Commit graph

9,239 commits

Author SHA1 Message Date
Jorge Marques
048a15b721 iio: accel: Change adxl345 depend to negate adxl35x
Change 'depends on INPUT_ADXL34X=n' to '!(INPUT_ADXL34X)' to allow both
drivers to be compiled as modules. The user then can use the blacklist
to block loading one.

Signed-off-by: Jorge Marques <jorge.marques@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-12-21 11:41:12 +00:00
David Jander
4aa91223fd iio: adc: Add TI ADS131M0x ADC driver
Add a new IIO ADC driver for Texas Instruments ADS131M0x devices
(ADS131M02/03/04/06/08). These are 24-bit, up to 64 kSPS, simultaneous-
sampling delta-sigma ADCs accessed via SPI.

Highlights:
- Supports 2/3/4/6/8-channel variants with per-channel RAW and SCALE.
- Implements device-required full-duplex fixed-frame transfers.
- Handles both input and output CRC

Note: Despite the almost identical name, this hardware is not
compatible with the ADS131E0x series handled by
drivers/iio/adc/ti-ads131e08.c.

Signed-off-by: David Jander <david@protonic.nl>
Co-developed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-12-21 11:41:12 +00:00
Massimiliano Pellizzer
3624f03862 iio: imu: smi330: remove redundant assignment in smi330_read_avail
In the IIO_CHAN_INFO_OVERSAMPLING_RATIO case, the type parameter
is assigned from smi330_average_attr.type and then immediately
overwritten with IIO_VAL_INT on the next line.

Since smi330_average_attr.type is already initialized to IIO_VAL_INT,
the second assignment is redundant. Remove the hardcoded assignment
to maintain consistency in the code.

Signed-off-by: Massimiliano Pellizzer <mpellizzer.dev@gmail.com>
Reviewed-by: Jianping Shen <Jianping.Shen@de.bosch.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-12-21 11:41:12 +00:00
Tomas Borquez
5a306a64bf iio: light: isl29018: replace sprintf() with safer alternatives
This patch replaces sprintf() with sysfs_emit() and sysfs_emit_at() safer
alternative with no functional changes.

Signed-off-by: Tomas Borquez <tomasborquez13@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-12-21 11:41:12 +00:00
Francesco Lavra
ce40e01d7c iio: imu: st_lsm6dsx: add tap event detection
In order to allow sensors to advertise tap event capability and report tap
events, define a new struct iio_event_spec array that includes a tap event
spec, and a new struct iio_chan_spec array that references the new
iio_event_spec array; for the LSM6DSV chip family, use the new
iio_chan_spec array and define an event source for tap events.
Tested on LSMDSV16X.

Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-12-21 11:41:11 +00:00
Francesco Lavra
317c9bef82 iio: imu: st_lsm6dsx: add event spec parameter to iio_chan_spec initializer
In preparation for adding support for more event sources, add to the
ST_LSM6DSX_CHANNEL_ACC() iio_chan_spec initializer macro an iio_event_spec
array argument, so that this macro can be used with different arrays by
sensors that support different event sources; change the st_lsm6dsx_event
struct declaration to an array (renamed as st_lsm6dsx_ev_motion) so that it
can be passed to the macro (and opportunistically move it from the header
file where it does not belong to the C file where it is used).
In addition, remove from this macro the channel type parameter and
hard-code IIO_ACCEL in the macro definition, since all callers use
IIO_ACCEL as channel type argument.

Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-12-21 11:41:09 +00:00
Francesco Lavra
855119fa0a iio: imu: st_lsm6dsx: add event configurability on a per axis basis
In order to be able to configure event detection on a per axis
basis (for either setting an event threshold/sensitivity value, or
enabling/disabling event detection), add new axis-specific fields
to struct st_lsm6dsx_event_src, and modify the logic that handles
event configuration to properly handle axis-specific settings when
supported by a given event source.
A future commit will add actual event sources with per-axis
configurability.

Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-12-21 11:10:26 +00:00
Francesco Lavra
c93e8f091b iio: imu: st_lsm6dsx: make event management functions generic
In preparation for adding support for more event types, use an array
indexed by event ID instead of a scalar value to store enabled events, and
refactor the functions to configure and report events so that their
implementation is not specific for wakeup events. Move the logic to update
the global event interrupt enable flag from st_lsm6dsx_event_setup() to its
calling function, so that it can take into account also event sources
different from the source being configured. While changing the signature of
the st_lsm6dsx_event_setup() function, opportunistically add the currently
unused `axis` parameter, which will be used when adding support for
enabling and disabling events on a per axis basis.

Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-12-21 11:10:26 +00:00
Francesco Lavra
b008b1ff0c iio: imu: st_lsm6dsx: remove event_threshold field from hw struct
This field is used to store the wakeup event detection threshold value.
When adding support for more event types, some of which may have different
threshold values for different axes, storing all threshold values for all
event sources would be cumbersome. Thus, remove this field altogether, and
read the currently configured value from the sensor when requested by
userspace.

Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-12-21 11:10:26 +00:00
Francesco Lavra
da6279f758 iio: imu: st_lsm6dsx: rework code to check for enabled events
The enable_event field in struct st_lsm6dsx_hw does not lend itself well to
handling multiple event sources, so it will have to be modified to add
support for more event sources. As a preparatory step, remove references to
this field from code that does not deal with event management; rework the
st_lsm6dsx_check_events() function so that it returns whether any events
are currently enabled on a given sensor.

Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-12-21 11:10:26 +00:00
Francesco Lavra
87c3e0c138 iio: imu: st_lsm6dsx: move wakeup event enable mask to event_src
The mask value being assigned to the irq1_func and irq2_func fields of the
irq_config struct is specific to a single event source (i.e. the wakeup
event), and as such it should be separate from the definition of the
interrupt function registers, which cover multiple event sources.
In preparation for adding support for more event types, change the
irq1_func and irq2_func type from an {address, mask} pair to an address,
and move the mask value to a new field of struct st_lsm6dsx_event_src. No
functional changes.

Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-12-21 11:10:26 +00:00
Francesco Lavra
212234f7bf iio: imu: st_lsm6dsx: make event_settings more generic
The st_lsm6dsx_event_settings structure contains fields specific for one
event type (wakeup). In preparation for adding support for more event
types, introduce an event id enum and a generic event source structure, and
replace wakeup-specific data in struct st_lsm6dsx_event_settings with an
array of event source structures.

Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-12-21 11:10:26 +00:00
Tomas Melin
0820dd9f51 iio: adc: ad9467: support write/read offset via _calibbias
Support configuring output calibration value. Among the devices
currently supported by this driver, this setting is specific to
ad9434. The offset can be used to calibrate the output against
a known input. The register is called offset, but the procedure
is best mapped internally with calibbias operation.

Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Tomas Melin <tomas.melin@vaisala.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-12-21 11:10:26 +00:00
Linus Torvalds
83bd89291f Char/Misc/IIO driver updates for 6.19-rc1
Here is the big set of char/misc/iio driver updates for 6.19-rc1.  Lots
 of stuff in here including:
   - lots of IIO driver updates, cleanups, and additions.
   - large interconnect driver changes as they get converted over to a
     dynamic system of ids
   - coresight driver updates
   - mwave driver updates
   - binder driver updates and changes
   - comedi driver fixes now that the fuzzers are being set loose on them
   - nvmem driver updates
   - new uio driver addition
   - lots of other small char/misc driver updates, full details in the
     shortlog
 
 All of these have been in linux-next for a while now, with no reported
 issues other than a merge conflict with your tree that should be trivial
 to handle (take both sides).
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaTTNDQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykVIACeN0AiTosAtp4CAGe4fAwM7EvbnkQAoNJE5NAx
 Ef31/j1Tq2pCTWt6SVbs
 =AY/e
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc/IIO driver updates from Greg KH:
 "Here is the big set of char/misc/iio driver updates for 6.19-rc1. Lots
  of stuff in here including:

