Support for per-process page tables requires the SMMU aparture to be
setup such that the GPU can make updates with the SMMU. On some targets
this is done statically in firmware, on others it's expected to be
requested in runtime by the driver, through a SCM call.
One place where configuration is expected to be done dynamically is the
QCS6490 rb3gen2.
The downstream driver does this unconditioanlly on any A6xx and newer,
so follow suite and make the call.
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Link: https://lore.kernel.org/r/20241110-adreno-smmu-aparture-v2-2-9b1fb2ee41d4@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QCOM_SCM_SVC_MP service provides QCOM_SCM_MP_CP_SMMU_APERTURE_ID,
which is used to trigger the mapping of register banks into the SMMU
context for per-processes page tables to function (in case this isn't
statically setup by firmware).
This is necessary on e.g. QCS6490 Rb3Gen2, in order to avoid "CP | AHB
bus error"-errors from the GPU.
Introduce a function to allow the msm driver to invoke this call.
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Link: https://lore.kernel.org/r/20241110-adreno-smmu-aparture-v2-1-9b1fb2ee41d4@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Commit c14e64b469 ("soc: qcom: llcc: Support chipsets that can write
to llcc") made the code not configure certain registers on SDM845 due
to firmware security policies. That turned out only to concern SDM845,
but the condition was chosen such that all other entries (for SoCs that
didnot need it) were required to set .need_llcc_cfg = true.
Flip the condition, so the default is "doesn't need the workaround".
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241104-topic-llcc_flip-v1-1-3003c846d131@oss.qualcomm.com
[bjorn: Dropped a few newly added need_llcc_cfg uses]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add LLCC configuration for the QCS8300 platform. There is an errata on
LB_CNT information on QCS8300 platform, hardcode num_banks to get the
correct value.
Signed-off-by: Jingyi Wang <quic_jingyw@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241031-qcs8300_llcc-v3-2-bb56952cb83b@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Document the Last Level Cache Controller on QCS8300 platform.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jingyi Wang <quic_jingyw@quicinc.com>
Link: https://lore.kernel.org/r/20241031-qcs8300_llcc-v3-1-bb56952cb83b@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Document the LLCC on the QCS615 platform.
The QCS615 platform has LLCC as the system cache controller. It
includes 1 LLCC instance and 1 broadcast interface.
Signed-off-by: Song Xue <quic_songxue@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20241010-add_llcc_support_for_qcs615-v2-1-044432450a75@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Implement necessary support for the LLCC control on the SAR1130P and
SAR2130P platforms. These two platforms use different ATTR1_MAX_CAP
shift and also require manual override for num_banks.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241026-sar2130p-llcc-v3-3-2a58fa1b4d12@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
As pointed out by Konrad Dybcio, we generally should be using decimal
numbers to represent bit positions / bit shifts rather than hex numbers.
Use decimals for consistency.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241026-sar2130p-llcc-v3-2-2a58fa1b4d12@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Describe the last level cache controller on the SAR2130P and SAR1130P
platforms. They have 2 banks and also a separate register set to control
scratchpad slice.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241026-sar2130p-llcc-v3-1-2a58fa1b4d12@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Document the Always-On Subsystem side channel on the Qualcomm QCS8300
platform for communication with client found on the SoC such as
remoteprocs.
Signed-off-by: Kyle Deng <quic_chunkaid@quicinc.com>
Signed-off-by: Jingyi Wang <quic_jingyw@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240911-qcs8300_binding-v2-4-de8641b3eaa1@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Document qcom,qcs8300-imem compatible. It has child node for debug
purpose.
Signed-off-by: Jingyi Wang <quic_jingyw@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240911-qcs8300_binding-v2-3-de8641b3eaa1@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Document scm compatible for the Qualcomm QCS8300 SoC. It is an interface
to communicate to the secure firmware.
Signed-off-by: Zhenhua Huang <quic_zhenhuah@quicinc.com>
Signed-off-by: Jingyi Wang <quic_jingyw@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240911-qcs8300_binding-v2-2-de8641b3eaa1@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use dev_err_probe() directly in the driver probe phase, and we
don't need to judge if the error code is not equal to -EPROBE_DEFER.
This can simplify the code a bit.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Link: https://lore.kernel.org/r/20240909122921.12627-5-zhangzekun11@huawei.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use dev_err_probe() directly in the driver probe phase, and we
don't need to judge if the error code is not equal to -EPROBE_DEFER.
This can simplify the code a bit.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Link: https://lore.kernel.org/r/20240909122921.12627-4-zhangzekun11@huawei.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use dev_err_probe() directly in the driver probe phase, and we
don't need to judge if the error code is not equal to -EPROBE_DEFER.
