[ Upstream commit 377548f05b ]
Commit 009d855a26 ("arm64: dts: mt8183: add dpi node to mt8183") adds
a device-tree node for the DPI display interface that feeds the external
display pipeline, to enable HDMI support on the Pumpkin board.
However, the external display is not fully described on Chrome devices,
blocked by further work on DP / USB-C muxing graph bindings. This
incomplete description currently breaks internal display at least on the
Cozmo board. The same issue was found and fixed on MT8186 devices with
commit 3079fb09dd ("arm64: dts: mediatek: mt8186-corsola: Disable DPI
display interface"), but the MT8183 change wasn't merged until then.
Disable the external display interface for the Kukui device family until
the necessary work is done, like in the MT8186 Corsola case.
Fixes: 009d855a26 ("arm64: dts: mt8183: add dpi node to mt8183")
Link: https://lore.kernel.org/linux-mediatek/20240821042836.2631815-1-wenst@chromium.org/
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240916162956.267340-1-alpernebiyasak@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c14ab45f5d ]
The infracfg_ao node in mt8195.dtsi was causing a dtbs_check error.
The error message was:
syscon@10001000: compatible: ['mediatek,mt8195-infracfg_ao', 'syscon',
'simple-mfd'] is too long
To resolve this, remove 'simple-mfd' from the 'compatible' property of the
infracfg_ao node.
Fixes: 37f2582883 ("arm64: dts: Add mediatek SoC mt8195 and evaluation board")
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241002051620.2050-1-macpaul.lin@mediatek.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0fc557b539 ]
The mutex node in mt8195.dtsi was triggering a dtbs_check error:
mutex@1c101000: 'clock-names', 'reg-names' do not match any of the
regexes: 'pinctrl-[0-9]+'
This seems no need by inspecting the DT schemas and other reference boards,
so drop 'clock-names' and 'reg-names' in mt8195.dtsi.
Fixes: 92d2c23dc2 ("arm64: dts: mt8195: add display node for vdosys1")
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241002051620.2050-4-macpaul.lin@mediatek.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 752804acea ]
The ethernet-phy node in mt8395-genio-1200-evk.dts was triggering a
dtbs_check error. The error message was:
eth-phy0@1: $nodename:0: 'eth-phy0@1' does not match
'^ethernet-phy(@[a-f0-9]+)?$'
Fix this issue by replacing 'eth-phy' node to generic 'ethernet-phy'.
Fixes: f2b543a191 ("arm64: dts: mediatek: add device-tree for Genio 1200 EVK board")
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241002051620.2050-3-macpaul.lin@mediatek.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4007651c25 ]
The clock index "CLK_APMIXED_MFGPLL" belongs to the "apmixedsys" provider,
so fix the index.
In addition, add a "mfg1" label so following commits could set
domain-supply for MFG1 power domain.
Fixes: eaf73e4224 ("arm64: dts: mediatek: mt8188: Add support for SoC power domains")
Signed-off-by: Pablo Sun <pablo.sun@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241002022138.29241-2-pablo.sun@mediatek.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit badf752b5e ]
When TMR_MANAGER is enabled as module there is a need to export functions
which are present in architecture code.
It has been found by running:
make W=1 C=1 allmodconfig
sed -i -e 's/WERROR=y/WERROR=n/g' .config
make C=1 W=1
which errors out like this:
ERROR: modpost: "xmb_manager_register" [drivers/misc/xilinx_tmr_manager.ko] undefined!
ERROR: modpost: "xmb_inject_err" [drivers/misc/xilinx_tmr_inject.ko] undefined!
Fixes: a5e3aaa654 ("microblaze: Add xmb_manager_register function")
Reported-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/e322dbbbde0feef83f44304ea13249d365d1dc5f.1718799090.git.michal.simek@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 44ed4f90a9 ]
If we fail to allocate memory for cb_data by kmalloc, the memory
allocation for eve_data is never freed, add the missing kfree()
in the error handling path.
Fixes: 05e5ba40ea ("driver: soc: xilinx: Add support of multiple callbacks for same event in event management driver")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20240706065155.452764-1-cuigaosheng1@huawei.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6317aad0e1 ]
Newer boards should always use squashed MBN firmware instead of split
MDT+bNN. Use qcom/qcs6490/modem.mbn as the firmware for the modem on
RB3gen2.
