK_ALL is not
set (optimized path for color channel readings), and it must be shifted
instead of leaving an empty channel for the temperature when it is off.
Once the channel index is fixed, the uninitialized channel must be set
to zero to avoid pushing uninitialized data.
Add available_scan_masks for all channels and only-color channels to let
the IIO core demux and repack the enabled channels.
Cc: stable@vger.kernel.org
Fixes: 403e5586b5 ("iio: light: as73211: New driver")
Tested-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241214-iio_memset_scan_holes-v4-1-260b395b8ed5@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 58db7c5fbe upstream.
Patch series "mm/hugetlb: Refactor hugetlb allocation resv accounting",
v2.
This is a follow up on Ackerley's series here as replacement:
https://lore.kernel.org/r/cover.1728684491.git.ackerleytng@google.com
The goal of this series is to cleanup hugetlb resv accounting, especially
during folio allocation, to decouple a few things:
- Hugetlb folios v.s. Hugetlbfs: IOW, the hope is in the future hugetlb
folios can be allocated completely without hugetlbfs.
- Decouple VMA v.s. hugetlb folio allocations: allocating a hugetlb folio
should not always require a hugetlbfs VMA. For example, either it got
allocated from the inode level (see hugetlbfs_fallocate() where it used
a pesudo VMA for allocation), or it can be allocated by other kernel
subsystems.
It paves way for other users to allocate hugetlb folios out of either
system reservations, or subpools (instead of hugetlbfs, as a file system).
For longer term, this prepares hugetlb as a separate concept versus
hugetlbfs, so that hugetlb folios can be allocated by not only hugetlbfs
and other things.
Tests I've done:
- I had a reproducer in patch 1 for the bug I found, this will start to
work after patch 1 or the whole set applied.
- Hugetlb regression tests (on x86_64 2MBs), includes:
- All vmtests on hugetlbfs
- libhugetlbfs test suite (which may fail some tests, but no new failures
will be introduced by this series, so all such failures happen before
this series so shouldn't be relevant).
This patch (of 7):
Since commit 04f2cbe356 ("hugetlb: guarantee that COW faults for a
process that called mmap(MAP_PRIVATE) on hugetlbfs will succeed"),
avoid_reserve was introduced for a special case of CoW on hugetlb private
mappings, and only if the owner VMA is trying to allocate yet another
hugetlb folio that is not reserved within the private vma reserved map.
Later on, in commit d85f69b0b5 ("mm/hugetlb: alloc_huge_page handle
areas hole punched by fallocate"), alloc_huge_page() enforced to not
consume any global reservation as long as avoid_reserve=true. This
operation doesn't look correct, because even if it will enforce the
allocation to not use global reservation at all, it will still try to take
one reservation from the spool (if the subpool existed). Then since the
spool reserved pages take from global reservation, it'll also take one
reservation globally.
Logically it can cause global reservation to go wrong.
I wrote a reproducer below, trigger this special path, and every run of
such program will cause global reservation count to increment by one, until
it hits the number of free pages:
#define _GNU_SOURCE /* See feature_test_macros(7) */
#include <stdio.h>
#include <fcntl.h>
#include <errno.h>
#include <unistd.h>
#include <stdlib.h>
#include <sys/mman.h>
#define MSIZE (2UL << 20)
int main(int argc, char *argv[])
{
const char *path;
int *buf;
int fd, ret;
pid_t child;
if (argc < 2) {
printf("usage: %s <hugetlb_file>\n", argv[0]);
return -1;
}
path = argv[1];
fd = open(path, O_RDWR | O_CREAT, 0666);
if (fd < 0) {
perror("open failed");
return -1;
}
ret = fallocate(fd, 0, 0, MSIZE);
if (ret != 0) {
perror("fallocate");
return -1;
}
buf = mmap(NULL, MSIZE, PROT_READ|PROT_WRITE,
MAP_PRIVATE, fd, 0);
if (buf == MAP_FAILED) {
perror("mmap() failed");
return -1;
}
/* Allocate a page */
*buf = 1;
child = fork();
if (child == 0) {
/* child doesn't need to do anything */
exit(0);
}
/* Trigger CoW from owner */
*buf = 2;
munmap(buf, MSIZE);
close(fd);
unlink(path);
return 0;
}
It can only reproduce with a sub-mount when there're reserved pages on the
spool, like:
# sysctl vm.nr_hugepages=128
# mkdir ./hugetlb-pool
# mount -t hugetlbfs -o min_size=8M,pagesize=2M none ./hugetlb-pool
Then run the reproducer on the mountpoint:
# ./reproducer ./hugetlb-pool/test
Fix it by taking the reservation from spool if available. In general,
avoid_reserve is IMHO more about "avoid vma resv map", not spool's.
