The early_lookup_bdev() function returns successfully when the disk
device is present but not necessarily its partitions. In this situation,
dm_early_create() fails as the partition block device does not exist
yet.
In my case, this phenomenon occurs quite often because the device is
an SD card with slow reading times, on which kernel takes time to
enumerate available partitions.
Fortunately, the underlying device is back to "probing" state while
enumerating partitions. Waiting for all probing to end is enough to fix
this issue.
That's also the reason why this problem never occurs with rootwait=
parameter: the while loop inside wait_for_root() explicitly waits for
probing to be done and then the function calls async_synchronize_full().
These lines were omitted in 035641b, even though the commit says it's
based on the rootwait logic...
Anyway, calling wait_for_device_probe() after our while loop does the
job (it both waits for probing and calls async_synchronize_full).
Fixes: 035641b01e ("dm init: add dm-mod.waitfor to wait for asynchronously probed block devices")
Signed-off-by: Guillaume Gonnet <ggonnet.linux@gmail.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Update the comments in and above fec_read_bufs() to more clearly
describe what it does.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
The log message for a FEC error or correction includes the data device
name and index_in_region as the context. Although the result of FEC
(for a particular dm-verity instance) is expected to be the same for a
given index_in_region, index_in_region does not uniquely identify the
actual target block that is being corrected. Since that value
(target_block) is likely more useful, log it instead.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
fec_decode_bufs() returns the number of errors corrected or a negative
errno value. However, the caller just checks for an errno value and
doesn't do anything with the number of errors corrected. Simplify the
code by just returning 0 instead of the number of errors corrected.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Replace 'rsb', which is a byte index, with 'index_in_region' which is a
block index. The block index is slightly easier to compute, it matches
what fec_read_bufs() wants, and it avoids the mismatch between the name
and the units of the variable. ('rsb' stood for "Reed-Solomon block",
but its units were bytes, not blocks.)
fec_decode_bufs() does want it as a byte index when computing
parity_block, but that's easily handled locally.
As long as the parameters to the log messages are being adjusted, also
eliminate the unnecessary casts to 'unsigned long long'. %llu is the
correct way to print a u64 in the Linux kernel, as documented in
printk-formats.rst. There's no PRIu64 macro like there is in userspace.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Instead of determining the target block's region by checking which block
of the k blocks being iterated over in fec_read_bufs() is equal to the
target block, instead just directly use the quotient of the division of
target_block by region_blocks.
This is the same value, just derived in a more straightforward way.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
verity_fec_decode() computes (offset, rsb) from the target block index
and calls fec_decode_rsb() with these parameters. Move this computation
into fec_decode_rsb(), and rename fec_decode_rsb() to fec_decode().
This ends up being simpler and enables further refactoring, specifically
making use of the quotient from the division more easily. The function
renaming also eliminates a reference to the ambiguous term "rsb".
This change does mean the same div64_u64_rem() can now be executed twice
per block, since verity_fec_decode() calls fec_decode() up to twice per
block. However, this cost is negligible compared to the rest of FEC.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
The current position in the output block buffer is called 'pos' in
fec_decode_rsb(), and 'block_offset' in fec_read_bufs() and
fec_decode_bufs(). These names aren't very clear, especially
'block_offset' which is easily confused with the offset of a message or
parity block or the position in the current parity block.
Rename it to 'out_pos'.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Since fec_read_bufs() deinterleaves the bytes from 'bbuf' sequentially
starting from 'block_offset', it can just do simple increments instead
of the more complex fec_buffer_rs_index() computation.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
fec_read_bufs() just iterates over a sequence of message blocks with
step size region_blocks. At each step, 'ileaved' is just the offset (in
bytes) to one of these blocks. Compute it in the straightforward way,
eliminating fec_interleave().
In more detail, previously the code computed
'ileaved = (n / k) + (n % k) * (region_blocks * block_size)'
where n = rsb * k + i and 0 <= i < k. Substituting 'n' gives:
ileaved = ((rsb * k + i) / k) + ((rsb * k + i) % k) * region_blocks * block_size
= rsb + (i * region_blocks * block_size)
The result is more efficient and easier to understand.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
To compute 'rsb', verity_fec_decode() divides 'offset' by
'v->fec->region_blocks << v->data_dev_block_bits', then subtracts the
quotient times that divisor. That's simply the long way to do a modulo
operation, i.e. a - b * floor(a / b) instead of just a % b. Use
div64_u64_rem() to get the remainder more concisely.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
It's hard to reconcile the value stored in dm_verity_fec::rounds with
its name and documentation. Most likely "rounds" is being used as an
alias for what is more commonly called the interleaving degree or
"number of ways". But the interleaving is done at the byte level,
whereas the units of "rounds" are blocks. So it's not really that.
In practice, the reason the code needs this value is that it expresses
the number of blocks in each "region" of the message data, where each
region contains the bytes from a particular index in the RS codewords.
