commit 555e882051 upstream.
Add missing vdda-phy-supply and vdda-pll-supply in the (monaco)qcs8300
camss binding. While enabling imx412 sensor for qcs8300 we see a need
to add these supplies which were missing in initial submission.
Fixes: 634a2958fa ("media: dt-bindings: Add qcom,qcs8300-camss compatible")
Cc: stable@vger.kernel.org
Co-developed-by: Nihal Kumar Gupta <quic_nihalkum@quicinc.com>
Signed-off-by: Nihal Kumar Gupta <quic_nihalkum@quicinc.com>
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6b99eeacf6 upstream.
On X Elite platform, the eDP PHY uses one more clock called ref.
The current X Elite devices supported upstream work fine without this
clock, because the boot firmware leaves this clock enabled. But we should
not rely on that. Also, even though this change breaks the ABI, it is
needed in order to make the driver disables this clock along with the
other ones, for a proper bring-down of the entire PHY.
So attach the this ref clock to the PHY.
Cc: stable@vger.kernel.org # v6.10
Fixes: 5d56078613 ("dt-bindings: phy: qcom-edp: Add X1E80100 PHY compatibles")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://patch.msgid.link/20251224-phy-qcom-edp-add-missing-refclk-v5-1-3f45d349b5ac@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dd2fdc3504 upstream.
Commit 5940d1cf9f ("SUNRPC: Rebalance a kref in auth_gss.c") added
a kref_get(&gss_auth->kref) call to balance the gss_put_auth() done
in gss_release_msg(), but forgot to add a corresponding kref_put()
on the error path when kstrdup_const() fails.
If service_name is non-NULL and kstrdup_const() fails, the function
jumps to err_put_pipe_version which calls put_pipe_version() and
kfree(gss_msg), but never releases the gss_auth reference. This leads
to a kref leak where the gss_auth structure is never freed.
Add a forward declaration for gss_free_callback() and call kref_put()
in the err_put_pipe_version error path to properly release the
reference taken earlier.
Fixes: 5940d1cf9f ("SUNRPC: Rebalance a kref in auth_gss.c")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Hodges <git@danielhodges.dev>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3e6397b056 upstream.
The gssx_dec_ctx(), gssx_dec_status(), and gssx_dec_name()
functions allocate memory via gssx_dec_buffer(), which calls
kmemdup(). When a subsequent decode operation fails, these
functions return immediately without freeing previously
allocated buffers, causing memory leaks.
The leak in gssx_dec_ctx() is particularly relevant because
the caller (gssp_accept_sec_context_upcall) initializes several
buffer length fields to non-zero values, resulting in memory
allocation:
struct gssx_ctx rctxh = {
.exported_context_token.len = GSSX_max_output_handle_sz,
.mech.len = GSS_OID_MAX_LEN,
.src_name.display_name.len = GSSX_max_princ_sz,
.targ_name.display_name.len = GSSX_max_princ_sz
};
If, for example, gssx_dec_name() succeeds for src_name but
fails for targ_name, the memory allocated for
exported_context_token, mech, and src_name.display_name
remains unreferenced and cannot be reclaimed.
Add error handling with goto-based cleanup to free any
previously allocated buffers before returning an error.
Reported-by: Xingjing Deng <micro6947@gmail.com>
Closes: https://lore.kernel.org/linux-nfs/CAK+ZN9qttsFDu6h1FoqGadXjMx1QXqPMoYQ=6O9RY4SxVTvKng@mail.gmail.com/
Fixes: 1d658336b0 ("SUNRPC: Add RPC based upcall mechanism for RPCGSS auth")
Cc: stable@vger.kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0ea84089db upstream.
When a non-NCQ command is issued while NCQ commands are being executed,
ata_scsi_qc_issue() indicates to the SCSI layer that the command issuing
should be deferred by returning SCSI_MLQUEUE_XXX_BUSY. This command
deferring is correct and as mandated by the ACS specifications since
NCQ and non-NCQ commands cannot be mixed.
However, in the case of a host adapter using multiple submission queues,
when the target device is under a constant load of NCQ commands, there
are no guarantees that requeueing the non-NCQ command will be executed
later and it may be deferred again repeatedly as other submission queues
can constantly issue NCQ commands from different CPUs ahead of the
non-NCQ command. This can lead to very long delays for the execution of
non-NCQ commands, and even complete starvation for these commands in the
worst case scenario.
Since the block layer and the SCSI layer do not distinguish between
queueable (NCQ) and non queueable (non-NCQ) commands, libata-scsi SAT
implementation must ensure forward progress for non-NCQ commands in the
presence of NCQ command traffic. This is similar to what SAS HBAs with a
hardware/firmware based SAT implementation do.
Implement such forward progress guarantee by limiting requeueing of
non-NCQ commands from ata_scsi_qc_issue(): when a non-NCQ command is
received and NCQ commands are in-flight, do not force a requeue of the
non-NCQ command by returning SCSI_MLQUEUE_XXX_BUSY and instead return 0
to indicate that the command was accepted but hold on to the qc using
the new deferred_qc field of struct ata_port.
This deferred qc will be issued using the work item deferred_qc_work
running the function ata_scsi_deferred_qc_work() once all in-flight
commands complete, which is checked with the port qc_defer() callback
return value indicating that no further delay is necessary. This check
is done using the helper function ata_scsi_schedule_deferred_qc() which
is called from ata_scsi_qc_complete(). This thus excludes this mechanism
from all internal non-NCQ commands issued by ATA EH.
When a port deferred_qc is non NULL, that is, the port has a command
waiting for the device queue to drain, the issuing of all incoming
commands (both NCQ and non-NCQ) is deferred using the regular busy
mechanism. This simplifies the code and also avoids potential denial of
service problems if a user issues too many non-NCQ commands.
Finally, whenever ata EH is scheduled, regardless of the reason, a
deferred qc is always requeued so that it can be retried once EH
completes. This is done by calling the function
ata_scsi_requeue_deferred_qc() from ata_eh_set_pending(). This avoids
the need for any special processing for the deferred qc in case of NCQ
error, link or device reset, or device timeout.