I copied stable, however I have no intention for backporting if it's not a
clean cherry-pick, because private hugetlb mapping, and then fork() on top
is too rare to hit.
Link: https://lkml.kernel.org/r/20250107204002.2683356-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20250107204002.2683356-2-peterx@redhat.com
Fixes: d85f69b0b5 ("mm/hugetlb: alloc_huge_page handle areas hole punched by fallocate")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Tested-by: Ackerley Tng <ackerleytng@google.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Breno Leitao <leitao@debian.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit da73efa8e6 upstream.
ccs_data_parse() releases the allocated in-memory data structure when the
parser fails, but it does not clean up parsed metadata that is there to
help access the actual data. Do that, in order to return the data
structure in a sane state.
Fixes: a6b396f410 ("media: ccs: Add CCS static data parser library")
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e64f81946a upstream.
On NUMA systems, __GFP_THISNODE indicates that an allocation _must_ be on
a particular node, and failure to allocate on the desired node will result
in a failed allocation.
Skip __GFP_THISNODE allocations if we are running on a NUMA system, since
KFENCE can't guarantee which node its pool pages are allocated on.
Link: https://lkml.kernel.org/r/20250124120145.410066-1-elver@google.com
Fixes: 236e9f1538 ("kfence: skip all GFP_ZONEMASK allocations")
Signed-off-by: Marco Elver <elver@google.com>
Reported-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Chistoph Lameter <cl@linux.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 53dac34539 upstream.
hrtimers are migrated away from the dying CPU to any online target at
the CPUHP_AP_HRTIMERS_DYING stage in order not to delay bandwidth timers
handling tasks involved in the CPU hotplug forward progress.
However wakeups can still be performed by the outgoing CPU after
CPUHP_AP_HRTIMERS_DYING. Those can result again in bandwidth timers being
armed. Depending on several considerations (crystal ball power management
based election, earliest timer already enqueued, timer migration enabled or
not), the target may eventually be the current CPU even if offline. If that
happens, the timer is eventually ignored.
The most notable example is RCU which had to deal with each and every of
those wake-ups by deferring them to an online CPU, along with related
workarounds:
_ e787644caf (rcu: Defer RCU kthreads wakeup when CPU is dying)
_ 9139f93209 (rcu/nocb: Fix RT throttling hrtimer armed from offline CPU)
_ f7345ccc62 (rcu/nocb: Fix rcuog wake-up from offline softirq)
The problem isn't confined to RCU though as the stop machine kthread
(which runs CPUHP_AP_HRTIMERS_DYING) reports its completion at the end
of its work through cpu_stop_signal_done() and performs a wake up that
eventually arms the deadline server timer:
WARNING: CPU: 94 PID: 588 at kernel/time/hrtimer.c:1086 hrtimer_start_range_ns+0x289/0x2d0
CPU: 94 UID: 0 PID: 588 Comm: migration/94 Not tainted
Stopper: multi_cpu_stop+0x0/0x120 <- stop_machine_cpuslocked+0x66/0xc0
RIP: 0010:hrtimer_start_range_ns+0x289/0x2d0
Call Trace:
<TASK>
start_dl_timer
enqueue_dl_entity
dl_server_start
enqueue_task_fair
enqueue_task
ttwu_do_activate
try_to_wake_up
complete
cpu_stopper_thread
Instead of providing yet another bandaid to work around the situation, fix
it in the hrtimers infrastructure instead: always migrate away a timer to
an online target whenever it is enqueued from an offline CPU.
This will also allow to revert all the above RCU disgraceful hacks.
Fixes: 5c0930ccaa ("hrtimers: Push pending hrtimers away from outgoing CPU earlier")
Reported-by: Vlad Poenaru <vlad.wing@gmail.com>
Reported-by: Usama Arif <usamaarif642@gmail.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/all/20250117232433.24027-1-frederic@kernel.org
Closes: 20241213203739.1519801-1-usamaarif642@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8259cb14a7 upstream.
RV per-task monitors are implemented through a monitor structure
available for each task_struct. This structure is reset every time the
monitor is (re-)started, to avoid inconsistencies if the monitor was
activated previously.
To do so, we reset the monitor on all threads using the macro
for_each_process_thread. However, this macro excludes the idle tasks on
each CPU. Idle tasks could be considered tasks on their own right and it
should be up to the model whether to ignore them or not.
