Vivien Didelot says:
====================
net: dsa: mv88e6xxx: program cross-chip bridging
The purpose of this patch series is to bring hardware cross-chip
bridging configuration to the DSA layer and the mv88e6xxx DSA driver.
Most recent Marvell switch chips have a Cross-chip Port Based VLAN Table
(PVT) used to restrict to which internal destination port an arbitrary
external source port is allowed to egress frames to.
The current behavior of the mv88e6xxx driver is to program this table
table with all ones, allowing any external ports to egress frames on any
internal ports. This means that carefully crafted Ethernet frames can
potentially bypass the user bridging configuration.
Patches 1 to 7 prepare the setup of this table and factorize the common
bits of both in-chip and cross-chip Marvell bridging code.
Patch 8 adds new optional cross-chip bridging operations to DSA switch.
Patch 9 switches the current behavior to program the table according to
the user bridging configuration when (cross-chip) ports get (un)bridged.
On a ZII Rev B board, bridging together the 3 user ports of both 88E6352
will result in the following PVTs on respectively switch 0 and switch 1:
External Internal Ports
Dev Port 0 1 2 3 4 5 6
1 0 * * * - - * *
1 1 * * * - - * *
1 2 * * * - - * *
1 3 - - - - - * *
1 4 - - - - - * *
1 5 * * * * * * *
1 6 * * * * * * *
0 0 * * * - - * *
0 1 * * * - - * *
0 2 * * * - - * *
0 3 - - - - - * *
0 4 - - - - - * *
0 5 * * * * * * *
0 6 * * * * * * *
Changes since v2:
- Define MV88E6XXX_MAX_PVT_SWITCHES and MV88E6XXX_MAX_PVT_PORTS
- use mv88e6xxx_g2_misc_4_bit_port instead of the 5-bit variant
- add Andrew's tags and reword commit 6/9
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement the DSA cross-chip bridging operations by remapping the local
ports an external source port can egress frames to, when this cross-chip
port joins or leaves a bridge.
The PVT is no longer configured with all ones allowing any external
frame to egress any local port. Only DSA and CPU ports, as well as
bridge group members, can egress frames on local ports.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce crosschip_bridge_{join,leave} operations in the dsa_switch_ops
structure, which can be used by switches supporting interconnection.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a local port of a switch chip becomes a member of a bridge group,
we need to reprogram the Cross-chip Port Based VLAN Table (PVT) to allow
existing cross-chip bridge members to egress frames on the new ports.
There is no functional changes yet, since the PVT is still programmed
with all ones, allowing any external port to egress frames locally.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Factorize the code in the DSA port_bridge_{join,leave} routines used to
program the port VLAN map of all local ports of a given bridge group.
At the same time shorten the _mv88e6xxx_port_based_vlan_map to get rid
of the old underscore prefix naming convention.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
All ports -- internal and external, for chips featuring a PVT -- have a
mask restricting to which internal ports a frame is allowed to egress.
Now that DSA exposes the number of ports and their bridge devices, it is
possible to extract the code generating the VLAN map and make it generic
so that it can be shared later with the cross-chip bridging code.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current code allocates DSA_MAX_PORTS ports for a Marvell dsa_switch
structure. Provide the exact number of ports so the corresponding
ds->num_ports is accurate.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Cross-chip Port Based VLAN Table (PVT) is currently initialized with
all ones, allowing any external ports to egress frames on local ports.
This commit implements the PVT access functions and programs the PVT
with all ones for the local switch ports only, instead of using the Init
operation. The current behavior is unchanged for the moment.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Cross-chip Port Based VLAN Table (PVT) supports two indexing modes,
one using 5-bit for device and 4-bit for port, the other using 4-bit for
device and 5-bit for port, configured via the Global 2 Misc register.
Only 4 bits for the source port are needed when interconnecting 88E6xxx
switch devices since they all support less than 16 physical ports. The
full 5 bits are needed when interconnecting a device with 98DXxxx switch
devices since they support more than 16 physical ports.
Add a mv88e6xxx_pvt_setup helper to set the 4-bit port PVT mode, which
will be extended later to also initialize the PVT content.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Not all Marvell switch chips feature a Cross-chip Port VLAN Table (PVT).
Chips with a PVT use the same implementation, so a new mv88e6xxx_ops
member won't be necessary yet. Add a "pvt" boolean member to the
mv88e6xxx_info structure and kill the obsolete MV88E6XXX_FLAGS_PVT flag.