Reported-by: Xingui Yang <yangxingui@huawei.com>
Reported-by: Igor Pylypiv <ipylypiv@google.com>
Fixes: bdb01301f3 ("scsi: Add host and host template flag 'host_tagset'")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Tested-by: Igor Pylypiv <ipylypiv@google.com>
Tested-by: Xingui Yang <yangxingui@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bb3a8154b1 upstream.
Factor out of ata_scsi_translate() the code handling queued command
deferral using the port qc_defer callback and issuing the queued
command with ata_qc_issue() into the new function ata_scsi_qc_issue(),
and simplify the goto used in ata_scsi_translate().
While at it, also add a lockdep annotation to check that the port lock
is held when ata_scsi_translate() is called.
No functional changes.
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ff4a46c278 upstream.
The FTIDE010 has been missing some timing settings since its
inception, since the upstream OpenWrt patch was missing these.
The community has since come up with the appropriate timings.
Fixes: be4e456ed3 ("ata: Add driver for Faraday Technology FTIDE010")
Cc: stable@vger.kernel.org
Signed-off-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3574c322b1 upstream.
Currently we don't used mballoc optimized scanning (using max free
extent order and avg free extent order group lists) for inodes with
indirect block based format. This is confusing for users and I don't see
a good reason for that. Even with indirect block based inode format we
can spend big amount of time searching for free blocks for large
filesystems with fragmented free space. To add to the confusion before
commit 077d0c2c78 ("ext4: make mb_optimize_scan performance mount
option work with extents") optimized scanning was applied *only* to
indirect block based inodes so that commit appears as a performance
regression to some users. Just use optimized scanning whenever it is
enabled by mount options.
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org
Link: https://patch.msgid.link/20260114182836.14120-4-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4865c768b5 upstream.
For filesystems with more than 2^32 blocks inodes using indirect block
based format cannot use blocks beyond the 32-bit limit.
ext4_mb_scan_groups_linear() takes care to not select these unsupported
groups for such inodes however other functions selecting groups for
allocation don't. So far this is harmless because the other selection
functions are used only with mb_optimize_scan and this is currently
disabled for inodes with indirect blocks however in the following patch
we want to enable mb_optimize_scan regardless of inode format.
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Pedro Falcato <pfalcato@suse.de>
Cc: stable@kernel.org
Link: https://patch.msgid.link/20260114182836.14120-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 94a8cea54c upstream.
fstests test generic/388 occasionally reproduces a warning in
ext4_put_super() associated with the dirty clusters count:
WARNING: CPU: 7 PID: 76064 at fs/ext4/super.c:1324 ext4_put_super+0x48c/0x590 [ext4]
Tracing the failure shows that the warning fires due to an
s_dirtyclusters_counter value of -1. IOW, this appears to be a
spurious decrement as opposed to some sort of leak. Further tracing
of the dirty cluster count deltas and an LLM scan of the resulting
output identified the cause as a double decrement in the error path
between ext4_mb_mark_diskspace_used() and the caller
ext4_mb_new_blocks().
First, note that generic/388 is a shutdown vs. fsstress test and so
produces a random set of operations and shutdown injections. In the
problematic case, the shutdown triggers an error return from the
ext4_handle_dirty_metadata() call(s) made from
ext4_mb_mark_context(). The changed value is non-zero at this point,
so ext4_mb_mark_diskspace_used() does not exit after the error
bubbles up from ext4_mb_mark_context(). Instead, the former
decrements both cluster counters and returns the error up to
ext4_mb_new_blocks(). The latter falls into the !ar->len out path
which decrements the dirty clusters counter a second time, creating
the inconsistency.
To avoid this problem and simplify ownership of the cluster
reservation in this codepath, lift the counter reduction to a single
place in the caller. This makes it more clear that
ext4_mb_new_blocks() is responsible for acquiring cluster
reservation (via ext4_claim_free_clusters()) in the !delalloc case
as well as releasing it, regardless of whether it ends up consumed
or returned due to failure.
Fixes: 0087d9fb3f ("ext4: Fix s_dirty_blocks_counter if block allocation failed with nodelalloc")
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Link: https://patch.msgid.link/20260113171905.118284-1-bfoster@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bdc56a9c46 upstream.
A bitmap inconsistency issue was observed during stress tests under
mixed huge-page workloads. Ext4 reported multiple e4b bitmap check
failures like:
ext4_mb_complex_scan_group:2508: group 350, 8179 free clusters as
per group info. But got 8192 blocks
Analysis and experimentation confirmed that the issue is caused by a
race condition between page migration and bitmap modification. Although
this timing window is extremely narrow, it is still hit in practice:
folio_lock ext4_mb_load_buddy
__migrate_folio
check ref count
folio_mc_copy __filemap_get_folio
folio_try_get(folio)
......
mb_mark_used
ext4_mb_unload_buddy
__folio_migrate_mapping
folio_ref_freeze
folio_unlock
The root cause of this issue is that the fast path of load_buddy only
increments the folio's reference count, which is insufficient to prevent
concurrent folio migration. We observed that the folio migration process
acquires the folio lock. Therefore, we can determine whether to take the
fast path in load_buddy by checking the lock status. If the folio is
locked, we opt for the slow path (which acquires the lock) to close this
concurrency window.
Additionally, this change addresses the following issues:
When the DOUBLE_CHECK macro is enabled to inspect bitmap-related
issues, the following error may be triggered:
corruption in group 324 at byte 784(6272): f in copy != ff on
disk/prealloc
Analysis reveals that this is a false positive. There is a specific race
window where the bitmap and the group descriptor become momentarily
inconsistent, leading to this error report:
ext4_mb_load_buddy ext4_mb_load_buddy
__filemap_get_folio(create|lock)
folio_lock
ext4_mb_init_cache
folio_mark_uptodate
__filemap_get_folio(no lock)
......
mb_mark_used
mb_mark_used_double
mb_cmp_bitmaps
mb_set_bits(e4b->bd_bitmap)
folio_unlock
The original logic assumed that since mb_cmp_bitmaps is called when the
bitmap is newly loaded from disk, the folio lock would be sufficient to
prevent concurrent access. However, this overlooks a specific race
condition: if another process attempts to load buddy and finds the folio
is already in an uptodate state, it will immediately begin using it without
holding folio lock.
