On i386 size_t is of course 32bits and using long int throws warnings,
trivially fix it by using the dedicated size_t format.
This is enough to fix the following warning found by the kernel test
robot:
drivers/gpu/drm/vmwgfx/vmwgfx_gem.c: In function 'vmw_bo_print_info':
>> drivers/gpu/drm/vmwgfx/vmwgfx_gem.c:230:33: warning: format '%ld'
expects argument of type 'long int', but argument 4 has type 'size_t'
{aka 'unsigned int'} [-Wformat=]
230 | seq_printf(m, "\t\t0x%08x: %12ld bytes %s, type = %s",
| ~~~~^
| |
| long int
| %12d
231 | id, bo->base.base.size, placement, type);
| ~~~~~~~~~~~~~~~~~~
| |
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Fixes: 8afa13a058 ("drm/vmwgfx: Implement DRIVER_GEM")
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211215184147.3688785-1-zack@kde.org
(cherry picked from commit 72345114c9)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Drop superfluous "the" from the comment in line 15.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
[ rjw: Subject edit, new changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Second set of patches for v5.17, planning to do at least one more.
Smaller new features, nothing special this time.
Major changes:
rtw88
* debugfs file to fix tx rate
iwlwifi
* support SAR GEO Offset Mapping (SGOM) via BIOS
* support firmware API version 68
* add some new device IDs
ath11k
* support PCI devices with 1 MSI vector
* WCN6855 hw2.1 support
* 11d scan offload support
* full monitor mode, only supported on QCN9074
* scan MAC address randomization support
* reserved host DDR addresses from DT for PCI devices support
ath9k
* switch to rate table based lookup
ath
* extend South Korea regulatory domain support
wcn36xx
* beacon filter support
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmG8i3cRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZumyAf7BlhO1TUuwhhs9y6fi6KLa/pEOmkx2SRf
9AuEfxxrLPhlzh29Dz4Bn8B+KBG6HFQ1FngSwIAVjLL5pX/1ARBMx9B2TDf9p/Sb
UgkE6WOX29s7LXuC2lDnBnvnKbf5/rdLmZPZCFCv/iKaGAJAYYXYSQjtj5/Fmdkc
PhQNgALWG9a02bfSLk1MlF1lCqt0hsKFQkza29jTa9CKcWYZFK3sTl1spbHAN5yQ
YJMecy+fSxCSuJPZB3elG5os69sz3WGoFY/AYCWoUODNZo18Z4kiAXwurPDIM+GW
3e/lzXe29V1TB36haNe9/C5F2uwoYWGSoWwHcZ62lLpNhJ649wJDbw==
=4wFO
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-next-2021-12-17' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
wireless-drivers-next patches for v5.17
Second set of patches for v5.17, planning to do at least one more.
Smaller new features, nothing special this time.
Major changes:
rtw88
* debugfs file to fix tx rate
iwlwifi
* support SAR GEO Offset Mapping (SGOM) via BIOS
* support firmware API version 68
* add some new device IDs
ath11k
* support PCI devices with 1 MSI vector
* WCN6855 hw2.1 support
* 11d scan offload support
* full monitor mode, only supported on QCN9074
* scan MAC address randomization support
* reserved host DDR addresses from DT for PCI devices support
ath9k
* switch to rate table based lookup
ath
* extend South Korea regulatory domain support
wcn36xx
* beacon filter support
* tag 'wireless-drivers-next-2021-12-17' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next: (129 commits)
wcn36xx: Implement beacon filtering
wcn36xx: Fix physical location of beacon filter comment
wcn36xx: Fix beacon filter structure definitions
ath11k: Use reserved host DDR addresses from DT for PCI devices
dt: bindings: add new DT entry for ath11k PCI device support
wilc1000: Improve WILC TX performance when power_save is off
wl1251: specify max. IE length
rsi: fix array out of bound
wilc1000: Rename workqueue from "WILC_wq" to "NETDEV-wq"
wilc1000: Rename tx task from "K_TXQ_TASK" to NETDEV-tx
wilc1000: Rename irq handler from "WILC_IRQ" to netdev name
wilc1000: Rename SPI driver from "WILC_SPI" to "wilc1000_spi"
wilc1000: Fix spurious "FW not responding" error
wilc1000: Remove misleading USE_SPI_DMA macro
wilc1000: Fix missing newline in error message
wilc1000: Fix copy-and-paste typo in wilc_set_mac_address
rtw89: coex: Update COEX to 5.5.8
rtw89: coex: Cancel PS leaving while C2H comes
rtw89: coex: Update BT counters while receiving report
rtw89: coex: Define LPS state for BTC using
...
====================
Link: https://lore.kernel.org/r/20211217130952.34887C36AE9@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit 796eed4b23.