Rename it to region_blocks to make the code a bit more understandable.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
dm-verity's FEC implementation assumes that data_block_size ==
hash_block_size, and it accesses the FEC device in units of the same
size. Many places in the code want that size and compute it on-demand
as '1 << v->data_dev_block_bits'. However, it's actually already
available in v->fec->io_size. Rename that field to block_size,
initialize it a bit earlier, and use it in the appropriate places.
Note that while these sizes could in principle be different, that case
is not supported. So there's no need to complicate the code for it.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
The literature refers to the unit of a Reed-Solomon (RS) code as either
a "block" or a "codeword".
dm-verity's source code uses "RS block". Unfortunately, that's really
confusing because "block" already means something else in dm-verity.
Especially problematic is the fact that dm-verity sometimes uses "RS
block" to mean an RS codeword and sometimes to mean some dm-verity block
that's related to the RS decoding process, for example one of the blocks
that shares its RS codewords with the target block.
Let's use "RS codeword" instead, or "RS message" when referring to just
the message part of the codeword. Update some comments, function names,
macro names, and variable names accordingly. No functional change.
There are still some remaining comments where "RS block" refers to a
dm-verity block. Later commits will handle these cases.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
"RS(n, k)" is by far the most common and standard notation for
describing Reed-Solomon codes. Each RS codeword consists of 'n'
symbols, divided into 'k' message symbols and 'n - k' parity symbols.
'n - k' is also the number of roots of the generator polynomial.
dm-verity uses "RS(M, N)" instead. I haven't been able to find any
other source that uses this convention. This quirk makes the code
harder to understand than necessary, especially due to dm-verity's 'N'
meaning something different from the standard 'n'.
Therefore, update dm-verity-fec.c and dm-verity-fec.h to use the
standard parameter names. No functional changes.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Every time DM_VERITY_FEC_{MAX,MIN}_RSN are used, they are subtracted
from DM_VERITY_FEC_RSM to get the bounds on the number of roots.
Therefore, replace these with {MIN,MAX}_ROOTS constants which are more
directly useful. (Note the inversion, where MAX_RSN maps to MIN_ROOTS
and MIN_RSN maps to MAX_ROOTS.) No functional change.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Update verity.rst to add a dedicated section about FEC and improve the
documentation for the FEC-related parameters.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Rename hash_blocks to hash_end to reflect what it actually is.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
fec_decode_bufs() assumes that the parity bytes of the first RS codeword
it decodes are never split across parity blocks.
This assumption is false. Consider v->fec->block_size == 4096 &&
v->fec->roots == 17 && fio->nbufs == 1, for example. In that case, each
call to fec_decode_bufs() consumes v->fec->roots * (fio->nbufs <<
DM_VERITY_FEC_BUF_RS_BITS) = 272 parity bytes.
Considering that the parity data for each message block starts on a
block boundary, the byte alignment in the parity data will iterate
through 272*i mod 4096 until the 3 parity blocks have been consumed. On
the 16th call (i=15), the alignment will be 4080 bytes into the first
block. Only 16 bytes remain in that block, but 17 parity bytes will be
needed. The code reads out-of-bounds from the parity block buffer.
Fortunately this doesn't normally happen, since it can occur only for
certain non-default values of fec_roots *and* when the maximum number of
buffers couldn't be allocated due to low memory. For example with
block_size=4096 only the following cases are affected:
fec_roots=17: nbufs in [1, 3, 5, 15]
fec_roots=19: nbufs in [1, 229]
fec_roots=21: nbufs in [1, 3, 5, 13, 15, 39, 65, 195]
fec_roots=23: nbufs in [1, 89]
Regardless, fix it by refactoring how the parity blocks are read.
Fixes: 6df90c02ba ("dm-verity FEC: Fix RS FEC repair for roots unaligned to block size (take 2)")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
At most 25 entries in dm_verity_fec_io::erasures are used: the maximum
number of FEC roots plus one. Therefore, set the array size
accordingly. This reduces the size of dm_verity_fec_io by 912 bytes.
Note: a later commit introduces a constant DM_VERITY_FEC_MAX_ROOTS,
which allows the size to be more clearly expressed as
DM_VERITY_FEC_MAX_ROOTS + 1. This commit just fixes the size first.
Fixes: a739ff3f54 ("dm verity: add support for forward error correction")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
dm_verity_fec::corrected seems to have been intended to count the number
of corrected blocks. However, it actually counted the number of calls
to fec_decode_bufs() that corrected at least one error. That's not the
same thing. For example, in low-memory situations correcting a single
block can require many calls to fec_decode_bufs().
Fix it to count corrected blocks instead.
Fixes: ae97648e14 ("dm verity fec: Expose corrected block count via status")
Cc: Shubhankar Mishra <shubhankarm@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fix verity_fec_ctr() to reject too-small hash devices by correctly
taking hash_start into account.