Reset monitors also on the idle tasks for each present CPU whenever we
reset all per-task monitors.
Cc: stable@vger.kernel.org
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Kacur <jkacur@redhat.com>
Link: https://lore.kernel.org/20250115151547.605750-2-gmonaco@redhat.com
Fixes: 792575348f ("rv/include: Add deterministic automata monitor definition via C macros")
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f2bc2afe34 upstream.
pm_runtime_resume_and_get() sets dev->power.runtime_error that causes
all subsequent pm_runtime_get_sync() calls to fail.
Clear the runtime_error using pm_runtime_set_suspended(), so the driver
doesn't have to be reloaded to recover when the NPU fails to boot during
runtime resume.
Fixes: 7d4b4c7443 ("accel/ivpu: Remove suspend_reschedule_counter")
Cc: stable@vger.kernel.org # v6.11+
Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129124009.1039982-3-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 26b63bee2f upstream.
In xfs_inactive(), xfs_reflink_cancel_cow_range() is called
without error handling, risking unnoticed failures and
inconsistent behavior compared to other parts of the code.
Fix this issue by adding an error handling for the
xfs_reflink_cancel_cow_range(), improving code robustness.
Fixes: 6231848c3a ("xfs: check for cow blocks before trying to clear them")
Cc: stable@vger.kernel.org # v4.17
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fb95897b8c upstream.
In xfs_dax_write_iomap_end(), directly return the result of
xfs_reflink_cancel_cow_range() when !written, ensuring proper
error propagation and improving code robustness.
Fixes: ea6c49b784 ("xfs: support CoW in fsdax mode")
Cc: stable@vger.kernel.org # v6.0
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f5f0ed89f1 upstream.
The XFS_IOC_EXCHANGE_RANGE ioctl with the XFS_EXCHANGE_RANGE_TO_EOF flag
operates on a range bounded by the end of the file. This means the
actual amount of blocks exchanged is derived from the inode size, which
is only stable with the IOLOCK (i_rwsem) held. Do that, it currently
calls remap_verify_area from inside the sb write protection which nests
outside the IOLOCK. But this makes fsnotify_file_area_perm which is
called from remap_verify_area unhappy when the kernel is built with
lockdep and the recently added CONFIG_FANOTIFY_ACCESS_PERMISSIONS
option.
Fix this by always calling remap_verify_area before taking the write
protection, and passing a 0 size to remap_verify_area similar to
the FICLONE/FICLONERANGE ioctls when they are asked to clone until
the file end.
(Note: the size argument gets passed to fsnotify_file_area_perm, but
then isn't actually used there).
Fixes: 9a64d9b310 ("xfs: introduce new file range exchange ioctl")
Cc: <stable@vger.kernel.org> # v6.10
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 752b6e3af3 upstream.
In mchp_core_pwm_apply_locked(), if hw_period_steps is equal to its max,
an error is reported and .apply fails. The max value is actually a
permitted value however, and so this check can fail where multiple
channels are enabled.
For example, the first channel to be configured requests a period that
sets hw_period_steps to the maximum value, and when a second channel
is enabled the driver reads hw_period_steps back from the hardware and
finds it to be the maximum possible value, triggering the warning on a
permitted value. The value to be avoided is 255 (PERIOD_STEPS_MAX + 1),
as that will produce undesired behaviour, so test for greater than,
rather than equal to.
Fixes: 2bf7ecf7b4 ("pwm: add microchip soft ip corePWM driver")
Cc: stable@vger.kernel.org
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250122-pastor-fancied-0b993da2d2d2@spud
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a5e6fc0a10 upstream.
Access to safety cluster engine (SCE) fabric registers was blocked
by firewall after the introduction of Functional Safety Island in
Tegra234. After that, any access by software to SCE registers is
correctly resulting in the internal bus error. However, when CPUs
try accessing the SCE-fabric registers to print error info,
another firewall error occurs as the fabric registers are also
firewall protected. This results in a second error to be printed.
Disable the SCE fabric node to avoid printing the misleading error.
The first error info will be printed by the interrupt from the
fabric causing the actual access.
Cc: stable@vger.kernel.org
Fixes: 302e154000 ("arm64: tegra: Add node for CBB 2.0 on Tegra234")
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Ivy Huang <yijuh@nvidia.com>
Reviewed-by: Brad Griffis <bgriffis@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20241218000737.1789569-3-yijuh@nvidia.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 604120fd9e upstream.
The compatible string for the Tegra DCE fabric is currently defined as
'nvidia,tegra234-sce-fabric' but this is incorrect because this is the
compatible string for SCE fabric. Update the compatible for the DCE
fabric to correct the compatible string.