Fixes: ac6d35b9b7 ("arm64: dts: qcom: qcs6490-rb3gen2: Enable various remoteprocs")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konradybcio@kernel.org>
Link: https://lore.kernel.org/r/20240907-rb3g2-fixes-v1-1-eb9da98e9f80@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 003c7e0191 ]
disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable when request IRQ.
Fixes: 9728fb3ce1 ("spi: lpspi: disable lpspi module irq in DMA mode")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20240906022828.891812-1-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 18be43aca2 ]
Since smd_vreg_rpm is used only in
drivers/regulator/qcom_smd-regulator.c, make it static and fix the
following sparse warning:
drivers/regulator/qcom_smd-regulator.c:14:21: sparse: warning:
symbol 'smd_vreg_rpm' was not declared. Should it be static?
No functional changes intended.
Fixes: 5df3b41bd6 ("regulator: qcom_smd: Keep one rpm handle for all vregs")
Signed-off-by: Min-Hua Chen <minhuadotchen@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patch.msgid.link/20240926231038.31916-1-minhuadotchen@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f181d1cda ]
If the APLIC driver is probed before the IMSIC driver, the parent MSI
domain will be missing, which causes a NULL pointer dereference in
msi_create_device_irq_domain().
Avoid this by deferring probe until the parent MSI domain is available. Use
dev_err_probe() to avoid printing an error message when returning
-EPROBE_DEFER.
Fixes: ca8df97fe6 ("irqchip/riscv-aplic: Add support for MSI-mode")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241114200133.3069460-1-samuel.holland@sifive.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e5cfc0989d ]
of_find_compatible_node() increments the node's refcount, and it must be
decremented again with a call to of_node_put() when the pointer is no
longer required to avoid leaking the resource.
Instead of adding the missing calls to of_node_put() in all execution
paths, use the cleanup attribute for 'arm_timer' by means of the
__free() macro, which automatically calls of_node_put() when the
variable goes out of scope.
Fixes: 25de4ce5ed ("clocksource/drivers/timer-ti-dm: Handle dra7 timer wrap errata i940")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20241031-timer-ti-dm-systimer-of_node_put-v3-1-063ee822b73a@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0309f714a0 ]
The sp804 is currently only user selectable if COMPILE_TEST, this was
done by commit dfc82faad7 ("clocksource/drivers/sp804: Add
COMPILE_TEST to CONFIG_ARM_TIMER_SP804") in order to avoid it being
spuriously offered on platforms that won't have the hardware since it's
generally only seen on Arm based platforms. This config is overly
restrictive, while platforms that rely on the SP804 do select it in
their Kconfig there are others such as the Arm fast models which have a
SP804 available but currently unused by Linux. Relax the dependency to
allow it to be user selectable on arm and arm64 to avoid surprises and
in case someone comes up with a use for extra timer hardware.
Fixes: dfc82faad7 ("clocksource/drivers/sp804: Add COMPILE_TEST to CONFIG_ARM_TIMER_SP804")
Reported-by: Ross Burton <ross.burton@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241001-arm64-vexpress-sp804-v3-1-0a2d3f7883e4@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5c2e7736e2 ]
When PREEMPT_RT=y, spin locks are mapped to rt_mutex types, so using
spinlock_check() + __raw_spin_lock_init() to initialize spin locks is
incorrect, and would cause build errors.
Introduce __spin_lock_init() to initialize a spin lock with lockdep
rquired information for PREEMPT_RT builds, and use it in the Rust
helper.
Fixes: d2d6422f8b ("x86: Allow to enable PREEMPT_RT.")
Closes: https://lore.kernel.org/oe-kbuild-all/202409251238.vetlgXE9-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Eder Zulian <ezulian@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Tested-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20241107163223.2092690-2-ezulian@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 52e0874fc1 ]
The sleeping locks on PREEMPT_RT (rt_spin_lock() and friends) lack
sparse annotation. Therefore a missing spin_unlock() won't be spotted by
sparse in a PREEMPT_RT build while it is noticed on a !PREEMPT_RT build.