Signed-off-by: Yongjian Sun <sunyongjian1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260106090820.836242-1-sunyongjian@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ca81109d4a upstream.
In ext4_ext_shift_extents(), if the extent is NULL in the while loop, the
function returns immediately without releasing the path obtained via
ext4_find_extent(), leading to a memory leak.
Fix this by jumping to the out label to ensure the path is properly
released.
Fixes: a18ed359bd ("ext4: always check ext4_ext_find_extent result")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Link: https://patch.msgid.link/20251225084800.905701-1-zilin@seu.edu.cn
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 79b592e8f1 upstream.
When the split extent fails, we might leave some extents still being
processed and return an error directly, which will result in stale
extent entries remaining in the extent status tree. So drop all of the
remaining potentially stale extents if the splitting fails.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Cc: stable@kernel.org
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Message-ID: <20251129103247.686136-8-yi.zhang@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6d882ea3b0 upstream.
When splitting an unwritten extent in the middle and converting it to
initialized in ext4_split_extent() with the EXT4_EXT_MAY_ZEROOUT and
EXT4_EXT_DATA_VALID2 flags set, it could leave a stale unwritten extent.
Assume we have an unwritten file and buffered write in the middle of it
without dioread_nolock enabled, it will allocate blocks as written
extent.
0 A B N
[UUUUUUUUUUUU] on-disk extent U: unwritten extent
[UUUUUUUUUUUU] extent status tree
[--DDDDDDDD--] D: valid data
|<- ->| ----> this range needs to be initialized
ext4_split_extent() first try to split this extent at B with
EXT4_EXT_DATA_PARTIAL_VALID1 and EXT4_EXT_MAY_ZEROOUT flag set, but
ext4_split_extent_at() failed to split this extent due to temporary lack
of space. It zeroout B to N and leave the entire extent as unwritten.
0 A B N
[UUUUUUUUUUUU] on-disk extent
[UUUUUUUUUUUU] extent status tree
[--DDDDDDDDZZ] Z: zeroed data
ext4_split_extent() then try to split this extent at A with
EXT4_EXT_DATA_VALID2 flag set. This time, it split successfully and
leave an written extent from A to N.
0 A B N
[UUWWWWWWWWWW] on-disk extent W: written extent
[UUUUUUUUUUUU] extent status tree
[--DDDDDDDDZZ]
Finally ext4_map_create_blocks() only insert extent A to B to the extent
status tree, and leave an stale unwritten extent in the status tree.
0 A B N
[UUWWWWWWWWWW] on-disk extent W: written extent
[UUWWWWWWWWUU] extent status tree
[--DDDDDDDDZZ]
Fix this issue by always cached extent status entry after zeroing out
the second part.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Cc: stable@kernel.org
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Message-ID: <20251129103247.686136-7-yi.zhang@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8b4b19a2f9 upstream.
Caching extents during the splitting process is risky, as it may result
in stale extents remaining in the status tree. Moreover, in most cases,
the corresponding extent block entries are likely already cached before
the split happens, making caching here not particularly useful.
Assume we have an unwritten extent, and then DIO writes the first half.
[UUUUUUUUUUUUUUUU] on-disk extent U: unwritten extent
[UUUUUUUUUUUUUUUU] extent status tree
|<- ->| ----> dio write this range
First, when ext4_split_extent_at() splits this extent, it truncates the
existing extent and then inserts a new one. During this process, this
extent status entry may be shrunk, and calls to ext4_find_extent() and
ext4_cache_extents() may occur, which could potentially insert the
truncated range as a hole into the extent status tree. After the split
is completed, this hole is not replaced with the correct status.
[UUUUUUU|UUUUUUUU] on-disk extent U: unwritten extent
[UUUUUUU|HHHHHHHH] extent status tree H: hole
Then, the outer calling functions will not correct this remaining hole
extent either. Finally, if we perform a delayed buffer write on this
latter part, it will re-insert the delayed extent and cause an error in
space accounting.
In adition, if the unwritten extent cache is not shrunk during the
splitting, ext4_cache_extents() also conflicts with existing extents
when caching extents. In the future, we will add checks when caching
extents, which will trigger a warning. Therefore, Do not cache extents
that are being split.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Cc: stable@kernel.org
Message-ID: <20251129103247.686136-6-yi.zhang@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1bf6974822 upstream.
When allocating initialized blocks from a large unwritten extent, or
when splitting an unwritten extent during end I/O and converting it to
initialized, there is currently a potential issue of stale data if the
extent needs to be split in the middle.
0 A B N
[UUUUUUUUUUUU] U: unwritten extent
[--DDDDDDDD--] D: valid data
|<- ->| ----> this range needs to be initialized
ext4_split_extent() first try to split this extent at B with
EXT4_EXT_DATA_ENTIRE_VALID1 and EXT4_EXT_MAY_ZEROOUT flag set, but
ext4_split_extent_at() failed to split this extent due to temporary lack
of space. It zeroout B to N and mark the entire extent from 0 to N
as written.
0 A B N
[WWWWWWWWWWWW] W: written extent
[SSDDDDDDDDZZ] Z: zeroed, S: stale data
ext4_split_extent() then try to split this extent at A with
EXT4_EXT_DATA_VALID2 flag set. This time, it split successfully and left
a stale written extent from 0 to A.
0 A B N
[WW|WWWWWWWWWW]
[SS|DDDDDDDDZZ]
Fix this by pass EXT4_EXT_DATA_PARTIAL_VALID1 to ext4_split_extent_at()
when splitting at B, don't convert the entire extent to written and left
it as unwritten after zeroing out B to N. The remaining work is just
like the standard two-part split. ext4_split_extent() will pass the
EXT4_EXT_DATA_VALID2 flag when it calls ext4_split_extent_at() for the
second time, allowing it to properly handle the split. If the split is
successful, it will keep extent from 0 to A as unwritten.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Cc: stable@kernel.org
Message-ID: <20251129103247.686136-3-yi.zhang@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 22784ca541 upstream.
When splitting an extent, if the EXT4_GET_BLOCKS_CONVERT flag is set and
it is necessary to split the target extent in the middle,
ext4_split_extent() first handles splitting the latter half of the
extent and passes the EXT4_EXT_DATA_VALID1 flag. This flag implies that
all blocks before the split point contain valid data; however, this
assumption is incorrect.