This compatible needs to be correct in order for the interconnect
to catch things such as improper data accesses.
Cc: stable@vger.kernel.org
Fixes: 302e154000 ("arm64: tegra: Add node for CBB 2.0 on Tegra234")
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Ivy Huang <yijuh@nvidia.com>
Reviewed-by: Brad Griffis <bgriffis@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20241218000737.1789569-2-yijuh@nvidia.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 49b9258b05 upstream.
As QCE is an order of magnitude slower than the ARMv8 Crypto Extensions
on the CPU, and is also less well tested, give it a lower priority.
Previously the QCE SHA algorithms had higher priority than the ARMv8 CE
equivalents, and the ciphers such as AES-XTS had the same priority which
meant the QCE versions were chosen if they happened to be loaded later.
Fixes: ec8f5d8f6f ("crypto: qce - Qualcomm crypto engine driver")
Cc: stable@vger.kernel.org
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Thara Gopinath <thara.gopinath@gmail.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9fa33cbca3 upstream.
SM8650 lists two interconnects for the display subsystem, mdp0-mem
(between MDP and LLCC) and mdp1-mem (between LLCC and EBI, memory).
The second interconnect is a misuse. mdpN-mem paths should be used for
several outboud MDP interconnects rather than the path between LLCC and
memory. This kind of misuse can result in bandwidth underflows, possibly
degrading picture quality as the required memory bandwidth is divided
between all mdpN-mem paths (and LLCC-EBI should not be a part of such
division).
Drop the second path and use direct MDP-EBI path for mdp0-mem until we
support separate MDP-LLCC and LLCC-EBI paths.
Fixes: 10e0246712 ("arm64: dts: qcom: sm8650: add interconnect dependent device nodes")
Cc: stable@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241026-fix-sm8x50-mdp-icc-v2-2-fd8ddf755acc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b8591df49c upstream.
SM8550 lists two interconnects for the display subsystem, mdp0-mem
(between MDP and LLCC) and mdp1-mem (between LLCC and EBI, memory).
The second interconnect is a misuse. mdpN-mem paths should be used for
several outboud MDP interconnects rather than the path between LLCC and
memory. This kind of misuse can result in bandwidth underflows, possibly
degrading picture quality as the required memory bandwidth is divided
between all mdpN-mem paths (and LLCC-EBI should not be a part of such
division).
Drop the second path and use direct MDP-EBI path for mdp0-mem until we
support separate MDP-LLCC and LLCC-EBI paths.
Fixes: d7da51db5b ("arm64: dts: qcom: sm8550: add display hardware devices")
Cc: stable@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241026-fix-sm8x50-mdp-icc-v2-1-fd8ddf755acc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d4fa87daf3 upstream.
The address space in MPSS/Modem PAS (Peripheral Authentication Service)
remoteproc node should point to the QDSP PUB address space
(QDSP6...SS_PUB) which has a length of 0x10000. Value of 0x4040 was
copied from older DTS, but it grew since then.
This should have no functional impact on Linux users, because PAS loader
does not use this address space at all.
Fixes: 10e0246712 ("arm64: dts: qcom: sm8650: add interconnect dependent device nodes")
Cc: stable@vger.kernel.org
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241213-dts-qcom-cdsp-mpss-base-address-v3-12-2e0036fccd8d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aca0053f05 upstream.
The address space in CDSP PAS (Peripheral Authentication Service)
remoteproc node should point to the QDSP PUB address space
(QDSP6...SS_PUB) which has a length of 0x10000. Value of 0x1400000 was
copied from older DTS, but it does not look accurate at all.
This should have no functional impact on Linux users, because PAS loader
does not use this address space at all.
Fixes: 10e0246712 ("arm64: dts: qcom: sm8650: add interconnect dependent device nodes")
Cc: stable@vger.kernel.org
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241213-dts-qcom-cdsp-mpss-base-address-v3-11-2e0036fccd8d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b6ddc5c373 upstream.
The address space in ADSP PAS (Peripheral Authentication Service)
remoteproc node should point to the QDSP PUB address space
(QDSP6...SS_PUB): 0x0680_0000 with length of 0x10000.
0x3000_0000, value used so far, is the main region of CDSP. Downstream
DTS uses 0x0300_0000, which is oddly similar to 0x3000_0000, yet quite
different and points to unused area.
Correct the base address and length, which also moves the node to
different place to keep things sorted by unit address. The diff looks
big, but only the unit address and "reg" property were changed. This
should have no functional impact on Linux users, because PAS loader does
not use this address space at all.
