Drop the open-coded register polling routines.
Use readl_poll_timeout_atomic() in atomic state.
Also adjust the delay time to 10us which seems more reasonable.
Tested on NXP i.MX8MP and ROCKCHIP RK3588 boards,
the break condition was met right after the first polling,
no delay involved at all.
So the 10us delay should be long enough for most cases.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Furong Xu <0x1207@gmail.com>
Link: https://patch.msgid.link/20250927081036.10611-1-0x1207@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matthieu Baerts says:
====================
mptcp: receive path improvement
This series includes several changes to the MPTCP RX path. The main
goals are improving the RX performances, and increase the long term
maintainability.
Some changes reflects recent(ish) improvements introduced in the TCP
stack: patch 1, 2 and 3 are the MPTCP counter part of SKB deferral free
and auto-tuning improvements. Note that patch 3 could possibly fix
additional issues, and overall such patch should protect from similar
issues to arise in the future.
Patches 4-7 are aimed at introducing the socket backlog usage which will
be done in a later series to process the packets received by the
different subflows while the msk socket is owned.
Patch 8 is not related to the RX path, but it contains additional tests
for new features recently introduced in net-next.
====================
Link: https://patch.msgid.link/20250927-net-next-mptcp-rcv-path-imp-v1-0-5da266aa9c1a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Here are a few sub-tests for mptcp_join.sh, validating the new 'laminar'
endpoint type.
In a setup where subflows created using the routing rules would be
rejected by the listener, and where the latter announces one IP address,
some cases are verified:
- Without any 'laminar' endpoints: no new subflows are created.
- With one 'laminar' endpoint: a second subflow is created.
- With multiple 'laminar' endpoints: 2 IPv4 subflows are created.
- With one 'laminar' endpoint, but the server announcing a second IP
address, only one subflow is created.
- With one 'laminar' + 'subflow' endpoint, the same endpoint is only
used once.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250927-net-next-mptcp-rcv-path-imp-v1-8-5da266aa9c1a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Such function is called only by __mptcp_data_ready(), which in turn
is always invoked when msk is not owned by the user: we can drop the
redundant, related check.
Additionally mptcp needs to propagate the socket error only for
current subflow.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Tested-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250927-net-next-mptcp-rcv-path-imp-v1-7-5da266aa9c1a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The upcoming patch will introduced backlog processing for MPTCP
socket, and we want to leverage coalescing in such data path.
Factor out the relevant bits not touching memory accounting to
deal with such use-case.
Co-developed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250927-net-next-mptcp-rcv-path-imp-v1-6-5da266aa9c1a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit b7535cfed2 ("mptcp: drop legacy code around RX EOF"),
sk_shutdown can't change during the main recvmsg loop, we can drop
the related race breaker.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Tested-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250927-net-next-mptcp-rcv-path-imp-v1-5-5da266aa9c1a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Factor out all the skb initialization step in a new helper and
use it. Note that this change moves the MPTCP CB initialization
earlier: we can do such step as soon as the skb leaves the
subflow socket receive queues.
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Tested-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250927-net-next-mptcp-rcv-path-imp-v1-4-5da266aa9c1a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Apply to the MPTCP auto-tuning the same improvements introduced for the
TCP protocol by the merge commit 2da35e4b4d ("Merge branch
'tcp-receive-side-improvements'").
The main difference is that TCP subflow and the main MPTCP socket need
to account separately for OoO: MPTCP does not care for TCP-level OoO
and vice versa, as a consequence do not reflect MPTCP-level rcvbuf
increase due to OoO packets at the subflow level.
This refeactor additionally allow dropping the msk receive buffer update
at receive time, as the latter only intended to cope with subflow receive
buffer increase due to OoO packets.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/487
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/559
Reviewed-by: Geliang Tang <geliang@kernel.org>
Tested-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250927-net-next-mptcp-rcv-path-imp-v1-3-5da266aa9c1a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To leverage the auto-tuning improvements brought by commit 2da35e4b4d
("Merge branch 'tcp-receive-side-improvements'"), the MPTCP stack need
to access the mentioned helper.
Acked-by: Geliang Tang <geliang@kernel.org>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250927-net-next-mptcp-rcv-path-imp-v1-2-5da266aa9c1a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Usage of the skb deferral API is straight-forward; with multiple
subflows actives this allow moving part of the received application
load into multiple CPUs.
