Simplify the locking logic in rzg2l_irq_set_type() by using guard(),
eliminating the need for an explicit unlock call.
[ tglx: Remove the pointless cleanup.h include. The spinlock guards come
from spinlock.h ]
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260328103324.134131-3-biju.das.jz@bp.renesas.com
gic_irq_domain_translate() does not check if an interrupt number lies
within the valid range of the specified interrupt type. Add these checks,
and print a warning if the interrupt number is out of range.
This can help flagging incorrectly described Extended SPI and PPI
interrupts in DT.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://patch.msgid.link/ce695ea46decc816974179314a86f2b9b5cad6a9.1772799134.git.geert+renesas@glider.be
The RZ/G3L SoC has 16 external interrupts, of which 8 are shared with TINT
(GPIO interrupts), whereas RZ/G2L has only 8 external interrupts with no
sharing. The shared interrupt line selection between external interrupt and
GPIO interrupt is based on the INTTSEL register. Add shared_irq_cnt
variable to struct rzg2l_hw_info handle these differences.
Add used_irqs bitmap to struct rzg2l_irqc_priv to track allocation state.
In the alloc callback, use test_and_set_bit() to enforce mutual exclusion
and configure the INTTSEL register to route to either the external
interrupt or TINT. In the free callback, use test_and_clear_bit() to
release the shared interrupt line and reset the INTTSEL. Also add INTTSEL
register save/restore support to the suspend/resume path.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260325192451.172562-17-biju.das.jz@bp.renesas.com
The IRQC block on the RZ/G3L SoC is almost identical to the one found on
the RZ/G2L SoC, with the following differences:
- The number of GPIO interrupts for TINT selection is 113 instead of 123.
- The pin index and TINT selection index are not in the 1:1 map.
- The number of external interrupts are 16 instead of 8, out of these
8 external interrupts are shared with TINT.
Add support for the RZ/G3L driver by filling the rzg2l_hw_info table and
adding LUT for mapping between pin index and TINT selection index.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260325192451.172562-16-biju.das.jz@bp.renesas.com
The total number of external interrupts in RZ/G2L and RZ/G3L SoC are
different. The RZ/G3L has 16 external interrupts whereas RZ/G2L has only 8
external interrupts. Add irq_count variable in struct rzg2l_hw_info to
handle these differences and drop the macro IRQC_IRQ_COUNT.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260325192451.172562-15-biju.das.jz@bp.renesas.com
The IRQC_TINT_START value is different for RZ/G3L and RZ/G2L SoC. Add
tint_start variable in struct rzg2l_hw_info to handle this difference and
drop the macro IRQC_TINT_START.
While at it, update the variable type of titseln, tssr_offset, tssr_index,
index, and sense to unsigned int, in rzg2l_tint_set_edge() as these
variables are used only for calculation.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260325192451.172562-14-biju.das.jz@bp.renesas.com
The total number of interrupts in RZ/G2L and RZ/G3L SoC are different.
Introduce struct rzg2l_hw_info to handle the hardware differences and
replace the macro IRQC_NUM_IRQ with num_irq variable in struct
rzg2l_hw_info.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260325192451.172562-13-biju.das.jz@bp.renesas.com
The total number of interrupts in RZ/G2L and RZ/G3L SoC are different. The
RZ/G3L has 16 external interrupts whereas RZ/G2L has only 8 external
interrupts. Dynamically allocate fwspec memory instead of static allocation
to support both SoCs.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260325192451.172562-12-biju.das.jz@bp.renesas.com
rzfive_irqc_mask() and rzfive_irqc_unmask() use hw_irq range checks to
dispatch between IRQ and TINT masking operations. Split each into two
dedicated handlers — rzfive_irqc_irq_mask(), rzfive_irqc_tint_mask(),
rzfive_irqc_irq_unmask(), and rzfive_irqc_tint_unmask() — each operating
unconditionally on its respective interrupt type, removing the runtime
conditionals.
Assign the IRQ-specific handlers to rzfive_irqc_irq_chip and the
TINT-specific handlers to rzfive_irqc_tint_chip, consistent with the
separation applied to the EOI, set_type, and enable/disable callbacks in
previous patches.
While at it, simplify rzfive_irqc_{irq,tint}_{mask,unmask}() by replacing
raw_spin_lock locking/unlocking with scoped_guard().
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260325192451.172562-11-biju.das.jz@bp.renesas.com
rzfive_tint_irq_endisable() handles both IRQ and TINT enable/disable paths
via a hw_irq range check.