Fixes: 10e0246712 ("arm64: dts: qcom: sm8650: add interconnect dependent device nodes")
Cc: stable@vger.kernel.org
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241213-dts-qcom-cdsp-mpss-base-address-v3-10-2e0036fccd8d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8ef227e93a upstream.
The address space in MPSS/Modem PAS (Peripheral Authentication Service)
remoteproc node should point to the QDSP PUB address space
(QDSP6...SS_PUB) which has a length of 0x10000. Value of 0x4040 was
copied from older DTS, but it grew since then.
This should have no functional impact on Linux users, because PAS loader
does not use this address space at all.
Fixes: d0c061e366 ("arm64: dts: qcom: sm8550: add adsp, cdsp & mdss nodes")
Cc: stable@vger.kernel.org
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241213-dts-qcom-cdsp-mpss-base-address-v3-9-2e0036fccd8d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6b2570e1e4 upstream.
The address space in CDSP PAS (Peripheral Authentication Service)
remoteproc node should point to the QDSP PUB address space
(QDSP6...SS_PUB) which has a length of 0x10000. Value of 0x1400000 was
copied from older DTS, but it does not look accurate at all.
This should have no functional impact on Linux users, because PAS loader
does not use this address space at all.
Fixes: d0c061e366 ("arm64: dts: qcom: sm8550: add adsp, cdsp & mdss nodes")
Cc: stable@vger.kernel.org
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241213-dts-qcom-cdsp-mpss-base-address-v3-8-2e0036fccd8d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a6a8f54bc2 upstream.
The address space in ADSP PAS (Peripheral Authentication Service)
remoteproc node should point to the QDSP PUB address space
(QDSP6...SS_PUB): 0x0680_0000 with length of 0x10000.
0x3000_0000, value used so far, is the main region of CDSP. Downstream
DTS uses 0x0300_0000, which is oddly similar to 0x3000_0000, yet quite
different and points to unused area.
Correct the base address and length, which also moves the node to
different place to keep things sorted by unit address. The diff looks
big, but only the unit address and "reg" property were changed. This
should have no functional impact on Linux users, because PAS loader does
not use this address space at all.
Fixes: d0c061e366 ("arm64: dts: qcom: sm8550: add adsp, cdsp & mdss nodes")
Cc: stable@vger.kernel.org
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241213-dts-qcom-cdsp-mpss-base-address-v3-7-2e0036fccd8d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fa6442e87a upstream.
The address space in MPSS/Modem PAS (Peripheral Authentication Service)
remoteproc node should point to the QDSP PUB address space
(QDSP6...SS_PUB) which has a length of 0x10000. Value of 0x4040 was
copied from older DTS, but it grew since then.
This should have no functional impact on Linux users, because PAS loader
does not use this address space at all.
Fixes: 1172729576 ("arm64: dts: qcom: sm8450: Add remoteproc enablers and instances")
Cc: stable@vger.kernel.org
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241213-dts-qcom-cdsp-mpss-base-address-v3-6-2e0036fccd8d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3751fe2cba upstream.
The address space in CDSP PAS (Peripheral Authentication Service)
remoteproc node should point to the QDSP PUB address space
(QDSP6...SS_PUB) which has a length of 0x10000. Value of 0x1400000 was
copied from older DTS, but it does not look accurate at all.
This should have no functional impact on Linux users, because PAS loader
does not use this address space at all.
Fixes: 1172729576 ("arm64: dts: qcom: sm8450: Add remoteproc enablers and instances")
Cc: stable@vger.kernel.org
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241213-dts-qcom-cdsp-mpss-base-address-v3-5-2e0036fccd8d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 13c96bee5d upstream.
The address space in ADSP PAS (Peripheral Authentication Service)
remoteproc node should point to the QDSP PUB address space
(QDSP6...SS_PUB): 0x0300_0000 with length of 0x10000, which also matches
downstream DTS. 0x3000_0000, value used so far, was in datasheet is the
region of CDSP.
Correct the base address and length, which also moves the node to
different place to keep things sorted by unit address. The diff looks
big, but only the unit address and "reg" property were changed. This
should have no functional impact on Linux users, because PAS loader does
not use this address space at all.
Fixes: 1172729576 ("arm64: dts: qcom: sm8450: Add remoteproc enablers and instances")
Cc: stable@vger.kernel.org
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241213-dts-qcom-cdsp-mpss-base-address-v3-4-2e0036fccd8d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit da1937dec9 upstream.