Therefore, subdivid EXT4_EXT_DATA_VALID1 into
EXT4_EXT_DATA_ENTIRE_VALID1 and EXT4_EXT_DATA_PARTIAL_VALID1, which
indicate that the first half of the extent is either entirely valid or
only partially valid, respectively. These two flags cannot be set
simultaneously.
This patch does not use EXT4_EXT_DATA_PARTIAL_VALID1, it only replaces
EXT4_EXT_DATA_VALID1 with EXT4_EXT_DATA_ENTIRE_VALID1 at the location
where it is set, no logical changes.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Cc: stable@kernel.org
Message-ID: <20251129103247.686136-2-yi.zhang@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 30bfc2d6a1 upstream.
On MIPS, __current_thread_info is defined as global register variable
locating in $gp, and is simply assigned with new address during kernel
relocation.
This however is broken with LLVM, which always restores $gp if it finds
$gp is clobbered in any form, including when intentionally through a
global register variable. This is against GCC's documentation[1], which
requires a callee-saved register used as global register variable not to
be restored if it's clobbered.
As a result, $gp will continue to point to the unrelocated kernel after
the epilog of relocate_kernel(), leading to an early crash in init_idle,
[ 0.000000] CPU 0 Unable to handle kernel paging request at virtual address 0000000000000000, epc == ffffffff81afada8, ra == ffffffff81afad90
[ 0.000000] Oops[#1]:
[ 0.000000] CPU: 0 UID: 0 PID: 0 Comm: swapper Tainted: G W 6.19.0-rc5-00262-gd3eeb99bbc99-dirty #188 VOLUNTARY
[ 0.000000] Tainted: [W]=WARN
[ 0.000000] Hardware name: loongson,loongson64v-4core-virtio
[ 0.000000] $ 0 : 0000000000000000 0000000000000000 0000000000000001 0000000000000000
[ 0.000000] $ 4 : ffffffff80b80ec0 ffffffff80b53d48 0000000000000000 00000000000f4240
[ 0.000000] $ 8 : 0000000000000100 ffffffff81d82f80 ffffffff81d82f80 0000000000000001
[ 0.000000] $12 : 0000000000000000 ffffffff81776f58 00000000000005da 0000000000000002
[ 0.000000] $16 : ffffffff80b80e40 0000000000000000 ffffffff80b81614 9800000005dfbe80
[ 0.000000] $20 : 00000000540000e0 ffffffff81980000 0000000000000000 ffffffff80f81c80
[ 0.000000] $24 : 0000000000000a26 ffffffff8114fb90
[ 0.000000] $28 : ffffffff80b50000 ffffffff80b53d40 0000000000000000 ffffffff81afad90
[ 0.000000] Hi : 0000000000000000
[ 0.000000] Lo : 0000000000000000
[ 0.000000] epc : ffffffff81afada8 init_idle+0x130/0x270
[ 0.000000] ra : ffffffff81afad90 init_idle+0x118/0x270
[ 0.000000] Status: 540000e2 KX SX UX KERNEL EXL
[ 0.000000] Cause : 00000008 (ExcCode 02)
[ 0.000000] BadVA : 0000000000000000
[ 0.000000] PrId : 00006305 (ICT Loongson-3)
[ 0.000000] Process swapper (pid: 0, threadinfo=(____ptrval____), task=(____ptrval____), tls=0000000000000000)
[ 0.000000] Stack : 9800000005dfbf00 ffffffff8178e950 0000000000000000 0000000000000000
[ 0.000000] 0000000000000000 ffffffff81970000 000000000000003f ffffffff810a6528
[ 0.000000] 0000000000000001 9800000005dfbe80 9800000005dfbf00 ffffffff81980000
[ 0.000000] ffffffff810a6450 ffffffff81afb6c0 0000000000000000 ffffffff810a2258
[ 0.000000] ffffffff81d82ec8 ffffffff8198d010 ffffffff81b67e80 ffffffff8197dd98
[ 0.000000] ffffffff81d81c80 ffffffff81930000 0000000000000040 0000000000000000
[ 0.000000] 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 0.000000] 0000000000000000 000000000000009e ffffffff9fc01000 0000000000000000
[ 0.000000] 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 0.000000] 0000000000000000 ffffffff81ae86dc ffffffff81b3c741 0000000000000002
[ 0.000000] ...
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffff81afada8>] init_idle+0x130/0x270
[ 0.000000] [<ffffffff81afb6c0>] sched_init+0x5c8/0x6c0
[ 0.000000] [<ffffffff81ae86dc>] start_kernel+0x27c/0x7a8
This bug has been reported to LLVM[2] and affects version from (at
least) 18 to 21. Let's work around this by using inline assembly to
assign $gp before a fix is widely available.
Cc: stable@vger.kernel.org
Link: https://gcc.gnu.org/onlinedocs/gcc-15.2.0/gcc/Global-Register-Variables.html # [1]
Link: https://github.com/llvm/llvm-project/issues/176546 # [2]
Signed-off-by: Yao Zi <me@ziyao.cc>
Acked-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 87e4b043b9 upstream.
If the role change while we are suspended, the cdns3 driver switches to the
new mode during resume. However, switching to host mode in this context
causes a NULL pointer dereference.
The host role's start() operation registers a xhci-hcd device, but its
probe is deferred while we are in the resume path. The host role's resume()
operation assumes the xhci-hcd device is already probed, which is not the
case, leading to the dereference. Since the start() operation of the new
role is already called, the resume operation can be skipped.
So skip the resume operation for the new role if a role switch occurs
during resume. Once the resume sequence is complete, the xhci-hcd device
can be probed in case of host mode.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000208
Mem abort info:
...
Data abort info:
...
[0000000000000208] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 0000000096000004 [#1] SMP
Modules linked in:
CPU: 0 UID: 0 PID: 146 Comm: sh Not tainted
6.19.0-rc7-00013-g6e64f4aabfae-dirty #135 PREEMPT
Hardware name: Texas Instruments J7200 EVM (DT)
pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : usb_hcd_is_primary_hcd+0x0/0x1c
lr : cdns_host_resume+0x24/0x5c
...