Note that this is necessary because dm-verity doesn't call
dm_bufio_set_sector_offset() on the hash device's bufio client
(v->bufio). Thus, dm_bufio_get_device_size(v->bufio) returns a size
relative to 0 rather than hash_start. An alternative fix would be to
call dm_bufio_set_sector_offset() on v->bufio, but then all the code
that reads from the hash device would have to be adjusted accordingly.
Fixes: a739ff3f54 ("dm verity: add support for forward error correction")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fix verity_fec_ctr() to reject too-small FEC devices by correctly
computing the number of parity blocks as 'f->rounds * f->roots'.
Previously it incorrectly used 'div64_u64(f->rounds * f->roots,
v->fec->roots << SECTOR_SHIFT)' which is a much smaller value.
Note that the units of 'rounds' are blocks, not bytes. This matches the
units of the value returned by dm_bufio_get_device_size(), which are
also blocks. A later commit will give 'rounds' a clearer name.
Fixes: a739ff3f54 ("dm verity: add support for forward error correction")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
The local variable region_count in create_log_context() is declared as
unsigned int (32-bit), but dm_sector_div_up() returns sector_t (64-bit).
When a device-mapper target has a sufficiently large ti->len with a small
region_size, the division result can exceed UINT_MAX. The truncated
value is then used to calculate bitset_size, causing clean_bits,
sync_bits, and recovering_bits to be allocated far smaller than needed
for the actual number of regions.
Subsequent log operations (log_set_bit, log_clear_bit, log_test_bit) use
region indices derived from the full untruncated region space, causing
out-of-bounds writes to kernel heap memory allocated by vmalloc.
This can be reproduced by creating a mirror target whose region_count
overflows 32 bits:
dmsetup create bigzero --table '0 8589934594 zero'
dmsetup create mymirror --table '0 8589934594 mirror \
core 2 2 nosync 2 /dev/mapper/bigzero 0 \
/dev/mapper/bigzero 0'
The status output confirms the truncation (sync_count=1 instead of
4294967297, because 0x100000001 was truncated to 1):
$ dmsetup status mymirror
0 8589934594 mirror 2 254:1 254:1 1/4294967297 ...
This leads to a kernel crash in core_in_sync:
BUG: scheduling while atomic: (udev-worker)/9150/0x00000000
RIP: 0010:core_in_sync+0x14/0x30 [dm_log]
CR2: 0000000000000008
Fixing recursive fault but reboot is needed!
Fix by widening the local region_count to sector_t and adding an
explicit overflow check before the value is assigned to lc->region_count.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
When failing to acquire the root_lock in dm_cache_metadata_abort because
the block_manager is read-only, the temporary block_manager created
outside the root_lock is not properly released, causing a memory leak.
Reproduce steps:
This can be reproduced by reloading a new table while the metadata
is read-only. While the second call to dm_cache_metadata_abort is
caused by lack of support for table preload in dm-cache, mentioned
in commit 9b1cc9f251 ("dm cache: share cache-metadata object across
inactive and active DM tables"), it exposes the memory leak in
dm_cache_metadata_abort when the function is called multiple times.
Specifically, dm-cache fails to sync the new cache object's mode during
preresume, creating the reproducer condition.
This issue could also occur through concurrent metadata_operation_failed
calls due to races in cache mode updates, but the table preload scenario
below provides a reliable reproducer.
1. Create a cache device with some faulty trailing metadata blocks
dmsetup create cmeta <<EOF
0 200 linear /dev/sdc 0
200 7992 error
EOF
dmsetup create cdata --table "0 131072 linear /dev/sdc 8192"
dmsetup create corig --table "0 262144 linear /dev/sdc 262144"
dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct
dmsetup create cache --table "0 131072 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 1 writethrough smq 0"
2. Suspend and resume the cache to start a new metadata transaction and
trigger metadata io errors on the next metadata commit.
dmsetup suspend cache
dmsetup resume cache
3. Write to the cache device to update metadata
fio --filename=/dev/mapper/cache --name test --rw=randwrite --bs=4k \
--randrepeat=0 --direct=1 --size 64k
4. Preload the same table
dmsetup reload cache --table "$(dmsetup table cache)"
5. Resume the new table. This triggers the memory leak.
dmsetup suspend cache
dmsetup resume cache
kmemleak logs:
<snip>
unreferenced object 0xffff8880080c2010 (size 16):
comm "dmsetup", pid 132, jiffies 4294982580
hex dump (first 16 bytes):
00 38 b9 07 80 88 ff ff 6a 6b 6b 6b 6b 6b 6b a5 ...
backtrace (crc 3118f31c):
kmemleak_alloc+0x28/0x40
__kmalloc_cache_noprof+0x3d9/0x510
dm_block_manager_create+0x51/0x140
dm_cache_metadata_abort+0x85/0x320
metadata_operation_failed+0x103/0x1e0
cache_preresume+0xacd/0xe70
dm_table_resume_targets+0xd3/0x320
__dm_resume+0x1b/0xf0
dm_resume+0x127/0x170
<snip>
Fixes: 352b837a55 ("dm cache: Fix ABBA deadlock between shrink_slab and dm_cache_metadata_abort")
Signed-off-by: Ming-Hung Tsai <mtsai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
The argument count calculation in create_dirty_log() performs
`*args_used = 2 + param_count` before validating against argc. When a
user provides a param_count close to UINT_MAX via the device mapper
table string, this unsigned addition wraps around to a small value,
causing the subsequent `argc < *args_used` check to be bypassed.