Split this into two dedicated helpers, rzfive_irq_endisable() for IRQ
interrupts and rzfive_tint_endisable() for TINT interrupts, each operating
unconditionally on their respective interrupt type.
While at it, simplify rzfive_{irq,tint}_endisable by replacing
raw_spin_lock locking/unlocking with guard() and update the variable types
of offset, tssr_offset, and tssr_index to unsigned int, as these variables
are used only for calculation.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260325192451.172562-10-biju.das.jz@bp.renesas.com
rzg2l_irqc_irq_disable() and rzg2l_irqc_irq_enable() are used by both the
IRQ and TINT chips, but only perform TINT-specific work via
rzg2l_tint_irq_endisable(), guarded by a hw_irq range check.
Since the IRQ chip does not require this extra enable/disable handling,
replace its callbacks with the generic irq_chip_disable_parent() and
irq_chip_enable_parent() directly.
While at it, simplify rzfive_irqc_irq_enable() by replacing raw_spin_lock
locking/unlocking with guard() and update the variable types of offset,
tssr_offset, and tssr_index to unsigned int, as these variables are used
only for calculation.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260325192451.172562-9-biju.das.jz@bp.renesas.com
The common rzg2l_irqc_set_type() handler uses hw_irq range checks to
dispatch to either rzg2l_irq_set_type() or rzg2l_tint_set_edge().
Split this into two dedicated handlers, rzg2l_irqc_irq_set_type() and
rzg2l_irqc_tint_set_type(), each calling only their respective type
configuration function without runtime conditionals.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260325192451.172562-8-biju.das.jz@bp.renesas.com
The common rzg2l_irqc_eoi() handler uses a conditional to determine whether
to clear an IRQ or an TINT interrupt.
Split this into two dedicated handlers, rzg2l_irqc_irq_eoi() and
rzg2l_irqc_tint_eoi(), each handling only their respective interrupt type
without the need for range checks.
While at it, simplify rzg2l_irqc_{irq,tint}_eoi() by replacing
raw_spin_lock locking/unlocking with scoped_guard().
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260325192451.172562-7-biju.das.jz@bp.renesas.com
The driver uses a single irq_chip instance shared across all interrupt
types, relying on dispatcher callbacks to differentiate between IRQ and
TINT regions at runtime.
Replace the per-SoC irq_chip and its dispatcher callbacks with dedicated
irq_chip instances for each interrupt region: IRQ and TINT. Subsequent
patches will add per-region callbacks for IRQ and TINT from the common
code.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260325192451.172562-6-biju.das.jz@bp.renesas.com
The check `hwirq < IRQC_TINT_START` in rzg2l_irqc_alloc() is unnecessary as
the condition is already guaranteed to be false at that point in the code.
The outer `if (hwirq > IRQC_IRQ_COUNT)` block ensures that hwirq is always
above IRQC_IRQ_COUNT before reaching this check, and since IRQC_TINT_START
<= IRQC_IRQ_COUNT, the guard can never trigger.
Remove the dead code to simplify the allocation path.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260325192451.172562-5-biju.das.jz@bp.renesas.com
Replace pm_runtime_put() with pm_runtime_put_sync() when
irq_domain_create_hierarchy() fails to ensure the device suspends
synchronously before devres cleanup disables runtime PM via
pm_runtime_disable().
[ tglx: Fix up subject and change log to be precise ]
Fixes: 7de11369ef ("irqchip/renesas-rzg2l: Use devm_pm_runtime_enable()")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260325192451.172562-4-biju.das.jz@bp.renesas.com
Document RZ/G3L (R9A08G046) IRQC. The IRQC block on the RZ/G3L SoC is
nearly identical to that found on the RZ/G3S SoC, with the following
differences: it supports more external interrupts and GPT error
interrupts, and adds registers for GPT/MTU interrupt selection and shared
interrupt selection between external interrupt and TINT. A new compatible
string "renesas,r9a08g046-irqc" is therefore introduced for the RZ/G3L
SoC.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260325192451.172562-3-biju.das.jz@bp.renesas.com
Simplify the bindings by using pattern property for interrupt-names.
It also allows to change the ordering of interrupts.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260325192451.172562-2-biju.das.jz@bp.renesas.com
As the driver now supports OF-based platforms, it's now possible to use it
on MIPS Loongson64 machines.
Drop the requirement of LOONGARCH for this driver, to allow build on
both MIPS-based and LoongArch-based Loongson systems.
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://patch.msgid.link/20260321092032.3502701-7-zhengxingda@iscas.ac.cn
The OF-based MIPS Loongson-3 systems can also have a PCH LPC interrupt
controller.