Call trace:
usb_hcd_is_primary_hcd+0x0/0x1c (P)
cdns_resume+0x6c/0xbc
cdns3_controller_resume.isra.0+0xe8/0x17c
cdns3_plat_resume+0x18/0x24
platform_pm_resume+0x2c/0x68
dpm_run_callback+0x90/0x248
device_resume+0x100/0x24c
dpm_resume+0x190/0x2ec
dpm_resume_end+0x18/0x34
suspend_devices_and_enter+0x2b0/0xa44
pm_suspend+0x16c/0x5fc
state_store+0x80/0xec
kobj_attr_store+0x18/0x2c
sysfs_kf_write+0x7c/0x94
kernfs_fop_write_iter+0x130/0x1dc
vfs_write+0x240/0x370
ksys_write+0x70/0x108
__arm64_sys_write+0x1c/0x28
invoke_syscall+0x48/0x10c
el0_svc_common.constprop.0+0x40/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x34/0x108
el0t_64_sync_handler+0xa0/0xe4
el0t_64_sync+0x198/0x19c
Code: 52800003 f9407ca5 d63f00a0 17ffffe4 (f9410401)
---[ end trace 0000000000000000 ]---
Cc: stable <stable@kernel.org>
Fixes: 2cf2581cd2 ("usb: cdns3: add power lost support for system resume")
Signed-off-by: Thomas Richard (TI) <thomas.richard@bootlin.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://patch.msgid.link/20260130-usb-cdns3-fix-role-switching-during-resume-v1-1-44c456852b52@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f0157ce46c ]
The plane scaling hw seems to have the same min/max plane scaling limits
for all 16 bpc / 64 bpp interleaved pixel color formats.
Therefore add cases to amdgpu_dm_plane_get_min_max_dc_plane_scaling() for
all the 16 bpc fixed-point / unorm formats to use the same .fp16
up/downscaling factor limits as used by the fp16 floating point formats.
So far, 16 bpc unorm formats were not handled, and the default: path
returned max/min factors for 32 bpp argb8888 formats, which were wrong
and bigger than what many DCE / DCN hw generations could handle.
The result sometimes was misscaling of framebuffers with
DRM_FORMAT_XRGB16161616, DRM_FORMAT_ARGB16161616, DRM_FORMAT_XBGR16161616,
DRM_FORMAT_ABGR16161616, leading to very wrong looking display, as tested
on Polaris11 / DCE-11.2.
So far this went unnoticed, because only few userspace clients used such
16 bpc unorm framebuffers, and those didn't use hw plane scaling, so they
did not experience this issue.
With upcoming Mesa 26 exposing 16 bpc unorm formats under both OpenGL
and Vulkan under Wayland, and the upcoming GNOME 50 Mutter Wayland
compositor allowing for direct scanout of these formats, the scaling
hw will be used on these formats if possible for HiDPI display scaling,
so it is important to use the correct hw scaling limits to avoid wrong
display.
Tested on AMD Polaris 11 / DCE 11.2 with upcoming Mesa 26 and GNOME 50
on HiDPI displays with scaling enabled. The mutter Wayland compositor now
correctly falls back to scaling via desktop compositing instead of direct
scanout, thereby avoiding wrong image display. For unscaled mode, it
correctly uses direct scanout.
Fixes: 580204038f ("drm/amd/display: Enable support for 16 bpc fixed-point framebuffers.")
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Tested-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0783052534 ]
Drivers will not always call set_sysclk() for all clocks, especially when
default mclk-fs can be used.
When that is the case, use the clock rate set in the params multiplied by the
default mclk-fs.
Fixes: 5323186e2e ("ASoC: rockchip: i2s_tdm: Re-add the set_sysclk callback")
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Reported-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260218201834.924358-1-detlev.casanova@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 705d01c8d7 ]
The function idle_thread_get() can return an error pointer and is not
checked for it. Add check for error pointer.
Detected by Smatch:
arch/x86/hyperv/hv_vtl.c:126 hv_vtl_bringup_vcpu() error:
'idle' dereferencing possible ERR_PTR()
Fixes: 2b4b90e053 ("x86/hyperv: Use per cpu initial stack for vtl context")
Signed-off-by: Ethan Tidmore <ethantidmore06@gmail.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ecb7c2484c ]
If btrfs_search_slot_for_read() returns 1, it means we did not find any
key greater than or equals to the key we asked for, meaning we have
reached the end of the tree and therefore the path is not valid. If
this happens we need to break out of the loop and stop, instead of
continuing and accessing an invalid path.
Fixes: 5223cc60b4 ("btrfs: drop the path before adding qgroup items when enabling qgroups")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2155d0c0a7 ]
When initializing the delayed refs block reserve for a transaction handle
we are passing a type of BTRFS_BLOCK_RSV_DELOPS, which is meant for
delayed items and not for delayed refs. The correct type for delayed refs
is BTRFS_BLOCK_RSV_DELREFS.
On release of any excess space reserved in a local delayed refs reserve,
we also should transfer that excess space to the global block reserve
(it it's full, we return to the space info for general availability).
By initializing a transaction's local delayed refs block reserve with a
type of BTRFS_BLOCK_RSV_DELOPS, we were also causing any excess space
released from the delayed block reserve (fs_info->delayed_block_rsv, used
for delayed inodes and items) to be transferred to the global block
reserve instead of the global delayed refs block reserve. This was an
unintentional change in commit 28270e25c6 ("btrfs: always reserve space
for delayed refs when starting transaction"), but it's not particularly
serious as things tend to cancel out each other most of the time and it's
relatively rare to be anywhere near exhaustion of the global reserve.
Fix this by initializing a transaction's local delayed refs reserve with
a type of BTRFS_BLOCK_RSV_DELREFS and making btrfs_block_rsv_release()
attempt to transfer unused space from such a reserve into the global block
reserve, just as we did before that commit for when the block reserve is
a delayed refs rsv.
Reported-by: Alex Lyakas <alex.lyakas@zadara.com>
Link: https://lore.kernel.org/linux-btrfs/CAOcd+r0FHG5LWzTSu=LknwSoqxfw+C00gFAW7fuX71+Z5AfEew@mail.gmail.com/
Fixes: 28270e25c6 ("btrfs: always reserve space for delayed refs when starting transaction")
Reviewed-by: Alex Lyakas <alex.lyakas@zadara.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5870ec7c8f ]
Block group size classes are managed consistently everywhere.