This can simplify the code a bit.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Link: https://lore.kernel.org/r/20240909122921.12627-2-zhangzekun11@huawei.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add compatible for AOSS QMP representing support on SA8255p.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com>
Link: https://lore.kernel.org/r/20240905192328.3778542-1-quic_nkela@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Fix warnings like:
smem.c:504: warning: No description found for return value of 'qcom_smem_alloc'
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241021-topic-smem_kerneldoc-v1-1-4825904a7e25@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QCM6490 is a variant of SC7280, with the usual set of protection
domains, and hence the need for a PD-mapper. In particular USB Type-C
port management and battery management is pmic_glink based.
Add an entry to the kernel, to avoid the need for userspace to provide
this service.
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241004-qcm6490-pd-mapper-v1-1-d6f4bc3bffa3@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This loop is supposed to break if the frequency returned from
clk_round_rate() is the same as on the previous iteration. However,
that check doesn't make sense on the first iteration through the loop.
It leads to reading before the start of these->clk_perf_tbl[] array.
Fixes: eddac5af06 ("soc: qcom: Add GENI based QUP Wrapper driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/8cd12678-f44a-4b16-a579-c8f11175ee8c@stanley.mountain
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the SC8280XP-based Microsoft Surface Pro 9 5G to the allowlist.
Reviewed-by: Konrad Dybcio <konradybcio@kernel.org>
Signed-off-by: Jérôme de Bretagne <jerome.debretagne@gmail.com>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20240908223505.21011-3-jerome.debretagne@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Qualcomm SoC community gathers in #linux-msm channel on OFTC, so mention
it in the maintainer entries.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240821102602.134216-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Reorganize kerneldoc parameter names to match the parameter
order in the function header.
Problems identified using Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/20240930112121.95324-25-Julia.Lawall@inria.fr
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The current way of storing the configuration is very much
unmaintainable. Convert the data to use designated initializers to make
it easier both to understand and add/update the slice configuration
data.
Signed-off-by: Konrad Dybcio <quic_kdybcio@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240910-topic-llcc_unwrap-v2-1-f0487c983373@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The cpu_emergency_register_virt_callback() function is used
unconditionally by the x86 kvm code, but it is declared (and defined)
conditionally:
#if IS_ENABLED(CONFIG_KVM_INTEL) || IS_ENABLED(CONFIG_KVM_AMD)
void cpu_emergency_register_virt_callback(cpu_emergency_virt_cb *callback);
...
leading to a build error when neither KVM_INTEL nor KVM_AMD support is
enabled:
arch/x86/kvm/x86.c: In function ‘kvm_arch_enable_virtualization’:
arch/x86/kvm/x86.c:12517:9: error: implicit declaration of function ‘cpu_emergency_register_virt_callback’ [-Wimplicit-function-declaration]
12517 | cpu_emergency_register_virt_callback(kvm_x86_ops.emergency_disable_virtualization_cpu);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/x86/kvm/x86.c: In function ‘kvm_arch_disable_virtualization’:
arch/x86/kvm/x86.c:12522:9: error: implicit declaration of function ‘cpu_emergency_unregister_virt_callback’ [-Wimplicit-function-declaration]
12522 | cpu_emergency_unregister_virt_callback(kvm_x86_ops.emergency_disable_virtualization_cpu);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix the build by defining empty helper functions the same way the old
cpu_emergency_disable_virtualization() function was dealt with for the
same situation.
Maybe we could instead have made the call sites conditional, since the
callers (kvm_arch_{en,dis}able_virtualization()) have an empty weak
fallback. I'll leave that to the kvm people to argue about, this at
least gets the build going for that particular config.