Add a mv88e6xxx_has_pvt helper to wrap future checks of that condition.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Without this the generic cdc_ether grabs the device,
and does not really work.
Signed-off-by: René Rebe <rene@exactcode.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
ovs_flow_key_update() is called when the flow key is invalid, and it is
used to update and revalidate the flow key. Commit 329f45bc4f
("openvswitch: add mac_proto field to the flow key") introduces mac_proto
field to flow key and use it to determine whether the flow key is valid.
However, the commit does not update the code path in ovs_flow_key_update()
to revalidate the flow key which may cause BUG_ON() on execute_recirc().
This patch addresses the aforementioned issue.
Fixes: 329f45bc4f ("openvswitch: add mac_proto field to the flow key")
Signed-off-by: Yi-Hung Wei <yihung.wei@gmail.com>
Acked-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This driver uses interfaces from linux/of.h and linux/property.h but
relies on implict inclusion of those headers which means that changes in
other headers could break the build, as happened in -next for arm today.
Add a explicit includes.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current code only supports DT to check SFP present.
This patch adds ACPI support as well.
Signed-off-by: Daode Huang <huangdaode@hisilicon.com>
Reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The AVOIDBLOCK flag determines the Tx confirmation queues processing
to be redirected to any available CPU when the current one is slow
in processing them. This may result in a higher Tx confirmation
interrupt count but may reduce pressure on a certain CPU that with
the previous setting would process all Tx confirmation frames.
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Here are some small USB fixes for 4.11-rc5.
The usual xhci fixes are here, as well as a fix for
yet-another-bug-found-by-KASAN, those developers are doing great stuff
here. And there's a phy build warning fix that showed up in 4.11-rc1.
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWN/NGw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymNQQCeNiONvY70Y99hWFDX+PL896fV1rYAoNchYIZY
V4NYSVr43W4uk7jrUQD5
=NUT1
-----END PGP SIGNATURE-----
Merge tag 'usb-4.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for 4.11-rc5.
The usual xhci fixes are here, as well as a fix for yet-another-bug-
found-by-KASAN, those developers are doing great stuff here.
And there's a phy build warning fix that showed up in 4.11-rc1.
All of these have been in linux-next with no reported issues"
* tag 'usb-4.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: phy: isp1301: Fix build warning when CONFIG_OF is disabled
xhci: Manually give back cancelled URB if we can't queue it for cancel
xhci: Set URB actual length for stopped control transfers
xhci: plat: Register shutdown for xhci_plat
USB: fix linked-list corruption in rh_call_control()
Here are some small fixes for some serial drivers and Kconfig help text
for 4.11-rc5. Nothing major here at all, a few things resolving
reported bugs in some random serial drivers.
I don't think these made the last linux-next due to me getting to them
yesterday, but I am not sure, they might have snuck in. The patches
only affect drivers that the maintainers of sent me these patches for,
so we should be safe here :)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWN/ODw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yl5cwCfaBlkq7fOavwOENjXEGCsilXUNP0Anic5NQ5D
F26b+NwYZUO2MAQjZ2MP
=pS56
-----END PGP SIGNATURE-----
Merge tag 'tty-4.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some small fixes for some serial drivers and Kconfig help
text for 4.11-rc5. Nothing major here at all, a few things resolving
reported bugs in some random serial drivers.
I don't think these made the last linux-next due to me getting to them
yesterday, but I am not sure, they might have snuck in. The patches
only affect drivers that the maintainers of sent me these patches for,
so we should be safe here :)"
* tag 'tty-4.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: pl011: fix earlycon work-around for QDF2400 erratum 44
serial: 8250_EXAR: fix duplicate Kconfig text and add missing help text
tty/serial: atmel: fix TX path in atmel_console_write()
tty/serial: atmel: fix race condition (TX+DMA)
serial: mxs-auart: Fix baudrate calculation
This essentially reverts commit baf28d91e7 ("Input: bma150 - avoid
binding to bma180 if IIO bma180 driver present") and commit ef3714fdbc
("Input: bma150 - extend chip detection for bma180")
Rationale: initially (2012) the GTA04 device using a bma180 chip simply
referenced the bma150 platform driver in its board file [1] which happened
to work in all scenarios that were tested.
When conversion to DT started (2014), we needed to make the driver be still
recognised. Hence we introduced the compatibility to the bma180 chip in
Linux 3.15-rc5 [2] without further checks if it is really 100% compatible.