Also fix a typo in the related comment.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Tested-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250927-net-next-mptcp-rcv-path-imp-v1-1-5da266aa9c1a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some applications are stuck to the 20th century and still use
small SO_RCVBUF values.
After the blamed commit, we can drop packets especially
when using LRO/hw-gro enabled NIC and small MSS (1500) values.
LRO/hw-gro NIC pack multiple segments into pages, allowing
tp->scaling_ratio to be set to a high value.
Whenever the receive queue gets full, we can receive a small packet
filling RWIN, but with a high skb->truesize, because most NIC use 4K page
plus sk_buff metadata even when receiving less than 1500 bytes of payload.
Even if we refine how tp->scaling_ratio is estimated,
we could have an issue at the start of the flow, because
the first round of packets (IW10) will be sent based on
the initial tp->scaling_ratio (1/2)
Relax tcp_can_ingest() to use skb->len instead of skb->truesize,
allowing the peer to use final RWIN, assuming a 'perfect'
scaling_ratio of 1.
Fixes: 1d2fbaad7c ("tcp: stronger sk_rcvbuf checks")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250927092827.2707901-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
core:
- MAINTAINERS: add a sub-entry for the Qualcomm bluetooth driver
- Avoid a couple dozen -Wflex-array-member-not-at-end warnings
- bcsp: receive data only if registered
- HCI: Fix using LE/ACL buffers for ISO packets
- hci_core: Detect if an ISO link has stalled
- ISO: Don't initiate CIS connections if there are no buffers
- ISO: Use sk_sndtimeo as conn_timeout
drivers:
- btusb: Check for unexpected bytes when defragmenting HCI frames
- btusb: Add new VID/PID 13d3/3627 for MT7925
- btusb: Add new VID/PID 13d3/3633 for MT7922
- btusb: Add USB ID 2001:332a for D-Link AX9U rev. A1
- btintel: Add support for BlazarIW core
- btintel_pcie: Add support for _suspend() / _resume()
- btintel_pcie: Define hdev->wakeup() callback
- btintel_pcie: Add Bluetooth core/platform as comments
- btintel_pcie: Add id of Scorpious, Panther Lake-H484
- btintel_pcie: Refactor Device Coredump
-----BEGIN PGP SIGNATURE-----
iQJNBAABCgA3FiEE7E6oRXp8w05ovYr/9JCA4xAyCykFAmjYBiUZHGx1aXoudm9u
LmRlbnR6QGludGVsLmNvbQAKCRD0kIDjEDILKW1wD/9z6vGnsfEB1uogUCX6dxZw
yysJ41FqsUKESKiWREEDs4cwnPNJRRDNUCjjaex36qXTc8LTUJwxeiTdIPd5qgPC
ZJ0Xp+uo9FnqnEPLJMsUZ1j1tCCSLUSHF9Y570XpvRupPbHiVwrFVYF/R36CnuUV
mZknBSf1NQSHAUbAoMqa3xls3XUGy12NDA9ObBUmYt5530kigYNOmx0OjSqZKvWa
Sd/quLY+oJ41wy7TAMqGGe5rKrDYZdicpGzjdmaRETrFnB8ebevw/1QTLyjdwbMt
CI+sOvwPGpfQUpETCrjgmscz4UDkgP+XAwEV2xn6t0Y9MGbRSZrYO8DQ0Zk5UhKt
e1fi4yHp5xOA/IvBeQonL1Ln6shMkIt5GF+0D125jb4OfxamOqn3qJ2isy3WVJDj
tNRj4Z9OsokQUfcCkJq+9AaFGpnNaIc4/Vu65sqJhnnYAU+gL3epPEziTl0tVAlq
H0urgd/oX6Egip9jsRwQWhblodGwPEAMbAafyhjx4dc3RFkj45bCAK6TY9BaMz2T
lPndUgmCvBalJrVDXrx/M5ozCRnWqUPfIv5d7RGHs/W1KFIxw4wFEEJrdwhqv/ps
RFFDmeQUPtECp97Tbk81Whb5h19V5zWBygcFq96jEbmz9JUlwqmaE8EvUrMCHbDK
yThQP9erV7ULkO44QWEniQ==
=vr6/
-----END PGP SIGNATURE-----
Merge tag 'for-net-next-2025-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
core:
- MAINTAINERS: add a sub-entry for the Qualcomm bluetooth driver
- Avoid a couple dozen -Wflex-array-member-not-at-end warnings
- bcsp: receive data only if registered
- HCI: Fix using LE/ACL buffers for ISO packets
- hci_core: Detect if an ISO link has stalled
- ISO: Don't initiate CIS connections if there are no buffers
- ISO: Use sk_sndtimeo as conn_timeout
drivers:
- btusb: Check for unexpected bytes when defragmenting HCI frames
- btusb: Add new VID/PID 13d3/3627 for MT7925
- btusb: Add new VID/PID 13d3/3633 for MT7922
- btusb: Add USB ID 2001:332a for D-Link AX9U rev. A1
- btintel: Add support for BlazarIW core
