[ Upstream commit e9c7fa025d ]
Depend on SND_HDA_CIRRUS_SCODEC and GPIOLIB instead of selecting them.
KUNIT_ALL_TESTS should only build tests that have satisfied dependencies
and test components that are already being built. It must not cause
other stuff to be added to the build.
Fixes: 2144833e7b ("ALSA: hda: cirrus_scodec: Add KUnit test")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250409114520.914079-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9beb2c91fb ]
Set maximum DMA segment size to 2G instead of UINT_MAX due to HW limit.
Fixes: e0477b34d9 ("RDMA: Explicitly pass in the dma_device to ib_register_device")
Link: https://patch.msgid.link/r/20250327114724.3454268-3-huangjunxian6@hisilicon.com
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a6eb9a4a69 ]
The ovl_get_verity_xattr() function was never added, only its declaration.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Fixes: 184996e92e ("ovl: Validate verity xattr when resolving lowerdata")
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Alexander Larsson <alexl@redhat.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1ddaff40c0 ]
Modifying the crypto_request turns out to be not the right way to handle
the stale value issue with the IV. Though the IV is not used for AES ECB,
it eventually get used in algorithms like LRW in the next step after
AES ECB encryption/decryption. Setting req->iv to NULL breaks the
implementation of such algorithms. Hence modify only the local reqctx
to check for IV.
Fixes: bde5582208 ("crypto: tegra - Set IV to NULL explicitly for AES ECB")
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1cb328da4e ]
Allocate the buffer based on the request instead of a fixed buffer
length. In operations which may require larger buffer size, a fixed
buffer may fail.
Fixes: 0880bb3b00 ("crypto: tegra - Add Tegra Security Engine driver")
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stable-dep-of: 1ddaff40c0 ("crypto: tegra - Fix IV usage for AES ECB")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7b90df7818 ]
Currently there is an unnecessary error check on ret without a proceeding
assignment to ret that needs checking. The check is redundant and can be
removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Akhil R <akhilrajeev@nvidia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stable-dep-of: 1ddaff40c0 ("crypto: tegra - Fix IV usage for AES ECB")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 95f723cf14 ]
devm_kasprintf() returns NULL when memory allocation fails. Currently,
avs_component_probe() does not check for this case, which results in a
NULL pointer dereference.
Fixes: 739c031110 ("ASoC: Intel: avs: Provide support for fallback topology")
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Ethan Carter Edwards <ethan@ethancedwards.com>
Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com>
Link: https://patch.msgid.link/20250402141411.44972-1-bsdhenrymartin@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2b727b3f8a ]
Commit a42e988 ("ASoC: dwc: add DMA handshake control") changed the
behavior of the driver to not enable or disable i2s irqs if using DMA. This
breaks platforms such as AMD ACP. Audio playback appears to work but no
audio can be heard. Revert to the old behavior by always enabling and
disabling i2s irqs while keeping DMA handshake control.
Fixes: a42e988b62 ("ASoC: dwc: add DMA handshake control")
Signed-off-by: Brady Norander <bradynorander@gmail.com>
Link: https://patch.msgid.link/20250330130852.37881-3-bradynorander@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6ec1f02394 ]
The bitmap_get_stats() function incorrectly returns -ENOENT for external
bitmaps.
Remove the external bitmap check as the statistics should be available
regardless of bitmap storage location.
Return -EINVAL only for invalid bitmap with no storage (neither in
superblock nor in external file).
Note: "bitmap_info.external" here refers to a bitmap stored in a separate
file (bitmap_file), not to external metadata.
Fixes: 8d28d0ddb9 ("md/md-bitmap: Synchronize bitmap_get_stats() with bitmap lifetime")
Signed-off-by: Zheng Qixing <zhengqixing@huawei.com>
Link: https://lore.kernel.org/linux-raid/20250403015322.2873369-1-zhengqixing@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a2d5a00722 ]
The smartpqi driver checks the reset_devices variable to determine
whether special adjustments need to be made for kdump. This has the
effect that after a regular kexec reboot, some driver parameters such as
max_transfer_size are much lower than usual. More importantly, kexec
reboot tests have revealed memory corruption caused by the driver log
being written to system memory after a kexec.
Fix this by testing is_kdump_kernel() rather than reset_devices where
appropriate.
Fixes: 058311b72f ("scsi: smartpqi: Add fw log to kdump")
Signed-off-by: Martin Wilck <mwilck@suse.com>
Link: https://lore.kernel.org/r/20250321223319.109250-1-mwilck@suse.com
Cc: Randy Wright <rwright@hpe.com>
Acked-by: Don Brace <don.brace@microchip.com>
Tested-by: Don Brace <don.brace@microchip.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd326a5ad6 ]
Replace all users of blk_mq_pci_map_queues with the more generic
blk_mq_map_hw_queues. This in preparation to retire
blk_mq_pci_map_queues.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Link: https://lore.kernel.org/r/20241202-refactor-blk-affinity-helpers-v6-5-27211e9c2cd5@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: a2d5a00722 ("scsi: smartpqi: Use is_kdump_kernel() to check for kdump")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1452e9b470 ]
blk_mq_pci_map_queues and blk_mq_virtio_map_queues will create a CPU to
hardware queue mapping based on affinity information. These two function
share common code and only differ on how the affinity information is
retrieved. Also, those functions are located in the block subsystem
where it doesn't really fit in. They are virtio and pci subsystem
specific.
Thus introduce provide a generic mapping function which uses the
irq_get_affinity callback from bus_type.
Originally idea from Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Link: https://lore.kernel.org/r/20241202-refactor-blk-affinity-helpers-v6-4-27211e9c2cd5@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: a2d5a00722 ("scsi: smartpqi: Use is_kdump_kernel() to check for kdump")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fea4952df0 ]
Introducing a callback in struct bus_type so that a subsystem
can hook up the getters directly. This approach avoids exposing
random getters in any subsystems APIs.