   - lots of IIO driver updates, cleanups, and additions

   - large interconnect driver changes as they get converted over to a
     dynamic system of ids

   - coresight driver updates

   - mwave driver updates

   - binder driver updates and changes

   - comedi driver fixes now that the fuzzers are being set loose on
     them

   - nvmem driver updates

   - new uio driver addition

   - lots of other small char/misc driver updates, full details in the
     shortlog

  All of these have been in linux-next for a while now"

* tag 'char-misc-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (304 commits)
  char: applicom: fix NULL pointer dereference in ac_ioctl
  hangcheck-timer: fix coding style spacing
  hangcheck-timer: Replace %Ld with %lld
  hangcheck-timer: replace printk(KERN_CRIT) with pr_crit
  uio: Add SVA support for PCI devices via uio_pci_generic_sva.c
  dt-bindings: slimbus: fix warning from example
  intel_th: Fix error handling in intel_th_output_open
  misc: rp1: Fix an error handling path in rp1_probe()
  char: xillybus: add WQ_UNBOUND to alloc_workqueue users
  misc: bh1770glc: use pm_runtime_resume_and_get() in power_state_store
  misc: cb710: Fix a NULL vs IS_ERR() check in probe()
  mux: mmio: Add suspend and resume support
  virt: acrn: split acrn_mmio_dev_res out of acrn_mmiodev
  greybus: gb-beagleplay: Fix timeout handling in bootloader functions
  greybus: add WQ_PERCPU to alloc_workqueue users
  char/mwave: drop typedefs
  char/mwave: drop printk wrapper
  char/mwave: remove printk tracing
  char/mwave: remove unneeded fops
  char/mwave: remove MWAVE_FUTZ_WITH_OTHER_DEVICES ifdeffery
  ...
2025-12-06 18:34:24 -08:00
Linus Torvalds
f468cf53c5 bitmap updates for v6.19
- Runtime field_{get,prep}() (Geert);
  - Rust ID pool updates (Alice);
  - min_t() simplification (David);
  - __sw_hweightN kernel-doc fixes (Andy);
  - cpumask.h headers cleanup (Andy).
 -----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEEi8GdvG6xMhdgpu/4sUSA/TofvsgFAmkxsKkACgkQsUSA/Tof
 vshxxgv+Ly1WkW65Sr3KmzY0lCFBg+oH+1uc9Y6avc3gciY1nEwHEP0mqjOVuGRd
 HRkxhBKQlZe+GEp09IeCzONhhcAe9VnftD4isIrLlqjlcavs9gWaQRU38lCvfj79
 HPVOOe3zy1TlBFqLfcc+cZWDBG9BMGCZycI1+dZMYzGZ3SUwpdGjNIfFNOC0x0Jg
 7u+nVqduzH155kBSaPUH2FhhC9SjmgW429EBpksKs0POcOiijdLesezksDP+5bfr
 9YyAuP1MZ+bWpMS5S0h/Mw9M/X9eB0ZhY0ahkHV8XFhv/8Wo/gYO98yBb5v8bxa9
 9F3D8FFMfYDmMzmFXlUVH7mNbe3fAtbQq/XQKzjGbe2jZM+3A3YNfCXpBASLsZLt
 p3G31cZRRtuDz4hlEiJeQuF0VB3sN7ycfT53dLIyjl9IMLBk4ArhXSPasN7wHa3Y
 VO5UYCQAOBAu9Kou+ThHDPJz0aBI9GtfwvqJTzgvXa0elZ+Iid6DfeqOSzmHyUOd
 A0qHDI/O
 =EM4O
 -----END PGP SIGNATURE-----

Merge tag 'bitmap-for-6.19' of github.com:/norov/linux

Pull bitmap updates from Yury Norov:

 - Runtime field_{get,prep}() (Geert)