Fixes: 590b09b1d8 ("KVM: x86: Register "emergency disable" callbacks when virt is enabled")
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Kai Huang <kai.huang@intel.com>
Cc: Chao Gao <chao.gao@intel.com>
Cc: Farrah Chen <farrah.chen@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
imx: use devie name instead of genereic imx_mu_chan as interrupt name
qcom: enable sa8255p and qcs8300 ipc controllers
bcm2835: Fix timeout during suspend mode
mailbox: convert to use use of_property_match_string
mediatek: enable mt8188
spreadtrum: use devm_clk_get_enabled helpers
rockchip: fix device-id typo
-----BEGIN PGP SIGNATURE-----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=nCRH
-----END PGP SIGNATURE-----
Merge tag 'mailbox-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar:
- fix kconfig dependencies (mhu-v3, omap2+)
- use devie name instead of genereic imx_mu_chan as interrupt name
(imx)
- enable sa8255p and qcs8300 ipc controllers (qcom)
- Fix timeout during suspend mode (bcm2835)
- convert to use use of_property_match_string (mailbox)
- enable mt8188 (mediatek)
- use devm_clk_get_enabled helpers (spreadtrum)
- fix device-id typo (rockchip)
* tag 'mailbox-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
mailbox, remoteproc: omap2+: fix compile testing
dt-bindings: mailbox: qcom-ipcc: Document QCS8300 IPCC
dt-bindings: mailbox: qcom-ipcc: document the support for SA8255p
dt-bindings: mailbox: mtk,adsp-mbox: Add compatible for MT8188
mailbox: Use of_property_match_string() instead of open-coding
mailbox: bcm2835: Fix timeout during suspend mode
mailbox: sprd: Use devm_clk_get_enabled() helpers
mailbox: rockchip: fix a typo in module autoloading
mailbox: imx: use device name in interrupt name
mailbox: ARM_MHU_V3 should depend on ARM64
I2C host fixes for v6.12-rc1 (from Andi)
The DesignWare driver now has the correct ENABLE-ABORT sequence,
ensuring ABORT can always be sent when needed.
In the SynQuacer controller we now check for PCLK as an optional
clock, allowing ACPI to directly provide the clock rate.
The recent KEBA driver required a dependency fix in Kconfig.
The XIIC driver now has a corrected power suspend sequence.
-----BEGIN PGP SIGNATURE-----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=CZPe
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.12-rc1-additional_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- fix DesignWare driver ENABLE-ABORT sequence, ensuring ABORT can
always be sent when needed
- check for PCLK in the SynQuacer controller as an optional clock,
allowing ACPI to directly provide the clock rate
- KEBA driver Kconfig dependency fix
- fix XIIC driver power suspend sequence
* tag 'i2c-for-6.12-rc1-additional_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: xiic: Fix pm_runtime_set_suspended() with runtime pm enabled
i2c: keba: I2C_KEBA should depend on KEBA_CP500
i2c: synquacer: Deal with optional PCLK correctly
i2c: designware: fix controller is holding SCL low while ENABLE bit is disabled
- handle chained SGLs in the new tracing code (Christoph Hellwig)
-----BEGIN PGP SIGNATURE-----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=zjTS
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.12-2024-09-29' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fix from Christoph Hellwig:
- handle chained SGLs in the new tracing code (Christoph Hellwig)
* tag 'dma-mapping-6.12-2024-09-29' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: fix DMA API tracing for chained scatterlists
These are mostly minor updates. There are two drivers (lpfc and
mpi3mr) which missed the initial pull and a core change to retry a
start/stop unit which affect suspend/resume.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZvh4QiYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishQajAQDx561I
cgbPZjZkSOYp+qJowaphyySZ1SS8pfMlVAIiXQEAs4SqhIN8e9QWpgI0bA7X7xtB
UiOUsIHPHM+BFU6kbJQ=
=qjsp
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"These are mostly minor updates.
There are two drivers (lpfc and mpi3mr) which missed the initial
pull and a core change to retry a start/stop unit which affect
suspend/resume"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (32 commits)
scsi: lpfc: Update lpfc version to 14.4.0.5
scsi: lpfc: Support loopback tests with VMID enabled
scsi: lpfc: Revise TRACE_EVENT log flag severities from KERN_ERR to KERN_WARNING
scsi: lpfc: Ensure DA_ID handling completion before deleting an NPIV instance
scsi: lpfc: Fix kref imbalance on fabric ndlps from dev_loss_tmo handler
scsi: lpfc: Restrict support for 32 byte CDBs to specific HBAs
scsi: lpfc: Update phba link state conditional before sending CMF_SYNC_WQE
scsi: lpfc: Add ELS_RSP cmd to the list of WQEs to flush in lpfc_els_flush_cmd()
scsi: mpi3mr: Update driver version to 8.12.0.0.50
scsi: mpi3mr: Improve wait logic while controller transitions to READY state
scsi: mpi3mr: Update MPI Headers to revision 34
scsi: mpi3mr: Use firmware-provided timestamp update interval
scsi: mpi3mr: Enhance the Enable Controller retry logic
scsi: sd: Fix off-by-one error in sd_read_block_characteristics()
scsi: pm8001: Do not overwrite PCI queue mapping
scsi: scsi_debug: Remove a useless memset()
scsi: pmcraid: Convert comma to semicolon
scsi: sd: Retry START STOP UNIT commands
scsi: mpi3mr: A performance fix
scsi: ufs: qcom: Update MODE_MAX cfg_bw value
...
