Commit graph

150,846 commits

Author SHA1 Message Date
Ondrej Zary
7ba07d16bd pata_it821x: resume from hibernation fails with RAID volume
Hibernation didn't work for me since I started to use IT8212 controller.
I did some debugging (booting with no_console_suspend init=/bin/sh).

Found that resume fails (2.6.28) with "serial number mismatch 'some
garbage' != 'some other garbage'" and "revalidation failed" messages.
That's because the controller firmware fills different serial number in
the IDENTIFY every boot.

The patch below fixes the resume simply clearing the serial number.  The
proper fix would be probably to fill in the serial number of the RAID
volume instead.  I assume that there must be something like that stored on
the drives but I don't know where.

Fix resume on pata_it821x RAID volume by clearing the serial number in
IDENTIFY data, which is otherwise different on each boot.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-02-25 15:22:44 -05:00
Linus Torvalds
a36e4f0cab Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  ide: fix refcounting in device drivers
  ide-cd: document capacity hack
  it821x: remove dead URL
  atiixp: fix missing parentheses
  amd74xx: device/vendor confusion
  ide: ide.c 'clear' fix, update "ide=nodma" documentation
2009-02-25 12:22:06 -08:00
Hugh Dickins
0b0a0806b0 shmem: fix shared anonymous accounting
Each time I exit Firefox, /proc/meminfo's Committed_AS goes down almost
400 kB: OVERCOMMIT_NEVER would be allowing overcommits it should
prohibit.

Commit fc8744adc8 "Stop playing silly
games with the VM_ACCOUNT flag" changed shmem_file_setup() to set the
shmem file's VM_ACCOUNT flag according to VM_NORESERVE not being set in
the vma flags; but did so only _after_ the shmem_acct_size(flags, size)
call which is expected to pre-account a shared anonymous object.

It's all clearer if we switch shmem.c over to use VM_NORESERVE
throughout in place of !VM_ACCOUNT.

But I very nearly sent in a patch which mistakenly removed the
accounting from tmpfs files: shmem_get_inode()'s memset was good for not
setting VM_ACCOUNT, but now it needs to set VM_NORESERVE.

Rather than setting that by default, then perhaps clearing it again in
shmem_file_setup(), let's pass it as a flag to shmem_get_inode(): that
allows us to remove the #ifdef CONFIG_SHMEM from shmem_file_setup().

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-25 12:21:42 -08:00
Roel Kluin
5b5923975f [IA64] Don't go beyond iosapic_intr_info's arraysize
vi arch/ia64/kernel/iosapic.c +142
static struct iosapic_intr_info {
	...
} iosapic_intr_info[NR_IRQS];

But at line 510 we have:
	for (i = 0; i <= NR_IRQS; i++) {

s/<=/</

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2009-02-25 11:50:53 -08:00
Roel Kluin
aa2f63c954 [IA64] Do not go beyond ARRAY_SIZE of unw.hash
static struct {

... :114
        unsigned short hash[UNW_HASH_SIZE];

... :2152
	for (index = 0; index <= UNW_HASH_SIZE; ++index) {

This is a bug, isn't it?

s/<=/</

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2009-02-25 11:48:04 -08:00
Kyle McMartin
6b1ff036d4 [IA64] enable setting DMAR on by default
The previous commit which introduced the DMAR_DEFAULT_ON setting in
drivers/pci/dmar.c neglected to add the ability for ia64 to enable
the IOMMU by default. Rectify that mistake, doh!

Signed-off-by: Kyle McMartin <kyle@redhat.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2009-02-25 11:40:27 -08:00
Bartlomiej Zolnierkiewicz
8fed436841 ide: fix refcounting in device drivers
During host driver module removal del_gendisk() results in a final
put on drive->gendev and freeing the drive by drive_release_dev().

Convert device drivers from using struct kref to use struct device
so device driver's object holds reference on ->gendev and prevents
drive from prematurely going away.

Also fix ->remove methods to not erroneously drop reference on a
host driver by using only put_device() instead of ide*_put().

Reported-by: Stanislaw Gruszka <stf_xl@wp.pl>
Tested-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-02-25 20:28:24 +01:00
Bartlomiej Zolnierkiewicz
d3dd7107f4 ide-cd: document capacity hack
Just copy the comment from drivers/scsi/sr.c::sr_done()
(from which the capacity hack has been originated).