Add the __acquires/__releases macros to the lock/ unlock functions. The
trylock functions already use the __cond_lock() wrapper.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240812104200.2239232-2-bigeasy@linutronix.de
Stable-dep-of: 5c2e7736e2 ("rust: helpers: Avoid raw_spin_lock initialization for PREEMPT_RT")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0f0d1b8e50 ]
Instead of solving the underlying problem of the double invocation of
__sched_fork() for idle tasks, sched-ext decided to hack around the issue
by partially clearing out the entity struct to preserve the already
enqueued node. A provided analysis and solution has been ignored for four
months.
Now that someone else has taken care of cleaning it up, remove the
disgusting hack and clear out the full structure. Remove the comment in the
structure declaration as well, as there is no requirement for @node being
the last element anymore.
Fixes: f0e1a0643a ("sched_ext: Implement BPF extensible scheduler class")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/87ldy82wkc.ffs@tglx
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 183ec5f26b ]
During testing of the preceding changes, I noticed that in some cases,
current->kcsan_ctx.in_flat_atomic remained true until task exit. This is
obviously wrong, because _all_ accesses for the given task will be
treated as atomic, resulting in false negatives i.e. missed data races.
Debugging led to fs/dcache.c, where we can see this usage of seqlock:
struct dentry *d_lookup(const struct dentry *parent, const struct qstr *name)
{
struct dentry *dentry;
unsigned seq;
do {
seq = read_seqbegin(&rename_lock);
dentry = __d_lookup(parent, name);
if (dentry)
break;
} while (read_seqretry(&rename_lock, seq));
[...]
As can be seen, read_seqretry() is never called if dentry != NULL;
consequently, current->kcsan_ctx.in_flat_atomic will never be reset to
false by read_seqretry().
Give up on the wrong assumption of "assume closing read_seqretry()", and
rely on the already-present annotations in read_seqcount_begin/retry().
Fixes: 88ecd153be ("seqlock, kcsan: Add annotations for KCSAN")
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241104161910.780003-6-elver@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5c1806c41c ]
While fuzzing an arm64 kernel, Alexander Potapenko reported:
| BUG: KCSAN: data-race in ktime_get_mono_fast_ns / timekeeping_update
|
| write to 0xffffffc082e74248 of 56 bytes by interrupt on cpu 0:
| update_fast_timekeeper kernel/time/timekeeping.c:430 [inline]
| timekeeping_update+0x1d8/0x2d8 kernel/time/timekeeping.c:768
| timekeeping_advance+0x9e8/0xb78 kernel/time/timekeeping.c:2344
| update_wall_time+0x18/0x38 kernel/time/timekeeping.c:2360
| [...]
|
| read to 0xffffffc082e74258 of 8 bytes by task 5260 on cpu 1:
| __ktime_get_fast_ns kernel/time/timekeeping.c:372 [inline]
| ktime_get_mono_fast_ns+0x88/0x174 kernel/time/timekeeping.c:489
| init_srcu_struct_fields+0x40c/0x530 kernel/rcu/srcutree.c:263
| init_srcu_struct+0x14/0x20 kernel/rcu/srcutree.c:311
| [...]
|
| value changed: 0x000002f875d33266 -> 0x000002f877416866
|
| Reported by Kernel Concurrency Sanitizer on:
| CPU: 1 UID: 0 PID: 5260 Comm: syz.2.7483 Not tainted 6.12.0-rc3-dirty #78
This is a false positive data race between a seqcount latch writer and a reader
accessing stale data. Since its introduction, KCSAN has never understood the
seqcount_latch interface (due to being unannotated).
Unlike the regular seqlock interface, the seqcount_latch interface for latch
writers never has had a well-defined critical section, making it difficult to
teach tooling where the critical section starts and ends.
Introduce an instrumentable (non-raw) seqcount_latch interface, with
which we can clearly denote writer critical sections. This both helps
readability and tooling like KCSAN to understand when the writer is done
updating all latch copies.
Fixes: 88ecd153be ("seqlock, kcsan: Add annotations for KCSAN")
Reported-by: Alexander Potapenko <glider@google.com>
Co-developed-by: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Signed-off-by: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241104161910.780003-4-elver@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1d4199cbbe ]
__run_timer_base() checks base::next_expiry without holding
base::lock. That can race with a remote CPU updating next_expiry under the
lock. This is an intentional and harmless data race, but lacks a
READ_ONCE(), so KCSAN complains about this.
