Adds short description for two new sysfs entries, ctgp_offset and
usb_c_power_priority, to the documentation of uniwill laptops.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://patch.msgid.link/20260324203413.454361-6-wse@tuxedocomputers.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Uses the more fine granular and/or new feature defines to enable more
features across the TUXEDO device lineup.
Also adds features to TUXEDO devices that where already present in the
driver, but not tested until now.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://patch.msgid.link/20260324203413.454361-5-wse@tuxedocomputers.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add alternative XMG Fusion system vendor name and clarify edition in ident.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://patch.msgid.link/20260324203413.454361-4-wse@tuxedocomputers.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
On some devices Uniwill offers the option to set the USB-C port to
prioritise charging or performance. This patch exposes this setting to the
userspace via sysfs for all TUXEDO devices supporting it.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://patch.msgid.link/20260324203413.454361-3-wse@tuxedocomputers.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Split hwmon feature define in smaller parts to accommodate for diverse
hardware. You can now specify the presence of a cpu and/or a gpu temp
sensor separately and if one or 2 fans exists.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Werner Sembach <wse@tuxedocomputers.com>
Tested-by: Werner Sembach <wse@tuxedocomputers.com>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://patch.msgid.link/20260324203413.454361-2-wse@tuxedocomputers.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Fixes and New HW Support
- amd/hsmp: Fix typo in error message
- asus-armoury: Add support for G614FP, GA503QM, GZ302EAC, and GZ302EAC
- asus-nb-wmi: Add DMI quirk for ASUS ROG Flow Z13-KJP GZ302EAC
- hp-wmi: Support for Omen 16-k0xxx, 16-wf1xxx, 16-xf0xxx
- intel-hid: Disable wakeup_mode during hibernation
- ISST:
- Check HWP support before MSR access
- Correct locked bit width
- lenovo: wmi-gamezone: Drop unused gz_chain_head
- olpc-xo175-ec: Fix overflow error message
The following is an automated shortlog grouped by driver:
amd/hsmp:
- Fix typo in error message
asus-armoury:
- add support for G614FP
- add support for GA503QM
- add support for GZ302EA and GZ302EAC
asus-nb-wmi:
- add DMI quirk for ASUS ROG Flow Z13-KJP GZ302EAC
hp-wmi:
- Add Omen 16-xf0xxx (8BCA) support
- Add support for Omen 16-k0xxx (8A4D)
- Add support for Omen 16-wf1xxx (8C76)
intel-hid:
- disable wakeup_mode during hibernation
ISST:
- Check HWP support before MSR access
- Correct locked bit width
lenovo: wmi-gamezone:
- Drop gz_chain_head
MAINTAINERS:
- change email address of Denis Benato
olpc: olpc-xo175-ec:
- Fix overflow error message to print inlen
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCacPa+wAKCRBZrE9hU+XO
Mf/1AP9M2dbDElMJQtS8wrcyML5xgGGInfzXACXaQKhVV6ZYugD8DDDdxdtreT+E
1eb8adT4cyGTW8s2YvJFeAD3FXY+FgU=
=ktTR
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCacvZhgAKCRBZrE9hU+XO
MQNHAP4yxM/7280O22QTWRSLGbaCkpxYiyXuo/7Vp/LUnVAbVQD+K0FCXj2A1pWW
IXjfKpmDExlnzrO1L5g/4v+/d1zr7gI=
=MOOt
-----END PGP SIGNATURE-----
Merge tag 'fixes' into 'for-next'
Allows uniwill-laptop feature work that depends on changes in the fixes
branch proceed.
Fix screenpad brightness range being too limited without reason:
testing this patch on a Zenbook Duo showed the hardware minimum not being
too low, therefore allow the user to configure the entire range, and
expose to userspace the hardware brightness range and value.