The overflowed param_count is then passed as argc to dm_dirty_log_create(),
where it can cause out-of-bounds reads on the argv array.
Fix by comparing param_count against argc - 2 before performing the
addition, following the same pattern used by parse_features() in the
same file. Since argc >= 2 is already guaranteed, the subtraction is
safe.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Reviewed-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
This attribute allows the compiler to refine compile-time diagnostics
and run-time sanitizer features with information about the size of the
flexible arrays.
Signed-off-by: Ken Raeburn <raeburn@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
We can infer the type needed from the supplied pointer argument. A
couple invocation sites needed fixing to supply the proper type of
pointer.
Use overflow.h's size_mul, and we can remove the __vdo_do_allocation
wrapper which did the same overflow check.
Signed-off-by: Ken Raeburn <raeburn@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
All of VDO's "extended" allocations use a flexible array field at the
end of the allocated structure. We can infer the struct type from the
supplied pointer. Replacing the array field type with the field name
lets us use struct_size from overflow.h to compute the size instead of
the local __vdo_do_allocation version.
One allocation of bio structures doesn't conform to this pattern,
since the removal of bi_inline_vecs; directly compute the total size
for that case.
Signed-off-by: Ken Raeburn <raeburn@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Make dm_ima_measure_on_table_load() use the SHA-256 library API instead
of crypto_shash to calculate the SHA-256 hash value that it needs. This
is simpler and more efficient. It also ensures that SHA-256 is actually
available and doesn't fail due to the unreliable loading by name.
While doing this, also use kasprintf() to simplify building the string
version of the digest.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Commit 5c977f1023 ("dm-mpath: Don't grab work_mutex while probing
paths"), added code to make multipath quit probing paths early, if it
was trying to suspend. This isn't necessary. It was just an optimization
to try to keep path probing from delaying a suspend. However it causes
problems with the intended user of this code, qemu. The path probing
code was added because failed ioctls to multipath devices don't cause
paths to fail in cases where a regular IO failure would.
If an ioctl to a path failed because the path was down, and the
multipath device had passed presuspend, the M_MPATH_PROBE_PATHS ioctl
would exit early, without probing the path. The caller would then retry
the original ioctl, hoping to use a different path. But if there was
only one path in the pathgroup, it would pick the same non-working path
again, even if there were working paths in other pathgroups.
ioctls to a suspended dm device will return -EAGAIN, notifying the
caller that the device is suspended, but ioctls to a device that is just
preparing to suspend won't (and in general, shouldn't). This means that
the caller (qemu in this case) would get into a tight loop where it
would issue an ioctl that failed, skip probing the paths because the
device had already passed presuspend, and start over issuing the ioctl
again. This would continue until the multipath device finally fully
suspended, or the caller gave up and failed the ioctl.
multipath's path probing code could return -EAGAIN in this case, and the
caller could delay a bit before retrying, but the whole purpose of
skipping the probe after presuspend was to speed things up, and that
would just slow them down. Instead, remove the is_suspending flag, and
check dm_suspended() instead to decide whether to exit the probing code
early. This means that when the probing code exits early, future ioctls
will also be delayed, because the device is fully suspended.
Fixes: 5c977f1023 ("dm-mpath: Don't grab work_mutex while probing paths")
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
dm-cache assumes all cache blocks are dirty when it recovers from an
unclean shutdown. Given that the passthrough mode doesn't handle dirty
blocks, we should not load a cache in passthrough mode if it was not
cleanly shut down; or we'll risk data loss while updating an actually
dirty block.
Also bump the target version to 2.4.0 to mark completion of passthrough
mode fixes.
Reproduce steps:
1. Create a writeback cache with zero migration_threshold to produce
dirty blocks.
dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
dmsetup create cdata --table "0 131072 linear /dev/sdc 8192"
dmsetup create corig --table "0 262144 linear /dev/sdc 262144"
dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct
dmsetup create cache --table "0 262144 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writeback smq \
2 migration_threshold 0"
2. Write the first cache block dirty
fio --filename=/dev/mapper/cache --name=populate --rw=write --bs=4k \
--direct=1 --size=64k
3. Ensure the number of dirty blocks is 1. This status query triggers
metadata commit without flushing the dirty bitset, setting up the
unclean shutdown state.
dmsetup status cache | awk '{print $14}'
4. Force reboot, leaving the cache uncleanly shutdown.
echo b > /proc/sysrq-trigger
5. Activate the above cache components, and verify the first data block
remains dirty.
dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
dmsetup create cdata --table "0 131072 linear /dev/sdc 8192"
dmsetup create corig --table "0 262144 linear /dev/sdc 262144"
dd if=/dev/mapper/cdata of=/tmp/cb0.bin bs=64k count=1
dd if=/dev/mapper/corig of=/tmp/ob0.bin bs=64k count=1
md5sum /tmp/cb0.bin /tmp/ob0.bin # expected to be different
6. Try bringing up the cache in passthrough mode. It succeeds, while the
first cache block was loaded dirty due to unclean shutdown, violates
the passthrough mode's constraints.
dmsetup create cache --table "0 262144 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 passthrough smq 0"
dmsetup status cache | awk '{print $14}'
7. (Optional) Demonstrate the integrity issue: invalidating the dirty
block in passthrough mode doesn't write back the dirty data, causing
data loss.
fio --filename=/dev/mapper/cache --name=invalidate --rw=write --bs=4k \
--direct=1 --size=4k # overwrite the first 4k to trigger invalidation
dmsetup remove cache
dd if=/dev/mapper/corig of=/tmp/ob0new.bin bs=64k count=1
cb0sum=$(dd if=/tmp/cb0.bin bs=4k count=15 skip=1 | md5sum | \
awk '{print $1}')
ob0newsum=$(dd if=/tmp/ob0new.bin bs=4k count=15 skip=1 | md5sum | \
awk '{print $1}')
echo "$cb0sum, $ob0newsum" # remaining 60k should differ (data loss)
Signed-off-by: Ming-Hung Tsai <mtsai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
As mentioned in commit 9b1cc9f251 ("dm cache: share cache-metadata
object across inactive and active DM tables"), dm-cache assumed table
reload occurs after suspension, while LVM's table preload breaks this
assumption. The dirty mapping check for passthrough mode was designed
around this assumption and is performed during table creation, causing
the check to fail with preload while metadata updates are ongoing. This
risks loading dirty mappings into passthrough mode, resulting in data
loss.
Reproduce steps:
1. Create a writeback cache with zero migration_threshold to produce
dirty mappings
dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
dmsetup create cdata --table "0 131072 linear /dev/sdc 8192"
dmsetup create corig --table "0 262144 linear /dev/sdc 262144"
dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct
dmsetup create cache --table "0 262144 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writeback smq \
2 migration_threshold 0"
2. Preload a table in passthrough mode
dmsetup reload cache --table "0 262144 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 passthrough smq 0"
3. Write to the first cache block to make it dirty
fio --filename=/dev/mapper/cache --name=populate --rw=write --bs=4k \
--direct=1 --size=64k
4. Resume the inactive table. Now it's possible to load the dirty block
into passthrough mode.
dmsetup resume cache
Fix by moving the checks to the preresume phase to support table
preloading. Also remove the unused function dm_cache_metadata_all_clean.
Fixes: 2ee57d5873 ("dm cache: add passthrough mode")
Signed-off-by: Ming-Hung Tsai <mtsai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
In passthrough mode, the policy invalidate_mapping operation is called
simultaneously from multiple workers, thus it should be protected by a
lock. Otherwise, we might end up with data races on the allocated blocks
counter, or even use-after-free issues with internal data structures
when doing concurrent writes.
Note that the existing FIXME in smq_invalidate_mapping() doesn't affect
passthrough mode since migration tasks don't exist there, but would need
attention if supporting fast device shrinking via suspend/resume without
target reloading.
Reproduce steps:
1. Create a cache device consisting of 1024 cache entries
dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
dmsetup create cdata --table "0 131072 linear /dev/sdc 8192"
dmsetup create corig --table "0 262144 linear /dev/sdc 262144"
dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct
dmsetup create cache --table "0 262144 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0"
2. Populate the cache, and record the number of cached blocks
fio --name=populate --filename=/dev/mapper/cache --rw=randwrite --bs=4k \
--size=64m --direct=1
nr_cached=$(dmsetup status cache | awk '{split($7, a, "/"); print a[1]}')
3. Reload the cache into passthrough mode
dmsetup suspend cache
dmsetup reload cache --table "0 262144 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 passthrough smq 0"
dmsetup resume cache
4. Write to the passthrough cache. By setting multiple jobs with I/O
size equal to the cache block size, cache blocks are invalidated
concurrently from different workers.
fio --filename=/dev/mapper/cache --name=test --rw=randwrite --bs=64k \
--direct=1 --numjobs=2 --randrepeat=0 --size=64m
5. Check if demoted matches cached block count. These numbers should
match but may differ due to the data race.
nr_demoted=$(dmsetup status cache | awk '{print $12}')
echo "$nr_cached, $nr_demoted"
Fixes: b29d4986d0 ("dm cache: significant rework to leverage dm-bio-prison-v2")
Signed-off-by: Ming-Hung Tsai <mtsai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
The invalidate_remove() function has incomplete logic for handling write
hit bios after cache invalidation. It sets up the remapping for the
overwrite_bio but then drops it immediately without submission, causing
write operations to hang.