This change causes boot lockups when using "arlyprintk=xdbc" because
ktime can not be used at this point in time in the boot process. Also,
it is not needed for very small delays like this.
Reported-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Cc: Jann Horn <jannh@google.com>
Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>
Fixes: 796eed4b23 ("usb: early: convert to readl_poll_timeout_atomic()")
Link: https://lore.kernel.org/r/c2b5c9bb-1b75-bf56-3754-b5b18812d65e@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is not necessary to call intel_pstate_get_hwp_cap() from
intel_pstate_update_perf_limits(), because it gets called from
intel_pstate_verify_cpu_policy() which is either invoked directly
right before intel_pstate_update_perf_limits(), in
intel_cpufreq_verify_policy() in the passive mode, or called
from driver callbacks in a sequence that causes it to be followed
by an immediate intel_pstate_update_perf_limits().
Namely, in the active mode intel_cpufreq_verify_policy() is called
by intel_pstate_verify_policy() which is the ->verify() callback
routine of intel_pstate and gets called by the cpufreq core right
before intel_pstate_set_policy(), which is the driver's ->setoplicy()
callback routine, where intel_pstate_update_perf_limits() is called.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Because refcount_dec_not_one() returns true if the target refcount
becomes saturated, it is generally unsafe to use its return value as
a loop termination condition, but that is what happens when a device
link's supplier device is released during runtime PM suspend
operations and on device link removal.
To address this, introduce pm_runtime_release_supplier() to be used
in the above cases which will check the supplier device's runtime
PM usage counter in addition to the refcount_dec_not_one() return
value, so the loop can be terminated in case the rpm_active refcount
value becomes invalid, and update the code in question to use it as
appropriate.
This change is not expected to have any visible functional impact.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Fix function name in sysfs.c kernel-doc comment
to remove a warning found by running scripts/kernel-doc,
which is caused by using 'make W=1'.
drivers/cpuidle/sysfs.c:512: warning: expecting prototype for
cpuidle_remove_driver_sysfs(). Prototype was for
cpuidle_remove_state_sysfs() instead
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In some cases (for example, during system-wide suspend and resume of
devices) it is useful to know whether or not runtime PM has ever been
enabled for a given device and, if so, what the runtime PM status of
it had been right before runtime PM was disabled for it last time.
For this reason, introduce a new struct dev_pm_info field called
last_status that will be used for capturing the runtime PM status of
the device when its power.disable_depth counter changes from 0 to 1.
The new field will be set to RPM_INVALID to start with and whenever
power.disable_depth changes from 1 to 0, so it will be valid only
when runtime PM of the device is currently disabled, but it has been
enabled at least once.
Immediately use power.last_status in rpm_resume() to make it handle
the case when PM runtime is disabled for the device, but its runtime
PM status is RPM_ACTIVE more consistently. Namely, make it return 1
if power.last_status is also equal to RPM_ACTIVE in that case (the
idea being that if the status was RPM_ACTIVE last time when
power.disable_depth was changing from 0 to 1 and it is still
RPM_ACTIVE, it can be assumed to reflect what happened to the device
last time when it was using runtime PM) and -EACCES otherwise.
Update the documentation to provide a description of last_status and
change the description of pm_runtime_resume() in it to reflect the
new behavior of rpm_active().
While at it, rearrange the code in pm_runtime_enable() to be more
straightforward and replace the WARN() macro in it with a pr_warn()
invocation which is less disruptive.
Link: https://lore.kernel.org/linux-pm/20211026222626.39222-1-ulf.hansson@linaro.org/t/#u
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
On Sapphire Rapids, the layout of the Psys domain Power Limit Register
is different from from what it was before.
Enhance the code to support the new Psys PL register layout.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reported-and-tested-by: Alkattan Dana <dana.alkattan@intel.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Enable support for the new R-Car S4-8 SoC in the arm64 defconfig.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYbxfrQAKCRCKwlD9ZEnx
cN4JAP9GUQoB0x+Cw30qvh+Hp/U3UdcbtK9dNPElNp9r0vx9CAEA76Uy6+Byspee
RBPpKQDK7gWr8LrioHFLOTROLeTbnQw=
=0D6v
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=X44H
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-defconfig-for-v5.17-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig
Renesas ARM defconfig updates for v5.17
- Enable support for the new R-Car S4-8 SoC in the arm64 defconfig.
* tag 'renesas-arm-defconfig-for-v5.17-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: defconfig: Enable R-Car S4-8
Link: https://lore.kernel.org/r/cover.1639736717.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit introduces the following macros:
SYSTEM_SLEEP_PM_OPS()
LATE_SYSTEM_SLEEP_PM_OPS()
NOIRQ_SYSTEM_SLEEP_PM_OPS()
RUNTIME_PM_OPS()
These new macros are very similar to their SET_*_PM_OPS() equivalent.