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Link: https://lore.kernel.org/r/20241202-refactor-blk-affinity-helpers-v6-1-27211e9c2cd5@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: a2d5a00722 ("scsi: smartpqi: Use is_kdump_kernel() to check for kdump")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 72eea84a10 ]
Add goto to ensure scsi_host_put() is called in all error paths of
iscsi_set_host_param() function. This fixes a potential memory leak when
strlen() check fails.
Fixes: ce51c81700 ("scsi: iscsi: Add strlen() check in iscsi_if_set{_host}_param()")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20250318094344.91776-1-linmq006@gmail.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a0f0dc96de ]
The skb dequeued from tx_queue is lost when wl1251_ps_elp_wakeup fails
with a -ETIMEDOUT error. Fix that by queueing the skb back to tx_queue.
Fixes: c5483b7193 ("wl12xx: check if elp wakeup failed")
Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Reviewed-by: Michael Nemanov <michael.nemanov@ti.com>
Link: https://patch.msgid.link/20250330104532.44935-1-abdun.nihaal@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a104042e2b ]
The ieee80211 skb control block key (set when skb was queued) could have
been removed before ieee80211_tx_dequeue() call. ieee80211_tx_dequeue()
already called ieee80211_tx_h_select_key() to get the current key, but
the latter do not update the key in skb control block in case it is
NULL. Because some drivers actually use this key in their TX callbacks
(e.g. ath1{1,2}k_mac_op_tx()) this could lead to the use after free
below:
BUG: KASAN: slab-use-after-free in ath11k_mac_op_tx+0x590/0x61c
Read of size 4 at addr ffffff803083c248 by task kworker/u16:4/1440
CPU: 3 UID: 0 PID: 1440 Comm: kworker/u16:4 Not tainted 6.13.0-ge128f627f404 #2
Hardware name: HW (DT)
Workqueue: bat_events batadv_send_outstanding_bcast_packet
Call trace:
show_stack+0x14/0x1c (C)
dump_stack_lvl+0x58/0x74
print_report+0x164/0x4c0
kasan_report+0xac/0xe8
__asan_report_load4_noabort+0x1c/0x24
ath11k_mac_op_tx+0x590/0x61c
ieee80211_handle_wake_tx_queue+0x12c/0x1c8
ieee80211_queue_skb+0xdcc/0x1b4c
ieee80211_tx+0x1ec/0x2bc
ieee80211_xmit+0x224/0x324
__ieee80211_subif_start_xmit+0x85c/0xcf8
ieee80211_subif_start_xmit+0xc0/0xec4
dev_hard_start_xmit+0xf4/0x28c
__dev_queue_xmit+0x6ac/0x318c
batadv_send_skb_packet+0x38c/0x4b0
batadv_send_outstanding_bcast_packet+0x110/0x328
process_one_work+0x578/0xc10
worker_thread+0x4bc/0xc7c
kthread+0x2f8/0x380
ret_from_fork+0x10/0x20
Allocated by task 1906:
kasan_save_stack+0x28/0x4c
kasan_save_track+0x1c/0x40
kasan_save_alloc_info+0x3c/0x4c
__kasan_kmalloc+0xac/0xb0
__kmalloc_noprof+0x1b4/0x380
ieee80211_key_alloc+0x3c/0xb64
ieee80211_add_key+0x1b4/0x71c
nl80211_new_key+0x2b4/0x5d8
genl_family_rcv_msg_doit+0x198/0x240
<...>
Freed by task 1494:
kasan_save_stack+0x28/0x4c
kasan_save_track+0x1c/0x40
kasan_save_free_info+0x48/0x94
__kasan_slab_free+0x48/0x60
kfree+0xc8/0x31c
kfree_sensitive+0x70/0x80
ieee80211_key_free_common+0x10c/0x174
ieee80211_free_keys+0x188/0x46c
ieee80211_stop_mesh+0x70/0x2cc
ieee80211_leave_mesh+0x1c/0x60
cfg80211_leave_mesh+0xe0/0x280
cfg80211_leave+0x1e0/0x244
<...>
Reset SKB control block key before calling ieee80211_tx_h_select_key()
to avoid that.
Fixes: bb42f2d13f ("mac80211: Move reorder-sensitive TX handlers to after TXQ dequeue")
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Link: https://patch.msgid.link/06aa507b853ca385ceded81c18b0a6dd0f081bc8.1742833382.git.repk@triplefau.lt
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 27c7e63b3c ]
The memory pointed to by priv is freed at the end of at76_delete_device
function (using ieee80211_free_hw). But the code then accesses the udev
field of the freed object to put the USB device. This may also lead to a
memory leak of the usb device. Fix this by using udev from interface.
Fixes: 29e20aa6c6 ("at76c50x-usb: fix use after free on failure path in at76_probe()")
Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Link: https://patch.msgid.link/20250330103110.44080-1-abdun.nihaal@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8aa580cd92 ]
when a SATA disk is directly connected the SAS controller determines the
disk to which I/Os are delivered based on the port ID in the DQ entry.
When many phys are disconnected and reconnect, the port ID of phys were
changed and used by other link, resulting in I/O being sent to incorrect
disk. Data inconsistency on the SATA disk may occur during I/O retries
using the old port ID. So enable force phy, then force the command to be
executed in a certain phy, and if the actual phy ID of the port does not
match the phy configured in the command, the chip will stop delivering the
I/O to disk.
Fixes: ce60689e12 ("scsi: hisi_sas: add v3 code to send ATA frame")
Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Link: https://lore.kernel.org/r/20250312095135.3048379-2-yangxingui@huawei.com
Reviewed-by: Yihang Li <liyihang9@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit e3f88665a7 upstream.