- btintel_pcie: Add support for _suspend() / _resume()
- btintel_pcie: Define hdev->wakeup() callback
- btintel_pcie: Add Bluetooth core/platform as comments
- btintel_pcie: Add id of Scorpious, Panther Lake-H484
- btintel_pcie: Refactor Device Coredump
* tag 'for-net-next-2025-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (30 commits)
Bluetooth: Avoid a couple dozen -Wflex-array-member-not-at-end warnings
Bluetooth: hci_sync: Fix using random address for BIG/PA advertisements
Bluetooth: ISO: don't leak skb in ISO_CONT RX
Bluetooth: ISO: free rx_skb if not consumed
Bluetooth: ISO: Fix possible UAF on iso_conn_free
Bluetooth: SCO: Fix UAF on sco_conn_free
Bluetooth: bcsp: receive data only if registered
Bluetooth: btusb: Add new VID/PID 13d3/3633 for MT7922
Bluetooth: btusb: Add new VID/PID 13d3/3627 for MT7925
Bluetooth: remove duplicate h4_recv_buf() in header
Bluetooth: btusb: Check for unexpected bytes when defragmenting HCI frames
Bluetooth: hci_core: Print information of hcon on hci_low_sent
Bluetooth: hci_core: Print number of packets in conn->data_q
Bluetooth: Add function and line information to bt_dbg
Bluetooth: MGMT: Fix not exposing debug UUID on MGMT_OP_READ_EXP_FEATURES_INFO
Bluetooth: hci_core: Detect if an ISO link has stalled
Bluetooth: ISO: Use sk_sndtimeo as conn_timeout
Bluetooth: HCI: Fix using LE/ACL buffers for ISO packets
Bluetooth: ISO: Don't initiate CIS connections if there are no buffers
MAINTAINERS: add a sub-entry for the Qualcomm bluetooth driver
...
====================
Link: https://patch.msgid.link/20250927154616.1032839-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
__ptr_ring_zero_tail currently does the - 1 operation twice:
- during initialization of head
- at each loop iteration
Let's just do it in one place, all we need to do
is adjust the loop condition. this is better:
- a slightly clearer logic with less duplication
- uses prefix -- we don't need to save the old value
- one less - 1 operation - for example, when ring is empty
we now don't do - 1 at all, existing code does it once
Text size shrinks from 15081 to 15050 bytes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/bcd630c7edc628e20d4f8e037341f26c90ab4365.1758976026.git.mst@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jiawen Wu says:
====================
net: wangxun: support to configure RSS
Implement ethtool ops for RSS configuration, and support multiple RSS
for multiple pools.
====================
Link: https://patch.msgid.link/20250926023843.34340-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enable/disable SR-IOV will change the number of rings, thereby changing
the RSS configuration that the user has set.
So reject these attempts if netif_is_rxfh_configured() returns true. And
remind the user to reset the RSS configuration.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20250926023843.34340-5-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add ethtool ops for Rx flow hashing, query and set RSS indirection table
and hash key. Disable UDP RSS by default, and support to configure L4
header fields with TCP/UDP/SCTP for flow hasing.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20250926023843.34340-4-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For global RSS and multiple RSS scheme, the RSS type fields are defined
identically in the registers. So they can be defined as the macros
WX_RSS_FIELD_* to cleanup the codes. And to prepare for the RXFH support
in the next patch, move the rss_field to struct wx.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20250926023843.34340-3-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For those devices which support 64 pools, they also support PF and VF
(i.e. different pools) to configure different RSS key and hash table.