Add the missing READ_ONCE(). All other places are covered already.
Fixes: 79f8b28e85 ("timers: Annotate possible non critical data race of next_expiry")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/all/87a5emyqk0.ffs@tglx
Closes: https://lore.kernel.org/oe-lkp/202410301205.ef8e9743-lkp@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 92b043fd99 ]
The details about the handling of the "normal" values were moved
to the _msecs_to_jiffies() helpers in commit ca42aaf0c8 ("time:
Refactor msecs_to_jiffies"). However, the same commit still mentioned
__msecs_to_jiffies() in the added documentation.
Thus point to _msecs_to_jiffies() instead.
Fixes: ca42aaf0c8 ("time: Refactor msecs_to_jiffies")
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241025110141.157205-2-ojeda@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b05aefc1f5 ]
The documentation's intention is to compare msecs_to_jiffies() (first
sentence) with __msecs_to_jiffies() (second sentence), which is what the
original documentation did. One of the cleanups in commit f3cb80804b
("time: Fix various kernel-doc problems") may have thought the paragraph
was talking about the latter since that is what it is being documented.
Thus revert that part of the change.
Fixes: f3cb80804b ("time: Fix various kernel-doc problems")
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241025110141.157205-1-ojeda@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f730fd535f ]
Guard functions in local_lock.h are defined using DEFINE_GUARD() and
DEFINE_LOCK_GUARD_1() macros having lock type defined as pointer in
the percpu address space. The functions, defined by these macros
return value in generic address space, causing:
cleanup.h:157:18: error: return from pointer to non-enclosed address space
and
cleanup.h:214:18: error: return from pointer to non-enclosed address space
when strict percpu checks are enabled.
Add explicit casts to remove address space of the returned pointer.
Found by GCC's named address space checks.
Fixes: e4ab322fba ("cleanup: Add conditional guard support")
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20240819074124.143565-1-ubizjak@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 56ac7bd2c5 ]
This reverts commit c02904f05f.
Such commit assumed that only two symbols are relevant for the symbol
size calculation. However, this can lead to an incorrect symbol size
calculation when there are mapping symbols emitted by readelf.
For instance, when feeding 'update_irq_load_avg+0x1c/0x1c4', faddr2line
might need to process the following readelf lines:
784284: ffffffc0081cca30 428 FUNC GLOBAL DEFAULT 2 update_irq_load_avg
87319: ffffffc0081ccb0c 0 NOTYPE LOCAL DEFAULT 2 $x.62522
87321: ffffffc0081ccbdc 0 NOTYPE LOCAL DEFAULT 2 $x.62524
87323: ffffffc0081ccbe0 0 NOTYPE LOCAL DEFAULT 2 $x.62526
87325: ffffffc0081ccbe4 0 NOTYPE LOCAL DEFAULT 2 $x.62528
87327: ffffffc0081ccbe8 0 NOTYPE LOCAL DEFAULT 2 $x.62530
87329: ffffffc0081ccbec 0 NOTYPE LOCAL DEFAULT 2 $x.62532
87331: ffffffc0081ccbf0 0 NOTYPE LOCAL DEFAULT 2 $x.62534
87332: ffffffc0081ccbf4 0 NOTYPE LOCAL DEFAULT 2 $x.62535
783403: ffffffc0081ccbf4 424 FUNC GLOBAL DEFAULT 2 sched_pelt_multiplier
The symbol size of 'update_irq_load_avg' should be calculated with the
address of 'sched_pelt_multiplier', after skipping the mapping symbols
seen in between. However, the offending commit cuts the list short and
faddr2line incorrectly assumes 'update_irq_load_avg' is the last symbol
in the section, resulting in:
$ scripts/faddr2line vmlinux update_irq_load_avg+0x1c/0x1c4
skipping update_irq_load_avg address at 0xffffffc0081cca4c due to size mismatch (0x1c4 != 0x3ff9a59988)
no match for update_irq_load_avg+0x1c/0x1c4
After reverting the commit the issue is resolved:
$ scripts/faddr2line vmlinux update_irq_load_avg+0x1c/0x1c4
update_irq_load_avg+0x1c/0x1c4:
cpu_of at kernel/sched/sched.h:1109
(inlined by) update_irq_load_avg at kernel/sched/pelt.c:481
Fixes: c02904f05f ("scripts/faddr2line: Check only two symbols when calculating symbol size")
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Brian Johannesmeyer <bjohannesmeyer@gmail.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3bf19a0fb6 ]
When arch_stack_walk_reliable() is called to unwind for newly forked
tasks, the return value is negative which means the call stack is
unreliable. This obviously does not meet expectations.