Fix by adding a new invalidate_committed() continuation that submits
the remapped writes to the cache origin after metadata commit completes,
while using the overwrite_endio hook to ensure proper completion
sequencing. This maintains existing coherency. Also improve error
handling in invalidate_complete() to preserve the original error status
instead of using bio_io_error() unconditionally.
Fixes: b29d4986d0 ("dm cache: significant rework to leverage dm-bio-prison-v2")
Signed-off-by: Ming-Hung Tsai <mtsai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Verify the old zone count has a valid value before using
it to compute slab summary entry offsets.
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Verify that the loaded zone count is in the valid range
before using it as a loop iterator.
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
* Make sure we don't leak any S1POE state from guest to guest when
the feature is supported on the HW, but not enabled on the host
* Propagate the ID registers from the host into non-protected VMs
managed by pKVM, ensuring that the guest sees the intended feature set
* Drop double kern_hyp_va() from unpin_host_sve_state(), which could
bite us if we were to change kern_hyp_va() to not being idempotent
* Don't leak stage-2 mappings in protected mode
* Correctly align the faulting address when dealing with single page
stage-2 mappings for PAGE_SIZE > 4kB
* Fix detection of virtualisation-capable GICv5 IRS, due to the
maintainer being obviously fat fingered... [his words, not mine]
* Remove duplication of code retrieving the ASID for the purpose of
S1 PT handling
* Fix slightly abusive const-ification in vgic_set_kvm_info()
Generic:
* Remove internal Kconfigs that are now set on all architectures.
* Remove per-architecture code to enable KVM_CAP_SYNC_MMU, all
architectures finally enable it in Linux 7.0.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmmkSMUUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroO2tggAgOHvH9lwgHxFADAOKXPEsv+Tw6cB
zuUBPo6e5XQQx6BJQVo8ctveCBbA0ybRJXbju6lgS/Bg9qQYKjZbNrYdKwBwhw3b
JBUFTIJgl7lLU5gEANNtvgiiNUc2z1GfG8NQ5ovMJ0/MDEEI0YZjkGoe8ZyJ54vg
qrNHBROKvt54wVHXFGhZ1z8u4RqJ/WCmy21wYbwiMgQGXq9ugRRfhnu3iGNO8BcK
bSSh4cP7qusO5Nj0m/XYD/68VwvyogaEkh4sNS1VH0FOoONRWs80Q6iT2HjCGgv6
mAzCx/yB9ziSQRis3oYYEBH23HZxRVDVBeSBlPcbxE3VM7SGzp7O8L692g==
=+mC+
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Arm:
- Make sure we don't leak any S1POE state from guest to guest when
the feature is supported on the HW, but not enabled on the host
- Propagate the ID registers from the host into non-protected VMs
managed by pKVM, ensuring that the guest sees the intended feature
set
- Drop double kern_hyp_va() from unpin_host_sve_state(), which could
bite us if we were to change kern_hyp_va() to not being idempotent
- Don't leak stage-2 mappings in protected mode
- Correctly align the faulting address when dealing with single page
stage-2 mappings for PAGE_SIZE > 4kB
- Fix detection of virtualisation-capable GICv5 IRS, due to the
maintainer being obviously fat fingered... [his words, not mine]
- Remove duplication of code retrieving the ASID for the purpose of
S1 PT handling
- Fix slightly abusive const-ification in vgic_set_kvm_info()
Generic:
- Remove internal Kconfigs that are now set on all architectures
- Remove per-architecture code to enable KVM_CAP_SYNC_MMU, all
architectures finally enable it in Linux 7.0"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: always define KVM_CAP_SYNC_MMU
KVM: remove CONFIG_KVM_GENERIC_MMU_NOTIFIER
KVM: arm64: Deduplicate ASID retrieval code
irqchip/gic-v5: Fix inversion of IRS_IDR0.virt flag
KVM: arm64: Revert accidental drop of kvm_uninit_stage2_mmu() for non-NV VMs
KVM: arm64: Fix protected mode handling of pages larger than 4kB
KVM: arm64: vgic: Handle const qualifier from gic_kvm_info allocation type
KVM: arm64: Remove redundant kern_hyp_va() in unpin_host_sve_state()
KVM: arm64: Fix ID register initialization for non-protected pKVM guests
KVM: arm64: Optimise away S1POE handling when not supported by host
KVM: arm64: Hide S1POE from guests when not supported by the host
The deferred page initialization prevents debug objects from allocating
slab pages until the initialization is complete. That causes depletion of
the pool and disabling of debugobjects.
The reason is that debugobjects uses __GFP_HIGH for allocations as it might
be invoked from arbitrary contexts. When PREEMPT_COUNT is disabled there is
no way to know whether the context is safe to set __GFP_KSWAPD_RECLAIM.
