This patch adds support for keys and LEDs on the Xiaomi AX3000T.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The thermistor device nodes were added before the vbus regulator and
reserved memory nodes, when they should be after them, based on
alphabetical order of the device node _name_.
Move them to the correct position. No functional changes intended.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The names currently given to the EC controlled regulators do not match
what is used in the hardware design.
Fix the names and the labels.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
GPIO lines 59 and 61 are named BT_KILL_1V8_L and WIFI_KILL_1V8_L in the
hardware design. Add them to the gpio-line-names property to make the
names available to users and developers.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
For JEDEC compatible SPI NOR chips, there should be a single generic
"jedec,spi-nor" compatible.
Drop the model-specific compatible from the flash node.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add HDMI display out support to both Tungsten510 & Tungsten700
platforms. HDMI audio is not covered by this patch, audio (HDMI & I2S)
will be added as a follow-up patch.
Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The device tree for the MT8188 Geralt is missing power supplies for all
the CPU cores. Power for the little cores is fed from the MT6359 PMIC.
Power for the big cores is fed from an MT6319 PMIC on SPMI. The latter
is currently not working in Linux.
Add the power supplies for the little cores.
Supplies for the big cores will be added once the issue with SPMI is
resolved.
Reviewed-by: Fei Shao <fshao@chromium.org>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The MT6359 PMIC has a number of power inputs for its various buck and
LDO regulators. The binding recently gained property definitions for
them.
Add the supplies for the PMIC regulators to the common design dtsi file.
Reviewed-by: Fei Shao <fshao@chromium.org>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Like the dual-role SSUSB controller block that encompasses the XHCI
controller, the latter also takes a vusb33 supply.
Add the supply for each XHCI controller. Also fix up any property
ordering according to DT styles, i.e. move "status" property to the
end.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The SPI NOR flash is powered by a separate "always on" 1.8V LDO
regulated power rail. This rail is fed from the system 3.3V rail.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The VBUS regulator is a current-limiting switch. It does not have
voltage regulation capabilities. The description is also missing a power
input.
Drop the voltage constraints, and add a supply input.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The two regulators that are exposed by the EC are supplied by the system
4.2V power rail.
Add supply properties for them.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The MT8195 Cherry design has two MT6315 PMICs. One has 4 outputs ganged
together; the other has 2 outputs ganged together, and the other two
unused.
Add supplies for these two PMICs. Since the outputs are ganged together,
just add the supply for the first one.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The MT6359 PMIC has a number of power inputs for its various buck and
LDO regulators. The binding recently gained property definitions for
them.
Add the supplies for the PMIC regulators to the common design dtsi file.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The WiFi supply regulator is a current-limiting switch. It does not have
voltage regulation capabilities. The description is also missing a power
input.
Drop the voltage constraints, and add a supply input.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The device tree for the MT8192 Asurada is missing a power supply for
the SPI NOR flash chip.
Add the supply for the SPI NOR flash chip.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The device tree for the MT8192 Asurada is missing power supplies for all
the CPU cores.
Add supplies to the CPU cores. The big and little clusters each have
their own regulator.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The ChromeOS Embedded Controller exposes two regulators to the system in
the MT8192 Asurada design. Both these regulators also have power inputs.
Add supplies for these two regulators.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
There are two MT6315 PMICs in the MT8192 Asurada design. One has two
outputs ganged together and two outputs unused. The other has three
outputs ganged together, and one left independent.
Add supplies for all the used regulators. In the case of ganged outputs,
add the supply for just the first output.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The MT6359 PMIC has a number of power inputs for its various buck and
LDO regulators. The binding recently gained property definitions for
them.
Add the supplies for the PMIC regulators to the common design dtsi file.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The ldo_vcn33_[12]_wifi and ldo_vcn33_[12]_bt are just two regulator
outputs instead of four. The wifi and bt parts refer to separate enable
bits that are OR-ed together to affect the actual regulator output. The
separate bits allow the wifi and bt stacks to enable their power without
coordination between them. These have been deprecated in favor of proper
nodes matching the output.