Fixes: 2c97d3e55b ("platform/x86: asus-wmi: add support for ASUS screenpad")
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Luke Jones <luke@ljones.dev>
Link: https://patch.msgid.link/20260302174431.349816-3-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Fix illogical screen off control by hardcoding 0 and 1 depending on the
requested brightness and also do not rely on the last screenpad power
state to issue screen brightness commands.
Fixes: 2c97d3e55b ("platform/x86: asus-wmi: add support for ASUS screenpad")
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Luke Jones <luke@ljones.dev>
Link: https://patch.msgid.link/20260302174431.349816-2-denis.benato@linux.dev
Link: https://patch.msgid.link/20260326231154.856729-2-ethantidmore06@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Users are complaining for the battery limit being reset at 100% during
the boot process while the general consensus appears to not apply
unsolicited hardware changes, therefore stop resetting the battery
charge limit at boot and return -ENODATA on charge_end_threshold to
signal for an unknown limit.
Suggested-by: Antheas Kapenekakis <lkml@antheas.dev>
Suggested-by: Derek J. Clark <derekjohn.clark@gmail.com>
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Reviewed-by: Derek J. Clark <derekjohn.clark@gmail.com>
Tested-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://patch.msgid.link/20260304132608.33815-1-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add a new driver for Bitland laptops that utilize the MIFS (MiInterface)
WMI interface.
The driver implements several features through the WMI interface:
- Platform Profile: Supports "Quiet", "Balanced", "Performance", and
"Full Speed" modes. The "Full Speed" mode is intelligently restricted
based on the AC adapter type (requires DC power, not supported on
USB-C charging) as required by the hardware.
- Hwmon: Provides monitoring for CPU, GPU, and System fan speeds,
as well as CPU temperature sensors.
- Keyboard Backlight: Integrated with the LED class device for
brightness control and provides sysfs attributes for keyboard modes
(cyclic, fixed, etc.).
- GPU Mode: Allows switching between Hybrid, Discrete, and UMA
graphics modes via sysfs.
- Hotkeys: Handles WMI events for system hotkeys (Calculator, Browser,
App launch) using sparse keymaps and reports status changes for
Airplane mode, Touchpad, and CapsLock.
- Fan Boost: Provides a sysfs interface to force fans to maximum speed.
The driver registers two WMI GUIDs:
- B60BFB48-3E5B-49E4-A0E9-8CFFE1B3434B: Control methods
- 46C93E13-EE9B-4262-8488-563BCA757FEF: Event notifications
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Mingyou Chen <qby140326@gmail.com>
Link: https://patch.msgid.link/20260323132218.444383-1-qby140326@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
SST-PP locked bit width is set to three bits. It should be only one bit.
Use SST_PP_LOCK_WIDTH define instead of SST_PP_LEVEL_WIDTH.
Fixes: ea009e4769 ("platform/x86: ISST: Add SST-PP support via TPMI")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260323153635.3263828-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add a freeze handler which clears wakeup_mode. This fixes aborted hibernation on
Dell Precision 3880.
Wakeup event detected during hibernation, rolling back
This system sends power button events during hibernation, even when triggered by
software.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218634
Fixes: 0c4cae1bc0 ("PM: hibernate: Avoid missing wakeup events during hibernation")
Signed-off-by: David McFarland <corngood@gmail.com>
Link: https://patch.msgid.link/20260205231629.1336348-1-corngood@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add TDP data for tablet models GZ302EA and GZ302EAC.
Signed-off-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Reviewed-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260313004939.4103835-1-matthew.schwartz@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The ASUS ROG Flow Z13-KJP GZ302EAC model uses sys_vendor name ASUS
rather than ASUSTeK COMPUTER INC., but it needs the same folio quirk as
the other ROG Flow Z13. To keep things simple, just match on sys_vendor
ASUS since it covers both.
Signed-off-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260312212246.1608080-1-matthew.schwartz@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Fix a typo in the HSMP error message where "tmeout" should be "timeout".