This worked flawlessly for years with the GTA04 device.
Recently (2016), Hans de Goede pointed out that the chips are not as
similar as they appeared and the driver works with the bma180 for the GTA04
only by good luck. He proposed to remove the bma180 support completely [3],
but we still did need it until we have a replacement. Thus, a conditional
compile was added.
We have now developed a generic iio-input-bridge which works with any 2 or
3 axis iio based accelerometer. It has been tested on GTA04 and Pyra and
works as expected. Therefore we can remove the bma180 support from this
driver completely. User-space API compatibility can be restored by using
the iio-input-bridge.
Maybe it is time to convert the bma150 driver to iio as well and retire the
accelerometer input drivers completely but this is a different story and
task.
[1]: https://github.com/neilbrown/linux/blob/gta04/3.2.y/arch/arm/mach-omap2/board-omap3gta04.c#L976
[2]: https://patchwork.kernel.org/patch/3961171/
[3]: https://patchwork.kernel.org/patch/9325481/
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
vxlan dev currently ignores lowerdev's gso_max_size, which adversely
affects TSO performance of liquidio if it's the lowerdev. Egress TCP
packets' skb->len often exceed liquidio's advertised gso_max_size. This
may happen on other NIC drivers.
Fix it by assigning lowerdev's gso_max_size to that of vxlan dev. Might as
well do likewise for gso_max_segs.
Single flow TSO throughput of liquidio as lowerdev (using iperf3):
Before the patch: 139 Mbps
After the patch : 8.68 Gbps
Percent increase: 6,144 %
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: Satanand Burla <satananda.burla@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Drop the unconditional setting of the '-Os' gcc flag from the ACPI
Makefile to make the function graph tracer work correctly with the
ACPI subsystem (Josh Poimboeuf).
- Add missing synchronize_rcu() to ghes_remove() which removes an
element from an RCU-protected list, but fails to synchronize it
properly afterward (James Morse).
- Fix two problems related to IOAPIC hotplug, a local variable
initialization in setup_res() and the creation of platform
device objects for IO(x)APICs which are (a) unused and (b) leaked
on hot-removal (Joerg Roedel).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=dCcJ
-----END PGP SIGNATURE-----
Merge tag 'acpi-4.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix two issues related to IOAPIC hotplug, an overzealous build
optimization that prevents the function graph tracer from working with
the ACPI subsystem correctly and an RCU synchronization issue in the
ACPI APEI code.
Specifics:
- drop the unconditional setting of the '-Os' gcc flag from the ACPI
Makefile to make the function graph tracer work correctly with the
ACPI subsystem (Josh Poimboeuf).
- add missing synchronize_rcu() to ghes_remove() which removes an
element from an RCU-protected list, but fails to synchronize it
properly afterward (James Morse).
- fix two problems related to IOAPIC hotplug, a local variable
initialization in setup_res() and the creation of platform device
objects for IO(x)APICs which are (a) unused and (b) leaked on
hot-removal (Joerg Roedel)"
* tag 'acpi-4.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: Fix incompatibility with mcount-based function graph tracing
ACPI / APEI: Add missing synchronize_rcu() on NOTIFY_SCI removal
ACPI: Do not create a platform_device for IOAPIC/IOxAPIC
ACPI: ioapic: Clear on-stack resource before using it
- Symbolic links from CPU directories to the corresponding cpufreq
policy directories in sysfs are not created during initialization
in some cases which confuses user space, so prevent that from
happening (Rafael Wysocki).
- The powernv cpuidle driver fails to pass a correct cpumaks to
the cpuidle core in some cases which causes subsequent failures
to occur, so fix it (Vaidyanathan Srinivasan).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=MRmB
-----END PGP SIGNATURE-----
Merge tag 'pm-4.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a cpufreq core issue with the initialization of the cpufreq
sysfs interface and a cpuidle powernv driver initialization issue.
Specifics:
- symbolic links from CPU directories to the corresponding cpufreq
policy directories in sysfs are not created during initialization
in some cases which confuses user space, so prevent that from
happening (Rafael Wysocki).