Cc: Borislav Petkov <petkovbb@gmail.com>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-02-25 20:28:23 +01:00
Bartlomiej Zolnierkiewicz
f38344b0a0 it821x: remove dead URL
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-02-25 20:28:22 +01:00
Roel Kluin
f76bee16fc atiixp: fix missing parentheses
Fix missing parentheses so PIO/DMA timings for master device on the
second channel are programmed correctly (IOW "8 0 24 16" offset values
should be used instead of the current "8 0 16 16").

[ The bug went unnoticed because after PIO/DMA timings get programmed
  incorrectly for the third device they are overwritten with timings
  for the fourth device and since BIOS should also program timings for
  the third device everything should work fine until suspend/resume
  cycle or user requested transfer mode changes. ]

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
[bart: update patch description]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-02-25 20:28:22 +01:00
Roel Kluin
43a12216d3 amd74xx: device/vendor confusion
Device and vendor ids were confused

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-02-25 20:28:22 +01:00
David Fries
0af80c04e2 ide: ide.c 'clear' fix, update "ide=nodma" documentation
Documentation/kernel-parameters.txt
- ide=nodma is no longer valid.

drivers/ide/Kconfig
- The module is ide-core.ko not ide.

drivers/ide/ide.c
- It took me a while to figure out what the arguments %d.%d:%d to nodma
  module parameter ment, so I added a comment to each.
- Added a comment to each of the sscanf lines.
- There is a bug, if j is 0 it would previously clear all the other bits
  except the current device, changed in three different places.
  mask &= (1 << i) should be mask &= ~(1 << i).

Signed-off-by: David Fries <david@fries.net>
[bart: s/disk/device/ in ide.c, beautify patch description]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-02-25 20:28:21 +01:00
Jeremy Fitzhardinge
55d8085671 xen: disable interrupts early, as start_kernel expects
This avoids a lockdep warning from:
	if (DEBUG_LOCKS_WARN_ON(unlikely(!early_boot_irqs_enabled)))
		return;
in trace_hardirqs_on_caller();

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Cc: Xen-devel <xen-devel@lists.xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 18:51:57 +01:00
Linus Torvalds
c15d8a6499 Merge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/i915: convert DRM_ERROR to DRM_DEBUG in phys object pwrite path
  drm/i915: make hw page ioremap use ioremap_wc
  drm: edid revision 0 is valid
  drm: Correct unbalanced drm_vblank_put() during mode setting.
  drm: disable encoders before re-routing them
  drm: Fix ordering of bit fields in EDID structure leading huge vsync values.
  drm: Fix shifts of EDID vsync offset/width fields.
  drm/i915: handle bogus VBT panel timing
  drm/i915: remove PLL debugging messages
2009-02-25 09:49:30 -08:00
Ingo Molnar
39854fe8c1 time: ntp: clean up second_overflow()
Impact: cleanup, no functionality changed

The 'time_adj' local variable is named in a very confusing
way because it almost shadows the 'time_adjust' global
variable - which is used in this same function.

Rename it to 'delta' - to make them stand apart more clearly.

kernel/time/ntp.o:

   text	   data	    bss	    dec	    hex	filename
   2545	    114	    144	   2803	    af3	ntp.o.before
   2545	    114	    144	   2803	    af3	ntp.o.after

md5:
   1bf0b3be564512279ba7cee299d1d2be  ntp.o.before.asm
   1bf0b3be564512279ba7cee299d1d2be  ntp.o.after.asm

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 18:38:17 +01:00
Ingo Molnar
069569e025 time: ntp: simplify ntp_tick_adj calculations
Impact: micro-optimization

Convert the (internal) ntp_tick_adj value we store from unscaled
units to scaled units. This is a constant that we never modify,
so scaling it up once during bootup is enough - we dont have to
do it for every adjustment step.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 18:38:16 +01:00
Ingo Molnar
2b9d1496e7 time: ntp: make 64-bit constants more robust
Impact: cleanup, no functionality changed

 - make PPM_SCALE an explicit s64 constant, to
   remove (s64) casts from usage sites.

kernel/time/ntp.o:

   text	   data	    bss	    dec	    hex	filename
   2536	    114	    136	   2786	    ae2	ntp.o.before
   2536	    114	    136	   2786	    ae2	ntp.o.after

md5:
   40a7728d1188aa18e83e21a81fa7b150  ntp.o.before.asm
   40a7728d1188aa18e83e21a81fa7b150  ntp.o.after.asm

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 18:38:15 +01:00
Ingo Molnar
e96291653b time: ntp: refactor do_adjtimex() some more
Impact: cleanup, no functionality changed

Further simplify do_adjtimex():