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://patch.msgid.link/20260310125307.700108-1-alok.a.tiwari@oracle.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The gz_chain_head variable has been unused since the driver's initial
addition to the tree. Its use was eliminated between v3 and v4 during
development but due to the reference of gz_chain_head's wait_list
member, the compiler could not warn that it was unused.
After a (tip) commit ("locking/rwsem: Remove the list_head from struct
rw_semaphore"), which removed a reference to the variable passed to
__RWSEM_INITIALIZER(), certain configurations show an unused variable
warning from the Lenovo wmi-gamezone driver:
drivers/platform/x86/lenovo/wmi-gamezone.c:34:31: warning: 'gz_chain_head' defined but not used [-Wunused-variable]
34 | static BLOCKING_NOTIFIER_HEAD(gz_chain_head);
| ^~~~~~~~~~~~~
include/linux/notifier.h:119:39: note: in definition of macro 'BLOCKING_NOTIFIER_HEAD'
119 | struct blocking_notifier_head name = \
| ^~~~
Remove the variable to prevent the warning from showing up.
Fixes: 22024ac536 ("platform/x86: Add Lenovo Gamezone WMI Driver")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://patch.msgid.link/20260313-lenovo-wmi-gamezone-remove-gz_chain_head-v1-1-ce5231f0c6fa@kernel.org
[ij: reorganized the changelog]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
On some systems, HWP can be explicitly disabled in the BIOS settings
When HWP is disabled by firmware, the HWP CPUID bit is not set, and
attempting to read MSR_PM_ENABLE will result in a General Protection
(GP) fault.
unchecked MSR access error: RDMSR from 0x770 at rIP: 0xffffffffc33db92e (disable_dynamic_sst_features+0xe/0x50 [isst_tpmi_core])
Call Trace:
<TASK>
? ex_handler_msr+0xf6/0x150
? fixup_exception+0x1ad/0x340
? gp_try_fixup_and_notify+0x1e/0xb0
? exc_general_protection+0xc9/0x390
? terminate_walk+0x64/0x100
? asm_exc_general_protection+0x22/0x30
? disable_dynamic_sst_features+0xe/0x50 [isst_tpmi_core]
isst_if_def_ioctl+0xece/0x1050 [isst_tpmi_core]
? ioctl_has_perm.constprop.42+0xe0/0x130
isst_if_def_ioctl+0x10d/0x1a0 [isst_if_common]
__se_sys_ioctl+0x86/0xc0
do_syscall_64+0x8a/0x100
entry_SYSCALL_64_after_hwframe+0x78/0xe2
RIP: 0033:0x7f36eaef54a7
Add a check for X86_FEATURE_HWP before accessing the MSR. If HWP is
not available, return true safely.
Fixes: 12a7d2cb81 ("platform/x86: ISST: Add SST-CP support via TPMI")
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20260303074635.2218-1-lirongqing@baidu.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The HP Omen 16-k0xxx (board ID: 8A4D) has the same WMI interface as
other Victus S boards, but requires additional quirks for correctly
switching thermal profile.
Create a new quirk omen_v1_legacy_thermal_params which allows a board to
use Omen V1 thermal values, but rely on the older legacy
HP_OMEN_EC_THERMAL_PROFILE_OFFSET. Add the DMI board name to
victus_s_thermal_profile_boards[] table and map it to the newly added
quirk.
Testing on board 8A4D confirmed that platform profile is registered
successfully and fan RPMs are readable and controllable.
Tested-by: Qinfeng Wu <qwqgong@gmail.com>
Reported-by: Qinfeng Wu <qwqgong@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221150
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20260302073525.71037-1-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The HP Omen 16-wf1xxx (board ID: 8C76) has the same WMI interface as
other Victus S boards, but requires quirks for correctly switching
thermal profile (similar to board 8C78).
Add the DMI board name to victus_s_thermal_profile_boards[] table and
map it to omen_v1_thermal_params.
Testing on board 8C76 confirmed that platform profile is registered
successfully and fan RPMs are readable and controllable.