- the powernv cpuidle driver fails to pass a correct cpumaks to the
cpuidle core in some cases which causes subsequent failures to
occur, so fix it (Vaidyanathan Srinivasan)"
* tag 'pm-4.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpuidle: powernv: Pass correct drv->cpumask for registration
cpufreq: Fix creation of symbolic links to policy directories
Pull i2c fixes from Wolfram Sang:
"Two bugfixes from I2C, specifically the I2C mux section. Thanks to
peda for collecting them"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: mux: pca954x: Add missing pca9546 definition to chip_desc
Revert "i2c: mux: pca954x: Add ACPI support for pca954x"
- reading clk from driver vs. device tree [Vlad]
- Fix support for UIO in VDK platform [Alexey]
- SLC busy bit reading workaround
- build warning with kprobes header reorg
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=MIWw
-----END PGP SIGNATURE-----
Merge tag 'arc-4.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
"Accumulated fixes for ARC which I've been been sitting on for a while:
- reading clk from driver vs device tree [Vlad]
- fix support for UIO in VDK platform [Alexey]
- SLC busy bit reading workaround
- build warning with kprobes header reorg"
* tag 'arc-4.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: fix build warnings with !CONFIG_KPROBES
ARCv2: SLC: Make sure busy bit is set properly on SLC flushing
ARC: vdk: Fix support of UIO
ARCv2: make unimplemented vectors as no-ops rather than halt core
ARC: get rate from clk driver instead of reading device tree
ARC: [dts] add cpu nodes to ARCHS SMP device tree
ARC: [dts] add input clocks for cpu nodes
backchannel; fix. Also some minor refinements to the nfsd
version-setting interface that we'd like to get fixed before release.
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJY3weFAAoJECebzXlCjuG+fQYQAKh7QVB/vDZwvjWZ7OGSBhoe
LJfS1mzzf52MfQk6qNEM9to86qu+ywmH4XD2rvgMdif6Kc0qF1xBzzVEnp527lVW
nt1nLq/oIXeRl7a+5p+FxTnqHn0OBH+iCnxcVZI8tvHgptpR+6TwEzR36k4n4esN
kvNrrv9dFIoBGx0nSBScHTC3zNArU+C9oZTTHAuPJICNBHsOMqYF7sSAXPg9NFR+
HnowZfGWWXpSnWZ9DaM14Zb/dX0B9Pexv1MsgfiKYS9Beh7g4JN48+CHtWyVliwd
M/LVBpT2ZwFM/NzvJ2exVIqm/hwj4El2Sjy67XHwQzDvGjnUn/fz55SfXfzZSMyD
PMj+IeHKuT3jipNui1AXAlzYEz8gPvuKQ0vQ0vVuNX4Ln28KydGwvVTkUNltDnfq
E7L7RI6mj03OY1j1p6zeK6UJeueZq1gmjfq1NVTPO+TgQFPhh8A50NsDEVcaiwNN
W8uX7Qa39y79BT+4OFuYL05AbuqxKR+nAmCbVSLy9Kq4sc/6/YErBZtXXAghzPPl
4Es4tzlAd8skkxWlcVeCeUqPfcDCqHL6xKqa62m5wUuYXmqPtIMyAyVutF4lWpH/
dAV5Lcjz7HeQnpCgFZXXtIQW5OIIfFa08s0f7fuFm+uxz+nM/x8gg99tuwWP6OsT
Za7EtdB84M1ZGgjO3JhY
=oi0+
-----END PGP SIGNATURE-----
Merge tag 'nfsd-4.11-1' of git://linux-nfs.org/~bfields/linux
Pull nfsd fixes from Bruce Fields:
"The restriction of NFSv4 to TCP went overboard and also broke the
backchannel; fix.
Also some minor refinements to the nfsd version-setting interface that
we'd like to get fixed before release"
* tag 'nfsd-4.11-1' of git://linux-nfs.org/~bfields/linux:
svcrdma: set XPT_CONG_CTRL flag for bc xprt
NFSD: fix nfsd_reset_versions for NFSv4.
NFSD: fix nfsd_minorversion(.., NFSD_AVAIL)
NFSD: further refinement of content of /proc/fs/nfsd/versions
nfsd: map the ENOKEY to nfserr_perm for avoiding warning
SUNRPC/backchanel: set XPT_CONG_CTRL flag for bc xprt
Simple integer for interrupt number is not expressive enough, as it does
not convey interrupt trigger type that should be used. Let's allow
attaching array of resources to the board info and have i2c core parse
first IRQ resource and set up interrupt trigger as needed.
Reviewed-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This will allow marking device property lists as __initdata, the same as
board info structures themselves.