Add OF-based initialization code for this driver.
Co-developed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://patch.msgid.link/20260321092032.3502701-6-zhengxingda@iscas.ac.cn
A lot of code can be shared between the existing ACPI init flow with the
upcoming OF init flow.
Extract it into a dedicated function.
The re-ordering of parent interrupt allocation requires the architecture
code to reserve legacy interrupts from the dynamic allocation by overriding
arch_dynirq_lower_bound(), otherwise the parent of LPC irqchip will be
allocated in the intended static range of LPC interrupts, which leads to
allocation failure of LPC interrupts.
Co-developed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://patch.msgid.link/20260321092032.3502701-5-zhengxingda@iscas.ac.cn
Loongson 7A series PCH contains an LPC controller with an interrupt
controller.
Add the device tree binding for the interrupt controller.
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260321092032.3502701-4-zhengxingda@iscas.ac.cn
Loongson 7A PCH chips all contain a LPC controller, which is used in
some devices to connect legacy ISA devices (e.g. 8259 PS/2 controller).
The LPC irqchip driver will register LPC interrupts at the fixed range
0~15, and the PCH PIC irqchip driver uses dynamic allocation. However the
LPC interrupt numbers are currently not exempted from dynamic allocation.
The current setup work by accident because the LPC interrupt controller is
the first consumer of PIC interrupt controller, and the PIC interrupt
number is allocated after LPC interrupts are registered. Such setup is
fragile and will stop to work when the LPC irqchip driver is reworked.
Override arch_dynirq_lower_bound() to reserve LPC interrupts from dynamic
allocation, to prevent interrupt number collision and allow rework of the
LPC irqchip driver.
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://patch.msgid.link/20260321092032.3502701-3-zhengxingda@iscas.ac.cn
On some Loongson 3A devices, a LPC bus is present and some legacy devices
(e.g. 8259) on it expect hardcoded low interrupt numbers. However currently
the expected low range interrupt numbers are not exempted from the dynamic
allocation, which leads to conflicts when registering LPC interrupts in the
fixed range.
Override arch_dynirq_lower_bound() to reserve these low range interrupt
numbers and prevent them from being dynamically allocated.
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://patch.msgid.link/20260321092032.3502701-2-zhengxingda@iscas.ac.cn
Replace pm_runtime_put() with pm_runtime_put_sync() when
irq_domain_create_hierarchy() fails to ensure the device suspends
synchronously before devres cleanup disables runtime PM via
pm_runtime_disable().
Fixes: 5ec8cabc3b ("irqchip/renesas-rzv2h: Use devm_pm_runtime_enable()")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260323124917.41602-1-biju.das.jz@bp.renesas.com
The mbox_client for qcom-mpm sends NULL doorbell messages via
mbox_send_message() but never signals TX completion.
Set knows_txdone=true and call mbox_client_txdone() after a successful
send, matching the pattern used by other Qualcomm mailbox clients (smp2p,
smsm, qcom_aoss etc).
Fixes: a6199bb514 "irqchip: Add Qualcomm MPM controller driver"
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260322171533.608436-1-jassisinghbrar@gmail.com
Introduce support for the new AICv3 hardware block in t8122 and t603x
SoCs. AICv3 is similar to AICv2 but has an increased IRQ config offset.
These MMIO offsets are coded as properties of the "aic,3" node in Apple's
device tree. The actual offsets are the same for all SoCs starting from M3
through at least M5.
So do not bother to follow suit but use AICv3 specific defines in the
driver. The compatible string is SoC specific so future SoCs with AICv3
and different offsets would just use their own compatible string as base
and add their new offsets.
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Sven Peter <sven@kernel.org>
Link: https://patch.msgid.link/20260223-irq-apple-aic3-v3-2-2b7328076b8d@jannau.net
AIC version 3 as found on the Apple M3 (t8122) is very similar to AICv2 in
its base functionality. It can use the same device tree bindings as AICv2
so add it to the AICv2 bindings. This interrupt controller is used on all
Apple SoCs starting with M3 up to at least M5.
The only apparent difference is the increased IRQ config offset. Apple's
device tree codes this new offset as property of the "aic" node but the
value stayed constant for all SoCs with "aic,3". Since the SoC specific
compatible "apple,t8122-aic3" will be only used in the driver this offset
can remain a driver implementation detail.
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260223-irq-apple-aic3-v3-1-2b7328076b8d@jannau.net
Add support for the interrupt steering controller found in NXP S32N79
series automotive SoCs.