Enable multiple RSS, use up to 64 RSS configurations and each pool has a
specific configuration.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20250926023843.34340-2-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert the get_user() and __put_user() code to the
fast masked_user_access_begin()/unsafe_{get|put}_user()
variant.
This patch increases the performance of an UDP recvfrom()
receiver (netserver) on 120 bytes messages by 7 %
on an AMD EPYC 7B12 64-Core Processor platform.
Presence of audit_sockaddr() makes difficult
to avoid the stac/clac pair in the copy_to_user() call,
this is left for a future patch.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250925230929.3727873-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the count of the frames dropped by Head-Of-Line Blocking due to
Scheduling(HLBS) error to taprio window drop count stats.
Signed-off-by: Rohan G Thomas <rohan.g.thomas@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Reviewed-by: Furong Xu <0x1207@gmail.com>
Link: https://patch.msgid.link/20250925-hlbs_2-v3-2-3b39472776c2@altera.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Drop those frames causing Head-of-Line Blocking due to Scheduling
(HLBS) error to avoid HLBS interrupt flooding and netdev watchdog
timeouts due to blocked packets. Tx queues can be configured to drop
those blocked packets by setting Drop Frames causing Scheduling Error
(DFBS) bit of EST_CONTROL register.
Also, add per queue HLBS drop count.
Signed-off-by: Rohan G Thomas <rohan.g.thomas@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Reviewed-by: Furong Xu <0x1207@gmail.com>
Link: https://patch.msgid.link/20250925-hlbs_2-v3-1-3b39472776c2@altera.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Corrected function and variable name typos in comments and docstrings:
ixgbe_write_ee_hostif_X550 -> ixgbe_write_ee_hostif_data_X550
ixgbe_get_lcd_x550em -> ixgbe_get_lcd_t_x550em
"Determime" -> "Determine"
"point to hardware structure" -> "pointer to hardware structure"
"To turn on the LED" -> "To turn off the LED"
These changes improve readability, consistency.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Acked-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250929124427.79219-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It is suddenly used in the text without introduction, so the meaning
might have been unclear to readers.
Signed-off-by: Markus Heidelberg <m.heidelberg@cab.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250926131520.222346-1-m.heidelberg@cab.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add three counters to vnic health reporter:
bar_uar_access, odp_local_triggered_page_fault, and
odp_remote_triggered_page_fault.
- bar_uar_access
number of WRITE or READ access operations to the UAR on the PCIe
BAR.
- odp_local_triggered_page_fault
number of locally-triggered page-faults due to ODP.
- odp_remote_triggered_page_fault
number of remotly-triggered page-faults due to ODP.
Example access:
$ devlink health diagnose pci/0000:08:00.0 reporter vnic
vNIC env counters:
total_error_queues: 0 send_queue_priority_update_flow: 0
comp_eq_overrun: 0 async_eq_overrun: 0 cq_overrun: 0
invalid_command: 0 quota_exceeded_command: 0
nic_receive_steering_discard: 0 icm_consumption: 1032
bar_uar_access: 1279 odp_local_triggered_page_fault: 20
odp_remote_triggered_page_fault: 34
Signed-off-by: Akiva Goldberger <agoldberger@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1758797130-829564-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Use the __struct_group() helper to fix 31 instances of the following
type of warnings:
30 net/bluetooth/mgmt_config.c:16:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
1 net/bluetooth/mgmt_config.c:22:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When creating an advertisement for BIG the address shall not be
non-resolvable since in case of acting as BASS/Broadcast Assistant the
address must be the same as the connection in order to use the PAST
method and even when PAST/BASS are not in the picture a Periodic
Advertisement can still be synchronized thus the same argument as to
connectable advertisements still stand.
Fixes: eca0ae4aea ("Bluetooth: Add initial implementation of BIS connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
For ISO_CONT RX, the data from skb is copied to conn->rx_skb, but the
skb is leaked.
Free skb after copying its data.
Fixes: ccf74f2390 ("Bluetooth: Add BTPROTO_ISO socket type")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If iso_conn is freed when RX is incomplete, free any leftover skb piece.
Fixes: dc26097bdb ("Bluetooth: ISO: Use kref to track lifetime of iso_conn")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This attempt to fix similar issue to sco_conn_free where if the
conn->sk is not set to NULL may lead to UAF on iso_conn_free.