 - introduce the ntp_start_leap_timer() helper function
 - eliminate the goto adj_done complication

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 18:38:15 +01:00
Ingo Molnar
80f2257116 time: ntp: refactor do_adjtimex()
Impact: cleanup, no functionality changed

do_adjtimex() is currently a monster function with a maze of
branches. Refactor the txc->modes setting aspects of it into
two new helper functions:

	process_adj_status()
	process_adjtimex_modes()

kernel/time/ntp.o:

   text	   data	    bss	    dec	    hex	filename
   2512	    114	    136	   2762	    aca	ntp.o.before
   2512	    114	    136	   2762	    aca	ntp.o.after

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 18:38:14 +01:00
Ingo Molnar
10dd31a7a1 time: ntp: fix bug in ntp_update_offset() & do_adjtimex()
Impact: change (fix) the way the NTP PLL seconds offset is initialized/tracked

Fix a bug and do a micro-optimization:

When PLL is enabled we do not reset time_reftime. If the PLL
was off for a long time (for example after bootup), this is
arguably the wrong thing to do.

We already had a hack for the common boot-time case in
ntp_update_offset(), in form of:

	if (unlikely(time_status & STA_FREQHOLD || time_reftime == 0))
 		secs = 0;

But the update delta should be reset later on too - not just when
the PLL is enabled for the first time after bootup.

So do it on !STA_PLL -> STA_PLL transitions.

This changes behavior, as previously if ntpd was disabled for
a long time and we restarted it, we'd run from that last update,
with a very large delta.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 18:38:13 +01:00
Ingo Molnar
c7986acba2 time: ntp: micro-optimize ntp_update_offset()
Impact: cleanup, no functionality changed

The time_reftime update in ntp_update_offset() to xtime.tv_sec
is a convoluted way of saying that we want to freeze the frequency
and want the 'secs' delta to be 0. Also make this branch unlikely.

This shaves off 8 bytes from the code size:

   text	   data	    bss	    dec	    hex	filename
   2504	    114	    136	   2754	    ac2	ntp.o.before
   2496	    114	    136	   2746	    aba	ntp.o.after

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 18:38:12 +01:00
Ingo Molnar
478b7aab16 time: ntp: simplify ntp_update_offset_fll()
Impact: cleanup, no functionality changed

Change ntp_update_offset_fll() to delta logic instead of
absolute value logic. This eliminates 'freq_adj' from the
function.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 18:38:12 +01:00
Ingo Molnar
f939890b66 time: ntp: refactor and clean up ntp_update_offset()
Impact: cleanup, no functionality changed

- introduce the ntp_update_offset_fll() helper
- clean up the flow and variable naming

kernel/time/ntp.o:

   text	   data	    bss	    dec	    hex	filename
   2504	    114	    136	   2754	    ac2	ntp.o.before
   2504	    114	    136	   2754	    ac2	ntp.o.after

md5:
   01f7b8e1a5472a3056f9e4ae84d46315  ntp.o.before.asm
   01f7b8e1a5472a3056f9e4ae84d46315  ntp.o.after.asm

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 18:38:11 +01:00
Ingo Molnar
bc26c31d44 time: ntp: refactor up ntp_update_frequency()
Impact: cleanup, no functionality changed

Change ntp_update_frequency() from a hard to follow code
flow that uses global variables as temporaries, to a clean
input+output flow.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 18:38:10 +01:00
Ingo Molnar
9ce616aaef time: ntp: clean up ntp_update_frequency()
Impact: cleanup, no functionality changed

Prepare a refactoring of ntp_update_frequency().

kernel/time/ntp.o:

   text	   data	    bss	    dec	    hex	filename
   2504	    114	    136	   2754	    ac2	ntp.o.before
   2504	    114	    136	   2754	    ac2	ntp.o.after

md5:
   41f3009debc9b397d7394dd77d912f0a  ntp.o.before.asm
   41f3009debc9b397d7394dd77d912f0a  ntp.o.after.asm

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 18:38:09 +01:00
Ingo Molnar
bbd1267690 time: ntp: simplify the MAX_TICKADJ_SCALED definition
Impact: cleanup, no functionality changed

There's an ugly u64 typecase in the MAX_TICKADJ_SCALED definition,
this can be eliminated by making the MAX_TICKADJ constant's type
64-bit (signed).

kernel/time/ntp.o:

   text	   data	    bss	    dec	    hex	filename
   2504	    114	    136	   2754	    ac2	ntp.o.before
   2504	    114	    136	   2754	    ac2	ntp.o.after

md5:
   41f3009debc9b397d7394dd77d912f0a  ntp.o.before.asm
   41f3009debc9b397d7394dd77d912f0a  ntp.o.after.asm

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 18:38:08 +01:00
Ingo Molnar
3c972c2444 time: ntp: simplify the second_overflow() code flow
Impact: cleanup, no functionality changed

Instead of a hierarchy of conditions, transform them to clean
gradual conditions and return's.