Reviewed-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
i2c bus has 2 different types of device belonging to the same bus and
bus notifiers use device type to distinguish between adapters and clients.
Previously we only had i2c_adapter_type exported, which made code wanting
to work with i2c_client devices test for type not equal to adapter type.
This unfortunately is not safe if we ever add another type to the bus,
so let's export i2c_client_type as well.
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add basic thermal driver for bcm2835 SoC.
This driver currently make sure that tsense HW block is set up
correctly.
Tested-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Acked-by: Eric Anholt <eric@anholt.net>
Acked-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Add a thermal zone in order to make the example complete.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Aspeed BMC SoCs include a 16 channel, 10-bit ADC. Low and high threshold
interrupts are supported by the hardware but are not currently implemented.
Signed-off-by: Rick Altherr <raltherr@google.com>
Tested-by: Xo Wang <xow@google.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Rick Altherr <raltherr@google.com>
Acked-by: Joel Stanley <joel@jms.id.au>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
New features:
- Beautify the statx syscall arguments in 'perf trace' (Arnaldo Carvalho de Melo)
e.g.:
System wide strace like session:
# trace -e statx
16612.967 ( 0.028 ms): statx/4562 statx(dfd: CWD, filename: /tmp/statx, flags: SYMLINK_NOFOLLOW, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7ffef195d660) = 0
36050.891 ( 0.007 ms): statx/4576 statx(dfd: CWD, filename: /etc/passwd, flags: SYMLINK_NOFOLLOW|STATX_DONT_SYNC, mask: BTIME, buffer: 0x7ffda9bf50f0) = 0
^C#
User visible:
- Handle unpaired raw_syscalls:sys_exit events in 'perf trace', i.e. we
shouldn't try to calculate duration or print the timestamp for a missing
matching raw_syscalls:sys_enter (Arnaldo Carvalho de Melo)
- Do not print "cycles: 0" in perf report LBR lines in platforms not
supporting 'cycles', such as Intel's Broadwell (Jin Yao)
- Handle missing $HOME env var (Jiri Olsa)
- Map 8-bit registers (al, bl, etc), not supported in uprobes_events, to
the next best thing (ax, bx, etc) supported (Ravi Bangoria)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=cpqq
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-4.12-20170331' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
New features:
- Beautify the statx syscall arguments in 'perf trace' (Arnaldo Carvalho de Melo)
e.g.:
System wide strace like session:
# trace -e statx
16612.967 ( 0.028 ms): statx/4562 statx(dfd: CWD, filename: /tmp/statx, flags: SYMLINK_NOFOLLOW, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7ffef195d660) = 0
36050.891 ( 0.007 ms): statx/4576 statx(dfd: CWD, filename: /etc/passwd, flags: SYMLINK_NOFOLLOW|STATX_DONT_SYNC, mask: BTIME, buffer: 0x7ffda9bf50f0) = 0
^C#
User visible changes:
- Handle unpaired raw_syscalls:sys_exit events in 'perf trace', i.e. we
shouldn't try to calculate duration or print the timestamp for a missing
matching raw_syscalls:sys_enter (Arnaldo Carvalho de Melo)
- Do not print "cycles: 0" in perf report LBR lines in platforms not
supporting 'cycles', such as Intel's Broadwell (Jin Yao)
- Handle missing $HOME env var (Jiri Olsa)
- Map 8-bit registers (al, bl, etc), not supported in uprobes_events, to
the next best thing (ax, bx, etc) supported (Ravi Bangoria)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
As the event_attrs field of iio_info structures is constant, so these
attribute_group structures can also be declared constant.
File size before:
text data bss dec hex filename
15064 1528 0 16592 40d0
drivers/staging/iio/light/tsl2x7x_core.o
File size after:
text data bss dec hex filename
15192 1400 0 16592 40d0
drivers/staging/iio/light/tsl2x7x_core.o
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Check for attribute_group structures that are only stored in the
attrs filed of iio_info structure. As the attrs field of iio_info
structures is constant, so these attribute_group structures can also be
declared constant.