 - Rust ID pool updates (Alice)

 - min_t() simplification (David)

 - __sw_hweightN kernel-doc fixes (Andy)

 - cpumask.h headers cleanup (Andy)

* tag 'bitmap-for-6.19' of github.com:/norov/linux: (32 commits)
  rust_binder: use bitmap for allocation of handles
  rust: id_pool: do not immediately acquire new ids
  rust: id_pool: do not supply starting capacity
  rust: id_pool: rename IdPool::new() to with_capacity()
  rust: bitmap: add BitmapVec::new_inline()
  rust: bitmap: add MAX_LEN and MAX_INLINE_LEN constants
  cpumask: Don't use "proxy" headers
  soc: renesas: Use bitfield helpers
  clk: renesas: Use bitfield helpers
  ALSA: usb-audio: Convert to common field_{get,prep}() helpers
  soc: renesas: rz-sysc: Convert to common field_get() helper
  pinctrl: ma35: Convert to common field_{get,prep}() helpers
  iio: mlx90614: Convert to common field_{get,prep}() helpers
  iio: dac: Convert to common field_prep() helper
  gpio: aspeed: Convert to common field_{get,prep}() helpers
  EDAC/ie31200: Convert to common field_get() helper
  crypto: qat - convert to common field_get() helper
  clk: at91: Convert to common field_{get,prep}() helpers
  bitfield: Add non-constant field_{prep,get}() helpers
  bitfield: Add less-checking __FIELD_{GET,PREP}()
  ...
2025-12-06 09:01:27 -08:00
Geert Uytterhoeven
1fe1c28a10 iio: mlx90614: Convert to common field_{get,prep}() helpers
Drop the driver-specific field_get() and field_prep() macros, in favor
of the globally available variants from <linux/bitfield.h>.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Crt Mori <cmo@melexis.com>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
2025-11-24 14:15:47 -05:00
Geert Uytterhoeven
54bfd90ca3 iio: dac: Convert to common field_prep() helper
Drop the driver-specific field_prep() macro, in favor of the globally
available variant from <linux/bitfield.h>.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
2025-11-24 14:15:47 -05:00
Geert Uytterhoeven
8a838dabf1 iio: mlx90614: #undef field_{get,prep}() before local definition
Prepare for the advent of globally available common field_get() and
field_prep() macros by undefining the symbols before defining local
variants.  This prevents redefinition warnings from the C preprocessor
when introducing the common macros later.

Suggested-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
2025-11-24 14:15:46 -05:00
Geert Uytterhoeven
27856d2b2b iio: dac: ad3530r: #undef field_prep() before local definition
Prepare for the advent of a globally available common field_prep() macro
by undefining the symbol before defining a local variant.  This prevents
redefinition warnings from the C preprocessor when introducing the common
macro later.

Suggested-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
2025-11-24 14:15:46 -05:00
Akhilesh Patil
02d44a1b64 iio: pressure: Arrange Makefile alphabetically
Fix hp206c and st_pressure_* entries in pressure Makefiles to follow
alphabetical order as per guideline mentioned in iio/pressure/Makefile.

Signed-off-by: Akhilesh Patil <akhilesh@ee.iitb.ac.in>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-11-16 15:22:16 +00:00
Antoni Pokusinski
6062cd20cb iio: mpl3115: add threshold events support
Add support for pressure and temperature rising threshold events. For
both channels *_en and *_value (in raw units) attributes are exposed.

Since in write_event_config() the ctrl_reg1.active and ctrl_reg4
are modified, accessing the data->ctrl_reg{1,4} in set_trigger_state()
and write_event_config() needs to be now guarded by data->lock.
Otherwise, it would be possible that 2 concurrent threads executing
these functions would access the data->ctrl_reg{1,4} at the same time
and then one would overwrite the other's result.