This worked until v6.18. Since then allocations w/o a reclaim flag cause
new_slab() to end up in alloc_frozen_pages_nolock_noprof(), which returns
early when deferred page initialization has not yet completed.
Work around that when PREEMPT_COUNT is enabled as the preempt counter
allows debugobjects to add __GFP_KSWAPD_RECLAIM to the GFP flags when the
context is preemtible. When PREEMPT_COUNT is disabled the context is
unknown and the reclaim bit can't be set because the caller might hold
locks which might deadlock in the allocator.
That makes debugobjects depend on PREEMPT_COUNT || !DEFERRED_STRUCT_PAGE_INIT,
which limits the coverage slightly, but keeps it functional for most cases.
-----BEGIN PGP SIGNATURE-----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=kvxN
-----END PGP SIGNATURE-----
Merge tag 'core-debugobjects-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull debugobjects fix from Thomas Gleixner:
"A single fix for debugobjects.
The deferred page initialization prevents debug objects from
allocating slab pages until the initialization is complete. That
causes depletion of the pool and disabling of debugobjects.
The reason is that debugobjects uses __GFP_HIGH for allocations as it
might be invoked from arbitrary contexts. When PREEMPT_COUNT is
disabled there is no way to know whether the context is safe to set
__GFP_KSWAPD_RECLAIM.
This worked until v6.18. Since then allocations w/o a reclaim flag
cause new_slab() to end up in alloc_frozen_pages_nolock_noprof(),
which returns early when deferred page initialization has not yet
completed.
Work around that when PREEMPT_COUNT is enabled as the preempt counter
allows debugobjects to add __GFP_KSWAPD_RECLAIM to the GFP flags when
the context is preemtible. When PREEMPT_COUNT is disabled the context
is unknown and the reclaim bit can't be set because the caller might
hold locks which might deadlock in the allocator.
That makes debugobjects depend on PREEMPT_COUNT ||
!DEFERRED_STRUCT_PAGE_INIT, which limits the coverage slightly, but
keeps it functional for most cases"
* tag 'core-debugobjects-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
debugobject: Make it work with deferred page initialization - again
- Fix speculative safety in fred_extint()
- Fix __WARN_printf() trap in early_fixup_exception()
- Fix clang-build boot bug for unusual alignments,
triggered by CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B=y
- Replace the final few __ASSEMBLY__ stragglers that snuck
in lately into non-UAPI x86 headers and use __ASSEMBLER__
consistently (again).
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=A61U
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Fix speculative safety in fred_extint()
- Fix __WARN_printf() trap in early_fixup_exception()
- Fix clang-build boot bug for unusual alignments, triggered by
CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B=y
- Replace the final few __ASSEMBLY__ stragglers that snuck in lately
into non-UAPI x86 headers and use __ASSEMBLER__ consistently (again)
* tag 'x86-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/headers: Replace __ASSEMBLY__ stragglers with __ASSEMBLER__
x86/cfi: Fix CFI rewrite for odd alignments
x86/bug: Handle __WARN_printf() trap in early_fixup_exception()
x86/fred: Correct speculative safety in fred_extint()
for the common HZ=100, 250 or 1000 cases, only inlining them
for odd HZ values like HZ=300.
The inlining overhead showed up in performance tests of the TCP code.
(Marked as an RFC pull request, as it's not a regression.)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=duTI
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Ingo Molnar:
"Improve the inlining of jiffies_to_msecs() and jiffies_to_usecs(), for
the common HZ=100, 250 or 1000 cases. Only use a function call for odd
HZ values like HZ=300 that generate more code.
The function call overhead showed up in performance tests of the TCP
code"
* tag 'timers-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time/jiffies: Inline jiffies_to_msecs() and jiffies_to_usecs()
- Fix zero_vruntime tracking when there's a single task running
- Fix slice protection logic
- Fix the ->vprot logic for reniced tasks
- Fix lag clamping in mixed slice workloads
- Fix objtool uaccess warning (and bug) in the
!CONFIG_RSEQ_SLICE_EXTENSION case caused by unexpected
un-inlining, which triggers with older compilers
- Fix a comment in the rseq registration rseq_size bound check code
- Fix a legacy RSEQ ABI quirk that handled 32-byte area sizes
differently, which special size we now reached naturally and
want to avoid. The visible ugliness of the new reserved field
will be avoided the next time the RSEQ area is extended.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Nxqx
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
- Fix zero_vruntime tracking when there's a single task running
- Fix slice protection logic
- Fix the ->vprot logic for reniced tasks
- Fix lag clamping in mixed slice workloads
- Fix objtool uaccess warning (and bug) in the
!CONFIG_RSEQ_SLICE_EXTENSION case caused by unexpected un-inlining,
which triggers with older compilers
- Fix a comment in the rseq registration rseq_size bound check code
- Fix a legacy RSEQ ABI quirk that handled 32-byte area sizes
differently, which special size we now reached naturally and want to
avoid. The visible ugliness of the new reserved field will be avoided
the next time the RSEQ area is extended.