The S32N79 IRQ_STEER variant differs from the i.MX version by not
implementing the CHANCTRL register. To handle this hardware difference,
introduce a device type data structure with quirks field. The
IRQSTEER_QUIRK_NO_CHANCTRL quirk skips CHANCTRL register access for S32N79
variants.
The interrupt routing functionality and register layout are otherwise
identical between the two variants.
Co-developed-by: Larisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260311081154.381881-4-ciprianmarian.costea@oss.nxp.com
Prefer using IS_ERR_OR_NULL() over using IS_ERR() and a open coded NULL
pointer check.
Change generated with coccinelle.
To: Marc Zyngier <maz@kernel.org>
To: Thomas Gleixner <tglx@kernel.org>
To: Andrew Lunn <andrew@lunn.ch>
To: Gregory Clement <gregory.clement@bootlin.com>
To: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Philipp Hahn <phahn-oss@avm.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260310-b4-is_err_or_null-v1-39-bd63b656022d@avm.de
Handle the RZ/V2H ICU error interrupt to help diagnose latched bus,
ECC RAM, and CA55/IP error conditions.
Support error injection via ICU_SWPE to allow testing the pseudo error
error interrupts.
Account for SoC differences in ECC RAM error register coverage so the
handler only iterates over valid ECC status/clear banks, and route the
RZ/V2N compatible to a probe path with the correct ECC range while
keeping the existing RZ/V2H and RZ/G3E handling.
[ tglx: Convert to hwirq_within() and upgrade to pr_warn() for those errors ]
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260304113317.129339-8-prabhakar.mahadev-lad.rj@bp.renesas.com
The RZ/V2H ICU exposes four software-triggerable interrupts targeting
the CA55 cores (int-ca55-0 to int-ca55-3). Add support for these
interrupts to enable IRQ injection via the generic IRQ injection
framework.
Add a dedicated rzv2h_icu_swint_chip irq_chip for the CA55 region and
implement rzv2h_icu_irq_set_irqchip_state() to handle software interrupt
injection.
[ tglx: Convert to hwirq_within() ]
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260304113317.129339-7-prabhakar.mahadev-lad.rj@bp.renesas.com
Replace the single rzv2h_icu_chip and its dispatcher callbacks with
dedicated irq_chip instances for each interrupt region: NMI, IRQ, and
TINT.
Move the irqd_is_level_type() check ahead of the scoped_guard in
rzv2h_icu_tint_eoi() and rzv2h_icu_irq_eoi() to avoid acquiring the
spinlock unnecessarily for level-type interrupts.
Drop the ICU_TINT_START guard from rzv2h_tint_irq_endisable() since it
is now only reachable via the TINT chip path.
[ tglx: Convert to hwirq_within() ]
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260304113317.129339-6-prabhakar.mahadev-lad.rj@bp.renesas.com
Introduce ICU_IRQ_LAST and ICU_TINT_LAST macros to make range boundaries
explicit and reduce the chance of off-by-one errors.
Extract the TINT information up front in rzv2h_icu_alloc() and validate
the resulting hardware IRQ against the full TINT range
[ICU_TINT_START, ICU_TINT_LAST].
[ tglx: Convert the hard to parse inverse conditions to use a simple helper
macro hwirq_within() which is easy to read, less error prone and
avoids a lot of typing ]
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260304113317.129339-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Make use of dev_err_probe() to simplify rzv2h_icu_probe_common().
Keep dev_err() for -ENOMEM paths, as dev_err_probe() does not print for
allocation failures, ensuring they remain visible in logs.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260304113317.129339-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Avoid dereferencing pdev->dev.of_node again in rzv2h_icu_probe_common().
Reuse the already available local node pointer when mapping the ICU
register space.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260304113317.129339-2-prabhakar.mahadev-lad.rj@bp.renesas.com
This driver currently only supports builds against a PIC32 target. To avoid
future breakage in the future update Kconfig so that it can be built with
COMPILE_TEST enabled.
[ tglx: Drop the now pointless select in the pic32 Kconfig ]
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260222-irqchip-pic32-v1-5-37f50d1f14af@redhat.com
The asm headers are not actually needed when compiling on architectures
other than MIPS, and traps.h is not available on all architectures.
Include them on MIPS systems so that this driver can be compiled on other
architectures.
[ tglx: Massaged change log ]
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260222-irqchip-pic32-v1-4-37f50d1f14af@redhat.com
The board_bind_eic_interrupt() pointer is MIPS specific. When compiling for
other architectures it is undefined which breaks the build.