In the ssi_protocol_probe() function, &ssi->work is bound with
ssip_xmit_work(), In ssip_pn_setup(), the ssip_pn_xmit() function
within the ssip_pn_ops structure is capable of starting the
work.
If we remove the module which will call ssi_protocol_remove()
to make a cleanup, it will free ssi through kfree(ssi),
while the work mentioned above will be used. The sequence
of operations that may lead to a UAF bug is as follows:
CPU0 CPU1
| ssip_xmit_work
ssi_protocol_remove |
kfree(ssi); |
| struct hsi_client *cl = ssi->cl;
| // use ssi
Fix it by ensuring that the work is canceled before proceeding
with the cleanup in ssi_protocol_remove().
Signed-off-by: Kaixin Wang <kxwang23@m.fudan.edu.cn>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240918120749.1730-1-kxwang23@m.fudan.edu.cn
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aa1ac98268 upstream.
In PMU event initialization functions
- cpumsf_pmu_event_init()
- cpumf_pmu_event_init()
- cfdiag_event_init()
the partially created event had to be removed when an error was detected.
The event::event_init() member function had to release all resources
it allocated in case of error. event::destroy() had to be called
on freeing an event after it was successfully created and
event::event_init() returned success.
With
commit c70ca29803 ("perf/core: Simplify the perf_event_alloc() error path")
this is not necessary anymore. The performance subsystem common
code now always calls event::destroy() to clean up the allocated
resources created during event initialization.
Remove the event::destroy() invocation in PMU event initialization
or that function is called twice for each event that runs into an
error condition in event creation.
This is the kernel log entry which shows up without the fix:
------------[ cut here ]------------
refcount_t: underflow; use-after-free.
WARNING: CPU: 0 PID: 43388 at lib/refcount.c:87 refcount_dec_not_one+0x74/0x90
CPU: 0 UID: 0 PID: 43388 Comm: perf Not tainted 6.15.0-20250407.rc1.git0.300.fc41.s390x+git #1 NONE
Hardware name: IBM 3931 A01 704 (LPAR)
Krnl PSW : 0704c00180000000 00000209cb2c1b88 (refcount_dec_not_one+0x78/0x90)
R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3
Krnl GPRS: 0000020900000027 0000020900000023 0000000000000026 0000018900000000
00000004a2200a00 0000000000000000 0000000000000057 ffffffffffffffea
00000002b386c600 00000002b3f5b3e0 00000209cc51f140 00000209cc7fc550
0000000001449d38 ffffffffffffffff 00000209cb2c1b84 00000189d67dfb80
Krnl Code: 00000209cb2c1b78: c02000506727 larl %r2,00000209cbcce9c6
00000209cb2c1b7e: c0e5ffbd4431 brasl %r14,00000209caa6a3e0
#00000209cb2c1b84: af000000 mc 0,0
>00000209cb2c1b88: a7480001 lhi %r4,1
00000209cb2c1b8c: ebeff0a00004 lmg %r14,%r15,160(%r15)
00000209cb2c1b92: ec243fbf0055 risbg %r2,%r4,63,191,0
00000209cb2c1b98: 07fe bcr 15,%r14
00000209cb2c1b9a: 47000700 bc 0,1792
Call Trace:
[<00000209cb2c1b88>] refcount_dec_not_one+0x78/0x90
[<00000209cb2c1dc4>] refcount_dec_and_mutex_lock+0x24/0x90
[<00000209caa3c29e>] hw_perf_event_destroy+0x2e/0x80
[<00000209cacaf8b4>] __free_event+0x74/0x270
[<00000209cacb47c4>] perf_event_alloc.part.0+0x4a4/0x730
[<00000209cacbf3e8>] __do_sys_perf_event_open+0x248/0xc20
[<00000209cacc14a4>] __s390x_sys_perf_event_open+0x44/0x50
[<00000209cb8114de>] __do_syscall+0x12e/0x260
[<00000209cb81ce34>] system_call+0x74/0x98
Last Breaking-Event-Address:
[<00000209caa6a4d2>] __warn_printk+0xf2/0x100
---[ end trace 0000000000000000 ]---
Fixes: c70ca29803 ("perf/core: Simplify the perf_event_alloc() error path")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5df5dafc17 upstream.
Do not set 'HCI_UART_PROTO_READY' before call 'hci_uart_register_dev()'.
Possible race is when someone calls 'hci_tty_uart_close()' after this bit
is set, but 'hci_uart_register_dev()' wasn't done. This leads to access
to uninitialized fields. To fix it let's set this bit after device was
registered (as before patch c411c62cc133) and to fix previous problem let's
add one more bit in addition to 'HCI_UART_PROTO_READY' which allows to
perform power up without original bit set (pls see commit c411c62cc133).
Crash backtrace from syzbot report:
RIP: 0010:skb_queue_empty_lockless include/linux/skbuff.h:1887 [inline]
RIP: 0010:skb_queue_purge_reason+0x6d/0x140 net/core/skbuff.c:3936
Call Trace:
<TASK>
skb_queue_purge include/linux/skbuff.h:3364 [inline]
mrvl_close+0x2f/0x90 drivers/bluetooth/hci_mrvl.c:100
hci_uart_tty_close+0xb6/0x120 drivers/bluetooth/hci_ldisc.c:557
tty_ldisc_close drivers/tty/tty_ldisc.c:455 [inline]
tty_ldisc_kill+0x66/0xc0 drivers/tty/tty_ldisc.c:613
tty_ldisc_release+0xc9/0x120 drivers/tty/tty_ldisc.c:781
tty_release_struct+0x10/0x80 drivers/tty/tty_io.c:1690
tty_release+0x4ef/0x640 drivers/tty/tty_io.c:1861
__fput+0x86/0x2a0 fs/file_table.c:450
task_work_run+0x82/0xb0 kernel/task_work.c:239
resume_user_mode_work include/linux/resume_user_mode.h:50 [inline]
exit_to_user_mode_loop kernel/entry/common.c:114 [inline]
exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline]
__syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline]
syscall_exit_to_user_mode+0xa3/0x1b0 kernel/entry/common.c:218
do_syscall_64+0x9a/0x190 arch/x86/entry/common.c:89
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reported-by: syzbot+683f8cb11b94b1824c77@syzkaller.appspotmail.com
Tested-by: syzbot+683f8cb11b94b1824c77@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-bluetooth/d159c57f-8490-4c26-79da-6ad3612c4a14@salutedevices.com/
Fixes: 366ceff495 ("Bluetooth: hci_uart: fix race during initialization")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8b55f88189 upstream.