The root cause is that after commit 3aec4ecb3d ("x86: Rewrite
ret_from_fork() in C"), the 'ret_addr' of newly forked task is changed
to 'ret_from_fork_asm' (see copy_thread()), then at the start of the
unwind, it is incorrectly interprets not as a "signal" one because
'ret_from_fork' is still used to determine the initial "signal" (see
__unwind_start()). Then the address gets incorrectly decremented in the
call to orc_find() (see unwind_next_frame()) and resulting in the
incorrect ORC data.
To fix it, check 'ret_from_fork_asm' rather than 'ret_from_fork' in
__unwind_start().
Fixes: 3aec4ecb3d ("x86: Rewrite ret_from_fork() in C")
Signed-off-by: Zheng Yejian <zhengyejian@huaweicloud.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7569406e95 ]
The function thermal_genl_auto() does not free the allocated message
in the error path. Fix that by putting a out label and jump to it
which will free the message instead of directly returning an error.
Fixes: 47c4b0de08 ("tools/lib/thermal: Add a thermal library")
Reported-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/20241024105938.1095358-1-daniel.lezcano@linaro.org
[ rjw: Fixed up the !msg error path, added Fixes tag ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 24b216b2d1 ]
The thermal netlink has been extended with more commands which require
an encoding with more information. The generic encoding function puts
the thermal zone id with the command name. It is the unique
parameters.
The next changes will provide more parameters to the command. Set the
scene for those new parameters by making the encoding function more
generic.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/20241022155147.463475-4-daniel.lezcano@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: 7569406e95 ("thermal/lib: Fix memory leak on error in thermal_genl_auto()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 812a1c3b9f ]
A static analyzer for C, Smatch, reports and triggers below
warnings:
kernel/rcu/rcuscale.c:1215 rcu_scale_init()
warn: inconsistent returns 'global &fullstop_mutex'.
The checker complains about, we do not unlock the "fullstop_mutex"
mutex, in case of hitting below error path:
<snip>
...
if (WARN_ON_ONCE(jiffies_at_lazy_cb - jif_start < 2 * HZ)) {
pr_alert("ERROR: call_rcu() CBs are not being lazy as expected!\n");
WARN_ON_ONCE(1);
return -1;
^^^^^^^^^^
...
<snip>
it happens because "-1" is returned right away instead of
doing a proper unwinding.
Fix it by jumping to "unwind" label instead of returning -1.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Closes: https://lore.kernel.org/rcu/ZxfTrHuEGtgnOYWp@pc636/T/
Fixes: 084e04fff1 ("rcuscale: Add laziness and kfree tests")
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 572b7cf084 ]
If do_cpt_init() fails, a previous dma_alloc_coherent() call needs to be
undone.
Add the needed dma_free_coherent() before returning.
Fixes: 9e2c7d9994 ("crypto: cavium - Add Support for Octeon-tx CPT Engine")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 19630cf572 ]
The ahash_init functions may return fails. The ahash_hmac_init should
not return ok when ahash_init returns error. For an example, ahash_init
will return -ENOMEM when allocation memory is error.
Fixes: 9d12ba86f8 ("crypto: brcm - Add Broadcom SPU driver")
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b64140c74e ]
The caam_rsa_set_priv_key_form did not check for memory allocation errors.
Add the checks to the caam_rsa_set_priv_key_form functions.
Fixes: 52e26d77b8 ("crypto: caam - add support for RSA key form 2")
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0104dcdaad ]
Variables annotated with __free() need to be initialized if the function
can return before they get updated for the first time or the attempt to
free the memory pointed to by them upon function return may crash the
kernel.
Fix this issue in some places in the thermal testing code.