Currently, btrfs_use_block_group_size_class() sets a block group's size
class to specialize it for a specific allocation size. However, this
size class remains "stale" even if the block group becomes completely
empty (both used and reserved bytes reach zero).
This happens in two scenarios:
1. When space reservations are freed (e.g., due to errors or transaction
aborts) via btrfs_free_reserved_bytes().
2. When the last extent in a block group is freed via
btrfs_update_block_group().
While size classes are advisory, a stale size class can cause
find_free_extent to unnecessarily skip candidate block groups during
initial search loops. This undermines the purpose of size classes to
reduce fragmentation by keeping block groups restricted to a specific
size class when they could be reused for any size.
Fix this by resetting the size class to BTRFS_BG_SZ_NONE whenever a
block group's used and reserved counts both reach zero. This ensures
that empty block groups are fully available for any allocation size in
the next cycle.
Fixes: 52bb7a2166 ("btrfs: introduce size class to block group allocator")
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Jiasheng Jiang <jiashengjiangcool@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8b6fa164ab ]
There's no need to update the space_info fields (bytes_reserved,
max_extent_size, bytes_readonly, bytes_zone_unusable) while holding the
block group's spinlock. So move those updates to happen after we unlock
the block group (and while holding the space_info locked of course), so
that all we do under the block group's critical section is to update the
block group itself.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 5870ec7c8f ("btrfs: reset block group size class when it becomes empty")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e3df6408b1 ]
We don't need it since we can grab fs_info from the given space_info.
So remove the fs_info argument.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <asj@kernel.org>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 5870ec7c8f ("btrfs: reset block group size class when it becomes empty")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0862438c90 ]
The reserve_unaccepted() function incorrectly calculates the size of the
memblock reservation for the unaccepted memory table. It aligns the
size of the table, but fails to account for cases where the table's
starting physical address (efi.unaccepted) is not page-aligned.
If the table starts at an offset within a page and its end crosses into
a subsequent page that the aligned size does not cover, the end of the
table will not be reserved. This can lead to the table being overwritten
or inaccessible, causing a kernel panic in accept_memory().
This issue was observed when starting Intel TDX VMs with specific memory
sizes (e.g., > 64GB).
Fix this by calculating the end address first (including the unaligned
start) and then aligning it up, ensuring the entire range is covered
by the reservation.
Fixes: 8dbe33956d ("efi/unaccepted: Make sure unaccepted table is mapped")
Reported-by: Moritz Sanft <ms@edgeless.systems>
Signed-off-by: Kiryl Shutsemau (Meta) <kas@kernel.org>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fbd03587ba ]
As of 86ef402d80 ("gpiolib: sanitize the return value of
gpio_chip::get()") gpiolib requires drivers implementing GPIOs to only
return 0, 1 or negative error for the get() callbacks. Ensure that
amd-fch complies with this requirement.
Fixes: 86ef402d80 ("gpiolib: sanitize the return value of gpio_chip::get()")
Reported-and-tested-by: Tj <tj.iam.tj@proton.me>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://patch.msgid.link/aZTlwnvHt2Gho4yN@google.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e83a8d58e ]
As per uapi documentation[1], the prerequisite for wedged device is to
redirected page faults to a dummy page. Follow it.
[1] Documentation/gpu/drm-uapi.rst
v2: Add uapi reference and fixes tag (Matthew Brost)
Fixes: 7bc00751f8 ("drm/xe: Use device wedged event")
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260212055622.2054991-1-raag.jadav@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit c020fff70d)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1acec6ef05 ]
vram_bar_size is registered as an int module parameter and is documented
to accept negative values to disable BAR resizing.
Store it as an int in xe_modparam as well, so negative values work as
intended and the module_param type matches.
Fixes: 80742a1aa2 ("drm/xe: Allow to drop vram resizing")
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Link: https://patch.msgid.link/20260202181853.1095736-2-shuicheng.lin@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 25c9aa4dcb)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc6387a2e0 ]
The PSS_CHICKEN register has been part of the RCS engine's LRC since it
was first introduced in Xe_LP. That means that any workarounds that
adjust its value (such as Wa_14019988906 and Wa_14019877138) need to be
implemented in the lrc_was[] table so that they become part of the
default LRC from which all subsequent LRCs are copied. Although these
workarounds were implemented correctly on most platforms, they were
incorrectly placed on the engine_was[] table for Xe2_HPG.
Move the workarounds to the proper lrc_was[] table and switch the
'xe_rtp_match_first_render_or_compute' rule to specifically match the
RCS since that's the engine whose LRC manages the register.
Bspec: 65182
Fixes: 7f3ee7d880 ("drm/xe/xe2hpg: Add initial GT workarounds")
Reviewed-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Link: https://patch.msgid.link/20260205220508.51905-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit e04c609eed)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4a9b4e1fa5 ]
xe_mmio_read64_2x32() was adjusting register addresses and then
calling xe_mmio_read32(), which applies the adjustment again.
This may shift accesses twice if adj_offset < adj_limit. There is
no issue currently, as for media gt, adj_offset > adj_limit, so
the 2nd adjust will be a no-op. But it may not work in future.
To fix it, replace the adjusted-address comparison with a direct
sanity check that ensures the MMIO address adjustment cutoff never
falls within the 8-byte range of a 64-bit register. And let
xe_mmio_read32() handle address translation.
v2: rewrite the sanity check in a more natural way. (Matt)
v3: Add Fixes tag. (Jani)
Fixes: 07431945d8 ("drm/xe: Avoid 64-bit register reads")
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Link: https://patch.msgid.link/20260130165621.471408-2-shuicheng.lin@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit a30f999681)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a673fb4d7 ]
On some configs and old compilers we can get following build errors:
../drivers/gpu/drm/xe/xe_configfs.h: In function 'xe_configfs_get_ctx_restore_mid_bb':
../drivers/gpu/drm/xe/xe_configfs.h:40:76: error: parameter name omitted
static inline u32 xe_configfs_get_ctx_restore_mid_bb(struct pci_dev *pdev, enum xe_engine_class,
^~~~~~~~~~~~~~~~~~~~
../drivers/gpu/drm/xe/xe_configfs.h: In function 'xe_configfs_get_ctx_restore_post_bb':
../drivers/gpu/drm/xe/xe_configfs.h:42:77: error: parameter name omitted
static inline u32 xe_configfs_get_ctx_restore_post_bb(struct pci_dev *pdev, enum xe_engine_class,
^~~~~~~~~~~~~~~~~~~~
when trying to define our configfs stub functions. Fix that.