Fixes: ccf74f2390 ("Bluetooth: Add BTPROTO_ISO socket type")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Currently, bcsp_recv() can be called even when the BCSP protocol has not
been registered. This leads to a NULL pointer dereference, as shown in
the following stack trace:
KASAN: null-ptr-deref in range [0x0000000000000108-0x000000000000010f]
RIP: 0010:bcsp_recv+0x13d/0x1740 drivers/bluetooth/hci_bcsp.c:590
Call Trace:
<TASK>
hci_uart_tty_receive+0x194/0x220 drivers/bluetooth/hci_ldisc.c:627
tiocsti+0x23c/0x2c0 drivers/tty/tty_io.c:2290
tty_ioctl+0x626/0xde0 drivers/tty/tty_io.c:2706
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
To prevent this, ensure that the HCI_UART_REGISTERED flag is set before
processing received data. If the protocol is not registered, return
-EUNATCH.
Reported-by: syzbot+4ed6852d4da4606c93da@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=4ed6852d4da4606c93da
Tested-by: syzbot+4ed6852d4da4606c93da@syzkaller.appspotmail.com
Signed-off-by: Ivan Pravdin <ipravdin.official@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The "h4_recv.h" header contains a duplicate h4_recv_buf() that is nearly
but not quite identical to the h4_recv_buf() in hci_h4.c.
This duplicated header was added in commit 07eb96a5a7 ("Bluetooth:
bpa10x: Use separate h4_recv_buf helper"). I wasn't able to find any
explanation for duplicating the code in the discussion:
https://lore.kernel.org/all/20180320181855.37297-1-marcel@holtmann.org/https://lore.kernel.org/all/20180324091954.73229-2-marcel@holtmann.org/
Unfortunately, in the years since, several other drivers have come to
also rely on this duplicated function, probably by accident. This is, at
the very least, *extremely* confusing. It's also caused real issues when
it's become out-of-sync, see the following:
ef564119ba ("Bluetooth: hci_h4: Add support for ISO packets")
61b27cdf02 ("Bluetooth: hci_h4: Add support for ISO packets in h4_recv.h")
This is the full diff between the two implementations today:
--- orig.c
+++ copy.c
@@ -1,117 +1,100 @@
{
- struct hci_uart *hu = hci_get_drvdata(hdev);
- u8 alignment = hu->alignment ? hu->alignment : 1;
-
/* Check for error from previous call */
if (IS_ERR(skb))
skb = NULL;
while (count) {
int i, len;
- /* remove padding bytes from buffer */
- for (; hu->padding && count > 0; hu->padding--) {
- count--;
- buffer++;
- }
- if (!count)
- break;
-
if (!skb) {
for (i = 0; i < pkts_count; i++) {
if (buffer[0] != (&pkts[i])->type)
continue;
skb = bt_skb_alloc((&pkts[i])->maxlen,
GFP_ATOMIC);
if (!skb)
return ERR_PTR(-ENOMEM);
hci_skb_pkt_type(skb) = (&pkts[i])->type;
hci_skb_expect(skb) = (&pkts[i])->hlen;
break;
}
/* Check for invalid packet type */
if (!skb)
return ERR_PTR(-EILSEQ);
count -= 1;
buffer += 1;
}
len = min_t(uint, hci_skb_expect(skb) - skb->len, count);
skb_put_data(skb, buffer, len);
count -= len;
buffer += len;
/* Check for partial packet */
if (skb->len < hci_skb_expect(skb))
continue;
for (i = 0; i < pkts_count; i++) {
if (hci_skb_pkt_type(skb) == (&pkts[i])->type)
break;
}
if (i >= pkts_count) {
kfree_skb(skb);
return ERR_PTR(-EILSEQ);
}
if (skb->len == (&pkts[i])->hlen) {
u16 dlen;
switch ((&pkts[i])->lsize) {
case 0:
/* No variable data length */
dlen = 0;
break;
case 1:
/* Single octet variable length */
dlen = skb->data[(&pkts[i])->loff];
hci_skb_expect(skb) += dlen;
if (skb_tailroom(skb) < dlen) {
kfree_skb(skb);
return ERR_PTR(-EMSGSIZE);
}
break;
case 2:
/* Double octet variable length */
dlen = get_unaligned_le16(skb->data +
(&pkts[i])->loff);
hci_skb_expect(skb) += dlen;
if (skb_tailroom(skb) < dlen) {
kfree_skb(skb);
return ERR_PTR(-EMSGSIZE);
}
break;
default:
/* Unsupported variable length */
kfree_skb(skb);
return ERR_PTR(-EILSEQ);
}
if (!dlen) {
- hu->padding = (skb->len + 1) % alignment;
- hu->padding = (alignment - hu->padding) % alignment;
-
/* No more data, complete frame */
(&pkts[i])->recv(hdev, skb);
skb = NULL;
}
} else {
- hu->padding = (skb->len + 1) % alignment;
- hu->padding = (alignment - hu->padding) % alignment;
-
/* Complete frame */
(&pkts[i])->recv(hdev, skb);
skb = NULL;
}
}
return skb;
}
-EXPORT_SYMBOL_GPL(h4_recv_buf)
As I read this: If alignment is one, and padding is zero, padding
remains zero throughout the loop. So it seems to me that the two
functions behave strictly identically in that case. All the duplicated
defines are also identical, as is the duplicated h4_recv_pkt structure
declaration.