Fixes: f6a034f2df ("thermal: Introduce a debugfs-based testing facility")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/12576267.O9o76ZdvQC@rjwysocki.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c426fd09c ]
Use DEFINE_FREE() to define a __free function for dropping thermal
zone template reference counters and use it along with __free() to
simplify code in some places.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/4628747.LvFx2qVVIh@rjwysocki.net
[ rjw: Add variable initialization to address compiler warning ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: 0104dcdaad ("thermal: testing: Initialize some variables annoteded with _free()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2388b266c9 ]
Since commit 60949b7b80 ("ACPI: CPPC: Fix MASK_VAL() usage"), _CPC
registers cannot be changed from 1 to 0.
It turns out that there is an extra OR after MASK_VAL_WRITE(), which
has already ORed prev_val with the register mask.
Remove the extra OR to fix the problem.
Fixes: 60949b7b80 ("ACPI: CPPC: Fix MASK_VAL() usage")
Signed-off-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Link: https://patch.msgid.link/20241113103309.761031-1-zhenglifeng1@huawei.com
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 57ee12b6c5 ]
DIV_ROUND_CLOSEST() after kstrtoul() results in an overflow if a large
number such as 18446744073709551615 is provided by the user.
Fix it by reordering clamp_val() and DIV_ROUND_CLOSEST() operations.
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Fixes: c3963bc0a0 ("hwmon: (nct6775) Split core and platform driver")
Message-ID: <7d5084cea33f7c0fd0578c59adfff71f93de94d9.1731375425.git.xiaopei01@kylinos.cn>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 509c3a3626 ]
pmbus_write_smbalert_mask() ignores the errors if the chip can't set
smbalert mask the standard way. It is not necessarily a problem for the irq
support if the chip is otherwise properly setup but it may leave an
uncleared fault behind.
pmbus_core will pick the fault on the next register_check(). The register
check will fails regardless of the actual register support by the chip.
This leads to missing attributes or debugfs entries for chips that should
provide them.
We cannot rely on register_check() as PMBUS_SMBALERT_MASK may be read-only.
Unconditionally clear the page fault after setting PMBUS_SMBALERT_MASK to
avoid the problem.
Suggested-by: Guenter Roeck <linux@roeck-us.net>
Fixes: 221819ca4c ("hwmon: (pmbus/core) Add interrupt support")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Message-ID: <20241105-tps25990-v4-5-0e312ac70b62@baylibre.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2996980e20 ]
Currently, running rcutorture test with torture_type=rcu fwd_progress=8
n_barrier_cbs=8 nocbs_nthreads=8 nocbs_toggle=100 onoff_interval=60
test_boost=2, will trigger the following warning:
WARNING: CPU: 19 PID: 100 at kernel/rcu/tree_nocb.h:1061 rcu_nocb_rdp_deoffload+0x292/0x2a0
RIP: 0010:rcu_nocb_rdp_deoffload+0x292/0x2a0
Call Trace:
<TASK>
? __warn+0x7e/0x120
? rcu_nocb_rdp_deoffload+0x292/0x2a0
? report_bug+0x18e/0x1a0
? handle_bug+0x3d/0x70
? exc_invalid_op+0x18/0x70
? asm_exc_invalid_op+0x1a/0x20
? rcu_nocb_rdp_deoffload+0x292/0x2a0
rcu_nocb_cpu_deoffload+0x70/0xa0
rcu_nocb_toggle+0x136/0x1c0
? __pfx_rcu_nocb_toggle+0x10/0x10
kthread+0xd1/0x100
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2f/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
CPU0 CPU2 CPU3
//rcu_nocb_toggle //nocb_cb_wait //rcutorture
// deoffload CPU1 // process CPU1's rdp
rcu_barrier()
rcu_segcblist_entrain()
rcu_segcblist_add_len(1);
// len == 2
// enqueue barrier
// callback to CPU1's
// rdp->cblist
rcu_do_batch()
// invoke CPU1's rdp->cblist
// callback
rcu_barrier_callback()
rcu_barrier()
mutex_lock(&rcu_state.barrier_mutex);
// still see len == 2
// enqueue barrier callback
// to CPU1's rdp->cblist
rcu_segcblist_entrain()
rcu_segcblist_add_len(1);
// len == 3
// decrement len
rcu_segcblist_add_len(-2);
kthread_parkme()
// CPU1's rdp->cblist len == 1
// Warn because there is
// still a pending barrier
// trigger warning
WARN_ON_ONCE(rcu_segcblist_n_cbs(&rdp->cblist));
cpus_read_unlock();
// wait CPU1 to comes online and
// invoke barrier callback on
// CPU1 rdp's->cblist
wait_for_completion(&rcu_state.barrier_completion);
// deoffload CPU4
cpus_read_lock()
rcu_barrier()
mutex_lock(&rcu_state.barrier_mutex);
// block on barrier_mutex
// wait rcu_barrier() on
// CPU3 to unlock barrier_mutex
// but CPU3 unlock barrier_mutex
// need to wait CPU1 comes online
// when CPU1 going online will block on cpus_write_lock
The above scenario will not only trigger a WARN_ON_ONCE(), but also
trigger a deadlock.