Fixes: 7a4756b2fd ("drm/xe/lrc: Allow to add user commands mid context switch")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Shuicheng Lin <shuicheng.lin@intel.com>
Link: https://patch.msgid.link/20260203193745.576-1-michal.wajdeczko@intel.com
(cherry picked from commit f59cde8a24)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dd3411959b ]
The commit c8424e776b ("MODSIGN: Export module signature definitions")
replaced the dependency of KEXEC_SIG on SYSTEM_DATA_VERIFICATION with the
dependency on MODULE_SIG_FORMAT. This change disables KEXEC_SIG in s390
kernels built with MODULES=n if nothing else selects MODULE_SIG_FORMAT.
Furthermore, the signature verification in s390 kexec does not require
MODULE_SIG_FORMAT because it requires only the struct module_signature and,
therefore, does not depend on code in kernel/module_signature.c.
But making ARCH_SUPPORTS_KEXEC_SIG depend on SYSTEM_DATA_VERIFICATION is
also incorrect because it makes KEXEC_SIG available on s390 only if some
other arbitrary option (for instance a file system or device driver)
selects it directly or indirectly.
To properly make KEXEC_SIG available for s390 kernels built with MODULES=y
as well as MODULES=n _and_ also not depend on arbitrary options selecting
SYSTEM_DATA_VERIFICATION, set ARCH_SUPPORTS_KEXEC_SIG=y for s390 and select
SYSTEM_DATA_VERIFICATION when KEXEC_SIG=y.
Fixes: c8424e776b ("MODSIGN: Export module signature definitions")
Suggested-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 888a0a802c ]
platform_get_resource_byname() can return NULL, which would cause a crash
when passed the pointer to resource_size().
Move the fiu->memory_size assignment after the error check for
devm_ioremap_resource() to prevent the potential NULL pointer dereference.
Fixes: 9838c18247 ("spi: wpcm-fiu: Add direct map support")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: J. Neuschäfer <j.ne@posteo.net>
Link: https://patch.msgid.link/20260212-wpcm-v1-1-5b7c4f526aac@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit abde491143 ]
eng_id can be negative and that stream_enc_regs[]
can be indexed out of bounds.
eng_id is used directly as an index into stream_enc_regs[], which has
only 5 entries. When eng_id is 5 (ENGINE_ID_DIGF) or negative, this can
access memory past the end of the array.
Add a bounds check using ARRAY_SIZE() before using eng_id as an index.
The unsigned cast also rejects negative values.
This avoids out-of-bounds access.
Fixes the below smatch error:
dcn*_resource.c: stream_encoder_create() may index
stream_enc_regs[eng_id] out of bounds (size 5).
drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn351/dcn351_resource.c
1246 static struct stream_encoder *dcn35_stream_encoder_create(
1247 enum engine_id eng_id,
1248 struct dc_context *ctx)
1249 {
...
1255
1256 /* Mapping of VPG, AFMT, DME register blocks to DIO block instance */
1257 if (eng_id <= ENGINE_ID_DIGF) {
ENGINE_ID_DIGF is 5. should <= be <?
Unrelated but, ugh, why is Smatch saying that "eng_id" can be negative?
end_id is type signed long, but there are checks in the caller which prevent it from being negative.
1258 vpg_inst = eng_id;
1259 afmt_inst = eng_id;
1260 } else
1261 return NULL;
1262
...
1281
1282 dcn35_dio_stream_encoder_construct(enc1, ctx, ctx->dc_bios,
1283 eng_id, vpg, afmt,
--> 1284 &stream_enc_regs[eng_id],
^^^^^^^^^^^^^^^^^^^^^^^ This stream_enc_regs[] array has 5 elements so we are one element beyond the end of the array.
...
1287 return &enc1->base;
1288 }
v2: use explicit bounds check as suggested by Roman/Dan; avoid unsigned int cast
v3: The compiler already knows how to compare the two values, so the
cast (int) is not needed. (Roman)
Fixes: 2728e9c7c8 ("drm/amd/display: add DC changes for DCN351")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Mario Limonciello <superm1@kernel.org>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: ChiaHsuan Chung <chiahsuan.chung@amd.com>
Cc: Roman Li <roman.li@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 41af6215cd ]
Currently DCE doesn't support the overlay cursor, so the
dm_crtc_get_cursor_mode() function returns DM_CURSOR_NATIVE_MODE
unconditionally. The outcome is that it doesn't check for the
conditions that would necessitate the overlay cursor, meaning
that it doesn't reject cases where the native cursor mode isn't
supported on DCE.
Remove the early return from dm_crtc_get_cursor_mode() for
DCE and instead let it perform the necessary checks and
return DM_CURSOR_OVERLAY_MODE. Add a later check that rejects
when DM_CURSOR_OVERLAY_MODE would be used with DCE.
Fixes: 1b04dcca4f ("drm/amd/display: Introduce overlay cursor mode")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4600
Suggested-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5a19302cab ]
The address watch clear code receives watch_id as an unsigned value
(u32), but some helper functions were using a signed int and checked
bits by shifting with watch_id.
If a very large watch_id is passed from userspace, it can be converted
to a negative value. This can cause invalid shifts and may access
memory outside the watch_points array.
drm/amdkfd: Fix watch_id bounds checking in debug address watch v2
Fix this by checking that watch_id is within MAX_WATCH_ADDRESSES before
using it. Also use BIT(watch_id) to test and clear bits safely.