They however differ in the fact that the callbacks they set will always
be seen as referenced by the compiler. This means that the callback
functions don't need to be wrapped with a #ifdef CONFIG_PM guard, or
tagged with __maybe_unused, to prevent the compiler from complaining
about unused static symbols. The compiler will then simply evaluate at
compile time whether or not these symbols are dead code.
The callbacks that are only useful with CONFIG_PM_SLEEP is enabled, are
now also wrapped with a new pm_sleep_ptr() macro, which is inspired from
pm_ptr(). This is needed for drivers that use different callbacks for
sleep and runtime PM, to handle the case where CONFIG_PM is set and
CONFIG_PM_SLEEP is not.
This commit also deprecates the following macros:
SIMPLE_DEV_PM_OPS()
UNIVERSAL_DEV_PM_OPS()
And introduces the following macros:
DEFINE_SIMPLE_DEV_PM_OPS()
DEFINE_UNIVERSAL_DEV_PM_OPS()
These macros are similar to the functions they were created to replace,
with the following differences:
- They use the new macros introduced above, and as such always
reference the provided callback functions.
- They are not tagged with __maybe_unused. They are meant to be used
with pm_ptr() or pm_sleep_ptr() for DEFINE_UNIVERSAL_DEV_PM_OPS()
and DEFINE_SIMPLE_DEV_PM_OPS() respectively.
- They declare the symbol static, since every driver seems to do that
anyway; and if a non-static use-case is needed an indirection pointer
could be used.
The point of this change, is to progressively switch from a code model
where PM callbacks are all protected behind CONFIG_PM guards, to a code
model where the PM callbacks are always seen by the compiler, but
discarded if not used.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The pm_ptr() macro was previously conditionally defined, according to
the value of the CONFIG_PM option. This meant that the pointed structure
was either referenced (if CONFIG_PM was set), or never referenced (if
CONFIG_PM was not set), causing it to be detected as unused by the
compiler.
This worked fine, but required the __maybe_unused compiler attribute to
be used to every symbol pointed to by a pointer wrapped with pm_ptr().
We can do better. With this change, the pm_ptr() is now defined the
same, independently of the value of CONFIG_PM. It now uses the (?:)
ternary operator to conditionally resolve to its argument. Since the
condition is known at compile time, the compiler will then choose to
discard the unused symbols, which won't need to be tagged with
__maybe_unused anymore.
This pm_ptr() macro is usually used with pointers to dev_pm_ops
structures created with SIMPLE_DEV_PM_OPS() or similar macros. These do
use a __maybe_unused flag, which is now useless with this change, so it
later can be removed. However in the meantime it causes no harm, and all
the drivers still compile fine with the new pm_ptr() macro.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The pm_ptr() macro should be used when the suspend and resume functions
can be compiled independently of the CONFIG_PM Kconfig option.
In the case of this driver, the suspend and resume functions are inside
a section protected by a #ifdef CONFIG_PM guard. Therefore pm_ptr()
should not be used.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Convert the Broadcom SATA3 AHCI controller Device Tree binding to YAML
to help with validation.
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211217042001.479577-5-f.fainelli@gmail.com
- Initial support for the R-Car S4-8 SoC on the Spider CPU and
BreakOut boards,
- MIPI DSI display support for the R-Car V3u SoC and the Falcon board
stack,
- Thermal and GPU support for the RZ/G2L SoC and the RZ/G2L SMARC EVK
development board,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYbxhigAKCRCKwlD9ZEnx
cOG8AQCFiS+sBx/X7GiG6fshCBhGw4f+9+jsNl2ucQMmUe9YqAEA83HjBLSQ/DnP
h/VI9JfeGdcyTseWFJwXzm8XChcdWwI=
=sQeE
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=1udU
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-dt-for-v5.17-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM DT updates for v5.17 (take two)
- Initial support for the R-Car S4-8 SoC on the Spider CPU and
BreakOut boards,
- MIPI DSI display support for the R-Car V3u SoC and the Falcon board
stack,
- Thermal and GPU support for the RZ/G2L SoC and the RZ/G2L SMARC EVK
development board,
- Miscellaneous fixes and improvements.