Thanks to nocb locking, a second racing rcu_barrier() on an offline CPU
will either observe the decremented callback counter down to 0 and spare
the callback enqueue, or rcuo will observe the new callback and keep
rdp->nocb_cb_sleep to false.
Therefore check rdp->nocb_cb_sleep before parking to make sure no
further rcu_barrier() is waiting on the rdp.
Fixes: 1fcb932c8b ("rcu/nocb: Simplify (de-)offloading state machine")
Suggested-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Zqiang <qiang.zhang1211@gmail.com>
Reviewed-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a23da88c6c ]
KCSAN reports a data race when access the krcp->monitor_work.timer.expires
variable in the schedule_delayed_monitor_work() function:
<snip>
BUG: KCSAN: data-race in __mod_timer / kvfree_call_rcu
read to 0xffff888237d1cce8 of 8 bytes by task 10149 on cpu 1:
schedule_delayed_monitor_work kernel/rcu/tree.c:3520 [inline]
kvfree_call_rcu+0x3b8/0x510 kernel/rcu/tree.c:3839
trie_update_elem+0x47c/0x620 kernel/bpf/lpm_trie.c:441
bpf_map_update_value+0x324/0x350 kernel/bpf/syscall.c:203
generic_map_update_batch+0x401/0x520 kernel/bpf/syscall.c:1849
bpf_map_do_batch+0x28c/0x3f0 kernel/bpf/syscall.c:5143
__sys_bpf+0x2e5/0x7a0
__do_sys_bpf kernel/bpf/syscall.c:5741 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5739 [inline]
__x64_sys_bpf+0x43/0x50 kernel/bpf/syscall.c:5739
x64_sys_call+0x2625/0x2d60 arch/x86/include/generated/asm/syscalls_64.h:322
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xc9/0x1c0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
write to 0xffff888237d1cce8 of 8 bytes by task 56 on cpu 0:
__mod_timer+0x578/0x7f0 kernel/time/timer.c:1173
add_timer_global+0x51/0x70 kernel/time/timer.c:1330
__queue_delayed_work+0x127/0x1a0 kernel/workqueue.c:2523
queue_delayed_work_on+0xdf/0x190 kernel/workqueue.c:2552
queue_delayed_work include/linux/workqueue.h:677 [inline]
schedule_delayed_monitor_work kernel/rcu/tree.c:3525 [inline]
kfree_rcu_monitor+0x5e8/0x660 kernel/rcu/tree.c:3643
process_one_work kernel/workqueue.c:3229 [inline]
process_scheduled_works+0x483/0x9a0 kernel/workqueue.c:3310
worker_thread+0x51d/0x6f0 kernel/workqueue.c:3391
kthread+0x1d1/0x210 kernel/kthread.c:389
ret_from_fork+0x4b/0x60 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 UID: 0 PID: 56 Comm: kworker/u8:4 Not tainted 6.12.0-rc2-syzkaller-00050-g5b7c893ed5ed #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Workqueue: events_unbound kfree_rcu_monitor
<snip>
kfree_rcu_monitor() rearms the work if a "krcp" has to be still
offloaded and this is done without holding krcp->lock, whereas
the kvfree_call_rcu() holds it.
Fix it by acquiring the "krcp->lock" for kfree_rcu_monitor() so
both functions do not race anymore.