* tag 'sched-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq: slice ext: Ensure rseq feature size differs from original rseq size
rseq: Clarify rseq registration rseq_size bound check comment
sched/core: Fix wakeup_preempt's next_class tracking
rseq: Mark rseq_arm_slice_extension_timer() __always_inline
sched/fair: Fix lag clamp
sched/eevdf: Update se->vprot in reweight_entity()
sched/fair: Only set slice protection at pick time
sched/fair: Fix zero_vruntime tracking
- Fix lock ordering bug found by lockdep in perf_event_wakeup()
- Fix uncore counter enumeration on Granite Rapids and Sierra Forest
- Fix perf_mmap() refcount bug found by Syzkaller
- Fix __perf_event_overflow() vs. perf_remove_from_context() race
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=0JyK
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events fixes from Ingo Molnar:
- Fix lock ordering bug found by lockdep in perf_event_wakeup()
- Fix uncore counter enumeration on Granite Rapids and Sierra Forest
- Fix perf_mmap() refcount bug found by Syzkaller
- Fix __perf_event_overflow() vs perf_remove_from_context() race
* tag 'perf-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix __perf_event_overflow() vs perf_remove_from_context() race
perf/core: Fix refcount bug and potential UAF in perf_mmap
perf/x86/intel/uncore: Add per-scheduler IMC CAS count events
perf/core: Fix invalid wait context in ctx_sched_in()
version to use the new CONFIG_WARN_CONTEXT_ANALYSIS feature.
In particular this avoids the widely used Android clang 22.0.1
pre-release build which is known to be broken for this usecase.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=KdpZ
-----END PGP SIGNATURE-----
Merge tag 'locking-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Ingo Molnar:
"Now that LLVM 22 has been released officially, require a release
version to use the new CONFIG_WARN_CONTEXT_ANALYSIS feature.
In particular this avoids the widely used Android clang 22.0.1
pre-release build which is known to be broken for this usecase"
* tag 'locking-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
lib/Kconfig.debug: Require a release version of LLVM 22 for context analysis
- Fix frozen interrupt bug in the sifive-plic driver
- Limit per-device MSI interrupts on uncommon gic-v3-its
hardware variants
- Address Sparse warning by constifying a variable in
the MMP driver
- Revert broken commit and also fix an error check
in the ls-extirq driver
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=hIKS
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irqchip driver fixes from Ingo Molnar:
- Fix frozen interrupt bug in the sifive-plic driver
- Limit per-device MSI interrupts on uncommon gic-v3-its hardware
variants
- Address Sparse warning by constifying a variable in the MMP driver
- Revert broken commit and also fix an error check in the ls-extirq
driver
* tag 'irq-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/ls-extirq: Fix devm_of_iomap() error check
Revert "irqchip/ls-extirq: Use for_each_of_imap_item iterator"
irqchip/mmp: Make icu_irq_chip variable static const
irqchip/gic-v3-its: Limit number of per-device MSIs to the range the ITS supports
irqchip/sifive-plic: Fix frozen interrupt due to affinity setting
All changes in drivers (well technically ses is enclosure services,
but its change is minor). The biggest is the write combining change
in lpfc followed by the additional NULL checks in mpi3mr.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iLgEABMIAGAWIQTnYEDbdso9F2cI+arnQslM7pishQUCaaO9chsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMiwyLDImHGphbWVzLmJvdHRvbWxleUBoYW5zZW5wYXJ0bmVy
c2hpcC5jb20ACgkQ50LJTO6YrIU8tQEAiyqxkTmD84X/4hL8+x+lxAI+lYmsGRfZ
4A4Xtx+B5vgBAK5mT+TEGBNVoGgpsWoDEa3xj6edz1jQMTiwnzhpnwql
=FqRP
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"All changes in drivers (well technically SES is enclosure services,
but its change is minor). The biggest is the write combining change in
lpfc followed by the additional NULL checks in mpi3mr"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Fix shift out of bounds when MAXQ=32
scsi: ufs: core: Move link recovery for hibern8 exit failure to wl_resume
scsi: ufs: core: Fix possible NULL pointer dereference in ufshcd_add_command_trace()
scsi: snic: MAINTAINERS: Update snic maintainers
scsi: snic: Remove unused linkstatus
scsi: pm8001: Fix use-after-free in pm8001_queue_command()
scsi: mpi3mr: Add NULL checks when resetting request and reply queues
scsi: ufs: core: Reset urgent_bkops_lvl to allow runtime PM power mode
scsi: ses: Fix devices attaching to different hosts
scsi: ufs: core: Fix RPMB region size detection for UFS 2.2
scsi: storvsc: Fix scheduling while atomic on PREEMPT_RT
scsi: lpfc: Properly set WC for DPP mapping