This makes the flow easier to read and makes the purpose of
the function easier to understand.

kernel/time/ntp.o:

   text	   data	    bss	    dec	    hex	filename
   2552	    170	    168	   2890	    b4a	ntp.o.before
   2552	    170	    168	   2890	    b4a	ntp.o.after

md5:
   eae1275df0b7d6290c13f6f6f8f05c8c  ntp.o.before.asm
   eae1275df0b7d6290c13f6f6f8f05c8c  ntp.o.after.asm

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 18:38:07 +01:00
Ingo Molnar
53bbfa9e94 time: ntp: clean up kernel/time/ntp.c
Impact: cleanup, no functionality changed

Make this file a bit more readable by applying a consistent coding style.

No code changed:

kernel/time/ntp.o:

   text	   data	    bss	    dec	    hex	filename
   2552	    170	    168	   2890	    b4a	ntp.o.before
   2552	    170	    168	   2890	    b4a	ntp.o.after

md5:
   eae1275df0b7d6290c13f6f6f8f05c8c  ntp.o.before.asm
   eae1275df0b7d6290c13f6f6f8f05c8c  ntp.o.after.asm

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 18:38:06 +01:00
Linus Torvalds
490213556a Merge branch 'for-linus' of git://neil.brown.name/md
* 'for-linus' of git://neil.brown.name/md:
  md: avoid races when stopping resync.
  md/raid10:  Don't call bitmap_cond_end_sync when we are doing recovery.
  md/raid10:  Don't skip more than 1 bitmap-chunk at a time during recovery.
2009-02-25 09:34:27 -08:00
Linus Torvalds
f8dacde8c0 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc64: Fix crashes in jbusmc_print_dimm()
2009-02-25 09:31:56 -08:00
Linus Torvalds
60042600c5 Merge git://git.infradead.org/iommu-2.6
* git://git.infradead.org/iommu-2.6:
  intel-iommu: fix endless "Unknown DMAR structure type" loop
  VT-d: handle Invalidation Queue Error to avoid system hang
  intel-iommu: fix build error with INTR_REMAP=y and DMAR=n
2009-02-25 09:31:21 -08:00
Fenghua Yu
6aa03ab069 Fix iwlan DMA mapping direction
When iwlan runs on IOMMU, IOMMU generates a lot of PTE write faults
because PTE write bit is not set on some of PTE's.  This is because
iwlan driver calls DMA mapping with PCI_DMA_TODEVICE which is read only
in mapping PTE.  But iwlan device actually writes to the mapped page to
update its contents.  This issue is not exposed in swiotlb.  But VT-d
hardware can capture this fault and stop the fault transaction.

The following patch fixes the issue.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Bhavesh Davda <bhavesh@vmware.com>
Tested-by: Chris Wright <chrisw@sous-sol.org>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-25 09:30:56 -08:00
Takashi Iwai
873dc78a86 ALSA: hda - Clean up / fix quirks for HP laptops with AD1984A
Use SND_PCI_QUIRK_MASK() to clean up / support better HP laptops with
AD1984A codec.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-25 18:12:13 +01:00
Ingo Molnar
0b13fda1e0 generic-ipi: cleanups
Andrew pointed out that there's some small amount of
style rot in kernel/smp.c.

Clean it up.

Reported-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 16:52:50 +01:00
Ingo Molnar
2e31add2a7 Merge branch 'x86/urgent' into x86/pat 2009-02-25 16:40:10 +01:00
Peter Zijlstra
34754b69a6 x86: make vmap yell louder when it is used under irqs_disabled()
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 16:38:34 +01:00
Ingo Molnar
d2b0261506 alloc_percpu: fix UP build
Impact: build fix

the !SMP branch had a 'gfp' leftover:

 include/linux/percpu.h: In function '__alloc_percpu':
 include/linux/percpu.h:160: error: 'gfp' undeclared (first use in this function)
 include/linux/percpu.h:160: error: (Each undeclared identifier is reported only once
 include/linux/percpu.h:160: error: for each function it appears in.)