Add proper ldo_vcn33_[12] nodes and drop the old ones. No default voltage
ranges are given as they don't make sense, and the existing ranges are
about to be removed. In-tree users of the existing *_(wifi|bt) regulator
nodes are converted over to use the new ones.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The MT8186 Voltorb device has one MT6315 PMIC. The first 2 outputs
ganged together, and the other two unused.
Add supplies for this PMIC. Even though the outputs are unused, the
inputs are still connected.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The DMA bounce buffer is attached to the PCIe host controller, i.e. all
PCIe DMA transfers should use it.
Move it from the PCIe (WiFi) device node down to the PCIe host
controller node.
Fixes: 0dca9f0b3e ("arm64: dts: mediatek: asurada: Enable PCIe and add WiFi")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The MT7981 as well as the MT7986 have a built-in EIP-97 rev 2.3p0 crypto
accelerator. This commit adds the missing entry in the dts.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The Mediatek Genio 1200-EVK board has a MT6360 PMIC, powered by the
board system power rail (VSYS) and an additional system power rail
(VSYS_BUCK).
In the board devicetree, the power supply inputs for its buck and ldo
regulators are either incorrect (LDO_VIN3) or missing (LDO_VIN1/2,
BUCK_VIN1/2).
So, add VSYS_BUCK regulator node and the proper supply inputs for this
PMIC.
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Mediatek Genio 1200-EVK board has two MT6315 PMICs, powered by the
board system power rail (VSYS) and connected to the SPMI interface.
Add VSYS regulator node for system power rail and the supply inputs of
these two PMICs.
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add power supply definitions for the additional little CPU core nodes,
that cannot be factorized in the board common dtsi due to little core
number difference between MT8390 SoC (used by this board) and MT8370
SoC (used by Genio 510-EVK).
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Mediatek Genio 510-EVK (MT8370) and 700-EVK (MT8390) devicetrees are
missing power supply definitions for all their CPU cores.
On the boards, the big core power is supplied by a MT6319 (sub PMIC),
and little core power by a MT6365 (main PMIC).
MT8370 and MT8390 SoC have the same core type (little cores are ARM
Cortex A55, big ones are A78), the same big core number (2) but MT8390
SoC has more little cores (6) than MT8370 SoC (only 4).
To handle the little core number difference, add in the board common
dtsi the power supply definitions for the common CPU core nodes (0-3,
6 and 7).
The power supplies for the additional MT8390 CPU core nodes (4 and 5)
will be added for the Genio 700 in a separate commit.
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Mediatek Genio 510 and 700-EVK boards integrate a MT6319 PMIC, powered
by the board system power rail (VSYS) and connected to the SPMI
interface. It provides buck regulators for CPU core power supplies in
particular.
Add the needed nodes in the board common dtsi to enable its support.
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The active-high property in base-dt cannot be overwritten and must be
set in separate overlay.
Fixes: f397471a6a ("arm64: dts: mediatek: mt7988: Add devicetree for BananaPi R4 Pro")
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
On the official case the red LED is named ERR, the blue LED is named ACT.
Reflect these labels in function and set them default off.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
These properties are already set in the original node and do not need
to be defined again.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
It turns out that the label mgmt confuses users and now official case is
released where the port is labeled with number 5. So just rename it to
lan5 to follow naming convension (lan1-4 from mxl switch and lan6 for lan-
combo).
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Radxa NIO-12L EVK board integrates a MT6365 PMIC, compatible with
MT6359, but its devicetree used mt6359.dtsi to enable its support since
the board support was introduced.
Now that mt6365.dtsi has been created, include it instead of mt6359.dtsi
and use MT6365 labels and pmic key compatible too.
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Mediatek Genio 1200 EVK board integrates a MT6365 PMIC, compatible
with MT6359, but the board common definition include file (for the eMMC
and UFS configurations) used the mt6359.dtsi to enable its support
since the board support was introduced.
Now that mt6365.dtsi has been created, include it instead of mt6359.dtsi
and use MT6365 labels and pmic key compatible too.
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Mediatek Genio 510 and 700 EVK boards integrate a MT6365 PMIC,
compatible with MT6359, but the board common definition include file
used the mt6359.dtsi to enable its support since the board support was
introduced.