Signed-off-by: Antoni Pokusinski <apokusinski01@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-11-15 18:06:47 +00:00
Antoni Pokusinski
47e4b1ca44 iio: mpl3115: use get_unaligned_be24() to retrieve pressure data
The pressure measurement result is arranged as 20-bit unsigned value
residing in three 8-bit registers. Hence, it can be retrieved using
get_unaligned_be24() and by applying 4-bit shift.

Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Signed-off-by: Antoni Pokusinski <apokusinski01@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-11-15 18:06:47 +00:00
Liang Jie
0de73abe5f iio: buffer: use dma_buf_unmap_attachment_unlocked() helper
Replace open-coded dma_resv_lock()/dma_resv_unlock() around
dma_buf_unmap_attachment() in iio_buffer_dmabuf_release() with the
dma_buf_unmap_attachment_unlocked() helper.

This aligns with the standard DMA-BUF API, avoids duplicating
locking logic and eases future maintenance. No functional change.

Reviewed-by: fanggeng <fanggeng@lixiang.com>
Signed-off-by: Liang Jie <liangjie@lixiang.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-11-15 17:31:31 +00:00
Andy Shevchenko
c76ba4b264 iio: core: Replace lockdep_set_class() + mutex_init() by combined call
Replace lockdep_set_class() + mutex_init() by combined call
mutex_init_with_key().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-11-15 17:28:02 +00:00
Andy Shevchenko
b0e6871415 iio: core: Clean up device correctly on iio_device_alloc() failure
Once we called device_initialize() we have to call put_device()
on it. Refactor the code to make it in the right order.

Fixes: fe6f45f6ba ("iio: core: check return value when calling dev_set_name()")
Fixes: 847ec80bba ("Staging: IIO: core support for device registration and management")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-11-15 17:28:02 +00:00
Andy Shevchenko
f5d203467a iio: core: add missing mutex_destroy in iio_dev_release()
Add missing mutex_destroy() call in iio_dev_release() to properly
clean up the mutex initialized in iio_device_alloc(). Ensure proper
resource cleanup and follows kernel practices.

Found by code review.

While at it, create a lockdep key before mutex initialisation.
This will help with converting it to the better API in the future.

Fixes: 847ec80bba ("Staging: IIO: core support for device registration and management")
Fixes: ac917a8111 ("staging:iio:core set the iio_dev.info pointer to null on unregister under lock.")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-11-15 17:28:02 +00:00
Jonathan Santos
0ecad19643 iio: accel: adxl380: add support for ADXL318 and ADXL319
The ADXL318 and ADXL319 are low noise density, low power, 3-axis
accelerometers based on ADXL380 and ADXL382, respectively. The main
difference between the new parts and the existing ones are the absence
of interrupts and events like tap detection, activity/inactivity, and
free-fall detection.

Other differences in the new parts are fewer power modes, basically
allowing only idle and measurement modes, and the removal of the 12-bit
SAR ADC path for the 3-axis signals (known as lower signal chain),
being excluisive for the temperature sensor in the ADXL318/319.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-11-15 17:11:35 +00:00
Linus Walleij
3aa385a9c7 iio: accel: bmc150: Fix irq assumption regression
The code in bmc150-accel-core.c unconditionally calls
bmc150_accel_set_interrupt() in the iio_buffer_setup_ops,
such as on the runtime PM resume path giving a kernel
splat like this if the device has no interrupts:

Unable to handle kernel NULL pointer dereference at virtual
  address 00000001 when read

PC is at bmc150_accel_set_interrupt+0x98/0x194
LR is at __pm_runtime_resume+0x5c/0x64
(...)
Call trace:
bmc150_accel_set_interrupt from bmc150_accel_buffer_postenable+0x40/0x108
bmc150_accel_buffer_postenable from __iio_update_buffers+0xbe0/0xcbc
__iio_update_buffers from enable_store+0x84/0xc8
enable_store from kernfs_fop_write_iter+0x154/0x1b4

This bug seems to have been in the driver since the beginning,
but it only manifests recently, I do not know why.