With KASAN enabled, clang fails to optimize the inline version of
vdec_vp9_slice_map_counts_eob_coef() properly, leading to kilobytes
of temporary values spilled to the stack:
drivers/media/platform/mediatek/vcodec/decoder/vdec/vdec_vp9_req_lat_if.c:1526:12: error: stack frame size (2160) exceeds limit (2048) in 'vdec_vp9_slice_update_prob' [-Werror,-Wframe-larger-than]
This seems to affect all versions of clang including the latest (clang-20),
but the degree of stack overhead is different per release.
Marking the function as noinline_for_stack is harmless here and avoids
the problem completely.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 84ffc79bfb upstream.
A recent optimization change in LLVM [1] aims to transform certain loop
idioms into calls to strlen() or wcslen(). This change transforms the
first while loop in UniStrcat() into a call to wcslen(), breaking the
build when UniStrcat() gets inlined into alloc_path_with_tree_prefix():
ld.lld: error: undefined symbol: wcslen
>>> referenced by nls_ucs2_utils.h:54 (fs/smb/client/../../nls/nls_ucs2_utils.h:54)
>>> vmlinux.o:(alloc_path_with_tree_prefix)
>>> referenced by nls_ucs2_utils.h:54 (fs/smb/client/../../nls/nls_ucs2_utils.h:54)
>>> vmlinux.o:(alloc_path_with_tree_prefix)
Disable this optimization with '-fno-builtin-wcslen', which prevents the
compiler from assuming that wcslen() is available in the kernel's C
library.
[ More to the point - it's not that we couldn't implement wcslen(), it's
that this isn't an optimization at all in the context of the kernel.
Replacing a simple inlined loop with a function call to the same loop
is just stupid and pointless if you don't have long strings and fancy
libraries with vectorization support etc.
For the regular 'strlen()' cases, we want the compiler to do this in
order to handle the trivial case of constant strings. And we do have
optimized versions of 'strlen()' on some architectures. But for
wcslen? Just no. - Linus ]
Cc: stable@vger.kernel.org
Link: 9694844d7e [1]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[nathan: Resolve small conflict in older trees]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7f4ec77f3f upstream.
Initialize 'new_off' and 'pad_bits' to 0 and 'pad_type' to NULL in
btf_dump_emit_bit_padding to prevent compiler warnings/errors which are
observed when compiling with 'EXTRA_CFLAGS=-g -Og' options, but do not
happen when compiling with current default options.
For example, when compiling libbpf with
$ make "EXTRA_CFLAGS=-g -Og" -C tools/lib/bpf/ clean all
Clang version 17.0.6 and GCC 13.3.1 fail to compile btf_dump.c due to
following errors:
btf_dump.c: In function ‘btf_dump_emit_bit_padding’:
btf_dump.c:903:42: error: ‘new_off’ may be used uninitialized [-Werror=maybe-uninitialized]
903 | if (new_off > cur_off && new_off <= next_off) {
| ~~~~~~~~^~~~~~~~~~~
btf_dump.c:870:13: note: ‘new_off’ was declared here
870 | int new_off, pad_bits, bits, i;
| ^~~~~~~
btf_dump.c:917:25: error: ‘pad_type’ may be used uninitialized [-Werror=maybe-uninitialized]
917 | btf_dump_printf(d, "\n%s%s: %d;", pfx(lvl), pad_type,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
918 | in_bitfield ? new_off - cur_off : 0);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
btf_dump.c:871:21: note: ‘pad_type’ was declared here
871 | const char *pad_type;
| ^~~~~~~~
btf_dump.c:930:20: error: ‘pad_bits’ may be used uninitialized [-Werror=maybe-uninitialized]
930 | if (bits == pad_bits) {
| ^
btf_dump.c:870:22: note: ‘pad_bits’ was declared here
870 | int new_off, pad_bits, bits, i;
| ^~~~~~~~
cc1: all warnings being treated as errors
Signed-off-by: Eder Zulian <ezulian@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20241022172329.3871958-3-ezulian@redhat.com
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Xiangyu Chen <xiangyu.chen@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f2f29da9f0 upstream.
While debugging kexec/hibernation hangs and crashes, it turned out that
the current implementation of e820__register_nosave_regions() suffers from
multiple serious issues:
- The end of last region is tracked by PFN, causing it to find holes
that aren't there if two consecutive subpage regions are present
- The nosave PFN ranges derived from holes are rounded out (instead of
rounded in) which makes it inconsistent with how explicitly reserved
regions are handled
Fix this by:
- Treating reserved regions as if they were holes, to ensure consistent
handling (rounding out nosave PFN ranges is more correct as the
kernel does not use partial pages)
- Tracking the end of the last RAM region by address instead of pages
to detect holes more precisely
These bugs appear to have been introduced about ~18 years ago with the very
first version of e820_mark_nosave_regions(), and its flawed assumptions were
carried forward uninterrupted through various waves of rewrites and renames.