The address space in MPSS/Modem PAS (Peripheral Authentication Service)
remoteproc node should point to the QDSP PUB address space
(QDSP6...SS_PUB) which has a length of 0x10000. Value of 0x4040 was
copied from older DTS, but it grew since then.
This should have no functional impact on Linux users, because PAS loader
does not use this address space at all.
Fixes: 177fcf0aed ("arm64: dts: qcom: sm8350: Add remoteprocs")
Cc: stable@vger.kernel.org
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241213-dts-qcom-cdsp-mpss-base-address-v3-3-2e0036fccd8d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f4afd8ba45 upstream.
The address space in CDSP PAS (Peripheral Authentication Service)
remoteproc node should point to the QDSP PUB address space
(QDSP6...SS_PUB): 0x0a30_0000 with length of 0x10000. 0x9890_0000,
value used so far, was copied from downstream DTS, is in the middle of
RAM/DDR space and downstream DTS describes the PIL loader, which is a
bit different interface. Datasheet says that one of the main CDSP
address spaces is 0x0980_0000, which is oddly similar to 0x9890_0000,
but quite different.
Assume existing value (thus downstream DTS) is not really describing the
intended CDSP PAS region.
Correct the base address and length, which also moves the node to
different place to keep things sorted by unit address. The diff looks
big, but only the unit address and "reg" property were changed. This
should have no functional impact on Linux users, because PAS loader does
not use this address space at all.
Fixes: 177fcf0aed ("arm64: dts: qcom: sm8350: Add remoteprocs")
Cc: stable@vger.kernel.org
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241213-dts-qcom-cdsp-mpss-base-address-v3-2-2e0036fccd8d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f9ba85566d upstream.
The address space in ADSP PAS (Peripheral Authentication Service)
remoteproc node should point to the QDSP PUB address space
(QDSP6...SS_PUB): 0x0300_0000 with length of 0x10000. 0x1730_0000,
value used so far, was copied from downstream DTS, is in the middle of
unused space and downstream DTS describes the PIL loader, which is a bit
different interface.
Assume existing value (thus downstream DTS) is not really describing the
intended ADSP PAS region.
Correct the base address and length, which also moves the node to
different place to keep things sorted by unit address. The diff looks
big, but only the unit address and "reg" property were changed. This
should have no functional impact on Linux users, because PAS loader does
not use this address space at all.
Fixes: 177fcf0aed ("arm64: dts: qcom: sm8350: Add remoteprocs")
Cc: stable@vger.kernel.org
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241213-dts-qcom-cdsp-mpss-base-address-v3-1-2e0036fccd8d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 918e71ba0c upstream.
The address space in MPSS/Modem PAS (Peripheral Authentication Service)
remoteproc node should point to the QDSP PUB address space
(QDSP6...SS_PUB): 0x0608_0000 with length of 0x10000.
0x0600_0000, value used so far, is the main region of Modem.
Correct the base address and length, which should have no functional
impact on Linux users, because PAS loader does not use this address
space at all.
Fixes: 31cc61104f ("arm64: dts: qcom: sm6375: Add modem nodes")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241213-dts-qcom-cdsp-mpss-base-address-v3-19-2e0036fccd8d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c9f7f341e8 upstream.
The address space in CDSP PAS (Peripheral Authentication Service)
remoteproc node should point to the QDSP PUB address space
(QDSP6...SS_PUB): 0x0b30_0000 with length of 0x10000.
0x0b00_0000, value used so far, is the main region of CDSP.
Correct the base address and length, which should have no functional
impact on Linux users, because PAS loader does not use this address
space at all.
Fixes: fe6fd26aed ("arm64: dts: qcom: sm6375: Add ADSP&CDSP")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241213-dts-qcom-cdsp-mpss-base-address-v3-18-2e0036fccd8d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bf4dda83da upstream.
The address space in ADSP (Peripheral Authentication Service) remoteproc
node should point to the QDSP PUB address space (QDSP6...SS_PUB) which
has a length of 0x10000.
This should have no functional impact on Linux users, because PAS loader
does not use this address space at all.
Fixes: fe6fd26aed ("arm64: dts: qcom: sm6375: Add ADSP&CDSP")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241213-dts-qcom-cdsp-mpss-base-address-v3-17-2e0036fccd8d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit be2f81eaa2 upstream.
The path MASTER_QUP_0 to SLAVE_EBI_CH0 would be qup-memory path and not
qup-config. Since the qup-memory path is not part of the qcom,geni-uart
bindings, just replace that path with the correct path for qup-config.