Done using coccinelle:
@r1 disable optional_qualifier @
identifier i;
position p;
@@
static struct attribute_group i@p = {...};
@ok1@
identifier r1.i;
position p;
struct iio_info x;
@@
x.attrs=&i@p;
@bad@
position p!={r1.p,ok1.p};
identifier r1.i;
@@
i@p
@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
static
+const
struct attribute_group i={...};
@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
+const
struct attribute_group i;
File size before:
text data bss dec hex filename
3042 480 0 3522 dc2 drivers/iio/adc/hx711.o
File size after:
text data bss dec hex filename
3098 416 0 3514 dba drivers/iio/adc/hx711.o
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Check for attribute_group structures that are only stored in the
attrs filed of iio_info structure. As the attrs field of iio_info
structures is constant, so these attribute_group structures can also be
declared constant.
Done using coccinelle:
@r1 disable optional_qualifier @
identifier i;
position p;
@@
static struct attribute_group i@p = {...};
@ok1@
identifier r1.i;
position p;
struct iio_info x;
@@
x.attrs=&i@p;
@bad@
position p!={r1.p,ok1.p};
identifier r1.i;
@@
i@p
@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
static
+const
struct attribute_group i={...};
@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
+const
struct attribute_group i;
File size before:
text data bss dec hex filename
3459 488 0 3947 f6b drivers/iio/humidity/hdc100x.o
File size after:
text data bss dec hex filename
3507 424 0 3931 f5b drivers/iio/humidity/hdc100x.o
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Check for attribute_group structures that are only stored in the
attrs filed of iio_info structure. As the attrs field of iio_info
structures is constant, so these attribute_group structures can also be
declared constant.
Done using coccinelle:
@r1 disable optional_qualifier @
identifier i;
position p;
@@
static struct attribute_group i@p = {...};
@ok1@
identifier r1.i;
position p;
struct iio_info x;
@@
x.attrs=&i@p;
@bad@
position p!={r1.p,ok1.p};
identifier r1.i;
@@
i@p
@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
static
+const
struct attribute_group i={...};
@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
+const
struct attribute_group i;
File size before:
text data bss dec hex filename
8503 488 0 8991 231f drivers/iio/light/apds9960.o
File size after:
text data bss dec hex filename
8567 424 0 8991 231f drivers/iio/light/apds9960.o
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Check for attribute_group structures that are only stored in the
attrs filed of iio_info structure. As the attrs field of iio_info
structures is constant, so these attribute_group structures can also be
declared constant.
Done using coccinelle:
@r1 disable optional_qualifier @
identifier i;
position p;
@@
static struct attribute_group i@p = {...};
@ok1@
identifier r1.i;
position p;
struct iio_info x;
@@
x.attrs=&i@p;
@bad@
position p!={r1.p,ok1.p};
identifier r1.i;
@@
i@p
@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
static
+const
struct attribute_group i={...};
@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
+const
struct attribute_group i;
File size before:
text data bss dec hex filename
2276 352 0 2628 a44 drivers/iio/light/bh1750.o
File size after:
text data bss dec hex filename
2340 320 0 2660 a64 drivers/iio/light/bh1750.o
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Check for attribute_group structures that are only stored in the
attrs filed of iio_info structure. As the attrs field of iio_info
structures is constant, so these attribute_group structures can also be
declared constant.
Done using coccinelle:
@r1 disable optional_qualifier @
identifier i;
position p;
@@
static struct attribute_group i@p = {...};
@ok1@
identifier r1.i;
position p;
struct iio_info x;
@@
x.attrs=&i@p;
@bad@
position p!={r1.p,ok1.p};
identifier r1.i;
@@
i@p
@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
static
+const
struct attribute_group i={...};
@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
+const
struct attribute_group i;
File size before:
text data bss dec hex filename
4037 288 0 4325 10e5 drivers/iio/proximity/as3935.o
File size after:
text data bss dec hex filename
4101 256 0 4357 1105 drivers/iio/proximity/as3935.o
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Not all user space application is ready to handle wide addresses. It's
known that at least some JIT compilers use higher bits in pointers to
encode their information. It collides with valid pointers with 512TB
addresses and leads to crashes.
To mitigate this, we are not going to allocate virtual address space
above 128TB by default.
But userspace can ask for allocation from full address space by
specifying hint address (with or without MAP_FIXED) above 128TB.
If hint address set above 128TB, but MAP_FIXED is not specified, we try
to look for unmapped area by specified address. If it's already
occupied, we look for unmapped area in *full* address space, rather than
from 128TB window.
This approach helps to easily make application's memory allocator aware
about large address space without manually tracking allocated virtual
address space.
This is going to be a per mmap decision. ie, we can have some mmaps with
larger addresses and other that do not.