This keeps the behavior unchanged for valid watch IDs and avoids
undefined behavior for invalid ones.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_debug.c:448
kfd_dbg_trap_clear_dev_address_watch() error: buffer overflow
'pdd->watch_points' 4 <= u32max user_rl='0-3,2147483648-u32max' uncapped
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_debug.c
433 int kfd_dbg_trap_clear_dev_address_watch(struct kfd_process_device *pdd,
434 uint32_t watch_id)
435 {
436 int r;
437
438 if (!kfd_dbg_owns_dev_watch_id(pdd, watch_id))
kfd_dbg_owns_dev_watch_id() doesn't check for negative values so if
watch_id is larger than INT_MAX it leads to a buffer overflow.
(Negative shifts are undefined).
439 return -EINVAL;
440
441 if (!pdd->dev->kfd->shared_resources.enable_mes) {
442 r = debug_lock_and_unmap(pdd->dev->dqm);
443 if (r)
444 return r;
445 }
446
447 amdgpu_gfx_off_ctrl(pdd->dev->adev, false);
--> 448 pdd->watch_points[watch_id] = pdd->dev->kfd2kgd->clear_address_watch(
449 pdd->dev->adev,
450 watch_id);
v2: (as per, Jonathan Kim)
- Add early watch_id >= MAX_WATCH_ADDRESSES validation in the set path to
match the clear path.
- Drop the redundant bounds check in kfd_dbg_owns_dev_watch_id().
Fixes: e0f85f4690 ("drm/amdkfd: add debug set and clear address watch points operation")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Jonathan Kim <jonathan.kim@amd.com>
Cc: Felix Kuehling <felix.kuehling@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e5f72cb9ce ]
After ebe091ad81 ("PCI: Use pbus_select_window_for_type() during IO
window sizing") and ae88d0b9c5 ("PCI: Use pbus_select_window_for_type()
during mem window sizing"), many bridge windows can't get resources
assigned:
pci 0006:05:00.0: bridge window [??? 0x00001000-0x00001fff flags 0x20080000]: can't assign; no space
pci 0006:05:00.0: bridge window [??? 0x00001000-0x00001fff flags 0x20080000]: failed to assign
Those commits replace find_bus_resource_of_type() with
pbus_select_window_for_type(), and the latter lacks resource type
validation.
Add the resource type validation back to pbus_select_window_for_type() to
match the original behavior.
Fixes: 74afce3dfc ("PCI: Add bridge window selection functions")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221072
Signed-off-by: Kai-Heng Feng <kaihengf@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20260210142058.82701-1-kaihengf@nvidia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b82fa9b0c2 ]
The aw88261_dev_reg_update() function sets the Awinic registers in a
rather nonuniform way:
- most registers get directly overwritten from the firmware blob
- but a handful of them need more delicate logic to preserve
some bits from their current value, according to a register-
specific mask
For the latter, the logic is basically
NEW = (OLD & MASK) | (VAL & ~MASK)
However, the ~MASK value is hand-computed, and in the specific case
of the SYSCTRL register, in a buggy way.
This patch restores the proper ~MASK value.
Fixes: 028a2ae256 ("ASoC: codecs: Add aw88261 amplifier driver")
Signed-off-by: Alexandre Ferrieux <alexandre.ferrieux@orange.com>
Link: https://patch.msgid.link/20260211-aw88261-fwname-v1-1-e24e833a019d@fairphone.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f16d96e12 ]
This reverts commit f514248727 ("ASoC: fsl_xcvr: fix missing lock in fsl_xcvr_mode_put()").
The original patch attempted to acquire the card->controls_rwsem lock in
fsl_xcvr_mode_put(). However, this function is called from the upper ALSA
core function snd_ctl_elem_write(), which already holds the write lock on
controls_rwsem for the whole put operation. So there is no need to simply
hold the lock for fsl_xcvr_activate_ctl() again.
Acquiring the read lock while holding the write lock in the same thread
results in a deadlock and a hung task, as reported by Alexander Stein.
Fixes: f514248727 ("ASoC: fsl_xcvr: fix missing lock in fsl_xcvr_mode_put()")
Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Closes: https://lore.kernel.org/linux-sound/5056506.GXAFRqVoOG@steina-w/
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Link: https://patch.msgid.link/20260210185714.556385-1-n7l8m4@u.northwestern.edu
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e7577cd5d ]
Replace hlist_for_each_entry_rcu() with hlist_for_each_entry_srcu()
in mshv_irqfd_resampler_ack() to correctly handle SRCU-protected
linked list traversal.
The function uses SRCU (sleepable RCU) synchronization via
partition->pt_irq_srcu, but was incorrectly using the RCU variant
for list iteration. This could lead to race conditions when the
list is modified concurrently.
Also add srcu_read_lock_held() assertion as required by
hlist_for_each_entry_srcu() to ensure we're in the proper
read-side critical section.
Fixes: 621191d709 ("Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs")
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Anirudh Rayabharam (Microsoft) <anirudh@anirudhrb.com>
Acked-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 56423871e9 ]
There is no firmware version dependency. This also
enables sdma queue resets on all SDMA 6.x based
chips.
Fixes: 59fd50b866 ("drm/amdgpu: Add sysfs interface for sdma reset mask")
Cc: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Jesse.Zhang <Jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 314d30ad50 ]
There is no firmware version dependency. This also
enables sdma queue resets on all SDMA 5.2.x based
chips.
Fixes: 59fd50b866 ("drm/amdgpu: Add sysfs interface for sdma reset mask")
Cc: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Jesse.Zhang <Jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad0a48e531 ]
Move everything to the supported resets masks rather than
having an explicit misc checks for this.
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 46a2cb7d24 ("drm/amdgpu/sdma5: enable queue resets unconditionally")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee41e5b63c ]
When amdgpu_nbio_ras_sw_init() fails in amdgpu_ras_init(), the function
returns directly without freeing the allocated con structure, leading
to a memory leak.
Fix this by jumping to the release_con label to properly clean up the
allocated memory before returning the error code.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: fdc94d3a8c ("drm/amdgpu: Rework pcie_bif ras sw_init")
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c44d61945 ]
amdgpu_discovery_get_nps_info() internally allocates memory for ranges
using kvcalloc(), which may use vmalloc() for large allocation. Using
kfree() to release vmalloc memory will lead to a memory corruption.
Use kvfree() to safely handle both kmalloc and vmalloc allocations.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: b194d21b9b ("drm/amdgpu: Use NPS ranges from discovery table")
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