[ mingo: Added Git archeology details, for kicks and giggles. ]
Fixes: e8eff5ac29 ("[PATCH] Make swsusp avoid memory holes and reserved memory regions on x86_64")
Reported-by: Roberto Ricci <io@r-ricci.it>
Tested-by: Roberto Ricci <io@r-ricci.it>
Signed-off-by: Myrrh Periwinkle <myrrhperiwinkle@qtmlabs.xyz>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Len Brown <len.brown@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250406-fix-e820-nosave-v3-1-f3787bc1ee1d@qtmlabs.xyz
Closes: https://lore.kernel.org/all/Z4WFjBVHpndct7br@desktop0a/
Signed-off-by: Myrrh Periwinkle <myrrhperiwinkle@qtmlabs.xyz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 930b64ca0c upstream.
Currently, nfsd_proc_stat_init() ignores the return value of
svc_proc_register(). If the procfile creation fails, then the kernel
will WARN when it tries to remove the entry later.
Fix nfsd_proc_stat_init() to return the same type of pointer as
svc_proc_register(), and fix up nfsd_net_init() to check that and fail
the nfsd_net construction if it occurs.
svc_proc_register() can fail if the dentry can't be allocated, or if an
identical dentry already exists. The second case is pretty unlikely in
the nfsd_net construction codepath, so if this happens, return -ENOMEM.
Reported-by: syzbot+e34ad04f27991521104c@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-nfs/67a47501.050a0220.19061f.05f9.GAE@google.com/
Cc: stable@vger.kernel.org # v6.9
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4990d09843 upstream.
Jeff says:
Now that I look, 1b3e26a5cc is wrong. The patch on the ml was correct, but
the one that got committed is different. It should be:
status = decode_cb_op_status(xdr, OP_CB_GETATTR, &cb->cb_status);
if (unlikely(status || cb->cb_status))
If "status" is non-zero, decoding failed (usu. BADXDR), but we also want to
bail out and not decode the rest of the call if the decoded cb_status is
non-zero. That's not happening here, cb_seq_status has already been checked and
is non-zero, so this ends up trying to decode the rest of the CB_GETATTR reply
when it doesn't exist.
Reported-by: Jeff Layton <jlayton@kernel.org>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219737
Fixes: 1b3e26a5cc ("NFSD: fix decoding in nfs4_xdr_dec_cb_getattr")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1b3e26a5cc upstream.
If a client were to send an error to a CB_GETATTR call, the code
erronously continues to try decode past the error code. It ends
up returning BAD_XDR error to the rpc layer and then in turn
trigger a WARN_ONCE in nfsd4_cb_done() function.
Fixes: 6487a13b5c ("NFSD: add support for CB_GETATTR callback")
Signed-off-by: Olga Kornievskaia <okorniev@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dd4f730b55 upstream.
When an attribute group is created with sysfs_create_group(), the
->sysfs_ops() callback is set to kobj_sysfs_ops, which sets the ->show()
and ->store() callbacks to kobj_attr_show() and kobj_attr_store()
respectively. These functions use container_of() to get the respective
callback from the passed attribute, meaning that these callbacks need to
be of the same type as the callbacks in 'struct kobj_attribute'.
However, ->show() and ->store() in the platform_profile driver are
defined for struct device_attribute with the help of DEVICE_ATTR_RO()
and DEVICE_ATTR_RW(), which results in a CFI violation when accessing
platform_profile or platform_profile_choices under /sys/firmware/acpi
because the types do not match:
CFI failure at kobj_attr_show+0x19/0x30 (target: platform_profile_choices_show+0x0/0x140; expected type: 0x7a69590c)
There is no functional issue from the type mismatch because the layout
of 'struct kobj_attribute' and 'struct device_attribute' are the same,
so the container_of() cast does not break anything aside from CFI.
Change the type of platform_profile_choices_show() and
platform_profile_{show,store}() to match the callbacks in
'struct kobj_attribute' and update the attribute variables to
match, which resolves the CFI violation.
Cc: All applicable <stable@vger.kernel.org>
Fixes: a2ff95e018 ("ACPI: platform: Add platform profile support")
Reported-by: John Rowley <lkml@johnrowley.me>
Closes: https://github.com/ClangBuiltLinux/linux/issues/2047
Tested-by: John Rowley <lkml@johnrowley.me>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://patch.msgid.link/20250210-acpi-platform_profile-fix-cfi-violation-v3-1-ed9e9901c33a@kernel.org
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
[nathan: Fix conflicts in older stable branches]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 22cc5ca5de upstream.
CONFIG_PARAVIRT_XXL is mainly defined/used by XEN PV guests. For
other VM guest types, features supported under CONFIG_PARAVIRT
are self sufficient. CONFIG_PARAVIRT mainly provides support for
TLB flush operations and time related operations.
For TDX guest as well, paravirt calls under CONFIG_PARVIRT meets
most of its requirement except the need of HLT and SAFE_HLT
paravirt calls, which is currently defined under
CONFIG_PARAVIRT_XXL.
Since enabling CONFIG_PARAVIRT_XXL is too bloated for TDX guest
like platforms, move HLT and SAFE_HLT paravirt calls under
CONFIG_PARAVIRT.
Moving HLT and SAFE_HLT paravirt calls are not fatal and should not
break any functionality for current users of CONFIG_PARAVIRT.
Fixes: bfe6ed0c67 ("x86/tdx: Add HLT support for TDX guests")
Co-developed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Vishal Annapurve <vannapurve@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Tested-by: Ryan Afranji <afranji@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20250228014416.3925664-2-vannapurve@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 55c85fa757 upstream.
The current implementation of iommufd_device_do_replace() implicitly
assumes that the input device has already been attached. However, there
is no explicit check to verify this assumption. If another device within
the same group has been attached, the replace operation might succeed,
but the input device itself may not have been attached yet.