Use GFP_KERNEL like the SMP version does.

Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 14:38:12 +01:00
Peter Zijlstra
6e2756376c generic-ipi: remove CSD_FLAG_WAIT
Oleg noticed that we don't strictly need CSD_FLAG_WAIT, rework
the code so that we can use CSD_FLAG_LOCK for both purposes.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 14:13:44 +01:00
Peter Zijlstra
8969a5ede0 generic-ipi: remove kmalloc()
Remove the use of kmalloc() from the smp_call_function_*()
calls.

Steven's generic-ipi patch (d7240b98: generic-ipi: use per cpu
data for single cpu ipi calls) started the discussion on the use
of kmalloc() in this code and fixed the
smp_call_function_single(.wait=0) fallback case.

In this patch we complete this by also providing means for the
_many() call, which fully removes the need for kmalloc() in this
code.

The problem with the _many() call is that other cpus might still
be observing our entry when we're done with it. It solved this
by dynamically allocating data elements and RCU-freeing it.

We solve it by using a single per-cpu entry which provides
static storage and solves one half of the problem (avoiding
referencing freed data).

The other half, ensuring the queue iteration it still possible,
is done by placing re-used entries at the head of the list. This
means that if someone was still iterating that entry when it got
moved, he will now re-visit the entries on the list he had
already seen, but avoids skipping over entries like would have
happened had we placed the new entry at the end.

Furthermore, visiting entries twice is not a problem, since we
remove our cpu from the entry's cpumask once its called.

Many thanks to Oleg for his suggestions and him poking holes in
my earlier attempts.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 14:13:43 +01:00
Ingo Molnar
0dcec8c27b alloc_percpu: add align argument to __alloc_percpu, fix
Impact: build fix

API was changed, but not all usage sites were converted:

 net/ipv4/route.c: In function ‘ip_rt_init’:
 net/ipv4/route.c:3379: error: too few arguments to function ‘__alloc_percpu’

Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 14:09:41 +01:00
Frederic Weisbecker
d7350c3f45 tracing/core: make the read callbacks reentrants
Now that several per-cpu files can be read or spliced at the
same, we want the read/splice callbacks for tracing files to be
reentrants.

Until now, a single global mutex (trace_types_lock) serialized
the access to tracing_read_pipe(), tracing_splice_read_pipe(),
and the seq helpers.

Ie: it means that if a user tries to read trace_pipe0 and
trace_pipe1 at the same time, the access to the function
tracing_read_pipe() is contended and one reader must wait for
the other to finish its read call.

The trace_type_lock mutex is mostly here to serialize the access
to the global current tracer (current_trace), which can be
changed concurrently. Although the iter struct keeps a private
pointer to this tracer, its callbacks can be changed by another
function.

The method used here is to not keep anymore private reference to
the tracer inside the iterator but to make a copy of it inside
the iterator. Then it checks on subsequents read calls if the
tracer has changed. This is not costly because the current
tracer is not expected to be changed often, so we use a branch
prediction for that.

Moreover, we add a private mutex to the iterator (there is one
iterator per file descriptor) to serialize the accesses in case
of multiple consumers per file descriptor (which would be a
silly idea from the user). Note that this is not to protect the
ring buffer, since the ring buffer already serializes the
readers accesses. This is to prevent from traces weirdness in
case of concurrent consumers. But these mutexes can be dropped
anyway, that would not result in any crash. Just tell me what
you think about it.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 13:40:58 +01:00
Frederic Weisbecker
b04cc6b1f6 tracing/core: introduce per cpu tracing files
Impact: split up tracing output per cpu

Currently, on the tracing debugfs directory, three files are
available to the user to let him extracting the trace output:

- trace is an iterator through the ring-buffer. It's a reader
  but not a consumer It doesn't block when no more traces are
  available.

- trace pretty similar to the former, except that it adds more
  informations such as prempt count, irq flag, ...

- trace_pipe is a reader and a consumer, it will also block
  waiting for traces if necessary (heh, yes it's a pipe).

The traces coming from different cpus are curretly mixed up
inside these files. Sometimes it messes up the informations,
sometimes it's useful, depending on what does the tracer
capture.

The tracing_cpumask file is useful to filter the output and
select only the traces captured a custom defined set of cpus.
But still it is not enough powerful to extract at the same time
one trace buffer per cpu.

So this patch creates a new directory: /debug/tracing/per_cpu/.

Inside this directory, you will now find one trace_pipe file and
one trace file per cpu.