Now that mt6365.dtsi has been created, include it instead of mt6359.dtsi
and use MT6365 labels and pmic key compatible too.
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The MT6365 PMIC, compatible with MT6359 PMIC, never had its own include
file so the boards that integrates this PMIC used mt6359.dtsi in their
devicetree to enable its support.
So, add the mt6365 include file for the MT6365 definitions and labels.
In order not to duplicate all of them, make it include mt6359.dtsi and
override the compatible strings for the MFD main and sub devices with
the MT6365 ones.
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
[Angelo: Fixed regulators node label]
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Raspberry Pi 3B by marking the VEC clk critical so it doesn't get
turned off and hang the bus.
-----BEGIN PGP SIGNATURE-----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=JtUn
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fix from Stephen Boyd:
"One more fix for the merge window to avoid a boot hang on
Raspberry Pi 3B by marking the VEC clk critical so that it
doesn't get turned off and hang the bus"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: bcm: rpi: Mark VEC clock as CLK_IGNORE_UNUSED
- Drop class_create() for the "tsm" class
-----BEGIN PGP SIGNATURE-----
iIYEABYKAC4WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCae40aBAcZGpid0BrZXJu
ZWwub3JnAAoJEN+KhhkeUWxn/F0BAIpdhnq3TbPMC6Pj0q3DfcXpP+LPD0pqqIom
TwsQVZJCAP4rYVEbIbgeXvkilr7Fpcs2AXbidR/ggBsR3lyVBSNhAA==
=ZK/r
-----END PGP SIGNATURE-----
Merge tag 'tsm-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm
Pull PCIe TSP update from Dan Williams:
"A small update for the TSM core. It is arguably a fix and coming in
late as I have been offline the past few weeks:
- Drop class_create() for the 'tsm' class"
* tag 'tsm-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm:
virt: coco: change tsm_class to a const struct
- kbuild: builddeb - avoid recompiles for non-cross-compiles
Avoid triggering complete rebuilds for non-cross-compile Debian
package builds by only triggering the rebuild of host tools for
actual cross-compile builds.
- kbuild: Never respect CONFIG_WERROR / W=e to fixdep
Avoid spurious rebuilds of fixdep w/ and w/o -Werror during a single
kbuild invocation by never respecting CONFIG_WERROR for fixdep.
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Mathias Krause <minipli@grsecurity.net>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Thomas Weißschuh <linux@weissschuh.net>
-----BEGIN PGP SIGNATURE-----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=yCeR
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild fixes from Nicolas Schier:
- builddeb - avoid recompiles for non-cross-compiles
Avoid triggering complete rebuilds for non-cross-compile Debian
package builds by only triggering the rebuild of host tools for
actual cross-compile builds
- Never respect CONFIG_WERROR / W=e to fixdep
Avoid spurious rebuilds of fixdep w/ and w/o -Werror during a single
kbuild invocation by never respecting CONFIG_WERROR for fixdep
* tag 'kbuild-fixes-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: Never respect CONFIG_WERROR / W=e to fixdep
kbuild: builddeb - avoid recompiles for non-cross-compiles
Subsystem:
- add data_race() in rtc_dev_poll()
Drivers:
- remove i2c_match_id usage
- abx80x: Disable alarm feature if no interrupt attached
- ti-k3: support resuming from IO DDR low power mode
-----BEGIN PGP SIGNATURE-----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=mY/t
-----END PGP SIGNATURE-----
Merge tag 'rtc-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Subsystem:
- add data_race() in rtc_dev_poll()
Drivers:
- remove i2c_match_id usage
- abx80x: Disable alarm feature if no interrupt attached
- ti-k3: support resuming from IO DDR low power mode"
* tag 'rtc-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: abx80x: Disable alarm feature if no interrupt attached
rtc: ntxec: fix OF node reference imbalance
rtc: pic32: allow driver to be compiled with COMPILE_TEST