As a result, the input device might not be tracked in the
igroup->device_list, and its reserved IOVA might not be added. Despite
this, the caller might incorrectly assume that the device has been
successfully replaced, which could lead to unexpected behavior or errors.
To address this issue, add a check to ensure that the input device has
been attached before proceeding with the replace operation. This check
will help maintain the integrity of the device tracking system and prevent
potential issues arising from incorrect assumptions about the device's
attachment status.
Fixes: e88d4ec154 ("iommufd: Add iommufd_device_replace()")
Link: https://patch.msgid.link/r/20250306034842.5950-1-yi.l.liu@intel.com
Cc: stable@vger.kernel.org
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fb21b1568a upstream.
"attach_handle" was added exclusively for the iommufd_fault_iopf_handler()
used by IOPF/PRI use cases. Now, both the MSI and PASID series require to
reuse the attach_handle for non-fault cases.
Add a set of new attach/detach/replace helpers that does the attach_handle
allocation/releasing/replacement in the common path and also handles those
fault specific routines such as iopf enabling/disabling and auto response.
This covers both non-fault and fault cases in a clean way, replacing those
inline helpers in the header. The following patch will clean up those old
helpers in the fault.c file.
Link: https://patch.msgid.link/r/32687df01c02291d89986a9fca897bbbe2b10987.1738645017.git.nicolinc@nvidia.com
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a5951389e5 upstream.
When comparing to the ARM list [1], it appears that several ARM cores
were missing from the lists in spectre_bhb_loop_affected(). Add them.
NOTE: for some of these cores it may not matter since other ways of
clearing the BHB may be used (like the CLRBHB instruction or ECBHB),
but it still seems good to have all the info from ARM's whitepaper
included.
[1] https://developer.arm.com/Arm%20Security%20Center/Spectre-BHB
Fixes: 558c303c97 ("arm64: Mitigate spectre style branch history side channels")
Cc: stable@vger.kernel.org
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20250107120555.v4.5.I4a9a527e03f663040721c5401c41de587d015c82@changeid
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c612cbcdf6 upstream.
The Stage 3 thermal threshold is currently configured during
the controller initialization to 105 Celsius. From the kernel
perspective, this configuration is harmful because:
* The stage 3 interrupt that gets triggered when the threshold is
crossed is not handled in any way by the IRQ handler, it just gets
cleared. Besides, the temperature used for stage 3 comes from the
sensors, and the critical thermal trip points described in the
Devicetree will already cause a shutdown when crossed (at a lower
temperature, of 100 Celsius, for all SoCs currently using this
driver).
* The only effect of crossing the stage 3 threshold that has been
observed is that it causes the machine to no longer be able to enter
suspend. Even if that was a result of a momentary glitch in the
temperature reading of a sensor (as has been observed on the
MT8192-based Chromebooks).
For those reasons, disable the Stage 3 thermal threshold configuration.
Cc: stable@vger.kernel.org
Reported-by: Hsin-Te Yuan <yuanhsinte@chromium.org>
Closes: https://lore.kernel.org/all/20241108-lvts-v1-1-eee339c6ca20@chromium.org/
Fixes: f5f633b182 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20250113-mt8192-lvts-filtered-suspend-fix-v2-2-07a25200c7c6@collabora.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 65594b3745 upstream.
When configured in filtered mode, the LVTS thermal controller will
monitor the temperature from the sensors and trigger an interrupt once a
thermal threshold is crossed.
Currently this is true even during suspend and resume. The problem with
that is that when enabling the internal clock of the LVTS controller in
lvts_ctrl_set_enable() during resume, the temperature reading can glitch
and appear much higher than the real one, resulting in a spurious
interrupt getting generated.
Disable the temperature monitoring and give some time for the signals to
stabilize during suspend in order to prevent such spurious interrupts.
Cc: stable@vger.kernel.org
Reported-by: Hsin-Te Yuan <yuanhsinte@chromium.org>
Closes: https://lore.kernel.org/all/20241108-lvts-v1-1-eee339c6ca20@chromium.org/
Fixes: 8137bb9060 ("thermal/drivers/mediatek/lvts_thermal: Add suspend and resume")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20250113-mt8192-lvts-filtered-suspend-fix-v2-1-07a25200c7c6@collabora.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7335d4ac81 upstream.
Fix a bug where the code was checking the wrong file descriptors
when opening the input files. The code was checking 'fd' instead
of 'fd_in', which could lead to incorrect error handling.
Fixes: 05be5e273c ("selftests: mptcp: add disconnect tests")
Cc: stable@vger.kernel.org
Fixes: ca7ae89160 ("selftests: mptcp: mptfo Initiator/Listener")
Co-developed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Cong Liu <liucong2@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250328-net-mptcp-misc-fixes-6-15-v1-2-34161a482a7f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c183165f87 upstream.
The file descriptor 'fd_in' is opened when cfg_input is configured, but
not closed in main_loop(), this patch fixes it.
Fixes: 05be5e273c ("selftests: mptcp: add disconnect tests")
Cc: stable@vger.kernel.org
Co-developed-by: Cong Liu <liucong2@kylinos.cn>
Signed-off-by: Cong Liu <liucong2@kylinos.cn>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250328-net-mptcp-misc-fixes-6-15-v1-3-34161a482a7f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a8897ed852 upstream.
create_dsq and therefore the scx_bpf_create_dsq kfunc currently silently
ignore duplicate entries. As a sched_ext scheduler is creating each DSQ
for a different purpose this is surprising behaviour.
Replace rhashtable_insert_fast which ignores duplicates with
rhashtable_lookup_insert_fast that reports duplicates (though doesn't
return their value). The rest of the code is structured correctly and
this now returns -EEXIST.
Tested by adding an extra scx_bpf_create_dsq to scx_simple. Previously
this was ignored, now init fails with a -17 code. Also ran scx_lavd
which continued to work well.