All four drivers which use the duplicated function use the default
alignment of one, and the default padding of zero. I therefore conclude
the duplicate function may be safely replaced with the core one.
I raised this in an RFC a few months ago, and didn't get much interest:
https://lore.kernel.org/all/CABBYNZ+ONkYtq2fR-8PtL3X-vetvJ0BdP4MTw9cNpjLDzG3HUQ@mail.gmail.com/
...but I'm still wary I've missed something, and I'd really appreciate
more eyeballs on it.
I tested this successfully on btnxpuart a few months ago, but
unfortunately I no longer have access to that hardware.
Cc: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Calvin Owens <calvin@wbinvd.org>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This prints the information about the hcon on hci_low_sent to confirm
all connection are being processed.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This attempts to print the number of packets pending to be transmitted
in the conn->data_q.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When enabling debug via CONFIG_BT_FEATURE_DEBUG include function and
line information by default otherwise it is hard to make any sense of
which function the logs comes from.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The debug UUID was only getting set if MGMT_OP_READ_EXP_FEATURES_INFO
was not called with a specific index which breaks the likes of
bluetoothd since it only invokes MGMT_OP_READ_EXP_FEATURES_INFO when an
adapter is plugged, so instead of depending hdev not to be set just
enable the UUID on any index like it was done with iso_sock_uuid.
Fixes: e625e50cee ("Bluetooth: Introduce debug feature when dynamic debug is disabled")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This attempts to detect if an ISO link has been waiting for an ISO
buffer for longer than the maximum allowed transport latency then
proceed to use hci_link_tx_to which prints an error and disconnects.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This aligns the usage of socket sk_sndtimeo as conn_timeout when
initiating a connection and then use it when scheduling the
resulting HCI command, similar to what has been done in bf98feea5b
("Bluetooth: hci_conn: Always use sk_timeo as conn_timeout").
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
ISO packets shall not use LE/ACL buffer pool, that feature seem to be
exclusive to LE-ACL only.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If the controller has no buffers left return -ENOBUFF to indicate that
iso_cnt might be out of sync.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Patches modifying drivers/bluetooth/hci_qca.c should be Cc'ed to the
linux-arm-msm mailing list so that Qualcomm maintainers and reviewers
can get notified about proposed changes to it. Add a sub-entry that adds
the mailing list to the list of addresses returned by get_maintainer.pl.
Acked-by: Konrad Dybcio <konradybcio@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
As device coredumps are not HCI traces, maintain the device coredump at
the driver level and eliminate the dependency on hdev_devcd*()
Signed-off-by: Kiran K <kiran.k@intel.com>
Fixes: 07e6bddb54 ("Bluetooth: btintel_pcie: Add support for device coredump")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
kzalloc() already zero-initializes the destination buffer 'data', making
strscpy() sufficient for safely copying 'name'. The additional
NUL-padding performed by strscpy_pad() is unnecessary.
Add a new local variable to store the length of 'name' and reuse it
instead of recalculating the same length.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add the __counted_by_le() compiler attribute to the flexible array
member 'supported_commands' to improve access bounds-checking via
CONFIG_UBSAN_BOUNDS and CONFIG_FORTIFY_SOURCE.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