Fixes: b179f35b88 ("arm64: dts: qcom: sm6350: add uart1 node")
Cc: stable@vger.kernel.org
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241220-sm6350-uart1-icc-v1-1-f4f10fd91adf@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cd8d83de9c upstream.
The address space in MPSS/Modem PAS (Peripheral Authentication Service)
remoteproc node should point to the QDSP PUB address space
(QDSP6...SS_PUB) which has a length of 0x10000. Value of 0x4040 was
copied from older DTS, but it grew since then.
This should have no functional impact on Linux users, because PAS loader
does not use this address space at all.
Fixes: 489be59b63 ("arm64: dts: qcom: sm6350: Add MPSS nodes")
Cc: stable@vger.kernel.org
Tested-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241213-dts-qcom-cdsp-mpss-base-address-v3-16-2e0036fccd8d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b0805a8644 upstream.
The address space in ADSP (Peripheral Authentication Service) remoteproc
node should point to the QDSP PUB address space (QDSP6...SS_PUB) which
has a length of 0x10000.
This should have no functional impact on Linux users, because PAS loader
does not use this address space at all.
Fixes: efc33c969f ("arm64: dts: qcom: sm6350: Add ADSP nodes")
Cc: stable@vger.kernel.org
Tested-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241213-dts-qcom-cdsp-mpss-base-address-v3-15-2e0036fccd8d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 47d178caac upstream.
The address space in ADSP PAS (Peripheral Authentication Service)
remoteproc node should point to the QDSP PUB address space
(QDSP6...SS_PUB): 0x0a40_0000 with length of 0x4040.
0x0ab0_0000, value used so far, is the SSC_QUPV3 block, so entierly
unrelated.
Correct the base address and length, which should have no functional
impact on Linux users, because PAS loader does not use this address
space at all.
Cc: stable@vger.kernel.org
Fixes: 96ce9227fd ("arm64: dts: qcom: sm6115: Add remoteproc nodes")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241213-dts-qcom-cdsp-mpss-base-address-v3-23-2e0036fccd8d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 846f49c3f0 upstream.
The address space in MPSS/Modem PAS (Peripheral Authentication Service)
remoteproc node should point to the QDSP PUB address space
(QDSP6...SS_PUB) which has a length of 0x4040. Value of 0x100000 covers
entire Touring/CDSP memory block seems to big here.
This should have no functional impact on Linux users, because PAS loader
does not use this address space at all.
Cc: stable@vger.kernel.org
Fixes: 96ce9227fd ("arm64: dts: qcom: sm6115: Add remoteproc nodes")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241213-dts-qcom-cdsp-mpss-base-address-v3-22-2e0036fccd8d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 472d65e7cb upstream.
The address space in MPSS/Modem PAS (Peripheral Authentication Service)
remoteproc node should point to the QDSP PUB address space
(QDSP6...SS_PUB) which has a length of 0x10000. Value of 0x100 was
copied from older DTS, but it grew since then.
This should have no functional impact on Linux users, because PAS loader
does not use this address space at all.
Cc: stable@vger.kernel.org
Fixes: 96ce9227fd ("arm64: dts: qcom: sm6115: Add remoteproc nodes")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241213-dts-qcom-cdsp-mpss-base-address-v3-21-2e0036fccd8d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3de1bf12c6 upstream.
The address space in CDSP PAS (Peripheral Authentication Service)
remoteproc node should point to the QDSP PUB address space
(QDSP6...SS_PUB) which has a length of 0x10000. Value of 0x1400000 was
copied from older DTS, but it does not look accurate at all.
This should have no functional impact on Linux users, because PAS loader
does not use this address space at all.
Fixes: 5f2a9cd4b1 ("arm64: dts: qcom: x1e80100: Add ADSP/CDSP remoteproc nodes")
Cc: stable@vger.kernel.org
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241213-dts-qcom-cdsp-mpss-base-address-v3-14-2e0036fccd8d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7a00307736 upstream.
The address space in ADSP PAS (Peripheral Authentication Service)
remoteproc node should point to the QDSP PUB address space
(QDSP6...SS_PUB): 0x0680_0000 with length of 0x10000.
0x3000_0000, value used so far, is the main region of CDSP and was
simply copied from other/older DTS.
Correct the base address and length, which also moves the node to
different place to keep things sorted by unit address. The diff looks
big, but only the unit address and "reg" property were changed. This
should have no functional impact on Linux users, because PAS loader does
not use this address space at all.
Fixes: 5f2a9cd4b1 ("arm64: dts: qcom: x1e80100: Add ADSP/CDSP remoteproc nodes")
Cc: stable@vger.kernel.org
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241213-dts-qcom-cdsp-mpss-base-address-v3-13-2e0036fccd8d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9a27f0e186 upstream.