Signed-off-by: Jake Hillion <jake@hillion.co.uk>
Acked-by: Andrea Righi <arighi@nvidia.com>
Fixes: f0e1a0643a ("sched_ext: Implement BPF extensible scheduler class")
Cc: stable@vger.kernel.org # v6.12+
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 991a20173a upstream.
The kernel build may fail if the linker does not support -no-pie option,
as it always included in LDFLAGS_vmlinux.
Error log:
s390-linux-ld: unable to disambiguate: -no-pie (did you mean --no-pie ?)
Although the GNU linker defaults to -no-pie, the ability to explicitly
specify this option was introduced in binutils 2.36.
Hence, fix it by adding -no-pie to LDFLAGS_vmlinux only when it is
available.
Cc: stable@vger.kernel.org
Fixes: 00cda11d3b ("s390: Compile kernel with -fPIC and link with -no-pie")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202503220342.T3fElO9L-lkp@intel.com/
Suggested-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2ccd42b959 upstream.
If we finds a vq without a name in our input array in
virtio_ccw_find_vqs(), we treat it as "non-existing" and set the vq pointer
to NULL; we will not call virtio_ccw_setup_vq() to allocate/setup a vq.
Consequently, we create only a queue if it actually exists (name != NULL)
and assign an incremental queue index to each such existing queue.
However, in virtio_ccw_register_adapter_ind()->get_airq_indicator() we
will not ignore these "non-existing queues", but instead assign an airq
indicator to them.
Besides never releasing them in virtio_ccw_drop_indicators() (because
there is no virtqueue), the bigger issue seems to be that there will be a
disagreement between the device and the Linux guest about the airq
indicator to be used for notifying a queue, because the indicator bit
for adapter I/O interrupt is derived from the queue index.
The virtio spec states under "Setting Up Two-Stage Queue Indicators":
... indicator contains the guest address of an area wherein the
indicators for the devices are contained, starting at bit_nr, one
bit per virtqueue of the device.
And further in "Notification via Adapter I/O Interrupts":
For notifying the driver of virtqueue buffers, the device sets the
bit in the guest-provided indicator area at the corresponding
offset.
For example, QEMU uses in virtio_ccw_notify() the queue index (passed as
"vector") to select the relevant indicator bit. If a queue does not exist,
it does not have a corresponding indicator bit assigned, because it
effectively doesn't have a queue index.
Using a virtio-balloon-ccw device under QEMU with free-page-hinting
disabled ("free-page-hint=off") but free-page-reporting enabled
("free-page-reporting=on") will result in free page reporting
not working as expected: in the virtio_balloon driver, we'll be stuck
forever in virtballoon_free_page_report()->wait_event(), because the
waitqueue will not be woken up as the notification from the device is
lost: it would use the wrong indicator bit.
Free page reporting stops working and we get splats (when configured to
detect hung wqs) like:
INFO: task kworker/1:3:463 blocked for more than 61 seconds.
Not tainted 6.14.0 #4
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/1:3 [...]
Workqueue: events page_reporting_process
Call Trace:
[<000002f404e6dfb2>] __schedule+0x402/0x1640
[<000002f404e6f22e>] schedule+0x3e/0xe0
[<000002f3846a88fa>] virtballoon_free_page_report+0xaa/0x110 [virtio_balloon]
[<000002f40435c8a4>] page_reporting_process+0x2e4/0x740
[<000002f403fd3ee2>] process_one_work+0x1c2/0x400
[<000002f403fd4b96>] worker_thread+0x296/0x420
[<000002f403fe10b4>] kthread+0x124/0x290
[<000002f403f4e0dc>] __ret_from_fork+0x3c/0x60
[<000002f404e77272>] ret_from_fork+0xa/0x38
There was recently a discussion [1] whether the "holes" should be
treated differently again, effectively assigning also non-existing
queues a queue index: that should also fix the issue, but requires other
workarounds to not break existing setups.
Let's fix it without affecting existing setups for now by properly ignoring
the non-existing queues, so the indicator bits will match the queue
indexes.
[1] https://lore.kernel.org/all/cover.1720611677.git.mst@redhat.com/
Fixes: a229989d97 ("virtio: don't allocate vqs when names[i] = NULL")
Reported-by: Chandra Merla <cmerla@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Link: https://lore.kernel.org/r/20250402203621.940090-1-david@redhat.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8691abd3af upstream.
For non-VFs, zpci_bus_is_isolated_vf() should return false because they
aren't VFs. While zpci_iov_find_parent_pf() specifically checks if
a function is a VF, it then simply returns that there is no parent. The
simplistic check for a parent then leads to these functions being
confused with isolated VFs and isolating them on their own domain even
if sibling PFs should share the domain.
Fix this by explicitly checking if a function is not a VF. Note also
that at this point the case where RIDs are ignored is already handled
and in this case all PCI functions get isolated by being detected in
zpci_bus_is_multifunction_root().
Cc: stable@vger.kernel.org
Fixes: 2844ddbd54 ("s390/pci: Fix handling of isolated VFs")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e4d4b8670c upstream.
Some architectures do not have data cache coherency between user and
kernel space. For these architectures, the cache needs to be flushed on
both the kernel and user addresses so that user space can see the updates
the kernel has made.
Instead of using flush_dcache_folio() and playing with virt_to_folio()
within the call to that function, use flush_kernel_vmap_range() which
takes the virtual address and does the work for those architectures that
need it.
This also fixes a bug where the flush of the reader page only flushed one
page. If the sub-buffer order is 1 or more, where the sub-buffer size
would be greater than a page, it would miss the rest of the sub-buffer
content, as the "reader page" is not just a page, but the size of a
sub-buffer.