Reported-by: syzbot+061d370693bdd99f9d34@syzkaller.appspotmail.com
Link: https://lore.kernel.org/lkml/ZxZ68KmHDQYU0yfD@pc636/T/
Fixes: 8fc5494ad5 ("rcu/kvfree: Move need_offload_krc() out of krcp->lock")
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0ea3acbc80 ]
Code after the return statement is dead. Enable preemption before
returning from srcu_drive_gp().
This will be important when/if PREEMPT_AUTO (lazy resched) gets merged.
Fixes: 65b4a59557 ("srcu: Make Tiny SRCU explicitly disable preemption")
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 70d8b6485b ]
Ensure sugov_eas_rebuild_sd() is always called when sugov_init()
succeeds. The out goto initialized sugov without forcing the rebuild.
Previously the missing call to sugov_eas_rebuild_sd() could lead to EAS
not being enabled on boot when it should have been, because it requires
all policies to be controlled by schedutil while they might not have
been initialized yet.
Fixes: e7a1b32e43 ("cpufreq: Rebuild sched-domains when removing cpufreq driver")
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/35e572d9-1152-406a-9e34-2525f7548af9@arm.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a10549fcce ]
The commit 320406cb60 ("crypto: inside-secure - Replace generic aes
with libaes") replaced crypto_alloc_cipher() with kmalloc(), but did not
modify the handling of the return value. When kmalloc() returns NULL,
PTR_ERR_OR_ZERO(NULL) returns 0, but in fact, the memory allocation has
failed, and -ENOMEM should be returned.
Fixes: 320406cb60 ("crypto: inside-secure - Replace generic aes with libaes")
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Acked-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d8920a722a ]
The adf_init_aer() won't destroy device_reset_wq when alloc_workqueue()
for device_sriov_wq failed. Add destroy_workqueue for device_reset_wq to
fix this issue.
Fixes: 4469f9b234 ("crypto: qat - re-enable sriov after pf reset")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fefaae9039 ]
The segmentation fault happens because:
During modprobe:
1. In igen6_probe(), igen6_pvt will be allocated with kzalloc()
2. In igen6_register_mci(), mci->pvt_info will point to
&igen6_pvt->imc[mc]
During rmmod:
1. In mci_release() in edac_mc.c, it will kfree(mci->pvt_info)
2. In igen6_remove(), it will kfree(igen6_pvt);
Fix this issue by setting mci->pvt_info to NULL to avoid the double
kfree.
Fixes: 10590a9d4f ("EDAC/igen6: Add EDAC driver for Intel client SoCs using IBECC")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219360
Signed-off-by: Orange Kao <orange@aiven.io>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20241104124237.124109-2-orange@aiven.io
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c418ba6bac ]
If an error indicating that the device needs to be reset is reported,
disable the error reporting before device reset is complete,
enable the error reporting after the reset is complete to prevent
the same error from being reported repeatedly.
Fixes: eaebf4c3b1 ("crypto: hisilicon - Unify hardware error init/uninit into QM")
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c411b39e4 ]
The amd-pstate driver sets CPPC_REQ.min_perf to CPPC_REQ.max_perf when
in active mode with performance governor. Typically CPPC_REQ.max_perf
is set to CPPC.highest_perf. This causes frequency throttling on
power-limited platforms which causes performance regressions on
certain classes of workloads.
Hence, set the CPPC_REQ.min_perf to the CPPC.nominal_perf or
CPPC_REQ.max_perf, whichever is lower of the two.
Fixes: ffa5096a7c ("cpufreq: amd-pstate: implement Pstate EPP support for the AMD processors")
Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20241021101836.9047-2-gautham.shenoy@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 67c08d303e ]
When boost is changed the CPPC value is changed in amd_pstate_cpu_boost_update()
but then changed again when refresh_frequency_limits() and all it's callbacks
occur. The first is a pointless write, so instead just update the limits for
the policy and let the policy refresh anchor everything properly.
Fixes: c8c68c38b5 ("cpufreq: amd-pstate: initialize core precision boost state")
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Reviewed-by: Perry Yuan <perry.yuan@amd.com>
Tested-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Link: https://lore.kernel.org/r/20241012174519.897-2-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