Tested-by: WJ Enderlava <jie7172585@gmail.com>
Reported-by: WJ Enderlava <jie7172585@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221149
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20260227154106.226809-1-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The HP Omen 16-xf0xxx board 8BCA uses the same Victus-S fan and
thermal WMI path as other recently supported Omen/Victus boards,
but it requires Omen v1 thermal profile parameters for correct
platform profile behavior.
Add board 8BCA to victus_s_thermal_profile_boards[] and map it
to omen_v1_thermal_params.
Validated on HP Omen 16-xf0xxx (board 8BCA):
- /sys/firmware/acpi/platform_profile exposes
low-power/balanced/performance
- fan RPM reporting works (fan1_input/fan2_input)
- manual fan control works through hp-wmi hwmon (pwm1/pwm1_enable)
Signed-off-by: Raed <thisisraed@outlook.com>
Link: https://patch.msgid.link/20260311131338.965249-1-youaretalkingtoraed@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add TDP data for laptop model G614FP.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260309183559.433555-3-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add TDP data for laptop model GA503QM.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260309183559.433555-2-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
I have been using a linux.dev email since that is hugely better than gmail.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Denis Benato <benato.denis96@gmail.com>
Link: https://patch.msgid.link/20260304141102.63732-1-denis.benato@linux.dev
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Using guard notation simplifies control flow and makes the code clearer.
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260318-barco-p50-gpio-set-v2-2-c0a4a6416163@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The GPIO get callback is expected to return 0 or 1 (or a negative error
code). Ensure that the value returned by p50_gpio_get() is normalized
to the [0, 1] range.
Fixes: 86ef402d80 ("gpiolib: sanitize the return value of gpio_chip::get()")
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260318-barco-p50-gpio-set-v2-1-c0a4a6416163@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
This driver includes the legacy header <linux/gpio.h> but does
not use any symbols from it. Drop the inclusion.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260320222033.3238317-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The modern GPIO APIs are available for users via linux/gpio/consumer.h.
The linux/gpio.h is legacy header that is subject to remove. Hence
replace the latter by the former in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260320221143.3237791-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the Dell Airplane Mode Switch (rbtn) ACPI
driver to a platform one.
After this change, the subordinate rfkill device will be registered
under the platform device used for driver binding instead of its ACPI
companion.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/6141354.MhkbZ0Pkbq@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
To facilitate subsequent conversion of the driver to a platform one,
make it install an ACPI notify handler directly instead of using
a .notify() callback in struct acpi_driver.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/9591832.CDJkKcVGEf@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the System76 ACPI driver to a platform one.
After this change, the subordinate hwmon, input and LED class devices
will be registered under the platform device used for driver binding
instead of its ACPI companion.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3401648.aeNJFYEL58@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
To facilitate subsequent conversion of the driver to a platform one,
make it install an ACPI notify handler directly instead of using
a .notify() callback in struct acpi_driver.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/13970743.uLZWGnKmhe@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Drop two redundant devm_led_classdev_unregister() calls from
system76_remove().
No intentional functional impact.
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/5057164.GXAFRqVoOG@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the Panasonic laptop ACPI driver to a platform
one.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
To maintain backwards compatibility with possibly existing user space,
the sysfs attributes created by the driver under the ACPI device object
used by it are not relocated. Accordingly, the driver will continue to
use the driver_data pointer in struct acpi_device which needs to be
cleared on driver removal.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/8664183.T7Z3S40VBb@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
To facilitate subsequent conversion of the driver to a platform one,
make it install an ACPI notify handler directly instead of using
a .notify() callback in struct acpi_driver.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/13979037.uLZWGnKmhe@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The device pointer cannot be NULL in acpi_pcc_hotkey_add() and
acpi_pcc_hotkey_remove() because these functions are ACPI driver
callbacks and NULL is never passed to any of them as an argument.
Likewise, acpi_pcc_hotkey_resume() is a resume callback of a
device driver and NULL is never passed to it as an argument, so
the dev pointer in it cannot be NULL.