Link: https://lore.kernel.org/all/CAG48ez3w0my4Rwttbc5tEbNsme6tc0mrSN95thjXUFaJ3aQ6SA@mail.gmail.com/
Cc: stable@vger.kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Vincent Donnefort <vdonnefort@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mike Rapoport <rppt@kernel.org>
Link: https://lore.kernel.org/20250402144953.920792197@goodmis.org
Fixes: 117c39200d ("ring-buffer: Introducing ring-buffer mapping functions");
Suggested-by: Jann Horn <jannh@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 701d0e9109 upstream.
On gs101 SoC the fltcon0 (filter configuration 0) offset isn't at a
fixed offset like previous SoCs as the fltcon1 register only exists when
there are more than 4 pins in the bank.
Add a eint_fltcon_offset and new GS101_PIN_BANK_EINT* macros that take
an additional fltcon_offs variable.
This can then be used in suspend/resume callbacks to save and restore
the fltcon0 and fltcon1 registers.
Fixes: 4a8be01a1a ("pinctrl: samsung: Add gs101 SoC pinctrl configuration")
Cc: stable@vger.kernel.org
Reviewed-by: André Draszik <andre.draszik@linaro.org>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250307-pinctrl-fltcon-suspend-v4-1-2d775e486036@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e225128c3f upstream.
When submitting the TLMM test driver, Bjorn reported that some of the test
cases are failing for GPIOs that not are backed by PDC (i.e. "non-wakeup"
GPIOs that are handled directly in pinctrl-msm). Basically, lingering
latched interrupt state is still being delivered at IRQ request time, e.g.:
ok 1 tlmm_test_silent_rising
tlmm_test_silent_falling: ASSERTION FAILED at drivers/pinctrl/qcom/tlmm-test.c:178
Expected atomic_read(&priv->intr_count) == 0, but
atomic_read(&priv->intr_count) == 1 (0x1)
not ok 2 tlmm_test_silent_falling
tlmm_test_silent_low: ASSERTION FAILED at drivers/pinctrl/qcom/tlmm-test.c:178
Expected atomic_read(&priv->intr_count) == 0, but
atomic_read(&priv->intr_count) == 1 (0x1)
not ok 3 tlmm_test_silent_low
ok 4 tlmm_test_silent_high
Whether to report interrupts that came in while the IRQ was unclaimed
doesn't seem to be well-defined in the Linux IRQ API. However, looking
closer at these specific cases, we're actually reporting events that do not
match the interrupt type requested by the driver:
1. After "ok 1 tlmm_test_silent_rising", the GPIO is in low state and
configured for IRQF_TRIGGER_RISING.
2. (a) In preparation for "tlmm_test_silent_falling", the GPIO is switched
to high state. The rising interrupt gets latched.
(b) The GPIO is re-configured for IRQF_TRIGGER_FALLING, but the latched
interrupt isn't cleared.
(c) The IRQ handler is called for the latched interrupt, but there
wasn't any falling edge.
3. (a) For "tlmm_test_silent_low", the GPIO remains in high state.
(b) The GPIO is re-configured for IRQF_TRIGGER_LOW. This seems to
result in a phantom interrupt that gets latched.
(c) The IRQ handler is called for the latched interrupt, but the GPIO
isn't in low state.
4. (a) For "tlmm_test_silent_high", the GPIO is switched to low state.
(b) This doesn't result in a latched interrupt, because RAW_STATUS_EN
was cleared when masking the level-triggered interrupt.
Fix this by clearing the interrupt state whenever making any changes to the
interrupt configuration. This includes previously disabled interrupts, but
also any changes to interrupt polarity or detection type.
With this change, all 16 test cases are now passing for the non-wakeup
GPIOs in the TLMM.
Cc: stable@vger.kernel.org
Fixes: cf9d052aa6 ("pinctrl: qcom: Don't clear pending interrupts when enabling")
Reported-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Closes: https://lore.kernel.org/r/20250227-tlmm-test-v1-1-d18877b4a5db@oss.qualcomm.com/
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Tested-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/20250312-pinctrl-msm-type-latch-v1-1-ce87c561d3d7@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aecb63e88c upstream.
Ensure the PHY reset and perst is asserted during power-off to
guarantee it is in a reset state upon repeated power-on calls. This
resolves an issue where the PHY may not properly initialize during
subsequent power-on cycles. Power-on will deassert the reset at the
appropriate time after tuning the PHY parameters.
During suspend/resume cycles, we observed that the PHY PLL failed to
lock during resume when the CPU temperature increased from 65C to 75C.
The observed errors were:
phy phy-32f00000.pcie-phy.3: phy poweron failed --> -110
imx6q-pcie 33800000.pcie: waiting for PHY ready timeout!
imx6q-pcie 33800000.pcie: PM: dpm_run_callback(): genpd_resume_noirq+0x0/0x80 returns -110
imx6q-pcie 33800000.pcie: PM: failed to resume noirq: error -110
This resulted in a complete CPU freeze, which is resolved by ensuring
the PHY is in reset during power-on, thus preventing PHY PLL failures.
Cc: stable@vger.kernel.org
Fixes: 1aa97b0022 ("phy: freescale: pcie: Initialize the imx8 pcie standalone phy driver")
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250305144355.20364-3-eichest@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f09d3937d4 upstream.
The array for the iomapping cookie addresses has a length of
PCI_STD_NUM_BARS. This constant, however, only describes standard BARs;
while PCI can allow for additional, special BARs.
The total number of PCI resources is described by constant
PCI_NUM_RESOURCES, which is also used in, e.g., pci_select_bars().
Thus, the devres array has so far been too small.
Change the length of the devres array to PCI_NUM_RESOURCES.
Link: https://lore.kernel.org/r/20250312080634.13731-3-phasta@kernel.org
Fixes: bbaff68bf4 ("PCI: Add managed partial-BAR request and map infrastructure")
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Cc: stable@vger.kernel.org # v6.11+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