Which means if you have two cpus, you will have:

 trace0
 trace1
 trace_pipe0
 trace_pipe1

And of course, reading these files will have the same effect
than with the usual tracing files, except that you will only see
the traces from the given cpu.

The original all-in-one cpu trace file are still available on
their original place.

Until now, only one consumer was allowed on trace_pipe to avoid
racy consuming on the ring-buffer. Now the approach changed a
bit, you can have only one consumer per cpu.

Which means you are allowed to read concurrently trace_pipe0 and
trace_pipe1 But you can't have two readers on trace_pipe0 or
trace_pipe1.

Following the same logic, if there is one reader on the common
trace_pipe, you can not have at the same time another reader on
trace_pipe0 or in trace_pipe1. Because in trace_pipe is already
a consumer in all cpu buffers in essence.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 13:40:58 +01:00
Venkatesh Pallipadi
17581ad812 gpu/drm, x86, PAT: PAT support for io_mapping_*
Make io_mapping_create_wc and io_mapping_free go through PAT to make sure
that there are no memory type aliases.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Eric Anholt <eric@anholt.net>
Cc: Keith Packard <keithp@keithp.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 13:09:52 +01:00
Venkatesh Pallipadi
4ab0d47d0a gpu/drm, x86, PAT: io_mapping_create_wc and resource_size_t
io_mapping_create_wc should take a resource_size_t parameter in place of
unsigned long. With unsigned long, there will be no way to map greater than 4GB
address in i386/32 bit.

On x86, greater than 4GB addresses cannot be mapped on i386 without PAE. Return
error for such a case.

Patch also adds a structure for io_mapping, that saves the base, size and
type on HAVE_ATOMIC_IOMAP archs, that can be used to verify the offset on
io_mapping_map calls.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Eric Anholt <eric@anholt.net>
Cc: Keith Packard <keithp@keithp.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 13:09:51 +01:00
Venkatesh Pallipadi
7880f74645 gpu/drm, x86, PAT: routine to keep identity map in sync
Add a function to check and keep identity maps in sync, when changing
any memory type. One of the follow on patches will also use this
routine.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Eric Anholt <eric@anholt.net>
Cc: Keith Packard <keithp@keithp.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 13:09:51 +01:00
Venkatesh Pallipadi
6644107d57 gpu/drm, x86, PAT: Handle io_mapping_create_wc() errors in a clean way
io_mapping_create_wc can return NULL on error and io_mapping_free() should be
called on one of the error-cleanup path.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Eric Anholt <eric@anholt.net>
Cc: Keith Packard <keithp@keithp.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 13:09:50 +01:00
Ingo Molnar
2b1b858f69 Merge branch 'tip/tracing/ftrace' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into tracing/ftrace 2009-02-25 12:50:07 +01:00
Nick Piggin
15d0d3b337 generic IPI: simplify barriers and locking
Simplify the barriers in generic remote function call interrupt
code.

Firstly, just unconditionally take the lock and check the list
in the generic_call_function_single_interrupt IPI handler. As
we've just taken an IPI here, the chances are fairly high that
there will be work on the list for us, so do the locking
unconditionally. This removes the tricky lockless list_empty
check and dubious barriers. The change looks bigger than it is
because it is just removing an outer loop.

Secondly, clarify architecture specific IPI locking rules.
Generic code has no tools to impose any sane ordering on IPIs if
they go outside normal cache coherency, ergo the arch code must
make them appear to obey cache coherency as a "memory operation"
to initiate an IPI, and a "memory operation" to receive one.
This way at least they can be reasoned about in generic code,
and smp_mb used to provide ordering.

The combination of these two changes means that explict barriers
can be taken out of queue handling for the single case -- shared
data is explicitly locked, and ipi ordering must conform to
that, so no barriers needed. An extra barrier is needed in the
many handler, so as to ensure we load the list element after the
IPI is received.

Does any architecture actually *need* these barriers? For the
initiator I could see it, but for the handler I would be
surprised. So the other thing we could do for simplicity is just
to require that, rather than just matching with cache coherency,
we just require a full barrier before generating an IPI, and
after receiving an IPI. In which case, the smp_mb()s can go
away. But just for now, we'll be on the safe side and use the
barriers (they're in the slow case anyway).

Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: linux-arch@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 12:27:08 +01:00
Andreas Herrmann
63823126c2 x86: memtest: add additional (regular) test patterns
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 12:19:47 +01:00
Andreas Herrmann
9e5f6cf5f7 x86: update description for memtest boot parameter
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 12:19:47 +01:00