Moreover, since acpi_pcc_hotkey_remove() and acpi_pcc_hotkey_resume()
can only run after acpi_pcc_hotkey_add() has completed successfully,
the acpi_driver_data() of the device object used by them cannot be
NULL when they run.
Drop all of the redundant NULL checks of the pointers mentioned above.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/1957824.tdWV9SEqCh@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
An ACPI notify handler is leaked if device_create_file() returns an
error in acpi_pcc_hotkey_add().
Also, it is pointless to call pcc_unregister_optd_notifier() in
acpi_pcc_hotkey_remove() if pcc->platform is NULL and it is better
to arrange the cleanup code in that function in the same order as
the rollback code in acpi_pcc_hotkey_add().
Address the above by placing the pcc_register_optd_notifier() call in
acpi_pcc_hotkey_add() after the device_create_file() return value
check and placing the pcc_unregister_optd_notifier() call in
acpi_pcc_hotkey_remove() right before the device_remove_file() call.
Fixes: d5a81d8e86 ("platform/x86: panasonic-laptop: Add support for optical driver power in Y and W series")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2411055.ElGaqSPkdT@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Convert pcc_register_optd_notifier() whose return value is never used to
a void function.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/5093613.31r3eYUQgx@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the main part of the Fujitsu laptop driver
from an ACPI driver to a platform one.
After this change, the subordinate LED and input devices will be
registered under the platform device used for driver binding instead of
its ACPI companion.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Jonathan Woithe <jwoithe@just42.net>
Link: https://patch.msgid.link/10818905.nUPlyArG6x@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the backlight part of the Fujitsu laptop
driver from an ACPI driver to a platform one.
After this change, the backlight and input subordinate devices will be
registered under the platform device used for driver binding instead of
its ACPI companion.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Jonathan Woithe <jwoithe@just42.net>
Link: https://patch.msgid.link/3407755.44csPzL39Z@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
To facilitate subsequent conversion of the driver to using struct
platform_driver instead of struct acpi_driver, make it install its ACPI
notify handlers directly instead of using struct acpi_driver .notify()
callbacks.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Jonathan Woithe <jwoithe@just42.net>
Link: https://patch.msgid.link/3035290.e9J7NaK4W3@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Move the definitions of acpi_fujitsu_bl_notify() and
acpi_fujitsu_laptop_notify() along with some helpers above
the definitions of the functions that will refer to them
after subsequent changes, to avoid having to add forward
declarations of them.
No intentional functional impact.
Acked-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/1950259.tdWV9SEqCh@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the fujitsu-tablet ACPI driver to a platform
one.
After this change, the subordinate input device will be registered under
the platform device used for driver binding instead of its ACPI companion.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Acked-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2403432.ElGaqSPkdT@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the airplane mode button for AMD, HP and
Xiaomi laptops driver from an ACPI driver to a platform one.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/9607409.CDJkKcVGEf@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
To facilitate subsequent conversion of the driver to a platform one,
make it install an ACPI notify handler directly instead of using
a .notify() callback in struct acpi_driver.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3953848.kQq0lBPeGt@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the Topstar Laptop ACPI Extras driver from
an ACPI driver to a platform one.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/10834824.nUPlyArG6x@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
To facilitate subsequent conversion of the driver to a platform one,
make it install an ACPI notify handler directly instead of using
a .notify() callback in struct acpi_driver.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3425557.44csPzL39Z@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the Programmable IO Control (pic) part of
the Sony laptop driver from an ACPI driver to a platform one.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2059875.yKVeVyVuyW@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the Notebook Control (nc) part of the Sony
laptop driver from an ACPI driver to a platform one.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/886676729.0ifERbkFSE@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
To facilitate subsequent conversion of the driver to a platform one,
make it install an ACPI notify handler directly instead of using
a .notify() callback in struct acpi_driver.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2559802.jE0xQCEvom@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