rtc: ti-k3: Add support to resume from IO DDR low power mode
rtc: cmos: Use platform_get_irq_optional() in cmos_platform_probe()
dt-bindings: rtc: add olpc,xo1-rtc to trivial-rtc
dt-bindings: rtc: sc2731: Add compatible for SC2730
rtc: add data_race() in rtc_dev_poll()
rtc: armada38x: zalloc + calloc to single allocation
dt-bindings: rtc: isl12026: convert to YAML schema
dt-bindings: rtc: microcrystal,rv3028: Allow to specify vdd-supply
rtc: max77686: convert to i2c_new_ancillary_device
dt-bindings: rtc: mpfs-rtc: permit resets
rtc: rx8025: Remove use of i2c_match_id()
rtc: rv8803: Remove use of i2c_match_id()
rtc: rs5c372: Remove use of i2c_match_id()
rtc: pcf2127: Remove use of i2c_match_id()
rtc: m41t80: Remove use of i2c_match_id()
rtc: abx80x: Remove use of i2c_match_id()
mentioning separately: Rafael's commit converting tpm_crb from ACPI driver
to a platform driver. Starting from this release cycle, the branch with TPM
changes mirrored to next is 'for-next-tpm', and patches for keys have their
own separate 'for-next-keys' branch.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRE6pSOnaBC00OEHEIaerohdGur0gUCaezVbgAKCRAaerohdGur
0ggHAQDmhaZ2C3ddAV1WjfXh1YqdWAmqEqoP7ZHAh4OrjyRPTQD+Pc4xl9TSOgHx
/9WzzV6AM6fL5RuC2/PO5RvOKF9mswc=
=tpJM
-----END PGP SIGNATURE-----
Merge tag 'for-next-tpm-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
"Here are the accumulated fixes for 7.1-rc1 and a single structural
change worth mentioning separately: Rafael's commit converting tpm_crb
from ACPI driver to a platform driver"
* tag 'for-next-tpm-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: tpm_tis: stop transmit if retries are exhausted
tpm: tpm_tis: add error logging for data transfer
tpm: avoid -Wunused-but-set-variable
tpm: Use kfree_sensitive() to free auth session in tpm_dev_release()
tpm2-sessions: Fix missing tpm_buf_destroy() in tpm2_read_public()
tpm: Fix auth session leak in tpm2_get_random() error path
tpm: i2c: atmel: fix block comment formatting
tpm_crb: Convert ACPI driver to a platform one
tpm: Make tcpci_pm_ops variable static const
Since v2025.11.22:
Initial SoC Slider support
SoC Slider is an SoC-wide power/performance policy setting.
On SoC Slider systems, EPP plays a diminished role.
Whitespace cleanup via: indent -npro -kr -i8 -ts8 -sob -l160 -ss -ncs -cp1
No functional changes
Signed-off-by: Len Brown <len.brown@intel.com>
x86_energy_perf_policy accesses the SoC Slider via standard
user/kernel APIs to the processor_thermal_soc_slider driver.
Machines that support SoC Slider largely use it instead of EPP,
which may continue to exist in a diminished role, or vanish entirely.
Signed-off-by: Len Brown <len.brown@intel.com>
When processor_thermal_soc_slider is loaded, its slider
and offset modparams are visible. Check that the driver
actually registered the profile named "SoC Slider" before
reading or writing these modparams.
n.b. This utility allows writing the Slider and Offset modparams
even if the driver policy is not "balanced". Currently the
processor_thermal_soc_slider consults those modparams
only in "balanced" mode.
Signed-off-by: Len Brown <len.brown@intel.com>
On Raspberry Pi 3B, the VEC clock is used by the VideoCore firmware
display driver, which remains active until the vc4 driver loads and
sends NOTIFY_DISPLAY_DONE. If this clock is disabled during boot, a bus
lockup happens and the firmware becomes unresponsive, causing a complete
system lockup.
Mark the VEC clock with CLK_IGNORE_UNUSED so it survives the unused
clock disablement and remains available until the vc4 driver takes over
display management.
Fixes: 672299736a ("clk: bcm: rpi: Manage clock rate in prepare/unprepare callbacks")
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/r/5f0bec08-f458-4fba-8bf3-06817a100c4c@sirena.org.uk
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patch.msgid.link/20260401111416.562279-2-mcanal@igalia.com
Tested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Brian Masney <bmasney@redhat.com> # Active contributor to clk
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>