A sample memory layout looks like:
10000000-10010000 r-xp 00000000 fc:00 9057045 /home/max_addr_512TB
10010000-10020000 r--p 00000000 fc:00 9057045 /home/max_addr_512TB
10020000-10030000 rw-p 00010000 fc:00 9057045 /home/max_addr_512TB
10029630000-10029660000 rw-p 00000000 00:00 0 [heap]
7fff834a0000-7fff834b0000 rw-p 00000000 00:00 0
7fff834b0000-7fff83670000 r-xp 00000000 fc:00 9177190 /lib/powerpc64le-linux-gnu/libc-2.23.so
7fff83670000-7fff83680000 r--p 001b0000 fc:00 9177190 /lib/powerpc64le-linux-gnu/libc-2.23.so
7fff83680000-7fff83690000 rw-p 001c0000 fc:00 9177190 /lib/powerpc64le-linux-gnu/libc-2.23.so
7fff83690000-7fff836a0000 rw-p 00000000 00:00 0
7fff836a0000-7fff836c0000 r-xp 00000000 00:00 0 [vdso]
7fff836c0000-7fff83700000 r-xp 00000000 fc:00 9177193 /lib/powerpc64le-linux-gnu/ld-2.23.so
7fff83700000-7fff83710000 r--p 00030000 fc:00 9177193 /lib/powerpc64le-linux-gnu/ld-2.23.so
7fff83710000-7fff83720000 rw-p 00040000 fc:00 9177193 /lib/powerpc64le-linux-gnu/ld-2.23.so
7fffdccf0000-7fffdcd20000 rw-p 00000000 00:00 0 [stack]
1000000000000-1000000010000 rw-p 00000000 00:00 0
1ffff83710000-1ffff83720000 rw-p 00000000 00:00 0
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Now that we use all the available virtual address range, we need to make
sure we don't generate VSID such that it overlaps with the reserved vsid
range. Reserved vsid range include the virtual address range used by the
adjunct partition and also the VRMA virtual segment. We find the context
value that can result in generating such a VSID and reserve it early in
boot.
We don't look at the adjunct range, because for now we disable the
adjunct usage in a Linux LPAR via CAS interface.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[mpe: Rewrite hash__reserve_context_id(), move the rest into pseries]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We optmize the slice page size array copy to paca by copying only the
range based on addr_limit. This will require us to not look at page size
array beyond addr_limit in PACA on slb fault. To enable that copy task
size to paca which will be used during slb fault.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[mpe: Rename from task_size to addr_limit, consolidate #ifdefs]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In the followup patch, we will increase the slice array size to handle
512TB range, but will limit the max addr to 128TB. Avoid doing
unnecessary computation and avoid doing slice mask related operation
above address limit.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The work-around for the Qualcomm Datacenter Technologies QDF2400
erratum 44 sets the "qdf2400_e44_present" global variable if the
work-around is needed. However, this check does not happen until after
earlycon is initialized, which means the work-around is not
used, and the console hangs as soon as it displays one character.
Fixes: d8a4995bce ("tty: pl011: Work around QDF2400 E44 stuck BUSY bit")
Signed-off-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
write_used was introduced with commit 884b600f63 ("[PATCH] USB: fix acm
trouble with terminals") but never used since.
Signed-off-by: Tobias Herzog <t-herzog@gmx.de>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adds a similar log message to USB_CDC_NOTIFY_SERIAL_STATE as it is
already done with USB_CDC_NOTIFY_NETWORK_CONNECTION.
Signed-off-by: Tobias Herzog <t-herzog@gmx.de>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB devices may have very limited endpoint packet sizes, so that
notifications can not be transferred within one single usb packet.
Reassembling of multiple packages may be necessary.
Signed-off-by: Tobias Herzog <t-herzog@gmx.de>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Notifications may only be 8 bytes long. Accessing the 9th and
10th byte of unimplemented/unknown notifications may be insecure.
Also check the length of known notifications before accessing anything
behind the 8th byte.
Signed-off-by: Tobias Herzog <t-herzog@gmx.de>
Acked-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With the previous unsigned long value clang generates warnings like
this:
sound/pci/hda/patch_ca0132.c:860:37: error: implicit conversion from
'unsigned long' to 'u32' (aka 'unsigned int') changes value from
18446744073709551615 to 4294967295 [-Werror,-Wconstant-conversion]
spec->curr_chip_addx = (res < 0) ? ~0UL : chip_addx;
~ ^~~~
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>