Store the IRQ number in the state struct, as this is a common
pattern in other drivers, then use this to determine if we have
IRQ support or not.

Cc: stable@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-11-11 20:22:23 +00:00
Remi Buisson
d16d1c2553 iio: imu: inv_icm45600: Initializes inv_icm45600_buffer_postdisable() sleep
The sleep variable in inv_icm45600_buffer_postdisable() could be used without
being assigned in case of error. It must be initialized to 0 by default.

Fixes: 06674a72cf ("iio: imu: inv_icm45600: add buffer support in iio devices")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-iio/aPi6Xw-ZoUkW76zR@stanley.mountain/
Signed-off-by: Remi Buisson <remi.buisson@tdk.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-11-09 16:52:52 +00:00
Marco Crivellari
9eb98a05f0 iio: adc: pac1934: replace use of system_wq with system_percpu_wq
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.

This lack of consistency cannot be addressed without refactoring the API.

This patch continues the effort to refactor worqueue APIs, which has begun
with the change introducing new workqueues and a new alloc_workqueue flag:

commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")

system_percpu_wq replaced system_wq, so change the wq in iio/adc/pac1934.

The old wq (system_wq) will be kept for a few release cycles.

Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-11-09 16:46:13 +00:00
Michael Hennerich
826ccaecbe iio: dac: ad5446: Add AD5542 to the spi id table
This adds support for the AD5542 single channel Current Source and
Voltage Output DACs.

It is similar to the AD5542A model so just use the same id.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Co-developed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-11-09 16:32:29 +00:00
Nuno Sá
8265cc284d iio: dac: ad5446: Fix coding style issues
Fix style issues as reported by checkpatch.

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-11-09 16:31:22 +00:00
Nuno Sá
bb5565a986 iio: dac: ad5446: Refactor header inclusion
Make sure include files are given in alphabetical order and that we include
the ones that were missing and remove the ones we don't really use.

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-11-09 16:30:47 +00:00
Nuno Sá
308d4474cf iio: dac: ad5446: Make use of the cleanup helpers
Use the auto unlocking helpers from cleanup.h. Allows for some code
simplification.

While at it, don't use the ternary operator in
ad5446_write_dac_powerdown() and add an helper function to write the DAC
code. The reason for the function was purely to avoid having to use
unreachable().

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-11-09 16:18:01 +00:00
Nuno Sá
6e43c10675 iio: dac: ad5446: Make use of devm_mutex_init()
Use devm_mutex_init() which is helpful with CONFIG_DEBUG_MUTEXES.

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-11-09 16:16:29 +00:00
Nuno Sá
876d940240 iio: dac: ad5446: Separate I2C/SPI into different drivers
Properly separate the I2C and SPI drivers into two different drivers
living in their own source file (as usual). So that no need for the
hacky ifdefery.

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-11-09 16:15:13 +00:00
Nuno Sá
5b622340bf iio: dac: ad5456: Add missing DT compatibles
Add missing of_device_id compatibles for the i2c and spi drivers.

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-11-09 16:06:54 +00:00
Nuno Sá
45d510a720 iio: dac: ad5446: Move to single chip_info structures
Do not use an array with an enum id kind of thing. Use the more
maintainable chip_info variable per chip.

Adapt the probe functions to use the proper helpers (for SPI and I2c).
Note that in a following patch we'll also add the chip_info variables to
the of_device_id tables. Hence already use the helpers that internally use
device_get_match_data().

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-11-09 16:06:10 +00:00
Nuno Sá
14b72d8ace iio: dac: ad5446: Don't ignore missing regulator
If the chip does not have an internal reference, do not ignore a missing
regulator as we won't be able to actually provide a proper scale for the
DAC. Since it's now seen as an error, flip the if() logic so errors are
treated first (which is the typical pattern).

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-11-09 16:04:52 +00:00
Nuno Sá
63232c9b54 iio: dac: ad5446: Drop duplicated spi_id entry
AD5600 and AD5541A are compatible so there's no need to have a dedicated
entry for ID_AD5600.

Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-11-09 16:03:45 +00:00
Nuno Sá
86c341d796 iio: dac: ad5446: Use DMA safe buffer for transfers
Make sure to use DMA safe buffer. While for i2c we could be fine without
them, we need it for spi anyways.

As we now have DMA safe buffers, use i2c_master_send_dmasafe().

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-11-09 16:03:45 +00:00
Herve Codina (Schneider Electric)
2387a7d6e5 iio: adc: Add support for the Renesas RZ/N1 ADC
The Renesas RZ/N1 ADC controller is the ADC controller available in the
Renesas RZ/N1 SoCs family. It can use up to two internal ADC cores (ADC1
and ADC2) those internal cores are not directly accessed but are handled
through ADC controller virtual channels.

Signed-off-by: Herve Codina (Schneider Electric) <herve.codina@bootlin.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-11-09 15:08:53 +00:00
Billy Tsai
9d8b88ffb7 iio: adc: aspeed: Add AST2700 ADC support
This patch adds support for the ADCs found on the Aspeed AST2700 SoC,
which includes two instances: "ast2700-adc0" and "ast2700-adc1". While
they are functionally similar to those on AST2600, the OTP trimming data
is located at the same offset (0x820), but uses different bitfields.

Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-11-09 15:02:57 +00:00
Andy Shevchenko
69f5dcaa99 iio: common: scmi_sensors: Get rid of const_ilog2()
Fisrt of all, const_ilog2() was a workaround of some sparse issue,
which was never appeared in the C functions. Second, the calls here
are done against constants and work with a bit of luck. Replace
this altogether by a pre-calculated simple integer constant.
Amend a comment to give a hint where it comes from.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-11-09 14:58:56 +00:00
Rodrigo Gobbi
02f86101e4 iio: imu: bmi270: fix dev_err_probe error msg
The bmi270 can be connected to I2C or a SPI interface. If it is a SPI,
during probe, if devm_regmap_init() fails, it should print the "spi"
term rather "i2c".

Fixes: 92cc50a005 ("iio: imu: bmi270: Add spi driver for bmi270 imu")
Signed-off-by: Rodrigo Gobbi <rodrigo.gobbi.7@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-11-09 14:56:27 +00:00
Chu Guangqing
698dcf5428 iio: light: apds9960: convert to use maple tree register cache
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.

Signed-off-by: Chu Guangqing <chuguangqing@inspur.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-11-09 12:57:05 +00:00
Chu Guangqing
52d182b2ff iio: light: apds9306: convert to use maple tree register cache
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.

Signed-off-by: Chu Guangqing <chuguangqing@inspur.com>
Acked-by: Subhajit Ghosh <subhajit.ghosh@tweaklogic.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-11-09 12:57:05 +00:00
Chu Guangqing
00d3bd9e3f iio: light: veml3235: convert to use maple tree register cache
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.

Signed-off-by: Chu Guangqing <chuguangqing@inspur.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-11-09 12:57:05 +00:00
Chu Guangqing
e5191f62a6 iio: adc: ade9000: convert to use maple tree register cache
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.

Signed-off-by: Chu Guangqing <chuguangqing@inspur.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-11-09 12:57:05 +00:00
Kriish Sharma
49708f45be iio: backend: fix kernel-doc to avoid warnings and ensure consistency
Fix multiple kernel-doc warnings and make the documentation style
consistent in drivers/iio/industrialio-backend.c.

Changes include:
 - Add missing @chan parameter description in
   iio_backend_oversampling_ratio_set().
 - Add missing RETURNS section in iio_backend_get_priv().
 - Replace Return: with “RETURNS:” across the file for consistency.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506292344.HLJbrrgR-lkp@intel.com
Suggested-by: Andy Shevchenko <andy@kernel.org>
Suggested-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Kriish Sharma <kriish.sharma2006@gmail.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-11-09 12:57:05 +00:00