Define it as a static variable when building for non MIPS architectures
with COMPILE_TEST.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260222-irqchip-pic32-v1-3-37f50d1f14af@redhat.com
plat_irq_dispatch() is specific to the MIPS architecture, so only include
it when the driver is compiled on that architecture. This is in preparation
for allowing this driver to be compiled on all architectures.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260222-irqchip-pic32-v1-2-37f50d1f14af@redhat.com
This driver is currently only build on 32 bit MIPS systems. When building
it on x86_64, the following warning occurs:
drivers/irqchip/irq-pic32-evic.c: In function ‘pic32_ext_irq_of_init’:
./include/linux/kern_levels.h:5:25: error: format ‘%d’ expects argument of type
‘int’, but argument 2 has type ‘long unsigned int’ [-Werror=format=]
Update the printf() formatter in preparation for allowing this driver to
be compiled on all architectures.
Fixes: aaa8666ada ("IRQCHIP: irq-pic32-evic: Add support for PIC32 interrupt controller")
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260222-irqchip-pic32-v1-1-37f50d1f14af@redhat.com
- Fix a build error on parisc
- Remove the non-large-folio-aware function fsverity_verify_page()
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaZtg+xQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOKwQ+AQCiXEYAibl3vHRgQo7qEPCC5or4FtkF
HZ0ERRArhsU17AD/TKHE/AJkyFrwK4rGTb6I9Wi1OXnpG7jihZlYjj03Ag4=
=CUql
-----END PGP SIGNATURE-----
Merge tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux
Pull fsverity fixes from Eric Biggers:
- Fix a build error on parisc
- Remove the non-large-folio-aware function fsverity_verify_page()
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux:
fsverity: fix build error by adding fsverity_readahead() stub
fsverity: remove fsverity_verify_page()
f2fs: make f2fs_verify_cluster() partially large-folio-aware
f2fs: remove unnecessary ClearPageUptodate in f2fs_verify_cluster()
Fix a big endian specific issue in the PPC64-optimized AES code.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaZtiphQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOK/z2AQD1j15Ao3iDW3yBSyTS+tFJaRUVDtjg
bNostoNJAjMM9wD/X0oAnt95WTNkdHexs+2aMzQ4ULKFRcwQrUTarKx7IgY=
=Dmfx
-----END PGP SIGNATURE-----
Merge tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library fix from Eric Biggers:
"Fix a big endian specific issue in the PPC64-optimized AES code"
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crypto: powerpc/aes: Fix rndkey_from_vsx() on big endian CPUs
Stephen retired and stepped back from -next maintainership, update his
entry in CREDITS to recognise his 18 years of hard work making it what
it is today and all the impact it's had on our development process.
Also update to his current GnuPG key while we're here.
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The x509 public key code gained a dependency on the sha256 hash
implementation, causing a rare link time failure in randconfig
builds:
arm-linux-gnueabi-ld: crypto/asymmetric_keys/x509_public_key.o: in function `x509_get_sig_params':
x509_public_key.c:(.text.x509_get_sig_params+0x12): undefined reference to `sha256'
arm-linux-gnueabi-ld: (sha256): Unknown destination type (ARM/Thumb) in crypto/asymmetric_keys/x509_public_key.o
x509_public_key.c:(.text.x509_get_sig_params+0x12): dangerous relocation: unsupported relocation
Select the necessary library code from Kconfig.
Fixes: 2c62068ac8 ("x509: Separately calculate sha256 for blacklist")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Align to the commit bf4afc53b7 ("Convert 'alloc_obj' family to use the
new default GFP_KERNEL argument") update the 'kmalloc_obj' declaration
for userspace to fix below compile error:
In file included from arch/arm/boot/compressed/../../../../lib/decompress_unxz.c:241,
from arch/arm/boot/compressed/decompress.c:56:
arch/arm/boot/compressed/../../../../lib/xz/xz_dec_stream.c: In function 'xz_dec_init':
arch/arm/boot/compressed/../../../../lib/xz/xz_dec_stream.c:787:28: error: implicit declaration of function 'kmalloc_obj'; did you mean 'kmalloc'? [-Wimplicit-function-declaration]
787 | struct xz_dec *s = kmalloc_obj(*s);
| ^~~~~~~~~~~
| kmalloc
Signed-off-by: Haiyue Wang <haiyuewa@163.com>
Fixes: 69050f8d6d ("treewide: Replace kmalloc with kmalloc_obj for non-scalar types")
Fixes: bf4afc53b7 ("Convert 'alloc_obj' family to use the new default GFP_KERNEL argument")
Reviewed-by: Kees Cook <kees@kernel.org>
Acked-by: Lasse Collin <lasse.collin@tukaani.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