* tag 'renesas-arm-dt-for-v5.17-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: Fix pin controller node names
arm64: dts: renesas: rzg2l-smarc-som: Add vdd core regulator
arm64: dts: renesas: r9a07g044: Add Mali-G31 GPU node
arm64: dts: renesas: r9a07g044: Create thermal zone to support IPA
arm64: dts: renesas: r9a07g044: Add TSU node
arm64: dts: renesas: falcon-cpu: Add DSI display output
arm64: dts: renesas: r8a779a0: Add DSI encoders
arm64: dts: renesas: Add Renesas Spider boards support
arm64: dts: renesas: Add Renesas R8A779F0 SoC support
dt-bindings: clock: Add r8a779f0 CPG Core Clock Definitions
dt-bindings: power: Add r8a779f0 SYSC power domain definitions
arm64: dts: renesas: Fix thermal bindings
Link: https://lore.kernel.org/r/cover.1639736718.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Fixes a race when a tee_shm reaches reference count 0 and is about to
be teared down
- Fixes an incorrect page free bug in an error path of the OP-TEE shared
memory pool handling
- Suppresses a false positive kmemleak report when allocating driver
private shared memory buffers for OP-TEE
-----BEGIN PGP SIGNATURE-----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=3cqK
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=125d
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-v5.16' of https://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes
TEE and OP-TEE fixes for v5.16
- Fixes a race when a tee_shm reaches reference count 0 and is about to
be teared down
- Fixes an incorrect page free bug in an error path of the OP-TEE shared
memory pool handling
- Suppresses a false positive kmemleak report when allocating driver
private shared memory buffers for OP-TEE
* tag 'fixes-for-v5.16' of https://git.linaro.org/people/jens.wiklander/linux-tee:
optee: Suppress false positive kmemleak report in optee_handle_rpc()
tee: optee: Fix incorrect page free bug
tee: handle lookup of shm with reference count 0
Link: https://lore.kernel.org/r/20211216150745.GA3347954@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Document new OPP table and power domain properties of the video decoder
hardware.
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Memory Client should be blocked before hardware reset is asserted in order
to prevent memory corruption and hanging of memory controller.
Document Memory Client resets of Host1x, GR2D and GR3D hardware units.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Document new DVFS OPP table and power domain properties of the Host1x bus
and devices sitting on the bus.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Document sub-nodes which describe Tegra SoC clocks that require a higher
voltage of the core power domain in order to operate properly on a higher
clock rates. Each node contains a phandle to OPP table and power domain.
The root PLLs and system clocks don't have any specific device dedicated
to them, clock controller is in charge of managing power for them.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Document Tegra20/30/114-based ASUS Transformer Series tablet devices.
This group includes EeePad TF101, Prime TF201, Pad TF300T, TF300TG
Infinity TF700T, TF701T.
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Anton Bambura <jenneron@protonmail.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add the interconnects, interconnect-names and iommus properties to the
device tree bindings for the Tegra XUDC controller. These are used to
describe the device's paths to and from memory.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add the compatible string for the TCU found on the Tegra234 SoC.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Convert the Tegra TCU device tree bindings to json-schema.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Convert the Tegra186 (and later) BPMP thermal device tree bindings from
the free-form text format to json-schema.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Convert the NVIDIA Tegra186 (and later) BPMP bindings from the free-form
text format to json-schema.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Convert the NVIDIA Tegra186 (and later) PMC bindings from the free-form
text format to json-schema.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add the compatible string for the UART found on the Tegra234 SoC.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add the compatible string for the SDHCI block found on the Tegra234 SoC.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add the compatible string for the FUSE block found on the Tegra234 SoC.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Convert the NVIDIA Tegra FUSE bindings from the free-form text format to
json-schema.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add the compatible string for the RTC block found on the Tegra234 SoC.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Convert the NVIDIA Tegra RTC bindings from the free-form text format to
json-schema.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add the compatible string for the HSP block found on the Tegra234 SoC.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Convert the NVIDIA Tegra HSP bindings from the free-form text format to
json-schema.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Convert the NVIDIA Tegra SDHCI bindings from the free-form text format
to json-schema.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
With KVM_CAP_S390_USER_SIGP, there are only five Signal Processor
orders (CONDITIONAL EMERGENCY SIGNAL, EMERGENCY SIGNAL, EXTERNAL CALL,
SENSE, and SENSE RUNNING STATUS) which are intended for frequent use
and thus are processed in-kernel. The remainder are sent to userspace
with the KVM_CAP_S390_USER_SIGP capability. Of those, three orders
(RESTART, STOP, and STOP AND STORE STATUS) have the potential to
inject work back into the kernel, and thus are asynchronous.
Let's look for those pending IRQs when processing one of the in-kernel
SIGP orders, and return BUSY (CC2) if one is in process. This is in
agreement with the Principles of Operation, which states that only one
order can be "active" on a CPU at a time.
Cc: stable@vger.kernel.org
Suggested-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20211213210550.856213-2-farman@linux.ibm.com
[borntraeger@linux.ibm.com: add stable tag]
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Changes to the struct are easier to manage with offset comments so
let's add some. And now that we know that the last struct member has
the wrong name let's also fix this.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>