The address space in MPSS/Modem PAS (Peripheral Authentication Service)
remoteproc node should point to the QDSP PUB address space
(QDSP6...SS_PUB) which has a length of 0x10000. Value of 0x4040 was
copied from older DTS, but it grew since then.
This should have no functional impact on Linux users, because PAS loader
does not use this address space at all.
Cc: stable@vger.kernel.org
Fixes: 41c72f36b2 ("arm64: dts: qcom: sdx75: Add remoteproc node")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241213-dts-qcom-cdsp-mpss-base-address-v3-20-2e0036fccd8d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 93a680af46 upstream.
This reverts commit 377548f05b.
Most SoC dtsi files have the display output interfaces disabled by
default, and only enabled on boards that utilize them. The MT8183
has it backwards: the display outputs are left enabled by default,
and only disabled at the board level.
Reverse the situation for the DPI output so that it follows the
normal scheme. For ease of backporting the DSI output is handled
in a separate patch.
Fixes: 009d855a26 ("arm64: dts: mt8183: add dpi node to mt8183")
Fixes: 377548f05b ("arm64: dts: mediatek: mt8183-kukui: Disable DPI display interface")
Cc: stable@vger.kernel.org
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Fei Shao <fshao@chromium.org>
Link: https://lore.kernel.org/r/20241025075630.3917458-1-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0cfbd7805f upstream.
Despite CM_IDLEST1_CORE and CM_FCLKEN1_CORE behaving normal,
disabling SPI leads to messages like when suspending:
Powerdomain (core_pwrdm) didn't enter target state 0
and according to /sys/kernel/debug/pm_debug/count off state is not
entered. That was not connected to SPI during the discussion
of disabling SPI. See:
https://lore.kernel.org/linux-omap/20230122100852.32ae082c@aktux/
The reason is that SPI is per default in slave mode. Linux driver
will turn it to master per default. It slave mode, the powerdomain seems to
be kept active if active chip select input is sensed.
Fix that by explicitly disabling the SPI3 pins which used to be muxed by
the bootloader since they are available on an optionally fitted header
which would require dtb overlays anyways.
Fixes: a622310f7f ("ARM: dts: gta04: fix excess dma channel usage")
CC: stable@vger.kernel.org
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20241204174152.2360431-1-andreas@kemnade.info
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c1472ec1dc upstream.
A bus_dma_limit was added for l3 bus by commit cfb5d65f25
("ARM: dts: dra7: Add bus_dma_limit for L3 bus") to fix an issue
observed only with SATA on DRA7-EVM with 4GB RAM and CONFIG_ARM_LPAE
enabled.
Since kernel 5.13, the SATA issue can be reproduced again following
the SATA node move from L3 bus to L4_cfg in commit 8af15365a3
("ARM: dts: Configure interconnect target module for dra7 sata").
Fix it by adding an empty dma-ranges property to l4_cfg and
segment@100000 nodes (parent device tree node of SATA controller) to
inherit the 2GB dma ranges limit from l3 bus node.
Note: A similar fix was applied for PCIe controller by commit
90d4d3f4ea ("ARM: dts: dra7: Fix bus_dma_limit for PCIe").
Fixes: 8af15365a3 ("ARM: dts: Configure interconnect target module for dra7 sata").
Link: https://lore.kernel.org/linux-omap/c583e1bb-f56b-4489-8012-ce742e85f233@smile.fr/
Cc: stable@vger.kernel.org # 5.13
Signed-off-by: Romain Naour <romain.naour@skf.com>
Link: https://lore.kernel.org/r/20241115102537.1330300-1-romain.naour@smile.fr
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 97bbf9e312 upstream.
Added a check for ubi_num for negative numbers
If the variable ubi_num takes negative values then we get:
qemu-system-arm ... -append "ubi.mtd=0,0,0,-22222345" ...
[ 0.745065] ubi_attach_mtd_dev from ubi_init+0x178/0x218
[ 0.745230] ubi_init from do_one_initcall+0x70/0x1ac
[ 0.745344] do_one_initcall from kernel_init_freeable+0x198/0x224
[ 0.745474] kernel_init_freeable from kernel_init+0x18/0x134
[ 0.745600] kernel_init from ret_from_fork+0x14/0x28
[ 0.745727] Exception stack(0x90015fb0 to 0x90015ff8)
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 83ff59a066 ("UBI: support ubi_num on mtd.ubi command line")
Cc: stable@vger.kernel.org
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
